PRINTED IN CHINA CONDOR LIGHTING - The Basic Source – TBS Portal
Download — 16.2MB - Eagle Lighting Home
Transcript of Download — 16.2MB - Eagle Lighting Home
OUR PRODUCT | EAGLE LIGHTING AUSTRALIA
Now INTERAcTIvE
www.eaglelighting.com.au 2
COnTenTs
meDiCalaRTiCles
ReCesseD
Aureled range 22 - 26
Linjar 27
vertex 28
vertex Air 29
Hyperion Ag 30
Indigo combo 31
Multifive G2 32
Multifive Air G2 33
Penta G2 34
Pentair G2 35
Enviro 36
Enviro Diffused 37
visionline 38
Flexitroffer 39
XT5 Troffer 40
Accessories - Troffers 41
cleanroom IP44 LED 45
cleanroom IP44 cyanosis LED 46
cleanroom IP44 LED High output 47
cleanroom IP44 T5 48
cleanroom IP44 T8 49
cleanroom IP54 50
cleanroom cLB IP54 51
Secureroom IP65 52
Secureroom SLB IP65 53
operating Theatre Light 55
Gondol 56
Florence Elite 57
Indigo Hygiene 58
Enviro Hygiene 59
Enviro Diffused Hygiene 60
Aureled vista 61
www.eaglelighting.com.au 3
Specular 85
Accessories - Downlights 86
Accessories - Anti-ligature Kit 87
Accessories - LED Retrofit Kit 88
sUsPenDeD sysTem
emeRgenCy
DOwnlighTs
Uno Beta Direct 65
Uno Beta Direct/Indirect 66
Uno Diffused Direct 67
Uno Diffused Direct/Indirect 68
Uno continuous Direct 69
Uno continuous Direct/Indirect 70
Accessories - Uno 71
emLED Micro 75
iTrack emLED 76
orion 79
orion Phantom 80
orion Tilt 81
IP65 Rated Downlight 82
Facetted 83
Satin 84
wall lighTs
Luna 92
Bells T5 93
Bladerunner 94
Ceiling lighTs
Aerial LED 97
Aerial T5 98
Batten Angleskirt 99
Batten Slimline 100
Batten wire Guard 101
Batten Diffused 102
Pelmet 103
www.eaglelighting.com.au 4
Quantum 124
Pantheon 125
Rondo G2 wall 126
Rondo G2 Recessed 127
IP65 Rated Tamperproof 128
seCURiTy Range
Tuscan Surface Mounted 107
Tuscan 60/30 Angle 108
Tuscan 45 Angle 109
Parkalux 110
Flair 111
Tampa T5 112
Tampa Downlight 113
Discovery Space 114
Buccaneer 115
Densus LED 116
Densus G2 117
Nite cell Lamp 118
Uni-cell 119
vanguard 120
Monitor 121
Quadriga 122
Quadrant 123
PROjeCTs
TeChniCal infORmaTiOn
www.eaglelighting.com.au 5
< contents
Sometimes changes are not always welcome, however this catalogue represents our transformation from a small localised luminaire manufacturer into a significant part of a global operation.
Over the last twelve months, the staff of Eagle Lighting Australia have worked tirelessly on implementing a number of key milestones in our development. From the growth of our Engineering department, to the establishment of our company Mission, Vision and Value statements. From our Design & Marketing team who have created this catalogue and developed our brand image, to the overall efforts of all our employees who ensure the user experience of ELA is as good as it can be.
It is an exciting time to be leading Eagle Lighting Australia forward, one of our key building blocks is the continual development of our luminaire range, and this catalogue is a reflection of some of the innovation and evolution of our product. New luminaires within this document include the Uno System, Enviro Diffused and Cleanroom CLB options.
We have also showcased noteworthy projects across Australia where our luminaires have been best utilised, and for your convenience have added a technical section and index.
Eagle Lighting Australia is committed to offering our customers not just lighting, but a lighting solution.
alan jones
Managing Director
FoREwoRD
www.eaglelighting.com.au 6
< contents
In order for an organisation to move forward individually and collectively, one must acknowledge and respect its past.
From establishment in 1972 as a small, Melbourne-based manufacturer of fluorescent lighting, Eagle Lighting Australia has evolved into an international company that manufactures, imports/exports and distributes premium quality luminaires throughout Australasia.
In nearly forty years of existence, ELA has represented many of the finest luminaire brands. The biggest change in our business was the acquisition in 2007 of ELA by the Fagerhult Group who are the largest lighting company in the Nordic region and third largest in the European market. Significantly this change brought unprecedented access to an international network of suppliers, products and knowledge. These resources have been advantageous to ourselves and our customers in Australia and New Zealand.
In 2009, ELA moved its administration, production and distribution into a purpose built facility at Melbourne Airport. Through careful planning, the move into a fully customised facility has opened up key business opportunities for us. We are able to showcase luminaires in a real
environment, specifically a working office demonstrating the effect lighting has on staff and their environment.
To ensure we create light fittings with maximum efficiency, we have established a world-class manufacturing facility with state-of-the-art machinery. Today, these facilities have grown to be the cornerstone of our business, allowing us to manufactures, import and distribute orders throughout Australasia. We’re so proud of what we’ve achieved, that in recent times we’ve opened the doors and invited industry to experience our facilities.
Currently, Eagle Lighting employs over 100 staff in Australia, nearly doubling in size over the last four years. We have key partnerships in the remaining states of Australia, and in the past year expanded our operation into South Australia and to New Zealand under the Fagerhult brand.
Our growth has been nothing short of staggering, yet we’re not content to rest on our laurels. With the combined abilities of our richly diverse and knowledgeable staff, Eagle Lighting Australia will continue to provide innovative and affordable lighting solutions to the marketplace deep into the 21st century.
OUR sTORy
www.eaglelighting.com.au 7
< contents
OUR PeOPle, OUR PRODUCT, OUR PlaneT
Our mission is to go beyond the expectations of our customers through the continued development of Our People, the innovation and evolution of Our Product and the ongoing care and protection of Our Planet.
In this day and age, the importance of knowing who you are and what you stand for has become more relevant than ever.In 2010, Eagle Lighting Australia set about establishing the ideals which the company and employees hold most dear. Our Mission, Vision and Value statement and the mantra ‘Our People, Our Product, Our Planet’ is the embodiment of our vision to be recognised as Australasia’s premier lighting solutions provider.
OUR PeOPle
We value Our People and acknowledge their importance in our continued success.
We demonstrate our value for Our People: + Communication and teamwork + Education, training and development + Health and safety + Fairness and flexibility + Reward and recognition
OUR PRODUCT
We are committed to offering lighting solutions that go beyond the expectations of our customers.
We demonstrate our value for Our Product through: + Customer service + Creativity and innovation + Development
OUR PlaneT
We place value in protecting the environment and making a positive contribution to our community.
We demonstrate our value for Our Planet through: + Customer collaboration + Respect for the environment + Community causes
www.eaglelighting.com.au 8
< contents
The story of Fagerhult begins in a small Swedish town of the same name, in the Christmas of 1943. Bertil Svensson, then 23-years-old, was working as an electrician when he came up with an idea for a present. Bertil saw that his mother, who was busy helping others during the day, needed a way to relax during the evening, but with little light due to scarcity of electricity in many houses of the time, Bertil saw a problem that required a solution. Over the following months he brought the pieces together to form his project, a question mark shaped lamp that would shine light directly over his mother’s head so she could read and do her needlework. When he saw her reaction as he revealed his present, he made a decision that day to create lamps to respond to people’s needs. He would create light.
With little money, and little business knowledge, Bertil enlisted the help of two friends, Helmer Anderson and Harold Ulfenborg to start a company –
Fagerhult. By 1945, the company was officially established, had quadrupled sales by the end of their second year, and had built the first of forty buildings that still stands at the Fagerhult factory today.
It wasn’t until 1949 that Bertil truly established the direction of this company. He saw the future of Fagerhult not just in creating lamps, but in creating crisp, bright lighting for public spaces. He was drawn by the challenge and complexity and the need for innovation. He saw the need for people to have perfect clarity in their workspace and he did this with the mantra ‘the more we know, the more we can achieve’.
As Fagerhult turned their focus into providing light solutions for complicated environments like schools, hospitals, apartments and offices, they began the process of arming themselves with knowledge. They gathered information and created in-house studies of light. They set up an ‘experiment department’
BERTIL SvENSSoN - THE FOUNDER OF FAGERHULT WITH HIS CREATION
where they explored new materials and techniques, they developed new machinery and created new technology, thus setting the direction of the company.
What was once a small village, became a bustling town as the factory grew and employed more staff. Bertil had a full-time building crew, who when they weren’t busy at Fagerhult, were constructing housing and facilities for his employees and townspeople. Knowledge is at the heart of Fagerhult. The insight into the spoken and unspoken needs of customers drives product development.
wITH A ‘cAN Do’ ATTITUDE, THE oNGoING AMBITIoN oF FAGERHULT IS To coNTINUE SoLvING NEw cHALLENGES wHILE BAcKING ITS ABILITy To AcHIEvE wHAT MoST DEEM IMPoSSIBLE.
The fageRhUlT sTORy
www.eaglelighting.com.au 9
< contents
Fagerhult is one of Europe’s leading lighting groups, with approximately 2200 employees and operations in 17 countries. They create modern products and energy-efficient, environmentally-friendly lighting. The Group includes strong brands such as Fagerhult, LTS, Atelje Lyktan, Whitecroft, Designplan and of course, Eagle Lighting Australia. AB Fagerhult is listed on the NASDAQ OMX Nordic Exchange in Stockholm.
Fagerhult’s business concept is to develop, manufacture, and market lighting systems for public environments. With value placed in customer focus, a culture of performance and an innovative mind set, the vision is to create energy-efficient lighting solutions contributing to an ergonomically sound environment in an international arena.
FAGERHULT FAcTS
PRODUCT AREAS INDOOR, OUTDOOR AND RETAIL LIGHTING
GEOGRAPHICAL BUSINESS AREAS NORTHERN EUROPE Nordic & Baltic countriesOTHER EUROPE Germany, Spain, France, Holland, Poland & AustriaUK/IRELAND/MIDDLE EASTASIA & AUSTRALIA
PRODUCTION FACILITIES HABO & AHUS Sweden
MANCHESTER & SUTTON England
TETTNANG Germany
SUZHOU China
MELBOURNE Australia
The fageRhUlT gROUP
www.eaglelighting.com.au 10
< contents
One of the most exciting areas of development has been the growth in our Engineering department. This team is the backbone of our commitment to providing the right lighting solutions for our customers and our dedication to ongoing development.
The thought behind ‘from concept to completion’ is about being able to follow an idea through a design process and see it come to fruition. Through our in-house Engineering team, and world-class manufacturing plant, we now have that ability.
Using the latest 3D design software Solidworks, ideas are brought to life as a working concept. Parts such as electrical ballasts, componentry, lamps and gear trays are simulated in a digital environment, long before the first piece of steel is punched and formed by one of our NC Turret machines. The advantage of using 3D computer aided design (CAD) is the efficient review of designs prior to manufacture rather than after.
Also, by simulating fittings in different installation environments, we can make informed decisions on what works and what doesn’t. Of course, once a new fitting is approved we can easily and efficiently create shopfloor drawings, bill-of-materials (BOM), datasheets and production processes.
Our design components are translated into NC Fabriwinn software, where they are programmed then sent to the factory for punching and forming. They are then folded and go through one of three Brake Presses as per the supplied shopfloor drawings.
After folding, a new fitting will be cleaned and put through our state-of-the-art paint line. It is assembled and wired, electrically tested, packaged and dispatched to the customer. The attention to detail in the formative stages will heavily influence the lighting solutions our Engineering team is able to provide.
engineeRing Design anD DevelOPmenT
www.eaglelighting.com.au 11
< contents
SOLUTION DRIVEN DESIGNS
You should consider the products within this catalogue as our ‘stock’ items. However one of the strengths of Eagle Lighting is the ability to create ‘Solution Driven’ designs. We pride ourselves on being adaptable, creative and innovative, we believe this to be one of our core strengths.
Examples of some solution-driven designs include – an existing wallwasher luminaire, adapted to include a removable wipe-down diffuser. The hospital required it to be installed into an existing suspended ceiling. We were also approached to create a secure bed-light for a prison which had to be installed in a precast concrete wall. The solution lay in the creation of a special sleeve that remained in place during the concrete pour, and allowed us to secure the fitting at a later date.
It is advantageous to be recognised for being flexible, yet there is also the potential for any of our customisations to become a standard fitting in the future which in turn is to the benefit of any future potential customers.
MARKET DRIVEN DESIGNS
As part of our product development process we are constantly analysing the lighting market to identify gaps. Our aim is to be proactive and to be seen as the leader for others to follow.
The perfect example of this is the brand new UNO luminaire. This modular fitting with an aluminium extruded body, is available in both single, and continuous option of any overall length as required. The development of this fitting came about as a resolution to a practical need. Our Engineering team set about designing a new luminaire with similar light output specifications as the existing fitting, but to be much more user friendly during installation.
www.eaglelighting.com.au 12
< contents
maDe in aUsTRalia
Through the relationship between Fagerhult and ELA, there is a commitment to ongoing manufacturing investment at our Melbourne facility.
We believe the concept of ‘Made in Australia’ is a principal upon which ELA can build for it’s long-term success. To communicate this, we have been holding factory tours for members of the wider lighting industry to showcase our investment, not just in manufacturing but in engineering and product development also.
One of the strategies behind our heavy investment in our factory and operations in Melbourne is to marry our machines and capabilities to those of the other members within the global Fagerhult Group. The goal being to produce a global range locally.
The investment in ELA, is also an investment in the Australian economy. Through the Global Financial Crisis we are proud to have experienced a period of growth both in employee numbers and sales. We are now able to take a global product and if needs be, develop solutions specific to the diverse Australian market and its customers. One of our major priority is our on-time delivery performance. We can react to changes in the local market whether it be a technological advance, a market surge towards a particular product, or a reaction to the changing Australian climate, with much greater efficiency.
AT oUR FAcILITy, wE Now HAvE A SEAMLESS AND EFFIcIENT PRoDUcTIoN LINE FRoM MANUFAcTURE, To ASSEMBLy To DISTRIBUTIoN.
The ability to manage the whole process allows for better quality control, better customisation, better production times, all of which provide better customer satisfaction backed by the assurance of local support.
www.eaglelighting.com.au 13
< contents
Our move to the new Manufacturing facility at Melbourne Airport, gave us the opportunity to invest in a world class, environmentally friendly paintline.
This closed-circuit, state-of-the-art paintline incorporating ITW GEMA technologies, was selected specifically after consultation between Fagerhult, several suppliers and ourselves. It was important that whatever option we chose, it was in-line with Fagerhult recommendations and also had similar painting capacities that exist at other facilities within the group. Manufacturing Globalisation practices ensure we have the ability to produce a luminaire in Australia, to identical specifications as one produced in a factory in Sweden, China, Germany or England.
Some of the important features of this paintline are as follows:
+ An environmentally friendly, closed system powdercoating operation that exceeds all relevant Australian standards.
+ A seamless and fully automated powdercoating process, where raw luminaire components are degreased and treated, dried, coated and baked before being prepared for assembly.
+ Incorporated into the water-based, degreasing cycle is an eco-seal application. Through a three-stage procedure, two parts of eco-seal are combined to give all of our luminaires an additional rust-inhibiting seal.
+ Eco-sealing is essential as we are rustproofing the entire luminaire including all its raw edges. We see this as value-added benefit to the end-user when you begin to compare the quality of our fittings and pricing with competitors.
POwDeRCOaT PlanT
www.eaglelighting.com.au 14
< contents
As a member of the Fagerhult Group, we now have unveted access to global support, resources and knowledge in all aspects of the lighting industry. The single, biggest benefit of being part of this global network is in manufacturing support.
From a product-only point of view, global support provides advances in technology, manufacturing and higher quality of parts and materials developed in facilities across the planet, equally we can share our products and ideas within the group.
Through the investment here in Australia, we can now produce a fitting to the exact specifications as one produced in Sweden, China, Germany or England.
We also benefit from operational support, this includes adopting logistics and sales software, and access to literature and marketing materials. We often access the knowledge acquired by the Fagerhult Lighting Academy a division of the Fagerhult Group established in 2004. The Academy’s foremost task is to gather, refine and distribute knowledge from and to the Fagerhult Group through e-learning, seminars, conferences and courses.
The Fagerhult family is growing either through acquisition or by partnering in key growth areas, and we’re excited to be part of the growth, but also to pass on the benefits to our customers.
FAGERHULT FAcToRy. HABO, SWEDEN
SUZHoU, CHINATETTNANG, GERMANY
MANcHESTER, ENGLANDAHUS, SWEDEN
glObal sUPPORT
www.eaglelighting.com.au 15
< contents
OUR LABORATORY
Our laboratory, Technical Centre, has had an SMTA-agreement with Intertek ETL Semko since 1993. The agreement means that Intertek ETL Semko has inspected and approved our test equipment and quality system as well as the expertise of our personnel.
The Technical Centre is also very well equipped with instruments to perform other tests on luminaires. Instruments of the highest quality and accuracy are in place to inspect the product’s EMC-properties (after IEC/EN 55015 which is a recognised standard in Australia, ACMA is the regulating authority), to verify lighting performance and other quality tests.
Other tests include products to EN 60598. EN 60598 (IEC 60598) similar to products tested to AS/NZS 60598 for both Australia and New Zealand, differences are mainly related to voltage, flammability and type of flex and plug used.
The Technical Centre also participate in standardisation work within the field of luminaires via our membership of the Swedish Electrical Commission team TK34. This team discusses proposals for amendments to testing standards. Consequently, we have the possibility to influence new standards as well as keeping ourselves well informed about future amendments.
In addition to annual audits, Intertek ETL Semko also has the right to visit our laboratory at any time or call in products for comparison tests.
THIRD PARTY CERTIFICATION – FOR YOUR SAFETY
Fagerhult has chosen, despite third party certification no longer being required, to continue with this procedure for its basic range. This is to ensure that the customer receives products that conform to all current safety requirements and where the product is inspected by an independent body. Variants of the basic range, for example, products with HF-dim or with emergency light functionality, are not usually certified by a third party. However, the safety levels on these designs are just as high as for other products.
Other in house tests to the appropriate International standards include IP ratings, IK ratings and thermal testing.
NATA
Additional NATA accredited testing is performed on selected products in Australia to ensure compliance and Australian and New Zealand standards and to guarantee stated performance values. Tests include AS/NZS 60598, thermal and photometric performance and IP ratings.
lab & PRODUCT TesTing
www.eaglelighting.com.au 16
< contents
Whereas once a Lighting Design was as simple as measuring the height of a wall, the width of a room and making some calculations. Today, the lighting designer must consider what the vision of the architect, engineer or client is.
Have you ever walked into a room and wondered, “How would this room look bathed in light?” Or gazed at a feature wall, and queried if some simple up lighting might enhance that space. In conjunction with our Sales Team, the Designers at Eagle Lighting Australia can replicate any space using the latest CAD software (AGi32, Dialux and 3D Studio Max) but also calculate and generate 3D Computer Generated Images (CGI). These reflect how any space might look, complete with a representation of the luminaires, along with all the photometric data specific to the design.
The benefit to the builder, specifier or end user is that decisions can be made earlier in the planning of any project, avoiding costly mistakes once construction has started. The smallest adjustment or detail can be altered, a new visualisation can be created, a new calculation can be made, and the end result will therefore be more cost effective but also more dynamic.
THE DESIGN TEAM AT EAGLE LIGHTING AUSTRALIA IS coMMITTED To ENSURING THE DREAMS AND vISIoNS oF oUR cLIENTS ARE MET.
Their aim is to design with accuracy, consistency and flair, all whilst meeting demanding deadlines and working to Australian Lighting standards (AS1680/AS1158/AS2560/etc) turning visions into a stunning reality.
CReaTive lighTing sOlUTiOns
www.eaglelighting.com.au 17
< contents
www.eaglelighting.com.au 18
< contents
ORganiC ResPOnse lighTing COnTROls
HOW ORGANIC RESPONSE® WORKS
At the heart of Distributed Intelligence is the Sensor Node, which is integrated into each luminaire during manufacture to create an Organic Response Enabled® luminaire. Each Sensor Node contains a motion sensor, infrared transmitter, infrared receiver and ambient light meter.
The Sensor Nodes communicate with each other as follows:
Organic Response® has developed a Distributed Intelligence lighting control system that allows each individual luminaire to make lighting decisions based on the presence of occupants in its immediate vicinity, ambient light levels, and information it receives from its neighbouring luminaires. It then contributes information back to the luminaire community, so other luminaires can also make more informed lighting decisions. Although they make decisions individually, Distributed Intelligence means all the lights in a defined space act as a coordinated community.
1. The moment a Sensor Node detects occupancy, the luminaire responds by outputting a predetermined light level. It simultaneously communicates with its immediate neighbour luminaires using a Level 1 proximity limited wireless infrared, telling them it can see someone.
2. On receipt of this level 1 signal the neighbouring Sensor Nodes know that there is someone within one light fitting of them, and respond by outputting a predetermined light level appropriate to that occupancy profile (e.g. 80% brightness). They simultaneously relay a Level 2 signal to their own neighbours, notifying them of the occupant’s relative proximity.
3. This propagates throughout the floor, creating the Occupancy Information CloudTM. Each Sensor Node receives signals indicating how close someone is to it, and responds by emitting the appropriate light level based on the rich occupancy information it continually receives (and disseminates). The Occupancy Information CloudTM is illustrated over the page.
www.eaglelighting.com.au 19
< contents
THE OCCUPANCY INFORMATION CLOUD
When Sensor Nodes are integrated into a typical lighting array, the density and position of luminaires is such that there is complete coverage of a given floor space, thus creating an Occupancy Information CloudTM with complete building coverage.
By utilizing information contained in the Occupancy Information CloudTM, devices can make intelligent decisions locally, in response to their surroundings. Furthermore third party systems, for example Building Management Systems (BMS), can interface with the Occupancy Information CloudTM via an Interface Node allowing building-wide systems to more intelligently interact with human occupants.
Organic Response® technology has the ability to revolutionise the way lights, and subsequently buildings, are controlled globally. Our aim is to establish the Occupancy Information CloudTM as a global standard in collecting and disseminating location-specific, realtime occupancy information. Once established, the Occupancy Information CloudTM will provide an occupancy information service that has yet-to-be-imagined potential to be utilised by a variety of third party systems to enhance their own services (e.g. heating, ventilation and air conditioning, blinds, etc) and significantly improve energy efficiency and occupancy comfort.
www.eaglelighting.com.au 21
< contents
RECESSED
www.eaglelighting.com.au 22
< contents
Encompassing a range of new technology and innovative design features, Aureled is an outstanding solution that delivers an impressive system efficacy of up to 112lm/w whilst maintaining excellent glare control for office environments.
The “Conical De-Glaring Prism” (CDP) and masking agent eliminate distracting LED micro points and controls the light in the 65˚ plane to within 3000cd/m2. Controlling glare with these intense light sources is becoming more and more critical in our objective to better harmonize light with human activity.
Designed and constructed with a shallow 48mm profile the Aureled will slide into confined spaces. Coupled with a detachable gearbox incorporating a plug-and-play connector this luminaire is the perfect solution for locations where other services are likely to be fouled.
Once installed, the gearbox can be detached from the luminaire housing as required whether for upgrading to dimming or maintenance.
Aureled takes LED technology and turns it into a truly viable solution for full general lighting, capable of replacing luminaires using older T5 technology.
Options: » Organic Response Enabled integral » Surface/plaster » CRI > 90 » Seismic Restraint
All system lumen output measurements are calculated using LEDs with a 4000k colour temperature.
