E7DWH-SS Instruction Manual

7/22/2019 E7DWH-SS Instruction Manual

1/13

E7DWSS

euro


2/13

This manual contains sections of SafetyInstructions,Operating Instructions,Installation Instructions a nd T roubleshootingTips etc. Carefully reading it before using thedishwasher will help you to use an d maintainthe dishwasher properly.

To review the section on Troubleshooting Tipswill help you to solve some common problemsby yourself and not need to ask for the help ofprofessional technicians.

Control Panel . . . . . . . . . . . . . . . . . . . . . . . . 2Dishwasher Featur es . . . . . . . . . . . . . . . . . 2Wash Cycle Table . . . . . . . . . . . . . . . . . . . . 3Detergent . . . . . . . . . . . . . . . . . . . . . . . . . . . 4Rinse Aid . . . . . . . . . . . . . . . . . . . . . . . . . 4,5Loading the Dishwasher Rack . . . . . . . . 5,6Turning On the App liance . . . . . . . . . . . . . . 6Filtering System . . . . . . . . . . . . . . . . . . . . . 7Caring for the Dishwasher . . . . . . . . . 7

About Electricity connec tion . . . . . . . . . . 8Water Con nect ion . . . . . . . . . . . . . . . . . . . 9Dimension s . . . . . . . . . . . . . . . . . . . . . . . . 9

Before calling for servic e. . . . . . . . . . 10 ,11

. . . . . . . . . . . . . . . . . . 1

The manufacturer, following a policy of constantdevelopment and up-dating of the product, maymake modifications without giving prior notice.


3/13

This appliance must be grounded. In the eventof a malfunction or breakdown, grounding willreduce the risk of electric shock by providing apath of least resistance of electric current. Thisappliance is equipped with a cord having anequipment-grounding conductor and a groundingplug. The plug must be plugged into an appropriateoutlet that is installed and grounded in accordancewith all local codes and ordinances.

Improper connection of the equipment-grounding conductor can result in a risk

of electric shock. Check with a qualifiedelectrician or service representative if youare in doubt whether the appliance isproperly grounded. Do not modify the plugprovided with the appliance; If it is not fitfor the outlet. Have a proper outlet installedby a qualified electrician.

Under certain conditions, Hyd rogen gas may be produced in a hot-water syste m that has not beenused for two weeks or more. HYDROGEN GAS IS EXPLOSIVE.If the hot-water system has not been used for such a period , before using the dishwash er turn on allhot-water fauce ts and let the water flow from each for several minutes. This wi ll release anyaccumulated hydrog en gas. As the gas is flammable, do not smoke or use an open flame during thistime.

1

Keep children away from detergent and rinse aid, keepchild away from the open door of the dishwasher,there could still be some detergent left inside.

ren Do not abuse, sit on, or stand on the door or dishrack of the dishwasher.

Do not touch the heating element during orimmediately after use.

Do not wash plastic items unless they are markeddishwasher safe or the equivalent. For plasticitems not so marked, check the manufacturer'srecommendations.Use only detergent and rinse additives designedfor an automatic dishwasher. Never use soap,laundry detergent, or hand washing detergentin your dishwasher. Keep these product s out ofthe reach of children.

During installation, the power supply must notbe excessively or dangerously bent or flattened.

The door should not be left in the open positionsince this could present a tripping hazards.

Do not tamper with controls.

Do not operate your dishwasher unless allenclosure panels are properly inplace. Openthe door very carefully if the dishwasher isoperating,there is a risk of water squirting out.

Do not place any heavy objects of stand on the doorwhen it is open. The appliance could tip forward.When loading items to be washed:1) Locate sharp items so that they are not likely to

damage the door seal;2) Load sharp knives with the handles up to reduce

the risk of cut-type injuries.3 Warning:Knives and other utensils with sharp points

must be loaded in the basket with their points downor placed in a horizontal position.

)

When using your dishwasher, you should preventplastic item from contacting with heating element.

If the supply cord is damaged, it must be replacedby the manufacturer or its service agent or asimilarly qualified perso n in order to avoid ahazard.

