Eco Friendly Tiles - Shannon Range - Tray 10
50
Eco Friendly Tiles Ltd Ground Floor, Solon House 40a Peterborough Road London SW6 3BN 0844 980 2233 [email protected] ecofriendlytiles.co.uk SHANNON RANGE Tray 11 - Product Sheets - Technical Performance Data For most up to date information see : www.ecofriendlytiles.co.uk
-
Upload
eco-friendly-tiles -
Category
Documents
-
view
227 -
download
5
description
Product sheets and technical performance data for Shannon Range, Tray 10
Transcript of Eco Friendly Tiles - Shannon Range - Tray 10
Eco Friendly Tiles LtdGround Floor, Solon House40a Peterborough RoadLondonSW6 3BN
0844 980 2233 [email protected]
SHANNON RANGE
Tray 11- Product Sheets - Technical Performance Data
For most up to date information see :www.ecofriendlytiles.co.uk
Eco Friendly Tiles LtdGround Floor, Solon House40a Peterborough RoadLondonSW6 3BN
0844 980 2233 [email protected]
www.ecofriendlytiles.co.uk
FOR OFFICE USE ONLY
Large FormatBREEAM/LEEDMarble & Stone
5.6mm Floor / Wall / Overlay / Facade
1m
1m
1.5m
1m3m
1m
CarbonOffset
ChemicalResistant
FrostResistant
Morecolours
available
Thermal Shock
Resistant
PTV 40+Upon
Request
30% BREEAM LEED SKA R10
Properties
Other finishes available
Sizes available Thickness available
Natural
Ultra-thin - from just 3.5mm - yet so strong it can be laid in 3m x 1m slabs on facades, floors and walls or as an overlay. With low embodied carbon, up to 40% pre-
consumer recycled content, flexible sizes and over one hundred colours and finishes, it’s time to join the surface revolution. And with LEED accreditation, Ska approval
and pending LCA and EPD certification, it’s a range perfectly in step with 21st century living.
To see the full range or download the Brochure, visit: www.ecofriendlytiles.co.uk/eco/surface-brochure
11.1.A(2)
Eco Friendly Tiles / Shannon Range / Tray 11
Eco Friendly Tiles / Shannon Range / Tray 11
Technical SpecificationCode: 11.1.A(2)
Physical & chemical properties Norm/test method Shannon 5.6mm
Straightness of sides ISO 10545-2 Max. deviation on the side +/- 0.5mm
Flatness ISO 10545-2 Max. deviation on the diagonal +/- 1.0mm
Weight Factory Average value 14kg/m2
Surface quality/% of tiles with no visible flaws IS0 10545-2 >95%
Water absorption ISO 10545-3 Average value 0.1% (<0.3%)
ASTM C373 Average value 0.1% (<0.3%)
Breaking load in N / samples 200x300mm ISO 10545-4 Average value 1100
Bending strength in N/mm2 ISO 10454-4 Average value 50 (sample dimensions 200x300mm)
Mohs scale hardness UNI EN 101 Average Value 6
Resistance to deep abrasion ISO 10545-6 ≤175mm3
Coefficient of linear thermal expansion / 10-6 / 0C ISO 10545-8 6.6
Resistance to thermal shock ISO 10545-9 Resistant
Chemical resistance ISO 10545-13 No visible effect
Stain resistance ISO 10545-14 Class 5
Frost resistance ISO 10545-12 Resistant
Shock resistance ISO 10545-5 On demand
Coefficient of friction ASTM C-1028 µ > 0.6 (in dry conditions)
DIN 51130 R10
ANSI A137.1 (DCOF) ≥ 0.42
Fire reaction EN 13501 (rev. 2005) A1 (decision 96/603/ce as amended)
Eco Friendly Tiles LtdGround Floor, Solon House40a Peterborough RoadLondonSW6 3BN
0844 980 2233 [email protected]
This technical information sheet is not a guarantee of performance and is not a warranty, either explicit or implicit. Rather, it tries to summarize for the designer, installer or developer the technical data provided to Eco Friendly Tiles by the independent tile manufac-turer. This information may not be applicable in all geographical areas. It is the responsibility of those individuals who are referring to this document to independently research and determine which tiles are suitable for a given project according to applicable British or International Standards and any governing legislative requirements. This document cannot be used as expert opinion, evidence or in any legal or administrative procedure unless authorized by Eco Friendly Tiles Ltd.
Certifications
30%
Pre-Consumer Recycled Content
LEEDContributes to Contributes to
Eco Friendly Tiles LtdGround Floor, Solon House40a Peterborough RoadLondonSW6 3BN
0844 980 2233 [email protected]
www.ecofriendlytiles.co.uk
FOR OFFICE USE ONLYLarge FormatBREEAM/LEEDWood Look
3.5mm Wall
1m
1m
1.5m
1m3m
1m
CarbonOffset
ChemicalResistant
FrostResistant
Morecolours
available
Thermal Shock
Resistant
PTV 40+Upon
Request
40% BREEAM LEED SKA R10
Properties
Other finishes available
Sizes available Thickness available
Natural
Ultra-thin - from just 3.5mm - yet so strong it can be laid in 3m x 1m slabs on facades, floors and walls or as an overlay. With low embodied carbon, up to 40% pre-
consumer recycled content, flexible sizes and over one hundred colours and finishes, it’s time to join the surface revolution. And with LEED accreditation, Ska approval
and pending LCA and EPD certification, it’s a range perfectly in step with 21st century living.
To see the full range or download the Brochure, visit: www.ecofriendlytiles.co.uk/eco/surface-brochure
11.1.B
Eco Friendly Tiles / Shannon Range / Tray 11
Eco Friendly Tiles / Shannon Range / Tray 11
Technical SpecificationCode: 11.1.B
Physical & chemical properties Norm/test method Shannon 3.5mm (wall only)
Size ISO 10545-2 Max. deviation on the side +/- 0.5mm
Size ISO 10545-2 Max. deviation on the side +/- 1.0mm
Weight Factory Average value 8.2kg/m2
Surface quality/% of tiles with no visible flaws IS0 10545-2 >95%
Water absorption ISO 10545-3 Average value 0.1% (0.3%)
ASTM C373 Average value 0.1% (0.3%)
Breaking load in N / samples 200x300mm ISO 10545-4 Average value 700
Bending strength in N/mm2 ISO 10454-4 Average value 50 (sample dimensions 200x300mm)
Mohs scale hardness UNI EN 101 Average Value 6
Coefficient of linear thermal expansion / 10-6 / 0C ISO 10545-8 6.6
Resistance to thermal shock ISO 10545-9 Resistant
Chemical resistance ISO 10545-13 No visible effect
Stain resistance ISO 10545-14 Class 5
Frost resistance ISO 10545-12 Resistant
Shock resistance ISO 10545-5 On Demand
Coefficient of friction ASTM C-1028 -
DIN 51130 -
ANSI A137.1 (DCOF) -
Fire reaction EN 13501 (rev. 2005) A2 – s1,d0
Eco Friendly Tiles LtdGround Floor, Solon House40a Peterborough RoadLondonSW6 3BN
0844 980 2233 [email protected]
This technical information sheet is not a guarantee of performance and is not a warranty, either explicit or implicit. Rather, it tries to summarize for the designer, installer or developer the technical data provided to Eco Friendly Tiles by the independent tile manufac-turer. This information may not be applicable in all geographical areas. It is the responsibility of those individuals who are referring to this document to independently research and determine which tiles are suitable for a given project according to applicable British or International Standards and any governing legislative requirements. This document cannot be used as expert opinion, evidence or in any legal or administrative procedure unless authorized by Eco Friendly Tiles Ltd.
Certifications
40%
Pre-Consumer Recycled Content
LEEDContributes to Contributes to
Eco Friendly Tiles LtdGround Floor, Solon House40a Peterborough RoadLondonSW6 3BN
0844 980 2233 [email protected]
www.ecofriendlytiles.co.uk
FOR OFFICE USE ONLYLarge FormatBREEAM/LEEDWood Look
3.5mm Wall
1m
1m
1.5m
1m3m
1m
CarbonOffset
ChemicalResistant
FrostResistant
Morecolours
available
Thermal Shock
Resistant
PTV 40+Upon
Request
40% BREEAM LEED SKA R10
Properties
Other finishes available
Sizes available Thickness available
Natural
Ultra-thin - from just 3.5mm - yet so strong it can be laid in 3m x 1m slabs on facades, floors and walls or as an overlay. With low embodied carbon, up to 40% pre-
consumer recycled content, flexible sizes and over one hundred colours and finishes, it’s time to join the surface revolution. And with LEED accreditation, Ska approval
and pending LCA and EPD certification, it’s a range perfectly in step with 21st century living.
To see the full range or download the Brochure, visit: www.ecofriendlytiles.co.uk/eco/surface-brochure
11.1.C
Eco Friendly Tiles / Shannon Range / Tray 11
Eco Friendly Tiles / Shannon Range / Tray 11
Technical SpecificationCode: 11.1.C
Physical & chemical properties Norm/test method Shannon 3.5mm (wall only)
Straightness of sides ISO 10545-2 Max. deviation on the side +/- 0.5mm
Flatness ISO 10545-2 Max. deviation on the diagonal +/- 1.0mm
Weight Factory Average value 8.2kg/m2
Surface quality/% of tiles with no visible flaws IS0 10545-2 >95%
Water absorption ISO 10545-3 Average value 0.1% (0.3%)
ASTM C373 Average value 0.1% (0.3%)
Breaking load in N / samples 200x300mm* ISO 10545-4 Average value 700
Bending strength in N/mm2 ISO 10454-4 Average value 50 (sample dimensions 200x300mm)
Mohs scale hardness UNI EN 101 Average Value 6
Coefficient of linear thermal expansion / 10-6 / 0C ISO 10545-8 6.6
Resistance to thermal shock ISO 10545-9 Resistant
Chemical resistance ISO 10545-13 No visible effect
Stain resistance ISO 10545-14 Class 5
Frost resistance ISO 10545-12 Resistant
Shock resistance ISO 10545-5 On Demand
Coefficient of friction ASTM C-1028 -
DIN 51130 -
ANSI A137.1 (DCOF) -
Fire reaction EN 13501 (rev. 2005) A2 – s1,d0
Eco Friendly Tiles LtdGround Floor, Solon House40a Peterborough RoadLondonSW6 3BN
0844 980 2233 [email protected]
This technical information sheet is not a guarantee of performance and is not a warranty, either explicit or implicit. Rather, it tries to summarize for the designer, installer or developer the technical data provided to Eco Friendly Tiles by the independent tile manufac-turer. This information may not be applicable in all geographical areas. It is the responsibility of those individuals who are referring to this document to independently research and determine which tiles are suitable for a given project according to applicable British or International Standards and any governing legislative requirements. This document cannot be used as expert opinion, evidence or in any legal or administrative procedure unless authorized by Eco Friendly Tiles Ltd.