Wiring options Suffix
Standard 000
DSI/STD terminal block 100
DALI/STD terminal block 200
Standard/Fused terminal block 400
DSI/Fused terminal block 500
DALI/Fused terminal block 600
Maintained emergency 800
DALI monitored emergency 801
Technical specifications
Total luminaire efficacy 112lm/W
MacAdam 3 SDCM
CRI > 83
Luminaire lifetime L80/F10/50,000h
LLMF L92/30,000h L90/37,000h
Greenstar: 2.4m x 2.4m = 1.07W/m2/100 lux
3.0m x 3.0m = 1.07W/m2/100 lux
Performance Summary
Spacing
2.4m x 2.4m - 20.7w = 335.86 lux
3.0m x 3.0m - 34.3w = 359.03 lux
Design parameters
Maintenance 0.8
Reflectance 70/50/20
Ceiling height 2.7m
Working plane 0.72m
Based on an open plan of 16.8m x 16.8m/21m x 21m
Fitting A B C D WeightETB 300 x 300 300 300 48 43 1.6ETB 300 x 600 300 600 48 43 3.4ETB 300 x 1200 300 1200 48 43 6.4ETB 600 x 600 600 600 48 43 6.4ETB 300 x 1500 300 1500 48 43 7.6
D
E
F
C
1 2
B
A
321 5
C
D
4 6 7 8
A
B
E
REVISION DESCRIPTION BY DATE CH'D BY DATELOCATION
A --- Initial Design
DO NOT SCALE - IF IN DOUBT, ASK
frank.m
Peter.Prodromos
14/06/2012EL-AUR-414-800-000
Scale:
Checked By: Sheet: A3Sheet Size:
Note: Unless specified otherwise, all dimensions
are in millimeters
eagle lighting australia 'Member of Fagerhult Group'
17-19 Jets Court, Melbourne Airport VIC 3045 t. 03 9344 7444 f. 03 9344 7433
www.eaglelighting.com.au
Assem Code/Drw No:
Drawn By:
1 of 1
Assem Name:
Rev.
43
D
E
F
C
1 2
B
A
321 5
C
D
4 6 7 8
A
B
E
REVISION DESCRIPTION BY DATE CH'D BY DATELOCATION
A --- Initial Design
DO NOT SCALE - IF IN DOUBT, ASK
frank.m
Peter.Prodromos
14/06/2012EL-AUR-414-800-000
Scale:
Checked By: Sheet: A3Sheet Size:
Note: Unless specified otherwise, all dimensions
are in millimeters
eagle lighting australia 'Member of Fagerhult Group'
17-19 Jets Court, Melbourne Airport VIC 3045 t. 03 9344 7444 f. 03 9344 7433
www.eaglelighting.com.au
Assem Code/Drw No:
Drawn By:
1 of 1
Assem Name:
Rev.
43
A
C
B
D
Nominal dimensions (mm)
LED IP44Wattage Size System lm lm/W Colour temp Code Suffix
Exposed T-Bar
13.3w 300 x 300 1730 91 4000k EL-AUR-1103-
11.8w 300 x 600 1750 108 4000k EL-AUR-1110-
13.6w 300 x 600 2000 107 4000k EL-AUR-1113-
23.8w 300 x 1200 3500 108 4000k EL-AUR-1171-
27.3w 300 x 1200 4000 108 4000k EL-AUR-1174-
20.7w 600 x 600 3000 112 4000k EL-AUR-1155-
34.3w 600 x 600 5000 110 4000k EL-AUR-1158-
13.3w 300 x 300 1670 88 3000k EL-AUR-1102-
11.8w 300 x 600 1700 105 3000k EL-AUR-1109-
13.6w 300 x 600 1940 104 3000k EL-AUR-1193-
23.8w 300 x 1200 3400 105 3000k EL-AUR-1170-
27.3w 300 x 1200 3880 104 3000k EL-AUR-1173-
20.7w 600 x 600 2900 108 3000k EL-AUR-1154-
34.3w 600 x 600 4840 106 3000k EL-AUR-1157-
29.5w 300 x 1500 4235 106 3000k EL-AUR-1189-
34w 300 x 1500 4840 105 3000k EL-AUR-1190-
AURELED
www.eaglelighting.com.au 23
< contents
Encompassing a range of new technology and innovative design features, Aureled Dropped is characterised by a level surface but is dropped from the ceiling, giving exciting effects and a pleasant ambient light.
It delivers an impressive system efficacy of up to 124lm/w whilst maintaining excellent glare control for office environments.
The Aureled Dropped will slide into confined spaces. Coupled with a detachable gearbox incorporating a plug-and-play connector this luminaire is the perfect solution for locations where other services are likely to be fouled.
Once installed, the gearbox can be detached from the luminaire housing as required whether for upgrading to dimming or maintenance.
Aureled Dropped takes LED technology and turns it into a truly viable solution for full general lighting, capable of replacing luminaires using older T5 technology.
Options: » Organic Response Enabled integral » Surface/plaster » CRI > 90 » Seismic Restraint
All system lumen output measurements are calculated using LEDs with a 4000k colour temperature.
Performance Summary
Spacing
2.4m x 2.4m - 20.7w = 346.94 lux
3.0m x 3.0m - 34.3w = 394.62 lux
Design parameters
Maintenance 0.8
Reflectance 70/50/20
Ceiling height 2.7m
Working plane 0.72m
Based on an open plan of 16.8m x 16.8m/21m x 21m
Fitting A B C D E WeightAureled Dropped ETB 600 600 48 43 20 6.4kg
Nominal dimensions (mm)
Wattage Size System lm lm/W Colour temp Code Suffix
Exposed T-Bar
20.7w 600 x 600 3000 124 4000k EL-AUR-1160-
34.3w 600 x 600 5000 122 4000k EL-AUR-1161-
20.7w 600 x 600 2900 119 3000k EL-AUR-1195-
34.3w 600 x 600 4840 118 3000k EL-AUR-1196-
AURELED DROPPED
D
E
F
C
1 2
B
A
321 5
C
D
4 6 7 8
A
B
E
REVISION DESCRIPTION BY DATE CH'D BY DATELOCATION
A --- Initial Design
DO NOT SCALE - IF IN DOUBT, ASK
frank.m
Peter.Prodromos
14/06/2012EL-AUR-414-800-000
Scale:
Checked By: Sheet: A3Sheet Size:
Note: Unless specified otherwise, all dimensions
are in millimeters
eagle lighting australia 'Member of Fagerhult Group'
17-19 Jets Court, Melbourne Airport VIC 3045 t. 03 9344 7444 f. 03 9344 7433
www.eaglelighting.com.au
Assem Code/Drw No:
Drawn By:
1 of 1
Assem Name:
Rev.
43
D
E
F
C
1 2
B
A
321 5
C
D
4 6 7 8
A
B
E
REVISION DESCRIPTION BY DATE CH'D BY DATELOCATION
A --- Initial Design
DO NOT SCALE - IF IN DOUBT, ASK
frank.m
Peter.Prodromos
14/06/2012EL-AUR-414-800-000
Scale:
Checked By: Sheet: A3Sheet Size:
Note: Unless specified otherwise, all dimensions
are in millimeters
eagle lighting australia 'Member of Fagerhult Group'
17-19 Jets Court, Melbourne Airport VIC 3045 t. 03 9344 7444 f. 03 9344 7433
www.eaglelighting.com.au
Assem Code/Drw No:
Drawn By:
1 of 1
Assem Name:
Rev.
43
A
DCE
B
LED IP44
Technical specifications
Total luminaire efficacy 124lm/W
MacAdam 3 SDCM
CRI > 83
Luminaire lifetime L80/F10/50,000h
LLMF L92/30,000h L90/37,000h
Greenstar: 2.4m x 2.4m = 1.01W/m2/100 lux
3.0m x 3.0m = 0.97W/m2/100 lux
Wiring options Suffix
Standard 000
DSI/STD terminal block 100
DALI/STD terminal block 200
Standard/Fused terminal block 400
DSI/Fused terminal block 500
DALI/Fused terminal block 600
Maintained emergency 800
DALI monitored emergency 801
www.eaglelighting.com.au 24
< contents
Encompassing a range of new technology and innovative design features, Aureled Edge is characterised by a level surface but is dropped from the ceiling, giving exciting effects and a pleasant ambient light.
It delivers an impressive system efficacy of up to 123lm/w whilst maintaining excellent glare control for office environments.
The Aureled Edge will slide into confined spaces. Coupled with a detachable gearbox incorporating a plug-and-play connector this luminaire is the perfect solution for locations where other services are likely to be fouled.
Once installed, the gearbox can be detached from the luminaire housing as required whether for upgrading to dimming or maintenance.
Aureled Edge takes LED technology and turns it into a truly viable solution for full general lighting, capable of replacing luminaires using older T5 technology.
Options: » Organic Response Enabled integral » Surface/plaster » CRI > 90 » Seismic Restraint
All system lumen output measurements are calculated using LEDs with a 4000k colour temperature.
Performance Summary
Spacing
2.4m x 2.4m - 20.3w = 351.08 lux
3.0m x 3.0m - 34.3w = 394.11 lux
Design parameters
Maintenance 0.8
Reflectance 70/50/20
Ceiling height 2.7m
Working plane 0.72m
Based on an open plan of 16.8m x 16.8m/21m x 21m
Nominal dimensions (mm)
Wattage Size System lm lm/W Colour temp Code Suffix
Exposed T-Bar
20.7w 600 x 600 3000 123 4000k EL-AUR-1162-
34.3w 600 x 600 5000 121 4000k EL-AUR-1163-
20.7w 600 x 600 2900 119 3000k EL-AUR-1197-
34.3w 600 x 600 4840 117 3000k EL-AUR-1198-
AURELED EDGE
Fitting A B C D E WeightAureled Edge ETB 600 600 48 43 16 6.4kg
D
E
F
C
1 2
B
A
321 5
C
D
4 6 7 8
A
B
E
REVISION DESCRIPTION BY DATE CH'D BY DATELOCATION
A --- Initial Design
DO NOT SCALE - IF IN DOUBT, ASK
frank.m
Peter.Prodromos
14/06/2012EL-AUR-414-800-000
Scale:
Checked By: Sheet: A3Sheet Size:
Note: Unless specified otherwise, all dimensions
are in millimeters
eagle lighting australia 'Member of Fagerhult Group'
17-19 Jets Court, Melbourne Airport VIC 3045 t. 03 9344 7444 f. 03 9344 7433
www.eaglelighting.com.au
Assem Code/Drw No:
Drawn By:
1 of 1
Assem Name:
Rev.
43
D
E
F
C
1 2
B
A
321 5
C
D
4 6 7 8
A
B
E
REVISION DESCRIPTION BY DATE CH'D BY DATELOCATION
A --- Initial Design
DO NOT SCALE - IF IN DOUBT, ASK
frank.m
Peter.Prodromos
14/06/2012EL-AUR-414-800-000
Scale:
Checked By: Sheet: A3Sheet Size:
Note: Unless specified otherwise, all dimensions
are in millimeters
eagle lighting australia 'Member of Fagerhult Group'
17-19 Jets Court, Melbourne Airport VIC 3045 t. 03 9344 7444 f. 03 9344 7433
www.eaglelighting.com.au
Assem Code/Drw No:
Drawn By:
1 of 1
Assem Name:
Rev.
43
LED IP44
Technical specifications
Total luminaire efficacy 123lm/W
MacAdam 3 SDCM
CRI > 83
Luminaire lifetime L80/F10/50,000h
LLMF L92/30,000h L90/37,000h
Greenstar: 2.4m x 2.4m = 1.00W/m2/100 lux
3.0m x 3.0m = 0.97W/m2/100 lux
A
DCE
B
Wiring options Suffix
Standard 000
DSI/STD terminal block 100
DALI/STD terminal block 200
Standard/Fused terminal block 400
DSI/Fused terminal block 500
DALI/Fused terminal block 600
Maintained emergency 800
DALI monitored emergency 801
www.eaglelighting.com.au 25
< contents
Encompassing a range of new technology and innovative design features, Aureled Flow is an optical illusion. Seen from below, the luminaire is completely level and square, but at a distance it changes shape and the light appears to flow out of it.
It delivers an impressive system efficacy of up to 123lm/w whilst maintaining excellent glare control for office environments.
The Aureled Flow will slide into confined spaces. Coupled with a detachable gearbox incorporating a plug-and-play connector this luminaire is the perfect solution for locations where other services are likely to be fouled.
Once installed, the gearbox can be detached from the luminaire housing as required whether for upgrading to dimming or maintenance.
Aureled Flow takes LED technology and turns it into a truly viable solution for full general lighting, capable of replacing luminaires using older T5 technology.
Options: » Organic Response Enabled integral » Surface/plaster » CRI > 90 » Seismic Restraint
All system lumen output measurements are calculated using LEDs with a 4000k colour temperature.
Performance Summary
Spacing
2.4m x 2.4m - 20.3w = 348.79 lux
3.0m x 3.0m - 34.3w = 388.03 lux
Design parameters
Maintenance 0.8
Reflectance 70/50/20
Ceiling height 2.7m
Working plane 0.72m
Based on an open plan of 16.8m x 16.8m/21m x 21m
AURELED FLOWWattage Size System lm lm/W Colour temp Code Suffix
Exposed T-Bar
20.7w 600 x 600 3000 123 4000k EL-AUR-1164-
34.3w 600 x 600 5000 122 4000k EL-AUR-1165-
20.7w 600 x 600 2900 119 3000k EL-AUR-1199-
34.3w 600 x 600 4840 118 3000k EL-AUR-1200-
Fitting A B C D E WeightAureled Flow ETB 600 600 48 43 80 6.4kg
Nominal dimensions (mm)
D
E
F
C
1 2
B
A
321 5
C
D
4 6 7 8
A
B
E
REVISION DESCRIPTION BY DATE CH'D BY DATELOCATION
A --- Initial Design
DO NOT SCALE - IF IN DOUBT, ASK
frank.m
Peter.Prodromos
14/06/2012EL-AUR-414-800-000
Scale:
Checked By: Sheet: A3Sheet Size:
Note: Unless specified otherwise, all dimensions
are in millimeters
eagle lighting australia 'Member of Fagerhult Group'
17-19 Jets Court, Melbourne Airport VIC 3045 t. 03 9344 7444 f. 03 9344 7433
www.eaglelighting.com.au
Assem Code/Drw No:
Drawn By:
1 of 1
Assem Name:
Rev.
43
D
E
F
C
1 2
B
A
321 5
C
D
4 6 7 8
A
B
E
REVISION DESCRIPTION BY DATE CH'D BY DATELOCATION
A --- Initial Design
DO NOT SCALE - IF IN DOUBT, ASK
frank.m
Peter.Prodromos
14/06/2012EL-AUR-414-800-000
Scale:
Checked By: Sheet: A3Sheet Size:
Note: Unless specified otherwise, all dimensions
are in millimeters
eagle lighting australia 'Member of Fagerhult Group'
17-19 Jets Court, Melbourne Airport VIC 3045 t. 03 9344 7444 f. 03 9344 7433
www.eaglelighting.com.au
Assem Code/Drw No:
Drawn By:
1 of 1
Assem Name:
Rev.
43
LED IP44
Technical specifications
Total luminaire efficacy 123lm/W
MacAdam 3 SDCM
CRI > 83
Luminaire lifetime L80/F10/50,000h
LLMF L92/30,000h L90/37,000h
Greenstar: 2.4m x 2.4m = 1.01W/m2/100 lux
3.0m x 3.0m = 0.99W/m2/100 lux
A
DCE
B
Wiring options Suffix
Standard 000
DSI/STD terminal block 100
DALI/STD terminal block 200
Standard/Fused terminal block 400
DSI/Fused terminal block 500
DALI/Fused terminal block 600
Maintained emergency 800
DALI monitored emergency 801
www.eaglelighting.com.au 26
< contents
Performance Summary
Spacing
1200 x 300: 2.4m x 2.7m - 25.7w = 333.67 lux
1500 x 300: 3.0m x 2.7m - 31.9w = 326.75 lux
Design parameters
Maintenance 0.8
Reflectance 70/50/20
Ceiling height 2.7m
Working plane 0.72m
Based on an open plan of 2.4m x 2.7m = 16.8m x 18.9m 3.0m x 2.7m = 21m x 18.9m
Fitting A B C WeightETB 3 op 300 x 1200 300 1200 48 5.9ETB 3 op 300 x 1500 300 1500 48 7.1
Nominal dimensions (mm)
Encompassing a range of new technology and innovative design features, Aureled Multisquare is not only outstanding in performance, but architectural in its form with multiple luminous openings designed into the one housing.
It delivers an impressive system efficacy ofup to 100lm/w whilst maintaining excellent glare control for office environments.
Designed and constructed with a shallow 48mm profile the Aureled Multisquare will slide into confined spaces. Coupled with a detachable gearbox incorporating a plug-and-play connector this luminaire is the perfect solution for locations where other services are likely to be fouled.
Once installed, the gearbox can be detached from the luminaire housing as required whether for upgrading to dimming or maintenance.
Aureled Multisquare takes LED technology and turns it into a truly viable solution for full general lighting, capable of replacing luminaires using older T5 technology.
Options: » Organic Response Enabled integral » Surface/plaster » CRI > 90 » Seismic Restraint
All system lumen output measurements are calculated using LEDs with a 4000k colour temperature.
Wattage Size System lm lm/W Colour temp Code Suffix
Exposed T-Bar
25.7w 300 x 1200 3750 100 4000k EL-AUR-1120-
31.9w 300 x 1500 4440 96 4000k EL-AUR-1124-
25.7w 300 x 1200 3630 97 3000k EL-AUR-1121-
31.9w 300 x 1500 4290 96 3000k EL-AUR-1193-
AURELED MULTISQUARE
Technical specifications
Total luminaire efficacy 100lm/W
MacAdam 3 SDCM
CRI > 83
Luminaire lifetime L80/F10/50,000h
LLMF L92/30,000h L90/37,000h
Greenstar: 1200 x 300 = 1.18W/m2/100 lux
1500 x 300 = 1.20W/m2/100 lux
LED IP44
A
C
B
Wiring options Suffix
Standard 000
DSI/STD terminal block 100
DALI/STD terminal block 200
Standard/Fused terminal block 400
DSI/Fused terminal block 500
DALI/Fused terminal block 600
Maintained emergency 800
DALI monitored emergency 801
www.eaglelighting.com.au 27
< contents
With a system power consumption as low as 23w and an impressive system efficacy of up to 101lm/W, the linjar is ideal for offices and general lighting applications.
The central prism section directs the light downwards whilst the flanking secondary streams push the light side-wards. The contrast between these sections creates a soft transition between the luminaire and the ceiling. This controls the light in the 65 degree plane to within 3000cd/m2, thus ensuring a visually comfortable workplace.
The electronic driver is mounted to the rear of the luminaire in an isolated thermal chamber. By separating the driver, the LEDs within the luminaire are kept at their lowest possible operating temperature. This ensures that the Linjar can offer the longest possible lifetime of its LED components.
The LED boards used in the Linjar have been selected to achieve Zhaga compliance. By using this LED solution the boards are easily replaced/upgraded to take advantage of the latest available LED technology and energy savings.
Options:» Organic Response Enabled integral» Surface/Plaster» CRI >90» Cyanosis» Tunable white
Wiring options Suffix
Standard 000
DSI/STD terminal block 100
DALI/STD terminal block 200
Standard/Fused terminal block 400
DSI/Fused terminal block 500
DALI/Fused terminal block 600
Maintained emergency 800
DALI monitored emergency 801
Technical specifications
Total Luminaire Efficacy Maximum 101
MacAdam 3 SDCM
CRI > 82
Lifetime L70(6k)/F10/100,000hrs
LLMF L90(6k) >36,000hrs L92(6k) 30,000hrs
Passive cooling
System guarantee 5 years
Greenstar: 2.4m x 2.4m = 1.20W/m2/100 lux
2.4m x 2.7m = 1.21W/m2/100 lux
Performance Summary
Spacing
2.4m x 2.4m - 23w = 332.17 lux
2.4m x 2.7m - 27w = 350.70 lux
Design parameters
Maintenance 0.8
Reflectance 70/50/20
Ceiling height 2.7m
Working plane 0.72m
Based on an open plan of 16.8m x 16.8m / 16.8m x 18.9m
Fitting A B C WeightETB 600 x 300 600 300 95 2.8ETB 1200 x 300 1200 300 95 5.0
A B
Nominal dimensions (mm)
Wattage Size System lm lm/W Colour temp Code Suffix
Exposed T-Bar
12W 600x300 1325 94 3000k EL-LIN-1100-
14W 600x300 1560 93 3000k EL-LIN-1101-
23W 1200x300 2650 97 3000k EL-LIN-1104-
27W 1200x300 3120 96 3000k EL-LIN-1105-
12W 600x300 1380 98 4000k EL-LIN-1102-
14W 600x300 1625 97 4000k EL-LIN-1103-
23W 1200x300 2760 101 4000k EL-LIN-1106-
27W 1200x300 3250 100 4000k EL-LIN-1107-
Seismic Restraint Kit - 4 X GRIPPLE, 2 X 2M WIRE EL-ACC-210-000
linjArLED IP44/20
B
C
A
C
B
C
A
www.eaglelighting.com.au 28
< contents
The combination of a V-shaped reflector and CDP diffuser have been used to mask the harsh micro points of LEDs, creating a panel of perfectly uniform luminance.
The Vertex is positioned as the ideal solution for office and general lighting with an efficacy of 91lm/W,
The electronic driver is mounted to the rear of the luminaire, in an isolated thermal chamber. By separating the driver, the LEDs within the luminaire are kept at their lowest possible operating temperature. This ensures that the Vertex can offer the longest possible lifetime of its LED components. The expected useful lifetime of the Vertex is L70 at 100,000 hours.
The LED boards used in the Vertex have been selected to achieve Zhaga compliance. By using this upgradeable/interchangeable LED solution the boards are easily replaced/upgraded to take advantage of the latest available LED technology and energy savings.
Options:» Plaster recessed» Surface mounted» Emergency» Organic Response Enabled» High Output » Seismic Restraint
Wiring options Suffix
Standard 000
DSI/STD terminal block 100
DALI/STD terminal block 200
Standard/Fused terminal block 400
DSI/Fused terminal block 500
DALI/Fused terminal block 600
Maintained emergency 800
DALI monitored emergency 801
Organic Response 900
Performance Summary
Spacing
2.4m x 2.4m - 25w = 328.39 lux
2.4m x 2.7m - 29w = 333.80 lux
Design parameters
Maintenance 0.8
Reflectance 70/50/20
Ceiling height 2.7m
Working plane 0.72m
Based on an open plan of 16.8m x 18.9m
Fitting A B C WeightETB 600 x 300 600 300 85 3.0ETB 1200 x 300 1200 300 85 6.0ETB 1500 x 300 1500 300 85 7.0
A B
Nominal dimensions (mm)
Wattage Size System lm lm/W Colour temp Code Suffix
Exposed T-Bar - 1 Row
13W 600x300 1500 91 4000k EL-VER-1101
15W 600x300 1700 87.4 4000k EL-VER-1103
23W 600x300 2750 91 4000k EL-VER-1104
25W 1200x300 3000 91 4000k EL-VER-1112
29W 1200x300 3400 87.4 4000k EL-VER-1115
46W 1200x300 5500 91 4000k EL-VER-1116
31W 1500x300 3750 91 4000k EL-VER-1124
Seismic Restraint Kit - 4 x gripple, 2 x 2m wire EL-ACC-210-000
VERTEXLED IP44/20
B
C
A
C
B
C
A
Technical specifications
Total Luminaire Efficacy Maximum > 91lm/W
MacAdam 3 SDCM
CRI > 84
Lifetime L70(6k)/F10/100,000hrs
LLMF L90(6k) >36,000hrs L92(6k) 30,000hrs
System guarantee 5 years
Greenstar: 2.4m x 2.4m = 1.31W/m2/100 lux
2.4m x 2.7m = 1.50W/m2/100 lux
www.eaglelighting.com.au 29
< contents
The combination of a V-shaped reflector and CDP diffuser have been used to mask the harsh micro points of LEDs, creating a panel of perfectly uniform luminance.
The Vertex is positioned as the ideal solution for office and general lighting with an efficacy of 91lm/W,
The electronic driver is mounted to the rear of the luminaire, in an isolated thermal chamber. By separating the driver, the LEDs within the luminaire are kept at their lowest possible operating temperature. This ensures that the Vertex can offer the longest possible lifetime of its LED components. The expected useful lifetime of the Vertex is L70 at 100,000 hours.
The LED boards used in the Vertex have been selected to achieve Zhaga compliance. By using this upgradeable/interchangeable LED solution the boards are easily replaced/upgraded to take advantage of the latest available LED technology and energy savings.
