Dsa 5500

7/28/2019 Dsa 5500

1/12

(732) 938-2000 / 800-LAB-VOLT, FAX: (732) 774-8573, E-MAIL: [email protected]

(418) 849-1000 / 800-LAB-VOLT, FAX: (418) 849-1666, E-MAIL: [email protected]: http://www.labvolt.com

A CNC LATHE SYSTEM

MODEL 5500Automation and Robotics

GENERAL DESCRIPTION

The CNC Lathe System, Model 5500, provides trainingin computer-aided design (CAD) and computer-aidedmanufacturing (CAM), using an industrial-grademicroprocessor-driven CNC lathe. The system allowsstudents to practice computer numerical controlled (CNC)code programming and editing, learn to operate lathecomponents, controls, and tools, set a programmedreference zero, follow the steps necessary to turn aspecified part, and apply the machine code language tocurrent lathe technology.

The CNC lathe consists of a horizontal lathe

constructed with a cast-iron bed, headstock, and tailstock.The lathe uses two ball screws, each driven by a steppermotor, to move the cross slide that carries the cutting toolalong the Z axis (right and left) and X axis (in and out)with maximum positional accuracy. The speed of eachstepper motor can be programmed separately for feedrates up to 762 mm/min (30 in/min). A 746-W (1.0-hp)motor rotates the spindle and 3-jaw chuck, and thus thestock, at speeds programmable up to 3400 r/min. Tofacilitate maintenance, the Z-axis ball screw is protectedby a telescoping helical dust cover.

The CNC lathe can machine pieces of soft materialssuch as plastic and wax, as well as harder materials suchas aluminum, mild steel, and brass. Pieces can be turnedinto a variety of cylindrical bumps, grooves, and hollows.The CNC lathe is capable of threading using anoptical-encoder feedback loop.

A computer(not included) is used to create NC partprograms with G and M machine codes or theirconversational code equivalents. The created programsare downloaded to the on-board microprocessor of theCNC lathe, which stores and executes them. Since the

CNC lathe connects directly to the serial or Ethernet portof a computer, or directly to a network, no additionalinterface card is required. The computer is free to be usedfor any additional applications since it is not dedicated tothe control of the lathe.

The CNC lathe is designed for use with the includedCNC Lathe Software, Model 5560. This Windows-basedsoftware permits creation of G and M code part programsfor download to the CNC lathe. It features CAD/CAMdesign and tool path emulation, which allow students tomake a drawing of a part, set up the tool paths and the

7/28/2019 Dsa 5500

2/12

CNC LATHE SYSTEMMODEL 5500

2

cut steps, and create a part program to simulate toolmotion on a monitor in order to verify NC code and thefinished part prior to the actual cutting. Canned cycles canbe programmed. The software can import NC partprograms created with other CAM programs that supportG and M codes. Students can also use the true

three-dimensional capabilities of the optional Lab-Voltindustrial-grade CAD/CAM Software, Model 5369, tocreate, examine, transform, and display CAD and CAMdesigns.

The CNC lathe features a control panel that permitsthe lathe to be operated manually. This panel includes amultiple-line LCD display, an easy-to-use membranekeypad, an error indicator/pause button, and a key-released emergency stop push-button. The latheparameters, including the spindle speed, the feed rate,the reference point, and the X and Z axes coordinates ofthe cutting tool, are adjusted by accessing differentmenus. During the turning, the control panel displays the

X and Z axes coordinates of the cutting tool, the feed rate,and the spindle speed.

The CNC lathe is designed for maximum safety. Asafety door provides protection during machining.Magnetic interlocks located on this door stop the spindleand the axes if the door is opened during machining. Limitswitches prevent the bed from over-traveling and thecutting tool from crashing into the chuck. Pressing theemergency stop push-button on the control panel cuts offthe power to the spindle motor and stops the axes.