Certifications
40%
Pre-Consumer Recycled Content
LEEDContributes to Contributes to
Eco Friendly Tiles LtdGround Floor, Solon House40a Peterborough RoadLondonSW6 3BN
0844 980 2233 [email protected]
www.ecofriendlytiles.co.uk
FOR OFFICE USE ONLYLarge FormatBREEAM/LEEDWood Look
3.5mm Wall
1m
1m
1.5m
1m3m
1m
CarbonOffset
ChemicalResistant
FrostResistant
Morecolours
available
Thermal Shock
Resistant
PTV 40+Upon
Request
40% BREEAM LEED SKA R10
Properties
Other finishes available
Sizes available Thickness available
Natural
Ultra-thin - from just 3.5mm - yet so strong it can be laid in 3m x 1m slabs on facades, floors and walls or as an overlay. With low embodied carbon, up to 40% pre-
consumer recycled content, flexible sizes and over one hundred colours and finishes, it’s time to join the surface revolution. And with LEED accreditation, Ska approval
and pending LCA and EPD certification, it’s a range perfectly in step with 21st century living.
To see the full range or download the Brochure, visit: www.ecofriendlytiles.co.uk/eco/surface-brochure
11.1.D
Eco Friendly Tiles / Shannon Range / Tray 11
Eco Friendly Tiles / Shannon Range / Tray 11
Technical SpecificationCode: 11.1.D
Physical & chemical properties Norm/test method Shannon 3.5mm (wall only)
Straightness of sides ISO 10545-2 Max. deviation on the side +/- 0.5mm
Flatness ISO 10545-2 Max. deviation on the diagonal +/- 1.0mm
Weight Factory Average value 8.2kg/m2
Surface quality/% of tiles with no visible flaws IS0 10545-2 >95%
Water absorption ISO 10545-3 Average value 0.1% (0.3%)
ASTM C373 Average value 0.1% (0.3%)
Breaking load in N / samples 200x300mm ISO 10545-4 Average value 700
Bending strength in N/mm2 ISO 10454-4 Average value 50 (sample dimensions 200x300mm)
Mohs scale hardness UNI EN 101 Average Value 6
Coefficient of linear thermal expansion / 10-6 / 0C ISO 10545-8 6.6
Resistance to thermal shock ISO 10545-9 Resistant
Chemical resistance ISO 10545-13 No visible effect
Stain resistance ISO 10545-14 Class 5
Frost resistance ISO 10545-12 Resistant
Shock resistance ISO 10545-5 On Demand
Coefficient of friction ASTM C-1028 -
DIN 51130 -
ANSI A137.1 (DCOF) -
Fire reaction EN 13501 (rev. 2005) A2 – s1,d0
Eco Friendly Tiles LtdGround Floor, Solon House40a Peterborough RoadLondonSW6 3BN
0844 980 2233 [email protected]
This technical information sheet is not a guarantee of performance and is not a warranty, either explicit or implicit. Rather, it tries to summarize for the designer, installer or developer the technical data provided to Eco Friendly Tiles by the independent tile manufac-turer. This information may not be applicable in all geographical areas. It is the responsibility of those individuals who are referring to this document to independently research and determine which tiles are suitable for a given project according to applicable British or International Standards and any governing legislative requirements. This document cannot be used as expert opinion, evidence or in any legal or administrative procedure unless authorized by Eco Friendly Tiles Ltd.
Certifications
40%
Pre-Consumer Recycled Content
LEEDContributes to Contributes to
Eco Friendly Tiles LtdGround Floor, Solon House40a Peterborough RoadLondonSW6 3BN
0844 980 2233 [email protected]
www.ecofriendlytiles.co.uk
FOR OFFICE USE ONLYLarge FormatBREEAM/LEEDMarble & Stone
5.6mm Floor / Wall / Overlay / Facade
1m
1m
1.5m
1m3m
1m
CarbonOffset
ChemicalResistant
FrostResistant
Morecolours
available
Thermal Shock
Resistant
PTV 40+Upon
Request
40% BREEAM LEED SKA R10
Properties
Other finishes available
Sizes available Thickness available
Natural
Ultra-thin - from just 3.5mm - yet so strong it can be laid in 3m x 1m slabs on facades, floors and walls or as an overlay. With low embodied carbon, up to 40% pre-
consumer recycled content, flexible sizes and over one hundred colours and finishes, it’s time to join the surface revolution. And with LEED accreditation, Ska approval
and pending LCA and EPD certification, it’s a range perfectly in step with 21st century living.
To see the full range or download the Brochure, visit: www.ecofriendlytiles.co.uk/eco/surface-brochure
11.1.E(2)
Eco Friendly Tiles / Shannon Range / Tray 11
Eco Friendly Tiles / Shannon Range / Tray 11
Technical SpecificationCode: 11.1.E(2)
Physical & chemical properties Norm/test method Shannon 5.6mm
Straightness of sides ISO 10545-2 Max. deviation on the side +/- 0.5mm
Flatness ISO 10545-2 Max. deviation on the diagonal +/- 1.0mm
Weight Factory Average value 14kg/m2
Surface quality/% of tiles with no visible flaws IS0 10545-2 >95%
Water absorption ISO 10545-3 Average value 0.1% (<0.3%)
ASTM C373 Average value 0.1% (<0.3%)
Breaking load in N / samples 200x300mm ISO 10545-4 Average value 1100
Bending strength in N/mm2 ISO 10454-4 Average value 50 (sample dimensions 200x300mm)
Mohs scale hardness UNI EN 101 Average Value 6
Resistance to deep abrasion ISO 10545-6 ≤175mm3
Coefficient of linear thermal expansion / 10-6 / 0C ISO 10545-8 6.6
Resistance to thermal shock ISO 10545-9 Resistant
Chemical resistance ISO 10545-13 No visible effect
Stain resistance ISO 10545-14 Class 5
Frost resistance ISO 10545-12 Resistant
Shock resistance ISO 10545-5 On demand
Coefficient of friction ASTM C-1028 µ > 0.6 (in dry conditions)
DIN 51130 R10
ANSI A137.1 (DCOF) ≥ 0.42
Fire reaction EN 13501 (rev. 2005) A1 (decision 96/603/ce as amended)
Eco Friendly Tiles LtdGround Floor, Solon House40a Peterborough RoadLondonSW6 3BN
0844 980 2233 [email protected]
This technical information sheet is not a guarantee of performance and is not a warranty, either explicit or implicit. Rather, it tries to summarize for the designer, installer or developer the technical data provided to Eco Friendly Tiles by the independent tile manufac-turer. This information may not be applicable in all geographical areas. It is the responsibility of those individuals who are referring to this document to independently research and determine which tiles are suitable for a given project according to applicable British or International Standards and any governing legislative requirements. This document cannot be used as expert opinion, evidence or in any legal or administrative procedure unless authorized by Eco Friendly Tiles Ltd.
Certifications
40%
Pre-Consumer Recycled Content
LEEDContributes to Contributes to
Eco Friendly Tiles LtdGround Floor, Solon House40a Peterborough RoadLondonSW6 3BN
0844 980 2233 [email protected]
www.ecofriendlytiles.co.uk
FOR OFFICE USE ONLYLarge FormatBREEAM/LEEDWood Look
1m
1m
1.5m
1m3m
1m
CarbonOffset
ChemicalResistant
FrostResistant
Morecolours
available
Thermal Shock
Resistant
PTV 40+Upon
Request
30% BREEAM LEED SKA R10
5.6mm Floor / Wall / Overlay / Facade
Properties
Other finishes available
Sizes available Thickness available
Natural
Ultra-thin - from just 3.5mm - yet so strong it can be laid in 3m x 1m slabs on facades, floors and walls or as an overlay. With low embodied carbon, up to 40% pre-
consumer recycled content, flexible sizes and over one hundred colours and finishes, it’s time to join the surface revolution. And with LEED accreditation, Ska approval
and pending LCA and EPD certification, it’s a range perfectly in step with 21st century living.
To see the full range or download the Brochure, visit: www.ecofriendlytiles.co.uk/eco/surface-brochure
11.2.A
Eco Friendly Tiles / Shannon Range / Tray 11
Eco Friendly Tiles / Shannon Range / Tray 11
Technical SpecificationCode: 11.2.A
Physical & chemical properties Norm/test method Shannon 5.6mm
Straightness of sides ISO 10545-2 Max. deviation on the side +/- 0.5mm
Flatness ISO 10545-2 Max. deviation on the diagonal +/- 1.0mm
Weight Factory Average value 14kg/m2
Surface quality/% of tiles with no visible flaws IS0 10545-2 >95%
Water absorption ISO 10545-3 Average value 0.1% (<0.3%)
ASTM C373 Average value 0.1% (<0.3%)
Breaking load in N / samples 200x300mm ISO 10545-4 Average value 1100
Bending strength in N/mm2 ISO 10454-4 Average value 50 (sample dimensions 200x300mm)
Mohs scale hardness UNI EN 101 Average Value 6
Resistance to deep abrasion ISO 10545-6 ≤175mm3
Coefficient of linear thermal expansion / 10-6 / 0C ISO 10545-8 6.6
Resistance to thermal shock ISO 10545-9 Resistant
Chemical resistance ISO 10545-13 No visible effect
Stain resistance ISO 10545-14 Class 5
Frost resistance ISO 10545-12 Resistant
Shock resistance ISO 10545-5 On demand
Coefficient of friction ASTM C-1028 µ > 0.6 (in dry conditions)
DIN 51130 R10
ANSI A137.1 (DCOF) ≥ 0.42
Fire reaction EN 13501 (rev. 2005) A1 (decision 96/603/ce as amended)
Eco Friendly Tiles LtdGround Floor, Solon House40a Peterborough RoadLondonSW6 3BN
0844 980 2233 [email protected]
This technical information sheet is not a guarantee of performance and is not a warranty, either explicit or implicit. Rather, it tries to summarize for the designer, installer or developer the technical data provided to Eco Friendly Tiles by the independent tile manufac-turer. This information may not be applicable in all geographical areas. It is the responsibility of those individuals who are referring to this document to independently research and determine which tiles are suitable for a given project according to applicable British or International Standards and any governing legislative requirements. This document cannot be used as expert opinion, evidence or in any legal or administrative procedure unless authorized by Eco Friendly Tiles Ltd.