Options:» Plaster recessed» Surface mounted» Emergency» Organic Response Enabled» High Output » Seismic Restraint
Performance Summary
Spacing
2.4m x 2.4m - 25w = 328.39 lux
2.4m x 2.7m - 29w = 333.80 lux
Design parameters
Maintenance 0.8
Reflectance 70/50/20
Ceiling height 2.7m
Working plane 0.72m
Based on an open plan of 16.8m x 16.8m
Fitting A B C WeightETB 600 x 300 600 300 85 2.8ETB 1200 x 300 1200 300 85 5.0ETB 1500 x 300 1500 300 85 6.0
Nominal dimensions (mm)
Wattage Size System lm lm/W Colour temp Code Suffix
Exposed T-Bar - 1 Row
13W 600x300 1500 91 4000k EL-VERA-1101
25W 1200x300 3000 91 4000k EL-VERA-1109
31W 1500x300 3750 91 4000k EL-VERA-1124
Seismic Restraint Kit - 4 x gripple, 2 x 2m wire EL-ACC-210-000
VERTEX AIRLED IP44/20
Technical specifications
Total Luminaire Efficacy Maximum > 91lm/W
MacAdam 3 SDCM
CRI > 84
Lifetime L70(6k)/F10/100,000hrs
LLMF L90(6k) >36,000hrs L92(6k) 30,000hrs
System guarantee 5 years
Greenstar: 2.4m x 2.4m = 1.31W/m2/100 lux
2.4m x 2.7m = 1.50W/m2/100 lux
DIMENSIONS DIAGRAM
+ PLEASE READ THIS GUIDE CAREFULLY BEFORE INSTALLING OR MAINTAINING THIS EQUIPMENT.
+ DATA SHOULD BE USED AS AN INDICATION ONLY. + GOOD ELECTRICAL PRACTICES SHOULD BE FOLLOWED AT ALL TIMES. + MUST ONLY BE INSTALLED BY A LICENSED ELECTRICIAN. + IF THE EXTERNAL FLEXIBLE CABLE OR CORD OF THIS LUMINAIRE IS DAMAGED, IT
SHALL BE EXCLUSIVELY REPLACED BY THE MANUFACTURER OR HIS SERVICE AGENT OR A SIMILAR QUALIFIED PERSON IN ORDER TO AVOID A HAZARD
+ FOR INDOOR USE ONLY
N18226
SPECIFICATIONLuminaire’s light distribution is direct.
LED Denotes which light source/light sources that can be supplied with the luminaire. Several symbols next to the same luminaire indicate that the luminaire is available in different designs.
Class I : Appliances with functioning insulation. Equipped with an earth termination.
Luminaire is available in designs for conventional emergency lighting operation.
Luminaire may be installed against materials that are normally combustible.
IP classification:IP44 : Protected against solid objects over 1mm (tools, wires and small wires). Protection against splashing water from
any direction (splash proff). Limited ingress permitted.
INSTALLATION GUIDETHIS GUIDE IS FOR THE FOLLOWING LUMINAIRE VARIATIONS:
+ T-Bar + Plaster Recessed + Surface Mounted
VERTEX AIR
www.eaglelighting.com.au/vertex_air
PRODUCT CODE LIGHT SOURCE/DESCRIPTION (NOM) DIMENSIONSLUMINOUS
FLUXEFFICACY
LM/WLUMINAIRE
POWER A B C Weight(kg)
VERTEX AIR EXPOSED T-BAR
EL-VERA-8140200T-0 1 ROW, DELTA, 4K, 1300LM 1150 72.3 15.9 600 300 85 2.8
EL-VERA-8141200T-0 1 ROW, DELTA, 4K, 2600LM 2300 79.6 28.8 1200 300 85 5.0
EL-VERA-8142200T-0 1 ROW, DELTA, 4K, 3250LM 2867 81.6 35.2 1500 300 85 6.0
IP44
C
B
A
VERTEX AIR DIM DRW FOR DATAWEIGHT:
A1
SHEET 1 OF 1SCALE:1:5
DWG NO.
TITLE:
REVISIONDO NOT SCALE DRAWING
MATERIAL:
DATESIGNATURENAME
DEBUR AND BREAK SHARP EDGES
FINISH:UNLESS OTHERWISE SPECIFIED:DIMENSIONS ARE IN MILLIMETERSSURFACE FINISH:TOLERANCES: LINEAR: ANGULAR:
Q.A
MFG
APPV'D
CHK'D
DRAWN
Wiring options Suffix
Standard 000
DSI/STD terminal block 100
DALI/STD terminal block 200
Standard/Fused terminal block 400
DSI/Fused terminal block 500
DALI/Fused terminal block 600
Maintained emergency 800
DALI monitored emergency 801
Organic Response 900
www.eaglelighting.com.au 30
< contents
HyPERION AgA highly efficient luminaire designed to exceed Greenstar and BcA requirements.
TECHNICAL INFORMATIONIES INDOOR REPORTPHOTOMETRIC FILENAME : LL15495.IES
POLAR GRAPH
135
269
404
539
1
Maximum Candela = 538.97 Located At Horizontal Angle = 0, Vertical Angle = 0# 1 - Vertical Plane Through Horizontal Angles (0 - 180) (Through Max. Cd.)
Photometric Toolbox Professional Edition - Copyright 2002-2011 by Lighting Analysts, Inc.Calculations based on published IES Methods and recommendations, values rounded for display purposes.Results derived from content of manufacturers photometric file.
Page 1
Miro-siLVEr® rEfLEcTor
Named after the Titan god of light and to represent it’s unique reflector, Hyperion Ag is the perfect luminaire for commercial interiors where there is a need to meet or exceed BcA and Greenstar requirements.
it will accept a wide range of prismatic panels which are located within the luminaire body.
The full body construction means the luminaire can remain in-situ while the lens panel is removed for maintenance or lamp replacement, reducing lifecycle costs.
Hyperion Ag produces a high Lor whilst achieving even luminance across the lens. using 3.0m x 2.4m spacing, the Hyperion Ag achieves 320 lux with a uniformity of 0.7 and maintenance factor of 0.8. illumination power density is as little as 4.4W/m2 thereby reducing energy costs and co2 emissions.
OPtIONS
+ seismic restraint
HYpErioN Ag 1x28W | Lor 107%
N18226
PRODUCT CODE LIGHT SOURCE/DESCRIPTION (NOM) DIMENSIONSA B c cuTouT WEiGHT
Hyperion Ag ExposED T-BAr
EL-HYp-114-_01-___ 1 x 14W T5 600 300 100
EL-HYp-124-_01-___ 1 x 24W T5 600 300 100
EL-HYp-128-_04-___ 1 x 28W T5 1200 300 100
EL-HYp-135-_07-___ 1 x 35W T5 1500 300 100
EL-HYp-154-_04-___ 1 x 54W T5 1200 300 100
Hyperion Ag surfAcE MouNTED
EL-HYp-114-_11-___ 1 x 14W T5 600 300 100
EL-HYp-124-_11-___ 1 x 24W T5 600 300 100
EL-HYp-128-_14-___ 1 x 28W T5 1200 300 100
EL-HYp-135-_17-___ 1 x 35W T5 1500 300 100
EL-HYp-154-_14-___ 1 x 54W T5 1200 300 100
DIFFUSER PANEL OPTIONS SUFFIx
p19 -100
vARIATION SUFFIx
standard -000
Dsi/sTD terminal block -100
DALi/sTD terminal block -200
standard/fused terminal block -400
Dsi/fused terminal block -500
DALi/fused terminal block -600
ExAMPLE ONLYDIFFUSER
WIRING vARIATION
EL-HyP-114-800-000
A
C
B
Installation InstructionWEIGHT:
A1
SHEET 1 OF 1SCALE:1:1
DWG NO.
TITLE:
REVISIONDO NOT SCALE DRAWING
MATERIAL:
DATESIGNATURENAME
DEBUR AND BREAK SHARP EDGES
FINISH:UNLESS OTHERWISE SPECIFIED:DIMENSIONS ARE IN MILLIMETERSSURFACE FINISH:TOLERANCES: LINEAR: ANGULAR:
Q.A
MFG
APPV'D
CHK'D
DRAWN
A
C
B
Installation InstructionWEIGHT:
A1
SHEET 1 OF 1SCALE:1:1
DWG NO.
TITLE:
REVISIONDO NOT SCALE DRAWING
MATERIAL:
DATESIGNATURENAME
DEBUR AND BREAK SHARP EDGES
FINISH:UNLESS OTHERWISE SPECIFIED:DIMENSIONS ARE IN MILLIMETERSSURFACE FINISH:TOLERANCES: LINEAR: ANGULAR:
Q.A
MFG
APPV'D
CHK'D
DRAWN
IP30
for plaster variation, please see plaster accessories on page 40.
www.eaglelighting.com.au 31
< contents
LiNED DiffusEr BETA LouVrE
TECHNICAL INFORMATION
265
529
794
1058
1
INDIGO COMBOA highly efficient luminaire for recessed installation in ventilated or unventilated suspended ceilings
The uncomplicated and clean recessed design, combined with high efficiency and technical performance allows indigo combo to create comfortable environments by reducing cavernous effects.
indigo combo is available in square or rectangular designs and in two sizes with one or two louvre cells with up to four light sources. The active Beta louvre can be combined with an indirect light distribution in the luminaire’s secondary reflector.
in addition, the Beta luminaire’s lined diffuser can be finished in several different colours, offering a decorative indirect light, for exciting and distinctive environments.
OPtIONS
+ return/supply Air
+ Baffles
+ organic response Enabled
+ seismic restraint
C
B
A
C
B
A
iNDiGo coMBo 1x28W | Lor 88%
N18226
PRODUCT CODE LIGHT SOURCE/DESCRIPTION (NOM) DIMENSIONSA B c cuTouT
iNDiGo coMBo ExposED T-BAr
EL-24855-128-100-_ 1 x 25/28W 300 1200 130
EL-24856-228-100-_ 2 x 25/28W 300 1200 130
EL-24857-154-100-_ 1 x 50/54W 300 1200 130
EL-24871-128-100-_ 1 x 25/28W 600 1200 130
EL-24872-228-100-_ 2 x 25/28W 600 1200 130
EL-24873-154-100-_ 1 x 50/54W 600 1200 130
EL-24862-214-100-_ 2 x 13/14W 600 600 130
EL-24864-224-100-_ 2 x 20/24W 600 600 130
vARIATION SUFFIx
standard -0
Dsi/sTD terminal block -1
DALi/sTD terminal block -2
1-10V/sTD terminal block -3
standard/fused terminal block -4
Dsi/fused terminal block -5
DALi/fused terminal block -6
1-10V/fused terminal block -7
IP20
www.eaglelighting.com.au 32
< contents
ExposED T-BArExposED T-BAr
TECHNICAL INFORMATION
vARIATION SUFFIx
standard -000
Dsi/sTD terminal block -100
DALi/sTD terminal block -200
1-10V/sTD terminal block -300
standard/fused terminal block -400
Dsi/fused terminal block -500
DALi/fused terminal block -600
1-10V/fused terminal block -700
MULtIFIvE G2High efficiency luminaire designed for BcA and Greenstar applications
PRODUCT CODE LIGHT SOURCE/DESCRIPTION (NOM) DIMENSIONSA B c cuTouT
MuLTifiVE G2 ExposED T-BAr
EL-25480-114-101-___ 1 x 14W T5 600 300 75
EL-25482-214-100-___ 2 x 14W T5 600 300 75
EL-25483-314-100-___ 3 x 14W T5 600 600 75
EL-25484-414-100-___ 4 x 14W T5 600 600 75
EL-25485-128-100-___ 1 x 28W T5 1200 150 75
EL-25485-128-101-___ 1 x 28W T5 1200 300 75
EL-25487-228-100-___ 2 x 28W T5 1200 300 75
EL-25488-135-102-___ 1 x 35W T5 1500 300 75
MuLTifiVE G2 pLAsTEr rEcEssED
EL-25480-114-105-___ 1 x 14W T5 650 300 75 615 155
EL-25482-214-102-___ 2 x 14W T5 650 300 75 615 275
EL-25485-128-103-___ 1 x 28W T5 1250 300 75 1225 155
EL-25487-228-102-___ 2 x 28W T5 1250 300 75 1225 275
EL-25488-135-103-___ 1 x 35W T5 1550 300 75 1525 155
MuLTifiVE G2 surfAcE MouNTED
EL-25485-128-104-___ 1 x 28W T5 single cell 1200 150 75
EL-25487-228-104-___ 2 x 28W T5 Twin cell 1200 270 75
EL-25486-228-105-___ 2 x 28W T5 single cell 1200 150 75
EL-25488-135-104-___ 1 x 35W T5 single cell 1500 150 75
The Multifive G2 range of luminaires utilise r5 Beta louvre technology to provide light output ratios of 92% whilst meeting As1680 luminance requirements, as well as European EN12464-1 visual comfort guide lines.
The Beta louvre features double parabolic cross blades with a reflector made of special satin matte material providing a high Lor with excellent visual comfort.
Multifive G2 luminaires are used extensively where BcA and Greenstar requirements dictate high efficiency and low power density.
OPtIONS
+ organic response Enabled
+ Emergency
+ seismic restraintB
A
C
325
650
976
1301
1
MuLTifiVE G2 1x28W | Lor 92%
N18226
IP20
www.eaglelighting.com.au 33
< contents
TECHNICAL INFORMATION
325
650
976
1301
1
vARIATION SUFFIx
standard -0
Dsi/sTD terminal block -1
DALi/sTD terminal block -2
1-10V/sTD terminal block -3
standard/fused terminal block -4
Dsi/fused terminal block -5
DALi/fused terminal block -6
1-10V/fused terminal block -7
PRODUCT CODE LIGHT SOURCE/DESCRIPTION (NOM) DIMENSIONSA B c
MuLTifiVE Air G2 ExposED T-BAr
EL-25480LA-114-101-_ 1 x 14W T5 600 300 75
EL-25482LA-214-100-_ 2 x 14W T5 600 300 75
EL-25483LA-314-100-_ 3 x 14W T5 600 600 75
EL-25484LA-414-100-_ 4 x 14W T5 600 600 75
EL-25485LA-128-101-_ 1 x 28W T5 1200 300 75
EL-25487LA-228-100-_ 2 x 28W T5 1200 300 75
EL-25488LA-135-102-_ 1 x 35W T5 1500 300 75
MULtIFIvE AIR G2combination light/air fixture suitable for supply or return air applications
Multifive Air G2 is a combined light/air fitting with elongated slots provided in the fascia of the luminaire.
return air is drawn into the ceiling plenum via the air slots provided. supply air can also be provided through an air register which is coordinated by the mechanical and electrical engineer. The air register mounts on top of the slots and is positively fixed to the luminaire with optional brackets.
Multifive Air G2 shares the same optical system as Multifive G2. This ensures a lighting solution that provides flexibility, high efficiency and excellent glare control.
OPtIONS
+ organic response Enabled
+ Emergency
+ seismic restraint
B
A
C
N18226
ExposED T-BArExposED T-BAr
MuLTifiVE Air G2 1x28W | Lor 92%
IP20
www.eaglelighting.com.au 34
< contents
TECHNICAL INFORMATION
sATiN MATTE ALuMiNiuM Miro 5 LouVrE
124
248
373
497
1
vARIATION SUFFIx
standard -000
Dsi/sTD terminal block -100
DALi/sTD terminal block -200
1-10V/sTD terminal block -300
standard/fused terminal block -400
Dsi/fused terminal block -500
DALi/fused terminal block -600
1-10V/fused terminal block -700
PRODUCT CODE LIGHT SOURCE/DESCRIPTION (NOM) DIMENSIONSA B c cuTouT
pENTA G2 ExposED T-BAr
EL-pG2-114-100-___ 1 x 14W T5 600 300 65
EL-pG2-114-101-___ 1 x 14W T5 600 150 65
EL-pG2-128-100-___ 1 x 28W T5 1200 300 65
EL-pG2-128-101-___ 1 x 28W T5 1200 150 65
EL-pG2-228-100-___ 2 x 28W T5 1200 300 65
EL-pG2-214-100-___ 2 x 14W T5 600 300 65
EL-pG2-314-100-___ 3 x 14W T5 600 600 65
EL-pG2-414-100-___ 4 x 14W T5 600 600 65
pENTA G2 pLAsTEr rEcEssED
EL-pG2-128-102-___ 1 x 28W T5 1250 300 65 1225 155
EL-pG2-228-102-___ 2 x 28W T5 1250 300 65 1225 275
EL-pG2-214-102-___ 2 x 14W T5 650 300 65 615 275
EL-pG2-314-102-___ 3 x 14W T5 650 450 65 615 405
EL-pG2-414-102-___ 4 x 14W T5 650 610 65 615 575
pENTA G2 surfAcE MouNTED
EL-pG2-114-103-___ 1 x 14W T5 600 150 65
EL-pG2-128-104-___ 1 x 28W T5 1200 150 65
EL-pG2-228-104-___ 2 x 28W T5 1200 270 65
PENtA G2A commercial range of low brightness T5 luminaires suitable for office spaces
The penta G2 range of luminaires utilise T5 lamps and are available in popular module sizes. single and multi lamp versions are also available.
penta G2 features a satin matte aluminium louvre. The shallow depth of the luminaire lends itself to installations where there is an abundance of mechanical and electrical services in the ceiling cavity.
The penta G2 range meets all statutory requirements and is suitable for most commercial interiors.
OPtIONS
+ organic response Enabled
+ Emergency
+ Seismic RestraintB
A
C
pENTA G2 1x28W | Lor 81%
N18226
IP20
www.eaglelighting.com.au 35
< contents
TECHNICAL INFORMATION
ExposED T-BAr
vARIATION SUFFIx
standard -000
Dsi/sTD terminal block -100
DALi/sTD terminal block -200
1-10V/sTD terminal block -300
standard/fused terminal block -400
Dsi/fused terminal block -500
DALi/fused terminal block -600
1-10V/fused terminal block -700
124
248
373
497
1
PRODUCT CODE LIGHT SOURCE/DESCRIPTION (NOM) DIMENSIONSA B c
pENTAir G2 ExposED T-BAr
EL-pA2-128-100-___ 1 x 28W T5 1200 300 65
EL-pA2-228-100-___ 2 x 28W T5 1200 300 65
EL-pA2-214-100-___ 2 x 14W T5 600 300 65
EL-pA2-314-100-___ 3 x 14W T5 600 600 65
EL-pA2-414-100-___ 4 x 14W T5 600 600 65
PENtAIR G2A ‘light/air’ variant of the penta G2 series with all the features of the penta range
The pentair G2 luminaire is a variant to the ‘penta G2’ series and is designed to integrate supply or air return requirements.
This can alleviate the necessity for having mechanical air grills in the ceiling, which promotes a cleaner ceiling line.
The pentair G2 like the penta G2 is available in popular module sizes and lamp configurations with a satin matte aluminium louvre as standard.
OPtIONS
+ Blanking strips
+ Black return Air Baffles
+ organic response Enabled
+ Emergency
+ seismic restraintB
A
C
pENTAir G2 1x28W | Lor 81%
N18226
IP20
www.eaglelighting.com.au 36
< contents
TECHNICAL INFORMATION
ENViro 600 x 600 T-BArpErforATED HiNGED METAL BAskET
68
136
204
271
1
vARIATION SUFFIx
standard -000
Dsi/sTD terminal block -100
DALi/sTD terminal block -200
1-10V/sTD terminal block -300
standard/fused terminal block -400
Dsi/fused terminal block -500
DALi/fused terminal block -600
1-10V/fused terminal block -700
PRODUCT CODE LIGHT SOURCE/DESCRIPTION (NOM) DIMENSIONSA B c cuTouT
ENViro ExposED T-BAr
EL-ENV-114-100-___ 1 x 14W T5 600 300 120
EL-ENV-114-101-___ 1 x 14W T5 600 600 130
EL-ENV-214-100-___ 2 x 14W T5 600 300 120
EL-ENV-214-101-___ 2 x 14W T5 600 600 130
EL-ENV-124-100-___ 1 x 24W T5 600 300 120
EL-ENV-124-101-___ 1 x 24W T5 600 600 130
EL-ENV-224-100-___ 2 x 24W T5 600 600 130
EL-ENV-128-100-___ 1 x 28W T5 1200 300 120
EL-ENV-128-101-___ 1 x 28W T5 1200 600 130
EL-ENV-228-100-___ 2 x 28W T5 1200 300 120
EL-ENV-228-101-___ 2 x 28W T5 1200 600 130
ENvIROEnviro provides pleasing, high visual comfort for environments where a high level of vertical illuminance is required
The Enviro features an optical system that greatly reduces contrast brightness thereby providing high visual comfort.
This is achieved by employing a two part optical system comprising of a curved transitional textured Mannex white reflector and a perforated mesh baffle with opal inlay.
Enviro greatly reduces gloomy ‘cavern effect’ interiors by distributing high vertical levels to the walls whilst creating the illusion of a bright ceiling. suitable for T5 lamps and available in 300mm and 600mm module widths.
A hinged basket is fitted to allow for easy lamp replacement.
OPtIONS
+ Air Handling
+ organic response Enabled
+ Emergency
+ seismic restraint
ENViro 1x28W | Lor 80%
A
B
C
N18226
IP20
for plaster variation, please see plaster accessories on page 40.
www.eaglelighting.com.au 37
< contents
ENvIRO DIFFUSEDEnviro provides pleasing, high visual comfort for environments where a high level of vertical illuminance is required
TECHNICAL INFORMATION
vARIATION SUFFIx
standard -000
Dsi/sTD terminal block -100
DALi/sTD terminal block -200
1-10V/sTD terminal block -300
standard/fused terminal block -400
Dsi/fused terminal block -500
DALi/fused terminal block -600
1-10V/fused terminal block -700
Y5 DiffusEr
PRODUCT CODE LIGHT SOURCE/DESCRIPTION (NOM) DIMENSIONSA B c
ENViro DiffusED p5
EL-END-114-200-___ 1 x 14W p5 T-BAr 600 300 120
EL-END-128-200-___ 1 x 28W p5 T-BAr 1200 300 120
ENViro DiffusED DELTA
EL-END-114-800-___ 1 x 14W Delta T-BAr 600 300 120
EL-END-128-800-___ 1 x 28W Delta T-BAr 1200 300 120
The Enviro Diffused is a luminaire that has unique collaboration between an active secondary gull reflector system and primary diffuser technology.
The diffuser provides an effective working light while the secondary gull reflector enhances balance between the luminous contrast of the luminaire and other surfaces within the room.
OPtIONS
+ Air Handling
+ organic response Enabled
+ Emergency
+ seismic restraint
C
B
A
C
N18226
93
187
280
373
1
ENViro DiffusED DELTA 1x28W | Lor 86%
DIFFUSER PANEL OPTIONS SUFFIx
p5 -2
Delta -8
IP20
for plaster variation, please see plaster accessories on page 40.
www.eaglelighting.com.au 38
< contents
vARIATION SUFFIx
standard -000
Dsi/sTD terminal block -100
DALi/sTD terminal block -200
1-10V/sTD terminal block -300
standard/fused terminal block -400
Dsi/fused terminal block -500
DALi/fused terminal block -600
1-10V/fused terminal block -700
vISIONLINEVisionline utilises new age material and its edgy appearance makes it ideal for modern and high end architectural commercial buildings
PRODUCt CODE LIGHt SOURCE/DESCRIPtION (NOM) DIMENSIONSA B c cuTouT
VisioNLiNE ExposED T-BAr
EL-Vis-114-100-___ 1 x 14W T5 600 150 55
EL-Vis-114-300-___ 1 x 14W T5 600 300 55
EL-Vis-214-300-___ 2 x 14W T5 600 300 55
EL-Vis-424-100-___ 4 x 24W T5 600 600 55
EL-Vis-128-100-___ 1 x 28W T5 1200 150 55
EL-Vis-128-300-___ 1 x 28W T5 1200 300 55
EL-Vis-228-300-___ 2 x 28W T5 1200 300 55
EL-Vis-254-100-___ 2 x 54W T5 1200 300 55
VisioNLiNE pLAsTEr rEcEssED
EL-Vis-114-400-___ 1 x 14W T5 600 260 55 575 220
EL-Vis-214-400-___ 2 x 14W T5 600 260 55 575 220
EL-Vis-414-200-___ 4 x 14W T5 600 600 55 400 575
EL-Vis-424-200-___ 4 x 24W T5 600 600 55 400 575
EL-Vis-128-400-___ 1 x 28W T5 1200 260 55 1175 220
EL-Vis-228-400-___ 2 x 28W T5 1200 260 55 1175 220
VisioNLiNE surfAcE MouNTED
EL-Vis-114-600-___ 1 x 14W T5 600 150 55
EL-Vis-214-600-___ 2 x 14W T5 600 200 55
EL-Vis-128-600-___ 1 x 28W T5 1200 200 55
EL-Vis-228-600-___ 2 x 28W T5 1200 200 55
tECHNICAL INFORMAtION
The Visionline has been developed in response to requirements for an economical, general purpose luminaire that may be used in diverse applications where good lighting, pleasing lines and good visual comfort are of paramount importance.
