Electrostatic Precipitators (ESPs) - Alstom (1).pdf
-
Upload
anonymous-ul3jlwfh -
Category
Documents
-
view
224 -
download
0
Transcript of Electrostatic Precipitators (ESPs) - Alstom (1).pdf
-
8/10/2019 Electrostatic Precipitators (ESPs) - Alstom (1).pdf
1/2
ALSTOM 2013. All rights reserved. Information contained in this document is indicative only. No representation or warranty is given or should berelied on that it is complete or correct or will apply to any particular project. This will depend on the technical and commercial circumstances. It isprovided without liability and is subject to change without notice. Reproduction, use or disclosure to third parties, without express written authority,is strictly prohibited. Photo credits: ALSTOM 2013. All rights reserved. Printed on environmentally friendly paper.
Alstoms wide range
of Electrostatic
Precipitators (ESP)
designs offer the best
fit for all applications,
optimising emission
compliance and
saving power.
Meeting the most stringent regulationwith the lowest costElectrostatic Precipitators (ESP) are widely accepted across the world as aneffective system for particulate emissions control. Alstom ElectrostaticPrecipitators, offer a reliable solution to the demands of increasingly strictregulations for particulate matter emissions worldwide, at the lowestlifecycle cost.
ESPs work by creating a high voltage electrical field (corona) around the discharge
electrodes, which causes the gases and the dust particles being carried by the gases,to get ionised. The dust particles, once charged, migrate to and deposit themselveson the neutral collecting plates, from which they are dislodged by periodic rapping andguided to dust hoppers for removal.
Alstom offers a wide range of ESP designs, with a choice of discharge electrodes andrapping systems, to provide the most cost effective, technically reliable solution forevery application.
APPLICATIONS
Power and industrial boilers firing coal, lignite, oil, orimulsion, biomass andother fuels
Various processes in iron and steel and non-ferrous metallurgical industries,cement industry, incineration plants, glass smelting and pulp & paper plants, etc.
AIR QUALITY CONTROLSOLUTIONS
Electrostatic PrecipitatorsEffectively improving the environment
Customer benefits
HIGH PARTICULATE REMOVAL
EFFICIENCY
Emission levels less than 10 mg/Nm3.
CUSTOMISATIONChoice of discharge electrodes
customised to specific demands of
various applications.
INCREASED AVAILABILITY
Robust design and construction
ensures reliability.
REDUCED COMPLIANCE COSTS
Integrated control system optimises
power savings while maximising
performance.
LOWER INVESTMENT
Easy to install due to flexible layout
and modular design.
PROVEN DESIGN
Proven technology fine tuned with
global experience and a large installed
base.
-
8/10/2019 Electrostatic Precipitators (ESPs) - Alstom (1).pdf
2/2
LOWERING
ENVIRONMENTAL FOOTPRINT