Certifications
30%
Pre-Consumer Recycled Content
LEEDContributes to Contributes to
Eco Friendly Tiles LtdGround Floor, Solon House40a Peterborough RoadLondonSW6 3BN
0844 980 2233 [email protected]
www.ecofriendlytiles.co.uk
FOR OFFICE USE ONLYLarge FormatBREEAM/LEEDWood Look
5.6mm Floor / Wall / Overlay / Facade
1m
1m
1.5m
1m3m
1m
CarbonOffset
ChemicalResistant
FrostResistant
Morecolours
available
Thermal Shock
Resistant
PTV 40+Upon
Request
40% BREEAM LEED SKA R10
Properties
Other finishes available
Sizes available Thickness available
Natural
Ultra-thin - from just 3.5mm - yet so strong it can be laid in 3m x 1m slabs on facades, floors and walls or as an overlay. With low embodied carbon, up to 40% pre-
consumer recycled content, flexible sizes and over one hundred colours and finishes, it’s time to join the surface revolution. And with LEED accreditation, Ska approval
and pending LCA and EPD certification, it’s a range perfectly in step with 21st century living.
To see the full range or download the Brochure, visit: www.ecofriendlytiles.co.uk/eco/surface-brochure
11.2.B
Eco Friendly Tiles / Shannon Range / Tray 11
Eco Friendly Tiles / Shannon Range / Tray 11
Technical SpecificationCode: 11.2.B
Physical & chemical properties Norm/test method Shannon 5.6mm
Straightness of sides ISO 10545-2 Max. deviation on the side +/- 0.5mm
Flatness ISO 10545-2 Max. deviation on the diagonal +/- 1.0mm
Weight Factory Average value 14kg/m2
Surface quality/% of tiles with no visible flaws IS0 10545-2 >95%
Water absorption ISO 10545-3 Average value 0.1% (<0.3%)
ASTM C373 Average value 0.1% (<0.3%)
Breaking load in N / samples 200x300mm ISO 10545-4 Average value 1100
Bending strength in N/mm2 ISO 10454-4 Average value 50 (sample dimensions 200x300mm)
Mohs scale hardness UNI EN 101 Average Value 6
Resistance to deep abrasion ISO 10545-6 ≤175mm3
Coefficient of linear thermal expansion / 10-6 / 0C ISO 10545-8 6.6
Resistance to thermal shock ISO 10545-9 Resistant
Chemical resistance ISO 10545-13 No visible effect
Stain resistance ISO 10545-14 Class 5
Frost resistance ISO 10545-12 Resistant
Shock resistance ISO 10545-5 On demand
Coefficient of friction ASTM C-1028 µ > 0.6 (in dry conditions)
DIN 51130 R10
ANSI A137.1 (DCOF) ≥ 0.42
Fire reaction EN 13501 (rev. 2005) A1 (decision 96/603/ce as amended)
Eco Friendly Tiles LtdGround Floor, Solon House40a Peterborough RoadLondonSW6 3BN
0844 980 2233 [email protected]
This technical information sheet is not a guarantee of performance and is not a warranty, either explicit or implicit. Rather, it tries to summarize for the designer, installer or developer the technical data provided to Eco Friendly Tiles by the independent tile manufac-turer. This information may not be applicable in all geographical areas. It is the responsibility of those individuals who are referring to this document to independently research and determine which tiles are suitable for a given project according to applicable British or International Standards and any governing legislative requirements. This document cannot be used as expert opinion, evidence or in any legal or administrative procedure unless authorized by Eco Friendly Tiles Ltd.
Certifications
40%
Pre-Consumer Recycled Content
LEEDContributes to Contributes to
Eco Friendly Tiles LtdGround Floor, Solon House40a Peterborough RoadLondonSW6 3BN
0844 980 2233 [email protected]
www.ecofriendlytiles.co.uk
FOR OFFICE USE ONLYLarge FormatBREEAM/LEEDWood Look
High Slip
5.6mm Floor / Wall / Overlay / Facade
1m
1m
1.5m
1m3m
1m
CarbonOffset
ChemicalResistant
FrostResistant
Morecolours
available
Thermal Shock
Resistant
PTV 40+Upon
Request
40% BREEAM LEED SKA R10
Properties
Other finishes available
Sizes available Thickness available
Natural
Ultra-thin - from just 3.5mm - yet so strong it can be laid in 3m x 1m slabs on facades, floors and walls or as an overlay. With low embodied carbon, up to 40% pre-
consumer recycled content, flexible sizes and over one hundred colours and finishes, it’s time to join the surface revolution. And with LEED accreditation, Ska approval
and pending LCA and EPD certification, it’s a range perfectly in step with 21st century living.
To see the full range or download the Brochure, visit: www.ecofriendlytiles.co.uk/eco/surface-brochure
11.2.C
Eco Friendly Tiles / Shannon Range / Tray 11
Eco Friendly Tiles / Shannon Range / Tray 11
Technical SpecificationCode: 11.2.C
Physical & chemical properties Norm/test method Shannon 5.6mm
Straightness of sides ISO 10545-2 Max. deviation on the side +/- 0.5mm
Flatness ISO 10545-2 Max. deviation on the diagonal +/- 1.0mm
Weight Factory Average value 14kg/m2
Surface quality/% of tiles with no visible flaws IS0 10545-2 >95%
Water absorption ISO 10545-3 Average value 0.1% (<0.3%)
ASTM C373 Average value 0.1% (<0.3%)
Breaking load in N / samples 200x300mm ISO 10545-4 Average value 1100
Bending strength in N/mm2 ISO 10454-4 Average value 50 (sample dimensions 200x300mm)
Mohs scale hardness UNI EN 101 Average Value 6
Resistance to deep abrasion ISO 10545-6 ≤175mm3
Coefficient of linear thermal expansion / 10-6 / 0C ISO 10545-8 6.6
Resistance to thermal shock ISO 10545-9 Resistant
Chemical resistance ISO 10545-13 No visible effect
Stain resistance ISO 10545-14 Class 5
Frost resistance ISO 10545-12 Resistant
Shock resistance ISO 10545-5 On demand
Coefficient of friction ASTM C-1028 µ > 0.6 (in dry conditions)
DIN 51130 R10
ANSI A137.1 (DCOF) ≥ 0.42
Fire reaction EN 13501 (rev. 2005) A1 (decision 96/603/ce as amended)
Eco Friendly Tiles LtdGround Floor, Solon House40a Peterborough RoadLondonSW6 3BN
0844 980 2233 [email protected]
This technical information sheet is not a guarantee of performance and is not a warranty, either explicit or implicit. Rather, it tries to summarize for the designer, installer or developer the technical data provided to Eco Friendly Tiles by the independent tile manufac-turer. This information may not be applicable in all geographical areas. It is the responsibility of those individuals who are referring to this document to independently research and determine which tiles are suitable for a given project according to applicable British or International Standards and any governing legislative requirements. This document cannot be used as expert opinion, evidence or in any legal or administrative procedure unless authorized by Eco Friendly Tiles Ltd.
Certifications
40%
Pre-Consumer Recycled Content
LEEDContributes to Contributes to
Eco Friendly Tiles LtdGround Floor, Solon House40a Peterborough RoadLondonSW6 3BN
0844 980 2233 [email protected]
www.ecofriendlytiles.co.uk
FOR OFFICE USE ONLYLarge FormatBREEAM/LEEDWood Look
High Slip
5.6mm Floor / Wall / Overlay / Facade
1m
1m
1.5m
1m3m
1m
CarbonOffset
ChemicalResistant
FrostResistant
Morecolours
available
Thermal Shock
Resistant
PTV 40+Upon
Request
40% BREEAM LEED SKA R10
Properties
Other finishes available
Sizes available Thickness available
Natural
Ultra-thin - from just 3.5mm - yet so strong it can be laid in 3m x 1m slabs on facades, floors and walls or as an overlay. With low embodied carbon, up to 40% pre-
consumer recycled content, flexible sizes and over one hundred colours and finishes, it’s time to join the surface revolution. And with LEED accreditation, Ska approval
and pending LCA and EPD certification, it’s a range perfectly in step with 21st century living.
To see the full range or download the Brochure, visit: www.ecofriendlytiles.co.uk/eco/surface-brochure
11.2.D
Eco Friendly Tiles / Shannon Range / Tray 11
Eco Friendly Tiles / Shannon Range / Tray 11
Technical SpecificationCode: 11.2.D
Physical & chemical properties Norm/test method Shannon 5.6mm
Straightness of sides ISO 10545-2 Max. deviation on the side +/- 0.5mm
Flatness ISO 10545-2 Max. deviation on the diagonal +/- 1.0mm
Weight Factory Average value 14kg/m2
Surface quality/% of tiles with no visible flaws IS0 10545-2 >95%
Water absorption ISO 10545-3 Average value 0.1% (<0.3%)
ASTM C373 Average value 0.1% (<0.3%)
Breaking load in N / samples 200x300mm ISO 10545-4 Average value 1100
Bending strength in N/mm2 ISO 10454-4 Average value 50 (sample dimensions 200x300mm)
Mohs scale hardness UNI EN 101 Average Value 6
Resistance to deep abrasion ISO 10545-6 ≤175mm3
Coefficient of linear thermal expansion / 10-6 / 0C ISO 10545-8 6.6
Resistance to thermal shock ISO 10545-9 Resistant
Chemical resistance ISO 10545-13 No visible effect
Stain resistance ISO 10545-14 Class 5
Frost resistance ISO 10545-12 Resistant
Shock resistance ISO 10545-5 On demand
Coefficient of friction ASTM C-1028 µ > 0.6 (in dry conditions)
DIN 51130 R10
ANSI A137.1 (DCOF) ≥ 0.42
Fire reaction EN 13501 (rev. 2005) A1 (decision 96/603/ce as amended)
Eco Friendly Tiles LtdGround Floor, Solon House40a Peterborough RoadLondonSW6 3BN
0844 980 2233 [email protected]
This technical information sheet is not a guarantee of performance and is not a warranty, either explicit or implicit. Rather, it tries to summarize for the designer, installer or developer the technical data provided to Eco Friendly Tiles by the independent tile manufac-turer. This information may not be applicable in all geographical areas. It is the responsibility of those individuals who are referring to this document to independently research and determine which tiles are suitable for a given project according to applicable British or International Standards and any governing legislative requirements. This document cannot be used as expert opinion, evidence or in any legal or administrative procedure unless authorized by Eco Friendly Tiles Ltd.