Please dispose of packing materials properly.Use the dishwasher only for its intended function.

Remove the door to the washing compartment whenremoving an old dishwasher from service or discarding it.

The appliance is not intende d for use by youngchildren or infirm persons without supervision.Dishwasher detergents are strongly alkaline,theycan be extremely dangerous if swallowed.Avoidcontact with skin and eyes and keep childre n awayfrom the dishwasher when the door is open.

Young children should be supervised to ensure thatthey do not play with the appliance.

Check that the detergent receptable is empty aftercompletion of the wash cycle.

Other means for disconnect ion from the supply mustbe incorprated in the fixed wiring with at least 3mmcontact separation in all poles.

The appliance is to be connected to the water mainsusing new hose sets and that old hose-sets sh ouldnot be reused.The maximum number of place settings to be washedis 12.

The maximum permissible inlet water pressure is 1Mpa.

The minimum permissible inlet water pressure is 0.04Mpa.


4/13

NO RM AL E CO NO MY RIN SE L IG HT S OA K

Fast Half

LoadON OFF euro

To get the best performance from your dishwasher,read all operating instructions before using it for thefirst time.

2

1

2 3 4 5

5

6

7 " "Rapid Button: Only used with cycle .

Door Handle: Pull it to open the door.

Washing Program Selector: Turn the knob clockwiseto select wash cycles.

Power/ON Light: To come on when the ON/OFF Button ispressed down.

1

2 3 4

ON/OFF Button: To turn on/off the power supply.

Rinse Aid Warning Light: To come on when rinse aid needsto be refilled.

7

Half washing key-press : To select the half washing.(It means that the lower spray arm does not run,soyou should load the upper basket only ).

6

Upper BasketSpray Arms

Lower Basket

Detergent DispenserSilverware BasketMain Filter

Cup Shelf

5

6

7 8

Rinse Aid Dispenser

Coarse FilterDrain pipe connectorInlet pipe connector

9

10 11

3

2 1 4

11

1

2

3

4

5

6

7

8

9 10


5/13

Your dishwasher has an overfill protection device which could automatica lly shut off the inlet valve and starts the drain pumpif the water level in the unit is detected to be above the normal level. If thi s occurs, turn off the main water supply before calling forservicing. If there is water in the base pan becaus e of an overfill or small leak, the water should be removed befo re restarting thedishwasher.

3

For normally soiled loads,such as , plates,glassesand lightly soiled pans.standard daily cycle.

pots

Pre-wash-wash

Wash (52 )Rinse (70 )Drying

Pre

For lightly soiled loads,suchas plates,glasses,bowls andlightly soiled pans.

For dishes that need to berinsed and dried only.

For lightly soiled loads,such as glasses, crystal andfine china.

To rinse dishes that youplan to wash later that day.

15 g

15 gA shorter wash for lightlysoiled loads that do notneed drying.

Normal

Economy

Rinse

Light

Rapid

Soak

5/25 g

22 gWash (52 )Rinse (70 )Drying

Rinse (70 )Drying

Wash (52 )Rinse (62 )Drying

Wash (52 )Rinse

Pre-wash


6/13

4

Dishwasher detergent is corrosi ve! Take care to keep it outof reach of children.

IF THE WATER ISN'T TOO HARD, YOU MAY ALSO PREVENT THE FORMATION OF DEPOSITS BY ADDING DETERGENT.The amount of detergent need ed can vary due to differences in water hardness. To dete rmine the water hardness in your area,contact your local water utility or area water softening co mpany. The harder the water, the more deterg ent you may need.Remember, you should adjus t the amount of detergent you use by small amount s until you find the correct amount.

To remove hard water spots, try the following:Run dishes through a normal wash prog ram.Remove all metal dishware, such as cutlery, pans, etc.,from the dishwasher.Do not add detergent.Pour two cups of vinegar into a bowl and set the bowl faceup on the lower rack of the dishwasher.Run the dishes through a normal wash progr am.

If this doesn't work, try the same process with 1 / 4 cup ofcitric acid crystals instead of vinegar.

