electronic cash register tk-7000/7500 user's manual
Transcript of electronic cash register tk-7000/7500 user's manual
7~00REG C01
7%00
REG C01
APPLE-
PIE
COFFEE
ELECTRONIC CASH REGISTER
TK-7000/7500
USER'S MANUAL
FRENCH-
FRIED
SANDWICH
ICE CREAM
Eu Di U.K.
CI Canada
2
Notes for TK-7000-1/7500-1
Casio Electronics Co., Ltd.Unit 6, 1000 North Circular RoadLondon NW2 7JD, U.K.
WARNING: This is a Class A product. In a domestic environment this product may cause radiointerference in which case the user may be required to take adequate measures.
Please keep all information for future reference.
Notes for TK-7000/7500
GUIDELINES LAID DOWN BY FCC RULES FOR USE OF THE UNIT IN THE U.S.A.(Not applicable to other areas)
WARNING: This equipment has been tested and found to comply with the limits for a Class A digital device,pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection againstharmful interference when the equipment is operated in a commercial environment. This equipment generates,uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructionmanual, may cause harmful interference to radio communications. Operation of this equipment in a residentialarea is likely to cause harmful interference in which case the user will be required to correct the interference athis own expense.
FCC WARNING: Changes or modifications not expressly approved by the party responsible for compliancecould void the user’s authority to operate the equipment.
The main plug on this equipment must be used to disconnect mains power.Please ensure that the socket outlet is installed near the equipment and shall be easilyaccessible.
IntroductionCongratulations on your selection of a CASIO TK-7000/7500 series electronic cash register. This ECR is theproduct of the world's most advanced electronic technology, for outstanding versatility and reliability.Simplified operation is made possible by a specially designed keyboard layout and a wide selection ofautomated, programmable functions.A specially designed keyboard layout and a bright, easy-to-read display help to take the fatigue out of longhours operation.
Introduction & Contents
3
Intr
oduc
tion
& C
onte
nts
TK-7000/7500 User's Manual
Do not locate the cash register where it will besubjected to direct sunlight, high humidity,splashing with water or other liquids, or hightemperature (such as near a heater).
Never try to open the cash register or attemptyour own repairs. Take the cash register to yourauthorized CASIO dealer for repairs.
Use a soft, dry cloth to clean the exterior of thecash register. Never use benzene, thinner, orany other volatile agent.
Never operate the cash register while yourhands are wet.
Be sure to check the sticker on the side of thecash register to make sure that its voltagematches that of the power supply in the area.
Important!Your new cash register has been carefully tested before shipment to ensure proper operation. Safetydevices eliminate worries about breakdowns resulting from operator errors or improper handling. Inorder to ensure years of trouble-free operation, however, the following points should be noted whenhandling the cash register.
4
Introduction & Contents
Introduction & Contents ........................................................................................................ .... 2Remove the cash register from its box. ..................................................................................................8Remove the tape holding parts of the cash register in place. ................................................................8Remove the cash drawer from its box. ...................................................................................................8Connect the drawer. ...............................................................................................................................8
Getting Started ................................................................................................................ ........... 8Mount the cash register. .........................................................................................................................9Plug the cash register into a wall outlet. .................................................................................................9Insert the mode key marked “OW” into the mode switch. ......................................................................9Install receipt/journal paper. .................................................................................................................10Set the date. .........................................................................................................................................12Set the time. ..........................................................................................................................................12
Introducing TK-7000/7500 ....................................................................................................... 14General guide .......................................................................................................................................14Display ..................................................................................................................................................18Keyboard (TK-7000) .............................................................................................................................20Keyboard (TK-7500) .............................................................................................................................22Allocatable functions .............................................................................................................................24How to remove/replace the sheet holder (TK-7000 only) ....................................................................26How to install a menu sheet in the sheet holder (TK-7000 only) .........................................................27
Basic Operations and Setups ................................................................................................. 28How to read the printouts ............................................................................................................... 28How to use your cash register ........................................................................................................ 29
Assigning a clerk ..................................................................................................................................30Clerk button ................................................................................................................................. 30Clerk lock/clerk key...................................................................................................................... 30Clerk secret number key ............................................................................................................. 30
Displaying the time and date ................................................................................................................31To display and clear the date/time ............................................................................................... 31
Preparing coins for change...................................................................................................................31Preparing and using department/flat-PLU keys ............................................................................. 32
Registering department/flat-PLU keys..................................................................................................32Programming department/flat-PLU keys ..............................................................................................33
To program a unit price for each department/flat-PLU ................................................................ 33To program the tax calculation status for each department/flat-PLU .......................................... 33To program high amount limit for each department/flat-PLU ...................................................... 34
Registering department/flat-PLU keys by programming data ..............................................................35Preset price ................................................................................................................................. 35Preset tax status .......................................................................................................................... 35Locking out high amount limitation .............................................................................................. 35
Preparing and using PLUs ............................................................................................................. 36Programming PLUs ..............................................................................................................................36
To program a unit price for each PLU ......................................................................................... 36To program tax calculation status for each PLU ......................................................................... 36
Registering PLUs ..................................................................................................................................37Shifting the taxable status of an item ............................................................................................. 39
Calculation merchandise subtotal ........................................................................................................39Preparing and using discounts ....................................................................................................... 40
Programming discounts ........................................................................................................................40Registering discounts ...........................................................................................................................40
Discount for items and subtotals ................................................................................................. 40Preparing and using reductions ..................................................................................................... 41
Programming for reductions .................................................................................................................41To program preset reduction amount .......................................................................................... 41
Registering reductions ..........................................................................................................................41Reduction for items...................................................................................................................... 41Reduction for subtotal ................................................................................................................. 42
5
Intr
oduc
tion
& C
onte
nts
TK-7000/7500 User's Manual
Registering credit and check payments ......................................................................................... 43Check ........................................................................................................................................... 43Credit ........................................................................................................................................... 43Mixed tender (cash, credit and check) ........................................................................................ 43
Registering both the Euro and the local currency .......................................................................... 44Validation printing ........................................................................................................................... 46
Total amount validation ................................................................................................................ 46Validation sample ........................................................................................................................ 46
Registering returned goods in the REG mode ............................................................................... 47Registering returned goods in the RF mode .................................................................................. 47
Normal refund transaction ....................................................................................................................47Reduction of amounts paid on refund ..................................................................................................48
Registering money received on account ........................................................................................ 48Registering money paid out ........................................................................................................... 48Registering loan amounts .............................................................................................................. 49Registering pick up amounts .......................................................................................................... 49Changing media in drawer ............................................................................................................. 49Making corrections in a registration ............................................................................................... 50
To correct an item you input but not yet registered ..............................................................................50To correct an item you input and registered .........................................................................................51To cancel all items in a transaction.......................................................................................................52
No sale registration ........................................................................................................................ 52Printing the daily sales reset report ................................................................................................ 53
Advanced Operations ............................................................................................................ .. 54Stock check .................................................................................................................................... 54Clerk interrupt function ................................................................................................................... 54Single item cash sales.................................................................................................................... 55Addition .......................................................................................................................................... 56
Addition (plus) .......................................................................................................................................56Premium (%+) .......................................................................................................................................57
Tray total ......................................................................................................................................... 58Tray total premium/discount .................................................................................................................58Multiple item totalling function ..............................................................................................................58
Coupon transactions ...................................................................................................................... 59Coupon registration using <COUPON> (coupon key) .........................................................................59Coupon registration using <COUPON2> (coupon 2 key) ....................................................................59
Registering the second unit price ................................................................................................... 60Preset tender amount ..................................................................................................................... 61Bottle link operation ........................................................................................................................ 62
Bottle returns ........................................................................................................................................62Bottle return key .......................................................................................................................... 62
Arrangement key registrations ....................................................................................................... 63Set menu ........................................................................................................................................ 63Currency exchange function .......................................................................................................... 64
Registering foreign currency ................................................................................................................64Full amount tender in foreign currency ........................................................................................ 64Partial tender in a foreign currency ............................................................................................. 65
6
Introduction & Contents
Food stamp function ....................................................................................................................... 66Food stamp registration ........................................................................................................................66
No change due ............................................................................................................................ 66Mixed food stamp/cash change................................................................................................... 67
Food stamp registration (Illinois rule) ...................................................................................................69No change due ............................................................................................................................ 69Mixed food stamp/cash change................................................................................................... 71
Electronic benefits transfer ...................................................................................................................75About mixed EBT card tenders ................................................................................................... 75No change due ............................................................................................................................ 75
Tips ................................................................................................................................................. 76Inputting the number of customers................................................................................................. 77Text recall ....................................................................................................................................... 78Temporarily releasing compulsion .................................................................................................. 78Printing slip ..................................................................................................................................... 79
Printing slips .........................................................................................................................................79To perform auto batch printing 1.................................................................................................. 80To perform auto batch printing 2.................................................................................................. 80About the maximum number of slip lines .................................................................................... 80
Check tracking systems ................................................................................................................. 80Check tracking system .........................................................................................................................80
Opening a check .......................................................................................................................... 81Adding to a check ........................................................................................................................ 81Issuing a guest receipt ................................................................................................................ 82Closing a check memory ............................................................................................................. 82New/old check key operation ...................................................................................................... 83Add check .................................................................................................................................... 84Separate check ............................................................................................................................ 85Clerk transfer ............................................................................................................................... 86Table transfer ............................................................................................................................... 86
Price reductions (red price) ............................................................................................................ 87Condiment/preparation PLUs ......................................................................................................... 88VAT breakdown printing.................................................................................................................. 89Deposit registrations....................................................................................................................... 89
Deposit from customer ................................................................................................................ 89Deposit from customer during sales transaction ......................................................................... 89
Bill copy .......................................................................................................................................... 90Actual stock quantity inquiry ........................................................................................................... 91Unit price inquiry ............................................................................................................................. 91Previous item void using <review>................................................................................................. 92Scanning PLU ................................................................................................................................ 93
Item registration ....................................................................................................................................93By scanner/code input/one touch NLU key ................................................................................. 93Not found PLU ............................................................................................................................. 93
Programming to clerk ..................................................................................................................... 94Programming clerk number ..................................................................................................................94Programming trainee status .................................................................................................................94Programming commission rate .............................................................................................................94
Programming descriptors and messages....................................................................................... 95Programming receipt message and clerk name ...................................................................................95
Machine number .......................................................................................................................... 95Programming department/transaction key descriptor ..........................................................................97Programming flat-PLU descriptor .........................................................................................................98
7
Intr
oduc
tion
& C
onte
nts
TK-7000/7500 User's Manual
Entering characters ........................................................................................................................ 99Using character keyboard.....................................................................................................................99Entering characters by code ...............................................................................................................100
Character code list ..................................................................................................................... 100Editing characters ...............................................................................................................................101Editing characters ...............................................................................................................................101
Printing read/reset reports ............................................................................................................ 102To print the individual department, PLU/flat-PLU read report ............................................................102To print the financial read report .........................................................................................................103To print the individual clerk read/reset report .....................................................................................103To print the daily sales read/reset report ............................................................................................104To print the PLU/flat-PLU read/reset report ........................................................................................106To print the hourly sales read/reset report ..........................................................................................106To print the monthly sales read/reset report .......................................................................................107To print the group read/reset report ....................................................................................................107To print the periodic 1/2 sales read/reset reports ...............................................................................108To print other sales read/reset reports ............................................................................................... 110
Reading the cash register's program ............................................................................................ 111To print unit price/rate program (except PLU/scanning PLU)............................................................. 111To print key descriptor, name, message program (except PLU) ........................................................ 112To print the PLU/flat-PLU program ..................................................................................................... 113
Troubleshooting ................................................................................................................ ..... 114When an error occurs .................................................................................................................... 114When the register does not operate at all ..................................................................................... 116Clearing a machine lock up ........................................................................................................... 117In case of power failure ................................................................................................................. 117
User Maintenance and Options ............................................................................................ 118To replace the ink ribbon ............................................................................................................... 118To replace journal paper ................................................................................................................ 119To replace receipt paper ............................................................................................................... 120To replenish the stamp ink ........................................................................................................... 120Options ......................................................................................................................................... 120
Specifications ................................................................................................................. ........ 121Index .......................................................................................................................... .............. 122
8
This section outlines how to unpack the cash register and get it ready to operate. You should read this part ofthe manual even if you have used a cash register before. The following is the basic set up procedure, along withpage references where you should look for more details.
Remove the cash register from its box.
Remove the tape holding partsof the cash register in place.Also remove the small plastic bag taped to theprinter cover. Inside you will find the modekeys.
Remove the cash drawer from its box.The cash register and cash drawer are packed separately.
Connect the drawer.
1. Connect drawer connector (three color lead ondrawer) to the cash register.
2. Connect frame drawer connector (green lead ondrawer) to the cash register.
Getting Started
1.
2.
3.
4.
9
Get
ting
Sta
rted
TK-7000/7500 User’s Manual
Mount the cash register.
1. Screw in 2 fixing screws bottom side of theregister.
2. Stick rubbor plate on the each corner of thebottom side of the register.
3. Mount the cash register on the top of thedrawer, ensuring that the feet on the bottom ofthe cash register go into the holes on thedrawer.
Plug the cash register into a walloutlet.Be sure to check the sticker on the side of the cashregister to make sure that its voltage matches that ofthe power supply in your area. The printer willoperate for a few seconds. Please do not pass thepower cable under the drawer.
Insert the mode key marked“OW” into the mode switch.
5.
6.
7.X1
Z1
X2/Z2
REG2
REG1
OFF
RF
PGM
C-A32
2
2
22
11
10
Getting Started
REG2 X1
REG1 Z1
OFF X2/Z2
RF
PGM
Install receipt/journal paper.
Loading journal paper
The same type of paper (45 mm × 83 mm i.d.) is used for receipts and journal. Load the new paperbefore first operating the cash register or when red paper appears from the printer.
11111Use a mode key to set themode switch to REG1position.
22222Open the printer coverusing the printer coverkey.
33333Cut off the leading end ofthe paper so it is even.
44444Ensuring the paper isbeing fed from the bottomof the roll, lower the rollinto the space behind theprinter.
55555Drop the paper roll gentlyand insert paper to thepaper inlet.
66666Press the j key untilabout 20 cm to 30 cm ofpaper is fed from theprinter.
77777Slide the leading end ofthe paper into the grooveon the spindle of the take-up reel and wind it ontothe reel two or three turns.
8.
11
Get
ting
Sta
rted
TK-7000/7500 User’s Manual
Loading receipt paper
Follow steps 11111 through 33333 under “Loading journal paper” on theprevious page.
Important!Never operate the cash register without paper. It can damage the printer.
44444Ensuring the paper isbeing fed from thebottom of the roll, lowerthe roll into the spacebehind the printer.
55555Drop the paper roll gentlyand insert paper to thepaper inlet.
66666Press the f key untilabout 20 cm to 30 cm ofpaper is fed from theprinter.
77777Set the printer cover,passing the leading end ofthe paper through thepaper outlet. Close theprinter cover and tear offthe excess paper.
88888Place the take-up reel intoplace behind the printer,above the roll paper.
99999Press the j key to takeup any slack in the paper.
00000Close the printer cover.
12
Getting Started
6 1s 6 : : : : : : 6 6 CCurrent date
Example: April 3, 2000 2 000403
X1
Z1
X2/Z2
REG2
REG1
OFF
RF
PGMMode Switch
Year Month Day
x or
X
6 1s 6 : : : : 6 6 CCurrent time
Example:
08:20 AM 2 0820 09:45 PM 2 2145
X1
Z1
X2/Z2
REG2
REG1
OFF
RF
PGMMode Switch
(24-hour military time)
x or
X
Set the date.9.
Set the time.10.
13
Get
ting
Sta
rted
TK-7000/7500 User’s Manual
14
Pop-up display
Main display
Mode switch
Keyboard
Menu sheet holder
Drawer
Drawer lock
Take-up reel
Roll paper
Printer
Printer ink ribbon
Printer sub cover
Printer cover
Printer cover key
Roll paperYou can use the roll paper to print receipts and ajournal (pages 10 ~ 11).
Printer ink ribbonProvides ink for printing of registration details on theroll paper (page 118).
RECEIPTON/OFF
Indicator
General guideThis part of the manual introduces you to the cash register and provides a general explanation of its variousparts.
TK-7000
(with slit drawer)
Receipt on/off switch / keyUse the receipt on/off switch/key in REG1, REG2 andRF modes to control issuance of receipts. In othermodes, receipts or reports are printed regardless thereceipt switch/key setting.A post-finalization receipt can still be issued afterfinalization when the switch/key is set to off. The cashregister can also be programmed to issue a post-finali-zation receipt even when the switch/key is set to on.
RECEIPTON/OFF
RCT
8(Indicator
Receipt on/off switch
Receipt on/off key
When the register issues receipts, this indicator is lit.
Introducing TK-7000/7500
15
Intro
duci
ng T
K-7
000/
7500
TK-7000/7500 User’s Manual
Pop-up display
Main display
Mode switch
Keyboard
Wetproof cover
Drawer
Drawer lock
Take-up reel
Roll paper
Printer
Printer ink ribbon
Printer sub cover
Printer cover
Printer cover key
Mode key (for U.K., U.S. and Canada)The following four types of mode keys are providedwith the unit in the United Kingdom, the United Statesand Canada.
OWC-A32
MC-A08
O PC-A02
MC-A08
OPC-A02
PGMC-A32
OWC-A08
TK-7500
(with slit drawer)
a. OP (Operator) keySwitches between OFF and REG1.
b. M (Master) keySwitches between OFF, REG1, REG2, X1 and RF.
c. OW (Owner) keySwitches between OFF, REG1, REG2, X1, Z1, X2/Z2 and RF.
d. PGM (Program) keySwitches to any position.
Mode key (for other area)The following three types of mode keys are providedwith the unit in areas outside of the United Kingdom,the United States and Canada.
a. OP (Operator) keySwitches between OFF and REG1.
b. M (Master) keySwitches between OFF, REG1, REG2, X1 and RF.
c. OW (Owner) keySwitches to any position.
16
Introducing TK-7000/7500
Clerk key/button/lockOn models available in the United States and Canada,clerk or cashier assignment can be performed usingclerk secret numbers only (clerk buttons are notequipped).In Germany, you can assign clerks by using clerk keyor by clerk secret number (clerk key is equipped).In other areas, you can assign clerks by using clerkbutton or by clerk secret number.The method you are assigning clerk depends on theprogramming of your cash register.
Mode switchUse the mode keys to change the position of the modeswitch and select the mode you want to use.
REG2 X1
REG1 Z1
OFF X2/Z2
RF
PGM
edoMhctiws
emanedoM noitpircseD
FFO yb-dnatSdnadetresniebnacsyeklortnocedomehtfoynA
.noitisopsihtnihctiwsedomehtmorfdevomer
1GER 1retsigeRedomehtfoynA.snoitcasnartselaslamronrofdesU
edomehtmorfdevomerdnadetresniebnacsyeklortnoc.noitisopsihtnihctiws
2GER 2retsigeR
2GERotgnihctiwsecniS.snoitarepolaicepsrofdesUtiderc,stnuocsidsasnoitcnufhcus,yeklaicepsaseriuqerebnacstuodiapdna,stnemyapkcehc,selasegrahc,selas
1GERnidetibihorpsamehtgnimmargorpybdellortnoc.2GERnidewolladna
FRdnufeR
sunimgeR
.sdnufergnissecorprofdesU,noitisopFRnisiretsigerehtfohctiwsedomehtnehW
retsigerehtroedomdnuferehtrehtiesseccanacuoy.edomsunim
1XselasyliaD
daer)gniraelc(gnittesertuohtiwstroperyliadniatbootdesU
.atadlatotlla
1ZselasyliaD
teserlla)gniraelc(gnitteserelihwstroperyliadniatbootdesU
.atadlatot
2Z/2XelascidoireP
teser/daergnittesertuohtiwstroperselascidoirepniatbootdesU
.atadlatotllagnitteserelihwroatadlatot
MGP margorPhcusatadteserpdnasnoitcnufgnimmargorpnehwdesU
gnidaernehwdesuoslA.setarxatdnasecirptinusa.atadmargorp
17
Intro
duci
ng T
K-7
000/
7500
TK-7000/7500 User’s Manual
When the cash drawer does not open! (for medium size drawer only)In case of power failure or the machine is in malfunction, the cash drawer does not openautomatically. Even in these cases, you can open the cash drawer by pulling drawer releaselever (see below).
Important!The drawer will not open, if it is locked with a drawer lock key.
CLK1 CLK2 CLK3 CLK4 CLK5 CLK6CLK#
Clerk lock Clerk key
1111
DrawerThe drawer opens automatically whenever you finalizea registration and whenever you issue a read or resetreport.
Drawer lock (for medium size drawer)Use the drawer key to lock and unlock the drawer.
Drawer open key (for large size drawer)Use the drawer open key to open the drawer.
Clerk secret number keyWhen the cash register is programmed to use clerksecret numbers for clerk or cashier assignment, theclerk buttons are not functional.
Clerk lock/keyYou can assign the clerk or cashier inserting a clerk keyinto the clerk lock .
Clerk buttonYou can assign the clerk or cashier using the six but-tons located below the display panel.
18
Introducing TK-7000/7500
5&78TOTAL CHANGE
2ND@ 3RD@
"541 2 3 4
TAX
TOTAL CHANGE
AMOUNTRPT
4 ST $23.55 Langue-de-chat
2ND@RCT 3RD@
$711 2 3 4
TAX
TOTAL CHANGE
AMOUNTRPT
3 ST $45.63 Langue-de-chat
2ND@RCT 3RD@
"70T/S1 T/S2 T/S3 F/S TOTAL CHANGE
AMOUNTRPT
4 ST $27.83 Langue-de-chat
Display
Display panelMain display for the U.S.
Main display for Canada and Germany
Main display for other area
Customer display for all area
19
Intro
duci
ng T
K-7
000/
7500
TK-7000/7500 User’s Manual
1Amount/QuantityThis part of the display shows monetary amounts. Italso can be used to show the current time.
2 Item descriptorWhen you register a department/PLU/scanningPLU, the item descriptor appears here.
3 Item counterNumber of item sold is displayed.
4Subtotal amountCurrent subtotal amount (add-on tax excluded) isdisplayed.
5Number of repeatsAnytime you perform a repeat registration (pages32, 37), the number of repeats appears here.Note that only one digit is displayed for the numberof repeats. This means that a “5” could mean 5, 15or even 25 repeats.
6 2nd, 3rd menu indicatorWhen you press B to designate the 2nd/3rd unitprice, the corresponding number is displayed.
7Taxable sales status indicatorsWhen you register a taxable item, the correspondingindicator is lit.
8Amount tendered key descriptor/amount
9Change descriptor/amount
0Total/Change indicatorsWhen the TOTAL indicator is lit, the displayedvalue is monetary total or subtotal amount. Whenthe CHANGE indicator is lit, the displayed value isthe change due.
ARCT indicatorWhen the register issues receipts, this indicator is lit.
2ND@RCT 3RD@
"70T/S1 T/S2 T/S3 F/S TOTAL CHANGE
AMOUNTRPT
4 ST $27.83 Langue-de-chat
12
3 4
2ND@ 3RD@
3 "541 2 3 4
TAX
TOTAL CHANGE
AMOUNTRPT
6 ST $43.75 Langue-de-chat
5 6 7
2ND@RCT 3RD@
$711 2 3 4
TAX
TOTAL CHANGE
AMOUNTRPT
CASH $50.00 CHANGE
09A
8 9
RECEIPTON/OFF
Display example
Item registration
Repeat registration
Totalize operation
PRICESHIFT
20
Introducing TK-7000/7500
Keyboard (TK-7000)
C
7 8 9
4 5 6
1 2 3
0 00 •
RECEIPT JOURNALFEED FEED
9 18 27 36 45 54 63 72 81 90 99 108
8 17 26 35 44 53 62 71 80 89 98 107
7 16 25 34 43 52 61 70 79 88 97 106
6 15 24 33 42 51 60 69 78 87 96 105
5 14 23 32 41 50 59 68 77 86 95 104
4 13 22 31 40 49 58 67 76 85 94 103
3 12 21 30 39 48 57 66 75 84 93 102
2 11 20 29 38 47 56 65 74 83 92 101
1 10 19 28 37 46 55 64 73 82 91 100
CLK# RC PD
RECEIPTON/OFF T/S1 T/S2
%– –
RF VALID #NS
CH
CR1 CR2
SUBTOTAL
CHK/TEND
CA AMTTEND
X/FORDATETIME
RECEIPT
ERR.CORR
CANCEL
4 8
3 7
2 6
1 5
2
1
3
5
6
7
8
0 A
K
N
L
ED
O
QP
R
S
T
GF
JH
• Register Mode1 Paper feed key f, j
Hold this key down to feed paper from the printer.
2 Post receipt key ;Use this key to produce a post-finalization receipt.
3 Receipt on/off key QUse this key twice to change the status “receipt issue” or“no receipt.” In case of “receipt issue”, the indicator islit.
4 Open key OUse this key to temporarily release a limitation on thenumber of digits that can be input for a unit price.
5 Refund key RUse this key to input refund amounts and void certainentries.
6 Clear key CUse this key to clear an entry that has not yet beenregistered.
7 Ten key pad 0, 1 ~ 9, -, ̂Use these keys to input numbers.
8 Clerk number key oUse this key to sign clerk on and off the register.
9 VAT key VUse this key to print a VAT breakdown.
0 Discount key pUse this key to register discounts.
A Minus key mUse this key to input values for subtraction.
