ECO HOT WATER - Emmeti – Home€¦ · A EPE pipe Ø internal 160 mm 2 PVC pipe Ø 160 mm 3 Tee...
Transcript of ECO HOT WATER - Emmeti – Home€¦ · A EPE pipe Ø internal 160 mm 2 PVC pipe Ø 160 mm 3 Tee...
Ecoenergy
I d e a s t o i n s t a l l
ECO HOT WATERAir-water heat pump for domestic hot water with integrated solar panels and remote control via App GB 02
The Eco Hot Water heat pump
The EMMETI heating pumps have a square form
factor for better installation in all spaces.
To install the device you only need to link the intake and
exit water tubes, the condensation dump and the home
electric system.
The EQ 2014 and EQ 3014 ES water pumps take the heat from the
surrounding air and cede it to the water inside the tank, reducing costs
for heating of water which means a great economic saving, up to 70% in
comparison with traditional electric water heaters.
Moreover, the Eco Hot Water heating pump, coupled with the FEBOS accessory
(not included), can be remotely activated through smartphone/tablet; free app down-
loadable from the Apple Store and Google Play.
The Range
Model EQ 2014 EQ 3014 ES
Tank capacity 200 ℓ 300 ℓ
Average heating capacity 1,8 kW 1,8 kW
dB
kWh/annum GJ/annum
A B C D E F G
2015 812/2013
A
L
1020
983
936
--
--
--54
EQ 2014
dB57
dB
kWh/annum GJ/annum
A B C D E F G
2015 812/2013
A
XL
1393
1345
1283
--
--
--54
EQ 3014 ES
dB57
EQ 2014
EQ 3014 ES
Ecoenergy
I d e a s t o i n s t a l l
Energy saving gets Economic saving
On the basis of the European data it is clear that the annual energy consumption for domestic hot water production of an average family
composed by 3 persons is equal to 1.840 kWh/year.
Electric heat pump heaters
EQ 2014EQ 3014 ES
EQ 3014 ES + Thermal solar
EQ 2014 - EQ 3014 ES+ Emmeti Sun
+ ++ ++ ++ +
Electrical energy consumption 1840 kWh/year 620 kWh/year 320 kWh/year 0 kWh/yearAnnual energy cost 408 €/year 136 €/year 70 €/year 0 €/year
NB: Data refer to the following conditions: annual average temperature of the inlet air equal to 20 °C - Electricity cost 0.22 €/kWh
EQ 2014 model
• Capacity 200 liters.
• S235 JR steel boiler with internal inorganic coating.
Both models
• Insulation in rigid polyurethane foam (PU) of high thickness and
without CFC and HCFC, average thickness 50 mm.
• Anticorrosion electronic anode (2 on model EQ 3014 ES).
• External painted sheet metal with epoxy powders (silver gray
color).
• Hydraulic fittings placed on the left side.
• 1.5 kW 230 V~ electric heater integration.
Manually activable through control panel or automatically as
heating pump integration or anti-legionella treatment.
• R134a ecological refrigerant fluid.
• Rotary compressor for the maximum quiet operation.
• Centrifugal fan.
• Condenser wrapped around the steel boiler (not immersed in the
water).
• Touch screen control panel, backlit to allow the different working
parameters settings within 24 hours.
EQ 3014 ES model
• Capacity 300 liters.
• AISI 316-L stainless steel boiler with internal pickling coating.
• Exchanger for solar integration with a surface of 1 m2.