Use only detergent specifically made for use in dishwashers.Keep your detergent fresh and dry. Don't put powder detergentinto the dispenser until You're ready to wash dishes.

The dispense r must be refilled before the start of each wash cycle followin g the instructions provided in the" Wash CycleTa bl e" .Your d is hw ashe rs th an co nv en tio nal d is hw ash ers . Ge ner ally, o nl y o ne ta ble spoo n ofdetergent is needed fo r a normal wash load. Also, more heavily soiled items nee d more detergent. Always add the deterge nt justbefore starting dishwasher , otherwise it could get damp and will not dissolve properly.

use less detergent and rinse aid

To open the dispenser, t urn the cap to the "open" (left)arrow and lift it out.Pour the rinse aid into the dispenser, bein g careful not tooverfill.Replace the cap by inserting it aligne d with "open" arrowand turning it to the closed (right) arrow.

A measured amount of rinse aid is released during the fi nal rinse. As with detergent, the amountof rinse aid needed for your dishes depend s on the hardness of the water in your area. Too muchrinse aid can result in lather of foaming and cause clo udiness or steaks on your dishes . If thewater in your area is very soft, you may not need rinse aid. If you do,you can dilute the rinse ai dwith an equal amount of water.The rinse aid dispenser has six settings . Always start with the dispenser set on " 2 ". If spots andpoor drying are problems, increase the amount of rinse aid dispensed by removing the dispenserlid and rotating the dial to "3". If the dishes still are not drying properly o r are spotted, adjust thedial to the next higher number until your dishes are spot- free. We suggest you to set on "4" .

The rinse aid is released during the final rinse to prevent waterfrom forming drople ts on your dishes that can leave spots andstreaks. It also improves drying by allowing water to "sheet" offthe dishes.

Your dishwashe rs are designed to use liquid rinse aids. Therinse aid dispens er is located inside the door next to thedetergent dispenser. To fill the dispenser, open the cap andpour the rinse aid into the dispenser until the level indicatorturns completel y black. The volume of the rinse aid containe r isabout 140ml.

Be careful not to overfill the dispenser, because this couldcause oversuds ing. Wipe away any spills with a damp cloth.Don't forget to replace the cap befo re you close the dishwasherdoor.If you have soft water, you may not need rinse aid for it maycause a white film to develop o n your dishes.


7/13

5

If there is no rinse aid warning light in the control panel , you can judge the amount of rinse aid by the following means . Theblack dot on the rinse aid dispen ser indicates the amount of rinse aid in the disp enser. As the rinse aid diminishes, the size ofthe black dot decrease s. You should never let the rinse aid get below 1 / 4 full.

As the rinse aid diminishes, the size of the black dot on the rinseaid level indicator changes, as illustrated below.

Full3 / 4 full1 / 2 full1 / 4 full - Should refill to elimina te spottingEmpty

The upper rack is designed to hold more delicate and lighter dishware such as gla sses, coffee and tea cup and saucers, as wellas plates, small bowls and sha llow pans(as long as they are not too dirty).Position the dishes a nd cookware so that they do not get moved by the spray of water.The upper rack can be adjusted for heig ht by putting wheels of different heig ht into the rails.

We recommend that you place large items which are most difficult to clean into the lower rack: pots, pans, lids,serving dishes and bowls, as shown in the figure to the right.It is preferable to place serving dishes and lids on the side of the racks in order to avoid blocking the rotation of thetop spray arm.

Pots, serving bowls, etc, must alway s be placed top down.Deep pots should be slanted to allow water to flow out.

The bottom rack feature fold down tine rows s o that larger or more pots and pans can be loaded.

1 Cups

2 Small serving bowl

3 Large serving bowl

4 Glasses

Saucers 5

6 7

Dish

8 Oval platter

10 Soup plates

Dessert dishes7

9 Dinner plates

11 Silverware basket

Dessert dishes

1

2

3

5

7

6

1

4 4 1

7

8

9

10

10

11


8/13

6

Silverware should be placed in the silverware b asket with handles at the bottom: If the rack has side basket s, the spoon shouldbe loaded individually into the appropriate slots, Especially long utensils should be placed in the horizontal position at thefront of the upper rack.