Visionline’s sleek and modern appearance makes it suitable for offices, boardrooms and retail applications. An extruded aluminium mini frame allows refractive panel to be easily removed and reinstalled and complements Visionline’s appearance.
The Y5 refractor employed by Visionline offers excellent photometric performance. The embossed pearl pattern diffuser has a fine rib (linear reed) that provides superb lamp obscuration and uniform luminance over the entire surface area of the panel.OPtIONS
+ clear Acrylic overlay - cleanroom Application
+ organic response
+ Emergency
+ seismic restraint
68
135
203
270
1
C
B
A
surfAcE MouNTED
VisioNLiNE 1x28W | Lor 65%
N18226
IP20
www.eaglelighting.com.au 39
< contents
FLExItROFFERA general purpose utility range of luminaires suitable for exposed T-Bar or plasterboard ceilings
TECHNICAL INFORMATION
vARIATION SUFFIx
standard -000
Dsi/sTD terminal block -100
DALi/sTD terminal block -200
1-10V/sTD terminal block -300
standard/fused terminal block -400
Dsi/fused terminal block -500
DALi/fused terminal block -600
1-10V/fused terminal block -700
91
182
273
364
1
ExposED T-BArpLAsTEr rEcEssED
PRODUCT CODE LIGHT SOURCE/DESCRIPTION (NOM) DIMENSIONSA B c cuTouT
fLExiTroffEr ExposED T-BAr
EL-fT5 - 114-_00-___ 1 x 14W 600 300 100
EL-fT5 - 214-_00-___ 2 x 14W 600 300 100
EL-fT5 - 314-_04-___ 3 x 14W 600 300 100
EL-fT5 - 314-_00-___ 3 x 14W 600 600 100
EL-fT5 - 414-_00-___ 4 x 14W 600 600 100
EL-fT5 - 128-_00-___ 1 x 28W 1200 300 100
EL-fT5 - 228-_00-___ 2 x 28W 1200 300 100
fLExiTroffEr pLAsTEr rEcEssED
EL-fT5 - 214-_02-___ 2 x 14W 630 330 120 605 305
EL-fT5 - 128-_01-___ 1 x 28W 1230 330 120 1205 305
EL-fT5 - 228-_01-___ 2 x 28W 1230 330 120 1205 305
fLExiTroffEr surfAcE MouNTED
EL-fT5 - 114-_03-___ 1 x 14W 600 300 120
EL-fT5 - 214-_04-___ 2 x 14W 600 300 120
EL-fT5 - 314-_03-___ 3 x 14W 600 600 120
EL-fT5 - 414-_04-___ 4 x 14W 600 600 120
EL-fT5 - 128-_04-___ 1 x 28W 1200 300 120
EL-fT5 - 228-_03-___ 2 x 28W 1200 300 120
B
C
A
The flexitroffer is a general purpose utility fixture suitable for either exposed T-Bar or plasterboard ceilings. it will accept most prismatic panels which are located within the luminaire body. Due to the full body construction the fitting achieves a high Lor with even luminance across the lens.
OPtIONS
+ Hinged frame
+ organic response
+ Air handling
+ Emergency
+ seismic restraint
DIFFUSER PANEL OPTIONS SUFFIx
p19 -1
p5 -2
p7 -3
opal -5
p20 -6
fLExiTroffEr 2x28W | Lor 76%
N18226
IP20
www.eaglelighting.com.au 40
< contents
TECHNICAL INFORMATION
91
182
273
364
1
PRODUCT CODE LIGHT SOURCE/DESCRIPTION (NOM) DIMENSIONSA B c
xT5 oN Top of T-BAr
EL-xT5-114-_00-___ 1x14W 600 300 48
EL-xT5-114-_01-___ 1x14W 600 150 48
EL-xT5-128-_00-___ 1x28W 1200 300 48
EL-xT5-128-_01-___ 1x28W 1200 150 48
EL-xT5-214-_00-___ 2x14W 600 300 48
EL-xT5-214-_01-___ 2x14W 600 150 48
EL-xT5-228-_00-___ 2x28W 1200 300 48
EL-xT5-228-_01-___ 2x28W 1200 150 48
xT5 pLAsTEr rEcEssED
EL-xT5-114-_02-___ 1x14W 600 250 75
EL-xT5-114-_03-___ 1x14W 600 150 75
EL-xT5-128-_02-___ 1x28W 1200 250 75
EL-xT5-128-_03-___ 1x28W 1200 150 75
EL-xT5-214-_02-___ 2x14W 600 250 75
EL-xT5-214-_03-___ 2x14W 600 150 75
EL-xT5-228-_02-___ 2x28W 1200 250 75
EL-xT5-228-_03-___ 2x28W 1200 150 75
xt5 tROFFERAn affordable fluorescent t-bar fitting
The xT5 Troffer is an affordable, general purpose fixture suitable for either exposed t-bar or plasterboard ceilings. it has been economically designed to sit on top of a t-bar, as shown in the diagram to the left. The xT5 can be fitted with most diffuser variations.
+ Emergency kit available upon request
+ Available in recessed t-bar or plaster version
+ seismic restraint
xT5 2x28W
N18226
vARIATION SUFFIx
standard -000
Dsi/sTD terminal block -100
DALi/sTD terminal block -200
1-10V/sTD terminal block -300
standard/fused terminal block -400
Dsi/fused terminal block -500
DALi/fused terminal block -600
1-10V/fused terminal block -700
DIFFUSER PANEL OPTIONS SUFFIx
p19 -1
p5 -2
p7 -3
opal -5
p20 -6
iNTErNAL ViEW xT5 ExposED T-BAr cEiLiNG DiAGrAM
IP20
ExAMPLE ONLYLAMP TYPE DIFFUSER
WIRING vARIATION
EL-xt5-114-200-000
www.eaglelighting.com.au 41
< contents
tROFFER ACCESSORIES
PRODUCT CODE (NOM) DIMENSIONSA B c cuTouT
To coNVErT ANY TWo WAY T-BAr fixTurEs To pLAsTEr
EL-Acc-600-000 600 300 605 310
EL-Acc-601-000 600 600 605 605
EL-Acc-602-000 1200 300 1205 310
EL-Acc-603-000 1200 600 1205 605
EL-Acc-604-000 1200 150 1205 150
EL-Acc-605-000 300 300 305 305
PRODUCT CODE (NOM) DIMENSIONSA B c cuTouT
To coNVErT TWo WAY T-BAr fixTurEs To surfAcE MouNTED (up To 100MM DEpTH)
EL-Acc-609-000 300 300
EL-Acc-610-000 600 300
EL-Acc-611-000 600 600
EL-Acc-612-000 1200 300
PRODUCT CODE (NOM) DIMENSIONSA B c cuTouT
To coNVErT TWo WAY T-BAr fixTurEs To surfAcE MouNTED (up To 150MM DEpTH)
EL-Acc-504-000 1200 300
EL-Acc-509-000 600 300
EL-Acc-510-000 1200 300
EL-Acc-513-000 1200 600
ExAMPLE OF AURORA FITTING WITH PLASTER FRAME
ExAMPLE OF AURORA FITTING WITH PLASTER FRAME
PLAStER FRAMES:
To convert any 2 way t-bar fixtures to plaster
SURFACE MOUNtING kItS:
To convert 2 way t-bar fixtures to surface mounted (up to 100mm depth). Applicable for: Multifive, penta G2, Visionline, Aurora, Vertex
To convert 2 way t-bar fixtures to surface mounted (up to 100mm depth). Applicable for: indigo, Enviro, Enviro Diffused, flexitroffer
www.eaglelighting.com.au 44
< contents
medical
www.eaglelighting.com.au 45
< contents
EPDM GASKET
TECHNICAL INFORMATION
VARIATION SUFFIX
Non DIM/STD terminal block -0
DSI/STD terminal block -1
DALI/STD terminal block -2
Standard/Fused terminal block -4
DSI/Fused terminal block -5
DALI/Fused terminal block -6
Emergency (ATCO maintained) -8
PRODUCT CODE LIGHT SOURCE/DESCRIPTION DIMENSIONSWATTAGE EFFICACY
lm/WLUMINOUS
FLUX A B C CUTOUT
CLEANROOM LED : BOTTOM ACCESS PLASTER RECESSED
EL-CR44L-814000P-_ 1R 2600LM 4k Delta 20 83 1650 1260 315 120 1230 285
EL-CR44L-824000P-_ 2R 5200LM 4k Delta 38.5 83 3187 1260 315 120 1230 285
EL-CR44L-814200P-_ 1R 1300LM 4k Delta 11.7 83 980 660 315 120 630 285
EL-CR44L-824200P-_ 2R 2600LM 4k Delta 20 83 1638 660 315 120 630 285
EL-CR44L-824100P-_ 2R 5200LM 4k Delta 38.5 87 3380 1260 660 120 1230 630
EL-CR44L-834100P-_ 3R 7800LM 4k Delta 58.5 87 5070 1260 660 120 1230 630
EL-CR44L-844100P-_ 4R 10400LM 4k Delta 77.8 87 6760 1260 660 120 1230 630
EL-CR44L-824300P-_ 2R 2600LM 4k Delta 20 85 1690 660 660 120 630 630
EL-CR44L-834300P-_ 3R 3900LM 4k Delta 29.7 85 2535 660 660 120 630 630
EL-CR44L-844300P-_ 4R 5200LM 4k Delta 38.5 85 3345 660 660 120 630 630
The Cleanroom range of fixtures has been developed to meet the requirements of specialist installations, where the luminaire requires protection against contamination.
This range is rated IP44 from all angles.
The Cleanroom IP44 LED fitting is ideal for areas where long running hours and difficult access for maintenance are a concern.
The LED boards employed in the Cleanroom are Zhaga approved and can easily be changed or upgraded by two simple fixing screws. Using Zhaga approved boards ensures future availability and access to the latest developments in efficiency, colour quality and maintenace in the LED market.
Seismic restraint as standard.OPTIONS
+ Sandwich Panel
+ Emergency
+ Colour temperature 3k, 4k or 5k
N18226
CLEANROOM IP44 LEDA range of luminaires developed for specialist ‘cleanroom’ applications
Weight of 1200x300 luminaire is 10.00kg Weight of 600x300 luminaire is 5.55kg Weight of 1200x600 luminaire is 18.20kg Weight of 600x600 luminaire is 10.80kg
PLEASE NOTE: The cutout sizes shown above refer to only these specific product codes and no other Cleanroom products. If you are unsure of the cutout size required for your Cleanroom fitting, please ask your ELA representative.
DIFFUSER PANEL OPTIONS SUFFIX
P19 -1
P5 -2
Delta -8
CEILING TYPE SUFFIX
Plaster -P
Surface mounted -S
T-bar -T
IES INDOOR REPORTPHOTOMETRIC FILENAME : LL16298.IES
POLAR GRAPH
207
414
620
827
1
Maximum Candela = 827.29 Located At Horizontal Angle = 0, Vertical Angle = 0# 1 - Vertical Plane Through Horizontal Angles (0 - 180) (Through Max. Cd.)
Photometric Toolbox Professional Edition - Copyright 2002-2011 by Lighting Analysts, Inc.Calculations based on published IES Methods and recommendations, values rounded for display purposes.Results derived from content of manufacturers photometric file.
Page 1
CLEANROOM IP44 LED 1200x300 2600lm Delta
TECHNICAL SPECIFICATIONS
Total Luminaire Efficacy minimum > 69lm/W
MacAdam 3 SDCM
CRI > 84
Lifetime 50,000hrs / L70
Passive cooling
System guarantee 5 years
EXAMPLE ONLY
CEILING TYPE
COLOUR TEMP WIRING VARIATION
DIFFUSER OPTION
EL-CR44L-814000P-_B
C
A
TOGGLE
LED IP44
www.eaglelighting.com.au 46
< contents
EPDM GaskEt
TECHNICAL INFORMATION
PRODuCT CODE LIGHT sOuRCE/DEsCRIPTION DIMENsIONsWattaGE EFFICaCy
lm/WLUMINOUs
FLUX a B C CUtOUt
CLEaNROOM IP44 CyaNOsIs LED : BOttOM aCCEss PLastER RECEssED
EL-CR44L-82H9000P-_ 2R 10,000LM 4k Delta COI 85.8 57.6 4947 1260 315 120 1230 285
EL-CR44L-82H9200P-_ 2R 5000LM 4k Delta COI 42.9 57.6 2473 660 315 120 630 285
EL-CR44L-84H9300P-_ 4R 9600LM 4k Delta COI 85.8 57.6 4947 660 660 120 630 630
Designed to assist healthcare workers to detect cyanosis and other colour changes in the skin or body tissues, the Cleanroom IP44 Cyanosis LED is COI compliant. (Cyanosis Observation Index 0.69).
the LED boards used in this Cleanroom luminaire emit an increased amount of light between 620 and 700 nanometres compared to standard LED boards. this range of light is optimal for detecting changes in skin tone.
the Cleanroom range of luminaires has been developed to meet the requirements of specialist installations, where the luminaire requires protection against contamination. this range is rated IP44 from all angles.
seismic restraint as standard.OPTiONS
+ sandwich Panel + Emergency + available in 4k colour temperature only
N18226
cleaNROOm iP44 cyaNOSiS ledCOI compliant LED luminaire
Weight of 1200x300 luminaire is 10.00kg Weight of 600x300 luminaire is 5.55kg Weight of 1200x600 luminaire is 18.20kg Weight of 600x600 luminaire is 10.80kg
PleaSe NOTe: the cutout sizes shown above refer to only these specific product codes and no other Cleanroom products. If you are unsure of the cutout size required for your Cleanroom fitting, please ask your ELa representative.
IES INDOOR REPORTPHOTOMETRIC FILENAME : LL16298.IES
POLAR GRAPH
207
414
620
827
1
Maximum Candela = 827.29 Located At Horizontal Angle = 0, Vertical Angle = 0# 1 - Vertical Plane Through Horizontal Angles (0 - 180) (Through Max. Cd.)
Photometric Toolbox Professional Edition - Copyright 2002-2011 by Lighting Analysts, Inc.Calculations based on published IES Methods and recommendations, values rounded for display purposes.Results derived from content of manufacturers photometric file.
Page 1
CLEaNROOM IP44 LED 1200x300 Delta
ExAMPLE ONLy
CEILING TyPE
CyANOsIs LAMP WIRING vARIATION
DIFFusER OPTION
el-cR44l-82H9000P-_B
C
A
tOGGLE
LED IP44
vARIATION suFFIx
Non DIM/stD terminal block -0
DsI/stD terminal block -1
DaLI/stD terminal block -2
standard/Fused terminal block -4
DsI/Fused terminal block -5
DaLI/Fused terminal block -6
Emergency (atCO maintained) -8
DIFFusER PANEL OPTIONs suFFIx
Delta -8
CEILING TyPE suFFIx
Plaster -P
surface mounted -s
t-bar -t
TECHNICAL sPECIFICATIONs
total Luminaire Efficacy minimum > 57lm/W
Macadam 3 sDCM
Colour Rendering Index (Ra) 95
special CRI (R9) 82
Cyanosis Observation Index 0.69
Lifetime 50,000hrs / L70
system guarantee 5 years
www.eaglelighting.com.au 47
< contents
VARIATION SUFFIX
Non DIM/STD terminal block -0
DSI/STD terminal block -1
DALI/STD terminal block -2
Standard/Fused terminal block -4
DSI/Fused terminal block -5
DALI/Fused terminal block -6
Emergency (ATCO maintained) -8
DIFFUSER PANEL OPTIONS SUFFIX
P19 -1
P5 -2
Delta -8
CEILING TYPE SUFFIX
Plaster -P
Surface mounted -S
T-bar -T
TECHNICAL SPECIFICATIONS
Total Luminaire Efficacy minimum > 69lm/W
MacAdam 3 SDCM
CRI > 84
Lifetime 50,000hrs / L70
Passive cooling
System guarantee 5 years
EXAMPLE ONLY
CEILING TYPE
COLOUR TEMP WIRING VARIATION
DIFFUSER OPTION
EL-CR44L-81H4000P-_
EPDM GASKET
TECHNICAL INFORMATION
PRODUCT CODE LIGHT SOURCE/DESCRIPTION DIMENSIONSWATTAGE EFFICACY
lm/WLUMINOUS
FLUX A B C CUTOUT
CLEANROOM LED : BOTTOM ACCESS PLASTER RECESSED
EL-CR44L-81H4000P-_ 1R 5000LM 4k High Output Delta 36 86 3098 1260 315 120 1230 285
EL-CR44L-82H4000P-_ 2R 10000LM 4k High Output Delta 72.2 86 6196 1260 315 120 1230 285
EL-CR44L-81H4200P-_ 1R 2500LM 4k High Output Delta 18.1 86 1560 660 315 120 630 285
EL-CR44L-82H4200P-_ 2R 5000LM 4k High Output Delta 36 86 3098 660 315 120 630 285
EL-CR44L-82H4100P-_ 2R 9600LM 4k High Output Delta 72.2 87 6240 1260 660 120 1230 630
EL-CR44L-83H4100P-_ 3R 14400LM 4k High Output Delta 108.4 86 9360 1260 660 120 1230 630
EL-CR44L-82H4300P-_ 2R 4800LM 4k High Output Delta 36 87 3120 660 660 120 630 630
EL-CR44L-83H4300P-_ 3R 7200LM 4k High Output Delta 54.2 87 4680 660 660 120 630 630
EL-CR44L-84H4300P-_ 4R 9600LM 4k High Output Delta 72.2 87 6240 660 660 120 630 630
CLEANROOM IP44 LED HIGH OUTPUTA range of luminaires developed for specialist ‘cleanroom’ applications
PLEASE NOTE: The cutout sizes shown above refer to only these specific product codes and no other Cleanroom products. If you are unsure of the cutout size required for your Cleanroom fitting, please ask your ELA representative.
CLEANROOM IP44 LED HO 1200x300 5000lm Delta
The Cleanroom range of fixtures has been developed to meet the requirements of specialist installations, where the luminaire requires protection against contamination.
This range is rated IP44 from all angles.
The Cleanroom IP44 LED fitting is ideal for areas where long running hours and difficult access for maintenance are a concern.
The LED boards employed in the Cleanroom are Zhaga approved and can easily be changed or upgraded by two simple fixing screws. Using Zhaga approved boards ensures future availability and access to the latest developments in efficiency, colour quality and maintenace in the LED market.
Seismic restraint as standard.
OPTIONS
+ Sandwich Panel
+ Emergency
+ Colour temperature 3k, 4k or 5kN18226
Weight of 1200x300 luminaire is 10.00kg Weight of 600x300 luminaire is 5.55kg Weight of 1200x600 luminaire is 18.20kg Weight of 600x600 luminaire is 10.80kg
B
C
A
1514
1
2
1135
378
757
TOGGLE
LED IP44
< contents
www.eaglelighting.com.au 48
TECHNICAL INFORMATION
EPDM GaskEt
PRODuCT CODE LIGHT sOuRCE/DEsCRIPTION DIMENsIONsa B C CUtOUt
CLEaNROOM t5 : BOttOM aCCEss GaskEtED PLastER RECEssED
EL-CR44-214-_02P-___ 2 x 14W t5 Plaster Recessed 660 315 120 630 285
EL-CR44-314-_02P-___ 3 x 14W t5 Plaster Recessed 660 315 120 630 285
EL-CR44-224-_02P-___ 2 x 24W t5 Plaster Recessed 660 315 120 630 285
EL-CR44-324-_02P-___ 3 x 24W t5 Plaster Recessed 660 315 120 630 285
EL-CR44-228-_00P-___ 2 x 28W t5 Plaster Recessed 1260 315 120 1230 285
EL-CR44-328-_00P-___ 3 x 28W t5 Plaster Recessed 1260 315 120 1230 285
EL-CR44-254-_00P-___ 2 x 54W t5 Plaster Recessed 1260 315 120 1230 285
EL-CR44-354-_00P-___ 3 x 54W t5 Plaster Recessed 1260 315 120 1230 285
EL-CR44-228-_01P-___ 2 x 28W t5 Plaster Recessed 1260 660 120 1230 630
EL-CR44-328-_01P-___ 3 x 28W t5 Plaster Recessed 1260 660 120 1230 630
EL-CR44-254-_01P-___ 2 x 54W t5 Plaster Recessed 1260 660 120 1230 630
EL-CR44-214-_03P-___ 2 x 14W t5 Plaster Recessed 660 660 120 630 630
EL-CR44-224-_03P-___ 2 x 24W t5 Plaster Recessed 660 660 120 630 630
EL-CR44-414-_03P-___ 4 x 14W t5 Plaster Recessed 660 660 120 630 630
CLEaNROOM 2x28W y19 | LOR >70%
8/
cleaNROOm iP44 T5A range of luminaires developed for specialist ‘cleanroom’ applications
the Cleanroom range of fixtures has been developed to meet the requirements of specialist installations, where the luminaire requires protection against contamination.
this range is rated IP44 from all angles.
suitable for diverse applications such as hospitals, food preparation areas, pharmaceuticals manufacturing areas, fibre optic production areas and applications where a clean environment is required.
a large variety of speciality lamp options are easily available for the Cleanroom IP44 t5 and t8 models, including high colour rendering options, long life versions and cyanosis index approved options.
seismic restraint as standard.
OPTiONS
+ sandwich Panel
+ Emergency
N18226
vARIATION suFFIx
Non DIM/stD terminal block -000
DsI/stD terminal block -100
DaLI/stD terminal block -200
standard/Fused terminal block -400
DsI/Fused terminal block -500
DaLI/Fused terminal block -600
Emergency (atCO maintained) -800
DIFFusER PANEL OPTIONs suFFIx
P19 -1
P5 -2
Delta -8
CEILING TyPE suFFIx
Plaster -P
surface mounted -s
t-bar -t
ExAMPLE ONLy WIRING vARIATIONDIFFusER OPTION
CEILING TyPELAMP TyPE
el-cR44-214-_02P-___
PleaSe NOTe: the cutout sizes shown above refer to only these specific product codes and no other Cleanroom products. If you are unsure of the cutout size required for your Cleanroom fitting, please ask your ELa representative.
Weight of 1200x300 luminaire is 10.00kg Weight of 600x300 luminaire is 5.55kg Weight of 1200x600 luminaire is 18.20kg Weight of 600x600 luminaire is 10.80kg
B
C
A
tOGGLE
IP44
www.eaglelighting.com.au 49
< contents
TECHNICAL INFORMATION
EPDM GaskEt tOGGLE
PRODuCT CODE LIGHT sOuRCE/DEsCRIPTION DIMENsIONsa B C CUtOUt
CLEaNROOM t8 : BOttOM aCCEss GaskEtED PLastER RECEssED
EL-CR44-218-_02P-___ 2 x 18W t8 Plaster Recessed 660 315 120 630 285
EL-CR44-318-_02P-___ 3 x 18W t8 Plaster Recessed 660 315 120 630 285
EL-CR44-236-_00P-___ 2 x 36W t8 Plaster Recessed 1260 315 120 1230 285
EL-CR44-336-_00P-___ 3 x 36W t8 Plaster Recessed 1260 315 120 1230 285
EL-CR44-236-101P-___ 2 x 36W t8 Plaster Recessed 1260 660 120 1230 630
EL-CR44-336-101P-___ 3 x 36W t8 Plaster Recessed 1260 660 120 1230 630
EL-CR44-436-101P-___ 4 x 36W t8 Plaster Recessed 1260 660 120 1230 630
EL-CR44-218-103P-___ 2 x 18W t8 Plaster Recessed 660 660 120 630 630
EL-CR44-318-103P-___ 3 x 18W t8 Plaster Recessed 660 660 120 630 630
EL-CR44-418-103P-___ 4 x 18W t8 Plaster Recessed 660 660 120 630 630
the Cleanroom range of fixtures has been developed to meet the requirements of specialist installations, where the luminaire requires protection against contamination.
this range is rated IP44 from all angles.
suitable for diverse applications such as hospitals, food preparation areas, pharmaceuticals manufacturing areas, fibre optic production areas and applications where a clean environment is required.
a large variety of speciality lamp options are easily available for the Cleanroom IP44 t5 and t8 models, including high colour rendering options, long life versions and cyanosis index approved options.
seismic restraint as standard.