The CNC lathe supports low-voltage communicationswith robotic units. For this purpose, the CNC lathefeatures a 15-pin TTL/IO port providing four 5-V digital

input and four 5-V digital output lines for TTLcommunication to an automation work cell. The CNClathe also features a 5-pin solenoid driver port providingconnections for up to four auxiliary devices. The TTL/IOand solenoid driver ports are M code supported throughthe CNC Lathe Software, Model 5560.

The CNC Lathe System comes with the accessories,software, and cable required for its operation. Theseinclude, a carbide insert cutting tool, two cutting tools(AR6 and E6 type), pieces of industrial machinableDelrin, a serial cable, a cross-over Ethernet cable, anda copy of the CNC Lathe Software, Model 5560.

Also included are two user guides. One user guidegives students experience with equipment designed toprepare them for the automated manufacturingenvironment. A user guide for the CNC Lathe Software,Model 5560, is also included, and providesdocumentation describing the features of the CNC LatheSoftware.

To enhance or expand the capabilities of the system,an assortment of machining tools and stock materials ofdifferent sizes are offered as options.

The CNC Lathe System can be bought with anAutomatic Tool Changer, Model 5514, capable of holding

up to 10 tools. The ATC allows students to execute partprograms without stopping the CNC lathe for tool changes(see description below).

Lathe Features

C On-board microprocessor

C Full manual control mode

C Feed rate override

C Spindle speed override

Safety Features

C Fully enclosed bed and work area

C Key-released emergency stop push-button

C Error indicator/pause button

C Switches monitored by the machine for:

safety door open

tool post too close to the chuck

over-travel protection on each axis

C Ability to restart programs from stopping point afteroperator abort or safety interruption has beencorrected.

TABLE OF CONTENTS

General Description . . . . . . . . . . . . . . . . . . . . . . . . . 1

CNC Lathe Software . . . . . . . . . . . . . . . . . . . . . . . . 3

Optional CAD/CAM Software . . . . . . . . . . . . . . . . . . 4

Table of Contents of the User Guides . . . . . . . . . . . 5

List of Equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Optional Equipment . . . . . . . . . . . . . . . . . . . . . . . . . 6

Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7Ordering Numbers . . . . . . . . . . . . . . . . . . . . . . . . . 10

7/28/2019 Dsa 5500

3/12

3

Control Panel Features

C Main power LED indicator

C 20-character by four-line LCD display

C 12-key membrane keypad

C Manual mode controls for:

X and Z axes coordinates units used (millimeters or inches)

feed rate

spindle speed

TTL I/O and solenoid outputs

C During execution, display of

X and Z axes coordinates

feed rate

spindle speed

current G and M codes

TTL I/O and solenoid output status

tool change

CNC LATHE SOFTWARE

This Windows-based 32-bit software runs underWindows 98/ME, NT 4.0/2000/XP and Vista. It featuresa parametric-based graphical tool editor, a 3D

(three-dimensional) Tool Path Emulator, and aneasy-to-use graphical interface. The software can importNC part programs created with other CAM programs thatsupport the G and M codes.

Features

C Provides G- and M-code programming

C Pull-down menus and icons

C Editor printout of part program

C Part program error checking using a syntax parser

C Fast syntax verification with line highlighting to speedpart program debugging

C Full 3D Tool Path Emulator including:

Path and Tool trace view

Radius or Diameter view

Part rotation and camera positioning for betteremulation viewing

Zoom in/zoom out capability

Interface with the tool table to provide an accuratetool simulation

Active display of X and Z axes coordinates

Display of current tool

Display of current G and M codes

Display of current feed rate and spindle speed

Simulation of current solenoid and I/O port activity

Real-time estimation of machining time Editor line highlighting while emulating part program

to track progress

C Parametric, graphical-view tool editor with support for20 tools

C Full G and M code help with graphical display andexample code

C Simple CAD-CAM graphical development of partprograms, including:

CAD editor to provide a simple yet powerful designfor ease of use

Standard turning cycles that can be graphically

created Integrated materials database that provides speed,

feed, and rough/finish cut settings

CAM export utilizing tool table and materials for partprogram parameters

C Serial and Ethernet download support for the Lab-VoltAutomation CNC lathes

7/28/2019 Dsa 5500

4/12


4

OPTIONAL CAD/CAM SOFTWARE

CAD/CAM Software

The CAD/CAM Software, Model 5369 is a fully integrated,industrial-grade software package that makes it easy toteach, learn, and use computer-aided design (CAD) and

computer-aided manufacturing (CAM) for both lathes andmills. The CAD/CAM Software features colorful, graphicalicons, and dialog boxes that make commands visual andintuitive. It has Drawing Interchange Format (DXF) andInitial Graphics Exchange Standard (IGES) translatorsthat make it possible to use geometric drawings createdwith other CAD programs. The software has powerfulediting tools for both CAD and CAM. As an integratedsoftware package, the CAD/CAM Software does notrequire students to switch back and forth between CADand CAM applications. Both are available from the samescreen menus.

CAD FunctionalityThe CAD functionality of the CAD/CAM Software allowsgeometric drawings to be created with both the freehandand spreadsheet (Geometry Expert) methods. With a fullset of geometry editing tools, two- and three-dimensionalparts can be created.

CAM Functionality

The CAM functionality of the CAD/CAM Software is an

easy-to-use, flexible, and powerful CAM programfeaturing editable tool and material libraries. Creating,redoing, and reordering tool paths are simplified with theuse of icons, dialog boxes, and simple drag-and-drop

capabilities. The CAM functionality includes powerful real-time renderings of tool paths, resulting in the machiningof very few defective parts. Post-edit programs areavailable for adaptation into machine code used by mosteducational and industrial CNC lathes. The CAMfunctionality lathe processes include roughing, finishing,and threading.

Features

C Commercial grade software

C Dynamic viewing of parts from any direction

C Part previewing

C English and metric units

C Multiple software platforms

C Estimated run times

C Object-oriented graphical interface

Automatic tool changer

The Automatic Tool Changer (ATC) is mounted on thelathe to enable students to use the equipment withoutstopping the machine to change tools. The ATC can holda total of 10 tools, five with a 9.53 mm (3/8 in) roundshank and five with a 9.53 mm (3/8 in) square shank.

The machine can be set to use all 10 tools in onecontinuous turning session. The rotary turret will placeeach tool accurately in its programmed position, withinan average time span of three seconds.

7/28/2019 Dsa 5500

5/12

5

TABLE OF CONTENTS OF THE USER GUIDES

Familiarization With the CNC Lathe, User Guide(36784-E0)

C Section 1 Installation

5500 CNC Lathe Specifications Requirements

Lathe Unpacking

Lathe Back Panel Connectors

Connecting the Lathe to the Computer

C Section 2 Operation

5500 CNC Lathe Functional Description

C Section 3 Tutorial Exercise

Introduction

Machine Preparation

Loading the Stock to be Turned Mounting of the Cutting Tools in Their Tool Holder

Mounting and Adjustment of the Tool Holders

Tool Offset Measurement

Setting the Programmed Reference Zero (PRZ)

Running the Lathe Functionality of the Lab-Volt CNCLathe/Mill Software

Opening Part Program Demo2

Setting the HOME Position

Setting the Lathe Tool Table

Verifying Communications Configuration

Downloading the Program

Turning the Part Precision of Cut

How Part Program Demo2 was Designed

Emergency Procedures

CNC Lathe Software, User Guide (36188-E0)

C Section 1 - Overview of the CNC Lathe Software

The Main Screen

The Toolbar

The Menu Bar

C Section 2 - Menus

The File Menu

The Edit Menu

The Search Menu

The Lathe Menu

The Options Menu

The Window menu

The Help menu

C Section 3 - The Part Program Editors

The Line Editor

The CADCAM Editor

The Block Editor

C Section 4 - Tutorial Exercices

Creating a simple G and M code part program

with the Line Editor

Emulating and downloading a G and M code partprogram

Creating, editing, and exporting a simple CADCAM

drawing with the CADCAM Editor Creating, editing, and exporting a simple block

part program with the Block Editor

7/28/2019 Dsa 5500

6/12


1 The ordering numbers shown apply to the English 120-V version. Other versions are available. Refer to the Ordering Numbers section.

