Technical Datasheet Peltor™ Optime™ II · Peltor™ Optime™ II Modern, stylish slim line cup...
Transcript of Technical Datasheet Peltor™ Optime™ II · Peltor™ Optime™ II Modern, stylish slim line cup...
Peltor™ Optime™ II
� Modern, stylish slim line cup design � Liquid sealing rings for improved comfort � Unique low profile headband design helps maintain
constant pressure thus providing confidence inprotection
� Large space inside cup helps reduce moisture andheat build-up
� Soft wide cushions helps reduce pressure aroundthe ears and improves comfort and wearability
� Easy to replace cushions and inserts helps keepthem hygienically clean
� Easy to understand attenuation symbol to helpensure correct product selection
� Helmet mounted version fits directly to manyindustrial safety helmets without the need for anadapter.
H520 (Optime II) NL
FondelecIris
NLNL
Balance HD
1125/ARCO Plus
SNL
NL
BalanceBalance AC
SNLSNL
Super V-Gard II V-Gard
SNL SNL
Peltor Petzl
EG
Romer Romer
BB
E
Romer Schuberth
EAE
Schuberth Schuberth
EB E
VossVoss
*Protector Style 300 includes all 300-versions of this helmet.
Technical Datasheet
Key Features
Model
P3 Adaptor
EF
Auboueix Auboueix Auboueix E
E
E
Berendsen Safety Centurion
Centurion H
AE
Evert Larsson Evert Larsson Kemira A
EE
MSA MSA Peltor K,E
E
Combination size range according toEN352-3
H520 (Optime II)
SNLSNL
Style 300* Style 600 Tuffmaster II NL
SNL SNL
N2 Atlas Nomaz Profi Expo Profi Nomaz SNL
SNL SNL
BER80/WPC80 BER S BOP R SNL
SNL SNL
SW1Airwing Inap 88 SNL
NL NL
Inap PCG NL
The Peltor Optime II range passive earmuffs areavailable in headband, neckband, foldable or helmetmounted version. These products are designed toprovide moderate to high level of attenuation thatmeets the needs of many industrial applications wherehigh levels of noise may be encountered.
When correctly selected and worn these products helpreduce exposure to hazardous levels of noise and loudsounds.
The helmet mounted version is designed to fit a widerange of industrial safety helmets (see below forfurther details).
NOTE: Two options are available in the Optime IIrange; high visibility and dielectric.
Helmet Manufacturer
Combination size range according toEN352-3
1465 Brennus SNL
SNLNL
Iris 2 Oceanic
Opus NL
SNL
SNL
1100/ARCO Type 2 1540/ARCO Robust SNL
NLNL
Top Cap LP2002 LP2006 SNL
SNLSNL
G2000 G22 (Basic Set)
Model
P3 Adaptor
EE
Protector Protector Protector E,G
BB
Romer
Romer Romer E
BBB
Schuberth Schuberth Schuberth B
BEB
Schuberth Uvex Voss E
EE
Voss G
Product Description
Helmet mounted approved combination:
3M Auboueix
FE
Sofop Taliaplast Sofop Taliaplast
N
H
CenturionEvert Larsson
EE
LAS LAS
EE
Peltor
Helmet Manufacturer
G3000 Vertex
SNL SNL
Bravo 2 Nomaz Marcus Top 2 Atlas Nomaz
SNL
SNL
Top Expo Atlas BEN
SNLSNL
PIONIER SH91/WP91
NLSNL
Inap Master Inap Star
PVC
Polyether ABS
PVC
Polyether ABS
Stainless Steel Wire, PVC, Acetal
Helmet mounted version
The following materials are used in the manufacture of this product.
