Duke Energy Strategic Energy Management Planning · PDF fileDuke Energy Strategic Energy...
Transcript of Duke Energy Strategic Energy Management Planning · PDF fileDuke Energy Strategic Energy...
A World of SolutionsA World of Solutions
Duke Energy
Strategic Energy Management Planning (SEMP) Program
For Water/Wastewater Plants
1A World of SolutionsTM
Sam Carrara; PE, CEM, LEED AP O+MSenior Energy Engineer – East Coast LeadEnvironmental & InfrastructureCB&I
Presenters
Maryanne McGowan, CPA, CEMManager, Business Strategy & ImplementationDuke Energy
Patsy DuggerDirector; Energy and SustainabilityEnvironmental & InfrastructureCB&I
2A World of SolutionsTM
Introduction to Strategic Energy Management
Benefits of Strategic Energy Management
Duke SEMP Program Overview
One-2-Five® Software
Program Results
Next Steps
Questions
Agenda
A World of Solutions 3
What is Strategic Energy Management? Strategic Energy Management refers to implementing systematic business practices which support measurable and continuous improvement in energy management.
A World of Solutions 4
Benefits: Sets a Framework for Continuous Energy Savings
Traditional Approach SEMP Approachvs.
• Tactical, project basis• No context of ongoing management
system• No long-term sustainability• Authorities not commensurate with
level of responsibility or accountability
• Strategic, program basis• Integrated into business processes• Continuous improvement
framework• Addresses business structure,
processes, people, and systems• Longer term energy and cost savings
A World of Solutions 5
Strategic Energy Management - Continuous Improvement
“You can’t manage what you don’t measure”
COMMIT
ASSESS
PLAN
EVALUATE
IMPLEMENTModifyBuild Awareness
and Reward
Achievement
A World of Solutions 6
The Strategic Energy Management Continuum
Chart Reference: DOE SEP website - http://superiorenergyperformance.energy.gov/
(Superior Energy
Performance
Certification
Program)
ManagementFundamental Energy
A World of Solutions 7
Duke Strategic Energy Management Planning Program
Available only for Duke’s large assigned accounts
Sponsored and subsidized by Duke to support customized strategic energy plan development and alignment with available programs and services
Assessment addresses needs and opportunities in:– Energy Efficiency and Demand Response
– Metering, monitoring, tracking and reporting
– Plant Operations and Maintenance
– Employee training and engagement
– Power Reliability
– Power Quality
– Back-up Generation
– Supply Management
A World of Solutions 8
Duke SEMP Program Process
SEMP Diagnostic
Workshop, Gap Analysis +
Prioritization Discussion
Brief Facility Walk
Through
Benchmark against
your industry
Develop SEMP
Strategic Action Plan
Customized Implementation
Support and templates
Day of Assessment 2 - 4 Weeks Up to 30 hours
Follow-up Diagnostic Workshop
6 – 12 Months After First Session
+
A World of Solutions 9
After the diagnostic session and initial planning day:
– Follow up with established key points of contact to finalize action plan
– Determine high priority areas that require CB&I follow up implementation support, up to 30 hours
– Implement action plan
– Re-assess in 6-12 months
Program Process – Plan Finalization and Implementation
A World of Solutions 10
Program Benefits Water/Wastewater Plants
Establish a Plan: Creates a clear action plan for internal use, as well as to get
support from Duke on EE, Demand response, power quality, new facilities
planning, etc.
Increase Energy and Cost Savings: Drives continuous energy savings from
one of the most energy intensive operations under local government control.
Improve Reliability; Addresses whole facility energy issues like power quality,
reliability, backup generation and procurement.
Train Employees: Creates a platform to train and engage employees on goals,
policies, procedures, KPI and data tracking and reporting, O&M best practices.
This drives low cost energy savings.
Share Best Practices: Often used to share best practices btw facilities/plants.
Show Leadership: Demonstrates energy/environmental leadership; Supports
public relations.
Optimize Incentives and Support: Helps ensures you are optimizing Duke
incentives and programs that support your energy objectives around efficiency,
demand response, power quality, new facilities planning, etc.
A World of Solutions 11
Benefits: Better Plants Challenge Results
• Leading manufacturers and plants are working with DOE through the “Better
Plants” program to:
• Improve their energy intensity, usually by 25% over ten years
• Develop energy management plans
• Track and report their annual progress
• The average energy intensity improvement rate has exceeded the 2.5% per year
benchmark rate required to stay on track with the program’s long-term 25% goal.
Reference: http://energy.gov/eere/amo/better-plants
A World of Solutions 12
Program Process: EnVinta One-2-Five® Diagnostic
A World of Solutions 13
Program Process: EnVinta One-2-Five® Diagnostic
A World of Solutions 14
Program Process: Performance Rating
Majority of participants will fall into the 1-2 star range.
A World of Solutions 15
Program Process: Rating by Element
A World of Solutions 16
Program Process: Benchmarking
Compare your performance in each element to:– Industry best practice– Average performance across industries– Average performance in your industry division
Element Analysis; Water/Wastewater
A World of Solutions 17
Leadership
– Demonstrate corporate commitment through policy creation and goal setting
Understanding
– Benchmark energy usage/intensity against others in the industry or against other sites within the company
Planning
– Develop and maintain list of energy improvement projects and review opportunities on a regular basis
People
– Conduct energy awareness trainings for staff and review ways staff can impact and improve energy usage
– Recruit/train staff that are suitably skilled for energy management activities
– Assign responsible parties for energy management of facility/operations line and establish incentive program for meeting reduction goals
Financial Management
– Review and consider third-party financing for energy reduction projects
Supply Management
– Develop guidelines for equipment selection and maintenance. Inform suppliers and subcontractors of energy requirements
Operations and Maintenance
– Review and modify equipment shutdown procedures
Plant and Equipment
– Conduct energy audit
Monitoring and Reporting
– Establish energy consumption reports, reporting structure/process, meeting times, and goal tracking for operations/product lines
Achievement
– Quantify environmental impact of energy usage and savings (GHG reporting)
Program Process: Sample Action Items
A World of Solutions 18
Next Steps
1. Customer Agreement
2. Participation fee of $11,900 which includes: License for the One-2-Five® software
On-site facilitation of the diagnostic assessment
Planning meetings to finalize critical action items
Strategic Action Plan
Implementation Support (up to 30 hrs)
Follow-up assessment 6 -12 months after the initial assessment.
3. Schedule One-2-Five diagnostic assessment
Provide general company information and basic energy consumption data prior to
assessment session
4. Select participants for diagnostic assessment
Owner executive management team, maintenance, engineering, financial, etc.
A World of SolutionsA World of Solutions
Questions?