dse157-data-sheet-us
2
® SPECIFICATION ENVIRONMENTAL TESTING STANDARDS ELECTRO MAGNETIC CAPABILITY (EMC) BS EN 61000-6-4 EMC Generic Emission Standard for the Industrial Environment BS EN 61000-6-2 EMC Generic Immunity Standard for the Industrial Environment ELECTRICAL SAFETY BS EN 60950 Safety of Information Technology Equipment including Electrical Business Equipment TEMPERATURE BS EN 60068-2-2 Test Ab to 70 o C Test Ab to -30 o C VIBRATION BS EN 60068-2-6 Ten sweeps in each of the three major axes 5Hz to 8Hz @ +/- 7.5mm HUMIDITY BS EN 60068-2-30 Test Db 95% RH @ 55 o C for 12 hours SHOCK BS EN 60068-2-27 Three shocks in each of three major axes 15gn in 11mS DC SUPPLY The DSE157 is powered from the plant battery or from a low voltage supply between 8V and 35V continuous. It is able to survive 0V for 50ms during cranking, providing supply was at least 10V before dropout and supply recovers to 5V. This is achieved without the need for internal batteries. MAXIMUM OPERATING CURRENT 120mA @ 12V, 70mA @ 24V MAXIMUM STANDBY CURRENT 25mA @ 12V, 18mA @ 24V AUXILIARY RELAY CONTACTS 5Amp DC rated voltage free DIMENSIONS DIN Rail mounted housing 72mm x 160mm x 77mm 2.8” x 6.3” x 3” SELECTOR SWITCHES Test - Operates all relays to test operation Unused - No function Enable Lamp Test - Relays will energise on receipt of a lamp test signal from host module A/B Select - Determines whether the 157 responds to signals for expansion A or B relays INDICATIONS Lit LED - Power On Flashing LED - Link lost (to controller) 8 Relay active LED’s DSE EXTRA ® BATTERY CHARGERS AND EXPANSION MODULES. DSE157 OUTPUT RELAY EXPANSION MODULE The DSE157 is an output relay expansion module for use with DSEControl® and DSEPower® Series Modules (excluding DSE51xx). The DSE157 has been designed to extend a host modules output capabilities. The additional capabilities allow OEM’s to meet increasingly complex industry specifications. The module incorporates ‘DIN’ rail mountings and an interconnecting FCC 68 cable, allowing quick fixing into a panel. The module will work up to 50 meters from the host control module. FEATURES • 8 configurable relay contacts • Plug and socket host connection for quick and easy set-up • Two DSE157 modules can be linked together to provide 16 additional outputs (DSE53xx and DSE55xx modules only). CONFIGURATION The DSE157 is configured via the host control module and PC software. Relay contacts can be configured to be either: • de-energised - open on command • energised - close on command When using two DSE157’s together, each module needs to be identified as either ‘A’ or ‘B’. This can be done via the small selector switch on the circuit board.
description
http://www.esgon-ce.es/files/dse157-data-sheet-us.pdf
Transcript of dse157-data-sheet-us
®
SPECIFICATION
ENVIRONMENTAL TESTINGSTANDARDS
ELECTROMAGNETIC CAPABILITY (EMC)BS EN 61000-6-4EMC Generic Emission Standard for theIndustrial EnvironmentBS EN 61000-6-2EMC Generic Immunity Standard for theIndustrial Environment
ELECTRICAL SAFETYBS EN 60950Safety of Information Technology Equipmentincluding Electrical Business Equipment
TEMPERATUREBS EN 60068-2-2Test Ab to 70oCTest Ab to -30oC
VIBRATIONBS EN 60068-2-6Ten sweeps in each of the three major axes5Hz to 8Hz @ +/- 7.5mm
HUMIDITYBS EN 60068-2-30Test Db 95% RH @ 55oC for 12 hours
SHOCKBS EN 60068-2-27Three shocks in each of three major axes15gn in 11mS
DC SUPPLYThe DSE157 is powered from the plant batteryor from a low voltage supply between 8V and35V continuous. It is able to survive 0V for 50msduring cranking, providing supply was at least10V before dropout and supply recovers to 5V.This is achieved without the need for internalbatteries.