2 The model numbers shown apply to the English 120-V version. Other versions are available. Refer to the Ordering Numbers section.

6

LIST OF EQUIPMENT

CNC Lathe System, Model5500-20

QTY DESCRIPTION ORDERING NUMBER1

1 CNC Lathe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5500-B02

1 Black/White Delrin Turning Stock Package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5304-00

1 CNC Lathe Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5560-00

1 CNC Lathe Software, User Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36188-E0

1 Familiarization with the CNC Lathe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36784-E0

CNC Lathe System, Model 5500-50

QTY DESCRIPTION ORDERING NUMBER

1 CNC Lathe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5500-B0

1 Black/White Delrin Turning Stock Package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5304-00

1 Automatic Tool Changer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5514-00

1 CNC Lathe Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5560-00

1 CNC Lathe Software, User Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36188-E0

1 Familiarization with the CNC Lathe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36784-E0

OPTIONAL EQUIPMENT

DESCRIPTION ORDERING NUMBER1

Black/White Delrin Turning Stock Package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5304-00

Black Delrin Turning Stock Package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5305-00

White Delrin Turning Stock Package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5306-00

Aluminum Turning Stock Package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5307-00

Brass Turning Stock Package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5308-00

Aluminum Turning Stock Package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5357-00

Four-Jaw Chuck . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5501-00

Standard Carbide Tool Set . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5504-00

Parting Tool Set . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5505-10

External Threading Tool . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5506-00

Indexable Boring Tool . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5507-00

Drill Chuck . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5510-00

Machining Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5512-10

Automatic Tool Changer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5514-00

CAD/CAM Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5369-00

CNC Lathe Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5560-00

Live Center . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96808-00

7/28/2019 Dsa 5500

7/12

7

SPECIFICATIONS

Model 5500-B CNC Lathe 120 V 60 Hz 220 V 50 Hz 240 V 50 Hz

Power Requirement Current 10 A 10 A 10 A

Lathe Swing over Bed 130 mm (5.1 in)

Center Height (from base pan) 142 mm (5.6 in)

Distance Between Centers 279 mm (11 in)

Swing over Cross Slide 48 mm (1.9 in)

Travel of Cross Slide 51 mm (2 in)

Repeatability 0.0127 mm (0.0005 in)

Resolution 0.0066 mm (0.00026 in)

Headstock Spindle Bore 15.8 mm (0.62 in)

Tailstock Tailstock Taper Morse no 1

Sleeve Stroke 34.8 mm (1.37 in)

Main Spindle Drive Programmable Speed Range 0-3400 r/min

Motor 746 W (1.0 hp), overload protected

Feed Motors Type stepper

Resolution 400 steps/r

Rapid Traverse Speed 762 mm (30 in/min)

Accessories included in Model 5500-B

Carbide Tool Set Types AR6 and E6

Carbide Insert Tool 55E right-hand insert

Tool Holders two for turning and facing operations

Tool Post Type quick-change

Null Modem Serial Cable Length 3.05 m (10 ft)

Connectors DB9 female/female

TTL/IO Cable Length 3.05 m (10 ft)

Connectors DB15 male/male

Ethernet Crossover Cable Length 2.13 m (7 ft)

Connectors RJ45 male/male

Three-jaw Chuck Type self-centering, two sets of jaws

Diameter 101.6 mm (4 in)

Hole Size 20 mm (0.7874 in)

Set of Tools Content hex keys, wrench, cleaning brush and tool bag and digital caliper

User Guide see the Table of Contents of the User Guides section

Physical Characteristics Dimensions (H x W x D) 330 x 914 x 597 mm (13 x 36 x 23.5 in)

Net Weight 77 kg (170 lb)

Model 5304 Black/White DelrinTurning Stock Package

Quantity 50 white and 50 black

Dimensions 19.1 mm (0.75 in) diameter, 76.2 mm (3 in) longModel 5305 Black DelrinTurning Stock Package

