E-PAK 500 -...

5
E-PAK 500 Compact high vacuum unit, the ideal solution for removing dust and fumes The compact E-PAK for multi-purpose useThe ideal solution for the extraction of sanding and grindingdust and for welding fumes. Also suitable for cleaning of theworkplace and the shop floor. The E-PAK is a powerful vacuumunit and can serve up to six extraction points, all in use at thesame time.Typical areas of application can be found in welding shops,car body shops, construction industries, bakeries, industriallaundries etc.Power control can be obtained by fitting automatic vacuumvalves to the extraction points. The valves provide suction powerwhen an operation starts. When the work stops and all the valveshave closed again, the E-PAK unit will stop.Low operating costsAutomatic vacuum valves offer substantial energy savings andmake a small unit manage the job otherwise requiring a largeunit. Using automatic valves multiplies the number of workingpoints that can be served, by three to four times.Low noise level is an obvious demand in today’s workingenvironment. E-PAK is developed to fit into normally noisesensitive premises thanks to efficient silencers and acousticenclosure. The enclosure is easily removed for service.Complete and ready to useWe can deliver complete installations but if you prefer to installyour own E-PAK system, this is very easy to do. We can alsooffer accessories like cleaning equipment, vacuum valves, swingarms, welding guns and grinding tools with fume and dustextraction. • Easy to install • Low noise level • Low running and maintenance costs • Low noise level Product name E-PAK 500 Noise level (dB(A)) 67 Compressed air requirement Dry and clean (Ø6 connection) Installation [Indoor] Filter cleaning method Reverse air pulse Applications [dust], [granulate], [grit], [fumes], [swarf] Working pressure (kPa) 15 Max Airflow (m3/h) 860 Filter Area (m2) 3,4 Frequency (Hz) 50 No of phases 3 Filter type [bag] Filter material PTFE Noise level ((dB)A) 67 Max vaccum (kPa) -25 Weight (kg) 333 Power (kW) 13 Granulate Grit Fumes Swarf Dust This content is protected under copyright law, furnished for informational use only, and subject to change without notice. © 2016 Nederman Holding AB www.nederman.com 1 9/23/2017

Transcript of E-PAK 500 -...

E-PAK 500Compact high vacuum unit, the ideal solution for removing dust and fumes

The compact E-PAK for multi-purpose useThe ideal solution for theextraction of sanding and grindingdust and for welding fumes. Alsosuitable for cleaning of theworkplace and the shop floor. The E-PAKis a powerful vacuumunit and can serve up to six extraction points,all in use at thesame time.Typical areas of application can be foundin welding shops,car body shops, construction industries, bakeries,industriallaundries etc.Power control can be obtained by fittingautomatic vacuumvalves to the extraction points. The valves providesuction powerwhen an operation starts. When the work stops and allthe valveshave closed again, the E-PAK unit will stop.Low operatingcostsAutomatic vacuum valves offer substantial energy savingsandmake a small unit manage the job otherwise requiring alargeunit. Using automatic valves multiplies the number ofworkingpoints that can be served, by three to four times.Low noiselevel is an obvious demand in today’s workingenvironment. E-PAK isdeveloped to fit into normally noisesensitive premises thanks toefficient silencers and acousticenclosure. The enclosure is easilyremoved for service.Complete and ready to useWe can delivercomplete installations but if you prefer to installyour own E-PAKsystem, this is very easy to do. We can alsooffer accessories likecleaning equipment, vacuum valves, swingarms, welding guns andgrinding tools with fume and dustextraction.

• Easy to install• Low noise level• Low running and maintenance costs• Low noise level

Product name E-PAK 500Noise level (dB(A)) 67Compressed air requirement Dry and clean (Ø6 connection)Installation [Indoor]Filter cleaning method Reverse air pulseApplications [dust], [granulate], [grit], [fumes],

[swarf]Working pressure (kPa) 15Max Airflow (m3/h) 860Filter Area (m2) 3,4Frequency (Hz) 50No of phases 3Filter type [bag]Filter material PTFENoise level ((dB)A) 67Max vaccum (kPa) -25Weight (kg) 333Power (kW) 13

Granulate Grit Fumes Swarf Dust

This content is protected under copyright law, furnished for informational use only, and subject to change without notice. © 2016 Nederman Holding AB

www.nederman.com 1 9/23/2017

E-PAK 500

This content is protected under copyright law, furnished for informational use only, and subject to change without notice. © 2016 Nederman Holding AB

www.nederman.com 2 9/23/2017

E-PAK 500

Power Voltage (V) Model230 40051420400 40051430

This content is protected under copyright law, furnished for informational use only, and subject to change without notice. © 2016 Nederman Holding AB

www.nederman.com 3 9/23/2017

E-PAK 500

Accessory Part No

Main filter for E-PAK DX with 16 antistatic filter socks. 40376777

Silencer LT100 discharge 40139081

Bend spiro BU 100mm 90dgr 40130820

Grating spiro 100mm 40130220

This content is protected under copyright law, furnished for informational use only, and subject to change without notice. © 2016 Nederman Holding AB

www.nederman.com 4 9/23/2017

E-PAK 500

*) outlet diameter inner/outer (spiro)

**) inlet outer diameter

This content is protected under copyright law, furnished for informational use only, and subject to change without notice. © 2016 Nederman Holding AB

www.nederman.com 5 9/23/2017