Constructional characteristics
TEMP
Works withiPhone
Rete elettrica
Contatoredi scambio(ENEL)
Contatoredi produzione(GSE)
FEBOS
Fotovoltaico
Inverter
Uscita ariaIngresso aria
Uscita acqua caldasanitaria
Ingresso acqua fredda
A
2
AA
3
EPE pipe Ø internal 160 mmA PVC pipe Ø 160 mm2 Tee ABS with diverter valve - Ø internal 160 mm3
Installation example for EQ 2014 with FEBOS accessory
Electrical network
Main Exchange Meter(ENEL)
GenerationMeter(GSE)
Photovoltaic
Outlet airInlet air
Outlet sanitary hot water
Inlet cold water
Works withiPhone
Installation example for EQ 3014 ES with FEBOS accessory
Electrical network
Main Exchange Meter(ENEL)
FEBOS
Photovoltaic
Inverter
Outlet airInlet air
Outlet sanitary hot water
Inlet cold water
EPE pipe Ø internal 160 mmA PVC pipe Ø 160 mm2 Tee ABS with diverter valve - Ø internal 160 mm3
Thermal solar
Condenser
Solar exchanger
Insulation
Solare termico
A
2
AA
3
GenerationMeter(GSE)
Technical Data
Working range
Model EQ 2014 EQ 3014 ES
Nominal power consumption by compressor W 460 460
Installation with heat source: Indoor air DB 20°C ( Outdoor air DB 7°C ), according the Regulations EU n° 812-814/2013 and Standard EN 16147:2011
Declared load profile L XL
Energy efficiency class A (A*) A+ (A+*)
Thermostat temperature setting °C 55 55
Heating up time h:min 5:15 (6:45*) 7:15 (11:15*)
Heating up energy input kWh 2,55 (3,05*) 3,50 (4,90*)
Total energy consumption during tapping cycle WEL-TC kWh 4,29 (4,68*) 5,79 (6,30*)
COPDHW 2,71 (2,49*) 3,29 (3,03*)
Standby power input W 36 32
Maximum volume of usable hot water (40 °C) ℓ 239 343
Sound power level LWA, indoors dB(A) 59 (54*) 59 (54*)
Sound power level LWA, outdoors -(57*) -(57*)
Refrigerant load R134a / CO2 eq. (GWP = 1430) kg / t 0,95 / 1,36 0,95 / 1,36
Max working pressure refrigerant circuit (HP/LP) Mpa 2,1 / 1,3 2,1 / 1,3
Power supply V~ / Hz 230V~ 50Hz 230V~ 50Hz
Maximum power consumption W 2050 2050
Maximum current consumption A 8,92 8,92
N. of electrical heaters x power consumption W 1 x 1500 1 x 1500
Air flow m3/h 400 400
Static pressure Pa 40 40
Storage capacity ℓ 200 300
Water fittings Ø G 3/4" F G 3/4" F
Max working pressure bar 7 7
Dimensions (WxDxH) mm 590x565x1750 664x642x1820
Grade of protection IPX1B IPX1B
Dimensions of air connections (Ø / max length) mm/m 160 / 10 160 / 10
Weight (net / with water) kg 115 / 315 122 / 422
* Outdoor air DB 7 °C
Model EQ 2014 EQ 3014 ES
Inlet air temperature -5 ÷ 43 °C -5 ÷ 43 °C
Water temperature (heat pump) 9 ÷ 60 °C 9 ÷ 60 °C
Installation room temperature 5 ÷ 35 °C 5 ÷ 35 °C
Minimum volume of room installation 30 m3 30 m3
Components and dimensions
Model EQ 2014
Model EQ 3014 ES
1 Auxiliary electric heater 1.5 kW
B Electronic anode protection
C Storage water discharge
D Inlet sanitary cold water
E Output sanitary hot water
F Condensation discharge
G Safety valve pressure & temperature (P&T)
H Inlet for solar panel
I Output for solar panel
J Inlet water recirculation
K Inlet air Ø 160 mm
L Outlet air Ø 160 mm
M Passage of electric cables
N Control panel
590
275460
1730
420
16,5
92,5
370
9501050
884
��
��
�
�
�
�
80
575
380
220
590
190
150
�
�
�
664
1804
253
16,5
107,
525
3
96211
12
733
563
35337
056373
3
�
�
�
�
��
�
�
��
��
410
290642
664
150
190
��
�
Inlet air
Inlet air
Outlet air
Outlet air
Rev.
A -
09.2
017
- Uffi
cio
Pubb
licità
& Im
mag
ine
- BT
EMMETI spa - Via Brigata Osoppo, 166 - 33074 Vigonovo frazione di Fontanafredda (PN) - ItaliaTel. 0434.567911 - Fax 0434.567901 - www.emmeti.com - [email protected]
Accessories (supplied separately)
EPE gray pipe Internal Ø 160 mm L = 2 m
ABS black tee int. Ø 160 mmwith diverter valve
Elbow 90° EPE grayInternal Ø 160 mm
Elbow 45° EPE grayInternal Ø 160 mm
Respect the environment!For a correct disposal, the different materials must be divided and collected according to the regulations in force.
Emmeti copyrightAll rights are reserved. This publication nor any of its contents can be reproduced or publicized without Emmeti’s written authorization.
The data contained in this publication are subject to change in every time, for technical and commercial requirements.
Emmeti are not responsible for eventual errors or inexactitudes.
9900595800001
PVC ivory pipeØ 160 mm L = 1 m
230 V - 30A active energy meter
for DIN 1M tracks
PP couplingfor EPE pipe
Internal Ø 160 mm
PP fixing collarfor EPE pipe
Internal Ø 160 mm
Wall-mounted external grids assembly for air inlet and outlet,
including springs and chains
FEBOS, Single-phase and Three-phase versions (*)
(*) To use with single-phase heat pump and three-phase electrical system
Tablet touchscreen 7”
Operating System Android