B Loan key lThis key is used to input the amount of money providedfor making change. This operation affects media totals,rather than sales totals. Loans are made for all types ofmoney which can be specified by the finalize key.
C Pick up key LWhen the amount in drawer exceeds the limit value(sentinel function), the manager performs a pick upoperation. This key is used for this function. Thisoperation affects media totals, rather than sales totals.Pick ups are made for all types of money which can bespecified by the finalize key.
D Tax status shift 1 key tUse this key to change the Taxable 1 status of the nextitem.
E Tax status shift 2 key TUse this key to change the Taxable 2 status of the nextitem.
F Validation key vUse this key to validate transaction amounts on slip.
G Non-add/No sale key NNon-add key: To print reference number (to identify apersonal check, credit card, etc.) during a transaction, usethis key after some numerical entries.No sale key: Use this key to open the drawer withoutregistering anything.
for U.S.
21
Intro
duci
ng T
K-7
000/
7500
TK-7000/7500 User’s Manual
C
7 8 9
4 5 6
1 2 3
0 00 •
RECEIPT JOURNALFEED FEED VAT RC
OPEN %– –
RF VALID #NS
CH
CR1 CR2
SUBTOTAL
CHK/TEND
CA AMTTEND
XDATETIME
4 8
3 7
2 6
1 5
RECEIPT LOAN PICKUP
ERR.CORR
CANCEL
PDEURO
2
1
4
5
6
7
9
B C
K
N
M
A0
O
QP
R
S
T
GF
JIC
7 8 9
4 5 6
1 2 3
0 00 •
RECEIPT JOURNALFEED FEED VAT RC
RECEIPTON/OFF %– –
RF VALID #NS
CH
CR1 CR2
SUBTOTAL
CHK/TEND
CA AMTTEND
XDATETIME
4 8
3 7
2 6
1 5
RECEIPT LOAN PICKUP
ERR.CORR
CANCEL
PDEURO
2
1
3
5
6
7
9
B C
K
N
M
A0
O
QP
R
S
T
GF
JI
for German for other area
H Multiplication/For/Date/Time key xUse this key to input a quantity for a multiplicationoperation and registration of split sales of packageditems. Between transactions, this key displays the currenttime and date.
I Multiplication/Date/Time key XUse this key to input a quantity for a multiplicationoperation. Between transactions, this key displays thecurrent time and date.
J Error correction/Cancellation key eUse this key to correct registration errors and to cancelregistration of entire transactions.
K Received on account key rUse this key following a numeric entry to register moneyreceived for non-sale transactions.
L Paid out key PUse this key following a numeric entry to register moneypaid out from the drawer.
M Euro/Paid out key qEuro key: Use this key to convert the main currency tothe sub currency (the euro/the local money), whenregistering a subtotal amount. This key is also used forspecifying sub currency while entering an amount ofpayment or declaration in drawers.Paid out key: Use this key following a numeric entry toregister money paid out from the drawer.
N Department keys !, ", # ~ %Use these keys to register items to departments.
O Credit key c, dUse this key to register a credit sale.
P Charge key hUse this key to register a charge sale.
Q Check key kUse this key to register a check tender.
R Subtotal key sUse this key to display and print the current subtotal(includes add-on tax) amount.
S Cash/Amount tendered key aUse this key to register a cash tender.
T Flat PLU key (, ) ~ /Use these keys to register items to flat PLUs.
22
Introducing TK-7000/7500
RECEIPT JOURNALFEED FEED
7 8 9
4 5 6
1 2 3
0 00 •
SUBTOTAL
CA
CH
CR1
4 8
3 7
2 6
1 5
CR2
CHK/TEND
AMTTEND
25 34 43 52 61 70 79 88 97 106
8 16 24 33 42 51 60 69 78 87 96 105
7 15 23 32 41 50 59 68 77 86 95 104
6 14 22 31 40 49 58 67 76 85 94 103
5 13 21 30 39 48 57 66 75 84 93 102
4 12 20 29 38 47 56 65 74 83 92 101
3 11 19 28 37 46 55 64 73 82 91 100
2 10 18 27 36 45 54 63 72 81 90 99
1 9 17 26 35 44 53 62 71 80 89 98
RC
RF
#NS
T/S2T/S1
%– —
CLK#
LOAN PICKUP
VALIDRECEIPT
RECEIPTON/OFF
ERR.CORR
CANCELX/FOR
DATETIME
PD
C
1 2 3 4 5
6 7 8
9 0 A
B C D
G H J
K
L
O
M
R
S
T
Q
P
for the U.S./Canada
Keyboard (TK-7500)
• Register Mode1 Paper feed key f, j
Hold this key down to feed paper from the printer.
2 Flat PLU key (, ) ~ .Use these keys to register items to flat PLUs.
3 Post receipt key ;Press this key to produce a post-finalization receipt.
4 Validation key vUse this key to validate transaction amounts on slip.
5 Clerk number key oUse this key to sign clerk on and off the register.
6 Receipt on/off key QUse this key twice to change the status “receipt issue” or“no receipt.” In case of “receipt issue”, the indicator islit.
7 Loan key lThis key is used to input the amount of money providedfor making change. This operation affects media totals,rather than sales totals. Loans are made for all types ofmoney which can be specified by the finalize key.
8 Pick up key LWhen the amount in drawer exceeds the limit value(sentinel function), the manager performs a pick upoperation. This key is used for this function. Thisoperation affects media totals, rather than sales totals.Pick ups are made for all types of money which can bespecified by the finalize key.
9 Discount key pUse this key to register discounts.
0 Minus key mUse this key to input values for subtraction.
A Refund key RUse this key to input refund amounts and void certainentries.
B Error correction/Cancellation key eUse this key to correct registration errors and to cancelregistration of entire transactions.
C Tax status shift 1 key tUse this key to change the Taxable 1 status of the nextitem.
D Tax status shift 2 key TUse this key to change the Taxable 2 status of the nextitem.
E Open key OUse this key to temporarily release a limitation on thenumber of digits that can be input for a unit price.
F VAT key VUse this key to print a VAT breakdown.
G Clear key CUse this key to clear an entry that has not yet beenregistered.
H Multiplication/For/Date/Time key xUse this key to input a quantity for a multiplicationoperation and registration of split sales of packageditems. Between transactions, this key displays the currenttime and date.
23
Intro
duci
ng T
K-7
000/
7500
TK-7000/7500 User’s Manual
RECEIPT JOURNALFEED FEED
7 8 9
4 5 6
1 2 3
0 00 •
SUBTOTAL
CA
CH
CR1
4 8
3 7
2 6
1 5
CR2
CHK/TEND
AMTTEND
25 34 43 52 61 70 79 88 97 106
8 16 24 33 42 51 60 69 78 87 96 105
7 15 23 32 41 50 59 68 77 86 95 104
6 14 22 31 40 49 58 67 76 85 94 103
5 13 21 30 39 48 57 66 75 84 93 102
4 12 20 29 38 47 56 65 74 83 92 101
3 11 19 28 37 46 55 64 73 82 91 100
2 10 18 27 36 45 54 63 72 81 90 99
1 9 17 26 35 44 53 62 71 80 89 98
RC
RF
VATOPEN
%– —
CLK#
LOAN PICKUP
VALIDRECEIPT
RECEIPTON/OFF
ERR.CORR
CANCELX
DATETIME
PDEURO
C #NS
1 2 3 4 5
6 7 8
9 0 A
B E F
G I J
K
L
O
N
Q
S
T
R
P
for U.K.
I Multiplication/Date/Time key XUse this key to input a quantity for a multiplicationoperation. Between transactions, this key displays thecurrent time and date.
J Non-add/No sale key NNon-add key: To print reference number (to identify apersonal check, credit card, etc.) during a transaction, usethis key after some numerical entries.No sale key: Use this key to open the drawer withoutregistering anything.
K Ten key pad 0, 1 ~ 9, -, ̂Use these keys to input numbers.
L Received on account key rUse this key following a numeric entry to register moneyreceived for non-sale transactions.
M Paid out key PUse this key following a numeric entry to register moneypaid out from the drawer.
N Euro/Paid out key qEuro key: Use this key to convert the main currency tothe sub currency (the euro/the local money), whenregistering a subtotal amount. This key is also used forspecifying sub currency while entering an amount ofpayment or declaration in drawers.Paid out key: Use this key following a numeric entry toregister money paid out from the drawer.
O Department keys !, ", # ~ %Use these keys to register items to departments.
P Credit key c, dUse this key to register a credit sale.
Q Charge key hUse this key to register a charge sale.
R Check key kUse this key to register a check tender.
S Subtotal key sUse this key to display and print the current subtotal(includes add-on tax) amount.
T Cash/Amount tendered key aUse this key to register a cash tender.
24
Introducing TK-7000/7500
Allocatable functionsYou can tailor a keyboard to suit your particular type ofbusiness.
Add checkUse this key in a check tracking system to combine the detailsof more than one check into a single check.
ArrangementUse this key to activate an arrangement program programmedin the arrangement file. Any operation that can be performedfrom the keyboard, as well as mode, can be programmed in anarrangement program, and can be performed merely bypressing this key. In addition, one numeric entry can beincluded in an arrangement program. In this case, input thenumber and press this key.The mode control function of this key can be programmed forall modes except for the OFF and PGM mode.
Bill copyUse this key to issue bill copy.
Bottle returnUse this key to specify next item as bottle return.
CancelInvalidates all preceding data registered for departments, PLUsand set menus within a transaction. This key must be pressedbefore the transaction involving the data to be invalidated isfinalized. It is also effective even after calculation of subtotalamount.
Check endorsementUse this key to print a preset check endorsement message usingthe slip printer.
Check printUse this key to print the check on the slip printer.
Clerk transferUse this key to transfer opened checks to another clerk.
CouponUse this key for registering coupons.
Coupon 2Use this key to declare the next item registration as coupon.
CubeThis key provides the same functions as the Square key. Inaddition, this key also has a cube multiplication function.
Currency exchangeUse this key to convert foreign currency to local currency orvice versa using the exchange rate preset for the key anddisplays the result.Use this key for conversions of a home currency subtotal ormerchandise subtotal to equivalent of another country'scurrency.Use this key for conversions of another country's currency tothe equivalent of the home currency.
Customer numberUse this key to register the number of customers.
DeclarationUse this key to declare in drawer amount for money declara-tion.
DepositUse this key to register deposits.
Eat-inUse this key to specify if the customer eats in the restaurant.Before closing a transaction press this key.
EBT (electronic benefit transfer)Use this key to register an EBT amount with a tender amountinput.
Food stamp shiftUse this key to change food stamp status.
Food stamp subtotalUse this key to obtain the food stamp applicable amount.
Food stamp tenderUse this key to register a food stamp payment amount with atender amount input.
Ketten BonUse this key to enter quantities for multiplication. Multiplica-tion by this key issues singular order prints.
Manual taxUse this key to register a tax amount.
Menu shiftUse this key to shift key to the 1st ~ 6th menu.
Merchandise subtotalUse this key to obtain subtotal excluding the add-on taxamount and the previous balance.
New balanceUse this key for adding the latest registered total amount to theprevious balance to obtain a new balance.
New checkUse this key in a check tracking system to input a new checknumber in order to open a new check under that number.
New/Old checkUse this key in a check tracking system to input check numbersin order to open new checks and to reopen existing checks.When the clerk inputs a check number, the register checks tosee if that number already exists in the check tracking memory.If there is no matching number in the memory, a new check isopened under the input number. If the check number inputmatches a number already stored in the memory, that check isreopened for further registration or finalization.
No saleUse this key to open the drawer between transaction.
Non addUse this key to print reference numbers (personal checknumber, card number, etc.)
Normal receiptUse this key to change the order status from Bon to normal.
OBR (Optical barcode reader)Use this key to input optical barcodes manually.
Old checkUse this key in a check tracking system to input the number ofan existing check (previously created by the New check key)whose details are stored in the check tracking memory.Existing checks are reopened to perform further registration orto finalize them.
One touch NLUUse this key to register scanning PLU directly from thekeyboard. There is one One touch NLU key for one scanningPLU, and multiple one touch NLU keys can be set on thekeyboard.
25
Intro
duci
ng T
K-7
000/
7500
TK-7000/7500 User’s Manual
Open 2Use this key to suspend the compulsory specifications.
Open checkUse this key to issue an open check report of an assigned clerk.
Operator numberUse this key to enter a clerk number during clerk transfer.
Operator X/ZUse this key to issue a clerk’s individual X/Z report.
PlusUse this key for registering surcharge.
PremiumUse this key to apply a preset % or manual input % to obtainthe premium amount for the last registered item or subtotal.
Previous balanceUse this key to register the previous negative/positive balanceat the beginning of or during a transaction.
Previous balance subtotalUse this key to obtain subtotal excluding the add-on taxamount and current balance.
PriceUse this key to register an open PLU.
Price changeUse this key to change scanning PLU unit price temporarily.
Price inquiryUse this key to confirm the price and descriptors of PLUwithout registering.
Price shiftUse this key to shift a PLU item/flat-PLU key to the 1st ~ 2ndunit price, a scanning PLU to the 1st ~ 3rd unit price.
Rate taxUse this key to activate the preset tax rate or manually inputrate to obtain the tax for the preceding taxable status 1 amount.
RecallUse this key for recalling the transferred check number by thestore key. When this key is pressed, the check number willappear in order of the oldest record.
Red priceUse this key to register a new (discounted) price of an item.
ReviewUse this key to examine the current transaction by displayingitem descriptor and registered amount. This key is also used forvoid operation or separate check operation.
ScaleUse this key to read the weight of the item and shows it on thedisplay. This key is also used to input the weight manually.
Separate checkUse this key in a check tracking system to separate selecteditems from one check to another check.
Slip feed/releaseUse this key to feed slips inserted into the slip printer. This isdone by specifying the number of feed lines. This key is alsoused to release the slip paper holder if numbers are not entered.
Slip back feed/releaseUse this key to back feed slips inserted into the slip printer.This is done by specifying the number of feed lines. This key isalso used to release the slip paper holder if numbers are notentered.
Slip printUse this key to execute a slip batch printing on the slip printer.Pressing this key prints the sales details. Actual printing isperformed following receipt issuance.
SquareThis key provides the same functions as the Multiplication key.In addition, this key also has a square multiplication function.
Stock inquiryUse this key to check the current stock quantity for a PLUwithout registering.
StoreUse this key for storing the check number of the registereditems. When this key is pressed, registered item data will bestored, and then these data will transfer to the youngest checknumber.
Table numberUse this key to input table numbers.
Table transferUse this key to transfer the contents of a check to anothercheck.
TakeoutUse this key to specify if the customer takes out items. Beforetotal a transaction. Press this key for the tax exemption.
TareUse this key to input tare weight.
Tax exemptUse this key to change taxable amounts to nontaxable amounts.
Taxable amount subtotalUse this key to obtain taxable amount subtotal.
Text printUse this key to enter characters to print.
Text recallUse this key to print preset characters.
TipUse this key to register tips.
Tray totalUse this key to display the total amount for all registrationsfrom the last registration until this key is pressed or registra-tions between presses of this key.
Unit weightUse this key to input the unit weight of a scalable item.
VoidUse this key to invalidate preceding item data registered.
26
Introducing TK-7000/7500
1
2
4
3
How to remove/replace the sheet holder (TK-7000 only)
Remove the sheet holderFollow steps 1 ~ 2.
Replace the sheet holderFollow steps 3 ~ 4.
27
Intro
duci
ng T
K-7
000/
7500
TK-7000/7500 User’s Manual
1
1 UP
UP
UP
UP
Back side
UP
UP
Back side
98
76
54
32
1
18
17
16
15
14
13
12
11
10
27
26
25
24
23
22
21
20
19
36
35
34
33
32
31
30
29
28
45
44
43
42
41
40
39
38
37
54
53
52
51
50
49
48
47
46
63
62
61
60
59
58
57
56
55
72
71
70
69
68
67
66
65
64
81
80
79
78
77
76
75
74
73
9089
8887
8685
8483
82
9998
9796
9594
9392
91
108
107
106
105
104
103
102
101
100
1
9
8
7
6
5
4
3
2
1
18
17
16
15
14
13
12
11
10
27
26
25
24
23
22
21
20
19
36
35
34
33
32
31
30
29
28
45
44
43
42
41
40
39
38
37
54
53
52
51
50
49
48
47
46
63
62
61
60
59
58
57
56
55
72
71
70
69
68
67
66
65
64
81
80
79
78
77
76
75
74
73
90
89
88
87
86
85
84
83
82
99
98
97
96
95
94
93
92
91
108
107
106
105
104
103
102
101
100
1
1
3
2
4
5
6
How to install a menu sheet in the sheet holder (TK-7000 only)
Open the sheet holderFollow the steps 1 ~ 3.
Set a menu sheet in the sheet holderFollow the steps 4 ~ 6.
28
REG 03-04-2000 11:58
C01 MC#01 000123
1 DEPT01 T1 •1.00
1 DEPT02 T1 •2.00
5 DEPT03 •5.00
7 No
TA1 •3.00
TX1 •0.15
TL •8.15
CASH •10.00
CG •1.85
REG 03-04-2000 11:59
C02 MC#01 000124
1 DEPT01 T1 •1.00
1 DEPT03 T1 •3.00
1 DEPT02 T1 •2.00
1 DEPT04 T1 •4.00
5 DEPT05 •5.00
9 No
TA1 •10.00
TX1 •0.50
TL •15.50
CASH •20.00
CG •4.50
REG 03-04-2000 11:57
C01 MC#01 000123
7 No
TA1 •3.00
TX1 •0.15
TL •8.15
CASH •10.00
CG •1.85
REG 03-04-2000 11:57
C02 MC#01 000124
9 No
TA1 •10.00
TX1 •0.50
TL •15.50
CASH •20.00
CG •4.50
REG 03-04-2000 11:58
C01 MC#01 000125
7 No
TA1 •3.00
TX1 •0.15
TL •9.35
CASH •10.00
CG •0.65
REG 03-04-2000 11:59
How to read the printouts• The journal and receipts are records of all transactions and operations.• The contents printed on receipts and journal are almost identical.• You can choose the journal skip function.
If the journal skip function is selected, the cash register will print the total amount of each transaction, and thedetails of premium, discount and reduction operations only, without printing department and PLU item registra-tions on the journal.
• The following items can be skipped on receipts and journal.• Consecutive number• Taxable status• Taxable amount• Item counter
************************
* THANK YOU *
** CALL AGAIN **
************************
* COMMERCIAL MESSAGE *
* COMMERCIAL MESSAGE *
* COMMERCIAL MESSAGE *
* COMMERCIAL MESSAGE *
REG 03-04-2000 11:58
C01 MC#01 000123
1 DEPT01 T1 •1.00
1 DEPT02 T1 •2.00
5 DEPT03 •5.00
7 No
TA1 •3.00
TX1 •0.15
TL •8.15
CASH •10.00
CG •1.85
*** BOTTOM MESSAGE ***
*** BOTTOM MESSAGE ***
*** BOTTOM MESSAGE ***
*** BOTTOM MESSAGE ***
Receipt Sample Journal Sample Journal Sample(Item lines Included) (Item lines Skipped)
— Logo message
— Commercial message
— Mode/Date/Time
— Clerk/Machine No.Consecutive No.
— Q’ty/Item
— Item counter
— Bottom message
In the operation examples contained in this manual, the print samples are what would be produced if the rollpaper is being used for receipts. They are not actual size. Actual receipts are 45 mm wide. Also, all sample receiptsand journals are printout images.
Basic Operations and Setups
29
Bas
ic O
pera
tions
and
Set
ups
TK-7000/7500 User’s Manual
• Check to make sure that the cash register isplugged in securely. Page 9
• Check to make sure there is enough paperleft on the roll. Pages 10, 11
• Read the financial totals to confirm that they areall zero. Page 103
• Check the date and time. Page 31
• Register transactions. Page 32
• Periodically read totals. Page 102
• Reset the daily totals. Page 53
• Remove the journal. Page 119
• Empty the cash drawer and leave it open. Page 17
• Take the cash and journal to the office.
How to use your cash registerThe following describes the general procedure you should use in order to get the most out of your cash register.
BEFORE business hours…
DURING business hours…
AFTER business hours…
30
Basic Operations and Setups
Assigning a clerk
On models available in the United States and Canada, clerk or cashier assignment canbe performed using clerk secret numbers only (clerk buttons are not equipped).In Germany, you can assign clerks by using clerk key or by clerk secret number(clerk key is equipped).In other areas, you can assign clerks by using clerk button or by clerk secret number.The method you of assigning clerk depends on the programming of your cash register.
Clerk buttonYou can assign the clerk or cashier using the six buttons located below the display panel.
Clerk lock/clerk keyYou can assign the clerk or cashier inserting a clerk key into the clerk lock .
Clerk secret number keyWhen the cash register is programmed to use clerk secret numbers for clerk or cashier assignment, the clerkbuttons are not functional.
Clerk sign onOPERATION RECEIPT
Signing clerk 1 on: 1 6 oSigning clerk 2 on: 2 6 o
○
○
○
Signing clerk 15 on:15 6 o
• If you do not want the clerk secret number to be shown on the display, press o before entering the number.
Clerk sign offOPERATION
Signing clerk off: 0 6 o(except PGM mode)
• The current clerk is also signed off whenever you set the mode switch to OFF position.
Important!• The error code “E008” appears on the display whenever you try to perform a registration, a read/
reset operation without signing on.
• A clerk cannot sign on unless other clerk is signed off.
• The signed on clerk is also identified on the receipt/journal.
— Clerk name/machine No./consecutive No.
* COMMERCIAL MESSAGE *
REG 03-04-2000 11:58
C01 MC#01 000123
1 DEPT01 T1 •1.00Clerk secret number(1 ~ 15 is set as default.)
Mode switch
ALL
31
Bas
ic O
pera
tions
and
Set
ups
TK-7000/7500 User’s Manual
Displaying the time and dateYou can show the time or date on the display of the cash register whenever there isno registration being made.
To display and clear the date/timeOPERATION DISPLAY
03-04-2000 (MON)
x or X 08-3~
REGC01
C ~00
Preparing coins for changeYou can use the following procedure to open the drawer without registering an item.This operation must be performed out of a sale.(You can use the r key instead of the N key. See page 52.)
Opening the drawer without a saleOPERATION RECEIPT
NREG 03-04-2000 09:00
C01 MC#01 000001
#/NS •••••••••
Mode switch
REG
Date/time appears on the display.
Clears the date/time display.
Mode switch
REG
32
Basic Operations and Setups
— Repeat
— Repeat
Unit price
Department
Preparing and using department/flat-PLU keysRegistering department/flat-PLU keys
The following examples show how you can use the department/flat-PLU keys invarious types of registrations.
Single item sale
Example 1OPERATION RECEIPT
1-
!
F
Example 2 (Subtotal registration and change computation)OPERATION RECEIPT
1234
(
sssss20-FFFFF
RepeatOPERATION RECEIPT
150!!!!!!!!!!!s
10-F
REG 03-04-2000 09:10
C01 MC#01 000003
1 PLU001 •12.34
TL •12.34
CASH •20.00
CG •7.66
— Total amount
— Amount tendered
— Change
REG 03-04-2000 09:05
C01 MC#01 000002
1 DEPT01 •1.00
TL •1.00
CASH •1.00
— Date/time
— Mode/consecutive No.
— Department No./unit price
— Total amount
Mode switch
REG
Unit price $12.34——————————
Item Quantity 1——————————Flat-PLU 1
—————————————Payment Cash $20.00
Unit price
Flat-PLU
Amount tendered
REG 03-04-2000 09:15
C01 MC#01 000004
1 DEPT01 •1.50
1 DEPT01 •1.50
1 DEPT01 •1.50
TL •4.50
CASH •10.00
CG •5.50
Unit price $1.00——————————
Item Quantity 1——————————
Dept. 1—————————————Payment Cash $1.00
Unit price $1.50——————————
Item Quantity 3——————————
Dept. 1—————————————Payment Cash $10.00
33
Bas
ic O
pera
tions
and
Set
ups
TK-7000/7500 User’s Manual
Quantity(4-digit integer/2-digit decimal)
Quantity being purchased(4-digit integer/2-digit decimal)
Package quantity(4-digit integer/2-digit decimal)
Package price
MultiplicationOPERATION RECEIPT
12XXXXX
1-(s
20-F
• The model for the U.S./Canada, use x instead of X.
Split sales of packaged itemsOPERATION RECEIPT
3xxxxx
4xxxxx
10-!s
10-F
• If x is not allocated on the keyboard, key allocation is necessary.
Programming department/flat-PLU keys
To program a unit price for each department/flat-PLU
6 1s 6 : : : : : : 6
6 s
Unit price
Different setting
Same setting
Mode switch
PGMDepartment
Flat-PLU
To program the tax calculation status for each department/flat-PLU
Tax calculation statusThis specification defines which tax table should be used for automatic tax calculation.