SC ALE 1.0 0 0

4 4

3

8

2

6 7

4

4

4

5

4

4

4

4

1 1 1

1 1 1

1 1 1

4 4

4

1 1 1

5 5

5 5 5

5 5 5

5 5 5

2 2

2 2 2

2 2 2

2 2 2

3

3

3

3

3

3

3

3

3 3

3

6

Do not let any item extend through botto m.

Teaspoons4

Soup spoons2 Forks1

Serving fork8

Serving spoon6 Knife 5

3 Dessert spoons 7 Gravy ladle

Make sure that the plug for the appliance is inserted int o the wall socket.

Make sure that the water supply is turned on to full pressure.

Load the dishwasher(see the section enti tled, " Loading the Dishwasher " ).Pour in the detergent(see the section ent itled, " Salt, Detergent and Rinse Aid " ).

Turn the knob located on the right of the control panel in the clockwise di rection until the number or the symbol for the cyclesetting is aligned with the reference mark (see the section e ntitled, " Wash Cycle Table " ).

close the door , press the ON/ OFF button, and the ON/OFF light will turn on. At this point, the wash cycle will begin.

2 3 4 5

6

Premise: A cycle that is underway can only be modified if it has only been running for a short time. Otherw ise, the detergent mayhave already been rel eased, and the appliance may have alread y drained the wash water. If this is the case, the detergent disp ensermust be refilled (see the paragrap h entitled " Loading the Detergent " ).Press the ON/OFF button, and the ON light will turn off. Rotate the knob in the clockw ise direction to the desired cycle setting (seethe section entitl ed, " Starting a wash cycle. . . " ). Then, turn the dishwasher back on using the on the ON/OFF button.

1

When the knob stops turning and is aligned with a STOP mark(see figure), the cycle has finishe d .Turn off the appliance us ing the ON/OFF button, shut off the water supply and open the doo r ofthe dishwash er. Wait a few minutes before unloading the dish washer to avoi d handling thedishes and uten sils while they are still hot and more susceptible to breakag e. They will also drybetter.

A forgotten dish can be added any time before the detergent cup opens.

Pull the door handle.Do not open the door until the water spray action stops.Steam may rise out of the dishwasher.

Add forgotten dishes.4 3

2 1

Close the door and make sure the latch has been locked.


9/13

7

Coarse filter

Larger items, such as pieces of bone or glass, that could clog the drain are trapped in thecoarse filter. To remove an item caught in this filter, gent ly squeeze the tabs on top of thisfilter and lift it out.

For your convenience , we have placed the drain pump and filtering syste m within easy reach inside the tub. There are threecomponent s of the filtering system: the main filter, the coarse filter, and the fine filter.

2

Fine filterThis filter holds soil and food residue in the sump area an d prevents it from beingredeposited on the dishes d uring a cycle.

Main filterFood and soil particles trapp ed by this filter are pulverized by a special jet on the lower sprayarm and washed down the drain.

1

3

Never run the dishwasher without the filters in place.

Filter assemblyFor best performance and results, the filter assembly must be cleaned.The filter efficiently remov es food particles from the wash water, allowin g it to berecirculated during the cy cle. For this reason, it is a good idea to remove the largerfood particles trapped in the filter afte r each wash cycle by rinsing the semicircula rfilter and cup under running water. To remov e the filter assembly, pull on the cuphandle in the upward direction. The entire filter assembly should be cleanedonce a week.To clean the coarse filter and the fine filter, use a cleanin g brush. Then, reassemblethe filter parts as shown in the figures left and reinsert the entir e assembly in thedishwasher, positi oning in its seat and pressing downw ard.The dishwasher must never be used without the filters. Improper replacement of thefilter may reduce the performance level of the appliance and damage dishes and utensils.

If your dishwasher is left in an unheated place during the winter, ask a service technician to:

Cut off electrical power to the dishwasher.

Turn off the water supply and disconnect the waterinlet pipe from the water valve.

Drain water from the inlet and water valve.pipe(Use a pan to catch the water.)