MAXIMUMOPERATINGCURRENT120mA @ 12V, 70mA @ 24V
MAXIMUMSTANDBYCURRENT25mA @ 12V, 18mA @ 24V
AUXILIARY RELAY CONTACTS5Amp DC rated voltage free
DIMENSIONSDIN Rail mounted housing72mm x 160mm x 77mm2.8” x 6.3” x 3”
SELECTOR SWITCHESTest - Operates all relays to test operationUnused - No functionEnable Lamp Test - Relays will energise onreceipt of a lamp test signal from host moduleA/B Select - Determines whether the 157responds to signals for expansion A or B relays
INDICATIONSLit LED - Power OnFlashing LED - Link lost (to controller)8 Relay active LED’s
DSEEXTRA®
BATTERYCHARGERSAND EXPANSIONMODULES.DSE157OUTPUT RELAY EXPANSIONMODULE
The DSE157 is an output relayexpansion module for use withDSEControl® and DSEPower®Series Modules (excludingDSE51xx).
The DSE157 has been designedto extend a host modules outputcapabilities. The additionalcapabilities allow OEM’s to meetincreasingly complex industryspecifications.
The module incorporates ‘DIN’ railmountings and an interconnectingFCC 68 cable, allowing quick fixinginto a panel. The module will workup to 50 meters from the hostcontrol module.
FEATURES• 8 configurable relay contacts• Plug and socket host connectionfor quick and easy set-up
• Two DSE157 modules can belinked together to provide 16additional outputs (DSE53xx andDSE55xx modules only).
CONFIGURATIONThe DSE157 is configured via the hostcontrol module and PC software.
Relay contacts can be configured tobe either:• de-energised - open on command• energised - close on command
When using two DSE157’s together,each module needs to be identifiedas either ‘A’ or ‘B’. This can be donevia the small selector switch on thecircuit board.
- +
BATTERY
BATTERY -VE BATTERY +VE(12 OR 24 VDC)
-V
E
+V
E
2A
MP
SA
NT
I-S
UR
GE
FUS
E
RL8B RL8A RL7B RL7A RL6B RL6A RL5B RL5A RL4B RL4A RL3B RL3A RL2B RL2A RL1B RL1A
TO FURTHEREXPANSION
RELAY EXPANSION
TO CONTROLLER
®
DSE157
TITLE PART NO’SDSE5510 data sheet 055-039DSE5510 manual 057-015DSE5520 data sheet 055-040DSE5520 manual 057-016DSE5560 data sheet 055-041DSE5560 manual 057-017
DEEP SEA ELECTRONICS INCUSA3230 Williams AvenueRockfordIL 61101-2668 USA
TELEPHONE+1 (815) 316 8706
FACSIMILE+1 (815) 316 8708
WEBSITEwww.deepseausa.com
DEEP SEA ELECTRONICS PLCHighfield HouseHunmanby Industrial EstateHunmanby, North YorkshireYO14 0PH England
TELEPHONE+44 (0)1723 890099
FACSIMILE+44 (0)1723 893303
WEBSITEwww.deepseaplc.com
Registered in England & Wales No.01319649 VAT No.316923457
DEEP SEA ELECTRONICS PLCTHAILANDTPI Tower, Lobby 3Floor 27, 26-56 Chan New RoadTungmahamek, SathomBangkok 10120, Thailand
TELEPHONE+66 (0) 2678 3028
FACSIMILE+66 (0) 2670 6228
WEBSITEwww.deepseaplc.com
DEEP SEA ELECTRONICS PLCmaintains a policy of continuous development and reserves the right tochange the details shown on this data sheet without prior notice. The contents are intended for guidance only.
055-045/05/07 (1)
This data sheet is printed on 9lives 55 Silk, which is produced with 55% recycled fibrefrom both pre and post-consumer sources, together with 45% virgin ECF fibre.
RELATEDMATERIALSTITLE PART NO’SDSE5210 & 5220 data sheet 055-037DSE5210 manual 053-023DSE5220 manual 057-016DSE5310 & 5320 data sheet 055-038DSE5320 manual 057-014DSE5310 manual 057-01352/53xx Software Manual 057-00655xx Software Manual 057-007