Unit price $1.00——————————
Item Quantity 12——————————Flat-PLU 1
—————————————Payment Cash $20.00
REG 03-04-2000 09:20
C01 MC#01 000005
12 PLU0001 •12.00
12 @1/ 1.00
PLU0001 •12.00
TL •12.00
CASH •20.00
CG •8.00
— Quantity/result
or
— Quantity/unit q’ty/@
— Result
REG 03-04-2000 09:25
C01 MC#01 000006
3 DEPT01 •7.50
3 @4/ 10.00
DEPT01 •7.50
TL •7.50
CASH •10.00
CG •2.50
— Quantity/result
or
— Quantity/unit q’ty/@
— Result
Unit price 4 for $10.00——————————Quantity 3
Item ——————————Dept. 1
——————————Taxable No
—————————————Payment Cash $10.00
34
Basic Operations and Setups
6 3s 60366s 6 : : 6
6 s
To another department/flat-PLU
Same program
D2 D1Mode switch
PGM Department
Flat-PLU
eropagniS/.S.Uehtrof
)”0“syawla,eropagniSrof(pmatsdooF 1=seY0=oN
:D
2
sutats1elbaxaT a 1=seY0=oN
:)c+b+a(
D1
sutats2elbaxaT b 2=seY0=oN
sutats3elbaxaT c 4=seY0=oN
adanaCrof
sutatsstunoD 1=seY0=oN
:D
2
0=xatnoN1=1elbaxaT2=2elbaxaT
3=3elbaxaT4=4elbaxaT
5=2&1elbaxaT
6=3&1elbaxaT7=4&1elbaxaT tnacifingiS
rebmun:D
1
aerarehtorof
0=xatnoN1=1elbaxaT2=2elbaxaT3=3elbaxaT
4=4elbaxaT5=5elbaxaT6=6elbaxaT7=7elbaxaT
8=8elbaxaT9=9elbaxaT
01=01elbaxaTtnacifingiS
srebmun::
D2
D1
Programming procedure
noitpircseD eciohC edocmargorP
.yllaunamecirptinugniretneroftimiltnuomahgiH tnacifingiSsrebmun
:: ~ ::D
6D
5~ D
2D
1
To program high amount limit for each department/flat-PLU
Programming procedure
6 3s 61566s 6 : ~ : 6
6 s
To another department/flat-PLU
Same program
D6 ~ D1Mode switch
PGM Department
Flat-PLU
35
Bas
ic O
pera
tions
and
Set
ups
TK-7000/7500 User’s Manual
Registering department/flat-PLU keys by programming data
Preset priceOPERATION RECEIPT
"""""F
Preset tax statusOPERATION RECEIPT
5X#####$$$$$s
20-F
• The model for the U.S./Canada, use x instead of X.
Locking out high amount limitationOPERATION RECEIPT
1050#####
C105#
s2-F
REG 03-04-2000 09:35
C01 MC#01 000008
5 DEPT03 T1 •10.00
1 DEPT04 T2 •2.00
TA1 •10.00
TX1 •0.40
TA2 •2.00
TX2 •0.20
TL •12.60
CASH •20.00
CG •7.40
Unit price ($2.00)preset
—————————Quantity 5
Item 1 —————————Dept. 3
—————————Taxable (1)preset
—————————————Unit price ($2.00)
preset—————————Quantity 1
Item 2 —————————Dept. 4
—————————Taxable (2)preset
—————————————Payment Cash $20.00
REG 03-04-2000 09:30
C01 MC#01 000007
1 DEPT02 •1.00
TL •1.00
CASH •1.00
Unit price ($1.00)preset—————————
Item Quantity 1—————————
Dept. 2—————————————Payment Cash $1.00
— Department No./unit price
Tax status
— Taxable Amount 1
— Tax 1
— Taxable Amount 2
— Tax 2
Mode switch
REG
Unit price $1.05—————————Quantity 1
Item —————————Dept. 3
—————————Max.amount($10.00)preset
—————————————Payment Cash $2.00
REG 03-04-2000 09:40
C01 MC#01 000009
1 DEPT03 •1.05
TL •1.05
CASH •2.00
CG •0.95
ERROR ALARM(Exceeding high amount)
36
Basic Operations and Setups
Preparing and using PLUsThis section describes how to prepare and use PLUs.
CAUTION:Before you use PLUs, you must first program the unit price and tax status.
Programming PLUs
To program a unit price for each PLU
6 3s 6 0366s 6 PLU No.+ 6 : : 6 a 6 s
To new (not sequencial) PLU
D2 D1
Different programto the next PLU
Same program
Mode switch
PGM
To program tax calculation status for each PLU
eropagniS/.S.Uehtrof
)”0“syawla,eropagniSrof(pmatsdooF 1=seY0=oN
:D
2
sutats1elbaxaT a 1=seY0=oN
:)c+b+a(
D1
sutats2elbaxaT b 2=seY0=oN
sutats3elbaxaT c 4=seY0=oN
adanaCrof
sutatsstunoD 1=seY0=oN
:D
2
0=xatnoN1=1elbaxaT2=2elbaxaT
3=3elbaxaT4=4elbaxaT
5=2&1elbaxaT
6=3&1elbaxaT7=4&1elbaxaT tnacifingiS
rebmun:D
1
aerarehtorof
0=xatnoN1=1elbaxaT2=2elbaxaT3=3elbaxaT
4=4elbaxaT5=5elbaxaT6=6elbaxaT7=7elbaxaT
8=8elbaxaT9=9elbaxaT
01=01elbaxaTtnacifingiS
srebmun::
D2
D1
6 1s 6 PLU No.+ 6 : : : : : : 6 a 6 s
Unit priceMode switch
PGM
To new (not sequencial) PLU
Different program to the next PLU
Same program
37
Bas
ic O
pera
tions
and
Set
ups
TK-7000/7500 User’s Manual
PLU code
Quantity(4-digit integer/2-digit decimal)
Mode switch
REG
Registering PLUsThe following examples show how you can use PLUs in various types ofregistrations.
PLU single item saleOPERATION RECEIPT
14
+++++s
3-F
PLU repeatOPERATION RECEIPT
14+++++++++++s
10-F
PLU multiplicationOPERATION RECEIPT
10XXXXX
7+s
20-F
• The model for the U.S./Canada, use x instead of X.
— PLU No./unit price
REG 03-04-2000 09:45
C01 MC#01 000010
1 PLU0014 •2.50
TL •2.50
CASH •3.00
CG •0.50
REG 03-04-2000 09:50
C01 MC#01 000011
1 PLU0014 •2.50
1 PLU0014 •2.50
1 PLU0014 •2.50
TL •7.50
CASH •10.00
CG •2.50
REG 03-04-2000 09:55
C01 MC#01 000012
10 PLU0007 •20.00
10 @1/ 2.00
PLU0007 •20.00
TL •20.00
CASH •20.00
CG •0.00
Unit price ($2.50)preset
—————————Item Quantity 1
—————————PLU 14
—————————————Payment Cash $3.00
Unit price ($2.50)preset
—————————Item Quantity 3
—————————PLU 14
—————————————Payment Cash $10.00
Unit price ($2.00)preset
—————————Item Quantity 10
—————————PLU 7
—————————————Payment Cash $20.00
— Quantity/result
or
— Quantity/unit q’ty/@
— Result
38
Basic Operations and Setups
Split sales of packaged itemOPERATION RECEIPT
3xxxxx
5xxxxx
28+s
15-F
• If x is not allocated on the keyboard, key allocation is necessary.
Open PLUOPERATION RECEIPT
30+3280:
31+13-:
:
s60-F
• Before registering an open PLU, it is necessary to preset it as an open PLU.
REG 03-04-2000 10:00
C01 MC#01 000013
3 PLU0028 •12.00
3 @5/ 20.00
PLU0028 •12.00
TL •12.00
CASH •15.00
CG •3.00
Unit price (5for$20.00)preset
——————————Item Quantity 3
——————————PLU 28
——————————————Payment Cash $15.00
Quantity being purchased(4-digit integer/2-digit decimal)
Package quantity(4-digit integer/2-digit decimal)
— Quantity/result
or
— Quantity/unit q’ty/@
— Result
REG 03-04-2000 10:05
C01 MC#01 000014
1 PLU0030 •32.80
1 PLU0031 •13.00
1 PLU0031 •13.00
TL •58.80
CASH •60.00
CG •1.20
Unit price $32.80——————————
Item 1 Quantity 1——————————
PLU 30——————————————
Unit price $13.00——————————
Item 2 Quantity 2——————————
PLU 31——————————————Payment Cash $60.00
Unit price
Repeat
39
Bas
ic O
pera
tions
and
Set
ups
TK-7000/7500 User’s Manual
Shifting the taxable status of an itemBy pressing “Tax Shift” key, you can shift the taxable status of an item.
Calculation merchandise subtotalOPERATION RECEIPT
4-!ttttt
2-"
TTTTT6-#
TTTTT7-$
s20-F
Important!• To change the tax status of the next item to be registered, be sure to press t, T.
If the last item registered is programmed as nontaxable, a discount (p key) operation on this item isalways nontaxable.
In this case, you cannot manually change the tax status to Taxable 1 or 2 by pressing the t, Tkeys.
Dept. 1 $4.00—————————
Item 1 Quantity 1—————————Taxable (2)preset
—————————————Dept. 2 $2.00
—————————Item 2 Quantity 1
—————————Taxable (No)→1
—————————————Dept. 3 $6.00
—————————Item 3 Quantity 1
—————————Taxable (1)→1, 2
—————————————Dept. 4 $7.00
—————————Item 4 Quantity 1
—————————Taxable (2)→No
—————————————Payment Cash $20.00
Pressing t changes the tax statusfrom Nontaxable to Taxable 1
Pressing T changes the tax statusfrom Taxable 1 to Taxable 1, 2
Pressing T changes the tax statusfrom Taxable 2 to Nontaxable
REG 03-04-2000 10:10
C01 MC#01 000015
1 DEPT01 T2 •4.00
1 DEPT02 T1 •2.00
1 DEPT03 T12 •6.00
1 DEPT04 •7.00
TA1 •8.00
TX1 •0.32
TA2 •10.00
TX2 •0.50
TL •19.82
CASH •20.00
CG •0.18
Mode switch
REG
40
Basic Operations and Setups
Applies the preset discountrate to the last item registered.
The input value takes priorityof the preset value.
6 1s 6 : : : : 6 p 6 sMode switch
PGMPreset rate
Example:
10% 2 10 5.5% 2 5^5
12.34% 2 12^34
Mode switch
REG
Registering discountsThe following example shows how you can use the p key in various types ofregistration.
Discount for items and subtotalsOPERATION RECEIPT
5-!16+
ppppp
sssss3^5ppppp
s15-F
• You can manually input rates up to 4 digits long (0.01% to 99.99%).
Taxable status of the p key• Whenever you perform a discount operation on the last item registered, the tax calculation for discount amount
is performed in accordance with the tax status programmed for that item.
• Whenever you perform a discount operation on a subtotal amount, the tax calculation for the subtotal amount isperformed in accordance with the tax status programmed for the p key.
Preparing and using discountsThis section describes how to prepare and register discounts.
Programming discounts
To program a rate to the p key
REG 03-04-2000 10:15
C01 MC#01 000016
1 DEPT01 T1 •5.00
1 PLU0016 T2 •10.00
5%
%- T2 -0.50
ST •14.50
3.5%
%- -0.51
TA1 •5.00
TX1 •0.20
TA2 •9.50
TX2 •0.48
TL •14.67
CASH •15.00
CG •0.33
Dept. 1 $5.00—————————
Item 1 Quantity 1—————————
Taxable (1)preset
—————————————PLU 16 ($10.00)
preset—————————
Item 2 Quantity 1—————————
Taxable (2)preset
—————————————Discount Rate (5%)preset—————————————Subtotal Rate 3.5%
———————––––discount Taxable Nontaxable—————————————Payment Cash $15.00
41
Bas
ic O
pera
tions
and
Set
ups
TK-7000/7500 User’s Manual
6 1s 6 : : : : : : 6 m 6 sUnit priceMode switch
PGM
Preparing and using reductionsThis section describes how to prepare and register reductions.
Programming for reductionsYou can use the m key to reduce single item or subtotal amounts.
To program preset reduction amount
Registering reductionsThe following examples show how you can use the m key in various types ofregistration.
Reduction for itemsOPERATION RECEIPT
5-!25mmmmm
45+mmmmms
11-F
• You can manually input reduction values up to 7 digits long.• If you want to subtract the reduction amount from the department or PLU totalizer, program “Net totaling.”
Reduces the last amountregistered by the value input.
REG 03-04-2000 10:20
C01 MC#01 000017
1 DEPT01 T1 •5.00
- T1 -0.25
1 PLU0045 T1 •6.00
- T1 -0.50
TA1 •10.25
TX1 •0.41
TL •10.66
CASH •11.00
CG •0.34
Dept. 1 $5.00—————————
Item 1 Quantity 1—————————
Taxable (1)preset
—————————————Reduction Amount $0.25—————————————
PLU 45 ($6.00)preset
—————————Item 2 Quantity 1
—————————Taxable (1)
preset—————————————Reduction Amount ($0.50)preset—————————————Payment Cash $11.00
Mode switch
REG
42
Basic Operations and Setups
Reduces the subtotal by thevalue input here.
Reduction for subtotalOPERATION RECEIPT
3-!4-"s
75mmmmm
s7-F
REG 03-04-2000 10:25
C01 MC#01 000018
1 DEPT01 T1 •3.00
1 DEPT02 T2 •4.00
- -0.75
TA1 •3.00
TX1 •0.12
TA2 •4.00
TX2 •0.20
TL •6.57
CASH •7.00
CG •0.43
Dept. 1 $3.00—————————
Item 1 Quantity 1———————––––
Taxable (1)preset
—————————————Dept. 2 $4.00
—————————Item 2 Quantity 1
———————––––Taxable (2)
preset—————————————Subtotal Amount $0.75
———————––––Reduction Taxable (No)preset
—————————————Payment Cash $7.00
43
Bas
ic O
pera
tions
and
Set
ups
TK-7000/7500 User’s Manual
Registering credit and check paymentsThe following examples show how to register credits and payments by check.
CheckOPERATION RECEIPT
11-!s
20-kkkkk
CreditOPERATION RECEIPT
15-$s
1234NNNNNccccc
Mixed tender (cash, credit and check)OPERATION RECEIPT
55-$s
30-kkkkk5-FFFFF
ccccc
Mode switch
REG
Dept. 4 $15.00Item —————————
Quantity 1—————————————Reference Number 1234—————————————Payment Credit $15.00
Dept. 4 $55.00Item —————————
Quantity 1—————————————
Check $30.00—————————
Payment Cash $5.00—————————
Credit $20.00
Dept. 1 $11.00Item —————————
Quantity 1—————————————Payment Check $20.00
REG 03-04-2000 10:30
C01 MC#01 000019
1 DEPT01 •11.00
TL •11.00
CHECK •20.00
CG •9.00
REG 03-04-2000 10:35
C01 MC#01 000020
1 DEPT04 •15.00
#/NS 1234
TL •15.00
CREDIT1 •15.00
— Reference No.
REG 03-04-2000 10:40
C01 MC#01 000021
1 DEPT04 •55.00
TL •55.00
CHECK •30.00
CASH •5.00
CREDIT1 •20.00
44
Basic Operations and Setups
Registering both the Euro and local currency
The following example shows the basic operation using the currency exchangefunction between the Euro and the local currency.
Case A
OPERATION DISPLAY
600!
qqqqq
s
qqqqq
15-
a
RECEIPT
Mode switch
REG
ycnerrucniaM lacoL
tnemyaP oruE
egnahC lacoL
etaR rFF5.0=oruE1
~00e
1"00e
~00e
1%00e
!50
1 Press the q key, which converts the subtotal amountinto the sub currency by applying the preset exchangerate.After you press the s key, the result is shown on thedisplay.
1 Press the q key if you enter the payment in the subcurrency.
1 Press the a key to finalize the transaction.The change amount is shown in the programmedcurrency.
REG 03-04-2000 10:45
C01 MC#01 000022
1 DEPT01 •6.00
TL •6.00
(⁄12.00)
EURO money
CASH ⁄15.00
CG •1.50
(⁄3.00)
45
Bas
ic O
pera
tions
and
Set
ups
TK-7000/7500 User’s Manual
ycnerrucniaM oruE
tnemyaP lacoL
egnahC oruE
etaR rFF5.0=oruE1
~00l
&00l
~00l
&00l
~00
Case B
OPERATION DISPLAY
12-!
qqqqq
s
qqqqq
6-
a
RECEIPT
1 Press the q key, which converts the subtotal amountinto the sub currency by applying the preset exchangerate.After you press the s key, the result is shown on thedisplay.
1 Press the q key if you enter the payment in the subcurrency.
1 Press the a key to finalize the transaction.The change amount is shown in the programmedcurrency.
REG 03-04-2000 10:50
C01 MC#01 000023
1 DEPT01 ⁄12.00
TL ⁄12.00
(•6.00)
LOCAL money
CASH •6.00
CG ⁄0.00
(•0.00)
46
Basic Operations and Setups
Validation printingYou can perform total amount validation following finalization using a, h, k,c, d keys and r, P keys. Also you can perform single item validation.
Total amount validationOPERATION RECEIPT
14-!s
20-k
1 Open the journal window.
2 Insert paper.
3 Press vvvvv.
Dept. 1 $14.00Item —————————
Quantity 1—————————————Payment Check $20.00—————————————
Validation
REG 03-04-2000 10:55
C01 MC#01 000024
1 DEPT01 •14.00
TL •14.00
CHECK •20.00
CG •6.00
1
2
REG C01 030400 1055 MC#01 024 CHECK •14.00
REG C01 030400 1055 MC#01 000024 CHECK •14.00
70 m
m M
in.
135 mm ~ 210 mm
Mode (4 digits)Clerk name (6 digits)Date (6 digits), Time (4 digits)Machine/Cons. No. (6 digits ea.)Key descriptorAmount
Format A
Format B
Validation sample
Mode switch
REG
47
Bas
ic O
pera
tions
and
Set
ups
TK-7000/7500 User’s Manual
Registering returned goods in the RF modeThe following examples show how to use the RF mode to register goods returned bycustomers.
Normal refund transactionOPERATION RECEIPT
150!!6X2+F
• The model for the U.S./Canada, use x instead of X.
Mode switch
RF
Returned Dept. 1 $1.50—————————
Item 1 Quantity 2—————————————
Returned PLU 2 ($1.20)preset
—————————Item 2 Quantity 6
—————————————Payment Cash $10.20
RF 03-04-2000 11:05
C01 MC#01 000026
1 DEPT01 •1.50
1 DEPT01 •1.50
6 PLU0002 •7.20
TL •10.20
CASH •10.20
—————————————— RF mode symbol
Registering returned goods in the REG modeThe following example shows how to use the R key in the REG mode to registergoods returned by customers.
OPERATION RECEIPT
235!2-"1+RRRRR
235!
RRRRR1+sF
Dept. 1 $2.35Item 1 —————————
Quantity 1—————————————
Dept. 2 $2.00Item 2 —————————
Quantity 1—————————————
PLU 1 ($1.20)preset
Item 3 —————————Quantity 1
—————————————
Returned Dept. 1 $2.35—————————
Item 1 Quantity 1—————————————
Returned PLU 1 ($1.20)preset—————————
Item 3 Quantity 1—————————————Payment Cash $2.00
Press R before the item youwant to return.
REG 03-04-2000 11:00
C01 MC#01 000025
1 DEPT01 •2.35
1 DEPT02 •2.00
1 PLU0001 •1.20
RF •••••••••
1 DEPT01 -2.35
RF •••••••••
1 PLU0001 -1.20
TL •2.00
CASH •2.00
Mode switch
REG
48
Basic Operations and Setups
Reduction of amounts paid on refundOPERATION RECEIPT
4-#15m2+psF
Important!• To avoid miss registrations in the RF mode, return the mode switch to the former position immediately.
Registering money received on accountThe following example shows how to register money received on account. Thisregistration must be performed out of a sale.
OPERATION RECEIPT
7--rrrrrAmount can be up to 8 digits.
Registering money paid outThe following example shows how to register money paid out from the register. Thisregistration must be performed out of a sale.
OPERATION RECEIPT
PPPPP150 or
qqqqqAmount can be up to 8 digits.
Received amount $700.00 REG 03-04-2000 11:15
C01 MC#01 000028
RC •700.00
Mode switch
REG
Paid out amount $1.50
Mode switch
REG
REG 03-04-2000 11:20
C01 MC#01 000029
PD •1.50
Returned Dept. 3 $4.00—————————
Item 1 Quantity 1—————————————Reduction Amount $0.15—————————————
Returned PLU 2 ($1.20)preset—————————
IItem 2 Quantity 1—————————————Discount Rate (5%)preset—————————————Payment Cash $5.20
RF 03-04-2000 11:10
C01 MC#01 000027
1 DEPT03 T1 •4.00
- T1 -0.15
1 PLU0002 T2 •1.20
5%
%- T2 -0.06
TA1 •3.85
TX1 •0.15
TA2 •1.14
TX2 •0.06
TL •5.20
CASH •5.20
49
Bas
ic O
pera
tions
and
Set
ups
TK-7000/7500 User’s Manual
Registering loan amountsUse this procedure to register loan or bank received from the office.
OPERATION RECEIPT
10X1-lllll5X5-llllla
• The model for the U.S./Canada, use x instead of X.
Registering pick up amountsUse this procedure to register pick up money from cash drawer.
OPERATION RECEIPT
10X50LLLLL5X10LLLLLa
• The model for the U.S./Canada, use x instead of X.
Changing media in drawerUse this procedure to change media in drawer.
OPERATION RECEIPT
iiiii10-k
Enter the amount to be changed.
8-a2-h
REG 03-04-2000 11:25
C01 MC#01 000030
LOAN •10.00
LOAN •25.00
CASH •35.00
Mode switch
REG
Mode switch
REG
Note $1.00—————————Quantity 10
Item —————————Note $5.00
—————————Quantity 5
—————————————Media Cash $35.00
Coin $0.50—————————Quantity 10
Item —————————Coin $0.10
—————————Quantity 5
—————————————Media Cash $5.50
REG 03-04-2000 11:30
C01 MC#01 000031
P.UP •5.00
P.UP •0.50
CASH •5.50
Mode switch
REG
Check -10.00—————————
Media Cash $8.00—————————
Charge $2.00
REG 03-04-2000 11:35
C01 MC#01 000032
MEDIA CHG •••••••••
CHECK •10.00
CASH •8.00
CH •2.00
50
Basic Operations and Setups
Making corrections in a registrationThere are three techniques you can use to make corrections in a registration.• To correct an item that you input but not yet registered.• To correct the last item you input and registered.• To cancel all items in a transaction.
To correct an item you input but not yet registeredOPERATION RECEIPT
2-C
1-!12XC
11X2-"2C
3+15+6-C
15+
10-:s
10-C
15-Fc
• The model for the U.S./Canada, use x instead of X.
—
— Correction of unit price
—
—
— Correction of quantity
—
—
— Correction of PLU No.
—
—
— Correction of open PLU unit price
—
—
— Correction of partial tender amount
—
REG 03-04-2000 11:40
C01 MC#01 000033
1 DEPT01 •1.00
11 DEPT02 •22.00
1 PLU0003 •1.30
1 PLU0015 •10.00
TL •34.30
CASH •15.00
CREDIT1 •19.30
Mode switch
REG
Enter PLU No. again.
51
Bas
ic O
pera
tions
and
Set
ups
TK-7000/7500 User’s Manual
To correct an item you input and registeredOPERATION RECEIPT
1-!2-""e2+e5+
15+6-:e
15+10-:8X
4-$e6X
4-$s
50pes5p
R2-"e
R220"s
20-Fe
15-Fc
• The model for the U.S./Canada, use x instead of X.
REG 03-04-2000 11:45
C01 MC#01 000034
1 DEPT01 •1.00
1 DEPT02 •2.00
1 DEPT02 •2.00
CORR -2.00
1 PLU0002 •1.20
CORR -1.20
1 PLU0005 •1.50
1 PLU0015 •6.00
CORR -6.00
1 PLU0015 •10.00
8 DEPT04 •32.00
CORR -32.00
6 DEPT04 •24.00
ST •38.50
50%
%- -19.25
CORR •19.25
ST •38.50
5%
%- -1.93
RF •••••••••
1 DEPT02 -2.00
CORR •2.00
RF •••••••••
1 DEPT02 -2.20
TL •34.37
CASH •20.00
CORR -20.00
CASH •15.00
CREDIT1 •19.37
—
—— Clearance
—
— Correction of PLU No.
—
—
— Correction of open
PLU unit price
—
—
— Correction of quantity
—
—
— Correction of discount
—
—
— Correction of refund item
—
—
— Correction of partial tender
—
52
Basic Operations and Setups
To cancel all items in a transactionOPERATION RECEIPT
1-!2-"3-#4-$s
e
No sale registrationYou can use the following procedure to open the drawer without registering a sale.This operation must be performed out of a sale.
OPERATION RECEIPT
N
REG 03-04-2000 11:50
C01 MC#01 000035
1 DEPT01 •1.00
1 DEPT02 •2.00
1 DEPT03 •3.00
1 DEPT04 •4.00
CANCEL •••••••••
REG 03-04-2000 11:55
C01 MC#01 000036
#/NS •••••••••
Pressing s key is necessary to cancelthe transaction.