Certifications
40%
Pre-Consumer Recycled Content
LEEDContributes to Contributes to
Eco Friendly Tiles LtdGround Floor, Solon House40a Peterborough RoadLondonSW6 3BN
0844 980 2233 [email protected]
www.ecofriendlytiles.co.uk
FOR OFFICE USE ONLYLarge FormatBREEAM/LEEDMarble & Stone
Polished/Semi-Polished
5.6mm Floor / Wall / Overlay / Facade
1m
1m
1.5m
1m3m
1m
CarbonOffset
ChemicalResistant
FrostResistant
Morecolours
available
Thermal Shock
Resistant
PTV 40+Upon
Request
30% BREEAM LEED SKA
Properties
Other finishes available
Sizes available Thickness available
Polished
Ultra-thin - from just 3.5mm - yet so strong it can be laid in 3m x 1m slabs on facades, floors and walls or as an overlay. With low embodied carbon, up to 40% pre-
consumer recycled content, flexible sizes and over one hundred colours and finishes, it’s time to join the surface revolution. And with LEED accreditation, Ska approval
and pending LCA and EPD certification, it’s a range perfectly in step with 21st century living.
To see the full range or download the Brochure, visit: www.ecofriendlytiles.co.uk/eco/surface-brochure
11.2.E P
Eco Friendly Tiles / Shannon Range / Tray 11
Eco Friendly Tiles / Shannon Range / Tray 11
Technical SpecificationCode: 11.2.E Polished
Physical & chemical properties Norm/test method Shannon 5.6mm
Straightness of sides ISO 10545-2 Max. deviation on the side +/- 0.5mm
Flatness ISO 10545-2 Max. deviation on the diagonal +/- 1.0mm
Weight Factory Average value 14kg/m2
Surface quality/% of tiles with no visible flaws IS0 10545-2 >95%
Water absorption ISO 10545-3 Average value 0.1% (<0.3%)
ASTM C373 Average value 0.1% (<0.3%)
Breaking load in N / samples 200x300mm ISO 10545-4 Average value 1100
Bending strength in N/mm2 ISO 10454-4 Average value 50 (sample dimensions 200x300mm)
Mohs scale hardness UNI EN 101 Average Value 5
Resistance to deep abrasion ISO 10545-6 ≤175mm3
Coefficient of linear thermal expansion / 10-6 / 0C ISO 10545-8 6.6
Resistance to thermal shock ISO 10545-9 Resistant
Chemical resistance ISO 10545-13 Partial change to surface appearance
Stain resistance ISO 10545-14 Class 2
Frost resistance ISO 10545-12 Resistant
Shock resistance ISO 10545-5 On demand
Fire reaction EN 13501 (rev. 2005) A1 (decision 96/603/ce as amended)
Eco Friendly Tiles LtdGround Floor, Solon House40a Peterborough RoadLondonSW6 3BN
0844 980 2233 [email protected]
This technical information sheet is not a guarantee of performance and is not a warranty, either explicit or implicit. Rather, it tries to summarize for the designer, installer or developer the technical data provided to Eco Friendly Tiles by the independent tile manufac-turer. This information may not be applicable in all geographical areas. It is the responsibility of those individuals who are referring to this document to independently research and determine which tiles are suitable for a given project according to applicable British or International Standards and any governing legislative requirements. This document cannot be used as expert opinion, evidence or in any legal or administrative procedure unless authorized by Eco Friendly Tiles Ltd.
Certifications
30%
Pre-Consumer Recycled Content
LEEDContributes to Contributes to
Eco Friendly Tiles LtdGround Floor, Solon House40a Peterborough RoadLondonSW6 3BN
0844 980 2233 [email protected]
www.ecofriendlytiles.co.uk
FOR OFFICE USE ONLYLarge FormatBREEAM/LEEDMetallic
3.5mm Wall
1m
1m
1.5m
1m3m
1m
CarbonOffset
ChemicalResistant
FrostResistant
Morecolours
available
Thermal Shock
Resistant
PTV 40+Upon
Request
30% BREEAM LEED SKA
Properties
Other finishes available
Sizes available Thickness available
Natural
Ultra-thin - from just 3.5mm - yet so strong it can be laid in 3m x 1m slabs on facades, floors and walls or as an overlay. With low embodied carbon, up to 40% pre-
consumer recycled content, flexible sizes and over one hundred colours and finishes, it’s time to join the surface revolution. And with LEED accreditation, Ska approval
and pending LCA and EPD certification, it’s a range perfectly in step with 21st century living.
To see the full range or download the Brochure, visit: www.ecofriendlytiles.co.uk/eco/surface-brochure
11.3.A(2)
Eco Friendly Tiles / Shannon Range / Tray 11
Eco Friendly Tiles / Shannon Range / Tray 11
Technical SpecificationCode: 11.3.A(2)
Physical & chemical properties Norm/test method Shannon 3.5mm
Straightness of sides ISO 10545-2 Max. deviation on the side +/- 0.5mm
Flatness ISO 10545-2 Max. deviation on the diagonals +/- 1.0mm
Weight Factory Average value 8.2kg/m2
Surface quality/% of tiles with no visible flaws IS0 10545-2 >95%
Water absorption ISO 10545-3 Average value 0.1% (0.3%)
ASTM C373 Average value 0.1% (0.3%)
Breaking load in N / samples 200x300mm ISO 10545-4 Average value 700
Bending strength in N/mm2 ISO 10454-4 Average value 50 (sample dimensions 200x300mm)
Mohs scale hardness UNI EN 101 Average Value 5
Coefficient of linear thermal expansion / 10-6 / 0C ISO 10545-8 6.6
Resistance to thermal shock ISO 10545-9 Resistant
Chemical resistance ISO 10545-13 No visible effect
Stain resistance ISO 10545-14 Class 4 - 5
Frost resistance ISO 10545-12 Resistant
Shock resistance ISO 10545-5 On Demand
Coefficient of friction ASTM C-1028 -
DIN 51130 -
ANSI A137.1 (DCOF) -
Fire reaction EN 13501 (rev. 2005) A2 – s1,d0
Eco Friendly Tiles LtdGround Floor, Solon House40a Peterborough RoadLondonSW6 3BN
0844 980 2233 [email protected]
This technical information sheet is not a guarantee of performance and is not a warranty, either explicit or implicit. Rather, it tries to summarize for the designer, installer or developer the technical data provided to Eco Friendly Tiles by the independent tile manufac-turer. This information may not be applicable in all geographical areas. It is the responsibility of those individuals who are referring to this document to independently research and determine which tiles are suitable for a given project according to applicable British or International Standards and any governing legislative requirements. This document cannot be used as expert opinion, evidence or in any legal or administrative procedure unless authorized by Eco Friendly Tiles Ltd.
Certifications
30%
Pre-Consumer Recycled Content
LEEDContributes to Contributes to
Eco Friendly Tiles LtdGround Floor, Solon House40a Peterborough RoadLondonSW6 3BN
0844 980 2233 [email protected]
www.ecofriendlytiles.co.uk
FOR OFFICE USE ONLYLarge FormatBREEAM/LEEDMetallic
3.5mm Wall
1m
1m
1.5m
1m3m
1m
CarbonOffset
ChemicalResistant
FrostResistant
Morecolours
available
Thermal Shock
Resistant
PTV 40+Upon
Request
40% BREEAM LEED SKA
Properties
Other finishes available
Sizes available Thickness available
Natural
Ultra-thin - from just 3.5mm - yet so strong it can be laid in 3m x 1m slabs on facades, floors and walls or as an overlay. With low embodied carbon, up to 40% pre-
consumer recycled content, flexible sizes and over one hundred colours and finishes, it’s time to join the surface revolution. And with LEED accreditation, Ska approval
and pending LCA and EPD certification, it’s a range perfectly in step with 21st century living.
To see the full range or download the Brochure, visit: www.ecofriendlytiles.co.uk/eco/surface-brochure
11.3.B(2)
Eco Friendly Tiles / Shannon Range / Tray 11
Eco Friendly Tiles / Shannon Range / Tray 11
Technical SpecificationCode: 11.3.B(2)
Physical & chemical properties Norm/test method Shannon 3.5mm (wall only)
Straightness of sides ISO 10545-2 Max. deviation on the side +/- 0.5mm
Flatness ISO 10545-2 Max. deviation on the diagonal +/- 1.0mm
Weight Factory Average value 8.2kg/m2
Surface quality/% of tiles with no visible flaws IS0 10545-2 >95%
Water absorption ISO 10545-3 Average value 0.1% (0.3%)
ASTM C373 Average value 0.1% (0.3%)
Breaking load in N / samples 200x300mm* ISO 10545-4 Average value 700
Bending strength in N/mm2 ISO 10454-4 Average value 50 (sample dimensions 200x300mm)
Mohs scale hardness UNI EN 101 Average Value 5
Coefficient of linear thermal expansion / 10-6 / 0C ISO 10545-8 6.6
Resistance to thermal shock ISO 10545-9 Resistant
Chemical resistance ISO 10545-13 No visible effect
Stain resistance ISO 10545-14 Class 4 - 5
Frost resistance ISO 10545-12 Resistant
Shock resistance ISO 10545-5 On Demand
Coefficient of friction ASTM C-1028 -
DIN 51130 -
ANSI A137.1 (DCOF) -
Fire reaction EN 13501 (rev. 2005) A2 – s1,d0
Eco Friendly Tiles LtdGround Floor, Solon House40a Peterborough RoadLondonSW6 3BN
0844 980 2233 [email protected]
This technical information sheet is not a guarantee of performance and is not a warranty, either explicit or implicit. Rather, it tries to summarize for the designer, installer or developer the technical data provided to Eco Friendly Tiles by the independent tile manufac-turer. This information may not be applicable in all geographical areas. It is the responsibility of those individuals who are referring to this document to independently research and determine which tiles are suitable for a given project according to applicable British or International Standards and any governing legislative requirements. This document cannot be used as expert opinion, evidence or in any legal or administrative procedure unless authorized by Eco Friendly Tiles Ltd.
Certifications
40%
Pre-Consumer Recycled Content
LEEDContributes to Contributes to
Eco Friendly Tiles LtdGround Floor, Solon House40a Peterborough RoadLondonSW6 3BN
0844 980 2233 [email protected]
www.ecofriendlytiles.co.uk
FOR OFFICE USE ONLYLarge FormatBREEAM/LEEDMetallic
5.6mm Floor / Wall / Overlay / Facade
1m
1m
1.5m
1m3m
1m
CarbonOffset
ChemicalResistant
FrostResistant
Morecolours
available
Thermal Shock
Resistant
PTV 40+Upon
Request
40% BREEAM LEED SKA
Properties
Other finishes available
Sizes available Thickness available
Natural
Ultra-thin - from just 3.5mm - yet so strong it can be laid in 3m x 1m slabs on facades, floors and walls or as an overlay. With low embodied carbon, up to 40% pre-
consumer recycled content, flexible sizes and over one hundred colours and finishes, it’s time to join the surface revolution. And with LEED accreditation, Ska approval
and pending LCA and EPD certification, it’s a range perfectly in step with 21st century living.