OPTiONS
+ sandwich Panel
+ Emergency
CLEaNROOM 2x36W y19 | LOR >70%
cleaNROOm iP44 T8A range of luminaires developed for specialist ‘cleanroom’ applications
PleaSe NOTe: the cutout sizes shown above refer to only these specific product codes and no other Cleanroom products. If you are unsure of the cutout size required for your Cleanroom fitting, please ask your ELa representative.
Weight of 1200x300 luminaire is 10.00kg Weight of 600x300 luminaire is 5.55kg Weight of 1200x600 luminaire is 18.20kg Weight of 600x600 luminaire is 10.80kg
B
C
A
362
2
91
181
272
1
8/IP44
N18226
vARIATION suFFIx
Non DIM/stD terminal block -000
DsI/stD terminal block -100
DaLI/stD terminal block -200
standard/Fused terminal block -400
DsI/Fused terminal block -500
DaLI/Fused terminal block -600
Emergency (atCO maintained) -800
DIFFusER PANEL OPTIONs suFFIx
P19 -1
P5 -2
Delta -8
CEILING TyPE suFFIx
Plaster -P
surface mounted -s
t-bar -t
ExAMPLE ONLy WIRING vARIATIONDIFFusER OPTION
CEILING TyPELAMP TyPE
el-cR44-218-_02P-___
www.eaglelighting.com.au 50
< contents
cleaNROOm iP54 RaTedA range of luminaires developed for specialist ‘cleanroom’ applications
TECHNICAL INFORMATION
vARIATION suFFIx
standard -000
DsI/stD terminal block -100
DaLI/stD terminal block -200
1-10V/stD terminal block -300
standard/Fused terminal block -400
DsI/Fused terminal block -500
DaLI/Fused terminal block -600
1-10V/Fused terminal block -700
tORsION sPRING
91
182
273
364
1
PRODuCT CODE LIGHT sOuRCE/DEsCRIPTION (NOM) DIMENsIONsa B C
CLEaNROOM t5 : BOttOM aCCEss tRIPLE GaskEt
EL-CCL-214-_03-___ 2 x 14W t5 Plaster Recessed 650 650 120 615 615
EL-CCL-314-_03-___ 3 x 14W t5 Plaster Recessed 650 650 120 615 615
EL-CCL-414-_00-___ 4 x 14W t5 Plaster Recessed 650 650 120 615 615
EL-CCL-228-_00-___ 2 x 28W t5 Plaster Recessed 1275 370 120 1230 340
EL-CCL-328-_00-___ 3 x 28W t5 Plaster Recessed 1275 370 120 1230 340
EL-CCL-235-_00-___ 2 x 35W t5 Plaster Recessed 1575 370 120 1530 340
CLEaNROOM t5 : tOP aCCEss tRIPLE GaskEt
EL-CCL-228-_01-___ 2 x 28W t5 Plaster Recessed 1280 370 120 1230 340
EL-CCL-328-_01-___ 3 x 28W t5 Plaster Recessed 1280 370 120 1230 340
CLEaNROOM t8 : BOttOM aCCEss tRIPLE GaskEt
EL-CCL-236-_00-___ 2 x 36W t8 Plaster Recessed 1275 370 120 1230 340
EL-CCL-336-_00-___ 3 x 36W t8 Plaster Recessed 1275 370 120 1230 340
CLEaNROOM t8 : tOP aCCEss tRIPLE GaskEt
EL-CCL-236-_01-___ 2 x 36W t8 Plaster Recessed 1280 370 120 1230 340
EL-CCL-336-_01-___ 3 x 36W t8 Plaster Recessed 1280 370 120 1230 340
the Cleanroom range of fixtures has been developed to meet the requirements of specialist installations, where a fully sealed luminaire is needed to prevent contamination of the clean environment.
suitable for diverse applications such as hospitals, food preparation areas, pharmaceuticals manufacturing areas, fibre optic production areas and applications where a clean environment is required.
seismic restraint as standard.
OPTiONS
+ Plaster Recessed
+ Exposed t-Bar
+ sandwich Panel
+ Emergency CO D16/ C90 D20 (3x36W Version)
+ surface mounted version available upon request
DIFFusER PANEL OPTIONs suFFIx
P19 -1
P5 -2
P7 -3
Opal -5
P20 -6
CLEaNROOM 2x28W | LOR 76%
N18226
ExAMPLE ONLy
WIRING vARIATION
DIFFusER OPTION
LAMP TyPE
el-ccl-214-_03-___
EPDM GaskEt
B
C
A
PleaSe NOTe: the cutout sizes shown above refer to only these specific product codes and no other Cleanroom products. If you are unsure of the cutout size required for your Cleanroom fitting, please ask your ELa representative.
8/IP54
www.eaglelighting.com.au 51
< contents
cleaNROOm clB iP54 RaTedA range of luminaires developed for specialist ‘cleanroom’ applications
TECHNICAL INFORMATION
vARIATION suFFIx
standard -000
DsI/stD terminal block -100
DaLI/stD terminal block -200
1-10V/stD terminal block -300
standard/Fused terminal block -400
DsI/Fused terminal block -500
DaLI/Fused terminal block -600
1-10V/Fused terminal block -700
the Cleanroom range of fixtures has been developed to meet the requirements of specialist installations, where a fully sealed luminaire is needed to prevent contamination of the clean environment.
Ensuring a clean and secure environment does not negate the need for excellent light control. With the CLB we have incorporated the Penta G2 Miro 5 louvre fixed into the frame for increased luminance and glare control protected by a clear acrylic overlay.
suitable for diverse applications such as hospitals, food preparation areas, pharmaceuticals manufacturing areas, fibre optic production areas and applications where a clean environment is required.seismic restraint as standard.
OPTiONS
+ Plaster Recessed
+ sandwich Panel
+ surface mounted version available upon request
+ t-bar version available upon request
+ Polycarbonate (Ik10)
EPDM GaskEt
97
195
292
390
1
CLEaNROOM CLB 2x28W | LOR 83%
B
C
A
PRODuCT CODE LIGHT sOuRCE/DEsCRIPTION (NOM) DIMENsIONsa B C CUtOUt
CLEaNROOM CLB PLastER RECEssED
EL-CLB-214-100-_00 2 x 14W 670 330 100 620 290
EL-CLB-224-100-_00 2 x 24W 670 330 100 620 290
EL-CLB-314-100-_00 3 x 14W 685 460 100 620 395
EL-CLB-324-100-_00 3 x 24W 685 460 100 620 395
EL-CLB-414-100-_00 4 x 14W 685 575 100 620 510
EL-CLB-424-100-_00 4 x 24W 685 575 100 620 510
EL-CLB-228-100-_00 2 x 28W 1275 330 100 1230 290
EL-CLB-254-100-_00 2 x 54W 1275 330 100 1230 290
N18226
ExAMPLE ONLy
LAMP TyPE WIRING vARIATION
el-clB-214-100-_00
tORsION sPRING
PleaSe NOTe: the cutout sizes shown above refer to only these specific product codes and no other Cleanroom products. If you are unsure of the cutout size required for your Cleanroom fitting, please ask your ELa representative.
IP54 IK10
www.eaglelighting.com.au 52
< contents
SecuReROOm iP65 RaTedA range of luminaires specifically developed for specialist cleanroom and security applications
TECHNICAL INFORMATION
vARIATION suFFIx
standard -000
DsI/stD terminal block -100
DaLI/stD terminal block -200
1-10V/stD terminal block -300
standard/Fused terminal block -400
DsI/Fused terminal block -500
DaLI/Fused terminal block -600
1-10V/Fused terminal block -700
PC2 acrylic panel -P
PRODuCT CODE LIGHT sOuRCE/DEsCRIPTION (NOM) DIMENsIONsa B C
sECUREROOM t5 BOttOM aCCEss tRIPLE GaskEt - PLastER
EL-CCL-214-_04-___ 2 x 14W t5 Plaster Recessed 700 700 120 630 630
EL-CCL-314-_04-___ 3 x 14W t5 Plaster Recessed 700 700 120 630 630
EL-CCL-228-_05-___ 2 x 28W t5 Plaster Recessed 1300 400 120 1230 340
EL-CCL-328-_05-___ 3 x 28W t5 Plaster Recessed 1300 400 120 1230 340
EL-CCL-235-_02-___ 2 x 35W t5 Plaster Recessed 1600 400 120 1530 340
sECUREROOM t8 BOttOM aCCEss tRIPLE GaskEt - PLastER
EL-CCL-418-_05-___ 4 x 18W t8 Plaster Recessed 700 700 120 630 630
EL-CCL-236-_02-___ 2 x 36W t8 Plaster Recessed 1300 400 120 1230 340
EL-CCL-336-_02-___ 3 x 36W t8 Plaster Recessed 1300 400 120 1230 340
NOTe : staNDaRD COMPLEtE WItH POLyCaRBONatE. FOR PC2 ENVIRONMENt, aCRyLIC PaNEL REPLaCEs POLyCaRBONatE (aDD sUFFIX -P)
EPDM GaskEttaMPERPROOF sCREW
91
182
273
364
1
the Cleanroom security range of fixtures has been developed to meet the requirements of specialist installations, where a fully sealed luminaire is needed to prevent contamination of the secure environment.
suitable for diverse applications such PC2 laboratories, hospitals, psychiatric wards, police stations, high security, pharmaceutical manufacturing areas and applications where a clean and secure environment is required.
seismic Restraint as standard.
OPTiONS
+ sandwich Panel
+ Emergency CO D16 / C90 D20 (3x36W Version)
+ surface mounted available upon request
+ t-bar available upon request
+ PC2 Environments
DIFFusER PANEL OPTIONs suFFIx
P19 -1
P5 -2
P7 -3
Opal -5
P20 -6
sECUREROOM 2x28W | LOR 76%
B
C
A
N18226
ExAMPLE ONLy
WIRING vARIATIONLAMP TyPE
DIFFusER OPTION
el-ccl-214-_04-___
PleaSe NOTe: the cutout sizes shown above refer to only these specific product codes and no other Cleanroom products. If you are unsure of the cutout size required for your Cleanroom fitting, please ask your ELa representative.
IP65 IK10
www.eaglelighting.com.au 53
< contents
SecuReROOm SlB iP65 RaTedA range of luminaires specifically developed for specialist cleanroom and security applications
TECHNICAL INFORMATION
vARIATION suFFIx
standard -000
DsI/stD terminal block -100
DaLI/stD terminal block -200
1-10V/stD terminal block -300
standard/Fused terminal block -400
DsI/Fused terminal block -500
DaLI/Fused terminal block -600
1-10V/Fused terminal block -700
PC2 acrylic panel -P
EPDM GaskEttaMPERPROOF sCREW
the Cleanroom security range of fixtures has been developed to meet the requirements of specialist installations, where a fully sealed luminaire is needed to prevent contamination of the secure environment.
Having a clean and secure environment does not negate the need for excellent light control. With secureroom sLB we have incorporated the Penta G2 Miro 5 louvre fixed into the frame for increased luminance and glare control.
suitable for diverse applications such PC2 laboratories, hospitals, psychiatric wards, police stations, high security, pharmaceutical manufacturing areas and applications where a clean and secure environment is required.
seismic restraint as standard.
OPTiONS
+ sandwich Panel
+ surface mounted available upon request
+ t-bar available upon request
+ PC2 environments
97
195
292
390
1
sECUREROOM sLB 2x28W | LOR 83%
B
C
A
PRODuCT CODE LIGHT sOuRCE/DEsCRIPTION (NOM) DIMENsIONsa B C
sECUREROOM sLB PLastER RECEssED
EL-sLB-214-100-_00 2 x 14W 685 355 100 620 290
EL-sLB-224-100-_00 2 x 24W 685 355 100 620 290
EL-sLB-314-100-_00 3 x 14W 685 460 100 620 395
EL-sLB-324-100-_00 3 x 24W 685 460 100 620 395
EL-sLB-414-100-_00 4 x 14W 685 575 100 620 510
EL-sLB-424-100-_00 4 x 24W 685 575 100 620 510
EL-sLB-228-100-_00 2 x 28W 1300 355 100 1230 290
EL-sLB-254-100-_00 2 x 54W 1300 355 100 1230 290
NOTe : staNDaRD COMPLEtE WItH POLyCaRBONatE. FOR PC2 ENVIRONMENt, aCRyLIC PaNEL REPLaCEs POLyCaRBONatE (aDD sUFFIX -P)
N18226
ExAMPLE ONLy
WIRING vARIATIONLAMP TyPE
el-SlB-214-100-_00
PleaSe NOTe: the cutout sizes shown above refer to only these specific product codes and no other Cleanroom products. If you are unsure of the cutout size required for your Cleanroom fitting, please ask your ELa representative.
IP65 IK10
www.eaglelighting.com.au 54
< contents
OPeRaTiNg THeaTRe ligHT A range of luminaires specifically developed for operating theatre applications
WIRING vARIATION suFFIx
standard -000
DsI/stD terminal block -100
DaLI/stD terminal block -200
1-10V/stD terminal block -300
standard/Fused terminal block -400
DsI/Fused terminal block -500
DaLI/Fused terminal block -600
1-10V/Fused terminal block -700
Our Operating theatre Light luminaires have been developed as a unique solution, meeting the requirements of specialist operating theatre installations, where a fully sealed luminaire is needed to prevent contamination of the secure environment.
this range has been engineered specifically for hospitals, emergency and veterinarian operating theatres.
OPTIONs:
+ available in an IP44 Cleanroom, or IP54 secureroom configuration, with bottom or ceiling access.
+ t5 or t8 lamp options in single or multiple configurations.
+ Operating theatre Light can be installed with separate switching/dimming depending on requirements.
DIFFusER PANEL OPTIONs suFFIx
P19 -100
P5 -200
P7 -300
Opal -500
P20 -600
TECHNICAL INFORMATION
B
C
A
N18226
PRODuCT CODE LIGHT sOuRCE/DEsCRIPTION (NOM) DIMENsIONs†
a B C
OPERatING tHEatRE LIGHt - BOttOM aCCEss, tRIPLE GaskEt - PLastER RECEssED
EL-OPs-228-_00-000* CORNER a IP65 1270† 380† 135†
EL-OPs-228-_01-000* CORNER B IP65 1270† 380† 135†
EL-OPs-228-_02-000* INtERMEDIatE IP65 1270† 380† 135†
EL-OPs-228-_03-000* INtERMEDIatE W/ CEILING aCCEss IP65 1270† 380† 135†
EL-OPs-228-_04-000* staRt IP65 1270† 380† 135†
EL-OPs-228-_05-000* END IP65 1270† 380† 135†
*PRODUCt CODEs aND †DIMENsIONs LIstED aRE EXaMPLEs aND aPPLy tO 2 X 28W LaMP CONFIGURatION ONLy
the Operating theatre Light can be customised to your needs. Please consult with an ELa Representative regarding dimensions and product codes.
the Operating theatre Light is available in the following lamp configurations:
t5 Lamp 14W 24W 28W 35W 49W 54W single or Multiple Lamps
t8 Lamp 18W 36W 58W single or Multiple Lamps
UNIqUE OVERLaPPING DEsIGN EPDM GaskEt & INstaLLatION BRaCkEts
OPERatING tHEatRE 2x28W | LOR 76%
91
182
273
364
1
EL-OPS-228-_00-000WIRING vARIATIONExAMPLE ONLy
DIFFusER OPTIONsLAMP CONFIGuRATION
8/ 6544
PleaSe NOTe: Please ask your ELa representative for cutout sizes.
www.eaglelighting.com.au 55
< contents
OPeRaTiNg THeaTRe ligHT A range of luminaires specifically developed for operating theatre applications
FEATuREs & bENEFITs
ExAMPLE LAyOuTs adapted from our highly successful Cleanroom and secureroom range of luminaires, the Operating theatre Light has been specifically developed to meet the demanding requirements of the theatre environment.
FEATuREs AND bENEFITs:
+ together with an EPDM gasket, swing-out installation brackets negate the need for a silicon sealant around the fixture in the ceiling. EPDM rubber foam is a closed cell gasket, ensuring a high IP-rating. at less than 10% compression this returns a 100% water tightness. the low-memory nature of the material ensures it will always return to its original shape.
+ Overlapping design construction, provides this system with a continuous seal around the perimeter of the installation.
+ UV-stablised, acrylic diffuser options contribute to the overall IP65-rating, and are easily cleaned and maintained. When compared with polycarbonate options, our acrylic diffuser is resistant to hospital-grade cleaners.
+ By combining the acrylic diffuser with the multi-directional IP-rating of the Operating theatre Light, the result is a luminaire that meets the tough standards required for a PC2 environment.
+ One of the features of meeting the PC2 standard is that zero contaminants can enter the luminaire - including from inside the ceiling cavity. this means the luminaire achieves high maintenance intervals.
+ a removeable gear tray allows for easy installation and maintenance.
Designed and manufactured in Melbourne, australia, the Operating theatre Light has many unique features and capabilities, but most importantly offers a diverse range of options to suit applications with different constraints and requirements. Consult with your local ELa Representative to discuss your needs.
the above example layouts demonstrate how the Operating theatre Light system can be installed to create a fully sealed, contaminant-free environment. Example a. demonstrates a full theatre installation, utilising Corner modules, Example B. shows a single run making use of start and End modules.
2 2
0
1
eXamPle a. eXamPle B.
ITEM NO.
DEsCRIPTION QTy
0 CORNER A 2
1 CORNER b 2
2 INTERMEDIATE 10
ITEM NO.
DEsCRIPTION QTy
2 INTERMEDIATE 2
4 sTART 1
5 END 1
1 4
0 5
www.eaglelighting.com.au 56
< contents
TECHNICAL INFORMATION
vARIATION suFFIx
standard -000
DsI/stD terminal block -100
DaLI/stD terminal block -200
1-10V/stD terminal block -300
standard/Fused terminal block -400
DsI/Fused terminal block -500
DaLI/Fused terminal block -600
1-10V/Fused terminal block -700
sWINGING LaMP HOLDER FOR LaMP REPLaCEMENt
N18226
Recessed mounted IP44 asymmetric wall washer luminaire suitable for t-Bar ceilings. the lamp is concealed in the luminaire and hidden from view.
asymmetrical light distribution for lighting vertical surfaces, the light sources lamp holder is pivoted so that the source can be moved into the light opening to facilitate re-lamping.
acrylic dust proof cover for ease of cleaning.
OPTiONS
+ Plaster and surface mounted kits availableGONDOL 1x28W | LOR 80%
gONdOl iP44 RaTed A wall washing T-bar luminaire complete with sealed gasket and clear acrylic cover.
C
B
A
DIaGRaM OF WaLLWasHING EFFECt
IP44
PRODuCT CODE LIGHT sOuRCE/DEsCRIPTION (NOM) DIMENsIONsa B C CUtOUt
GONDOL EXPOsED t-BaR
EL-17631-100 1 x 28W t5 1200 300 75
tO CONVERt tHE GONDOL t-BaR tO PLastER
EL-aCC-602-000 Plaster mounting kit 1200 300 1205 310
www.eaglelighting.com.au 57
< contents
FlOReNce eliTe Low profile IP40 direct/indirect bedhead luminaire.
PROducT cOde ligHT SOuRce/deScRiPTiON (NOM) DIMENsIONsa B C
FLORENCE ELItE
WH-FEL3921 1 x 39W UP/1 X 21W DOWN t5 895 213 95
WH-FEy2415 LED 2400 LUMENs UP/1500 LUMENs DOWN (DaLI)
895 213 95
TecHNical iNFORmaTiON
Direct/indirect wall mounted hospital bed head luminaire using LED or t5 light source with separately switched dimmable ward lighting and reading/nursing care light. Easy to clean, IP40 rated extruded aluminium body with one piece infection control diffuser membrane.
Uplight – wide integrated reflectors to maximse efficiency
Downlight – Nano prism diffuser for maximum patient comfort
Medium power LEDs deliver 50,000hrs life to L70.
Both the ward and reading light sources are independently dimmable by “push control” so the following lighting levels can be selected to meet the following requirements:
LED version requires DaLI controls and onsite commissioning
N18226
C A
B
DIMENS IONS
L W H KG
895 213 95 5.0
tyPICaL 4 BED WaRD Vs tyPICaL 1 BED WaRD
IP40
www.eaglelighting.com.au 58
< contents
1200X300 INDIGO HyGIENE BEta LOUVRE
TECHNICAL INFORMATION
iNdigO HygieNeOur popular Indigo Combo beta luminaire complete with a clear wipe down frame
the Indigo Hygiene has been developed with an easily removable clear frame, ideal for medical, healthcare and food preparation environments.
the use of acrylic as the surface material of the frame ensures the Indigo Hygiene’s suitability for environments where chemical cleaning may be required, as well as ensuring a minimal impact on the fitting’s performance.
the uncomplicated and clean recessed design, combined with high efficiency and technical performance allows Indigo Hygiene to create comfortable environments by reducing cavernous effects.
Indigo Hygiene is available in square or rectangular designs and in two sizes with one or two louvre cells with up to four light sources. the active Beta louvre can be combined with an indirect light distribution in the luminaire’s secondary reflector.
In addition, the luminaire’s lined diffuser can be finished in several different colours, offering a decorative indirect light, for exciting and distinctive environments.