Mode switch
REG
53
Bas
ic O
pera
tions
and
Set
ups
TK-7000/7500 User’s Manual
CHARGE No 56
•1,174.85
RC No 4
•810.00
PD No 5
•520.00
•5.00
CORR No 14
•39.55
VLD No 19
RCT No 3
NS No 5
------------------------
Z DEPT 0001
0001015
DEPT01 203.25
•1,108.54
DEPT02 183
•1,362.26
DEPT04 5
•17.22
------------------------
TL 421.25
•2,872.28
------------------------
Z CASHIER 0001
0001017
C01 ...........1
GROSS 421.25
•2,872.28
NET No 111
•1,845.35
CAID •1,057.14
CHID •139.04
RF No 1
•1.00
CLEAR No 5
•4.43
C02 ...........1
Z 03-04-2000 17:00
C01 MC#01 000231
------------------------
Z BATCH01
------------------------
Z FIX 0001
0001011
GROSS 981.25
•6,574.40
NET No 111
•7,057.14
CAID •1,919.04
CHID •139.04
CKID •859.85
CRID(1) •709.85
------------------------
RF No 3
•10.22
CUST CT 111
AVRG •63.57
DC •1.22
REF •2.42
CLEAR No 85
ROUND •0.00
CANCEL No 2
•12.97
------------------------
TA1 •2,369.69
TX1 •128.86
TA2 •2,172.96
TX2 •217.33
------------------------
GT1 •00000000125478.96
GT2 •00000000346284.23
GT3 •00000000123212.75
------------------------
Z TRANS 0001
0001012
CASH No 362
•1,638.04
— Date/time
— Clerk name/mc No./consecutive No.
— Report title
— Fixed total report title/reset counter
— Report code
— Gross total *2
— Net total *2
— Cash in drawer *2
— Charge in drawer *2
— Check in drawer *2
— Credit in drawer *2
— Refund mode *2
— Number of customer *2
— Average sales per customer *2
— Discount total *2
— Refund key *2
— Clear key count *2
— Rounding total *2
— Cancellation *2
— Taxable 1 amount *2
— Tax 1 amount *2
— Taxable 2 amount *2
— Tax 2 amount *2
— Grand total 1 *2
— Grand total 2 *2
— Grand total 3 *2
— Function key report title/reset counter
— Report code
— Function key count/amount *1
— Department report title/reset counter
— Report code
— Department count/amount *1
— Department total count/total amount
— Clerk report title/reset counter
— Report code
— Clerk name/drawer No. *1
— Gross total *1
— Net total *1
— Cash in drawer *1
— Refund mode *1
— Clear key count *1
— Clerk name/drawer No.
Printing the daily sales reset reportThis report shows daily sales totals.
OPERATION REPORT
8
F
Mode switch
Z1
*1 Zero totalled departments/functions/clerks are not printed byprogramming.
*2 These items can be skipped by programming.
54
Advanced Operations
This chapter describes more sophisticated operations that you can use to suit the needs of your retailenvironment.
Stock checkEach PLU has an actual stock totalizer that you can program with a minimum stock quantity. Then the registerchecks actual stock quantities against the programmed minimum stock quantities. Stock operations areperformed only for PLUs (except scanning PLUs) programmed with minimum stock quantities.
Stock warningsThe cash register checks for negative values in actual stock quantities during the registration itself. Afterregistration is complete, it checks actual stock quantities against minimum stock quantities. The followingwarning indicators are used to inform the operator of any problem.• Negative stock:This indicates that the actual stock quantity is negative. You can also program the cash register to treat thiscondition as an error. This warning does not appear when the actual stock quantity is zero.• Under minimum stock:This indicates that the actual stock quantity is less than or equal to the minimum stock quantity. The cashregister can be programmed so that a buzzer sounds when the actual stock quantity is less than the minimumstock quantity.Notes• The stock check operation is also performed for PLUs programmed with minimum stock quantities that makeup set menus.• None of the warning indicators appear unless the cash register is specifically programmed for the stock checkoperation.• Stock operations can be performed for registrations in the RF mode or those performed with <REFUND> (therefund key).• An error correct, void, or cancel operation restores the original of items in stock value.
Clerk interrupt functionThere are two types of clerk interrupt function, illustrated by PROCEDURE 1 and PROCEDURE 2 below.• In PROCEDURE 1, each clerk possesses a unique clerk interrupt buffer, and so the clerk interrupt functiongives each individual clerk the ability to perform an independent registration operation. In this case, each clerkis individually linked to a unique clerk interrupt buffer.• In PROCEDURE 2, multiple clerks use the same clerk interrupt buffer, and so a single clerk interruptoperation (clerk change during registration) can be performed any registration is in progress. In this case,multiple clerks are linked to a single clerk interrupt buffer.Note the following important points concerning the clerk interrupt function.• The register must be programmed to allow use of the clerk interrupt function.• To use the clerk interrupt function, a clerk interrupt buffer must first be allocated with the memory allocationoperation. Next the manager control operation (X1 mode) should be used to perform clerk assignment for theclerk interrupt function. The clerk interrupt operation cannot be performed by clerks who are not linked to aclerk interrupt buffer.• You cannot use the clerk interrupt function on a register set up to function as part of a check tracking system.In the REG1, REG2, and RF modes, clerks can be change while a transaction is in progress, making it possiblefor multiple clerks to simultaneously perform registrations using a single register.For example, if clerk 1 is interrupted while registering a transaction, clerk 2 can use the same machine toregister a different transaction. Then clerk 1 can continue the original registration from the point where it wasinterrupted.
55
Adv
ance
d O
pera
tions
TK-7000/7500 User’s Manual
Clerk 1
Clerk 2
Sign on
Sign on
Sign on
Sign on
Sign on
Registration A Post receipt AFinalization A
Finalization BRegistration B
<NEW BALANCE>
<NEW BALANCE>
<CASH>
<CASH>
<RECEIPT>
PROCEDURE 1
PROCEDURE 2
Clerk 1
Clerk 2
Sign on
Sign on
Sign on
Registration A Finalization A + B
Registration B
<NEW BALANCE>
<NEW BALANCE>
<CASH>
NOTES• A guest receipt can be issued following clerk change, and receipts can be issued separately for each clerk.• A cancel operation can be performed during registration by either of the clerks. When clerk 1 signs back on
(after being interrupt by clerk 2), the cancel operation cancels only the items registered after signing back on(only this receipt) or from the top of the transaction. This is selectable by the key program.
Single item cash salesA department key or PLU programmed with single item sale status finalizes the transaction as soon as it isregistered.The single item sales function cannot work properly if the keyboard does not include <CASH> (the cash key).The single item sales function can only be used for cash sales.
Example 1OPERATION RECEIPT
1-!!!!!Dept. 1 $1.00——————————
Item Quantity 1——————————
Status S.I.S—————————————Payment Cash $1.00
The transaction is immediatelyfinalized.
REG 03-04-2000 13:00
C01 MC#01 000101
1 DEPT01 •1.00
TL •1.00
CASH •1.00
— Mode/date/time
— Clerk/consecutive No.
— Department No./unit price
— Cash total amount
56
Advanced Operations
AdditionAddition (plus)
ExampleOPERATION RECEIPT
1-!10BBBBB3X2-!3XBBBBBF
• The model for the U.S./Canada, use x instead of X.
Example 2OPERATION RECEIPT
3X!!!!!
• The model for the U.S./Canada, use x instead of X.
Example 3OPERATION RECEIPT
2-#!!!!!
F
The transaction is immedi-ately finalized.
The transaction is not finalized.Because another item isregistered before the single itemsales department.
REG 03-04-2000 13:05
C01 MC#01 000102
3 DEPT01 •3.00
TL •3.00
CASH •3.00
REG 03-04-2000 13:10
C01 MC#01 000103
1 DEPT03 •2.00
1 DEPT01 •1.00
TL •3.00
CASH •3.00
Dept. 1 ($1.00)——————————
Item Quantity 3——————————
Status S.I.S—————————————Payment Cash $3.00
Dept. 3 $2.00——————————
Item 1 Quantity 1——————————
Status Normal—————————————
Dept. 1 $1.00——————————
Item 2 Quantity 1——————————
Status S.I.S—————————————Payment Cash $3.00
+
+
Dept. 1 $1.00——————————
Item 1 Quantity 1——————————Addition $0.10
—————————————Dept. 1 $2.00
——————————Item 2 Quantity 3
——————————Addition 3 × ($0.20)
—————————————Payment Cash $7.70
REG 03-04-2000 13:15
C01 MC#01 000104
1 DEPT01 •1.00
+ •0.10
3 DEPT01 •6.00
+ •0.60
TL •7.70
CASH •7.70
57
Adv
ance
d O
pera
tions
TK-7000/7500 User’s Manual
Premium (%+)
ExampleOPERATION RECEIPT
1-!10BBBBB3X2-!
sssssBBBBBF
• The model for the U.S./Canada, use x instead of X.
%+
%+
Dept. 1 $1.00——————————
Item 1 Quantity 1——————————Premium 10%
—————————————Dept. 1 $2.00
Item 2 ——————————Quantity 3
—————————————SubtotalPremium (15%)—————————————Payment Cash $8.17
REG 03-04-2000 13:20
C01 MC#01 000105
1 DEPT01 •1.00
10%
%+ •0.10
3 DEPT01 •6.00
ST •7.10
15%
%+ •1.07
TL •8.17
CASH •8.17
58
Advanced Operations
Tray totalTray total premium/discount
The buffer memory stores all items that fall into the prescribed range, starting from the first item registered fora transaction up to the point that <TRAY TOTAL> (the tray total key) is pressed to perform a tray totalpremium/discount operation. Following a premium/discount operation, the buffer is cleared and storage of newdata starts from registration of the next item following the first premium/discount operation. The followingoperations clear the buffer memory.
• Press <TRAY TOTAL> twice.• Press <TRAY TOTAL> and then perform a premium/discount operation. The contents of the buffer memory are
restored if an error correction operation is performed to delete the premium/discount operation.
ExampleOPERATION RECEIPT
1-!2-#
BBBBBp
3-#4-$
BBBBB10pF
Multiple item totalling functionThis function accumulates all items registered from the first item registered up to point that <TRAY TOTAL>is pressed, or all items between two presses of <TRAY TOTAL>. Pressing <TRAY TOTAL> displays the totalamount with the tax included and prints it on the receipt and journal (printing on receipt and journal isprogrammable.)
ExampleOPERATION RECEIPT
1-!2-#
BBBBB3-#4-$
BBBBBF
Dept. 1 $1.00——————————
Group 1 Dept. 3 $2.00——————————Discount (5%)
preset—————————————
Dept. 3 $3.00——————————
Group 2 Dept. 4 $4.00——————————Discount 10%
—————————————Payment Cash $9.15
REG 03-04-2000 13:25
C01 MC#01 000106
1 DEPT01 •1.00
1 DEPT03 •2.00
TRAY TL •3.00
5%
%- -0.15
1 DEPT03 •3.00
1 DEPT04 •4.00
TRAY TL •7.00
10%
%- -0.70
TL •9.15
CASH •9.15
TRAYTOTAL
REG 03-04-2000 13:30
C01 MC#01 000107
1 DEPT01 •1.00
1 DEPT03 •2.00
TRAY TL •3.00
1 DEPT03 •3.00
1 DEPT04 •4.00
TRAY TL •7.00
TL •10.00
CASH •10.00
TRAYTOTAL
Dept. 1 $1.00CustomerA——————————
Dept. 3 $2.00—————————————
Dept. 3 $3.00CustomerB——————————
Dept. 4 $4.00—————————————Payment Cash $10.00
TRAYTOTAL
TRAYTOTAL
59
Adv
ance
d O
pera
tions
TK-7000/7500 User’s Manual
Coupon transactionsNote that errors result when the result of a calculation is negative if the cash register is programmed to prohibitcredit balances.
Coupon registration using <COUPON> (coupon key)
ExampleOPERATION RECEIPT
2X3-!2X50BBBBB4-#
BBBBBF
• The model for the U.S./Canada, use x instead of X.
Coupon registration using <COUPON2> (coupon 2 key)
ExampleOPERATION RECEIPT
15-!BBBBB150!10+BBBBB50+
F
Dept. 1 $3.00——————————
Item 1 Quantity 2——————————Coupon $0.50 × 2
—————————————Dept. 3 $4.00
——————————Item 2 Quantity 1
——————————Coupon ($1.00)
—————————————Payment Cash $8.00
REG 03-04-2000 13:35
C01 MC#01 000108
2 DEPT01 •6.00
CPN -1.00
1 DEPT03 •4.00
CPN -1.00
TL •8.00
CASH •8.00
CPN
CPN
Dept. 1 $15.00——————————
Item 1Quantity 1
——————————Coupon 2 $1.50Dept. 1
—————————————PLU 10 $5.00
——————————
Item 2Quantity 1
——————————Coupon 2 ($0.50)PLU 50
—————————————Payment Cash $18.00
CPN2
CPN2
REG 03-04-2000 13:40
C01 MC#01 000109
1 DEPT01 •15.00
CPN2 •••••••••
1 DEPT01 -1.50
1 PLU0010 •5.00
CPN2 •••••••••
1 PLU0050 -0.50
TL •18.00
CASH •18.00
60
Advanced Operations
Registering the second unit priceSecond unit prices along with quantity modifiers can be programmed to PLUs. Pressing <PRICE SHIFT>(price shift key) calls up the second unit price, quantity modifier, and descriptor. Totalizers and inventory areadjusted by multiplying the number of items being registered by the quantity modifier programmed to the PLUbeing registered.
• <PRICE SHIFT> must be pressed before each registration of a PLU.• Second unit price registration is no available with open PLUs when unit price is not preset.• Second unit prices and quantity modifiers are assigned to PLUs using programming procedures described in the
dealer’s manual.• Even if a PLU is programmed with a package quantity, the second unit price and quantity modifier are applied
during registration following operation of <PRICE SHIFT>.
Example 1OPERATION RECEIPT
BBBBB1+
BBBBB10+sF
Example 2OPERATION RECEIPT
5XBBBBB2+
50-F
• The model for the U.S./Canada, use x instead of X.
PLU 1 2nd@
($10.00)——————————
Item 1 Quantity 1——————————Unit Q’ty 1
—————————————PLU 2
2nd@($5.00)
——————————Item 2 Quantity 1
——————————Unit Q’ty 1
—————————————Payment Cash $15.00
PRICESHIFT REG 03-04-2000 13:45
C01 MC#01 000110
1 PLU001 •10.00
1 PLU010 •5.00
TL •15.00
CASH •15.00
The operation declares thatthe next input is a secondunit price.
PLU 2 2nd@
($10.00)——————————
Item Quantity 5——————————2nd Q’ty 3
—————————————Payment Cash $50.00
REG 03-04-2000 13:50
C01 MC#01 000111
5 PLU001 •50.00
TL •50.00
CASH •50.00
CG •0.00
PRICESHIFT
PRICESHIFT
61
Adv
ance
d O
pera
tions
TK-7000/7500 User’s Manual
Example 3The procedure shown above are for when the cash register is programmed not to maintain a second unit priceshift. It is programmed is performed to maintain a second unit price shift, the following procedure applies.
OPERATION RECEIPT
BBBBB1+
2+BBBBBBBBBB1+
16-F
REG 03-04-2000 13:55
C01 MC#01 000112
1 PLU001 •10.00
1 PLU002 •5.00
1 PLU001 •1.00
TL •16.00
CASH •16.00
CG •0.00
This operation shifts back toregistration of normal (first)unit price.
This operation shifts to registra-tion of second unit price.
PLU 1 2nd@ ($10.00)
——————————Item 1 Quantity 1
——————————Unit Q’ty 1
—————————————PLU 2
2nd@ ($5.00)——————————
Item 2 Quantity 1——————————Unit Q’ty 1
—————————————PLU 1 ($1.00)
——————————Item 3 Quantity 1
——————————Unit Q’ty 1
—————————————Payment Cash $16.00
Preset tender amountAn amount up to six digits long can be programmed to <CASH> (cash/amount tendered key). Then, when<CASH> is pressed without inputting a value, the programmed value is automatically registered and thetransaction is finalized. When an amount is programmed to <CASH>, attempting to manually input an amountresults in an error.
Example 1OPERATION RECEIPT
8-!FFFFF
Example 2OPERATION RECEIPT
15-!10-F
C5-kFFFFF
Dept. 1 $8.00Item ——————————
Quantity 1—————————————Payment Cash ($10.00)
REG 03-04-2000 14:00
C01 MC#01 000113
1 DEPT01 •8.00
TL •8.00
CASH •10.00
CG •2.00
The preset amount is tendered.
Dept. 1 $15.00Item ——————————
Quantity 1—————————————
Cash ($10.00)Payment ——————————
Check $5.00
REG 03-04-2000 14:05
C01 MC#01 000114
1 DEPT01 •15.00
TL •15.00
CHECK •5.00
CASH •10.00
CG •0.00
An error occurs by manual input
PRICESHIFT
PRICESHIFT
PRICESHIFT
62
Advanced Operations
Bottle link operationYou can link PLU to a PLU.
ExampleOPERATION RECEIPT
1+3X2+
30-F
• The model for the U.S./Canada, use x instead of X.
Bottle returns
Bottle return keyYou can use the linked bottle return key to register a bottle return. A PLU whose programmed unit pricerepresents the contents of the bottle, can be linked with PLU whose programmed unit price represents thedeposit on the bottle. In the following example, the bottle return key has been programmed to operate as alinked bottle return key.The bottle return key must be pressed before input of each new linked bottle return.
ExampleOPERATION RECEIPT
BBBBB1+3XBBBBB2+F
• The model for the U.S./Canada, use x instead of X.
PLU 1 ($8.00)——————————
Item 1 PLU 11linked
($0.80)——————————Quantity 1
—————————————PLU 2 ($5.00)
——————————Item 2 PLU 12
linked($0.50)
——————————Quantity 3
—————————————Payment Cash $30.00
REG 03-04-2000 14:10
C01 MC#01 000115
1 PLU0001 •8.00
1 PLU0011 •0.80
3 PLU0002 •15.00
3 PLU0012 •1.50
TL •25.30
CASH •30.00
CG •4.70
PLU 1 ($8.00)
Return ——————————PLU 11
linked($0.80)Item 1 ——————————
Quantity 1—————————————
PLU 2 ($5.00)
Return ——————————PLU 12
linked($0.50)Item 2 ——————————
Quantity 3—————————————Payment Cash $2.30
REG 03-04-2000 14:15
C01 MC#01 000116
BR •••••••••
1 PLU0011 -0.80
BR •••••••••
3 PLU0012 -1.50
TL -2.30
CASH -2.30
BR
BR
63
Adv
ance
d O
pera
tions
TK-7000/7500 User’s Manual
Arrangement key registrationsKey operations can be assigned to an <ARRANGE> (arrangement key). Then, simply pressing <ARRANGE>performs all of the key functions assigned to it.Key operations can also be assigned to an address code. Then, when you input the address code using<ARRANGE>, all of the key functions assigned to the address code are performed.
Example 1OPERATION RECEIPT
AAAAA
Example 2OPERATION RECEIPT
5AAAAA
Arrangement 1—————————————
PLU 1 ($8.00)Item 1 ——————————
Quantity 1—————————————
PLU 2 ($5.00)Item 2 ——————————
Quantity 1—————————————Payment Cash $13.00
REG 03-04-2000 14:20
C01 MC#01 000117
1 PLU0001 •8.00
1 PLU0002 •5.00
TL •13.00
CASH •13.00
Arrangement 5—————————————
Dept 1 $1.00Item 1 ——————————
Quantity 1—————————————
Dept 2 $2.00Item 2 ——————————
Quantity 1—————————————Payment Cash $3.00
REG 03-04-2000 14:25
C01 MC#01 000118
1 DEPT01 •1.00
1 DEPT02 •2.00
TL •3.00
CASH •3.00
Set menuWhen you register a set menu, its total amount is added to the PLU totalizer and counter. The price of each setmenu item is also added to each respective PLU totalizer and counter.
ExampleOPERATION RECEIPT
35+++++F
Set menu PLU 35 $5.00—————————————
Item 1 PLU 1 --——————————
Item 2 PLU 2 --—————————
Item 3 PLU 3 --——————————
Item 4 PLU 4 --—————————————Payment Cash $5.00
REG 03-04-2000 14:30
C01 MC#01 000119
1 PLU0035 •5.00
PLU0001
PLU0002
PLU0003
PLU0004
TL •5.00
CASH •5.00
64
Advanced Operations
(Displays in ¥: 3,150)
(Displays in $)
(Displays in $)
(Displays in $)
(5,000)
Currency exchange functionWhen <CE> (currency exchange key) is pressed, a current subtotal including tax is converted directly intoforeign currency and the result is displayed, and the subsequent finalization is handled using the foreigncurrency. The currency exchange function is released by finalizing a transaction, partial tender operation,receipt issuance, or by pressing <SUBTOTAL>.Before using the currency exchange function, it is necessary to program the conversion rate.
Registering foreign currency
Full amount tender in foreign currency* Pre-programmed exchange rate: ¥ 100 = $0.9524
Important!Tenders in a foreign currency can be registered using the a and k only.
Other finalize keys cannot be used.
OPERATION DISPLAY RECEIPT
5 Enter the unit price and press theapplicable department key.
5 Enter the next unit price and pressthe applicable department key.
5 Press E and s without en-tering a numeric value. This op-eration converts the subtotal (in-cluding tax) dollar value into yenby applying a pre-programmed ex-change rate. The result is shownon the display and printed on thereceipt/journal by programming.
5 Enter the amount tendered in yenand press E. This operationconverts the entered yen amountinto dollars by applying a pre-programmed exchange rate. Theresult is shown on the display.
5 Press to finalize the transaction.Note that you do not need to reen-ter the dollar amount.The register automatically calcu-lates the change amount due indollars and shows it on the dis-play, receipts and journal.
10-!
20-"
EsEsEsEsEs
50-EEEEE
a
REG 03-04-2000 14:35
C01 MC#01 000120
1 DEPT01 •10.00
2 DEPT02 •20.00
TL •30.00
CE
CASH ¥5,000
CASH •47.62
CG •17.62
1~00
2~00
#150
%000
1¶62
65
Adv
ance
d O
pera
tions
TK-7000/7500 User’s Manual
Partial tender in a foreign currency* Pre-programmed exchange rate: ¥ 100 = $0.9524
Important!Partial tender in a foreign currency can be registered using a and k only. Other finalizationkeys cannot be used, but the remaining tender can be finalized using any finalize key.
OPERATION DISPLAY RECEIPT
5 Enter the unit price and press theapplicable department key.
5 Enter the next unit price and pressthe applicable department key.
5 Press E and s without en-tering a numeric value. This op-eration converts the subtotal (in-cluding tax) dollar value into yenby applying a pre-programmed ex-change rate. The result is shownon the display and printed on thereceipt/journal by programming.
5 Enter the partial amount tenderedin yen and press E.This operation converts the en-tered yen amount into dollars byapplying a pre-programmed ex-change rate. The result is shownon the display.
5 Press a to specify cash tenderfor the yen partial tender. Notethat you do not need to reenter thedollar amount.The register automatically deductsthe dollar equivalent of the yenamount tendered from the totalamount due and shows the amounton the display.
5 Press to finalize the transaction.
10-!
20-"
EsEsEsEsEs
20-EEEEE
a
k
1~00
2~00
#150
"000
1~95
1~95
(Displays in $)
(Displays in $)
(Displays in ¥: 3,150)
(Displays in $)
(Displays in $)
(2,000)
REG 03-04-2000 14:40
C01 MC#01 000121
1 DEPT01 •10.00
1 DEPT02 •20.00
TL •30.00
CE
CASH ¥2,000
CASH •19.05
CHK •10.95
66
Advanced Operations
Food stamp functionFood stamp registration
No change due
OPERATION RECEIPT
1-!2-"KKKKK3-#
JJJJJ
2-IIIIIa
Dept. 1 $1.00Item 1 —————————
Taxable 1, F/S—————————————
Dept. 2 $2.00Item 2 —————————
Taxable 2—————————————
Dept. 3 $3.00Item 3 —————————
Taxable No → F/S—————————————
Food stamp $2.00Payment —————————
Cash $4.14
REG 03-04-2000 14:45
C01 MC#01 000122
1 DEPT01 T1 F $1.00
1 DEPT02 T2 $2.00
1 DEPT03 F $3.00
TA1 $1.00
TX1 $0.04
TA2 $2.00
TX2 $0.10
TL $6.14
FSST $4.04
FSTD $2.00
CASH $4.14
Shifting food stampstatus, press K key.
— Subtotal
— Food stamp subtotal
— Food stamp tendered
Press J, at the top ofthe food stamp tender.
Mode switch
REG
67
Adv
ance
d O
pera
tions
TK-7000/7500 User’s Manual
Mixed food stamp/cash change
Example 1OPERATION RECEIPT
1-!K2-"K3-#
J7-IIIII
The change in food stamp transactions is automatically calculated as cash for amounts of $1.00 or less, and asfood stamps for amounts greater than $1.00.
Example 2OPERATION RECEIPT
2-!J
5-IIIII
In the above example, the total amount of change due is $2.92; $2.00 in food stamps and $0.92 in cash.