To see the full range or download the Brochure, visit: www.ecofriendlytiles.co.uk/eco/surface-brochure
11.3.C(3)
Eco Friendly Tiles / Shannon Range / Tray 11
Eco Friendly Tiles / Shannon Range / Tray 11
Technical SpecificationCode: 11.3.C(3)
Physical & chemical properties Norm/test method Shannon 3.5mm (wall only)
Straightness of sides ISO 10545-2 Max. deviation on the side +/- 0.5mm
Flatness ISO 10545-2 Max. deviation on the diagonal +/- 1.0mm
Weight Factory Average value 8.2kg/m2
Surface quality/% of tiles with no visible flaws IS0 10545-2 >95%
Water absorption ISO 10545-3 Average value 0.1% (0.3%)
ASTM C373 Average value 0.1% (0.3%)
Breaking load in N / samples 200x300mm ISO 10545-4 Average value 700
Bending strength in N/mm2 ISO 10454-4 Average value 50 (sample dimensions 200x300mm)
Mohs scale hardness UNI EN 101 Average Value 5
Coefficient of linear thermal expansion / 10-6 / 0C ISO 10545-8 6.6
Resistance to thermal shock ISO 10545-9 Resistant
Chemical resistance ISO 10545-13 No visible effect
Stain resistance ISO 10545-14 Class 4 - 5
Frost resistance ISO 10545-12 Resistant
Shock resistance ISO 10545-5 On Demand
Coefficient of friction ASTM C-1028 -
DIN 51130 -
ANSI A137.1 (DCOF) -
Fire reaction EN 13501 (rev. 2005) A2 – s1,d0
Eco Friendly Tiles LtdGround Floor, Solon House40a Peterborough RoadLondonSW6 3BN
0844 980 2233 [email protected]
This technical information sheet is not a guarantee of performance and is not a warranty, either explicit or implicit. Rather, it tries to summarize for the designer, installer or developer the technical data provided to Eco Friendly Tiles by the independent tile manufac-turer. This information may not be applicable in all geographical areas. It is the responsibility of those individuals who are referring to this document to independently research and determine which tiles are suitable for a given project according to applicable British or International Standards and any governing legislative requirements. This document cannot be used as expert opinion, evidence or in any legal or administrative procedure unless authorized by Eco Friendly Tiles Ltd.
Certifications
40%
Pre-Consumer Recycled Content
LEEDContributes to Contributes to
Eco Friendly Tiles LtdGround Floor, Solon House40a Peterborough RoadLondonSW6 3BN
0844 980 2233 [email protected]
www.ecofriendlytiles.co.uk
FOR OFFICE USE ONLYLarge FormatBREEAM/LEEDMarble & Stone
Polished/Semi-Polished
5.6mm Floor / Wall / Overlay / Facade
1m
1m
1.5m
1m3m
1m
CarbonOffset
ChemicalResistant
FrostResistant
Morecolours
available
Thermal Shock
Resistant
PTV 40+Upon
Request
20% BREEAM LEED SKA
Properties
Other finishes available
Sizes available Thickness available
Polished
Ultra-thin - from just 3.5mm - yet so strong it can be laid in 3m x 1m slabs on facades, floors and walls or as an overlay. With low embodied carbon, up to 40% pre-
consumer recycled content, flexible sizes and over one hundred colours and finishes, it’s time to join the surface revolution. And with LEED accreditation, Ska approval
and pending LCA and EPD certification, it’s a range perfectly in step with 21st century living.
To see the full range or download the Brochure, visit: www.ecofriendlytiles.co.uk/eco/surface-brochure
11.3.D P
Eco Friendly Tiles / Shannon Range / Tray 11
Eco Friendly Tiles / Shannon Range / Tray 11
Technical SpecificationCode: 11.3.D Polished
Physical & chemical properties Norm/test method Shannon 5.6mm
Straightness of sides ISO 10545-2 Max. deviation on the side +/- 0.5mm
Flatness ISO 10545-2 Max. deviation on the diagonal +/- 1.0mm
Weight Factory Average value 14kg/m2
Surface quality/% of tiles with no visible flaws IS0 10545-2 >95%
Water absorption ISO 10545-3 Average value 0.1% (<0.3%)
ASTM C373 Average value 0.1% (<0.3%)
Breaking load in N / samples 200x300mm ISO 10545-4 Average value 1100
Bending strength in N/mm2 ISO 10454-4 Average value 50 (sample dimensions 200x300mm)
Mohs scale hardness UNI EN 101 Average Value 5
Resistance to deep abrasion ISO 10545-6 ≤175mm3
Coefficient of linear thermal expansion / 10-6 / 0C ISO 10545-8 6.6
Resistance to thermal shock ISO 10545-9 Resistant
Chemical resistance ISO 10545-13 Partial change to surface appearance
Stain resistance ISO 10545-14 Class 2
Frost resistance ISO 10545-12 Resistant
Shock resistance ISO 10545-5 On demand
Fire reaction EN 13501 (rev. 2005) A1 (decision 96/603/ce as amended)
Eco Friendly Tiles LtdGround Floor, Solon House40a Peterborough RoadLondonSW6 3BN
0844 980 2233 [email protected]
This technical information sheet is not a guarantee of performance and is not a warranty, either explicit or implicit. Rather, it tries to summarize for the designer, installer or developer the technical data provided to Eco Friendly Tiles by the independent tile manufac-turer. This information may not be applicable in all geographical areas. It is the responsibility of those individuals who are referring to this document to independently research and determine which tiles are suitable for a given project according to applicable British or International Standards and any governing legislative requirements. This document cannot be used as expert opinion, evidence or in any legal or administrative procedure unless authorized by Eco Friendly Tiles Ltd.
Certifications
20%
Pre-Consumer Recycled Content
LEEDContributes to Contributes to
Eco Friendly Tiles LtdGround Floor, Solon House40a Peterborough RoadLondonSW6 3BN
0844 980 2233 [email protected]
www.ecofriendlytiles.co.uk
FOR OFFICE USE ONLYLarge FormatBREEAM/LEEDMarble & Stone
Polished/Semi-Polished
5.6mm Floor / Wall / Overlay / Facade
1m
1m
1.5m
1m3m
1m
CarbonOffset
ChemicalResistant
FrostResistant
Morecolours
available
Thermal Shock
Resistant
PTV 40+Upon
Request
30% BREEAM LEED SKA
Properties
Other finishes available
Sizes available Thickness available
Polished
Ultra-thin - from just 3.5mm - yet so strong it can be laid in 3m x 1m slabs on facades, floors and walls or as an overlay. With low embodied carbon, up to 40% pre-
consumer recycled content, flexible sizes and over one hundred colours and finishes, it’s time to join the surface revolution. And with LEED accreditation, Ska approval
and pending LCA and EPD certification, it’s a range perfectly in step with 21st century living.
To see the full range or download the Brochure, visit: www.ecofriendlytiles.co.uk/eco/surface-brochure
11.3.E(2) P
Eco Friendly Tiles / Shannon Range / Tray 11
Eco Friendly Tiles / Shannon Range / Tray 11
Technical SpecificationCode: 11.3.E(2)
Physical & chemical properties Norm/test method Shannon 5.6mm
Straightness of sides ISO 10545-2 Max. deviation on the side +/- 0.5mm
Flatness ISO 10545-2 Max. deviation on the diagonal +/- 1.0mm
Weight Factory Average value 14kg/m2
Surface quality/% of tiles with no visible flaws IS0 10545-2 >95%
Water absorption ISO 10545-3 Average value 0.1% (<0.3%)
ASTM C373 Average value 0.1% (<0.3%)
Breaking load in N / samples 200x300mm ISO 10545-4 Average value 1100
Bending strength in N/mm2 ISO 10454-4 Average value 50 (sample dimensions 200x300mm)
Mohs scale hardness UNI EN 101 Average Value 6
Resistance to deep abrasion ISO 10545-6 ≤175mm3
Coefficient of linear thermal expansion / 10-6 / 0C ISO 10545-8 6.6
Resistance to thermal shock ISO 10545-9 Resistant
Chemical resistance ISO 10545-13 No visible effect
Stain resistance ISO 10545-14 Class 5
Frost resistance ISO 10545-12 Resistant
Shock resistance ISO 10545-5 On demand
Coefficient of friction ASTM C-1028 µ > 0.6 (in dry conditions)
DIN 51130 R9
ANSI A137.1 (DCOF) ≥ 0.42
Fire reaction EN 13501 (rev. 2005) A1 (decision 96/603/ce as amended)
Eco Friendly Tiles LtdGround Floor, Solon House40a Peterborough RoadLondonSW6 3BN
0844 980 2233 [email protected]
This technical information sheet is not a guarantee of performance and is not a warranty, either explicit or implicit. Rather, it tries to summarize for the designer, installer or developer the technical data provided to Eco Friendly Tiles by the independent tile manufac-turer. This information may not be applicable in all geographical areas. It is the responsibility of those individuals who are referring to this document to independently research and determine which tiles are suitable for a given project according to applicable British or International Standards and any governing legislative requirements. This document cannot be used as expert opinion, evidence or in any legal or administrative procedure unless authorized by Eco Friendly Tiles Ltd.
Certifications
30%
Pre-Consumer Recycled Content
LEEDContributes to Contributes to
Eco Friendly Tiles LtdGround Floor, Solon House40a Peterborough RoadLondonSW6 3BN
0844 980 2233 [email protected]
www.ecofriendlytiles.co.uk
FOR OFFICE USE ONLYLarge FormatBREEAM/LEEDMarble & Stone
5.6mm Floor / Wall / Overlay / Facade
1m
1m
1.5m
1m3m
1m
Polished
CarbonOffset
ChemicalResistant
FrostResistant
Morecolours
available
Thermal Shock
Resistant
PTV 40+Upon
Request
30% BREEAM LEED SKA R9
Properties
Other finishes available
Sizes available Thickness available
Natural
Ultra-thin - from just 3.5mm - yet so strong it can be laid in 3m x 1m slabs on facades, floors and walls or as an overlay. With low embodied carbon, up to 40% pre-
consumer recycled content, flexible sizes and over one hundred colours and finishes, it’s time to join the surface revolution. And with LEED accreditation, Ska approval
and pending LCA and EPD certification, it’s a range perfectly in step with 21st century living.
