Elbow Repair System

Your 1 Source For Infrastructure & Water Management Solutions

Elbow Radius Point Repair

Phone: 810-412-4740 • www.S1Eonline.com

Your 1 Source For Infrastructure& Water Management Solutions

Permanently Repair Difficult Elbow Sewer FittingsBacked by PipePatch’s quality guarantee, Source One Environmental (S1E) has designed the Elbow Packer System, a unique and original No-Dig solution to structurally repair elbow sewer fittings and radial bends.

Before this new advancement in CIPP lining, the process was the evasive open-cut method. The Elbow Packer can be pushed or pulled into place to create a wrinkle-free liner, even in a 90 degree bend. Our 100% Fiberglass Radial Point Pipe Repair Technology structurally rehabilitates the bend, while remaining cost and time effective. This proprietary system is also an ideal solution prior to full lining by creating a smooth radius that eliminates a misguided or bunched up liner. The Elbow Repair System is used globally to fix sections of pipe connected to the main sewer line or where transitional bends are inaccessible.

Fully approved by S1E and PipePatch quality standards, the Elbow Packer point repair system has been utilized around the nation as the only trenchless solution for repairing elbow fittings.

S2214

Elbow Repair System Radial Point Repair Technology

SPECIAL FEATURES• Repairs radius sewer fittings• Repairs 2” to 8” diameters• Shape conforming• Eliminates infiltration• Cost efficient

S1E EQUIPMENT NEEDED• Elbow packer• Elbow repair kit• PipePatch flex adaptor• Air regulator• Push rods/pull cable• Air compressor

PipePatch conforms to the fitting’s exact shape.

Contact us today for more information.