The Peltor Optime II range earmuffs are ideal forprotection against noise arising from a wide range ofapplications in the workplace and leisure activity. Examples of typical applications include:-
� Airports � Automotive � Cement manufacture Construction � Chemical & pharmaceutical manufacture � Construction � Heavy engineering � Metal processing � Printing � Textile manufacture � Woodworking
CushionsInserts
Helmet attachment arm
Cushions Inserts
Headband padding
Component
Headband, Neckband and Foldableversion
Standard & Approval
Technical Datasheet
Polyether
Stainless Steel Wire, PVC, Acetal, Polyamid
Polyether
PVC
Material
The Peltor Optime II range earmuffs are tested andCE approved against the European Standard EN352-1:1993 (headband, neckband and foldable version)and EN352-3:2002 (helmet mounted version). Theseproducts meet the Basic Safety Requirements as laidout in Annex II of the European Community Directive89/686/EEC. These products have been examined atthe design stage by the Finnish Institute ofOccupational Health (FIOH), Topeliuksenkatu 41aA,FIN- 00250 Helsinki, Finland (Notified Body number0403).
Peltor™ Optime™ II
Cushion cover
Cups
Cushion cover
Cups
Headband/Neckband/Foldable
Materials
Applications
SNR = 30dB
37.5 16.7
2.62.72.3
35.4 19.4 15.1
2000125Frequency (Hz)
H = 34dB
32.830.2 APVf (dB)
2.5 2.6
39.8 32.6 14.5
400025063
M = 29dB
31.237.4 13.8
2.4 2.5sf (dB)
39.6 20.4
8000500125
L = 20dB
37.9 34.013.0
4.0 2.1 1.9
36.4 32.5 Mf (dB)
1000250
Optime II Headband Version (H520A)
H = 34dB
33.6 29.3 APVf (dB)
2.4 2.7
39.2 32.0 14.1
400025063
M = 28dB
32.036.6 14.1
2.32.4 sf (dB)
39.1 20.3
8000500125
L = 20dB
37.8 33.8 12.9
4.2 2.2 2.1
36.232.3Mf (dB)
1000250
Optime II Neckband Version (H520B)
SNR = 31dB
30.417.7
2.3 2.4 1.6
34.439.3 16.2
2000500Frequency (Hz)
Technical Datasheet
M = 28dB
31.0 13.0
2.6 sf (dB)
39.9
8000500
L = 20dB
37.3 12.7
2.7 2.0
35.1 Mf (dB)
1000
Optime II Foldable Version (H520F)
SNR = 31dB
17.8
2.4 1.8
35.4 15.9
2000Frequency (Hz)
H = 34dB
30.2APVf (dB)
2.5
40.2 14.6
400063
Peltor™ Optime™ II
L = 19dB
36.6 11.8
4.4 2.1
36.2 Mf (dB)
1000
Optime II Helmet Mounted Version (H520P3)
SNR = 31dB
17.7
2.5 1.8
34.7 16.1
2000Frequency (Hz)
H = 34dB
29.8APVf (dB)
2.6
40.2 14.7
400063
M = 29dB
37.2 14.3
2.3sf (dB)
20.2
8000125
Attenuation values
3M Occupational Health &Environmental Safety Division EMEA Region 3M Svenska AB Mammstensgatan 19 331 02 Värnamo Sweden Website: www.3M.eu/occsafety
Please recycle. © 3M 2009. All rights reserved.
Accessories/Replacement Parts
Technical Datasheet
The cushions and inserts on the Optime range II canbe replaced with the HY52 Hygiene Kit for improvedcomfort and reassured protection.
The HY100A and HY100A-01 Hygiene Pads can beplaced on the cushions to help absorb moisture andsweat.
Peltor™ Optime™ II
EU_M
aste
r_01
Key
APVf = Assumed Protection Value
Mf = Mean attenuation value
sf = Standard deviation
H = High-frequency attenuation value (predictednoise level reduction for noise with L(C) – L(A)= -2dB)
M = Medium-frequency attenuation value (predictednoise level reduction for noise with L(C) – L(A)= +2dB)
L = Low-frequency attenuation value (predicted noiselevel reduction for noise with L(C) – L(A) = +10dB)
SNR = Single Number Rating (the value that issubtracted from the measured C-weighted soundpressure level, L(C) in order to estimate the effectiveA-weighted sound pressure level inside the ear).