Dept. 1 $2.00Item —————————
Taxable 1, F/S—————————————PaymentFood stamp $5.00
REG 03-04-2000 14:55
C01 MC#01 000124
1 DEPT01 T1 F $2.00
TA1 $2.00
TX1 $0.08
TL $2.08
FSST $2.08
FSTD $5.00
FSCG $2.00
CG $0.92
Dept. 1 $1.00Item 1 —————————
Taxable 1, F/S—————————————
Dept. 2 $2.00Item 2 —————————
Taxable 2, F/S—————————————
Dept. 3 $3.00Item 3 —————————
Taxable F/S—————————————PaymentFood stamp $7.00
REG 03-04-2000 14:50
C01 MC#01 000123
1 DEPT01 T1 F $1.00
1 DEPT02 T2 F $2.00
1 DEPT03 F $3.00
TA1 $1.00
TX1 $0.04
TA2 $2.00
TX2 $0.10
TL $6.14
FSST $6.14
FSTD $7.00
CG $0.86
— Subtotal
— Food stamp subtotal
— Food stamp tendered
— Cash change
68
Advanced Operations
Mixed food stamp/cash change (continued…)
Example 3OPERATION RECEIPT
2-!50$J
5-IIIII
When food stamp items are included in a transaction, the amount of change due in cash is applied as a cashamount tendered for cash (nonfood stamp) items. In this example, the $0.50 purchased (department 4) isautomatically deducted from the $0.92 cash due in change from the food stamp purchase (department 4).
Example 4OPERATION RECEIPT
1-!2-"3-#
JJJJJ5-Ia
The following calculation is performed internally to apply the cash change due on the food stamp transaction tothe balance due of the cash transaction.
Food stamp transaction Cash transactionPrice items: $1.00 $5.00Tax: $0.04 $0.10Total due: $1.04 $5.10Amount tendered: $5.00 (food stamp) $4.14 (cash), $0.96 (change from food stamp)Amount due: $1.04Change amount due: $3.00 (food stamp), $0.96 (cash)Total: $5.10
Dept. 1 $1.00Item 1 —————————
Taxable 1, F/S—————————————
Dept. 2 $2.00Item 2 —————————
Taxable 2—————————————
Dept. 3 $3.00Item 3 —————————
Taxable No—————————————
Food stamp $5.00Payment —————————
Cash $4.14
REG 03-04-2000 15:05
C01 MC#01 000126
1 DEPT01 T1 F $1.00
1 DEPT02 T2 $2.00
1 DEPT03 $3.00
TA1 $1.00
TX1 $0.04
TA2 $2.00
TX2 $0.10
TL $6.14
FSST $1.04
FSTD $5.00
FSCG $3.00
CASH $4.14
Dept. 1 $2.00Item 1 —————————
Taxable 1, F/S—————————————
Dept. $ $0.50Item 2 —————————
Taxable No—————————————PaymentFood stamp $5.00
REG 03-04-2000 15:00
C01 MC#01 000125
1 DEPT01 T1 F $1.00
1 DEPT04 $0.50
TA1 $2.00
TX1 $0.08
TL $2.58
FSST $2.08
FSTD $5.00
FSCG $2.00
CG $0.42
69
Adv
ance
d O
pera
tions
TK-7000/7500 User’s Manual
Food stamp registration (Illinois rule)
No change due
Example 1OPERATION RECEIPT
1-!2-!3-$J
6-IIIII
Example 2OPERATION RECEIPT
2-!3-!4-$J
5-IIIIIa
Dept. 1 $1.00Item 1 —————————
Taxable 1, F/S—————————————
Dept. 1 $2.00Item 2 —————————
Taxable 1, F/S—————————————
Dept. 4 $3.00Item 3 —————————
Taxable F/S—————————————PaymentFood stamp $6.00
REG 03-04-2000 15:10
C01 MC#01 000127
1 DEPT01 T1 F $1.00
1 DEPT01 T1 F $2.00
DEPT04 F $3.00
TL $6.00
FSST $6.00
FSTD $6.00
Dept. 1 $2.00Item 1 —————————
Taxable 1, F/S—————————————
Dept. 1 $3.00Item 2 —————————
Taxable 1, F/S—————————————
Dept. 4 $4.00Item 3 —————————
Taxable 1, F/S—————————————
Food stamp $5.00Payment —————————
Cash $4.16
REG 03-04-2000 15:15
C01 MC#01 000128
1 DEPT01 T1 F $2.00
1 DEPT01 T1 F $3.00
1 DEPT04 F $4.00
FSST $9.00
FSTD $5.00
TA1 $4.00
TX1 $0.16
CASH $4.16
70
Advanced Operations
No change due (continued…)
Example 3OPERATION RECEIPT
2-!3-"J
1-IIIIIa
If the total of the food stamps tendered is less than the food stamp total, the food stamp tendered amount isdeducted from the taxable 1 and 2 amount.
Example 4OPERATION RECEIPT
1-!5-"J
4-IIIIIa
In this case, the result of the taxable 1 amount is “0”.
Dept. 1 $2.00Item 1 —————————
Taxable 1, F/S—————————————
Dept. 2 $3.00Item 2 —————————
Taxable 2, F/S—————————————
Food stamp $1.00Payment —————————
Cash $4.14
REG 03-04-2000 15:20
C01 MC#01 000129
1 DEPT01 T1 F $2.00
1 DEPT02 T2 F $3.00
FSST $5.00
FSTD $1.00
TA1 $1.00
TX1 $0.04
TA2 $2.00
TX2 $0.10
CASH $4.14
Dept. 1 $1.00Item 1 —————————
Taxable 1, F/S—————————————
Dept. 2 $5.00Item 2 —————————
Taxable 2, F/S—————————————
Food stamp $4.00Payment —————————
Cash $2.05
REG 03-04-2000 15:25
C01 MC#01 000130
1 DEPT01 T1 F $1.00
1 DEPT02 T2 F $5.00
FSST $6.00
FSTD $4.00
TA2 $1.00
TX2 $0.05
CASH $2.05
71
Adv
ance
d O
pera
tions
TK-7000/7500 User’s Manual
Mixed food stamp/cash change
Example 1OPERATION RECEIPT
150!2-!3-$J
10-IIIII
The change in food stamp transactions is automatically calculated as cash for amount of $1.00 or less, and asfood stamps for amounts greater than $1.00. In the above example, the total amount of change due is $3.50($3.00 in food stamps and $0.50 in cash).
Example 2OPERATION RECEIPT
2-!J
5-IIIII
Dept. 1 $1.50Item 1 —————————
Taxable 1, F/S—————————————
Dept. 1 $2.00Item 2 —————————
Taxable 1, F/S—————————————
Dept. 4 $3.00Item 3 —————————
Taxable F/S—————————————PaymentFood stamp $10.00
REG 03-04-2000 15:30
C01 MC#01 000131
1 DEPT01 T1 F $1.50
1 DEPT01 T1 F $2.00
1 DEPT04 F $3.00
TL $6.50
FSST $6.50
FSTD $10.00
FSCG $3.00
CG $0.50
Dept. 1 $2.00Item —————————
Taxable 1, F/S—————————————PaymentFood stamp $5.00
REG 03-04-2000 15:35
C01 MC#01 000132
1 DEPT01 T1 F $2.00
TL $2.00
FSST $2.00
FSTD $5.00
FSCG $3.00
72
Advanced Operations
Mixed food stamp/cash change (continued…)
Example 3OPERATION RECEIPT
2-!120!30#J
5-IIIII
When food stamp items are included in a transaction, the amount of change due in cash is applied as a cashamount tendered for cash (nonfood stamp) items. In this example, the $0.30 purchase is automatically deductedfrom the $0.80 cash due in change from the food stamp purchase.
Example 4OPERATION RECEIPT
1-!250!5-#J
5-IIIIIa
The following calculation is performed internally to apply the cash change due on the food stamp transaction tothe balance due of the cash transaction.
Food stamp transaction Cash transaction
Price items: $3.50 $5.00Tax: $0.00 $0.00Total due: $3.50 $5.00Amount tendered: $5.00 (food stamp) $4.50 (cash), $0.50 (change from food stamp)Amount due: $3.50Change amount due: $1.00 (food stamp), $0.50 (cash)Total: $5.00
Dept. 1 $2.00Item 1 —————————
Taxable 1, F/S—————————————
Dept. 1 $1.20Item 2 —————————
Taxable 1, F/S—————————————
Dept. 3 $0.30Item 3 —————————
Taxable 1—————————————PaymentFood stamp $5.00
REG 03-04-2000 15:40
C01 MC#01 000133
1 DEPT01 T1 F $2.00
1 DEPT01 T1 F $1.20
1 DEPT03 T1 $0.30
TA1 $0.30
TX1 $0.01
TL $3.51
FSST $3.20
FSTD $5.00
FSCG $1.00
CG $0.49
Dept. 1 $1.00Item 1 —————————
Taxable 1, F/S—————————————
Dept. 1 $2.50Item 2 —————————
Taxable 1, F/S—————————————
Dept. 3 $5.00Item 3 —————————
Taxable No—————————————
Food stamp $5.00Payment —————————
Cash $4.50
REG 03-04-2000 15:45
C01 MC#01 000134
1 DEPT01 T1 F $1.00
1 DEPT01 T1 F $2.50
1 DEPT03 $5.00
FSST $3.50
FSTD $5.00
FSCG $1.00
CASH $4.50
73
Adv
ance
d O
pera
tions
TK-7000/7500 User’s Manual
Mixed food stamp/cash change (continued…)
Food stamp + Taxable 1 + Taxable 2When food stamps are received as partial tender for items preset with the status “food stamp”, “taxable 1”, and“taxable 2”, the calculation are performed using one of the two cases described in this section. The case useddepends on the food stamp amount received as partial tender.
Case 1This case is used when the total amount of the items preset with the status “food stamp”, “taxable 1”, and“taxable 2” is greater than or equal to the food stamp amount received as partial tender. Case 1 subtracts thefood stamp amount tendered from both the taxable 1 amount and taxable 2 amount.
Example 5OPERATION RECEIPT
2-!3-"T2-!
J
2-IIIIIa
In this example, the food stamp received as partial tender is $2.00, so that amount is deducted from both thetaxable 1 amount and taxable 2 amount. This means that the remaining taxable 1 amount is $2.00, while theremaining taxable 2 amount is $3.00.
Dept. 1 $2.00Item 1 —————————
Taxable 1, F/S—————————————
Dept. 2 $3.00Item 2 —————————
Taxable 2, F/S—————————————
Dept. 1 $2.00Item 3 —————————
Taxable 1/2, F/S—————————————
Food stamp $2.00Payment —————————
Cash $5.23
REG 03-04-2000 15:50
C01 MC#01 000135
1 DEPT01 T1 F $2.00
1 DEPT02 T2 F $3.00
1 DEPT01 T12F $2.00
FSST $7.00
FSTD $2.00
TA1 $2.00
TX1 $0.08
TA2 $3.00
TX2 $0.15
CASH $5.23
74
Advanced Operations
Mixed food stamp/cash change (continued…)
Case 2This case is used when the total amount of the items preset with the status “food stamp”, “taxable 1”, and“taxable 2” is less than or equal to the food stamp amount received as partial tender.
Example 6OPERATION RECEIPT
2-!3-"
T2-!J
4-IIIIIa
Dept. 1 $2.00Item 1 —————————
Taxable 1, F/S—————————————
Dept. 2 $3.00Item 2 —————————
Taxable 2, F/S—————————————
Dept. 1 $2.00Item 3 —————————
Taxable 1/2, F/S—————————————
Food stamp $4.00Payment —————————
Cash $3.05
REG 03-04-2000 15:55
C01 MC#01 000136
1 DEPT01 T1 F $2.00
1 DEPT02 T2 F $3.00
1 DEPT01 T12F $2.00
FSST $7.00
FSTD $4.00
TA2 $1.00
TX2 $0.05
CASH $3.05
75
Adv
ance
d O
pera
tions
TK-7000/7500 User’s Manual
Electronic benefits transferIn addition to standard food stamp tender finalizations, this model also allows finalization for tenders electronicbenefits transfer (EBT) card.EBT tenders can be accepted for New Jersey rule or Illinois rule food stamp tenders, as well as for food stamptenders that do not follow these rules.
About mixed EBT card tendersWhen the register is programmed to prohibit an EBT amount tendered that exceeds the food stamp subtotal,nonfood stamp items cannot be paid for using an EBT card. In this case, the following applies:
• ST – (EBT/TEND – FS/ST) = Balance due (the remaining balance due must be finalized using another finalize key.)When the register is programmed to allow an EBT amount tendered that exceeds the food stamp subtotal,nonfood stamp items can be paid for using an EBT card. In this case, there are two possible situations:
• ST > EBT/TENDST – (EBT/TEND – FS/ST) = Balance due (the remaining balance due must be finalized using another finalize key.)
• EBT/TEND > or = STEBT/TEND – ST = cash change
No change due
Example 1OPERATION RECEIPT
1-!2-"3-#J
6-BBBBB
Dept. 1 $1.00Item 1 —————————
Taxable 1, F/S—————————————
Dept. 2 $2.00Item 2 —————————
Taxable 2, F/S—————————————
Dept. 3 $3.00Item 3 —————————
Taxable F/S—————————————Payment EBT $6.00
REG 03-04-2000 16:00
C01 MC#01 000137
1 DEPT01 T1 F $1.00
1 DEPT02 T2 F $2.00
1 DEPT03 F $2.00
TL $6.00
FSST $6.00
EBTTD $6.00EBT
76
Advanced Operations
Example 2OPERATION RECEIPT
1-!2-"3-#J
5-BBBBBF
Change dueOPERATION RECEIPT
1-!120"30#J
5-BBBBB
Dept. 1 $1.00Item 1 —————————
Taxable 1, F/S—————————————
Dept. 2 $2.00Item 2 —————————
Taxable 1, F/S—————————————
Dept. 3 $3.00Item 3 —————————
Taxable 1—————————————
EBT $5.00Payment —————————
Cash $1.12
REG 03-04-2000 16:05
C01 MC#01 000138
1 DEPT01 T1 F $1.00
1 DEPT02 T1 F $2.00
1 DEPT03 T1 $3.00
FSST $3.00
EBTTD $5.00
TA1 $3.00
TX1 $0.12
CASH $1.12
EBT
Dept. 1 $1.00Item 1 —————————
Taxable 1, F/S—————————————
Dept. 2 $1.20Item 2 —————————
Taxable 1, F/S—————————————
Dept. 3 $0.30Item 3 —————————
Taxable 1—————————————Payment EBT $5.00
REG 03-04-2000 16:10
C01 MC#01 000139
1 DEPT01 T1 F $1.00
1 DEPT02 T1 F $1.20
1 DEPT03 T1 $0.30
TA1 $0.30
TX1 $0.01
TL $2.51
FSST $2.20
EBTTD $5.00
CG $2.49
EBT
TipsExample
OPERATION RECEIPT
3-!5-"s
80BBBBB10-F
Unit price $3.00Item 1 —————————
Dept. 1—————————————
Unit price $5.00Item 2 —————————
Dept. 2—————————————
Tip Amount $0.80—————————————Payment Cash $10.00
REG 03-04-2000 16:15
C01 MC#01 000140
1 DEPT01 •3.00
1 DEPT02 •5.00
TIP •0.80
TL $8.80
CASH $10.00
CG $1.20
TIP
77
Adv
ance
d O
pera
tions
TK-7000/7500 User’s Manual
Inputting the number of customersExample 1
OPERATION RECEIPT
2BBBBB15-!5-"sF
Example 2You can only use the following operation to re-input the number of customers when <CUSTOMER> (customernumber key) is preset to allow re-input. When programming prohibits re-input of the number of customers, thisoperation causes an error.
OPERATION RECEIPT
3BBBBB15-!5-"2BBBBBs
20-F
You can re-input the number of customers either immediately after the initial input or during later registration.
Example 3You can use the following operation to add customers to an original number of customers input (when additionto the number of the customer is allowed).
OPERATION RECEIPT
3BBBBB15-!5-"2BBBBBs
20-F
Unit price $15.00Item 1 —————————
Dept. 1—————————————
Unit price $5.00Item 2 —————————
Dept. 2—————————————Customer Number 2—————————————Payment Cash $20.00
REG 03-04-2000 16:20
C01 MC#01 000141
CT 2
1 DEPT01 •15.00
1 DEPT02 •5.00
TL •20.00
CASH •20.00
CST
CST
CST
REG 03-04-2000 16:30
C01 MC#01 000143
CT 3
1 DEPT01 •15.00
1 DEPT02 •5.00
CT 5
TL •20.00
CASH •20.00
CST
CST
REG 03-04-2000 16:25
C01 MC#01 000142
CT 3
1 DEPT01 •15.00
1 DEPT02 •5.00
CT 2
TL •20.00
CASH •20.00
78
Advanced Operations
Temporarily releasing compulsion<OPEN 2> (open 2 key) can be programmed to release specific compulsion.
Example 1OPERATION RECEIPT
10-!10-k
2-"
BBBBB
Example 2OPERATION RECEIPT
10-!
BBBBB
10-!10-k
Unit price $10.00Item —————————
Dept. 1—————————————Payment Check $10.00—————————————
Validation compulsory
REG 03-04-2000 16:40
C01 MC#01 000145
1 DEPT01 •10.00
TL •10.00
CHECK •10.00
OPEN2
Validation compulsory
Validation compulsoryis temporarily released.
Input customer No. compulsory—————————————
Unit price $10.00Item —————————
Dept. 1—————————————Payment Check $10.00—————————————
OPEN2
Input customer No. compulsory
Compulsory is temporarily released.
Text recallThis procedure is used to recall text by inputting the address where the text is stored. The recalled text isprinted on the receipt and journal.
ExampleOPERATION RECEIPT
46-!1BBBBB
10-"2BBBBBsF
Unit price $46.00Item 1 —————————
Dept. 1—————————————
Unit price $10.00Item 2 —————————
Dept. 2—————————————Payment Cash $56.00—————————————
Text 1 MEDIUM SIZE—————————————
Text 2 SMALL SIZE
REG 03-04-2000 16:35
C01 MC#01 000144
CT 3
1 DEPT01 •46.00
MEDIUM SIZE
1 DEPT02 •10.00
SMALL SIZE
TL •56.00
CASH •56.00
TEXTRECALL
TEXTRECALL
REG 03-04-2000 16:45
C01 MC#01 000146
1 DEPT01 •10.00
TL •10.00
CHECK •10.00
79
Adv
ance
d O
pera
tions
TK-7000/7500 User’s Manual
Printing slipTo perform batch printing on the slip printer, you must first use the memory allocation operation (see program5 mode in the dealer’s manual) to reserve slip buffer memory. The capacity of the slip buffer memory isdetermined by the number of units of slip buffer memory reserved by the memory allocation operation.The register can be programmed to check the status of the registration buffer memory whenever slip batchprinting is performed, and sound an alarm when the buffer memory is almost full. The alarm sounds when thereare 12 lines or less remaining, and once it starts to sound, the only operation you can perform is the canceloperation or operations using one of the following keys.
• <CA/AMT TEND> (cash/amount tendered key) operation• <CH> (charge key) operation• <CHK/TEND> (check tendered key) operation• <DEPOSIT> (deposit key) operation• <NEW BALANCE> (new balance key) operation• <SUBTOTAL> (subtotal key) operation
You must perform one of above operations when the registration buffer alarm sounds. Any other operationsresults in an error.
Printing slipsThe cash register can be connected to the optional SP-1300 slip printer, which features an automatic feedfunction and automatic back feed function.
• Automatic feed functionThis function makes it possible to program the number of line feeds that should be inserted from the normalprint start position before starting slip printing of a new slip. Even if line feeds are programmed for thisfunction, they are not inserted for validation printing, check endorsement printing, and check printingperformed using the slip printer. Note also that line feeds are not inserted automatically at the beginning of asecond slip when the transaction requires printing that extends from one slip to another.
• Automatic back feed functionThis function performs automatic back feed following slip printing, validation printing, and endorsementprinting on the slip printer. The slip paper is released once the back feed operation is complete.
• Manual feed function<SLIP FEED/RELEASE> (slip feed/release key: assigned to the register’s keyboard using the program 4 mode)can be used for manual feed of the slip paper. You perform manual feed by inputting a value for the number oflines (up to two digits in the range of 1 to 99) and then press <SLIP FEED/RELEASE>.
• Manual back feed function<SLIP BACK FEED/RELEASE> (slip back feed/release key: assigned to the register’s keyboard using theprogram 4 mode) can be used for manual back feed of the slip paper. Manual back feed can be performed byinputting a value for the number of lines (up to two digits in the range of 1 to 99) and then press <SLIP BACKFEED/RELEASE>.You can print slips using automatic or manual batch printing. The slip print operation can be performed inREG1, REG2, and RF modes only.Finalizing a registration without inserting a slip paper into the slip printer when the register is programmed as“slip paper insertion into slip printer compulsory before finalizing registration” produces an error.
80
Advanced Operations
Check tracking systemsCheck tracking system
With the check tracking system, the amount, check number, number of slip print lines, store number, date/timeand registration detail data are stored in two files (check tracking index file and check tracking detail file).
• Check tracking detail file and index file are cleared by the following timing:1.The check is cleared after printing finalized data on slip or guest check receipts, or the check is also cleared
when the new or old check operation is made.2.The check is cleared after printing finalized data on slip or guest check receipt, or check is also cleared when
the same finalized check number is assigned in new check operation.You can select one of these options by programming.
• Auto new balance functionThe register can be programmed so that whenever a clerk (by clerk key) signs off while a check is open, a<NEW BALANCE> operation is automatically performed to temporarily finalize the open check.
• You can specify a range of checks that can be opened by each clerk. Once you do, any attempt by a clerk toopen a check using a number that is not within his specified range results in an error.
• Either of the following two operations can be used to correct input of a wrong check number.<NEW CHECK>Re-input the correct check number, or cancel the original check number, issue a receipt, and then re-input thecorrect check number.<OLD CHECK>, <NEW/OLD>Temporary finalize the original check number, issue a receipt, and then re-input the correct check number.
To perform auto batch printing 1
To perform auto batch printing 2
Insert a slip paper into the slip printer. Remove slip paper.
Registration Finalization
Print receipt/journal. Print receipt/journal.Print slip.
Insert a slip paper into the slip printer. Remove slip paper.
Registration/ finalization
Print receipt/journal. Print slip.
SLIPPRINT
About the maximum number of slip linesYou can program the maximum number of lines that can be printed on a slip. Once you do, any attempt toexceed the preset maximum results in an error. When such an error occurs, press <C>, change slip paper andpress <SLIP PRINT> to restart printing.
81
Adv
ance
d O
pera
tions
TK-7000/7500 User’s Manual
Opening a check
ExampleOPERATION RECEIPT
1234BBBBB33BBBBB10-!
!20-"
"30-#
Insert slip
BBBBBRemove slip
Press <NEW BALANCE> to temporarily close the transaction. If you want to finalize a check immediately, use<CASH>, <CHARGE>, <CREDIT> or <CHECK>.
Adding to a check
ExampleOPERATION RECEIPT
1234BBBBB30-!10-"
Insert slip
BBBBBRemove slip
• The table number is stored in the check tracking index memory so its input is not required in this operationeven if table number input is preset as compulsory. Table number input after inputting the check number maybe performed, however, without generating an error.
• Once a check is opened under a number in a certain mode (REG1 or REG2), the same mode must be used tomake additions to the check.
Check# 1234—————————————
Table# 33—————————————
Dept 1 $10.00Item 1 —————————
Quantity 2—————————————
Dept 2 $20.00Item 2 —————————
Quantity 2—————————————
Dept 3 $30.00Item 3 —————————
Quantity 1
REG 03-04-2000 16:50
C01 MC#01 000147
CHECK No.1234
TBL-# 000033
1 DEPT01 •10.00
1 DEPT01 •10.00
1 DEPT02 •20.00
1 DEPT02 •20.00
1 DEPT03 •30.00
+ •0.50
SRVC TL •90.50
NEWCHECK
TABLE#
NB
Check# 1234—————————————
Table# 33—————————————
Dept 1 $30.00Item 1 —————————
Quantity 1—————————————
Dept 2 $10.00Item 2 —————————
Quantity 1
REG 03-04-2000 16:55
C01 MC#01 000148
TABLE No.000033 CT 1
CHECK No.1234
ST •90.50
1 DEPT01 •30.00
1 DEPT02 •10.00
+ •0.50
SRVC TL
•131.00
OLDCHECK
NB
82
Advanced Operations
Issuing a guest receiptThe following operation can be used to print out the balance of a temporarily finalized check.
ExampleOPERATION RECEIPT
1234BBBBB
Closing a check memory
ExampleOPERATION RECEIPT
1234BBBBB150-F
REG 03-04-2000 17:00
C01 MC#01 000149
TABLE No.000033 CT 1
CHECK No. 1234
1 DEPT01 •10.00
1 DEPT01 •10.00
1 DEPT02 •20.00
1 DEPT02 •20.00
1 DEPT03 •30.00
+ •0.50
1 DEPT01 •30.00
1 DEPT02 •10.00
+ •0.50
SRVC TL
•131.00
GUESTRECEIPT
Input the number of check youwant.
OLDCHECK REG 03-04-2000 17:05
C01 MC#01 000150
TABLE No.000033 CT 1
CHECK No.1234
ST •131.00
CASH •150.00
CG •19.00
83
Adv
ance
d O
pera
tions
TK-7000/7500 User’s Manual
SLIP
New/old check key operation
Example 1When a check number is input and <NEW/OLD> is pressed, the key works as a new check key function ifthere is no matching check number in the check tracking memory.
OPERATION RECEIPT
3456BBBBB
10-!20-"
BBBBBExample 2When a check number is input and <NEW/OLD> is pressed, the key works as an old check key if there ismatching check number in the check tracking memory.
