DYNAPAC LT800...7 Handle Atlas Copco Construction Tools AB SLT800-2EN2 Item Part No Rem Qty...

DYNAPAC

SPARE PARTSCATALOGUE

Atlas Copco Construction Tools AB SE-105 23 Stockholm, Sweden

LT800

SLT800-2EN2

Spare Parts Catalogue

We reserve the right to change specifications without notice.Printed in Sweden.

I

Valid from serial number:

Engines:

RammerLT 800

SLT800-2EN1 2009 - 03 Replaced by SLT800-2EN2SLT800-2EN2 2009 - 04

For machine serialnumber up to *-78001679*, use spare partscatalogue SLT800-1ENx

Hatz 1B20

SLT800-2EN2

Published catalogue issues valid for these rammer:Catalogue Issue date

*78001680*-

ORDERING SPARE PARTSTo avoid errors in delivery, please give the followinginformation when ordering spare parts:1. Type of machine.2. Roller serial number.3. Quantity required.4. Part number.5. Parts denomination.6. Dimensions when ordering per length.

RESERVDELSBESTÄLLNINGFöljande uppgifter ska lämnas vid beställning av reserv-delar för att undvika leveransfel:1. Maskintyp.2. Vältens serienummer.3. Antal av önskad reservdel.4. Reserdelens artikelnummer.5. Reservdelens benämning.6. Måttuppgifter vid beställning av metervara.

ERSATZTEILBESTELLUNGZur Vermeidung von Fehllieferungen sind bei der Bestel-lung von Ersatzteilen folgende Angaben zu machen:1. Maschinentyp.2. Herstellungsnummer.3. Bestellmenge. (Quantity)4. Ersatzteilnummer. (Part Nº)5. Ersatzteilbenennung. (Denomination)6. Massangaben bei Bestellung von Meterware.

ORDINI DI RICAMBIPer evitare errori nelle consegne di ricambi, Vi preghiamodi comunicarci le seguenti informazioni al momento dell'ordinazione:1. Tipo di macchina.2. Numero di serie della macchina.3. Quantità dei pezzi desiderati. (Quantity)4. Numero di codice del pezzo. (Part Nº)5. Descrizione del pezzo di ricambio. (Denomination)6. Misura, in caso di ordine per metro.

PEDIDO DE RECAMBIOSPara evitar errores en las entregas, deberán indicarse lossiguientes datos al hacer un pedido de recambios:1. Tipo de máquina.2. Número de serie.3. Cantidad de piezas deseadas. (Quantity)4. Número de artículo de la pieza de recambio. (Part Nº)5. Denominación de la pieza. (Denomination)6. Indíquese la medida al solicitar un artículo que se

expide por metros.

COMMANDE DE PIECES DE RECHANGELes indications suivantes doivent être fournies lors de lacommande de piéces de rechange, afin d'éviter toute erreurde livraison:1. Type de machine.2. Numéro de série.3. Quantité désirée de pièce de rechange. (Quantity)4. Numéro de la piéce de rechange. (Part Nº)5. Dénomination de la piéce de rechange. (Denomination)6. Longueur en cas de commande au mètre.

YOUR AGENT/DEALER:

II

III

Notes

GROUP PAGE NOTESPARTS SERVICEINFO INFO

Changes

31

1

Text pagesThe text pages is structured as thepicture on the right.1. This is the remarks forspecific items and the descriptionsof the remarks is at the bottom ofthe parts list.2. Parts indicated by a dot andmoved to the right are includedwhen buying the assembled unitabove.3. Spare parts and service codefor a specific part, mainly forinternal use at Dynapac. "A" =Service part, "B" = Fast movingpart, "C" = Suggested exchangedpart and "D" = Regular spare part.

2

besane

Rectangle

Notes

IV

Catalogue

1.

PÄRMETIKETTFör att undvika fel vid reservdelsbeställning finns härnedan två etiketter som passar i fickorna på pärmarnasryggar. På dessa kan man se från vilket vältnummer avaktuell maskin reservdelskatalogen gäller. Gör så här:1. Tag denna sida ur pärmen.2. Klipp ut etiketten till VÄNSTER (1) och sätt in den i

fickan på DENNA pärmens rygg.3. Finns det en etikett till HÖGER (2), kan denna an-

vändas på pärmen för FÖREGÅENDE utgåva avdenna katalog.