N18226
PRODuCT CODE LIGHT sOuRCE/DEsCRIPTION (NOM) DIMENsIONsa B C D CUtOUt
INDIGO HyGIENE EXPOsED t-BaR
EL-24852-214-___-H 2x14W t5 600 300 120 5
EL-24864-224-___-H 2x24W t5 600 600 120 5
EL-24871-128-___-H 1x28W t5 1200 300 120 5
EL-24856-228-___-H 2x28W t5 1200 300 120 5
EL-24857-154-___-H 1x54W t5 1200 300 120 5
EL-24873-154-___-H 1x54W t5 1200 600 120 5
EL-24874-254-___-H 2x54W t5 1200 300 120 5
aCCEssORIEs
EL-aCC-600-000 Plaster Frame 600 300 102 605 310
EL-aCC-601-000 Plaster Frame 600 600 93 605 605
EL-aCC-602-000 Plaster Frame 1200 300 102 1205 310
EL-aCC-603-000 Plaster Frame 1205 600 93 1205 605
EL-aCC-582-000 Installation suction cup
vARIATION suFFIx
standard -0
DsI/stD terminal block -1
DaLI/stD terminal block -2
standard/Fused terminal block -4
DsI/Fused terminal block -5
DaLI/Fused terminal block -6
A
C
B
ENVIRO DIFFUSED HYGIENE
PRODUCT CODE LIGHT SOURCE/DESCRIPTION (NOM) DIMENSIONS
A B C CUTOUTEL-EDH-114-_00-___ 1x14W T5 600 300 120EL-EDH-114-_02-___ 1x14W T5 600 600 120EL-EDH-214-_00-___ 2x14W T5 600 300 120EL-EDH-214-_02-___ 2x14W T5 600 600 120EL-EDH-124-_00-___ 1x24W T5 600 300 120EL-EDH-124-_02-___ 1x24W T5 600 600 120EL-EDH-224-_00-___ 2x24W T5 600 300 120EL-EDH-224-_02-___ 2x24W T5 600 600 120EL-EDH-128-_00-___ 1x28W T5 1200 300 120EL-EDH-128-_02-___ 1x28W T5 1200 600 120EL-EDH-228-_00-___ 2x28W T5 1200 300 120EL-EDH-228-_02-___ 2x28W T5 1200 600 120EL-EDH-154-_00-___ 1x54W T5 1200 300 120EL-EDH-154-_02-___ 1x54W T5 1200 600 120EL-EDH-254-_00-___ 2x54W T5 1200 300 120EL-EDH-254-_02-___ 2x54W T5 1200 600 120
ACCESSORIES A B C CUTOUTEL-ACC-600-000 PLASTER FRAME 600 300 102 605 310EL-ACC-601-000 PLASTER FRAME 600 600 93 605 605EL-ACC-602-000 PLASTER FRAME 1200 300 102 1205 310EL-ACC-603-000 PLASTER FRAME 1205 600 93 1205 605
DIFFUSERSY5 -2
DELTA -8
VARIATION SUFFIXSTANDARD -000
DSI/STD TERMINAL BLOCK -100DALI/STD TERMINAL BLOCK -200
STANDARD/FTB -400DSI/FUSED TERMINAL BLOCK -500
DALI/FUSED TERMINAL BLOCK -600
AVAILABLE OPTIONSAS PER ENVIRO DIFFUSED DATA SHEET
A
C
B
B
D
ENVIRO DIFFUSED HYGIENE
PRODUCT CODE LIGHT SOURCE/DESCRIPTION (NOM) DIMENSIONS
A B CUTOUTEL-EDH-114-_00-___ 1x14W T5 600 300EL-EDH-114-_02-___ 1x14W T5 600 600EL-EDH-214-_00-___ 2x14W T5 600 300EL-EDH-214-_02-___ 2x14W T5 600 600EL-EDH-124-_00-___ 1x24W T5 600 300EL-EDH-124-_02-___ 1x24W T5 600 600EL-EDH-224-_00-___ 2x24W T5 600 300EL-EDH-224-_02-___ 2x24W T5 600 600EL-EDH-128-_00-___ 1x28W T5 1200 300EL-EDH-128-_02-___ 1x28W T5 1200 600EL-EDH-228-_00-___ 2x28W T5 1200 300EL-EDH-228-_02-___ 2x28W T5 1200 600EL-EDH-154-_00-___ 1x54W T5 1200 300EL-EDH-154-_02-___ 1x54W T5 1200 600EL-EDH-254-_00-___ 2x54W T5 1200 300EL-EDH-254-_02-___ 2x54W T5 1200 600
ACCESSORIES A B CUTOUTEL-ACC-600-000 PLASTER FRAME 600 300 605EL-ACC-601-000 PLASTER FRAME 600 600 605EL-ACC-602-000 PLASTER FRAME 1200 300 1205EL-ACC-603-000 PLASTER FRAME 1205 600 1205
DIFFUSERSY5 -2
DELTA -8
VARIATION SUFFIXSTANDARD -000
DSI/STD TERMINAL BLOCK -100DALI/STD TERMINAL BLOCK -200
STANDARD/FTB -400DSI/FUSED TERMINAL BLOCK -500
DALI/FUSED TERMINAL BLOCK -600
AVAILABLE OPTIONSAS PER ENVIRO DIFFUSED DATA SHEET
IP44IP20
www.eaglelighting.com.au 59
< contents
eNviRO HygieNeThe Enviro Hygiene provides pleasing, high visual comfort in environments where hygiene is paramount
1200X300 ENVIRO HyGIENE
TECHNICAL INFORMATION
vARIATION suFFIx
standard -000
DsI/stD terminal block -100
DaLI/stD terminal block -200
standard/Fused terminal block -400
DsI/Fused terminal block -500
DaLI/Fused terminal block -600
PRODuCT CODE LIGHT sOuRCE/DEsCRIPTION (NOM) DIMENsIONsa B C D CUtOUt
ENVIRO HyGIENE EXPOsED t-BaR
EL-ENH-114-100-___ 1 x 14W t5 600 300 120 5
EL-ENH-114-102-___ 1 x 14W t5 600 600 120 5
EL-ENH-214-100-___ 2 x 14W t5 600 300 120 5
EL-ENH-214-102-___ 2 x 14W t5 600 600 120 5
EL-ENH-124-100-___ 1 x 24W t5 600 300 120 5
EL-ENH-124-102-___ 1 x 24W t5 600 600 120 5
EL-ENH-224-102-___ 2 x 24W t5 600 600 120 5
EL-ENH-128-100-___ 1 x 28W t5 1200 300 120 5
EL-ENH-128-102-___ 1 x 28W t5 1200 600 120 5
EL-ENH-228-100-___ 2 x 28W t5 1200 300 120 5
EL-ENH-228-102-___ 2 x 28W t5 1200 600 120 5
aCCEssORIEs
EL-aCC-600-000 Plaster frame 600 300 102 605 310
EL-aCC-601-000 Plaster frame 600 600 93 605 605
EL-aCC-602-000 Plaster frame 1200 300 102 1205 310
EL-aCC-603-000 Plaster frame 1205 600 93 1205 605
EL-aCC-582-000 Installation suction cup
the Enviro Hygiene has been developed with an easily removable clear frame, ideal for medical, healthcare and food preparation environments.
the use of acrylic as the surface material of the frame ensures the Enviro Hygiene’s suitability for environments where chemical cleaning may be required, as well as ensuring a minimal impact on the fitting’s performance.
the Enviro Hygiene features an optical system that greatly reduces contrast brightness thereby providing high visual comfort.
this is achieved by employing a two part optical system comprising of a curved transitional textured Mannex white reflector and a perforated mesh baffle with opal inlay.
Enviro greatly reduces gloomy ‘cavern effect’ interiors by distributing high vertical levels to the walls whilst creating the illusion of a bright ceiling. suitable for t5 lamps and available in 300mm and 600mm module widths.
a hinged basket is fitted to allow for easy lamp replacement.
N18226
A
C
B
ENVIRO DIFFUSED HYGIENE
PRODUCT CODE LIGHT SOURCE/DESCRIPTION (NOM) DIMENSIONS
A B C CUTOUTEL-EDH-114-_00-___ 1x14W T5 600 300 120EL-EDH-114-_02-___ 1x14W T5 600 600 120EL-EDH-214-_00-___ 2x14W T5 600 300 120EL-EDH-214-_02-___ 2x14W T5 600 600 120EL-EDH-124-_00-___ 1x24W T5 600 300 120EL-EDH-124-_02-___ 1x24W T5 600 600 120EL-EDH-224-_00-___ 2x24W T5 600 300 120EL-EDH-224-_02-___ 2x24W T5 600 600 120EL-EDH-128-_00-___ 1x28W T5 1200 300 120EL-EDH-128-_02-___ 1x28W T5 1200 600 120EL-EDH-228-_00-___ 2x28W T5 1200 300 120EL-EDH-228-_02-___ 2x28W T5 1200 600 120EL-EDH-154-_00-___ 1x54W T5 1200 300 120EL-EDH-154-_02-___ 1x54W T5 1200 600 120EL-EDH-254-_00-___ 2x54W T5 1200 300 120EL-EDH-254-_02-___ 2x54W T5 1200 600 120
ACCESSORIES A B C CUTOUTEL-ACC-600-000 PLASTER FRAME 600 300 102 605 310EL-ACC-601-000 PLASTER FRAME 600 600 93 605 605EL-ACC-602-000 PLASTER FRAME 1200 300 102 1205 310EL-ACC-603-000 PLASTER FRAME 1205 600 93 1205 605
DIFFUSERSY5 -2
DELTA -8
VARIATION SUFFIXSTANDARD -000
DSI/STD TERMINAL BLOCK -100DALI/STD TERMINAL BLOCK -200
STANDARD/FTB -400DSI/FUSED TERMINAL BLOCK -500
DALI/FUSED TERMINAL BLOCK -600
AVAILABLE OPTIONSAS PER ENVIRO DIFFUSED DATA SHEET
A
C
B
B
D
ENVIRO DIFFUSED HYGIENE
PRODUCT CODE LIGHT SOURCE/DESCRIPTION (NOM) DIMENSIONS
A B CUTOUTEL-EDH-114-_00-___ 1x14W T5 600 300EL-EDH-114-_02-___ 1x14W T5 600 600EL-EDH-214-_00-___ 2x14W T5 600 300EL-EDH-214-_02-___ 2x14W T5 600 600EL-EDH-124-_00-___ 1x24W T5 600 300EL-EDH-124-_02-___ 1x24W T5 600 600EL-EDH-224-_00-___ 2x24W T5 600 300EL-EDH-224-_02-___ 2x24W T5 600 600EL-EDH-128-_00-___ 1x28W T5 1200 300EL-EDH-128-_02-___ 1x28W T5 1200 600EL-EDH-228-_00-___ 2x28W T5 1200 300EL-EDH-228-_02-___ 2x28W T5 1200 600EL-EDH-154-_00-___ 1x54W T5 1200 300EL-EDH-154-_02-___ 1x54W T5 1200 600EL-EDH-254-_00-___ 2x54W T5 1200 300EL-EDH-254-_02-___ 2x54W T5 1200 600
ACCESSORIES A B CUTOUTEL-ACC-600-000 PLASTER FRAME 600 300 605EL-ACC-601-000 PLASTER FRAME 600 600 605EL-ACC-602-000 PLASTER FRAME 1200 300 1205EL-ACC-603-000 PLASTER FRAME 1205 600 1205
DIFFUSERSY5 -2
DELTA -8
VARIATION SUFFIXSTANDARD -000
DSI/STD TERMINAL BLOCK -100DALI/STD TERMINAL BLOCK -200
STANDARD/FTB -400DSI/FUSED TERMINAL BLOCK -500
DALI/FUSED TERMINAL BLOCK -600
AVAILABLE OPTIONSAS PER ENVIRO DIFFUSED DATA SHEET
IP44IP20
www.eaglelighting.com.au 60
< contents
eNviRO diFFuSed HygieNeEnviro Diffused Hygiene provides pleasing, high visual comfort in environments where hygiene is paramount
1200X300 ENVIRO DIFFUsED HyGIENE
TECHNICAL INFORMATION
vARIATION suFFIx
standard -000
DsI/stD terminal block -100
DaLI/stD terminal block -200
standard/Fused terminal block -400
DsI/Fused terminal block -500
DaLI/Fused terminal block -600
PRODuCT CODE LIGHT sOuRCE/DEsCRIPTION (NOM) DIMENsIONsa B C D CUtOUt
ENVIRO DIFFUsED HyGIENE EXPOsED t-BaR
EL-EDH-114-_00-___ 1x14W t5 600 300 120 5
EL-EDH-114-_02-___ 1x14W t5 600 600 120 5
EL-EDH-214-_02-___ 2x14W t5 600 600 120 5
EL-EDH-224-_02-___ 2x24W t5 600 600 120 5
EL-EDH-128-_00-___ 1x28W t5 1200 300 120 5
EL-EDH-228-_02-___ 2x28W t5 1200 600 120 5
EL-EDH-154-_00-___ 1x54W t5 1200 300 120 5
aCCEssORIEs
EL-aCC-600-000 Plaster frame 600 300 102 605 310
EL-aCC-601-000 Plaster frame 600 600 93 605 605
EL-aCC-602-000 Plaster frame 1200 300 102 1205 310
EL-aCC-603-000 Plaster frame 1205 600 93 1205 605
EL-aCC-582-000 Installation suction cup
the Enviro Diffused Hygiene has been developed with an easily removable clear frame, ideal for medical, healthcare and food preparation environments.
the use of acrylic as the surface material of the frame ensures the Enviro Diffused Hygiene’s suitability for environments where chemical cleaning may be required, as well as ensuring a minimal impact on the fitting’s performance.
the Enviro Diffused Hygiene is a luminaire that has unique collaboration between an active secondary gull reflector system and primary diffuser technology.
the diffuser provides an effective working light while the secondary gull reflector enhances balance between the luminous contrast of the luminaire and other surfaces within the room.
N18226
DIFFusER PANEL OPTIONs suFFIx
P5 -2
Delta -8
A
C
B
ENVIRO DIFFUSED HYGIENE
PRODUCT CODE LIGHT SOURCE/DESCRIPTION (NOM) DIMENSIONS
A B C CUTOUTEL-EDH-114-_00-___ 1x14W T5 600 300 120EL-EDH-114-_02-___ 1x14W T5 600 600 120EL-EDH-214-_00-___ 2x14W T5 600 300 120EL-EDH-214-_02-___ 2x14W T5 600 600 120EL-EDH-124-_00-___ 1x24W T5 600 300 120EL-EDH-124-_02-___ 1x24W T5 600 600 120EL-EDH-224-_00-___ 2x24W T5 600 300 120EL-EDH-224-_02-___ 2x24W T5 600 600 120EL-EDH-128-_00-___ 1x28W T5 1200 300 120EL-EDH-128-_02-___ 1x28W T5 1200 600 120EL-EDH-228-_00-___ 2x28W T5 1200 300 120EL-EDH-228-_02-___ 2x28W T5 1200 600 120EL-EDH-154-_00-___ 1x54W T5 1200 300 120EL-EDH-154-_02-___ 1x54W T5 1200 600 120EL-EDH-254-_00-___ 2x54W T5 1200 300 120EL-EDH-254-_02-___ 2x54W T5 1200 600 120
ACCESSORIES A B C CUTOUTEL-ACC-600-000 PLASTER FRAME 600 300 102 605 310EL-ACC-601-000 PLASTER FRAME 600 600 93 605 605EL-ACC-602-000 PLASTER FRAME 1200 300 102 1205 310EL-ACC-603-000 PLASTER FRAME 1205 600 93 1205 605
DIFFUSERSY5 -2
DELTA -8
VARIATION SUFFIXSTANDARD -000
DSI/STD TERMINAL BLOCK -100DALI/STD TERMINAL BLOCK -200
STANDARD/FTB -400DSI/FUSED TERMINAL BLOCK -500
DALI/FUSED TERMINAL BLOCK -600
AVAILABLE OPTIONSAS PER ENVIRO DIFFUSED DATA SHEET
A
C
B
B
D
ENVIRO DIFFUSED HYGIENE
PRODUCT CODE LIGHT SOURCE/DESCRIPTION (NOM) DIMENSIONS
A B CUTOUTEL-EDH-114-_00-___ 1x14W T5 600 300EL-EDH-114-_02-___ 1x14W T5 600 600EL-EDH-214-_00-___ 2x14W T5 600 300EL-EDH-214-_02-___ 2x14W T5 600 600EL-EDH-124-_00-___ 1x24W T5 600 300EL-EDH-124-_02-___ 1x24W T5 600 600EL-EDH-224-_00-___ 2x24W T5 600 300EL-EDH-224-_02-___ 2x24W T5 600 600EL-EDH-128-_00-___ 1x28W T5 1200 300EL-EDH-128-_02-___ 1x28W T5 1200 600EL-EDH-228-_00-___ 2x28W T5 1200 300EL-EDH-228-_02-___ 2x28W T5 1200 600EL-EDH-154-_00-___ 1x54W T5 1200 300EL-EDH-154-_02-___ 1x54W T5 1200 600EL-EDH-254-_00-___ 2x54W T5 1200 300EL-EDH-254-_02-___ 2x54W T5 1200 600
ACCESSORIES A B CUTOUTEL-ACC-600-000 PLASTER FRAME 600 300 605EL-ACC-601-000 PLASTER FRAME 600 600 605EL-ACC-602-000 PLASTER FRAME 1200 300 1205EL-ACC-603-000 PLASTER FRAME 1205 600 1205
DIFFUSERSY5 -2
DELTA -8
VARIATION SUFFIXSTANDARD -000
DSI/STD TERMINAL BLOCK -100DALI/STD TERMINAL BLOCK -200
STANDARD/FTB -400DSI/FUSED TERMINAL BLOCK -500
DALI/FUSED TERMINAL BLOCK -600
AVAILABLE OPTIONSAS PER ENVIRO DIFFUSED DATA SHEET
IP44IP20
www.eaglelighting.com.au 61
< contents
auReled viSTaA slimline LED luminaire with a printed acrylic diffuser suitable for recessed mounting and T-bar ceilings.
the aureled Vista has been developed with healthcare enivronments in mind. the aureled Vista is available with a range of different imagery designed to promote a relaxing and reassuring environment for patients.
Using creative lighting solutions creates a non-institutional feel that puts patients at ease and makes it more likely that they relax and focus on healing.
the aureled Vista can be a focal and discussion point for young children undergoing medical examinations. By giving patients something to concerntrate on they are less likely to become agitated.
Designed and constructed with a shallow 45mm profile the aureled will slide into confined spaces. Coupled with a detachable gearbox incorporating a plug-and-play connector this luminaire is the perfect solution for locations where there are multiple services installed inside the ceiling space.
Once installed, the gearbox can be detached from the luminaire housing as required whether for upgrading to dimming or maintenance.
Available with:+ DsI Dimming+ DaLI Dimming+ Emergency+ Colour temperature 4k
N18226
(REMOtE GEaR)
PRODuCT CODE LIGHT sOuRCE/DEsCRIPTION (NOM) DIMENsIONsa B C D
aURELED VIsta EXPOsED t-BaR
EL-aUR-____-C1-___ aureled LED C1 600 600 45 40
EL-aUR-____-C2-___ aureled LED C2 600 1200 45 40
EL-aUR-____-C3-___ aureled LED C3 600 1800 45 40
EL-aUR-____-C4-___ aureled LED C4 1200 1200 45 40
EL-aUR-____-C6-___ aureled LED C6 1200 1800 45 40
EL-aUR-____-C9-___ aureled LED C9 1800 1800 45 40
(REMOtE GEaR)
aUtUMN 1 (aUt1)
GaLaXy 1 (GaL1)
sky 1 (sky1)
OCEaN 1 (OCE1)
BUttERFLy 1 (BUt1)
sky 2 (sky2)
AvAILAbLE CONFIGuRATIONs
C1 C2 C3 C4 C6 C9
ExAMPLE ONLy
CONFIGuRATION
WIRING vARIATION
IMAGE OPTION
el-auR-auT1-c9-000
WIRING vARIATION suFFIx
standard -000
DsI/stD terminal block -100
DaLI/stD terminal block -200
standard/Fused terminal block -400
DsI/Fused terminal block -500
DaLI/Fused terminal block -600
PleaSe NOTe: If you would like to use an alternative image or an alternative configuration, please inform us and we will provide you with the required image specifications.
P.O.a
LED IP44
www.eaglelighting.com.au 64
< contents
suspended system
www.eaglelighting.com.au 65
< contents
unO UNO BETA DIRECT
TECHNICAL INFORMATION
vARIATION suFFIx
Standard -000
DSI/STD terminal block -100
DALI/STD terminal block -200
Standard/Fused terminal block -400
DSI/Fused terminal block -500
DALI/Fused terminal block -600
COLOuR vARIATION suFFIx
White -0
Grey -1
Black -2
PRODuCT CODE LIGHT sOuRCE/DEsCRIPTION (NOM) DIMENsIONsA B C
sInGLe mOduLe InstALLAtIOn dIReCt
EL-UNB-114-10_-___ 1 x 14W 680 150 85
EL-UNB-128-10_-___ 1 x 28W 1280 150 85
EL-UNB-135-10_-___ 1 x 35W 1580 150 85
EL-UNB-214-10_-___ 2 x 14W 680 150 85
EL-UNB-228-10_-___ 2 x 28W 1280 150 85
EL-UNB-235-10_-___ 2 x 35W 1580 150 85
tAndem mOduLe InstALLAtIOn dIReCt
EL-UNB-228-30_-___ 2 x 1 x 28W 2560 150 85
EL-UNB-235-30_-___ 2 x 1 x 35W 3160 150 85
tAndem mOduLe LAmps-InFILL InstALLAtIOn dIReCt
EL-UNB-128-50_-___ 1 x 28W 2560 150 85
EL-UNB-135-50_-___ 1 x 35W 3160 150 85
EL-UNB-228-50_-___ 2 x 28W 2560 150 85
EL-UNB-235-50_-___ 2 x 35W 3160 150 85
ACCessORIes
PLEASE SEE PAGE 42 FOR ACCESSORIES
A
A
A
B
C
Uno Direct with Fagerhult’s R5 Beta louvre is available in single or tandem modules. With a LOR 91%, the Uno Direct is an efficient lighting system that will save time and money.
The luminaire body of extruded aluminium is available in three standard colours, textured Mannex black, white or grey.
Through wiring is standard on all models, connection is made via a three or five way terminal block at each end. A joining kit is required for continuous mounting, refer to the accessories.
OptIOns
+ Organic Response Enabled
INTERCONNECTING ASSEMBLy BRACkET
TANDEM MODULE LAMPS-INFILL INSTALLATION DIRECT
TANDEM MODULE INSTALLATION DIRECT
N18226
IP20
www.eaglelighting.com.au 66
< contents
unOUNO BETA DIRECT/INDIRECT
TECHNICAL INFORMATION
vARIATION suFFIx
Standard -000
DSI/STD terminal block -100
DALI/STD terminal block -200
Standard/Fused terminal block -400
DSI/Fused terminal block -500
DALI/Fused terminal block -600
COLOuR vARIATION suFFIx
White -0
Grey -1
Black -2
PRODuCT CODE LIGHT sOuRCE/DEsCRIPTION (NOM) DIMENsIONsA B C
sInGLe mOduLe InstALLAtIOn dIReCt/IndIReCt
EL-UNB-114-20_-___ 1 x 14W 680 150 85
EL-UNB-128-20_-___ 1 x 28W 1280 150 85
EL-UNB-135-20_-___ 1 x 35W 1580 150 85
EL-UNB-214-20_-___ 2 x 14W 680 150 85
EL-UNB-228-20_-___ 2 x 28W 1280 150 85
EL-UNB-235-20_-___ 2 x 35W 1580 150 85
tAndem mOduLe InstALLAtIOn dIReCt/IndIReCt
EL-UNB-228-40_-___ 2 x 1 x 28W 2560 150 85
EL-UNB-235-40_-___ 2 x 1 x 35W 3160 150 85
tAndem mOduLe LAmps-InFILL InstALLAtIOn dIReCt/IndIReCt
EL-UNB-128-60_-___ 1 x 28W 2560 150 85
EL-UNB-135-60_-___ 1 x 35W 3160 150 85
EL-UNB-228-60_-___ 2 x 28W 2560 150 85
EL-UNB-235-60_-___ 2 x 35W 3160 150 85
ACCessORIes
PLEASE SEE PAGE 42 FOR ACCESSORIES
A
A
A
B
C
Uno Direct/Indirect with Fagerhult’s R5 Beta louvre and unique ‘dog bone’ uplighting system is available in both single or tandem modules. With LOR’s in excess of 83% the Uno Direct/Indirect will create an airy well illuminated effect to any space.
The luminaire body of extruded aluminium is available in three standard colours, textured Mannex black, white or grey.
Through wiring is standard on all models, connection is made via a three or five way terminal block at each end. A joining kit is required for continuous mounting, refer to the accessories.
OptIOns
+ Organic Response Enabled
INTERCONNECTING ASSEMBLy BRACkET
TANDEM MODULE LAMPS-INFILL INSTALLATION DIRECT/INDIRECT
TANDEM MODULE INSTALLATION DIRECT/INDIRECT
DOG BONE UPLIGhTING SySTEM
N18226
IP20
www.eaglelighting.com.au 67
< contents
unO UNO DIFFUSED DIRECT
TECHNICAL INFORMATION
vARIATION suFFIx
Standard -000
DSI/STD terminal block -100
DALI/STD terminal block -200
Standard/Fused terminal block -400
DSI/Fused terminal block -500
DALI/Fused terminal block -600
COLOuR vARIATION suFFIx
White -0
Grey -1
Black -2
PRODuCT CODE LIGHT sOuRCE/DEsCRIPTION (NOM) DIMENsIONsA B C
sInGLe mOduLe InstALLAtIOn dIReCt
EL-UND-114-10_-___ 1 x 14W 680 150 85
EL-UND-128-10_-___ 1 x 28W 1280 150 85
EL-UND-135-10_-___ 1 x 35W 1580 150 85
EL-UND-214-10_-___ 2 x 14W 680 150 85
EL-UND-228-10_-___ 2 x 28W 1280 150 85
EL-UND-235-10_-___ 2 x 35W 1580 150 85
tAndem mOduLe InstALLAtIOn dIReCt
EL-UND-228-30_-___ 2 x 1 x 28W 2340 150 85
EL-UND-235-30_-___ 2 x 1 x 35W 2940 150 85
tAndem mOduLe LAmps-InFILL InstALLAtIOn dIReCt
EL-UND-128-50_-___ 1 x 28W 2560 150 85
EL-UND-135-50_-___ 1 x 35W 3160 150 85
EL-UND-228-50_-___ 2 x 28W 2560 150 85
EL-UND-235-50_-___ 2 x 35W 3160 150 85
ACCessORIes
PLEASE SEE PAGE 42 FOR ACCESSORIES
A
A
A
B
C
The lined opalescent diffuser version of the Uno is available as a standard single or tandem module for ease of installation.