To see the full range or download the Brochure, visit: www.ecofriendlytiles.co.uk/eco/surface-brochure
11.3.E(2)
Eco Friendly Tiles / Shannon Range / Tray 11
Eco Friendly Tiles LtdGround Floor, Solon House40a Peterborough RoadLondonSW6 3BN
0844 980 2233 [email protected]
www.ecofriendlytiles.co.uk
FOR OFFICE USE ONLYLarge FormatBREEAM/LEEDMarble & Stone
Polished/Semi-Polished
5.6mm Floor / Wall / Overlay / Facade
1m
1m
1.5m
1m3m
1m
Natural
CarbonOffset
ChemicalResistant
FrostResistant
Morecolours
available
Thermal Shock
Resistant
PTV 40+Upon
Request
30% BREEAM LEED SKA
Properties
Other finishes available
Sizes available Thickness available
Polished
Ultra-thin - from just 3.5mm - yet so strong it can be laid in 3m x 1m slabs on facades, floors and walls or as an overlay. With low embodied carbon, up to 40% pre-
consumer recycled content, flexible sizes and over one hundred colours and finishes, it’s time to join the surface revolution. And with LEED accreditation, Ska approval
and pending LCA and EPD certification, it’s a range perfectly in step with 21st century living.
To see the full range or download the Brochure, visit: www.ecofriendlytiles.co.uk/eco/surface-brochure
11.4.A P
Eco Friendly Tiles / Shannon Range / Tray 11
Eco Friendly Tiles / Shannon Range / Tray 11
Technical SpecificationCode: 11.4.A Polished
Physical & chemical properties Norm/test method Shannon 5.6mm
Straightness of sides ISO 10545-2 Max. deviation on the side +/- 0.5mm
Flatness ISO 10545-2 Max. deviation on the diagonal +/- 1.0mm
Weight Factory Average value 14kg/m2
Surface quality/% of tiles with no visible flaws IS0 10545-2 >95%
Water absorption ISO 10545-3 Average value 0.1% (<0.3%)
ASTM C373 Average value 0.1% (<0.3%)
Breaking load in N / samples 200x300mm ISO 10545-4 Average value 1100
Bending strength in N/mm2 ISO 10454-4 Average value 50 (sample dimensions 200x300mm)
Mohs scale hardness UNI EN 101 Average Value 5
Resistance to deep abrasion ISO 10545-6 ≤175mm3
Coefficient of linear thermal expansion / 10-6 / 0C ISO 10545-8 6.6
Resistance to thermal shock ISO 10545-9 Resistant
Chemical resistance ISO 10545-13 Partial change to surface appearance
Stain resistance ISO 10545-14 Class 2
Frost resistance ISO 10545-12 Resistant
Shock resistance ISO 10545-5 On demand
Coefficient of friction ASTM C-1028 -
DIN 51130 -
Fire reaction EN 13501 (rev. 2005) A1 (decision 96/603/ce as amended)
Eco Friendly Tiles LtdGround Floor, Solon House40a Peterborough RoadLondonSW6 3BN
0844 980 2233 [email protected]
This technical information sheet is not a guarantee of performance and is not a warranty, either explicit or implicit. Rather, it tries to summarize for the designer, installer or developer the technical data provided to Eco Friendly Tiles by the independent tile manufac-turer. This information may not be applicable in all geographical areas. It is the responsibility of those individuals who are referring to this document to independently research and determine which tiles are suitable for a given project according to applicable British or International Standards and any governing legislative requirements. This document cannot be used as expert opinion, evidence or in any legal or administrative procedure unless authorized by Eco Friendly Tiles Ltd.
Certifications
30%
Pre-Consumer Recycled Content
LEEDContributes to Contributes to
Eco Friendly Tiles LtdGround Floor, Solon House40a Peterborough RoadLondonSW6 3BN
0844 980 2233 [email protected]
www.ecofriendlytiles.co.uk
FOR OFFICE USE ONLYLarge FormatBREEAM/LEEDMarble & Stone
5.6mm Floor / Wall / Overlay / Facade
1m
1m
1.5m
1m3m
1m
Polished
CarbonOffset
ChemicalResistant
FrostResistant
Morecolours
available
Thermal Shock
Resistant
PTV 40+Upon
Request
30% BREEAM LEED SKA R9
Properties
Other finishes available
Sizes available Thickness available
Natural
Ultra-thin - from just 3.5mm - yet so strong it can be laid in 3m x 1m slabs on facades, floors and walls or as an overlay. With low embodied carbon, up to 40% pre-
consumer recycled content, flexible sizes and over one hundred colours and finishes, it’s time to join the surface revolution. And with LEED accreditation, Ska approval
and pending LCA and EPD certification, it’s a range perfectly in step with 21st century living.
To see the full range or download the Brochure, visit: www.ecofriendlytiles.co.uk/eco/surface-brochure
11.4.A
Eco Friendly Tiles / Shannon Range / Tray 11
Eco Friendly Tiles / Shannon Range / Tray 11
Technical SpecificationCode: 11.4.A
Physical & chemical properties Norm/test method Shannon 5.6mm
Straightness of sides ISO 10545-2 Max. deviation on the side +/- 0.5mm
Flatness ISO 10545-2 Max. deviation on the diagonal +/- 1.0mm
Weight Factory Average value 14kg/m2
Surface quality/% of tiles with no visible flaws IS0 10545-2 >95%
Water absorption ISO 10545-3 Average value 0.1% (<0.3%)
ASTM C373 Average value 0.1% (<0.3%)
Breaking load in N / samples 200x300mm ISO 10545-4 Average value 1100
Bending strength in N/mm2 ISO 10454-4 Average value 50 (sample dimensions 200x300mm)
Mohs scale hardness UNI EN 101 Average Value 6
Resistance to deep abrasion ISO 10545-6 ≤175mm3
Coefficient of linear thermal expansion / 10-6 / 0C ISO 10545-8 6.6
Resistance to thermal shock ISO 10545-9 Resistant
Chemical resistance ISO 10545-13 No visible effect
Stain resistance ISO 10545-14 Class 5
Frost resistance ISO 10545-12 Resistant
Shock resistance ISO 10545-5 On demand
Coefficient of friction ASTM C-1028 µ > 0.6 (in dry conditions)
DIN 51130 R9
ANSI A137.1 (DCOF) ≥ 0.42
Fire reaction EN 13501 (rev. 2005) A1 (decision 96/603/ce as amended)
Eco Friendly Tiles LtdGround Floor, Solon House40a Peterborough RoadLondonSW6 3BN
0844 980 2233 [email protected]
This technical information sheet is not a guarantee of performance and is not a warranty, either explicit or implicit. Rather, it tries to summarize for the designer, installer or developer the technical data provided to Eco Friendly Tiles by the independent tile manufac-turer. This information may not be applicable in all geographical areas. It is the responsibility of those individuals who are referring to this document to independently research and determine which tiles are suitable for a given project according to applicable British or International Standards and any governing legislative requirements. This document cannot be used as expert opinion, evidence or in any legal or administrative procedure unless authorized by Eco Friendly Tiles Ltd.
Certifications
30%
Pre-Consumer Recycled Content
LEEDContributes to Contributes to
Eco Friendly Tiles LtdGround Floor, Solon House40a Peterborough RoadLondonSW6 3BN
0844 980 2233 [email protected]
www.ecofriendlytiles.co.uk
FOR OFFICE USE ONLYLarge FormatBREEAM/LEEDMarble & Stone
High Slip
5.6mm Floor / Wall / Overlay / Facade
1m
1m
1.5m
1m3m
1m
Polished
CarbonOffset
ChemicalResistant
FrostResistant
Morecolours
available
Thermal Shock
Resistant
PTV 40+Upon
Request
30% BREEAM LEED SKA R10
Properties
Other finishes available
Sizes available Thickness available
Brushed
Ultra-thin - from just 3.5mm - yet so strong it can be laid in 3m x 1m slabs on facades, floors and walls or as an overlay. With low embodied carbon, up to 40% pre-
consumer recycled content, flexible sizes and over one hundred colours and finishes, it’s time to join the surface revolution. And with LEED accreditation, Ska approval
and pending LCA and EPD certification, it’s a range perfectly in step with 21st century living.
To see the full range or download the Brochure, visit: www.ecofriendlytiles.co.uk/eco/surface-brochure
11.4.B B
Eco Friendly Tiles / Shannon Range / Tray 11
Eco Friendly Tiles / Shannon Range / Tray 11
Technical SpecificationCode: 11.4.B Brushed
Physical & chemical properties Norm/test method Shannon 5.6mm
Straightness of sides ISO 10545-2 Max. deviation on the side +/- 0.5mm
Flatness ISO 10545-2 Max. deviation on the diagonal +/- 1.0mm
Weight Factory Average value 14kg/m2
Surface quality/% of tiles with no visible flaws IS0 10545-2 >95%
Water absorption ISO 10545-3 Average value 0.1% (<0.3%)
ASTM C373 Average value 0.1% (<0.3%)
Breaking load in N / samples 200x300mm ISO 10545-4 Average value 1100
Bending strength in N/mm2 ISO 10454-4 Average value 50 (sample dimensions 200x300mm)
Mohs scale hardness UNI EN 101 Average Value 6
Resistance to deep abrasion ISO 10545-6 ≤175mm3
Coefficient of linear thermal expansion / 10-6 / 0C ISO 10545-8 6.6
Resistance to thermal shock ISO 10545-9 Resistant
Chemical resistance ISO 10545-13 No visible effect
Stain resistance ISO 10545-14 Class 5
Frost resistance ISO 10545-12 Resistant
Shock resistance ISO 10545-5 On demand
Coefficient of friction ASTM C-1028 µ > 0.6 (in dry conditions)
DIN 51130 R10
ANSI A137.1 (DCOF) ≥ 0.42
Fire reaction EN 13501 (rev. 2005) A1 (decision 96/603/ce as amended)
Eco Friendly Tiles LtdGround Floor, Solon House40a Peterborough RoadLondonSW6 3BN
0844 980 2233 [email protected]
This technical information sheet is not a guarantee of performance and is not a warranty, either explicit or implicit. Rather, it tries to summarize for the designer, installer or developer the technical data provided to Eco Friendly Tiles by the independent tile manufac-turer. This information may not be applicable in all geographical areas. It is the responsibility of those individuals who are referring to this document to independently research and determine which tiles are suitable for a given project according to applicable British or International Standards and any governing legislative requirements. This document cannot be used as expert opinion, evidence or in any legal or administrative procedure unless authorized by Eco Friendly Tiles Ltd.