Quantity 100

Dimensions 19.1 mm (0.75 in) diameter, 76.2 mm (3 in) long

Model 5306 White DelrinTurning Stock Package

Quantity 100


7/28/2019 Dsa 5500

8/12


8

SPECIFICATIONS (cont'd)

Model 5307 Aluminum Turning Stock Package

Quantity 100


Model 5308 Brass Turning Stock Package

Quantity 25


Model 5357 Aluminum Turning Stock Package

Quantity 100

Dimensions 12.7 mm (0.5 in) diameter, 63.5 mm (2.5 in) long

Model 5501 Four-Jaw Chuck

Type each jaw is independent and reversible

Diameter 88.9 mm (3.5 in)

Model 5504 Standard Carbide Tool Set

Types AR6, BR6, D6, E6, C6, BL6 and AL6

Model 5505-10 Parting Tool Set

Tool Holder Type for 12.7 mm (0.5 in) high parting-off blade

Parting-off Blade Blade Height 12.7 mm (0.5 in)

Material HSS

Model 5506 External Threading Tool

Carbide Insert Hand right

Inscribed Circle (I.C.) 9.5 mm (0.375 in)

Tip Included Angle 60E

Pitch Range 16 - 48 TPI (0.5 -1.5 mm)

Tool Holder Insert Size for 9.5 mm (0.375 in) I.C. inserts

Helix Angle 1.5E

Model 5507 Indexable Boring Tool

Carbide Insert Cutting Edges 3

Type TPEE-730 boring insert

Boring Bar Type fits TPEE-730 insert

Model 5510 Drill Chuck

Chuck Capacity 0 to 9.5 mm (0 to 0.375 in)

Type fits Jacob No. 2 arbor

Arbor Chuck Taper Morse No. 1

Model 5512-10 Machining Kit

Four-jaw Chuck see Model 5501 for the details

Live Center see Model 96808 for the details

Carbide Tools Types AR6, BR6, BR7, D6, E6, C6, BL6, AL6

Morse no. 1 Taper-shank Drill Tools Diameters1.59 mm (0.0625 in), 3.18 mm (0.125 in), 4.76 mm (0.1875 in), 6.35mm (0.25 in), 7.94 mm (0.3125 in), 9.53 mm (0.375 in), 11.11 mm(0.4375 in) and 12.7 mm (0.5 in)

Parting Tool Set see Model 5505-10 for the details

Center Drill Body Diameter 6.35 mm (0.25 in)

Drill Diameter 2.78 mm (0.109375 in)

Size No. 3

Indexable Boring Tool see Model 5507 for the details

Drill Chuck see Model 5510 for the details

7/28/2019 Dsa 5500

9/12

SPECIFICATIONS (cont'd)

9

Model 5514 Automatic Tool Changer

Rotary Turret Number of Tool Positions 10

Position Details - 5 for external turning tools, 9.5 mm (0.375 in) square shank,alternately spaced

- 5 for drilling, boring, and internal threading tools, 9.5 mm (0.375 in)dia. round shank, alternately spaced

Tool-to-Tool Indexing Time 3 sec.

Maximum Tool Protrusion - square-shank: 19.05 mm (0.750 in)

- round-shank: 101.6 mm (4 in)

Turret Diameter 127 mm (5 in)

Turret Thickness 25.4 mm (1 in)

Repeatability Position 0.0064 mm / 0.00025 in ( 0.007E)

Tool-to-Tool 0.051 mm / 0.002 in ( 0.056E)

Model 5369 CAD/CAM Software

License Number of Users 1

Computer Requirements (minimum) Type 233 Mhz Intel (Pentium or Celeron) or AMD (Athlon or Duron)

Operating System Windows 2000 with SP4, Windows XP or Windows 2003 ServerR1 or later or Windows Vista