The luminaire body of extruded aluminium is available in three standard colours, textured Mannex black, white or grey
Through wiring is standard on all models, connection is made via a three or five way terminal block at each end. A joining kit is required for continuous mounting, refer to the accessories.
OptIOns
+ Organic Response Enabled
TANDEM MODULE LAMPS-INFILL INSTALLATION DIRECT
TANDEM MODULE INSTALLATION DIRECT
INTERCONNECTING ASSEMBLy BRACkET
N18226
IP20
www.eaglelighting.com.au 68
< contents
TECHNICAL INFORMATION
A
A
A
B
C
unOUNO DIFFUSED DIRECT/INDIRECT
PRODuCT CODE LIGHT sOuRCE/DEsCRIPTION (NOM) DIMENsIONsA B C
sInGLe mOduLe InstALLAtIOn dIReCt/IndIReCt
EL-UND-114-20_-___ 1 x 14W 680 150 85
EL-UND-128-20_-___ 1 x 28W 1280 150 85
EL-UND-135-20_-___ 1 x 35W 1580 150 85
EL-UND-214-20_-___ 2 x 14W 680 150 85
EL-UND-228-20_-___ 2 x 28W 1280 150 85
EL-UND-235-20_-___ 2 x 35W 1580 150 85
tAndem mOduLe InstALLAtIOn dIReCt/IndIReCt
EL-UND-228-40_-___ 2 x 1 x 28W 2340 150 85
EL-UND-235-40_-___ 2 x 1 x 35W 2940 150 85
tAndem mOduLe LAmps-InFILL InstALLAtIOn dIReCt/IndIReCt
EL-UND-128-60_-___ 1 x 28W 2560 150 85
EL-UND-135-60_-___ 1 x 35W 3160 150 85
EL-UND-228-60_-___ 2 x 28W 2560 150 85
EL-UND-235-60_-___ 2 x 35W 3160 150 85
ACCessORIes
PLEASE SEE PAGE 42 FOR ACCESSORIES
The lined opalescent diffuser version of the Uno is available as a standard single or tandem module for ease of installation. This luminaire has the added advantage of the unique ‘dog bone’ up lighting system will increase the background illuminance and therefore create a more pleasing atmosphere.
The luminaire body of extruded aluminium is available in three standard colours, textured Mannex black, white or grey.
Through wiring is standard on all models, connection is made via a three or five way terminal block at each end. A joining kit is required for continuous mounting, refer to the accessories.
OptIOns
+ Organic Response Enabled
TANDEM MODULE LAMPS-INFILL INSTALLATION DIRECT/INDIRECT
TANDEM MODULE INSTALLATION DIRECT/INDIRECT
N18226
vARIATION suFFIx
Standard -000
DSI/STD terminal block -100
DALI/STD terminal block -200
Standard/Fused terminal block -400
DSI/Fused terminal block -500
DALI/Fused terminal block -600
COLOuR vARIATION suFFIx
White -0
Grey -1
Black -2
INTERCONNECTING ASSEMBLy BRACkET
DOG BONE UPLIGhTING SySTEM
IP20
www.eaglelighting.com.au 69
< contents
unOCONTINUOUS DIFFUSED DIRECT
TECHNICAL INFORMATION
vARIATION suFFIx
Standard -000
DSI/STD terminal block -100
DALI/STD terminal block -200
Standard/Fused terminal block -400
DSI/Fused terminal block -500
DALI/Fused terminal block -600
COLOuR vARIATION suFFIx
White -0
Grey -1
Black -2
PRODuCT CODE LIGHT sOuRCE/DEsCRIPTION (NOM) DIMENsIONsA B C
stARt sInGLe mOduLe - dIReCt
EL-UND-128-11_-___ 1 x 28W 1230 150 85
EL-UND-135-11_-___ 1 x 35W 1530 150 85
COntInuOus sInGLe /tAndem mOduLe - dIReCt
EL-UND-128-12_-___ 1 x 28W 1080 150 85
EL-UND-135-12_-___ 1 x 35W 1380 150 85
EL-UND-228-32_-___ 2 x 1 x 28W 2160 150 85
EL-UND-235-32_-___ 2 x 1 x 35W 2760 150 85
end sInGLe mOduLe - dIReCt
EL-UND-128-13_-___ 1 x 28W 1080 150 85
EL-UND-135-13_-___ 1 x 35W 1380 150 85
ACCessORIes
PLEASE SEE PAGE 42 FOR ACCESSORIES
The lined opalescent diffuser version of the Uno is also available in single and tandem modules with overlapping lamps. The ease of installation is guaranteed through the brilliant ‘clip jointing’ system employed, an installers dream! Uno is available in the Direct/Indirect version with the ‘dog bone’ uplighting system.
The luminaire body of extruded aluminium is available in three standard colours, textured Mannex black, white or grey.
Through wiring is standard on all models, connection is made via a three or five way terminal block at each end. A joining kit is required for continuous mounting, refer to the accessories.
‘Start, Intermediate and End’ modules allow for easy installation, finish the installation with your selection of suspension kits in the accessory section.
OptIOns
+ Organic Response Enabled
N18226
START SINGLE MODULE AND CONTINUOUS SINGLE MODULE INSTALLATION DIRECT
START SINGLE MODULE INSTALLATION DIRECT
IP20
www.eaglelighting.com.au 70
< contents
PRODuCT CODE LIGHT sOuRCE/DEsCRIPTION (NOM) DIMENsIONsA B C
stARt sInGLe mOduLe - dIReCt/IndIReCt
EL-UND-128-21_-___ 1 x 28W 1230 150 85
EL-UND-135-21_-___ 1 x 35W 1530 150 85
COntInuOus sInGLe /tAndem mOduLe - dIReCt/IndIReCt
EL-UND-128-22_-___ 1 x 28W 1080 150 85
EL-UND-135-22_-___ 1 x 35W 1380 150 85
EL-UND-228-42_-___ 2 x 1 x 28W 2160 150 85
EL-UND-235-42_-___ 2 x 1 x 35W 2760 150 85
end sInGLe mOduLe - dIReCt/IndIReCt
EL-UND-128-23_-___ 1 x 28W 1080 150 85
EL-UND-135-23_-___ 1 x 35W 1380 150 85
ACCessORIes
PLEASE SEE PAGE 42 FOR ACCESSORIES
unOCONTINUOUS DIFFUSED DIRECT/INDIRECT
TECHNICAL INFORMATION
vARIATION suFFIx
Standard -000
DSI/STD terminal block -100
DALI/STD terminal block -200
Standard/Fused terminal block -400
DSI/Fused terminal block -500
DALI/Fused terminal block -600
COLOuR vARIATION suFFIx
White -0
Grey -1
Black -2
The lined opalescent diffuser version of the Uno is also available in single and tandem modules with overlapping lamps. The ease of installation is guaranteed through the brilliant ‘clip jointing’ system employed, an installers dream! Uno is available in the Direct/Indirect version with the ‘dog bone’ up lighting system.
The luminaire body of extruded aluminium is available in three standard colours, textured Mannex black, white or grey.
Through wiring is standard on all models, connection is made via a three or five way terminal block at each end. A joining kit is required for continuous mounting, refer to the accessories.
‘Start’ and ‘End’ modules allow for easy installation, finish the installation with your selection of suspension kits in the accessory section.
OptIOns
+ Organic Response Enabled
Dog bone uplighting system
N18226
START SINGLE MODULE AND CONTINUOUS SINGLE MODULE INSTALLATION DIRECT/INDIRECT
START SINGLE MODULE INSTALLATION DIRECT/INDIRECT
IP20
www.eaglelighting.com.au 71
< contents
LARGE TERMINAL CuP 5 POLE CHROME susPENsION CuP
unO ACCESSORIES
sMALL CuP
END PLATE COLOuR
EL-ACC-UNO-END-000 WhITE
EL-ACC-UNO-END-001 GREy
EL-ACC-UNO-END-002 BLACk
DusT COvER DEsCRIPTION
EL-ACC-UNO-COV-000 CLEAR ACRyLIC DUST COVER 14W
EL-ACC-UNO-COV-001 CLEAR ACRyLIC DUST COVER 28W
EL-ACC-UNO-COV-002 CLEAR ACRyLIC DUST COVER 35W
CONTINuOus MODuLEs THROuGH WIRING & PINs DEsCRIPTION
EL-ACC-UNO-WAP-000 3 WIRE hARNESS & MODULE LOCATOR PINS
EL-ACC-UNO-WAP-001 5 WIRE hARNESS & MODULE LOCATOR PINS
IMAGE ShOWS 5 WIRE hARNESS & PINS
uNO EMERGENCY DEsCRIPTION
EL-UNI-030-EM0-005 WhITE
EL-UNI-030-EM1-005 GREy
EL-UNI-030-EM2-005 BLACk
3W em-LED EMERGENCy LUMINAIRE IN 300mm MODULE. CLASSIFICATION C0/C90 - C40NOTE : END PLATEs ARE sOLD sEPARATELY
susPENsION DEsCRIPTION
EL-ACC-UNO-ROD-000 ROD SUSPENSION UNO WhITE - 1M
EL-ACC-UNO-ROD-001 ROD SUSPENSION UNO GREy - 1M
EL-ACC-UNO-ROD-002 ROD SUSPENSION UNO BLACk - 1M
EL-ACC-UNO-ROD-010 ROD SUSPENSION UNO WhITE - 1.5M
EL-ACC-UNO-ROD-011 ROD SUSPENSION UNO GREy - 1.5M
EL-ACC-UNO-ROD-012 ROD SUSPENSION UNO BLACk - 1.5M
susPENsION DEsCRIPTION Y-FIT 250mm END sTOP
EL-ACC-UNO-SUS-000 LARGE TERMINAL CUP 5 POLE - UP TO 1M WhITE
EL-ACC-UNO-SUS-001 LARGE TERMINAL CUP 3 POLE - UP TO 1M WhITE
EL-ACC-UNO-SUS-002 SMALL CUP - UP TO 1M WhITE
EL-ACC-UNO-SUS-003 SMALL CUP - UP TO 1M ChROME
PLEASE CONTACT EAGLE LIGhTING AUSTRALIA IF LONGER SUSPENSION LENGThS ARE REQUIRED. ALL susPENsIONs ARE suPPLIED WITH Y-FIT 250mm END sTOP.
www.eaglelighting.com.au 74
< contents
emergency
www.eaglelighting.com.au 75
< contents
emLED 2.10W
TECHNICAL INFORMATION
INSTALLATION
PRODUCT CODE LIGHT SOURCE/DESCRIPTION
emLED-μ/Au MONITORED VIA
MW-98195 POTENTIAL FREE CONTACT
MW-98196 DALI
emLeD-µ/Au co/D25 Recessed emergency LED luminaire
InstALLAtIon
Luminaire for recessed mounting in suspended ceilings. Also for ventilated areas. Hole diameter 42–44 mm. For ceiling thicknesses from 15 up to 35 mm. When the suspended ceiling is 15 mm thick, a minimum of 160 mm free space above the suspended ceiling is required.
connectIon
Terminal block 4x2.5 mm² for connecting a fixed phase, neutral and possible control and monitoring system. Through-wiring is not possible.
DesIgn
Lamp housing of aluminium that additionally acts as a heat conductor. Reflector and ballast housing of plastic. Stainless steel spring clips for recessed installation. NiMH-batteries and dual-coloured status LED.
Articulated function also permits installation in confined areas where the distance between the suspended ceiling and the one piece ceiling is limited. The whole ballast and battery pack can be installed and removed through the hole made in the ceiling for the lamp housing. Equipped with self-test as standard (Autotest IV) equivalent to standard EN 62034 with the possibility of external supervision via either a potential free contact or DALI (dependent on product selection).
LIght DIstrIbutIon
White high-efficiency LED, round beam. Lighting data available via the Fagerhult website or DIALux.
mIsceLLAneous
Decentralised emergency light function, 3 hours operation in emergency lighting mode. 230 V, protection class II, IP 30.
sPAcIng
15.3m is the maximum spacing between luminaires as ranked by tables 5.1-5.5 of AS/NZS 2293.3 2005 Part 1 when mounted at a height of 2.7 metres. For the ranking and spacing distance of luminaires mounted at other heights, refer to tables 5.1-5.5.
APProVAL
PHOTOMETRIC TEST: LL15198THERMAL TEST: LL1134304T
N18226
IP20
www.eaglelighting.com.au 76
< contents
TECHNICAL INFORMATION
PRODUCT CODE LIGHT SOURCE/DESCRIPTION (NOM) DIMENSIONSA B C D
iTrack-emLED
EL-ITS-002-000 iTrack emLED 350 235 52 68
itrack-emLeD co/D25 iTrack mounted emergency LED luminaire
InstALLAtIon
Luminaire suitable to be directly connected to an iTrack system.
LAmPheAD
The lamphead is designed for superb performance from a 3 watt single white LED. It has a built-in reflector to acheive the maximum efficient output, as well as an LED charge indicator and a test switch.
LIght DIstrIbutIon
White high-efficiency LED, round beam. Lighting data available via the Fagerhult website or DIALux.
mIsceLLAneous
Decentralised emergency light function, 3 hours operation in emergency lighting mode. 240 V, protection class II, IP 20.
sPAcIng
15.3m is the maximum spacing between luminaires as ranked by tables 5.1-5.5 of AS/NZS 2293.3 2005 Part 1 when mounted at a height of 2.7 metres. For the ranking and spacing distance of luminaires mounted at other heights, refer to tables 5.1-5.5.
APProVAL
PHOTOMETRIC TEST: LL15198THERMAL TEST: LL1134304T
10
21
31
42
1
emLED 2.10W
CLOSE uP OF THE LED LAMPHEAD THE iTRACk SySTEM
A
B
C
D
IP30
www.eaglelighting.com.au 78
< contents
downlights
www.eaglelighting.com.au 79
< contents
orion A recessed, LED downlight that sits flush with the ceiling, perfect for a broad range of applications
TECHNICAL INFORMATION
SiDE ViEw
CUTOUT
A
B0
500
1000
1500
2000
2500
An easy to install, efficient and elegant LED downlight designed to be used across a broad range of applications where an affordable, no-fuss but beautiful solution is needed.
The LED module of the Orion distributes a highly uniform symmetrical beam with no visible striations.
The fitting can be re-lamped with a simple twist-lock, which means it is easy to maintain and you can rest easy that lamps will always be available for your fitting no matter how much LED technology progresses.
oPtions
+ Available in white
+ Beam angle 24° or 40°
+ Colour temperature 3000k or 4000k
N18226
IP20
EXAMPLE ONLY
BEAM ANGLE LUMENSCOLOUR TEMP
El-ori-324-120-000
LED
TECHNICAL SPECIFICATIONS
Total luminaire efficacy minimum > 80lm/w at CRi 83
MacAdam < 4 SDCM
CRi 700LM fitting = 92 900 & 1100LM fitting = 83
Lifetime 700 & 900LM = 50,000hrs / L70B50 1100LM = 40,000hrs / L70B50
System guarantee 5 years
PRODUCT CODE LIGHT SOURCE/DESCRIPTION (NOM) DIMENSIONSA B C CuTOuT
ORiOn FixED 24° white
EL-ORi-324-120-000 700LM, 3K 80 55 70
EL-ORi-424-120-000 700LM, 4K 80 55 70
EL-ORi-324-220-000 900LM, 3K 80 55 70
EL-ORi-424-220-000 900LM, 4K 80 55 70
EL-ORi-324-320-000 1100LM, 3K 80 55 70
EL-ORi-424-320-000 1100LM, 4K 80 55 70
ORiOn FixED 40° white
EL-ORi-340-120-000 700LM, 3K 80 55 70
EL-ORi-440-120-000 700LM, 4K 80 55 70
EL-ORi-340-220-000 900LM, 3K 80 55 70
EL-ORi-440-220-000 900LM, 4K 80 55 70
EL-ORi-340-320-000 1100LM, 3K 80 55 70
EL-ORi-440-320-000 1100LM, 4K 80 55 70
DRiVER OpTiOnS
EL-99011 LED DRiVER LCi 015/0350 E020 120-240V C/w FLEx AnD pLuG - nOn DiM
EL-99012 LED DRiVER LCAi 015/0350 A020 OnE4ALL 220-240V C/w F&p - DALi/DSi
www.eaglelighting.com.au 80
< contents
orion
Phantom A recessed LED darklighter with an anti-glare baffle
TECHNICAL INFORMATION
SiDE ViEw BLACK VERSiOn ALSO AVAiLABLE
PRODUCT CODE LIGHT SOURCE/DESCRIPTION (NOM) DIMENSIONSA B C CuTOuT
ORiOn RECESSED TRiMLESS 24° white
EL-ORi-324-110-000 11.3w, 700LM, 3K 90 105 78
EL-ORi-424-110-000 11.3w, 700LM, 4K 90 105 78
EL-ORi-324-210-000 11.3w, 900LM, 3K 90 105 78
EL-ORi-424-210-000 11.3w, 900LM, 4K 90 105 78
EL-ORi-324-310-000 13.5w, 1100LM, 3K 90 105 78
EL-ORi-424-310-000 13.5w, 1100LM, 4K 90 105 78
ORiOn RECESSED TRiMLESS 40° white
EL-ORi-340-110-000 11.3w, 700LM, 3K 90 105 78
EL-ORi-440-110-000 11.3w, 700LM, 4K 90 105 78
EL-ORi-340-210-000 11.3w, 900LM, 3K 90 105 78
EL-ORi-440-210-000 11.3w, 900LM, 4K 90 105 78
EL-ORi-340-310-000 13.5w, 1100LM, 3K 90 105 78
EL-ORi-440-310-000 13.5w, 1100LM, 4K 90 105 78
DRiVER OpTiOnS
EL-99011 LED DRiVER LCi 015/0350 E020 120-240V C/w FLEx AnD pLuG - nOn DiM
EL-99012 LED DRiVER LCAi 015/0350 A020 OnE4ALL 220-240V C/w F&p - DALi/DSi
CUTOUT
A
B 0
500
1000
1500
2000
2500
An easy to install, efficient and elegant LED downlight designed to be used across a broad range of applications where a no-fuss but beautiful solution is needed.
The Orion phantom includes a deep drawn, textured matte baffle for visual comfort, along with a low profile trim that delivers a minimalist architectural look, as well as a highly uniform symmetrical beam.
The fitting can be re-lamped with a simple twist-lock, which means it is easy to maintain and you can rest easy that lamps will always be available for your fitting no matter how much LED technology progresses.
oPtions
+ Available in both white and black
+ Beam angle 24° or 40°
+ Colour temperature 3000k or 4000k
IP20
TECHNICAL SPECIFICATIONS
Total luminaire efficacy minimum > 80lm/w at CRi 83
MacAdam < 4 SDCM
CRi 700LM fitting = 92 900 & 1100LM fitting = 83
Lifetime 700 & 900LM = 50,000hrs / L70B50 1100LM = 40,000hrs / L70B50
System guarantee 5 years
EXAMPLE ONLY
BEAM ANGLE
LUMENS FITTING COLOUR
COLOUR TEMP
El-ori-324-110-000
LED
N18226
www.eaglelighting.com.au 81
< contents
orion tilt A recessed, LED downlight that can be tilted, perfect for accenting design elements in an environment
TECHNICAL INFORMATION
STAinLESS STEEL OpTiOn ALSO AVAiLABLE
PRODUCT CODE LIGHT SOURCE/DESCRIPTION (NOM) DIMENSIONSA B C CuTOuT
ORiOn FixED 24° white
EL-ORi-324-130-000 11.3w, 700LM, 3K 105 55 90
EL-ORi-424-130-000 11.3w, 700LM, 4K 105 55 90
EL-ORi-324-230-000 11.3w, 900LM, 3K 105 55 90
EL-ORi-424-230-000 11.3w, 900LM, 4K 105 55 90
EL-ORi-324-330-000 13.5w, 1100LM, 3K 105 55 90
EL-ORi-424-330-000 13.5w, 1100LM, 4K 105 55 90
ORiOn FixED 40° white
EL-ORi-340-130-000 11.3w, 700LM, 3K 105 55 90
EL-ORi-440-130-000 11.3w, 700LM, 4K 105 55 90
EL-ORi-340-230-000 11.3w, 900LM, 3K 105 55 90
EL-ORi-440-230-000 11.3w, 900LM, 4K 105 55 90
EL-ORi-340-330-000 13.5w, 1100LM, 3K 105 55 90
EL-ORi-440-330-000 13.5w, 1100LM, 4K 105 55 90
DRiVER OpTiOnS
EL-99011 LED DRiVER LCi 015/0350 E020 120-240V C/w FLEx AnD pLuG - nOn DiM
EL-99012 LED DRiVER LCAi 015/0350 A020 OnE4ALL 220-240V C/w F&p - DALi/DSi
CUTOUT
A
B 0
500
1000
1500
2000
2500
An easy to install, efficient and elegant LED downlight designed to be used across a broad range of applications where an affordable, no-fuss but beautiful solution is needed.
The Orion Tilt has an adjustable gimble so the light beam can be directed to best accent any design elements within an environment.
The LED module of the Orion distributes a highly uniform symmetrical beam with no visible striations.
The fitting can be re-lamped with a simple twist-lock, which means it is easy to maintain and you can rest easy that lamps will always be available for your fitting no matter how much LED technology progresses.
oPtions
+ Available in white or stainless steel
+ Beam angle 24° or 40°
+ Colour temperature 3000k or 4000k
IP20
EXAMPLE ONLY
BEAM ANGLE LUMENSCOLOUR TEMP
El-ori-324-120-000
LED
TECHNICAL SPECIFICATIONS
Total luminaire efficacy minimum > 80lm/w at CRi 83
MacAdam < 4 SDCM
CRi 700LM fitting = 92 900 & 1100LM fitting = 83
Lifetime 700 & 900LM = 50,000hrs / L70B50 1100LM = 40,000hrs / L70B50
System guarantee 5 years
N18226
www.eaglelighting.com.au 82
< contents
iP65
rat
Ed d
ow
nli
gh
t
iP65 ratEdLED Downlight
TECHNICAL INFORMATION
PRODUCT CODE DESCRIPTION (NOM) DIMENSIONSA B C CuTOuT
ip65 FiTTinG OnLY
LC-ip115-wH wHiTE 85 30 65
A
B
CUTOUT
N18226
SiDE ViEw
A compact downlight utilising a Cn50 LED lamp, supplied with a remote mounted electronic transformer or driver.
The fixture is fully sealed from below and is ideal for small to medium areas where moisture or steam is present.
Applications include toilets, shower areas, bathrooms and retail food areas where hosing down of areas may occur.
oPtions
+ Tamper proof version
LED IP65
www.eaglelighting.com.au 83
< contentsfa
cEtt
Ed
facEttEdCompact fluorescent downlight
TECHNICAL INFORMATION
vARIATION SUFFIX
Standard -000
DSi/STD terminal block -100
DALi/STD terminal block -200
1-10V/STD terminal block -300
Standard/Fused terminal block -400
DSi/Fused terminal block -500
DALi/Fused terminal block -600
1-10V/Fused terminal block -700
SiDE ViEw
PRODUCT CODE LIGHT SOURCE/DESCRIPTION (NOM) DIMENSIONSA B C CuTOuT
FACETTED inTEGRAL GEAR
EL-FAC-113-A0_-___ 1 x 13w 175 160
EL-FAC-213-B0_-___ 2 x 13w 200 200
EL-FAC-118-B0_-___ 1 x 18w 200 200
FACETTED REMOTE GEAR
EL-FAC-113-A2_-___ 1 x 13w 130 160
EL-FAC-213-B2_-___ 2 x 13w 155 200
EL-FAC-118-B2_-___ 1 x 18w 155 200
EL-FAC-226-B2_-___ 2 x 26w Remote Gear Only 155 200
EL-FAC-226-C2_-___ 2 x 26w Remote Gear Only 170 240
AB
CUTOUT CUTOUT
FACETTED 2x18W | LOR 66%
Available in three sizes, this range of fluorescent downlights utilise a specular facetted reflector. The multi facets break up the reflected lamp image at critical viewing angles promoting low glare and high visual comfort whilst still providing ‘bling’ and pizzazz.