Reconnect the water inlet to thewater valve.

pipe

Remove the filter in the tub the bottomand use a sponge to soak up waterin sump.

5

4

3

2

1

It is necessary to clean the spray arms regularly for hard wate r chemicals will clog thespray arm jets and bearings. To remove the spray arm, sc rew off the nut to take out thewasher on top of the spray arm and remove the arm. Wash the arms in soapy and warmwater and use a soft brush to clean the jets. Replace them after rinsing them tho roughly.

ATTENTION: Do not put the fine filte r upside down.


10/13

8

Never use a spray cleaner to clean the door panel for it could damage the door lock and electrical comp onents. It is not allowedto use the abrasive agent or some paper towel beca useof the risk of scratching or leaving spots on the stain less steel surface.

To clean the edge around the door , you should use only a soft warm, damp rag. To preventpenetration of water into the door lock and elect rical components, do not use a spray cleane rof any kind.Also, never use abrasive cleane rs or scouring pads on the outer surfaces bec ause they willscratch the finish. Some papers towe ls can also scratch or leave marks on the surface .

After every wash, turn of f the water supply to theapplia nce and leave the door slightly ajar so thatmoisture and odors are not trapped inside.

Before cleaning or performing maintenance, alwaysremove the plug from the socket. Do not run risks.

To clean the exterior an d rubber parts of the dishwasher,do not use solvents or abrasive cleaning products.Rather, use only a cloth and warm soapy water.To remove spots or stains from the surfac e of theinterior, use a cloth dampen ed with water and a littlewhite vinegar, or a cleaning product made specificallyfor dishwashers.

When you go on holiday, it is recommened that you run awash cycle with the dishwas her empty and then removethe plug from the socket, turn off the water supply andleave the door of the appliance slightly ajar . This will helpthe seals last longer and prevent odors from form ingwithin the appliance.

If the appliance must be moved, try to keep it in the verticalposition.If absolutely necessary, it can be positioned onits back.

One of the factors that cause odors to form in thedishwashe r is food that remains trapped in the seals.Periodic cleaning with a damp sponge will prevent this

from occurring.

Please see the rating lable to know the rating voltage and connect the dishwasher to appropriate power supply,Us e required fuse

12 amp. Fused electrical supply is required-copper wire only. Time delay fuse or circuit breaker recommended and provideseparate circuit serving only this appliance. Outlet should be placed in adjacent cabinet.

After making sure that the voltage and the frequen cy values for the current in the homecorrespond to those on the rating plat e and that the electrical system is sized for themaximum voltage on the rating plate , insert the plug into an electrical socket which isearthed properly. If the electric al socket to which the appliance must be conne cted is notappropriate for the , replace the socket,rather than using a adaptors or the like as

they could cause overheating and burns.plug


11/13

9

If the sink is 1000 higher from the floor, the excess water in hoses cannotbe drained directly into the sink. It will be necessary to drain excesswater from hoses into a bowl or suitable container that is held outside and lowerthan the sink.

Connect the cold water supp ly hose to a threaded 3/4(inch) connec tor and make sure that it isfastened tightly in place.If the water pipes are new or have not been used for an extend ed period of time, let the waterrun to make sure that the water is clear and free of impurities. If this precaution is not taken,there is a risk that the water inlet can get blocked and dam age the appliance.

The water supply to the appliance can also be connected to the house hot water line(centralized system, heating system),as long as it does not exceed a temperature of 60 C.In this case, the wash cycle time will be shortened b y about 15 minutes and the washefficiency slightly reduced.The connection must be made to the hot wate r line following the same procedures as th osefor the connection to the cold water line.

DIMENSIONS(mm)

Insert the drain hose into a drain pipe with a minimum diam eter of 40 mm, or let it run into the sink, making sure to avoid bendingor crimping it. Use the special plastic support that comes with the appliance. The free end of the hose must be at a heightbetween 400 and 1000mm and mu st not be immersed in water.

Once the appliance is positioned,ad just the feet (screwing them in or out) to adjust theheight of the dishwasher, making it level . In any case ,the appliance should not be inclinedmore than 2 .