Certifications
30%
Pre-Consumer Recycled Content
LEEDContributes to Contributes to
Eco Friendly Tiles LtdGround Floor, Solon House40a Peterborough RoadLondonSW6 3BN
0844 980 2233 [email protected]
www.ecofriendlytiles.co.uk
FOR OFFICE USE ONLYLarge FormatBREEAM/LEEDMarble & Stone
Polished/Semi-Polished
5.6mm Floor / Wall / Overlay / Facade
1m
1m
1.5m
1m3m
1m
Brushed
CarbonOffset
ChemicalResistant
FrostResistant
Morecolours
available
Thermal Shock
Resistant
PTV 40+Upon
Request
30% BREEAM LEED SKA
Properties
Other finishes available
Sizes available Thickness available
Polished
Ultra-thin - from just 3.5mm - yet so strong it can be laid in 3m x 1m slabs on facades, floors and walls or as an overlay. With low embodied carbon, up to 40% pre-
consumer recycled content, flexible sizes and over one hundred colours and finishes, it’s time to join the surface revolution. And with LEED accreditation, Ska approval
and pending LCA and EPD certification, it’s a range perfectly in step with 21st century living.
To see the full range or download the Brochure, visit: www.ecofriendlytiles.co.uk/eco/surface-brochure
11.4.B P
Eco Friendly Tiles / Shannon Range / Tray 11
Eco Friendly Tiles / Shannon Range / Tray 11
Technical SpecificationCode: 11.4.B Polished
Physical & chemical properties Norm/test method Shannon 5.6mm
Straightness of sides ISO 10545-2 Max. deviation on the side +/- 0.5mm
Flatness ISO 10545-2 Max. deviation on the diagonal +/- 1.0mm
Weight Factory Average value 14kg/m2
Surface quality/% of tiles with no visible flaws IS0 10545-2 >95%
Water absorption ISO 10545-3 Average value 0.1% (<0.3%)
ASTM C373 Average value 0.1% (<0.3%)
Breaking load in N / samples 200x300mm ISO 10545-4 Average value 1100
Bending strength in N/mm2 ISO 10454-4 Average value 50 (sample dimensions 200x300mm)
Mohs scale hardness UNI EN 101 Average Value 5
Resistance to deep abrasion ISO 10545-6 ≤175mm3
Coefficient of linear thermal expansion / 10-6 / 0C ISO 10545-8 6.6
Resistance to thermal shock ISO 10545-9 Resistant
Chemical resistance ISO 10545-13 Partial change to surface appearance
Stain resistance ISO 10545-14 Class 2
Frost resistance ISO 10545-12 Resistant
Shock resistance ISO 10545-5 On demand
Coefficient of friction ASTM C-1028 -
DIN 51130 -
Fire reaction EN 13501 (rev. 2005) A1 (decision 96/603/ce as amended)
Eco Friendly Tiles LtdGround Floor, Solon House40a Peterborough RoadLondonSW6 3BN
0844 980 2233 [email protected]
This technical information sheet is not a guarantee of performance and is not a warranty, either explicit or implicit. Rather, it tries to summarize for the designer, installer or developer the technical data provided to Eco Friendly Tiles by the independent tile manufac-turer. This information may not be applicable in all geographical areas. It is the responsibility of those individuals who are referring to this document to independently research and determine which tiles are suitable for a given project according to applicable British or International Standards and any governing legislative requirements. This document cannot be used as expert opinion, evidence or in any legal or administrative procedure unless authorized by Eco Friendly Tiles Ltd.
Certifications
30%
Pre-Consumer Recycled Content
LEEDContributes to Contributes to
Eco Friendly Tiles LtdGround Floor, Solon House40a Peterborough RoadLondonSW6 3BN
0844 980 2233 [email protected]
www.ecofriendlytiles.co.uk
FOR OFFICE USE ONLYLarge FormatBREEAM/LEEDMarble & Stone
Polished/Semi-Polished
5.6mm Floor / Wall / Overlay / Facade
1m
1m
1.5m
1m3m
1m
Natural
CarbonOffset
ChemicalResistant
FrostResistant
Morecolours
available
Thermal Shock
Resistant
PTV 40+Upon
Request
30% BREEAM LEED SKA
Properties
Other finishes available
Sizes available Thickness available
Polished
Ultra-thin - from just 3.5mm - yet so strong it can be laid in 3m x 1m slabs on facades, floors and walls or as an overlay. With low embodied carbon, up to 40% pre-
consumer recycled content, flexible sizes and over one hundred colours and finishes, it’s time to join the surface revolution. And with LEED accreditation, Ska approval
and pending LCA and EPD certification, it’s a range perfectly in step with 21st century living.
To see the full range or download the Brochure, visit: www.ecofriendlytiles.co.uk/eco/surface-brochure
11.4.C P
Eco Friendly Tiles / Shannon Range / Tray 11
Eco Friendly Tiles / Shannon Range / Tray 11
Technical SpecificationCode: 11.4.C Polished
Physical & chemical properties Norm/test method Shannon 5.6mm
Straightness of sides ISO 10545-2 Max. deviation on the side +/- 0.5mm
Flatness ISO 10545-2 Max. deviation on the diagonal +/- 1.0mm
Weight Factory Average value 14kg/m2
Surface quality/% of tiles with no visible flaws IS0 10545-2 >95%
Water absorption ISO 10545-3 Average value 0.1% (<0.3%)
ASTM C373 Average value 0.1% (<0.3%)
Breaking load in N / samples 200x300mm ISO 10545-4 Average value 1100
Bending strength in N/mm2 ISO 10454-4 Average value 50 (sample dimensions 200x300mm)
Mohs scale hardness UNI EN 101 Average Value 5
Resistance to deep abrasion ISO 10545-6 ≤175mm3
Coefficient of linear thermal expansion / 10-6 / 0C ISO 10545-8 6.6
Resistance to thermal shock ISO 10545-9 Resistant
Chemical resistance ISO 10545-13 Partial change to surface appearance
Stain resistance ISO 10545-14 Class 2
Frost resistance ISO 10545-12 Resistant
Shock resistance ISO 10545-5 On demand
Coefficient of friction ASTM C-1028 -
DIN 51130 -
Fire reaction EN 13501 (rev. 2005) A1 (decision 96/603/ce as amended)
Eco Friendly Tiles LtdGround Floor, Solon House40a Peterborough RoadLondonSW6 3BN
0844 980 2233 [email protected]
This technical information sheet is not a guarantee of performance and is not a warranty, either explicit or implicit. Rather, it tries to summarize for the designer, installer or developer the technical data provided to Eco Friendly Tiles by the independent tile manufac-turer. This information may not be applicable in all geographical areas. It is the responsibility of those individuals who are referring to this document to independently research and determine which tiles are suitable for a given project according to applicable British or International Standards and any governing legislative requirements. This document cannot be used as expert opinion, evidence or in any legal or administrative procedure unless authorized by Eco Friendly Tiles Ltd.
Certifications
30%
Pre-Consumer Recycled Content
LEEDContributes to Contributes to
Eco Friendly Tiles LtdGround Floor, Solon House40a Peterborough RoadLondonSW6 3BN
0844 980 2233 [email protected]
www.ecofriendlytiles.co.uk
FOR OFFICE USE ONLYLarge FormatBREEAM/LEEDMarble & Stone
5.6mm Floor / Wall / Overlay / Facade
1m
1m
1.5m
1m3m
1m
Polished
CarbonOffset
ChemicalResistant
FrostResistant
Morecolours
available
Thermal Shock
Resistant
PTV 40+Upon
Request
30% BREEAM LEED SKA R10
Properties
Other finishes available
Sizes available Thickness available
Natural
Ultra-thin - from just 3.5mm - yet so strong it can be laid in 3m x 1m slabs on facades, floors and walls or as an overlay. With low embodied carbon, up to 40% pre-
consumer recycled content, flexible sizes and over one hundred colours and finishes, it’s time to join the surface revolution. And with LEED accreditation, Ska approval
and pending LCA and EPD certification, it’s a range perfectly in step with 21st century living.
To see the full range or download the Brochure, visit: www.ecofriendlytiles.co.uk/eco/surface-brochure
11.4.C
Eco Friendly Tiles / Shannon Range / Tray 11
Eco Friendly Tiles / Shannon Range / Tray 11
Technical SpecificationCode: 11.4.C
Physical & chemical properties Norm/test method Shannon 5.6mm
Straightness of sides ISO 10545-2 Max. deviation on the side +/- 0.5mm
Flatness ISO 10545-2 Max. deviation on the diagonal +/- 1.0mm
Weight Factory Average value 14kg/m2
Surface quality/% of tiles with no visible flaws IS0 10545-2 >95%
Water absorption ISO 10545-3 Average value 0.1% (<0.3%)
ASTM C373 Average value 0.1% (<0.3%)
Breaking load in N / samples 200x300mm ISO 10545-4 Average value 1100
Bending strength in N/mm2 ISO 10454-4 Average value 50 (sample dimensions 200x300mm)
Mohs scale hardness UNI EN 101 Average Value 6
Resistance to deep abrasion ISO 10545-6 ≤175mm3
Coefficient of linear thermal expansion / 10-6 / 0C ISO 10545-8 6.6
Resistance to thermal shock ISO 10545-9 Resistant
Chemical resistance ISO 10545-13 No visible effect
Stain resistance ISO 10545-14 Class 5
Frost resistance ISO 10545-12 Resistant
Shock resistance ISO 10545-5 On demand
Coefficient of friction ASTM C-1028 µ > 0.6 (in dry conditions)
DIN 51130 R10
ANSI A137.1 (DCOF) ≥ 0.42
Fire reaction EN 13501 (rev. 2005) A1 (decision 96/603/ce as amended)
Eco Friendly Tiles LtdGround Floor, Solon House40a Peterborough RoadLondonSW6 3BN
0844 980 2233 [email protected]
This technical information sheet is not a guarantee of performance and is not a warranty, either explicit or implicit. Rather, it tries to summarize for the designer, installer or developer the technical data provided to Eco Friendly Tiles by the independent tile manufac-turer. This information may not be applicable in all geographical areas. It is the responsibility of those individuals who are referring to this document to independently research and determine which tiles are suitable for a given project according to applicable British or International Standards and any governing legislative requirements. This document cannot be used as expert opinion, evidence or in any legal or administrative procedure unless authorized by Eco Friendly Tiles Ltd.