OPERATION RECEIPT
3456BBBBB31-F
REG 03-04-2000 17:05
C01 MC#01 000150
TABLE No.000033 CT 1
CHECK No. 1234
1 DEPT01 •10.00
1 DEPT01 •10.00
1 DEPT02 •20.00
1 DEPT02 •20.00
1 DEPT03 •30.00
+ •0.50
#13 SRVC TL •90.50
1 DEPT01 •30.00
1 DEPT02 •10.00
+ •0.50
#17 SRVC TL •131.00
TL •131.00
CASH •150.00
CG •19.00
Input a check number and press<NEW/OLD>.
NEW/OLD
NB
REG 03-04-2000 17:10
C01 MC#01 000151
CHECK No.3456
1 DEPT01 •10.00
1 DEPT02 •20.00
+ •0.50
SRVC TL •30.50
NEW/OLD REG 03-04-2000 17:15
C01 MC#01 000152
CT 1
CHECK No.3456
ST •30.50
TL •30.50
CASH •31.00
CG •0.50
84
Advanced Operations
Add checkThis operation lets you combine the amounts of more than one check into a single check.
Example
Registration for check number 1234OPERATION RECEIPT
1234BBBBB33B
10-!20-"
B
Registration for check number 3456OPERATION RECEIPT
3456BBBBB30-!
B
Registration for check number 1234OPERATION RECEIPT
1234B3456BBBBB
B
Added check
Check# 3456—————————————
Dept 1 $30.00Item —————————
Quantity 1
NEWCHECK
NB
OLDCHECK
NB
ADDCHECK
NEWCHECK
TABLE#
NB
Original check
Check# 1234—————————————
Dept 1 $10.00Item 1 —————————
Quantity 1—————————————
Dept 2 $20.00Item 2 —————————
Quantity 1
Check No. : 1234 Check No. :
3456
REG 03-04-2000 17:20
C01 MC#01 000153
CHECK No.1234
TBL-# 000033
1 DEPT01 •10.00
1 DEPT02 •20.00
+ •0.50
SRVC TL •30.50
REG 03-04-2000 17:25
C01 MC#01 000154
CHECK No.3456
1 DEPT01 •30.00
+ •0.50
SRVC TL •30.50
REG 03-04-2000 17:30
C01 MC#01 000155
TABLE No.000033 CT 1
CHECK No.1234
ST •30.50
ADD CHK 3456
ST •30.50
+ •0.50
SRVC TL •61.50
85
Adv
ance
d O
pera
tions
TK-7000/7500 User’s Manual
Separate checkThis operation makes it possible to split a single check into separate checks.
ExampleOriginal check
Check# 1234—————————————
Dept 1 $10.00Item 1 —————————
Quantity 1—————————————
Dept 2 $20.00Item 2 —————————
Quantity 1—————————————
Dept 3 $30.00Item 3 —————————
Quantity 1—————————————
Dept 4 $40.00Item 4 —————————
Quantity 1
Separated check
Check# 3456—————————————
Dept 1 $10.00Item 1 —————————
Quantity 1—————————————
Dept 3 $30.00Item 2 —————————
Quantity 1—————————————Payment Cash $40.00
NEWCHECK
SEPARATECHECK
This input of a temporary checknumber can be skipped.
After <SEP CHK>, this item isseparated.
SEPARATECHECK
SEPARATECHECK
Display shows the 3rd itemwhich will be separated.
OPERATION RECEIPT
3456B
1234BBBBB
BBBBB
BBBBB
BBBBBBBBBB
40-F
REG 03-04-2000 17:35
C01 MC#01 000156
CHECK No.3456
SEP CHK 1234
1 DEPT01 •10.00
1 DEPT03 •30.00
ST •40.00
CASH •40.00
CG •0.00
Input the original check numberby <SEP CHK>.Display shows the 1st itemwhich will be separated.
NB
REVIEW
86
Advanced Operations
Clerk transferThis operation lets you change the clerk who is in charge of a specific open check number.
ExampleTo change the clerk for check number 1234 from clerk 1 to clerk number 4.
OPERATION RECEIPT
o
1BBBBB
4B
1234B
BBBBBTable transfer
With this operation, you can change the number of a check.
Example 1To change the check number 1234 to 1111 (which is newly opened).
OPERATION RECEIPT
1234B10-!1111BBBBB
Example 2To change the check number 3456 to 2222 (which has already been opened).
OPERATION RECEIPT
3456B10-!2222BBBBB
Input the new check No.
NEWCHECK
Press this key if you do not want the clerk No.or clerk secret No. to appear on the display.
Input the clerk No. of the clerk who is currently incharge of check No. 1234 (target check).
Input the clerk No. of the clerk who will take overcheck No. 1234 (target check).
Input the target check No. that is transferred from clerk 1 to 4.You can use either <OLD CHK>, <NEW/OLD>.Note that if you skip this step, all check Nos currently assignedto clerk 1 are transferred to clerk 4.
NEWCHECK
OPE#
CLKTRANS
CLKTRANS
REG 03-04-2000 17:40
C01 MC#01 000157
CLK TRANS
C01 C04
1234 •60.50
------------------------
TL •60.50
— Check No./NB amount
Check No: 1234
Check No: 1234
Check No: 1111
1111 <CHK TRN> CHECKTRANS
REG 03-04-2000 17:45
C01 MC#01 000158
CHECK No.1234
1 DEPT01 •10.00
ST •10.00
TBL TRANS 1111
SRVC TL •10.00
Check No: 3456
Check No: 2222
Check No: 3456
Check No: 2222
Added
1111 <CHK TRN>
OLDCHECK
CHECKTRANS
REG 03-04-2000 17:50
C01 MC#01 000159
CHECK No.3456
ST •10.00
1 DEPT01 •10.00
TBL TRANS 2222
SRVC TL •30.00
87
Adv
ance
d O
pera
tions
TK-7000/7500 User’s Manual
Price reductions (red price)You can use the reduced price function to change a price; generally to an amount that is less than the normalprice. You can program the register so that it prints the normal price, and the difference between the two priceson the receipt, while on journal, these items are always printed.The following functions are able to work with red price.
• Department and PLU• Quantity extension (Preset price is required for both department and PLU.)• Amount limitation of item program (It effects to new price.)
Note that you cannot use red price with the following types of item.• Department and PLUs programmed with negative unit prices• Set menus and link PLUs• Second unit prices• Multiplication operations that use the format: Amount × Quantity
Example 1OPERATION RECEIPT
4-BBBBB
6-!F
Example 2OPERATION RECEIPT
3X2-BBBBB
1+F
• The model for the U.S./Canada, use x instead of X.
REG 03-04-2000 17:55
C01 MC#01 000160
RED •6.00
RED PRC -2.00
1 DEPT01 *4.00
TL •4.00
CASH •4.00
Input a reduced price.Dept 1 $6.00
Item —————————Red price $4.00
—————————————Payment Cash $4.00
REDPRICE
Input a reduced price.
PLU 1 $4.00Item —————————
Red price $2.00—————————————Payment Cash $6.00
REDPRICE
REG 03-04-2000 18:00
C01 MC#01 000161
RED •6.00
RED PRC -4.00
3 PLU0001 *6.00
TL •6.00
CASH •6.00
— Old price
— Reduced price
— New price (Differencebetween two prices)
88
Advanced Operations
Condiment/preparation PLUsYou can force entering condiment or preparation PLU after the main PLU registration by programming.
Example (condiment PLU)OPERATION RECEIPT
1+
11+++++12+++++13+++++F
Example (preparation PLU)OPERATION RECEIPT
20+
21+++++22+++++23+++++F
REG 03-04-2000 18:05
C01 MC#01 000162
1 PLU0001 •10.00
PLU0011 •0.10
PLU0012 •0.20
PLU0013 •0.30
TL •10.60
CASH •10.60
Registering main PLU.No condiment registrationoccurs an error condition.
Main item PLU 1 $10.00—————————————
PLU 11 $0.10—————————
Condiment PLU 12 $0.20—————————
PLU 13 $0.30—————————————Payment Cash $10.60
REG 03-04-2000 18:10
C01 MC#01 000163
1 PLU0020 •20.00
PLU0021
PLU0022
PLU0023
TL •20.00
CASH •20.00
Registering main PLU.
Main item PLU 20 $20.00—————————————
PLU 21 $0.00—————————
Preparation PLU 22 $0.00—————————
PLU 23 $0.00—————————————Payment Cash $20.00
89
Adv
ance
d O
pera
tions
TK-7000/7500 User’s Manual
Deposit registrationsUse the following procedures to register deposits.
Deposit from customerOPERATION RECEIPT
50-BBBBBF
Deposit from customer during sales transactionOPERATION RECEIPT
10-!20-"20-BBBBB
F
DEPOSIT–
DEPOSIT+
REG 03-04-2000 18:20
C01 MC#01 000165
DEPO- •50.00
TL •50.00
CASH •50.00
Deposit Cash $50.00
REG 03-04-2000 18:25
C01 MC#01 000166
1 DEPT01 •10.00
1 DEPT02 •20.00
DEPO+ -20.00
TL •10.00
CASH •10.00
Dept 1 $10.00Items —————————
Dept 2 $20.00—————————————Deposit $20.00
—————————————Payment Cash $10.00
VAT breakdown printingYou can force printing of the VAT breakdown at the finalize stage, regardless of whether the cash register isprogrammed to print or skip printing of the VAT breakdown.Every time you want to have VAT breakdown, press <VAT>.
ExampleOPERATION RECEIPT
1-!2+VVVVVF
REG 03-04-2000 18:15
C01 MC#01 000164
1 DEPT01 T1 •1.00
1 PLU0001 T2 •2.00
TA1 •0.90
TX1 •0.10
TA2 •1.90
TX2 •0.10
TL •3.00
CASH •3.00
Dept 1 $1.00Item 1 —————————
Taxable 1—————————————
PLU 1 ($2.00)Item 2 —————————
Taxable 2—————————————Payment Cash $3.00
90
Advanced Operations
Bill copyExample 1To issue a copy of a bill dated February 1, 2000 in the amount of $35.00 cash.
OPERATION RECEIPT
02012000BBBBB
35-F
Note that you can finalize this operation using the cash amount tendered key.
Example 2To issue a copy of a bill dated February 1, 2000 in the amount of Euro 30.00 cash (sub-currency).
OPERATION RECEIPT
02012000BBBBBq
30-F
Enter date by date order.
BILLCOPY * BILL TOP MESSAGE 1 *
* BILL TOP MESSAGE 2 *
* BILL TOP MESSAGE 3 *
* BILL TOP MESSAGE 4 *
REG 02-01-2000
C01 MC#01
* BILL COPY MESSAGE 1 *
* BILL COPY MESSAGE 2 *
* BILL COPY MESSAGE 3 *
* BILL COPY MESSAGE 4 *
TA1 •35.00
TX1 •3.50
TL •38.50
CASH •38.50
* BILL BTM MESSAGE 1 *
* BILL BTM MESSAGE 2 *
* BILL BTM MESSAGE 3 *
* BILL BTM MESSAGE 4 *
BILLCOPY * BILL TOP MESSAGE 1 *
* BILL TOP MESSAGE 2 *
* BILL TOP MESSAGE 3 *
* BILL TOP MESSAGE 4 *
REG 02-01-2000
C01 MC#01
* BILL COPY MESSAGE 1 *
* BILL COPY MESSAGE 2 *
* BILL COPY MESSAGE 3 *
* BILL COPY MESSAGE 4 *
TA1 ⁄27.28
TX1 ⁄2.72
TL ⁄30.00
CASH ⁄30.00
* BILL BTM MESSAGE 1 *
* BILL BTM MESSAGE 2 *
* BILL BTM MESSAGE 3 *
* BILL BTM MESSAGE 4 *
— Bill top message *1
— Bill copy message *1
— Add-on tax amount
— Bill bottom message *1
*1 Programmable option
— Bill top message *1
— Bill copy message *1
— Add-in tax amount
— Bill bottom message *1
*1 Programmable option
91
Adv
ance
d O
pera
tions
TK-7000/7500 User’s Manual
STOCKINQ
STOCKINQ
PRICEINQ
PRICEINQ
PRICEINQ
Actual stock quantity inquiryWith this operation, you can recall the actual stock quantity for PLUs and show it on the display of the cashregister.
ExampleTo check the actual stock quantity of PLU 32 and flat-PLU 001.
OPERATION DISPLAY (7segment)
BBBBB32+ 12#45
BBBBB( 1
Unit price inquiryUse this operation to recall the unit prices of departments, PLUs, second unit price of PLUs, or scanning PLUs.The unit prices appear on the display of the cash register when recalled.
ExampleTo check the unit price of PLU 32, flat-PLU 001, department 1.
OPERATION DISPLAY (7 segment)
BBBBB32+ !45
BBBBB( #00
BBBBB! 1$00
Actual stock quantity are appeared.
92
Advanced Operations
Previous item void using <REVIEW>You can correct the previously registered item(s) in the same transaction by using <REVIEW> (review key).
ExampleOPERATION DISPLAY
1 ST •2.35DEPT01
235! "35
2 ST •4.35DEPT02
2-" "00
3 ST •5.55PLU001
1+ !20
** REVIEW **DEPT01 1 QT
BBBBB "35
2 ST •3.20DEPT01
BBBBB -----"35
CASH
F #20
RECEIPT
#20
Dept. 1 $2.35Item 1 —————————
Quantity 1—————————————
Dept. 2 $2.00Item 2 —————————
Quantity 1—————————————
PLU 1 ($1.20)preset
Item 3 —————————Quantity 1
—————————————
Corrected Dept. 1 $2.35—————————
Item 1 Quantity 1—————————————Payment Cash $3.20 REVIEW
Review the item to be corrected.
VOID
Press <VOID> to correct.
REG 03-04-2000 18:40
C01 MC#01 000169
1 DEPT01 •2.35
1 DEPT02 •2.00
1 PLU0001 •1.20
VOID ••••••••••••
1 DEPT01 -2.35
TL •3.20
CASH •3.20
93
Adv
ance
d O
pera
tions
TK-7000/7500 User’s Manual
Scanning PLUProduct barcodes are read by scanning with hand-held scanner, and are filed in the scanning PLU file togetherwith the unit price, item descriptor, programming status, link department, totalizer and counter.When a barcode is entered by scanning, or from the keyboard by using <OBR> (OBR key) or <One touchNLU> (One touch NLU key) and it has been filed in the scanning PLU file, the preset unit price is accumulatedto its own totalizer and other appropriate totalizers.Scanning PLUs include UPC-A/UPC-E/EAN-13/EAN-8, source marking, in-store marking code.
Item registration
By scanner/code input/one touch NLU keyOPERATION RECEIPT
“Scanning”
123456BBBBB
BBBBB
FNot found PLU
When a scanning PLU item which does not exist in the scanning PLU file is registered, an error occurs (Itemnot found error). In this case, you can input this item to the ECR and register it at the same time. After thisoperation, “Item not found error” does not occur during the next registration.
OPERATION RECEIPT
“Scanning”
“Not Found Error”
100!
“Scanning”
F
After daily operation, a “Not found PLU maintenance” is necessary to merge not found PLU(s) into thescanning PLU file. Please consult with your dealer in detail.
Scan-PLU ($2.35)Item 1 —————————(scan) PLU code 49012347
—————————————Scan-PLU ($2.00)
Item 2 —————————(code) PLU code 123456
—————————————Scan-PLU ($1.23)
Item 3 —————————(OTN) PLU code 49012354
—————————————Payment Cash $5.58
Scanning-PLU code andOBR key
OBR
NLU
One touch NLU
REG 03-04-2000 18:45
C01 MC#01 000170
1 Scan-PLU01 •2.34
#49012347
1 Scan-PLU02 •2.00
#123456
1 Scan-PLU03 •1.23
#49012354
TL •5.58
CASH •5.58
— Scanning PLU code *1
*1 Programmable option
Scan-PLU ($1.00)—————————
Item 1 PLU code 49012361(scan) —————————
Dept. 1—————————————
Scan-PLU ($1.00)Item 2 —————————(scan) PLU code 49012361
—————————————Payment Cash $2.00
Does not exist in the scanningPLU file
Input price and press the linkeddepartment key.
Register normally.
REG 03-04-2000 18:50
C01 MC#01 000171
1 DEPT01 •1.00
#49012361
1 DEPT01 •1.00
#49012361
TL •2.00
CASH •2.00
— Link department
descriptor/amount
94
Advanced Operations
Programming to clerkYou can program up to 4-digit assigning number (clerk number), trainee status of clerk (i.e. training cashier)and commission rate for each clerk.
Programming clerk number
6 3s 6 { } 07s 6 : : : : a 6 s
Clerk number
To other clerk
Rec. No.1
:15Mode switch
PGM
Programming trainee status
Programming commission rate
63s6{ }07s667s6 : 0~0a6sD6
Trainee status: • Normal clerk = 0 • Training clerk = 1
To other clerk
To the next clerkRec. No.1
:15Mode switch
PGM
63s6{ }07s668s 6 : ~ : a6sD8 ~ D1
Commission rate
To other clerk
To the next clerkRec. No.1
:15Mode switch
PGM
droceR.oN
rebmunkrelCeeniarT
sutats
etarnoissimmoC1etarnoissimmoC 2etarnoissimmoC
regetnI lamiceD regetnI lamiceDD4 D3 D2 D1 D6 00000 D8 D7 D6 D5 D4 D3 D2 D1
1 00000
2 00000
3 00000
4 00000
5 00000
6 00000
7 00000
8 00000
41 00000
51 00000
95
Adv
ance
d O
pera
tions
TK-7000/7500 User’s Manual
6 2s 6 : : : : s 6 Characters 6 a 6 sAddress code
☞ See “Entering characters” section.
To other address code
To the next address code
Mode switch
PGM
Character programming can be performed in two ways:• Character keyboard programming (see page 99),
or• Entering characters by code (see page 100).
Programming descriptors and messagesThe following descriptors and messages can be programmed;• Messages (Logo, commercial and bottom message)• Clerk name• PLU item descriptor• Department key descriptor• Machine number
Programming receipt message and clerk name
Addresscode
Contents Initial character Yours
Clerk 01
Clerk 02
Clerk 03
Clerk 04
Clerk 05
Clerk 06
Clerk 07
Clerk 08
Clerk 14
Clerk 15
C01
C02
C03
C04
C05
C06
C07
C08
C14
C15
0107
0207
0307
0407
0507
0607
0707
0807
1407
1507
sserddAedoc stnetnoC retcarahclaitinI
rebmunenihcaM
1910 rebmunenihcaM 10#CM
Machine number
Up to 8 characters can be set.
96
Advanced Operations
sserddAedoc stnetnoC retcarahclaitinI sruoY
2310 egassemogolfoenilts1
2320 egassemogolfoenildn2
2330 egassemogolfoenildr3
2340 egassemogolfoenilht4
2350 egassemlaicremmocfoenilts1
2360 egassemlaicremmocfoenildn2
2370 egassemlaicremmocfoenildr3
2380 egassemlaicremmocfoenilht4
2390 egassemmottobfoenilts1
2301 egassemmottobfoenildn2
2311 egassemmottobfoenildr3
2321 egassemmottobfoenilht4
2331 egassempotllibfoenilts1
2341 egassempotllibfoenildn2
2351 egassempotllibfoenildr3
2361 egassempotllibfoenilht4
2371 egassemypocllibfoenilts1
2381 egassemypocllibfoenildn2
2391 egassemypocllibfoenildr3
2302 egassemypocllibfoenilht4
2312 egassemmottobllibfoenilts1
2322 egassemmottobllibfoenildn2
2332 egassemmottobllibfoenildr3
2342 egassemmottobllibfoenilht4
2352 egassemtpiecertsoP
2362 .gsmetaidemretnitseugfoenilts1
2372 .gsmetaidemretnitseugfoenildn2
2382 .gsmetaidemretnitseugfoenildr3
2392 .gsmetaidemretnitseugfoenilht4
2303 .gsmmottobtseugfoenilts1
2313 .gsmmottobtseugfoenildn2
2323 .gsmmottobtseugfoenildr3
2333 .gsmmottobtseugfoenilht4
2343 .gsmmottobtseugfoenilht5
2353 .gsmmottobtseugfoenilht6
2363 .gsmmottobtseugfoenilht7
2373 .gsmmottobtseugfoenilht8
2383 .gsmmottobtseugfoenilht9
2393 .gsmmottobtseugfoenilht01
YOUR RECEIPT
THANK YOU
CALL AGAIN
97
Adv
ance
d O
pera
tions
TK-7000/7500 User’s Manual
6 2s 6 Characters 6 6 s☞ See “Entering characters” section.
To another department/transaction key
Mode switch
PGMDepartment key
Transaction key
stnetnoC retcarahclaitinI sruoY10tnemtrapeD 10TPED
20tnemtrapeD 20TPED
30tnemtrapeD 30TPED
40tnemtrapeD 40TPED
50tnemtrapeD 50TPED
60tnemtrapeD 60TPED
70tnemtrapeD 70TPED
Programming department/transaction key descriptor
stnetnoC retcarahclaitinI sruoYderednettnuomA/hsaC HSAC
egrahC EGRAHC
kcehC KCEHC
1tiderC 1TIDERC
2tiderC 2TIDERC
naoL NAOL
tnuoccanodevieceR CR
tuodiaP DP
pukciP PU.P
suniM -
tnuocsiD -%
dnufeR FR
noitcerroC RROC
noitadilaV DLV
tpieceR TCR
elasoN/ddanoN SN/#
TAV TAV
1tfihsxaT 1S/T
2tfihsxaT 2S/T
nepO NEPO
rebmunkrelC #KLC
latotbuS LATOTBUS
ffo/notpieceR FFO/NOTCR
emitetaD/noitacilpitluM X
emitetaD/rof/noitacilpitluM TQ
orezowT 00
tnioplamiceD .
egnahcaideM GHCAIDEM
98
Advanced Operations
6 2s 6 Characters 6 B 6 flat-PLU key 6 s☞ See “Entering characters” section.
Use B to program to 2nd ~ 6th flat-PLU key.
To another flat-PLU key
Mode switch
PGM MENU
MENU
.oNULP stnetnoC retcarahclaitinI sruoY
ULP
100 100ULP 1000ULP
200 200ULP 2000ULP
300 300ULP 3000ULP
400 400ULP 4000ULP
500 500ULP 5000ULP
600 600ULP 6000ULP
700 700ULP 7000ULP
800 800ULP 8000ULP
900 900ULP 9000ULP
010 010ULP 0100ULP
110 110ULP 1100ULP
210 210ULP 2100ULP
310 310ULP 3100ULP
410 410ULP 4100ULP
510 510ULP 5100ULP
610 610ULP 6100ULP
710 710ULP 7100ULP
810 810ULP 8100ULP
910 910ULP 9100ULP
020 020ULP 0200ULP
120 120ULP 1200ULP
220 220ULP 2200ULP
320 320ULP 3200ULP
420 420ULP 4200ULP
520 520ULP 5200ULP
620 620ULP 6200ULP
720 720ULP 7200ULP
820 820ULP 8200ULP
920 920ULP 9200ULP
030 030ULP 0300ULP
130 130ULP 1300ULP
Programming flat-PLU descriptor
99
Adv
ance
d O
pera
tions
TK-7000/7500 User’s Manual
1 Shift keyPressing this key shifts the characterfrom the uppercase letter to lowercase letter and returns to the upper-case letter in sequence.
2 Left cursor keyShifts the character setting positionto the left one by one, and used tocorrect already entered characters.
3 Right cursor keyShifts the character setting positionto the right one by one, and used tocorrect already entered characters.
4 Double size letter keySpecifies that the next character youinput to a double size character.You must press this key before eachdouble size character.
5 Space keySets a space by depression.
6 CAP keyShifts the character to the upper caseletter.
7 Alphabet keysUsed input to characters.
8 Numeric keysUsed to enter program codes,memory number and character codes.
9 Character fixed keyEnter when the alphabetic entry for adescriptor, name or message hasbeen completed.
0 Backspace/Character code fixed keyRegisters one character with code (2or 3 digit).Clears the last input character, muchlike a back space key. (Does notclear the double size letter key entry.)
Entering charactersIn this section, the method to enter descriptors or messages (characters) to the cash register duringprogramming is described.Characters are specified by character keyboard or by codes. In the first half of this section, the usage ofcharacter keyboard is described. In the latter half, inputting method by character code is described.
Using character keyboard
Example:Input “ A p p l e J u i c e ”,enter “DBL”“A” “SHIFT”“p” “p” “l” “e” “SPACE” “CAP”“J” “SHIFT”“u” “i” “c” “e” - .
009 018 027 036 045 054 063 072 081 090 099 108
008 017 026 035 044 053 062 071 080 089 098 107
007 016 025 034 043 052 061 070 079 088 097 106
006 015 024 033 042 051 060 069 078 087 096 105
005 014 023 032 041 050 059 068 077 086 095 104
004 013 022 031 040 049 058 067 076 085 094 103
003 012 021 030 039 048 057 066 075 084 093 102
002 011 020 029 038 047 056 065 074 083 092 101
001 010 019 028 037 046 055 064 073 082 091 100
Â
Á
À
Ä
1
Q
A
Z
â
á
à
ä
!
q
a
z
Ô
Ó
Ò
Ö
2
W
S
X
ô
ó
ò
ö
@
w
s
x
Û
Ú
Ù
Ü
3
E
D
C
û
ú
ù
ü
#
e
d
c
Î
Í
Ì
Ï
4
R
F
V
Ê
É
È
Ë
5
T
G
B
ê
é
è
ë
%
t
g
b
Ç
Å
Æ
Ñ
6
Y
H
N
ç
å
æ
ñ
^
y
h
n
Ã
Y
Õ
7
U
J
M
ã
y
õ
&
u
j
m
Ø
<<
8
I
K
,
ø
ÿ
¢
*
i
k
<
£
ª
>>
9
O
L
.