4. Kasta detta papper.

BINDER LABELTo avoid errors when ordering spare parts use the labelsbelow to identify the catalogues on the back of thebinder. The label contain the serial number range forwhich the catalogue is valid. Do like this:1. Remove this page from the binder.2. Cut out the LEFT label (1) and put it on THIS binders

back.3. If there is a label to the RIGHT (2), it can be used on

thebinder for PRECEDING issue of this catalogue.4. Throw away this paper.

KATALOG-BESCHRIFTUNGZur Vermeidung von Fehlen bei der Ersatzteilbestellungbenutzen Sie bitte die unteren Beschriftungen, um dieKataloge auf der Rückseite zu kennzeichen. Auf derBeschriftung ist angegaben, für welcheMaschinennummern der jeweilige Katalog gültig ist.Ablauf:1. Nehmen Sie dieses Blatt aus dem Katalog.2. Schneiden Sie die LINKE Beschriftung (1) aus. Schie-

ben Sie die Beschriftung in die tasche auf DEMKatalogrücke.

3. Sollte die Beschriftung unten RECHTS (2) mitgeliefertwerden, kennzeichen Sie damit bitte die ÄLTEREAusführung dieses Kataloges.

4. Den Rest dieses Blattes bitte vernichten.

ETICHETTA POSTA SUL RACCOGLITOREPer evitare errori quando ordinate pezzi di ricambio, usatele etichette in calce che servono ad identificare i cataloghisul retro del raccoglitore. L'etichetta indica il numero dimatricola delle maccine prese in considerazione nel catalo-go.1. Rimuovete questa pagina dal raccoglitore.2. Ritagliate l'etichetta posta a SINISTRA (1) e ponetela

sul retro DEL raccoglitore.3. Se trovate anche un'etichetta sulla DESTRA (2),

ritagliatela e ponetela sul raccoglitore relativo allaPRECEDENTE edizione del catalogo.

4. Distruggete questo foglio.

ETIQUETAGE DU CATALOGUEAfin d'éviter des erreurs lors de commandes de pièces derechange, nous vous conseillons d'apposer les marquagesci-dessous à l'arrière du classeur, pour identifier les catalo-gues. Ce marquage indique les numéros de série pourlesquels le catalogue est adapté. Il convient de procéder dela façon suivante:1. Retirez cette page du classeur.2. Découpez l'étiquette de GAUCHE (1), et apposez-la à

l'arrière de CE catalogue.3. Si il y a une étiquette à DROITE (2), vous pourrez

l'apposer sur le classeur de l'edition PRECEDENTE ducatalogue.

4. Détruire cetta feuille.

ETIQUETA PARA LA CARPETAPara evitar errores al pedir repuestos utilicen las etiquetasabajo descritas para identificar los catálogos en la partetrasera de la carpeta. En la etiqueta se ven los númerosde referencia de la serie para la cual es válido el catálogo.Instrucciones:1. Quitar esta página de la carpeta.2. Corta la etiqueta IZQUIERDA (1) y ponerla est ESTA

carpeta en la parte trasera.3. Si hay una etiqueta en la parte DERECHA (2) se puede

utilizar en la carpeta para el catálogo que PRECEDEaesta.

4. Tirar esta hoja.

V

SLT800-2EN2

TC 1

TABLE OF CONTENTS PageAtlas Copco Construction Tools AB

LT800 From S/N: 78001680- 2

Handle 4Handle 6

Ramming system 8Transmission 10Spring unit 12Foot 11" 14Foot 13" 16Option, extended foot 18

Engine and fuel system 20Engine Hatz 1B20 22Fuel system 26

Power transmission 28Engine installation 30Clutch 32

Decals and documentation 34Decals and documentation 36

2

LT800 From S/N: 78001680-LT800100

Atlas Copco Construction Tools AB

SLT800-2EN2

3

LT800 From S/N: 78001680-Atlas Copco Construction Tools AB

SLT800-2EN2

CodePart NoItem Qty DescriptionRem10 Handle ( Page 4 )20 Ramming system ( Page 8 )30 Engine and fuel system ( Page 20 )40 Power transmission ( Page 28 )80 Decals and documentation ( Page 34 )

4

HandleAtlas Copco Construction Tools AB

SLT800-2EN2

5


SLT800-2EN2

CodePart NoItem Qty DescriptionRem10 Handle ( Page 6 )

1

6

Handle18984


SLT800-2EN2

7


SLT800-2EN2

CodePart NoItem Qty DescriptionRem1 4700386127 Handle12 A Fuel tank13 4700395420 Throttle control, cpl1