Position the appliance in the desi red location. The back should rest again st the wall behind it, and the sides, alon g the adjacentcabinets or wall. The dishwa sher is equipped with water supply an d drain hoses that can be positioned to the right or the left tofacilitate proper installation.

600580

850

1135

In order to avoid that there is more waterstaying in the inlet hose,please close the hydrant

after using.(For the models: no safety inlet hose.)


12/13

10

Fuse blown, or thecircuit breaker acted

Replace fuse or reset circuit breaker. Remove any otherappliances sharing the same circuit with the dishwasher

Sound from soft food shredding action and detergent cupopening.

Utensils are not securein the baskets or somethingsmall has dropped intothe basket

To ensure everything is secured in the dishwasher.

Motor hums Dishwasher has not been used regularly. If you do not use itoften, remember to set it to fill and pump out every week,which will help keep the seal moist.

Improper detergent

Add 1 gallon of cold water to the tub. Close and latch thedishwasher, then drain out the water by slowly turning theDial until a drain period is reached. Repeat if necessary.

Spilled rinse agent Always wipe up rinse agentspills immediately.

Detergent withcolorant was used

Make sure that the detergent is the one without colorant.

Rinse agent dispenseris empty

Make sure that the rinse agent dispense is filled.

Improper program

Improper rack loading Make sure that the action of the detergent dispenser andspray arms are not blocked by large dishware.

Extremely hard waterLow inlettemperatureOverloading thedishwasherImproper loadingOld or damp powderdetergent

Empty rinse agentdispenserIncorrect dosage ofdetergent

To remove spots from glassware:Take out all metal utensils out of the dishwasher.Do not add detergent.Choose the longest cycle.Start the dishwasher and allow it to run for about18 to 22 minutes, then it will be in the main wash.Open the door to pour 2 cups of white vinegarinto the bottom of the dishwasher.

Close the door and let the dishwasher completethe cycle. If the vinegar does not work: Repeatas above, except use 1/4 cup (60 ml)of citric acidcrystals instead of vinegar.

Some audible sounds arenormal

'

Make sure the dishwasher is turned on and the door isclosed securely.

Check that the water supply is connected properly andthe water is turned on.The pipe in the right way (hot besnapped).

Make sure the power cord is properly plugged into thewall socket.

Power supply is notturned on

Water pressure is low

' Overflow The system is designed to detect an overflow. When itdoes, it shuts off the circulation pump and turns on thedrain pump.

Select stronger program

Use only the special dishwasher detergent to avoid suds.

If this occurs, open the dishwasher and let suds evaporate.


13/13

11

Combination of softwater and too muchdetergent

Use less detergent if you have soft water and select ashortest cycle to wash the glassware and to get them clean.

Tea or coffee stains using a solution of 1/2 cup of bleach and 3 cups warm waterto remove the stains by hand.

You have to wait for 20 minutes after a cycle to let the heatingelements cool down before cleaning interior; otherwise, burnswill happen.

Iron deposits in watercan cause an overall film

You have to call a water softener company for a special filter.

Hard water minerals To clean the interior, use a damp sponge with dishwasherdetergent and wear rubber gloves. Never use any other cleanerthan dishwasher detergent for the risk of foaming or suds.

Dial is not in theposition

OFF Turn the Dial to OFF position and slide the door latch to theleft.

Dishes block detergentcups

Re-loading the dishes properly.

Normal phenomenon There is some steam coming through the vent by the doorlatch during drying and water draining.

Aluminum utensils haverubbed against dishes

Use a mild abrasive cleaner to eliminate those marks.

'

This is normal A small amount of clean water around the outlet onthe tub bottom at the back of the tub keeps the waterseal lubricated.

Be careful not to overfill the rinse aid dispenser.Spilled rinse aid could cause oversudsing and leadto overflowing. Wipe away any spills with a damp cloth.

Make sure the dishwasher is level.

Overfill dispenser or rinseaid spills

Dishwasher isn t level'

E7DWH-SS Instruction Manual

Documents

Transcript of E7DWH-SS Instruction Manual