ƒ
ß
-
[
'
\
¿
¡
±
=
]
`
•
î
í
ì
ï
$
r
f
v
'
)
p
:
?
_
_
{
"
+
}
~
¥
¬
¤
(
o
l
>
º
0
P
;
/
CAP SHIFT DBLOVR /INS
C
7 8 9
4 5 6
1 2 3
0 00 •
RECEIPT JOURNALFEED FEED
#-2
#-1
<— —>
1
8
69 0 B
2 3
A
7
5 4C
RECEIPT JOURNALFEED FEED
C
7 8 9
4 5 6
1 2 3
0 00 •
<— —>
#-2
#-1
Á
À
Ä
1
Q
A
Z
á
à
ä
!
q
a
z
Ó
Ò
Ö
2
W
S
X
ó
ò
ö
@
w
s
x
Û
Ú
Ù
Ü
3
E
D
C
û
ú
ù
ü
#
e
d
c
Î
Í
Ì
Ï
4
R
F
V
Ê
É
È
Ë
5
T
G
B
ê
é
è
ë
%
t
g
b
Ç
Å
Æ
Ñ
6
Y
H
N
ç
å
æ
ñ
^
y
h
n
Ã
Y
Õ
7
U
J
M
ã
y
õ
&
u
j
m
Ø
<<
8
I
K
,
ø
ÿ
¢
*
i
k
<
£
ª
>>
9
O
L
.
Â
ß
ƒ
-
[
'
\
Ô
¡
±
¿
=
]
`
•
î
í
ì
ï
$
r
f
v
'
)
p
:
?
â
_
_
{
"
ô
+
}
~
¥
¬
¤
(
o
l
>
º
0
P
;
/
CAP SHIFT DBL
025 034 043 052 061 070 079 088 097 106
008 016 024 033 042 051 060 069 078 087 096 105
007 015 023 032 041 050 059 068 077 086 095 104
006 014 022 031 040 049 058 067 076 085 094 103
005 013 021 030 039 048 057 066 075 084 093 102
004 012 020 029 038 047 056 065 074 083 092 101
003 011 019 028 037 046 055 064 073 082 091 100
002 010 018 027 036 045 054 063 072 081 090 099
001 009 017 026 035 044 053 062 071 080 089 098
OVR /INS
1 5
8
4C 9 06
2
A
B
37
TK-7000
TK-7500
A Program end keyTerminates the character program-ming.
B Character enter keyRegisters the programmedcharacters.
C Insert/Override keyPress this key to change the status“Insert” between the originalcharacters or “Override” the originalcharacters.
100
Advanced Operations
0 @ P p
! 1 A Q a q
" 2 B R b r
# 3 C S c s
$ 4 D T d t
% 5 E U e u
& 6 F V f v
' 7 G W g w
( 8 H X h x
) 9 I Y i y
* : J Z j z
+ ; K [ k {
, < L \ l |
- = M ] m }
. > N ̂ n ~
/ ? O _ o
Ç
ü
é
â
ä
à
å
ç
ê
ë
è
ï
î
ì
Ä
Å
É á Ó
æ í ß
Æ ó Ê Ô
ô ú Ë Ò
ö ñ È õ ¶
ò Ñ Á ⁄ Õ §
û ª Â ã Í µ
ù º À Ã Î
ÿ ¿ © Ï
Ö ® Ú ¨
Ü Û •
ø Ù Ù
£
Ø ¡ ¢ «
Ü « ¥ Ì
ƒ » ¤ Doublesize
Chara Code Chara Code Chara Code Chara Code Chara Code Chara Code
Space 32 48 64 80 96 112
33 49 65 81 97 113
34 50 66 82 98 114
35 51 67 83 99 115
36 52 68 84 100 116
37 53 69 85 101 117
38 54 70 86 102 118
39 55 71 87 103 119
40 56 72 88 104 120
41 57 73 89 105 121
42 58 74 90 106 122
43 59 75 91 107 123
44 60 76 92 108 124
45 61 77 93 109 125
46 62 78 94 110 126
47 63 79 95 111 127
Chara Code Chara Code Chara Code Chara Code Chara Code Chara Code Chara Code
144 160 176 192 208 224 240
145 161 177 193 209 225 241
146 162 178 194 210 226 242
147 163 179 195 211 227 243
148 164 180 196 212 228 244
149 165 181 197 213 229 245
150 166 182 198 214 230 246
151 167 183 199 215 231 247
152 168 184 200 216 232 248
153 169 185 201 217 233 249
154 170 186 202 218 234 250
155 171 187 203 219 235 251
156 172 188 204 220 236 252
157 173 189 205 221 237 253
158 174 190 206 222 238 254
159 175 191 207 223 239 255
Chara Code
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
Entering characters by codeEvery time you enter a character, choose character codes by the character code list (below) and press the ^key to settle it. After you complete entering characters, press the - key to fix them.
Example:
Input “ A p p l e J u i c e ”,
enter “ 255̂ 65̂ 112̂ 112̂ 108̂ 101̂ 32̂ 74̂ 117̂ 105̂ 99̂ 101̂ - ”
Character code list
101
Adv
ance
d O
pera
tions
TK-7000/7500 User’s Manual
Editing characters
Correcting a character just enteredOPERATION DISPLAY (dot)
“L” “E” “N” “O” “N” 1Enter LENON, instead of LEMON.
yyy 1Press left arrow key three times.
B 1Override mode
“M” 1Enter “M”.
Correcting and adding a PLU descriptor already setOPERATION DISPLAY (dot)
- 1Enter “00”.
15+ 1Enter PLU No.
“S” “o” “d” “a” “ ” 1Enter “Soda” and “space”.
B 1Override mode
“L” 1Enter “L”.
Correcting a key descriptor already setOPERATION DISPLAY (dot)
- 1Enter “00”.
! 1Designate an appropriate key.
uu 1Press right arrow key two times.
“M” 1Enter “M”.
^ 1Delete “N”.
Correcting a message descriptor already setOPERATION DISPLAY (dot)
0101s 1Enter record and file number.
uu 1Press right arrow key two times.
“O” 1Enter “O”.
^ 1Delete “A”.
A
A
* A
* A
LENON
LENON
LENON
LEMON
“*” means “OVR” mode.
A
a
* a
* A
lemon
Soda lemon
Soda lemon
Soda Lemon
A
A
A
A
LENON
LENON
LEMNON
LEMON
A
A
A
A
GRASS
GRASS
GROASS
GROSS
INS/OVR
INS/OVR
102
Advanced Operations
8
8
s
After you finish to select items, press s to terminate.
Mode switch
X1
• Specifying a department
!, ", #~
• Specifying a PLU
1+ ~
• Specifying a flat-PLU (, ) ~
Printing read/reset reports• Daily sales read report (“X1” mode)
You can print read reports at any time during the business day without affecting the data stored in the cashregister's memory.
• Daily sales reset report (“Z1” mode)You should print reset reports at the end of the business day.
Important!• The reset operation issues a report and also clears all sales data from the cash register's memory.
• Be sure to perform the reset operations at the end of each business day. Otherwise, you will not beable to distinguish between the sales data for different dates.
To print the individual department, PLU/flat-PLU read reportThis report shows sales for specific departments or PLUs/flat-PLUs.
OPERATION REPORT
X 03-04-2000 19:00
C01 MC#01 000532
X INDIVIDUAL
DEPT01 38
8.13% •257.53
OLD PRC •2.21
RED PRC •4.18
DISCOUNT •5.80
PLU0001 17
0.53% •17.00
OLD PRC •0.00
RED PRC •2.18
DISCOUNT •2.50
#000001
#000123 17
------------------------
TL 88.61
•516.10
RED PRC •12.18
DISCOUNT •9.50
— Mode/date/time
— Clerk/Mc No./consecutive No.
— Read symbol/report title
— Department Name/No. of items
— Sales ratio/amount
— Old price amount
— Red price amount
— Discount amount
— PLU Name/No. of items
— Sales ratio/PLU amount
— Old price amount
— Red price amount
— Discount amount
— PLU random code
— Total No. of items
— Total amount
— Red amount total
— Discount amount total
103
Adv
ance
d O
pera
tions
TK-7000/7500 User’s Manual
To print the financial read reportThis report shows gross sales, net sales, cash in drawer and check in drawer.
OPERATION REPORT
X FLASH
0000071
DECLA •6,919.04
•0.00
EURO money ⁄187.67
-10.87
GRS 111.15
•7,054.14
NET No 120
•7,263.20
CAID •6,919.04
CAID2 ⁄178.60
FSID •172.85
EBTTL •6.00
— Read symbol/report title
— Command code
— Declared cash in drawer of main currency *1
— Difference (= declared - accumulated) *1
— Declared cash in drawer of sub currency *1
— Difference (= declared - accumulated) *1
— Gross No. of items
— Gross amount
— Net No. of customers
— Net amount
— Cash in drawer of main currency
— Cash in drawer of sub currency
— Food stamp in drawer
— EBT in drawer
8
8
Mode switch
X1
Money declaration *1
• Main currency: (Cash in drawer amount b, N or n)
• Sub currency: (q cash in drawer amount b, N or n)
x or X
To print the individual clerk read/reset reportThis report shows individual clerk totals.
OPERATION REPORT
8
820017a
8
: : : : a
8
sAfter you finish to select clerks, press s to terminate.
Enter the appricable clerk number.
Mode switch
X1/Z1(read/reset)
Money declaration *1
• Main currency: (Cash in drawer amount b, N or n)• Sub currency: (q cash in drawer amount b, N or n)
Z CASHIER 0001
0020017
DECLA •6,919.04
•0.00
EURO money ⁄187.67
-10.87
C01 ............1
GROSS 421.25
•2,872.28
NET No 111
•1,845.35
CAID •1,057.14
CHID •139.04
RF No 1
•1.00
CLEAR No 5
•4.43
C02 ............1
— Read symbol/report title/reset counter
— Command code
— Declared cash in drawer of main currency *1
— Difference (= declared - accumulated) *1
— Declared cash in drawer of sub currency *1
— Difference (= declared - accumulated) *1
— Clerk name/drawer No.
— Gross total
— Net total
— Cash in drawer
— Refund mode
— Clear key count
— Clerk name/drawer No.
*1 Money declaration:Count how much cash is in the drawer and input this amount (up to 10 digits).The cash register will automatically compare the input with the cash in drawer in the memory and print thedifference between these two amounts.Note that if money declaration is required by programming, you cannot skip this procedure.
104
Advanced Operations
8
8F
Mode switch
X1/Z1(read/reset)
Money declaration *1
• Main currency: (Cash in drawer amount b, N or n)
• Sub currency: (q cash in drawer amount b, N or n)
To print the daily sales read/reset reportThis report shows sales except for PLUs.
OPERATION REPORT
------------------------
Z BATCH01
------------------------
Z FIX 0001
0001011
DECLA •6,919.04
•0.00
EURO money ⁄187.67
-10.87
GROSS 981.25
•6,574.40
NET No 111
•7,057.14
CAID •6,919.04
CHID •139.04
CKID •859.85
CRID(1) •709.85
------------------------
RF No 3
•10.22
CUST CT 111
AVRG •63.57
DC •1.22
REF •2.42
CLEAR No 85
ROUND •0.00
CANCEL No 2
•12.97
------------------------
TA1 •2,369.69
TX1 •128.86
TA2 •2,172.96
TX2 •217.33
------------------------
GT1 •00000000125478.96
GT2 •00000000346284.23
GT3 •00000000123212.75
------------------------
Z TRANS 0001
— Report title
— Fixed total report title/reset counter *4
— Report code
— Declared cash in drawer of main currency *1
— Difference (= declared - accumulated) *1
— Declared cash in drawer of sub currency *1
— Difference (= declared - accumulated) *1
— Gross total *3
— Net total *3
— Cash in drawer *3
— Charge in drawer *3
— Check in drawer *3
— Credit in drawer *3
— Refund mode *3
— Customer number *3
— Average sales per customer *3
— Discount total *3
— Refund key *3
— Clear key count *3
— Rounding total *3
— Cancellation *3
— Taxable 1 amount *3
— Tax 1 amount *3
— Taxable 2 amount *3
— Tax 2 amount *3
— Grand total 1 *3
— Grand total 2 *3
— Grand total 3 *3
— Function key report title/reset counter
105
Adv
ance
d O
pera
tions
TK-7000/7500 User’s Manual
*1 Money declaration:Count how much cash is in the drawer and input this amount (up to 10 digits).The cash register will automatically compare the input with the cash in drawer in the memory and print thedifference between these two amounts.Note that if money declaration is required by programming, you cannot skip this procedure.
*2 Zero totalled departments/functions (the amount and item numbers are both zero) are not printed.*3 These items can be skipped by programming.*4 The “*” symbol is printed on the reset report, memory overflow occurred in the counter/totalizer.
0001012
CASH No 362
•1,638.04
CH No 56
•1,174.85
RC No 4
•810.00
PD No 5
•520.00
•5.00
CORR No 14
•39.55
VLD No 19
RCT No 3
NS No 5
------------------------
Z DEPT 0001
0001015
DEPT01 38
8.13% •257.53
OLD PRC •2.21
RED PRC •4.18
DISCOUNT •5.80
DEPT02 183
•1,362.26
RED PRC •123.21
DISCOUNT •17.22
------------------------
TL 88.61
•1,916.10
RED PRC •12.18
DISCOUNT •9.50
------------------------
Z CASHIER 0001
0001017
C01 ...........1
GROSS 421.25
•2,872.28
NET No 111
•1,845.35
CAID •1,057.14
CHID •139.04
— Report code
— Function key count/amount *2
— Department report title/reset counter
— Report code
— Department name/No. of items *2
— Sales ratio/amount *2
— Old price amount *2
— Red price amount *2
— Discount amount *2
— Total No. of items
— Total amount
— Red amount total
— Discount amount total
— Clerk report title/reset counter
— Report code
— Clerk name/drawer No.
— Gross total
— Net total
— Cash in drawer
RF No 1
•1.00
CLEAR No 5
•4.43
C02 ...........1
— Refund mode
— Clear key count
— Clerk name/drawer No.
106
Advanced Operations
8
019F
Mode switch
X1/Z1(read/reset)
X HOURLY
0000019
00:00->01:00
CT 1
GROSS •1.10
NET No 1
1.90% •1.20
23:00->00:00
CT 1
GROSS •3.45
NET No 1
3.90% •3.59
------------------------
TL CT 280
GROSS •1,937.61
NET No 25
•2,096.80
— Read symbol/report title
— Report code
— Time range
— No. of customers
— Gross sales amount
— No. of receipt
— Sales ratio/net sales amount
— Total No. of customers
— Gross total amount
— Total No. of receipt
— Net total amount
To print the PLU/flat-PLU read/reset reportThis report shows sales for PLUs.
OPERATION REPORT
8
014F
Mode switch
X1/Z1(read/reset)
X PLU
0000014
PLU0001 17
0.53% •17.00
OLD PRC •0.00
RED PRC •2.18
DISCOUNT •2.50
#000001
PLU0100 42
4.03% •69.00
OLD PRC •0.00
RED PRC •5.18
DISCOUNT •0.50
#000100
------------------------
TL 188.61
•516.10
RED PRC •12.18
DISCOUNT •9.50
— Read symbol/report title
— Report code
— PLU name/No. of items
— Sales ratio/PLU amount
— Old price amount
— Red price amount
— Discount amount
— PLU random code
— Total No. of items
— Total amount
— Red amount total
— Discount amount total
To print the hourly sales read/reset reportThis report shows hourly breakdowns of sales.
OPERATION REPORT
107
Adv
ance
d O
pera
tions
TK-7000/7500 User’s Manual
To print the monthly sales read/reset reportThis report shows monthly breakdowns of sales.
OPERATION REPORT
8
020F
Mode switch
X1/Z1(read/reset)
8
016F
Mode switch
X1/Z1(read/reset)
To print the group read/reset reportThis report shows PLU/subdepartment/department group totals.
OPERATION REPORT
X GROUP
0000016
GROUP01 203.25
33.87% •1,108.54
GROUP02 183
40.58% •1,327.80
GROUP03 12
0.40% •13.25
GROUP99 13
0.54% •17.80
------------------------
TL 862
•3,272.00
— Read symbol/report title
— Report code
— Group No./No. of items
— Sales ratio/group amount
— Group total No. of items
— Group total amount
X MONTHLY
0000020
1......
GROSS 1236.76
•12,202.57
NET No 214
•12,202.57
31......
GROSS 2132
•14,187.57
NET No 205
•13,398.76
------------------------
TL
GROSS 9746.63
•161,022.49
•16.52
NET No 2351
•161,022.49
•68.49
— Read symbol/report title
— Report code
— Date of a month
— Gross symbol/No. of items
— Gross sales amount
— Net symbol/No. of customers
— Net sales amount
— Total symbol
— Gross symbol/No. of items
— Gross sales amount
— Average daily gross sales
— Net symbol/No. of customers
— Net sales amount
— Average daily net sales
108
Advanced Operations
• Periodic sales read report (“X2” mode)You can print read reports at any time during the business day without affecting the data stored in the cashregister's memory.
• Periodic sales reset report (“Z2” mode)You should print reset reports at the end of the business day.
To print the periodic 1/2 sales read/reset reportsThese reports show sales breakdowns of sales by any two kinds of period you want.
OPERATION REPORT
8
1F
Mode switch
X2/Z2(read/reset)
------------------------
ZZ1 BATCH02
------------------------
ZZ1 FIX 0001
0001111
GROSS 981.25
•6,574.40
NET No 111
•7,057.14
CAID •6,919.04
CHID •139.04
CKID •859.85
CRID(1) •709.85
------------------------
RF No 3
•10.22
CUST CT 111
AVRG •63.57
DC •1.22
REF •2.42
CLEAR No 85
ROUND •0.00
CANCEL No 2
•12.97
------------------------
TA1 •2,369.69
TX1 •128.86
TA2 •2,172.96
TX2 •217.33
------------------------
ZZ1 TRANS 0001
0001112
CASH No 362
•1,638.04
CH No 56
•1,174.85
RC No 4
•810.00
PD No 5
— Report title
— Fixed total report title/reset counter
— Report code
— Gross total *2
— Net total *2
— Cash in drawer *2
— Charge in drawer *2
— Check in drawer *2
— Credit in drawer *2
— Refund mode *2
— Customer number *2
— Average sales per customer *2
— Discount total *2
— Refund key *2
— Clear key count *2
— Rounding total *2
— Cancellation *2
— Taxable 1 amount *2
— Tax 1 amount *2
— Taxable 2 amount *2
— Tax 2 amount *2
— Function key report title/reset counter
— Report code
— Function key count/amount *1
109
Adv
ance
d O
pera
tions
TK-7000/7500 User’s Manual
*1 Zero totalled departments/functions (the amount and item numbers are both zero) are not printed.*2 These items can be skipped by programming.
•5.00
CORR No 14
•39.55
VLD No 19
RCT No 3
NS No 5
------------------------
ZZ1 DEPT 0001
0001115
DEPT01 38
8.13% •257.53
OLD PRC •2.21
RED PRC •4.18
DISCOUNT •5.80
DEPT02 183
•1,362.26
RED PRC •123.21
DISCOUNT •17.22
------------------------
TL 88.61
•1,916.10
RED PRC •12.18
DISCOUNT •9.50
------------------------
ZZ1 CASHIER 0001
0001117
C01 ...........1
GROSS 421.25
•2,872.28
NET No 111
•1,845.35
CAID •1,057.14
CHID •139.04
RF No 1
•1.00
CLEAR No 5
•4.43
C02 ...........1
— Department report title/reset counter
— Report code
— Department Name/No. of items *1
— Sales ratio/amount *1
— Old price amount *1
— Red price amount *1
— Discount amount *1
— Total No. of items
— Total amount
— Red amount total
— Discount amount total
— Clerk report title/reset counter
— Report code
— Clerk name/drawer No.
— Gross total
— Net total
— Cash in drawer
— Refund mode
— Clear key count
— Clerk name/drawer No.
110
Advanced Operations
emantropeRedocdnammoC1=#teseR/0=#daeR emantropeR
edocdnammoC1=#teseR/0=#daeR
yliaD cidoireP1
cidoireP2 yliaD cidoireP
1cidoireP
2
rezilatotxiF 11 111# 112# tnemtrapeD 51 511# 512#
yeknoitcasnarT 21 211# 212# )redrotnuoma(05tseb 51006 51106 51206
tnemtrapedbuS 31 311# 312# )redroytitnauq(05tseb 51007 51107 51207
)lla(rebmundrocerybULP * 41 411# 412# puorG 61 611# 612#
edocmodnarybULPlla * 41 411# 412# krelC 71 711# 712#
puorgyb 4100001 411#001 412#001 laudividni 7102 711#2 712#2
tnemtrapedyb 4100002 411#002 412#002 selasylruoH 91 911# 912#
tnemtrapedbusyb 4100003 411#003 412#003 selasylhtnoM 02 021# 022#
puorgyblaudividni 4100201 411#201 412#201 kcehcnepO 52 ----- -----
tnemtrapedyblaudividni 4100202 411#202 412#202 latot 52004 ----- -----
tnemtrapedbusyblaudividni 4100203 411#203 412#203 )lla(tnemtrapedegnarybULPgninnacS 62 ----- -----
rebmundrocerybegnar * 41001 411#1 412#1 puorgegnaryb 6200001 ----- -----
edocmodnarybegnar * 41001 411#1 412#1 tnemtrapedegnaryb 6200002 ----- -----
)redrotnuoma(05tseb 41006 41106 41206 tnemtrapedbusegnaryb 6200003 ----- -----
)redroytitnauq(05tseb 41007 41107 41207 tnemtrapedegnaryb05tseb 62008 ----- -----
)ts1(unem 18 181# 182# tnemtrapedegnarybmetievitcani 62009 ----- -----
)dn2(unem 28 281# 282# )lla(tnemtrapedegnarybULPdnuoftoN 72 ----- -----
)dr3(unem 38 381# 382# sisylanaelbaT 82 821# 822#
)ht4(unem 48 481# 482# metiylruoH 13 131# 132#
)ht5(unem 58 581# 582# hctam&xiM 16 161# 162#
)ht6(unem 68 681# 682# laicnaniF 17 ----- -----
rebmundrocerybULPllakcotsULP * 46 ----- ----- )yeknoitcasnart/meti(laudividnI edocoN ----- -----
edocmodnarybULPlla * 46 ----- ----- )troperon(teserULP 41005 41115 41215
puorgyb 4600001 ----- ----- )troperon(teserULPgninnacS 62005 ----- -----
tnemtrapedyb 4600002 ----- ----- )troperon(teserULPdnuoftoN 72005 ----- -----
tnemtrapedbusyb 4600003 ----- ----- )margorp.lcni(teserelifULPdnuoftoN 72008 ----- -----
puorgyblaudividni 4600201 ----- ----- teserelifecnanetniamULPdnuoftoN 28008 ----- -----
tnemtrapedyblaudividni 4600202 ----- ----- * .margorpybedocmodnaryb/rebmundrocerybesoohcnacuoYtnemtrapedbusyblaudividni 4600203 ----- -----
rebmundrocerybegnar * 46001 ----- -----
edocmodnarybegnar * 46001 ----- -----
To print other sales read/reset reportsThe following reports can be issued.
Procedure
6 Money declaration 6 : : ~ : :aMode switch
X1/Z1X2/Z2(read/reset)
Command code(if necessary)
Report/command code list
111
Adv
ance
d O
pera
tions
TK-7000/7500 User’s Manual
8
1s 8
s
Mode switch
PGMP01....................
CASH @100.00
CHECK @1.00
- @1.00
%- 10%
DEPT01 0001-05
1.2 @1.00
DEPT02 0002-05
1 @2.00
— Program read symbol
— Transaction key unit price or rate
— Department descriptor/rec-#/file-#
— Unit quantity/unit price
Reading the cash register's programTo print unit price/rate program (except PLU/scanning PLU)
OPERATION REPORT
112
Advanced Operations
8
2s 8
s
Mode switch
PGM
P02....................