4812155279 .Handle14812155280 .Control cable, cpl1

4 4700384496 Roller25 4700500506 Screw46 4700586002 Lock nut M6 -847 4700508018 Screw48 4700385439 Lifting lug19 4700500508 Screw2

10 4700791343 Screw211 4700500506 Screw212 4700904504 Screw M5 x 18213 4700902286 Lock nut M8814 4700902284 Nut M5215 4700390462 Bracket116 4700902041 Screw417 4700586003 Lock nut M8618 4700386787 Angle stop right side119 4700386786 Angle stop left side120 4700500505 Screw M8x20 8.8421 4700791323 Cylindric pin422 4700386785 Shock absorber223 4700313041 Cable ties1

A) See section fuelsystem

8

Ramming systemAtlas Copco Construction Tools AB

SLT800-2EN2

9

Ramming systemAtlas Copco Construction Tools AB

SLT800-2EN2

CodePart NoItem Qty DescriptionRem10 Transmission ( Page 10 )20 Spring unit ( Page 12 )30 Foot 11" ( Page 14 )40 Foot 13" ( Page 16 )50 Option, extended foot ( Page 18 )

10

Transmission17474-1


SLT800-2EN2

11

TransmissionAtlas Copco Construction Tools AB

SLT800-2EN2

CodePart NoItem Qty DescriptionRem1 4700381965 Gear wheel12 4700904950 Needle bearing13 4700380920 Connecting rod14 4700111078 Ball bearing15 4700150009 Snap ring16 4700904949 Needle bearing17 4700150014 DSnap ring28 4700903520 Bearing29 4700151025 Snap ring2

10 4700904952 Sealing111 4700381964 Shaft112 4700500021 Screw M8-1,25x25 8.8113 4700904734 Washer 8,4x26x4114 Clutch115 4700388403 Crankcase116 4700160106 O-ring117 4700388405 Cover118 4700508096 Screw419 4700628006 Pin120 4700160035 O-ring121 4700904230 Washer422 4700508053 Screw423 4700388407 Outer tube1

12

Spring unit17380-1


SLT800-2EN2

13

Spring unitAtlas Copco Construction Tools AB

SLT800-2EN2

CodePart NoItem Qty DescriptionRem1 A Crank shaft12 4700381482 Plug23 4700381479 Piston bolt14 B Outer tube15 4700381961 Rod piston head16 4700383681 Lid17 4700380895 Spring28 4700380894 Spring29 4700380899 Stop1

10 4700383668 Rod piston111 4700380902 Stop112 4700283631 Hose clamp213 4700500023 Screw M8-1,25x40 8,8214 4700283627 Bellows115 4700508092 Screw1316 4700388409 Bellows support117 4700791395 Sight plug118 4700383666 Gasket119 4700383669 Inner tube120 4700384416 Handle121 4700904951 Plug122 4700160054 O-ring123 4700382369 Lid124 4700162009 DSeal ring625 C DNut626 C DFoot127 4700791376 Fiber washer1

A) See section transmission. item 3B) See section transmission, item 28C) See section foot

14

Foot 11"17477


SLT800-2EN2

15

Foot 11"Atlas Copco Construction Tools AB

SLT800-2EN2

CodePart NoItem Qty DescriptionRem4700939183 Foot kit, cpl1

1 4700382371 .Ground plate12 4700382366 A .Foot13 4700791331 .Screw84 4700902286 .Lock nut M885 4700791339 .Screw26 4700791085 .Screw27 4700791337 .Screw28 4700902288 .Nut M1269 4700904640 .Washer 8,4x22x37

A) Widht = 11"

16

Foot 13"17478


SLT800-2EN2

17

Foot 13"Atlas Copco Construction Tools AB

SLT800-2EN2

CodePart NoItem Qty DescriptionRem4700939184 Foot kit, cpl1

1 4700382982 .Ground plate12 4700382981 A .Foot13 4700791331 .Screw144 4700902286 .Lock nut M8145 4700791339 .Screw26 4700791085 .Screw27 4700791337 .Screw28 4700902288 .Nut M1269 4700904640 .Washer 8,4x22x314

A) Widht = 13"

18

Option, extended foot18069


SLT800-2EN2

19

Option, extended footAtlas Copco Construction Tools AB

SLT800-2EN2

CodePart NoItem Qty DescriptionRem1 4700389980 Extended foot12 4700928198 Screw23 4700903735 Screw44 4700902280 Side ring65 4700904231 Washer 13x24x2 300 HV66 4700377125 Decal1