Certifications
30%
Pre-Consumer Recycled Content
LEEDContributes to Contributes to
Eco Friendly Tiles LtdGround Floor, Solon House40a Peterborough RoadLondonSW6 3BN
0844 980 2233 [email protected]
www.ecofriendlytiles.co.uk
FOR OFFICE USE ONLYLarge FormatBREEAM/LEEDHigh Slip
Concrete
5.6mm Floor / Wall / Overlay / Facade
3.5mm Wall
1m
1m
1.5m
1m3m
1m
CarbonOffset
ChemicalResistant
FrostResistant
Morecolours
available
Thermal Shock
Resistant
PTV 40+Upon
Request
40% BREEAM LEED SKA R10
Properties
Other finishes available
Sizes available Thickness available
Natural
Ultra-thin - from just 3.5mm - yet so strong it can be laid in 3m x 1m slabs on facades, floors and walls or as an overlay. With low embodied carbon, up to 40% pre-
consumer recycled content, flexible sizes and over one hundred colours and finishes, it’s time to join the surface revolution. And with LEED accreditation, Ska approval
and pending LCA and EPD certification, it’s a range perfectly in step with 21st century living.
To see the full range or download the Brochure, visit: www.ecofriendlytiles.co.uk/eco/surface-brochure
11.4.D(2)
Eco Friendly Tiles / Shannon Range / Tray 11
Eco Friendly Tiles / Shannon Range / Tray 11
Technical SpecificationCode: 11.4.D(2)
Physical & chemical properties Norm/test method Shannon 3.5mm (wall only) Shannon 5.6mm
Straightness of sides ISO 10545-2 Max. deviation on the side +/- 0.5mm Max. deviation on the side +/- 0.5mm
Dimensions ISO 10545-2 Max. deviation on the diagonal +/- 1.0mm Max. deviation on the diagonal +/- 1.0mm
Weight Factory Average value 8.2kg/m2 Average value 14kg/m2
Surface quality/% of tiles with no visible flaws IS0 10545-2 >95% >95%
Water absorption ISO 10545-3 Average value 0.1% (0.3%) Average value 0.1% (<0.3%)
ASTM C373 Average value 0.1% (0.3%) Average value 0.1% (<0.3%)
Breaking load in N / samples 200x300mm ISO 10545-4 Average value 700 Average value 1100
Bending strength in N/mm2 ISO 10454-4 Average value 50 Average value 50 (sample dimensions 200x300mm) (sample dimensions 200x300mm)
Mohs scale hardness UNI EN 101 Average Value 6 Average Value 6
Resistance to deep abrasion ISO 10545-6 ≤175mm3 ≤175mm3
Coefficient of linear thermal expansion / 10-6 / 0C ISO 10545-8 6.6 6.6
Resistance to thermal shock ISO 10545-9 Resistant Resistant
Chemical resistance ISO 10545-13 No visible effect No visible effect
Stain resistance ISO 10545-14 Class 5 Class 5
Frost resistance ISO 10545-12 Resistant Resistant
Shock resistance ISO 10545-5 On Demand On demand
Coefficient of friction ASTM C-1028 - µ.0.6 (in dry conditions)
DIN 51130 - R10
ANSI A137.1 (DCOF) - ≥0.42
Fire reaction EN 13501 (rev. 2005) A2 – s1,d0 A1 (decision 96/603/ce as amended)
Eco Friendly Tiles LtdGround Floor, Solon House40a Peterborough RoadLondonSW6 3BN
0844 980 2233 [email protected]
This technical information sheet is not a guarantee of performance and is not a warranty, either explicit or implicit. Rather, it tries to summarize for the designer, installer or developer the technical data provided to Eco Friendly Tiles by the independent tile manufac-turer. This information may not be applicable in all geographical areas. It is the responsibility of those individuals who are referring to this document to independently research and determine which tiles are suitable for a given project according to applicable British or International Standards and any governing legislative requirements. This document cannot be used as expert opinion, evidence or in any legal or administrative procedure unless authorized by Eco Friendly Tiles Ltd.
Certifications
40%
Pre-Consumer Recycled Content
LEEDContributes to Contributes to
Eco Friendly Tiles LtdGround Floor, Solon House40a Peterborough RoadLondonSW6 3BN
0844 980 2233 [email protected]
www.ecofriendlytiles.co.uk
FOR OFFICE USE ONLYLarge FormatBREEAM/LEEDHigh Slip
Concrete
5.6mm Floor / Wall / Overlay / Facade
3.5mm Wall
1m
1m
1.5m
1m3m
1m
CarbonOffset
ChemicalResistant
FrostResistant
Morecolours
available
Thermal Shock
Resistant
PTV 40+Upon
Request
40% BREEAM LEED SKA R10
Properties
Other finishes available
Sizes available Thickness available
Natural
Ultra-thin - from just 3.5mm - yet so strong it can be laid in 3m x 1m slabs on facades, floors and walls or as an overlay. With low embodied carbon, up to 40% pre-
consumer recycled content, flexible sizes and over one hundred colours and finishes, it’s time to join the surface revolution. And with LEED accreditation, Ska approval
and pending LCA and EPD certification, it’s a range perfectly in step with 21st century living.
To see the full range or download the Brochure, visit: www.ecofriendlytiles.co.uk/eco/surface-brochure
11.4.E
Eco Friendly Tiles / Shannon Range / Tray 11
Eco Friendly Tiles / Shannon Range / Tray 11
Technical SpecificationCode: 11.4.E
Physical & chemical properties Norm/test method Shannon 3.5mm (wall only) Shannon 5.6mm
Straightness of sides ISO 10545-2 Max. deviation on the side +/- 0.5mm Max. deviation on the side +/- 0.5mm
Flatness ISO 10545-2 Max. deviation on the diagonal +/- 1.0mm Max. deviation on the diagonal +/- 1.0mm
Weight Factory Average value 8.2kg/m2 Average value 14kg/m2
Surface quality/% of tiles with no visible flaws IS0 10545-2 >95% >95%
Water absorption ISO 10545-3 Average value 0.1% (0.3%) Average value 0.1% (<0.3%)
ASTM C373 Average value 0.1% (0.3%) Average value 0.1% (<0.3%)
Breaking load in N / samples 200x300mm ISO 10545-4 Average value 700 Average value 1100
Bending strength in N/mm2 ISO 10454-4 Average value 50 Average value 50 (sample dimensions 200x300mm) (sample dimensions 200x300mm)
Mohs scale hardness UNI EN 101 Average Value 6 Average Value 6
Resistance to deep abrasion ISO 10545-6 ≤175mm3 ≤175mm3
Coefficient of linear thermal expansion / 10-6 / 0C ISO 10545-8 6.6 6.6
Resistance to thermal shock ISO 10545-9 Resistant Resistant
Chemical resistance ISO 10545-13 No visible effect No visible effect
Stain resistance ISO 10545-14 Class 5 Class 5
Frost resistance ISO 10545-12 Resistant Resistant
Shock resistance ISO 10545-5 On Demand On demand
Coefficient of friction ASTM C-1028 - µ.0.6 (in dry conditions)
DIN 51130 - R10
ANSI A137.1 (DCOF) - ≥0.42
Fire reaction EN 13501 (rev. 2005) A2 – s1,d0 A1 (decision 96/603/ce as amended)
Eco Friendly Tiles LtdGround Floor, Solon House40a Peterborough RoadLondonSW6 3BN
0844 980 2233 [email protected]
This technical information sheet is not a guarantee of performance and is not a warranty, either explicit or implicit. Rather, it tries to summarize for the designer, installer or developer the technical data provided to Eco Friendly Tiles by the independent tile manufac-turer. This information may not be applicable in all geographical areas. It is the responsibility of those individuals who are referring to this document to independently research and determine which tiles are suitable for a given project according to applicable British or International Standards and any governing legislative requirements. This document cannot be used as expert opinion, evidence or in any legal or administrative procedure unless authorized by Eco Friendly Tiles Ltd.
Certifications
40%
Pre-Consumer Recycled Content
LEEDContributes to Contributes to
Eco Friendly Tiles / Shannon Range / Tray 11
Technical SpecificationCode: 11.4.E Polished
Physical & chemical properties Norm/test method Shannon 5.6mm
Straightness of sides ISO 10545-2 Max. deviation on the side +/- 0.5mm
Flatness ISO 10545-2 Max. deviation on the diagonal +/- 1.0mm
Weight Factory Average value 14kg/m2
Surface quality/% of tiles with no visible flaws IS0 10545-2 >95%
Water absorption ISO 10545-3 Average value 0.1% (<0.3%)
ASTM C373 Average value 0.1% (<0.3%)
Breaking load in N / samples 200x300mm ISO 10545-4 Average value 1100
Bending strength in N/mm2 ISO 10454-4 Average value 50 (sample dimensions 200x300mm)
Mohs scale hardness UNI EN 101 Average Value 5
Resistance to deep abrasion ISO 10545-6 ≤175mm3
Coefficient of linear thermal expansion / 10-6 / 0C ISO 10545-8 6.6
Resistance to thermal shock ISO 10545-9 Resistant
Chemical resistance ISO 10545-13 Partial change to surface appearance
Stain resistance ISO 10545-14 Class 2
Frost resistance ISO 10545-12 Resistant
Shock resistance ISO 10545-5 On demand
Coefficient of friction ASTM C-1028 -
DIN 51130 -
Fire reaction EN 13501 (rev. 2005) A1 (decision 96/603/ce as amended)
Eco Friendly Tiles LtdGround Floor, Solon House40a Peterborough RoadLondonSW6 3BN
0844 980 2233 [email protected]
This technical information sheet is not a guarantee of performance and is not a warranty, either explicit or implicit. Rather, it tries to summarize for the designer, installer or developer the technical data provided to Eco Friendly Tiles by the independent tile manufac-turer. This information may not be applicable in all geographical areas. It is the responsibility of those individuals who are referring to this document to independently research and determine which tiles are suitable for a given project according to applicable British or International Standards and any governing legislative requirements. This document cannot be used as expert opinion, evidence or in any legal or administrative procedure unless authorized by Eco Friendly Tiles Ltd.
Certifications
40%
Pre-Consumer Recycled Content
LEEDContributes to Contributes to
Eco Friendly Tiles LtdGround Floor, Solon House40a Peterborough RoadLondonSW6 3BN
0844 980 2233 [email protected]
Eco Friendly Tiles LtdGround Floor, Solon House40a Peterborough RoadLondonSW6 3BN
0844 980 2233 [email protected]
Thank you for requesting this information from Eco Friendly Tiles.While we’ve got your attention, we’d like to introduce you to our following services...
CPDBook an event to see how green
means go with eco rated tiles.
Mobile Sample LibraryOur sampling service
comes right to your door along with one-on-one product consultation
EcoBoxSee it, touch it... our sample trays link to online data sheets
SamplesCarbon off-set
sample deliveries.