RAM 128 MB

Graphic Card 3D

Model 5560 CNC Lathe Software

Licenses Number of Users 1, 5, 10, 15, 20, 25, 30 or 35

Computer Requirements (minimum) Type Pentium II, 400 MHz

Operating system Windows 98/ME, NT 4.0/2000 or Vista

RAM 32 MB

Graphic Card 3D

Model 96808 Live Center

Taper Morse No. 1

7/28/2019 Dsa 5500

10/12


1 TBE = To be established

2 N/A = Not available at the time of printing

10

ORDERING NUMBERS

120 V 60 Hz 220 V 50 Hz 240 V 50 Hz

ENGLISH FRENCH SPANISH ENGLISH FRENCH SPANISH ENGLISH

5500-20 TBE1 5500-22 5500-25 TBE 5500-27 5500-2A5500-50 TBE TBE 5500-55 TBE TBE 5500-5A

5500-B0 TBE 5500-B2 5500-B5 TBE 5500-B7 5500-BA5304-00 5304-00 5304-00 5304-00 5304-00 5304-00 5304-005305-00 5305-00 5305-00 5305-00 5305-00 5305-00 5305-005306-00 5306-00 5306-00 5306-00 5306-00 5306-00 5306-005307-00 5307-00 5307-00 5307-00 5307-00 5307-00 5307-005308-00 5308-00 5308-00 5308-00 5308-00 5308-00 5308-005357-00 5357-00 5357-00 5357-00 5357-00 5357-00 5357-005501-00 5501-00 5501-00 5501-00 5501-00 5501-00 5501-005504-00 5504-00 5504-00 5504-00 5504-00 5504-00 5504-005505-10 5505-10 5505-10 5505-10 5505-10 5505-10 5505-105506-00 5506-00 5506-00 5506-00 5506-00 5506-00 5506-005507-00 5507-00 5507-00 5507-00 5507-00 5507-00 5507-005510-00 5510-00 5510-00 5510-00 5510-00 5510-00 5510-00

5512-10 5512-10 5512-10 5512-10 5512-10 5512-10 5512-105514-00 TBE TBE 5514-00 TBE TBE 5514-00

96808-00 96808-00 96808-00 96808-00 96808-00 96808-00 96808-0036188-E0 TBE 36188-E2 36188-E0 TBE 36188-E2 36188-E0

36784-E0 TBE 36784-E2 36784-E0 TBE 36784-E2 36784-E0

Table 1. Equipment Ordering Numbers (Domestic and International Markets)

NUMBEROF USERS

120 V 60 Hz 220 V 50 Hz 240 V 50 Hz

ENGLISH FRENCH SPANISH ENGLISH FRENCH SPANISH ENGLISH

1 5369-00 N/A2 5369-02 5369-00 N/A 5369-02 5369-001 5560-00 TBE 5560-02 5560-00 TBE 5660-02 5560-005 5560-A0 TBE 5560-A2 5560-A0 TBE 5560-A2 5560-A0

10 5560-B0 TBE 5560-B2 5560-B0 TBE 5560-B2 5560-B015 5560-C0 TBE 5560-C2 5560-C0 TBE 5560-C2 5560-C020 5560-D0 TBE 5560-D2 5560-D0 TBE 5560-D2 5560-D0

25 5560-E0 TBE 5560-E2 5560-E0 TBE 5560-E2 5560-E030 5560-F0 TBE 5560-F2 5560-F0 TBE 5560-F2 5560-F035 5560-G0 TBE 5560-G2 5560-G0 TBE 5560-G2 5560-G0

Table 2. Software Ordering Numbers

7/28/2019 Dsa 5500

11/12

7/28/2019 Dsa 5500

12/12

Reflecting Lab-Volt's commitment to high quality standards in product, design, development, production, installation, and service, our manufacturing and distributionfacility has received the ISO 9001 certification.

Lab-Volt reserves the right to make product improvements at any time and without notice and is not responsible for typographical errors. Lab-Volt recognizes all productnames used herein as trademarks or registered trademarks of their respective holders. Lab-Volt 2008. All rights reserved.

TA94009-00 Rev. F

Dsa 5500

Documents

Transcript of Dsa 5500