20

Engine and fuel systemAtlas Copco Construction Tools AB

SLT800-2EN2

21

Engine and fuel systemAtlas Copco Construction Tools AB

SLT800-2EN2

CodePart NoItem Qty DescriptionRem10 Engine ( Page 22 ) Hatz 1B2020 Fuel system ( Page 26 )

22

Engine Hatz 1B2016837


SLT800-2EN2

23

Engine Hatz 1B20Atlas Copco Construction Tools AB

SLT800-2EN2

CodePart NoItem Qty DescriptionRem1 4700393835 Engine, cpl Hatz 1B2012 .Not used on this model13 4700937002 D.Plug14 4700937003 B.O-ring15 4700937001 Oil strainer, cpl6 Not used on this model7 4700936982 D.Recoil starter, cpl18 4700936983 A B..Knob19 4700936985 B..Spiral spring1

10 4700936986 ..Housing111 4700936987 ..Washer412 4700936988 ..Screw413 4700936989 B..Rope114 4700936990 B ..Reel115 4700936991 B..Spring116 4700936992 ..Friction plate117 4700936993 ..Screw118 4700936994 ..Washer119 4700936995 ..Ratchet120 4700936996 ..O-ring121 4700936997 ..Screw322 4700936998 ..Washer323 4700936999 .Starter pulley124 4700937000 .Decal125 .Air filter126 4700937011 .Washer127 4700937012 .Screw328 4700938150 A.Filter element129 4700937014 .Nut130 4700938151 .Protecting cover131 4700937016 .Rubber sleeve132 4700937017 .Nut133 4700937018 .Plate134 4700937019 .Rubber hose135 4700937020 .Edge trim136 4700239517 .Washer237 4700938152 .Air filter house138 4700937022 .Gasket239 4700937023 .Gasket140 4700937024 .Vent nipple141 4700937010 .Edge trim142 4700938155 .Protecting cover143 4700937008 .Edge trim144 4700937009 .Muffler145 4700937005 .Exhaust tube146 4700937004 .Exhaust pipe147 4700937006 .Gasket5

.149 4700936977 .O-ring 0,2 mm150 4700936978 .O-ring 0,3 mm151 4700936979 .O-ring 0,4 mm152 4700936980 .O-ring 0,5 mm153 4700936981 .O-ring 0,6 mm154 4700937608 D .Oil dipstick155 4700937607 C .Nozzle156 4700937606 Sleeve1

A) Complete with rope and rubber sleeveB) Complete with item 19C) For engine marked "EPA"D) Complete with O-ring

24

Engine Hatz 1B2016837


SLT800-2EN2

25

Engine Hatz 1B20Atlas Copco Construction Tools AB

SLT800-2EN2

CodePart NoItem Qty DescriptionRem57 4700937604 Lock158 4700937605 Socket1

26

Fuel system18983


SLT800-2EN2

27

Fuel systemAtlas Copco Construction Tools AB

SLT800-2EN2

CodePart NoItem Qty DescriptionRem2 4700950307 Filler cap13 D396066-02 Tank14 4700791270 Washer15 4700385839 Nipple16 4700902286 Lock nut M827 4700500505 Screw M8x20 8.828 4700921119 Pipe clamp29 4700937430 Fuel filter1

10 4700945778 A Fuel hose111 4700950241 B Fuel hose112 4700945780 C Fuel hose113 4700904394 Hose clamp1

A) 12x35B) 12x460C) 10x240

28

Power transmissionAtlas Copco Construction Tools AB

SLT800-2EN2

29

Power transmissionAtlas Copco Construction Tools AB

SLT800-2EN2

CodePart NoItem Qty DescriptionRem10 Engine installation ( Page 30 )20 Clutch ( Page 32 )

30

Engine installation18982


SLT800-2EN2

31

Engine installationAtlas Copco Construction Tools AB

SLT800-2EN2

CodePart NoItem Qty DescriptionRem1 Engine12 Clutch ( Page 32 )3 4700904734 Washer 8,4x26x414 4700500021 Screw M8-1,25x25 8.815 4700387883 Adapter16 4700387444 Stud27 4700586018 Lock nut38 4700500023 Screw M8-1,25x40 8,829 4700904229 Washer 8,4x16x1,58