GROSS 0001-01
NET 0002-01
CAID 0003-01
CATL 0004-01
0005-01
CASH 0001-02
CHARGE 0002-02
CHECK 0003-02
0004-02
SUBDEPT01 0001-03
SUBDEPT02 0002-03
SUBDEPT03 0003-03
0004-03
DEPT01 0001-05
DEPT02 0002-05
DEPT03 0003-05
0004-05
GROUP01 0001-06
GROUP02 0002-06
GROUP03 0003-06
0004-06
C01 0001-07
C02 0002-07
C03 0003-07
0004-07
TBL01 0001-18
TBL02 0002-18
TBL03 0003-18
0004-18
GT1 0001-20
GT2 0002-20
GT3 0003-20
• @No/ ** ⁄ 0001-23
NoCT@ LB *QT 0002-23
X BUSY 0003-23
— Program read symbol
— Fix total character
— Transaction key character
— Subdepartment character
— Department character
— Group character
— Clerk character
— Table character
— Special character
To print key descriptor, name, message program (except PLU)
OPERATION REPORT
FIX 0001-24
TRANS 0002-24
PLU 0003-24
0004-24
BATCH 01 0001-29
BATCH 02 0002-29
BATCH 03 0003-29
0004-29
0001-32
YOUR RECEIPT
0002-32
THANK YOU
0001-33
***ENDORSE MESSAGE******
****************
0002-33
ESSAGE******
0001-34
***SLIP MESSAGE*********
****************
0002-34
AGE*********
0001-39
CHARACTER RECALL********
****************
0002-39
CALL********
ORDER01 0001-65
ORDER02 0002-65
ORDER03 0003-65
0004-65
MC#01 0001-91
MC#02 0002-91
MC#03 0003-91
0001-96
AT COMMAND**************
************************
**************
0002-96
ATA ATI4
PASSWORD 0001-97
— Report header character
— Batch X/Z character
— Receipt message
— Check endorsement message
— Slip/external printer message
— Recall character
— Order character
— Terminal connection table character
— AT command
— Online password
113
Adv
ance
d O
pera
tions
TK-7000/7500 User’s Manual
To print the PLU/flat-PLU program
OPERATION REPORT
8
6s 8
104s
304s 8
: : : : : :
8 F 8
: : : : : : 8
F 8
F
PLU start No.
PLU end No.
If skipped, starts from PLU1.
If skipped, ends the last PLU.
Mode switch
PGM
(PLU unit price read)
(PLU program read)
P01....................
#000001 - #999999
PLU0001 0001-04
#000001
1.2 @1.00
PLU0002 0002-04
#000002
1 @2.00
P03....................
#000001 - #999999
PLU0001 0001-04
00000000000000
11-66 000000
12-66 #000001
13-66 <- 0001-28
14-66 0
15-66 @1234.56
16-66 000000
17-66 00
PLU0002 0002-04
00000000000000
11-66 000000
— Program read symbol
— Read range
— Item character/rec-#/file-#
— Random code
— Unit quantity/unit price
— Program read symbol
— Read range
— Item character/rec-#/file-#
— Batch program 01 ~ 1066, 18 ~ 1966
— Batch program 1166
— Batch program 1266
— Batch program 1366
— Batch program 1466
— Batch program 1566
— Batch program 1666
— Batch program 1766
114
This section describes what to do when you have problems with operation.
When an error occursErrors are indicated by an error codes. When this happens, you can usually find out what the problem is asillustrated below.
Press C and check the appropriate section of this manual for the operation you want to perform.
edocrorrE egasseM gninaeM noitcA
100E edomgnorW .noitazilaniferofebdegnahcnoitisophctiwsedoM dnagnitteslanigirostiothctiwsedomehtnruteR.noitarepoehtezilanif
300E rotarepognorW
noitartsigerafonoitazilaniferofebdesserpnottubkrelC.nottubkrelcrehtonarednudemrofrepgnieb
ehtezilanifdnanottubkrelclanigiroehtsserP.nottubkrelcrehtonagnisserperofebnoitcasnart
ehtdemrofrepkrelcehtmorfsreffidkrelcnodengisehT.noitartsigerkcehcgnikcart
krelcreporpehtngissarorebmunkcehctcerroctupnI.rebmun
400E CF/TINIrorrE .ssergorpninoitareporaelckcoltinuronoitazilaitinI .noitarepoetelpmoC
500E tneiciffusnIyromem
.yticapacyromemlatotsdeecxenoitacollayromeM .)elbissopfi(yromemdnapxeroyromemetacollaeR
800E nongisesaelP .rebmunkrelcagniretnetuohtiwnoitartsigeR .rebmunkrelcaretnE
900E drowssapretnE .drowssapehtgniretnetuohtiwnoitarepO .drowssapretnE
010E rewardehtesolCemitmargorpehtnahtregnolnepotfelsirewardehT
.)mralaneporeward( .rewardehtesolC
110E rewardehtesolC .neposirewardhsacehtelihwretsigerottpmettA .rewardhsacehttuhS
310E raenrepaplanruoJdne
)noitpo(.dneraenrepaplanruoJ .repaplanruojehtecalpeR
510E retnirpJ/RkcehC rorreretnirP
610E GERotkcabegnahCedom
.edomdnuferehtnidetpmettasnoitcasnartevitucesnocowT edomFRehtotkcabnehtdnaedomrehtonaothctiwS.noitcasnarttxenehtrof
710E LBT/KHCretnErebmun
.rebmunkcehcagnittupnituohtiwmetinaretsigerotedamtpmettA .rebmunkcehcatupnI
810E rebmunelbaTretnE .rebmunelbatagnittupnituohtiwmetinaretsigerotedamtpmettA .rebmunelbatatupnI
910E forebmunretnEsremotsuc
forebmunehtgniretnetuohtiwdepmettanoitarepoezilaniF.remotsuc .remotsucforebmunehtretnE
120E kniLtpeDoN .deretsigersiULPdekniltnemtrapedoN .margorpehttcerroC
220E ULPdnuoftoN .elifULPgninnacsehtnidnuoftonsiedocULP .noitartsigertnemtrapedmrofreP
320E egatrohskcotSkcotsmuminimehtnahtsselsemocebytitnauqkcotslautcA
.ytitnauq .ecnanetniamkcotsmrofreP
420E kcotsoN .evitagensi/semocebytitnauqkcotslautcA .ecnanetniamkcotsmrofreP
520E daerelacslagellIyrtnero
elbalacsotnoitartsigerelacs-nonmrofrep/rorredaerelacS.meti
rotnemtrapedreporpaotretsiger/noitartsigeryrteR.ULP
620EretnE
-raperp/tnemidnocULPnoita
.deretsigersiULPnoitaraperp/tnemidnocoN .ULPnoitaraperp/tnemidnocretsigeR
920E rednetehtnInoitarepo
.rednetlaitrapelihw,detibihorpsinoitartsigermetI .noitcasnartehtezilaniF
030E yekXATETARsserPgniretsigertuohtiwdetpmettanoitcasnartafonoitazilaniF
.xat-etar <retsigeR XATETAR .>
130E yekTSsserPgnimrifnoctuohtiwdetpmettanoitcasnartafonoitazilaniF
.latotbuseht .>LATOTBUS<sserP
230E yekTSSFsserPgnimrifnoctuohtiwdetpmemttanoitcasnartafonoitazilaniF
.latotbuspmatsdoofehtfo .>TS/SF<sserP
330E rednetretnEtnuoma
tnuomagniretnetuohtiwdetpmettanoitarepoezilaniF.rednet .derednettnuomaehtretnE
530E tnuomaegnahCtimilsdeecxe
.timilteserpsdeecxetnuomaegnahC .niagaderednettnuomatupnI
630E morfyenomevomeRrewardeht
.timildemmargorpdeecxerewardehtfostnetnoC .noitarepopukcipmrofreP
730E tnuomarotigiDrevonoitatimil
rorretuokcoltigidwol/tuokcoltnuomahgiH .tnuomatcerrocretnE
830E yenommrofrePnoitaralced
sihT.rewardnihsacgniralcedtuohtiwnoitarepoteser/daeR.detavitcasinoitcnufsihtnehwylnosraepparorre .noitaralcedyenommrofreP
040E tseugeussItpiecer
agniussituohtiwnoitcasnartwenaretsigerottpmettA.tpiecertseug .tpiecertseugaeussI
140E noitadilavtnirP .noitadilavtuohtiwnoitcasnartwenaretsigerottpmettA .noitareponoitadilavmrofreP
240E repapDLVtresnIyrterdna
.tuonursah)retnirppils(repapnoitadilaV .repapnoitadilavwentresnI
440E euqehctnirP .kcehcgnitnirptuohtiwnoitcasnartwenaretsigerottpmettA .tnirpkcehcmrofreP
540E euqehCtnirPtnemesrodnE
kcehcgnitnirptuohtiwnoitcasnartwenaretsigerottpmettA.tnemesrodne .tnemesrodnekcehcmrofreP
640E llufreffubGER.llufreffubnoitartsigeR
.llufreffubkcehcetarapeS.noitcasnartehtezilaniF
.reffubkcehcetarapestneiciffusetacollA740E llibtnirP .pilsgnitnirptuohtiwnoitcasnartwenaretsigerottpmettA .noitarepognitnirppilsmrofreP
840E repappilstresnIyrterdna
.retnirppilsehtnituosirepaprodetresnisirepapoN .repappilswentresnI
Troubleshooting
115TK-7000/7500 User's Manual
Troubleshooting
edocrorrE egasseM gninaeM noitcA940E llufyromemKCEHC .llufyromemxednignikcartkcehC .desuyltnerrucrebmunkcehcehtesolcdnaezilaniF
050E llufyromemLIATED .llufyromemliatedgnikcartkcehC .desuyltnerrucrebmunkcehcehtesolcdnaezilaniF
150E si.oNLBT/KHCdeipucco
<esuedamottpmettA KCEHCWEN wenanepoot>gnitsixenarofdesuydaerlasitahtrebmunagnisukcehc
.yromemgnikcartkcehcnikcehc
ehtrednuyltnerrucsitahtkcehcehtesolcdnaezilaniFkcehctnereffidaesuroesuottnawuoytahtrebmun
.rebmun
350E tonsi.oNLBT/KHCdenepo
<esuotedamtpmettA KCEHCDLO kcehcwenanepoer>nikcehcgnitsixenarofdesutonsitahtrebmunagnisu
.yromemgnikcartkcehc
anepoerottnawuoyfi(rebmunkcehctcerrocehtesUro)yromemgnikcartkcehcnistsixeydaerlatahtkcehc
<esu KCEHCWEN .kcehcwenanepoot>
450E .oNLBT/KHCfotuOegnar
.revoegnarrebmunkcehC .rebmuntcerrocretnE
550E KHCPESehtnInoitarepo
kcehcetarapesgniruddetibihorpsinoitartsigerlamroN.noitarepo .noitarepokcehcetarapesetanimreT
950E roNI-TAEsserPyekTUO-EKAT
-TAE<gniyficepstuohtiwnoitcasnartaezilanifottpmettA.>TUO-EKAT<ro>NI .>TUO-EKAT<ro>NI-TAE<sserP
060E enilfforetnirP enilfforetnirplanretxE
160E rorreretnirP .nwodtnewretnirplanretxE
260E dnerepapretnirP dnerepapretnirplanretxE .repapwenecalpeR
360E ysubretnirP .gnitnirpwonsiretnirplanretxE
460E llufreffubtnirP llufreffubgnitnirP
660EehtmorftnirP
ehtfogninnigebnoitcasnart
.pilsnonoitcasnartdetarapestsalehttnirpottpmettA noitcasnartehtfogninnigebehtmorftnirP
570EecnalabevitageN
ebtonnacdezilanif
nahtsselsiecnalabnehwnoitcasnartaezilanifottpmettA.orezotlauqero
evitisopsemocebecnalabehtlitnu)s(metiretsigeR.tnuoma
580EnitsixeataD
noitadilosnocelif
.elifnoitadilosnocehtnistsixeataD .atadehtraelC
990E smetiPFNkcehC .metiULPdnuoftonehtetadilosnocroteser/daerotelbasiD
001E retsamtaetarepOlanimret
.noitareporetsamtibihorP .lanimretretsamtatimrofreP
101EecnanetniamULPsserP.llufelif
tixeot>2#<
elifecnanetniamhctab/ecnanetniamtceridULPgninnacS.llufsemoceb .ecnanetniamehtetanimreT
201EecnanetniamPFNsserP.llufelif
tixeot>2#<.llufsemocebelifecnanetniamULPdnuoftoN ecnanetniamehtetanimreT
501E llufelifULP llufelifULPdnuofton/ULPgninnacS
601E ehtnistsixemetIelifULP
gninnacsehtnidetsixeydaerlasahmetidetangisedehT.elifULP .metidetangisedehtyfidoM
121E putratsenilnIrorre
.rorreputratskrowteN
931E ecnalabevitageNdewollatonsi
ecnalabehtnehw>NPC<ro>–<retsigerottpmettA.evitagensemoceb .tnuomanopuoc/sunimreporpretnE
041E unemgnorW .MGPybdetibihorpsiredlohteehssihT .redlohteehstcerrocteS
641E eliftnemegnarrAlluf
.llufsieliftnemegnarrA .ylreporptnemegnarraehtteS
002E 9-CARtresnI .tessiettessacyromemoN .ettessacyromemteS
202E dnuoftoneliFyromemehtnisielifdetangisedonesuaceb,daertonnaC
.yromemhsalflanretniroettessac .yrterdnanoitarepoehtkcehC
302E tneiciffusnIyromem
lanretniroettessacyromemehtniyromemtneiciffusnI.yromemhsalf .ettessacyromem)dettamrof(tnacavaesU
402E etirwehtkcehChctiwstcetorp
.nosiettessacyromemehtfohctiwstcetorpetirW .hctiwstcetorpetirwehtkcehC
502E ydaerlaeliF.tsixe
nineebydaerlasahelifdetangisedesuaceb,etirwtonnaC.yromemhsalflanretniroettessacyromemeht .yrterdnanoitarepoehtkcehC
Trou
bles
hoot
ing
116
When the register does not operate at allPerform the following check whenever the cash register enter an error condition as soon as you switch it on. Theresults of this check are required by service personnel, so be sure to perform this check before you contact aCASIO representative for servicing.
Start
Is register plugged in?
Is power on?
Do figures appear on the display?
Do keys function?
Does paper feed?
Printing becomes light?
Install new ink ribbon.
Plug in the power cord.
Set the mode switch to any position other than OFF.
Use other outlet.
Set to correct position.
Load paper.
No
No
No
No
No
No
No
No
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Is the electrical outlet active?
Contact CASIO servicerepresentative.
Is the mode switch positioncorrect?
Contact CASIO servicerepresentative.
Is paper loaded correctly?
Contact CASIO servicerepresentative.
Contact CASIO servicerepresentative.
Troubleshooting
117TK-7000/7500 User's Manual
Clearing a machine lock upIf you make a mistake in operation, the cash register may lock up to avoid damage to programs and preset data.Should it happens, you can use the following procedure to clear the lock up without losing any data.1 Power off the register.2 Insert the PGM key in the mode switch.3 Press down f, and turn the mode switch to PGM mode.4 The display shows ten Fs, then release f.5 Press s. The display shows ten Fs and issue a receipt.
Important!• If the register does not show ten Fs, never press s and call service representative.
In case of power failureIf the power supply to the cash register is cut by a power failure or any other reason, simply wait for power to berestored. The details of any on-going transaction as well as all sales data in memory are protected by thememory backup batteries.
• Power failure during a registrationThe subtotal for items registered up to the power failure is retained in memory. You will be able to continue withthe registration when power is restored.
• Power failure during printing a read/reset reportThe data already printed before the power failure is retained in memory. You will be able to issue a report whenpower is restored.
• Power failure during printing of a receipt and the journalPrinting will resume after power is restored. A line that was being printed when the power failure occurred isprinted in full.
• OtherThe power failure symbol is printed and any item that was being printed when the power failure occurred isreprinted in full.
The memory protection battery is constantly charging and discharging as you switch the cash register on and offduring normal operations. This causes the capacity of the battery to decrease after approximately five years ofuse.
Important !• Remember a weak battery has the potential of losing valuable transaction data.
• A label on the back of the cash register shows the normal service period of the battery installed inyour cash register.
• Have the battery replaced by your dealer within the period noted on this label.
Troubleshooting
Trou
bles
hoot
ing
118
11111Open the printer cover.
22222Remove the printer subcover.
Knob
To replace the ink ribbon
User Maintenance and Options
33333Pull up the knob of theribbon cassette.
44444Load a new ink ribboncassette into the unit.
55555Turn the knob on the rightside of the cassette to takeup any slack in the ribbon.
66666Reload the roll paper and replace the printer cover andprinter sub cover.
Important!Use only the ERC-32(P) ribbon (purple). Other types of ink ribbons can damage the printer.
Never try to extend the life of an ink ribbon by replenishing the ink.
Once an ink ribbon is in place, press <#/NS> or <NS> to test for correct operation.
119TK-7000/7500 User's Manual
REG2 X1
REG1 Z1
OFF X2/Z2
RF
PGM
22222Press j to feed about 20cm of paper.
33333Cut the journal paper at thepoint where nothing isprinted.
44444Remove the journal take-upreel from its holder.
55555Slide the printed journalfrom the take-up reel.
66666Cut the journal paper asshown in the photograph.
77777Press j to feed theremaining paper from theprinter.
88888Do not pull the paper out ofthe printer by hand. It candamage the printer.
99999Remove the old paper rollfrom the cash register.
00000Load new paper asdescribed on page 10 ofthis manual.
11111Set the mode switch to theREG1 position and removethe printer cover.
To replace journal paper
User Maintenance and Options
Use
r M
aint
enan
ce a
nd O
ptio
ns
120
To replace receipt paper
22222Cut the receipt paper asshown in the photograph.
33333Press f to feed theremaining paper from theprinter.
44444Do not pull the paper out ofthe printer by hand. It candamage the printer.
55555Remove the old paper rollfrom the cash register.
66666Load new paper asdescribed on page 11 ofthis manual.
User Maintenance and Options
Follow step 11111 under “To replace journal paper” on the previous page.
To replenish the stamp ink
22222Remove the stamp padfrom its holder by liftingthe knob.
Follow step 11111 under “To replace journal paper” on the previous page.
33333Squirt one or two drops ofink into the holes on theback of the stamp pad.
44444Replace the stamp pad onits holder.
Options
Wetproof cover: WT-78,WT-79 (For TK-7000)
Memory chip: RAM-610-10LLMemory cassette: RAC-9Hand held scanner: HHS-15
Slip printer: SP-1300Cable: PRT-CB-8C
External printer: UP-350, UP-250Cable: PRT-CB-8A or PRT-CB-8BPower supply: PS-170 and AC-170
Consult with your CASIO dealer for details.
121TK-7000/7500 User's Manual
* Specifications and design are subject to change without notice.
Specifications
dohtemtupnI:yrtnE )revolloryek-2(syek8yromemreffub,metsysyek-01
:tnemtrapeD metsysyeklluFyalpsiD
noitcasnart,ffo/notpiecer,egnahc,latot,staeperfo.oN;)noisserppusorez(stigid01tnuomArotacidni
stigid61rotpircseD × emankrelc,edom,smetifo.oN,rotpircsedmeti;senil2retnirP
:tpieceR )yek(hctiwsffo/notpiecer,stigid42metsysciremun-ahplaxirtamtoDyllacitamotuadetnirpsinagolsroemanerotS
:pmatsogoL )H(02 × mm)W(03:lanruoJ stigid42metsysciremun-ahplaxirtamtoD
gnidniwllorpuekatcitamotuA)noitpo(rosnesdneraenrepaplanruoJ
:noitadilaV pilsediw)muminim(mm531rof,enileno,stigid55:llorrepaP )W(54 × mm)D(38:deefrepaP lanruojdnatpiecerrofetarapeS:deepstnirP s/l0.3yticapacgnitsiL
:tnuomA 99999999:ytitnauQ 999.9999
:tnuomaderedneT 9999999999:tnecreP 99.99:etarxaT 9999.9999:srebmuN 9999999999999999
atadlacigolonorhC:tnirpetaD radnelaccitamotua,lanruojrotpiecernotuotnirpetadcitamotuA:tnirpemiT metsysruoh-21/metsysruoh-42,lanruojrotpiecernotuotnirpemitcitamotuA
mralAmralalenitnes,mralarorre,enothctacyeK
yrettabnoitcetorpyromeM.syad09yletamixorpparofseiromemstcetorpegrahcllufruoh-84
.sraeyevifyrevedecalperebdluohsyrettaBnoitpmusnocrewop/ylppusrewoP
.etalpgnitarehteeSerutarepmetnoitarepO
)F˚401~F˚23(C˚04~C˚0yitidimuH
%09~01thgiewdnasnoisnemeD
)H(mm454 × )W(mm543 × gk5.6/)D(mm81271
8/7)H(" × 31
61/9)W(" × 8
61/9.zo5.sbl41/)D("
rewardtuohtiw…
srezilatoT stnetnoC
yrogetaCfo.oN
srezilatottnuomA)stigid01(
smetifo.oN/regetni6()lamiced3
tnuoC)stigid4(
fo.oNsremotsuc)stigid6(
cidoirePsrezilatot
tnemtrapeD 01otpU ✔ ✔ ✔
ULP 612otpU ✔ ✔
krelC 51 ✔ ✔ ✔ ✔
selasylruoH 42 ✔ ✔
selasylhtnoM 13 ✔ ✔ ✔
noitcasnarT htiwelbairaVmargorp
htiwelbairaVmargorp ✔
elbattessernoNlatotdnarg 3 ✔
)stigid61(retnuocteseR 51/21 ✔
.oNevitucesnoC 1 ✔)stigid6(
Use
r M
aint
enan
ce a
nd O
ptio
ns/S
peci
ficat
ions
122
Index
A
add check 24, 84adding to a check 81addition (+) 56alphabet key 99arrangement 24, 63assigning a clerk 30
B
backspace key 99bill copy 24, 90bottle link 62bottle return 24, 62bottom message 28, 95
C
cancel 21, 22, 24, 52cash/amount tendered 21, 23, 43change 32character code 100character code fixed key 99character enter key 99character fixed key 99character keyboard 99charge 21, 23check 21, 23, 43check endorsement 24check print 24check tracking 80clearing a machine lock up 117clerk button 17, 30clerk interrupt 54clerk key 30clerk key/button/lock 16, 30clerk lock 17, 30clerk name 30, 95clerk number 20, 22, 94clerk read/reset report 103clerk secret number key 17, 30clerk transfer 24, 86closing a check 82commercial message 28, 95commission rate 94condiment 88consecutive No. 28correction 50coupon 24, 59coupon II (2) 24, 59credit 21, 23, 43cube 24currency exchange 24, 64customer display 18customer number 24
D
daily sales read/reset report 104daily sales reset report 53date display 31date set 12declaration 24department 21, 23, 32deposit 24, 89descriptor 95discount (%-) 20, 22, 40display 18double size letter key 99drawer 17
E
eat-in 24EBT (electronic benefits transfer) 24, 75editing character 101entering characters 99error code 114error correction 21, 22, 50Euro 21, 23, 44
F
financial read report 103flat PLU 21, 22, 32food stamp 66food stamp shift 24, 66food stamp subtotal 24, 66food stamp tender 24, 66
G
group read/reset report 107guest receipt 82
H
high amount limitation 34hourly sales read/reset report 106
I
Illinois rule 69indicator 19individual clerk read/reset report 103individual department, PLU/flat-PLU read report 102ink ribbon 14, 118item counter 19, 28
J
journal 10, 28, 119journal skip 28
123TK-7000/7500 User's Manual
Index
Inde
x
K
Ketten Bon 24keyboard (TK-7000) 20keyboard (TK-7500) 22
L
left cursor key 99loan 20, 22, 49logo message 28, 95
M
machine No. 28main display 18manual tax 24media change 22, 49menu shift 24merchandise subtotal 24, 39message 28, 95minus 20, 22, 41mixed tender 43mode key 15mode switch 16money declaration 103, 105monthly sales read/reset report 107multiplication 21, 23, 33, 37multiplication/for 21, 22, 33, 38
N
new balance 24, 81new check 24, 80new/old check 24, 80no sale 20, 23, 24non add 20, 23, 24normal receipt 24not found PLU 93number of customers 77
O
OBR (optical barcode reader) 24old check 24, 80one touch NLU 24, 93open 20, 22open 2 (release compulsion) 25, 78open check 25open PLU 38opening a check 81operator number 25, 86operator X/Z 25option 120
P
paid out 21, 23, 48paper feed 20, 22periodic sales 108pick up 20, 22, 49PLU 36PLU/flat-PLU read/reset report 106plus 25post receipt 20, 22power failure 117premium (%+) 25, 57preparation 88preset price 35preset tax status 35preset tender 61previous balance 25previous balance subtotal 25previous item void 92price 25, 38price change 25price inquiry 25price reductions (red price) 87price shift 25printing slip 79program end key 99
R
rate tax 25read report 102recall 25receipt 11, 28, 120receipt on/off 20, 22receipt on/off switch / key 14received on account 21, 23, 48red price 25, 87reduction 41refund 20, 22, 47remove/replace the sheet holder 26repeat 19, 32, 37reset report 53, 102return 47review 25, 85, 92RF mode 47right cursor key 99roll paper 14
124
Index
S
scale 25scanning PLU 93second unit price 60separate check 25, 85set menu 63shift key 99sign off 30sign on 30single item 32, 37, 55slip 79slip back feed/release 25, 79slip feed/release 25, 79slip print 25, 79space key 99split sales of packaged item 33, 38square 25stamp ink 120stock check 54stock inquiry 25, 91store 25subtotal 21
T
table number 25, 81table transfer 25, 86takeout 25tare 25tax exempt 25tax shift 20, 22, 39taxable amount subtotal 25taxable status 39text print 25text recall 25, 78time display 31time set 12tip 25, 76trainee status 94tray total 25, 58
U
unit price inquiry 91unit weight 25
V
validation 20, 22, 46VAT 20, 22, 89void 25
W
wetproof cover 15, 120
125TK-7000/7500 User's Manual
Inde
x
MEMO
MEMO
MEMO
MEMO
MEMO
CASIO COMPUTER CO., LTD.6-2, Hon-machi 1-chomeShibuya-ku, Tokyo 151-8543, Japan
TK-7000E*E
SA0106-E Printed in Malaysia