10 4700382363 Bracket211 4700508030 Screw412 4700387443 Stud213 4700387727 Support washer114 4700904230 Washer115 4700388374 Bracket116 4700388373 Bracket117 4700508092 Screw418 4700390558 Cover119 4700393826 Spacer120 4700508069 Screw121 4700791172 Lock nut122 4700603009 Washer1

32

Clutch17384


SLT800-2EN2

33

ClutchAtlas Copco Construction Tools AB

SLT800-2EN2

CodePart NoItem Qty DescriptionRem1 4700381962 Clutch, cpl12 4700239820 .Cover23 4700938289 .Clutch lining24 4700938652 .Centrifugal weight25 4700239734 .Retaining ring26 4700937954 .Spring27 4700938961 .Hub1

34

Decals and documentationAtlas Copco Construction Tools AB

SLT800-2EN2

35


SLT800-2EN2

CodePart NoItem Qty DescriptionRem10 Decals and documentation ( Page 36 )

36

Decals and documentation17382


SLT800-2EN2

37


SLT800-2EN2

CodePart NoItem Qty DescriptionRem1 Not used on this model2 4700386335 Decal "LT800"23 4700386225 Decal1

4700791351 Drive screw44 4700904977 Decal15 47281270SE Product identification plate CE16 4700527002 Drive screw47 4700281269 Decal "LIFT"28 4700385877 Decal "THROTTLE CONTROL"19 4700791088 Decal1

10 4700904366 Safety decal "Hot surface"111 Not used on this model12 4700791295 Decal "Sound power level" 107dB113 Documentation1

.Instruction book, Hatz1

.Operation ILT8001

.Spare parts catalogue SLT8001

.Warranty registration certificate1

.Warranty conditions1

.CE declaration1

NI 1

Part Number Page Part Number Page Part Number Page

NUMERICAL INDEXAtlas Copco Construction Tools ABSLT800-2EN2

4700111078 114700150009 114700150014 114700151025 114700160035 114700160054 134700160106 114700162009 134700239517 234700239734 334700239820 334700281269 374700283627 134700283631 134700313041 74700377125 194700380894 134700380895 134700380899 134700380902 134700380920 114700381479 134700381482 134700381961 134700381962 334700381964 114700381965 114700382363 314700382366 154700382369 134700382371 154700382981 174700382982 174700383666 134700383668 134700383669 134700383681 134700384416 134700384496 74700385439 74700385839 274700385877 374700386127 74700386225 374700386335 374700386785 74700386786 74700386787 74700387443 314700387444 314700387727 314700387883 314700388373 314700388374 314700388403 114700388405 114700388407 114700388409 134700389980 194700390462 74700390558 314700393826 31

4700393835 234700395420 74700500021 11,314700500023 13,314700500505 7,274700500506 74700500508 74700508018 74700508030 314700508053 114700508069 314700508092 13,314700508096 114700527002 374700586002 74700586003 74700586018 314700603009 314700628006 114700791085 15,174700791088 374700791172 314700791270 274700791295 374700791323 74700791331 15,174700791337 15,174700791339 15,174700791343 74700791351 374700791376 134700791395 134700902041 74700902280 194700902284 74700902286 7,15,17,274700902288 15,174700903520 114700903735 194700904229 314700904230 11,314700904231 194700904366 374700904394 274700904504 74700904640 15,174700904734 11,314700904949 114700904950 114700904951 134700904952 114700904977 374700921119 274700928198 194700936977 234700936978 234700936979 234700936980 234700936981 234700936982 234700936983 234700936985 23

4700936986 234700936987 234700936988 234700936989 234700936990 234700936991 234700936992 234700936993 234700936994 234700936995 234700936996 234700936997 234700936998 234700936999 234700937000 234700937001 234700937002 234700937003 234700937004 234700937005 234700937006 234700937008 234700937009 234700937010 234700937011 234700937012 234700937014 234700937016 234700937017 234700937018 234700937019 234700937020 234700937022 234700937023 234700937024 234700937430 274700937604 234700937605 254700937606 234700937607 234700937608 234700937954 334700938150 234700938151 234700938152 234700938155 234700938289 334700938652 334700938961 334700939183 154700939184 174700945778 274700945780 274700950241 274700950307 2747281270SE 374812155279 74812155280 7D396066-02 27

DYNAPAC LT800...7 Handle Atlas Copco Construction Tools AB SLT800-2EN2 Item Part No Rem Qty...

Documents

Transcript of DYNAPAC LT800...7 Handle Atlas Copco Construction Tools AB SLT800-2EN2 Item Part No Rem Qty...