An economical priced downlight complete with electronic control gear, suitable for applications such as retail area with low ceiling heights, foyers and reception areas.
oPtions
+ Surface mounted
+ Sloping ceiling
+ Semi-recessed
+ Seismic Restraint
PLEASE SEE PAGE 78 FOR ACCESSORY AND vARIATION DIAGRAM
N18226
IP20
www.eaglelighting.com.au 84
< contents
sati
n
satinCompact fluorescent downlight
TECHNICAL INFORMATION
SiDE ViEw
vARIATION SUFFIX
Standard -000
DSi/STD terminal block -100
DALi/STD terminal block -200
1-10V/STD terminal block -300
Standard/Fused terminal block -400
DSi/Fused terminal block -500
DALi/Fused terminal block -600
1-10V/Fused terminal block -700
PRODUCT CODE LIGHT SOURCE/DESCRIPTION (NOM) DIMENSIONSA B C CuTOuT
SATin inTEGRAL GEAR
EL-SAT-113-A0_-___ 1 x 13w 175 160
EL-SAT-118-B0_-___ 1 x 18w 200 200
EL-SAT-218-B0_-___ 2 x 18w 200 200
SATin REMOTE GEAR
EL-SAT-113-A2_-___ 1 x 13w 130 160
EL-SAT-118-B2_-___ 1 x 18w 155 200
EL-SAT-218-B2_-___ 2 x 18w 155 200
EL-SAT-226-B2_-___ 2 x 26w Remote Gear Only 155 200
EL-SAT-226-C2_-___ 2 x 26w Remote Gear Only 170 240
AB
CUTOUT CUTOUT
SATin 2x18W | LOR 60%
PLEASE SEE PAGE 78 FOR ACCESSORY AND vARIATION DIAGRAM
An economically priced downlight complete with electronic control gear and available in three sizes. This fixture has a satin matte reflector which is easy to maintain and is resistant to finger marks.
its low sheen finish when illuminated provides a pleasing ‘soft’ appearance with a reduction in reflected lamp imaging.
Suitable for use in a variety of diverse applications such as corridors, utility areas, toilets, foyers and back of house areas.
Also available with various options listed elsewhere in this catalogue.
oPtions
+ Surface mounted
+ Sloping ceiling
+ Semi-recessed
+ Seismic Restraint
N18226
IP20
www.eaglelighting.com.au 85
< contentssP
Ecu
lar
sPEcularCompact fluorescent downlight
TECHNICAL INFORMATION
AB
CUTOUT CUTOUT
vARIATION SUFFIX
Standard -000
DSi/STD terminal block -100
DALi/STD terminal block -200
1-10V/STD terminal block -300
Standard/Fused terminal block -400
DSi/Fused terminal block -500
DALi/Fused terminal block -600
1-10V/Fused terminal block -700
SiDE ViEw
PRODUCT CODE LIGHT SOURCE/DESCRIPTION (NOM) DIMENSIONSA B C CuTOuT
SpECuLAR inTEGRAL GEAR
EL-SpE-113-A0_-___ 1 x 13w 175 160
EL-SpE-118-B0_-___ 1 x 18w 200 200
EL-SpE-218-B0_-___ 2 x 18w 200 200
SpECuLAR REMOTE GEAR
EL-SpE-113-A2_-___ 1 x 13w 130 160
EL-SpE-118-B2_-___ 1 x 18w 155 200
EL-SpE-218-B2_-___ 2 x 18w 155 200
EL-SpE-226-B2_-___ 2 x 26w Remote Gear Only 155 200
EL-SpE-226-C2_-___ 2 x 26w Remote Gear Only 170 240
85
171
256
341
1
SpECuLAR 2x18W | LOR 70%
PLEASE SEE PAGE 72 FOR ACCESSORY AND vARIATION DIAGRAM
This downlight is part of the same family as the Facetted and Satin range. Having the same dimensions and with similar pricing, Specular features a highly specular reflector to produce the ultimate ‘darklighter’ effect.
This fixture is highly effective in specialist applications such as boardrooms or retail stores where the lighting is to appear unobtrusive and not in competition with or intruding on point of sale merchandise. Often a tunnel or cavern effect is desirable for specialist areas and Specular achieves this with its excellent lamp shielding.
Specular is also available with many options as listed elsewhere in this catalogue.
oPtions
+ Surface mounted
+ Sloping ceiling
+ Semi-recessed
+ Seismic Restraint
N18226
IP20
www.eaglelighting.com.au 86
< contents
accE
sso
riE
s
accEssoriEsCompact fluorescent downlights
ACCESSORIES FROSTED GLASS
SiZE A
EL-DLT-ACC-108-000 Frosted Glass Disc Only (220 mm)
SiZE B
EL-DLT-ACC-103-000 Frosted Glass Disc Only (260 mm)
EL-DLT-ACC-105-000 Frosted Outer - Clear Centre (260 mm)
EL-DLT-ACC-106-000 Frosted Centre - Clear Outer (260 mm)
EL-DLT-ACC-107-000 Frosted Centre - Clear Outer (260 mm x 5mm)
EL-DLT-ACC-110-000 Frosted Centre (180 mm) - Clear Outer (260 mm)
SiZE C
EL-DLT-ACC-109-000 Frosted Glass Disc Only (300 mm) Toughened
EL-DLT-ACC-111-000 Frosted Centre - Clear Outside (300 mm x 5mm)
EL-DLT-ACC-104-000 Frosted Glass Disc Only - Frosted Glass Disc Only (300 mm)
ACCESSORIES FROSTED DOUGHNUT GLASS
SiZE A
EL-DLT-ACC-100-000 Doughnut Glass Ring Only (220 mm)
SiZE B
EL-DLT-ACC-101-000 Doughnut Glass Ring Only (260 mm)
SiZE C
EL-DLT-ACC-102-000 Doughnut Glass Ring Only (300 mm)
FROSTED GLASS
DOUGHNUT RING
TURBO LOUvRE CROSS LOUvREWALL WASHERDIFFUSED
SiZE B OnLY SiZE B OnLYK12 STAnDARD
www.eaglelighting.com.au 87
< contentsac
cEss
or
iEs
TECHNICAL INFORMATION
PRODUCT CODE LIGHT SOURCE/DESCRIPTION (NOM) DIMENSIONSA B C D
pLEiAD G3 AnTi-LiGATuRE KiT
wH-MALKiTpleiad G3 Anti-ligature Kit suits both Compact and Comfort fittings
232 250 100/137 165
wH-HAL-KEY Special tool required for accessing and fixing
PlEiad g3 anti-ligaturE kit Anti-ligature kit for the pleiad G3 luminaire range
This anti-ligature kit has a high impact 5mm thick polycarbonate cover retained by ceiling mounting plate, front polycarbonate bezel and tamper proof screws.
+ High impact 5mm thick polycarbonate cover
+ Front bezel is screw fixed to the rear ceiling plate and secured by retaining tamper proof screws
+ Compatible with both Compact and Comfort pleiad G3 luminaires
+ pleiad G3 LED luminaire to be ordered separately
N18226
C
B
AD
AnTi-LiGATuRE KiT BEinG inSTALLED pLEiAD G3 FiTTinG (nOT inCLuDED)
www.eaglelighting.com.au 88
< contents
accE
sso
riE
s
TECHNICAL INFORMATION
pLEiAD G3 RETROFiT KiT pLEiAD G3 FiTTinG (nOT inCLuDED)
PRODUCT CODE LIGHT SOURCE/DESCRIPTION (NOM) DIMENSIONSA B C D
pLEiAD G3 LED RETROFiT
wH-MLAREFiT pleiad G3 Retrofit Kit 270 270 0.5 250
PlEiad g3 lEd rEtrofit Retrofit kit to convert fluorescent downlights to LED
Retrofit kit for the replacement of any compact fluorescent downlight to LED with a cut aperture of up to 240mm. Supplied with steel pattress and a 250mm attachment bezel which removes the need to replace any ceiling tiles.
+ Replace any CFL downlight with a cut aperture of 240mm or less to pleiad G3 LED without replacing the ceiling tile or altering plasterboard ceilings
+ Retrofit kit consists of a pattress and 250mm diameter pleiad G3 LED attachment bezel
+ Steel pattress is designed to go through all cut apertures greater than 165mm
+ pleiad G3 LED luminaire to be ordered separately
N18226
C
B A
D
www.eaglelighting.com.au 91
< contents
wall lights
www.eaglelighting.com.au 92
< contents
lUNaIP44 Wall or ceiling light
TECHNICAL INFORMATION
vARIATION suFFIx
Standard -000
DSI/STD terminal block -100
DALI/STD terminal block -200
Standard/Fused terminal block -400
DSI/Fused terminal block -500
DALI/Fused terminal block -600
CeILIng mounTeD
PRODuCT CODE LIGHT sOuRCE/DEsCRIPTION (NOM) DIMENsIONsA B C
LunA
eL-Lun-122-100-___ 1 x 22W T5c 300 110
eL-Lun-140-100-___ 1 x 40W T5c 400 110
eL-Lun-155-100-___ 1 x 55W T5c 400 110
35
71
106
142
1
Luna has a pleasing appearance and provides high visual comfort with a soft, pleasant lighting effect. Backlight on to the surrounding wall or ceiling further enhances the ambience of the area.
Fitted with T5 circular fluorescent lamps which provide even luminance over the entire diffuser area. The dense opal acrylic diffuser provides excellent lamp obscuration with the absence of ‘hot spots’.
The luminaire is fully gasketted to prevent the ingress of insects and contaminants. Luna has hidden latches for positive diffuser retention whether wall or ceiling mounted. Fully tested for thermals/photometric performance, Luna is suitable for both residential and commercial applications including residential nursing homes, breakout areas, stairwells, hospitals, rest rooms, schools, bedrooms and corridors.
A
B
LunA 1x40W | LoR 59%
N18226
IP44
www.eaglelighting.com.au 93
< contents
TECHNICAL INFORMATION
BElls t5 WALL LIghT
vARIATION suFFIx
Standard -000
DSI/STD terminal block -100
DALI/STD terminal block -200
1-10V/STD terminal block -300
Standard/Fused terminal block -400
DSI/Fused terminal block -500
DALI/Fused terminal block -600
1-10V/Fused terminal block -700
A
B
C
PRODuCT CODE LIGHT sOuRCE/DEsCRIPTION (NOM) DIMENsIONsA B C
BeLLS T5
eL-BeL-114-100-___ 1 x 14W T5 matte opal glass 680 125 90
eL-BeL-114-101-___ 1 x 14W T5 White opal Acrylic 680 125 90
eL-BeL-124-100-___ 1 x 24W T5 matte opal glass 680 125 90
eL-BeL-124-101-___ 1 x 24W T5 White opal Acrylic 680 125 90
This luminaire is designed for either 14 or 24W T5 linear lamps and incorporates electronic control gear as standard. Available in white opal acrylic.
Bells T5 has a pleasing curved linear shape that will suit most contemporary interiors. It provides soft, even lighting with no discernible ‘hot spots’ on the acrylic shade.
Ideal for applications as diverse as residential units, aged care homes, hotels, corridors, stairwells, reception areas, lift lobbies, mirror lights etc.
N18226
IP20
www.eaglelighting.com.au 94
< contents
BlaDERUNNERuPLIghTeR
SIDe VIeW
Constructed from sheet steel, Bladerunner is a wall mounted up lighter, utilising twin lamp, 36W or twin 55W TCL lamps.
Bladerunner’s lumen package more than equals that of comparable metal halide fixtures without the associated ‘hotspots’ commonly found with hID luminaires.
Suitable for dimming, the light output from the luminaire may be controlled, providing different scenes and mood changes, within the space.
Bladerunner provides a soft, assymetric light distribution on the ceiling, which creates a pleasing ambience and high visual comfort, within the area.
Its ‘edgy’ design, slim dimensions and aesthetic appearance make it an ideal choice for most contemporary interiors such as lobbies, reception areas, boardrooms and break out areas.
Available in white or silver powdercoat finish.
TECHNICAL INFORMATION
vARIATION suFFIx
Standard -000
DSI/STD terminal block -100
DALI/STD terminal block -200
1-10V/STD terminal block -300
Standard/Fused terminal block -400
DSI/Fused terminal block -500
DALI/Fused terminal block -600
1-10V/Fused terminal block -700
PRODuCT CODE LIGHT sOuRCE/DEsCRIPTION (NOM) DIMENsIONsA B C
BLADeRunneR
eL-BDR-236-100-___ 2 x 36W TC-L (hF) WhITe 740 235 45
eL-BDR-236-101-___ 2 x 36W TC-L (hF) SILVeR 740 235 45
eL-BDR-255-100-___ 2 x 55W TC-L (hF) WhITe 740 235 45
eL-BDR-255-101-___ 2 x 55W TC-L (hF) SILVeR 740 235 45
B
C
A
B
C
A N18226
IP20
www.eaglelighting.com.au 96
< contents
ceiling lights
www.eaglelighting.com.au 97
< contents
AeriAl led Suspended LED luminaire with hexaprism optic. Suitable for low or high bay applications.
TECHNICAL INFORMATION
AEriAL LED cut through AEriAL LED twin vAriAtion
PRODUCT CODE LIGHT SOURCE/DESCRIPTION (NOM) DIMENSIONSA B c cutout
AEriAL LED
wh-AELMY14K 8800lm, 98w DALi 486 354 113
wh-AELMY14KEM 8800lm, 98w DALi 3 hr emergency 486 354 113
wh-AELMY24K 17700lm, 196w DALi 952 354 113
wh-AELMY24KEM 17700lm, 196w DALi 3 hr emergency 952 354 113
wh-AELMY34K 26800lm, 294w DALi 1418 354 113
wh-AELMY34KEM 26800lm, 294w DALi 3 hr emergency 1418 354 113
AEriAL LED twin
wh-AEtMY14K 22000lm, 222w DALi 1418 281 87
wh-AEtMY14KEM 22000lm, 222w DALi 3 hr emergency 1418 281 87
AEriAL Sport
wh-AESLY14K 24700lm, 300w DALi 1418 354 113
wh-AESLY14KEM 24700lm, 300w DALi 3 hr emergency 1418 354 113
DrivEr optionS
wh-AErSK1 Suspension Kit
wh-AErLtru Alternative mounting kit (not for use with 8800 lumen product)
wh-AEtMtru Alternative mounting kit (Aerial LED twin only)
B
C
A
cd/klm
500
the Aerial LED range is the universal solution for any large area lighting project. whether in industrial applications, warehouses, sports or retail, Aerial LED delivers low energy, high comfort lighting with minimal through life maintenance.
Aerial LED brings the latest diffuser technology usually seen only in high-end office solutions to area lighting. the unique hexaprism diffuser optic completely eliminates glare from every angle of view, adding a level of comfort and lighting quality never before seen in this type of application.
For sports halls, a special variant of Aerial LED has been created which combines all of the energy benefits of the standard luminaire with features specially developed for sports applications. A bespoke polycarbonate hexaprism diffuser is employed to eliminate glare, even when viewed from directly below the luminaire. this is particularly important when sports such as badminton are played. the LED light engines are also completely flicker-free, making it easier to see fast moving objects at any height. the minimal maintenance factor of Aerial LED is particularly beneficial in sports applications, where fewer luminaires are typically used.
OPtiOns
+ Alternative mounting kit available for surface, trunking, chain or drop rod mounting (supplied separately)
N18226
LED IP40
www.eaglelighting.com.au 98
< contents
AeriAl t5 Suspended t5 high bay luminaire
TECHNICAL INFORMATION
inStALLED AEriAL Fitting
PRODUCT CODE LIGHT SOURCE/DESCRIPTION (NOM) DIMENSIONSA B c cutout
AEriAL t5 high FrEquEncY
wh-AErh449 4 x 49w 1472 356 100
wh-AErh649 6 x 49w 1478 450 118
wh-AErh480 4 x 80w 1472 356 100
wh-AErh680 6 x 80w 1478 450 118
AEriAL t5 3 hour EMErgEncY
wh-AErh449EMin 4 x 49w 1472 356 100
wh-AErh649EMin 6 x 49w 1478 450 118
wh-AErh480EMin 4 x 80w 1472 356 100
wh-AErh680EMin 6 x 80w 1478 450 118
DrivEr optionS
wh-AErSK1 wire suspension kit pp to 3m drop
B
C
A
cd/klm
400
Suspended fluorescent high output with high reflectivity aluminium optic to control glare as well as optimising horizontal and vertical illuminance. Four suspension points for wire or chain suspension.
combination of specular and semi-specular reflectors for high efficiency and controlled contrast. uplighting element. Suitable for mounting heights between 4m and 8m.
Steel body finished white. optional suspension kit with up to 3m drop. on high frequency versions, lamps are separately switched to allow varying light levels. trunk mounting kit ordered seperately.
OPtiOns
+ Available with hF gear or 3 hour emergency
+ DALi dimming - replace h with Y (i.e AErY449)
N18226
IP40
www.eaglelighting.com.au 99
< contents
BAtten sliMline A general purpose slimline batten for semi-industrial applications
TECHNICAL INFORMATION
cLoSE up viEw
vARIATION SUFFIx
Standard -000
DSi/StD terminal block -100
DALi/StD terminal block -200
1-10v/StD terminal block -300
Standard/Fused terminal block -400
DSi/Fused terminal block -500
DALi/Fused terminal block -600
1-10v/Fused terminal block -700
PRODUCT CODE LIGHT SOURCE/DESCRIPTION (NOM) DIMENSIONSA B c
SLiMLinE BAttEn SurFAcE MountED
EL-BAt- 114-100-___ 1 x 14w t5 570 35 55
EL-BAt- 214-100-___ 2 x 14w t5 570 70 55
EL-BAt- 128-100-___ 1 x 28w t5 1170 35 55
EL-BAt- 228-100-___ 2 x 28w t5 1170 70 55
A general purpose slimline batten suitable for ‘back of house‘ applications such as plant rooms, workshops, pelmets, basements and store rooms etc.
A BB
C C
N18226
169
339
508
678
1
IP20
www.eaglelighting.com.au 100
< contents
BAtten Wire gUArd A general purpose range of batten units with sheet steel guard.
vARIATION SUFFIx
Standard -000
DSi/StD terminal block -100
DALi/StD terminal block -200
1-10v/StD terminal block -300
Standard/Fused terminal block -400
DSi/Fused terminal block -500
DALi/Fused terminal block -600
1-10v/Fused terminal block -700
TECHNICAL INFORMATION
cLoSE up viEw
PRODUCT CODE LIGHT SOURCE/DESCRIPTION (NOM) DIMENSIONSA B c
wirEguArD BAttEn SurFAcE MountED
EL-BAt- 114-103-___ 1 x 14w t5 575 80 75
EL-BAt- 214-103-___ 2 x 14w t5 575 80 75
EL-BAt- 128-103-___ 1 x 28w t5 1175 80 75
EL-BAt- 228-103-___ 2 x 28w t5 1175 80 75
124
248
371
495
1
A slimline, surface mounted batten unit, complete with sheet steel constructed guard for increased strength.
this range is suitable for ‘back of house‘ applications such as machine and plant rooms, storage areas and locker rooms. the wire guard is simply a mechanical device to protect the lamps from damage in adverse conditions.
A BB
C C
N18226
IP20
www.eaglelighting.com.au 101
< contents
vARIATION SUFFIx
Standard -000
DSi/StD terminal block -100
DALi/StD terminal block -200
1-10v/StD terminal block -300
Standard/Fused terminal block -400
DSi/Fused terminal block -500
DALi/Fused terminal block -600
1-10v/Fused terminal block -700
TECHNICAL INFORMATION
cLoSE up viEw
PRODUCT CODE LIGHT SOURCE/DESCRIPTION (NOM) DIMENSIONSA B c
DiFFuSED BAttEn SurFAcE MountED
EL-BAt- 114-101-___ 1 x 14w t5 615 55 95
EL-BAt- 214-101-___ 2 x 14w t5 615 115 95
EL-BAt- 128-101-___ 1 x 28w t5 1225 55 95
EL-BAt- 228-101-___ 2 x 28w t5 1225 115 95
BAtten diFFUsed A general purpose range of batten units with diffused accessories
A slimline range of surface mounted battens with a prismatic diffuser.
this range is suitable for ‘back of house‘ applications such as machine and plant rooms, corridors, stairwells, storage areas and locker rooms.
the prismatic diffuser reduces glare from the lamp at critical viewing angles and reduces contrast brightness.
A BB
C C
N18226
IP20
www.eaglelighting.com.au 102
< contents
BAtten AnglesKirt A general purpose batten with angle skirt for semi-industrial applications
vARIATION SUFFIx
Standard -000
DSi/StD terminal block -100
DALi/StD terminal block -200
1-10v/StD terminal block -300
Standard/Fused terminal block -400
DSi/Fused terminal block -500
DALi/Fused terminal block -600
1-10v/Fused terminal block -700
TECHNICAL INFORMATION
cLoSE up viEw
PRODUCT CODE LIGHT SOURCE/DESCRIPTION (NOM) DIMENSIONSA B c
AngLE SKirt BAttEn SurFAcE MountED
EL-BAt-114-102-___ 1 x 14w t5 570 130 65
EL-BAt-214-102-___ 2 x 14w t5 570 130 65
EL-BAt-128-102-___ 1 x 28w t5 1170 130 65
EL-BAt-228-102-___ 2 x 28w t5 1170 130 65
169
339
508
678
1
A general purpose slimline batten suitable for ‘back of house‘ applications such as plant rooms, workshops, pelmets, basements and store rooms etc.
the angle skirt is used to direct more light onto the workplace by reflecting light that otherwise would have been emitted at an upward angle.
A BB
C C
N18226
IP20
www.eaglelighting.com.au 103
< contents
PelMetA continuous lighting system developed for alcoves and pelmets, to provide a continuous, uniform lighting effect
TECHNICAL INFORMATION
vARIATION SUFFIx
Standard -000
DSi/StD terminal block -100
DALi/StD terminal block -200
1-10v/StD terminal block -300
Standard/Fused terminal block -400
DSi/Fused terminal block -500
DALi/Fused terminal block -600
1-10v/Fused terminal block -700
connEction
PRODUCT CODE LIGHT SOURCE/DESCRIPTION (NOM) DIMENSIONSA B c D E
pELMEt SurFAcE MountED
EL-pMt-114-100-___ 1 x 14w t5 575 85 60 65 65
EL-pMt-124-100-___ 1 x 24w t5 575 85 60 65 65
EL-pMt-128-100-___ 1 x 28w t5 1175 75 50 65 85
EL-pMt-154-100-___ 1 x 54w t5 1175 75 50 65 85
the pelmet lighting system offers an economical yet efficient method of providing an even distribution of light in pelmets and coves.
the offset lamp holders allows for simple overlapping of lamps to ensure even illumination with no ‘black spots’.
the pelmet light is complete with make and break 3 or 5 pole connectors for ease of installation. Available in dimmable and non-dimmable variants.
B C
D
A
E
N18226
124
248
371
495
1
IP20
www.eaglelighting.com.au 106
< contents
security range
www.eaglelighting.com.au 107
< contents
TECHNICAL INFORMATION
PRODUCT CODE LIGHT SOURCE/DESCRIPTION (NOM) DIMENSIONSWATTAGE LUMINOUS
FLUX A B C CUTOUT
TUSCAN T5 SUrFACE MOUNTEd
dP-d890-410613 2x28W Anthracite 1250 150 80
dP-d890-410629 2x28W Black 1250 150 80
dP-d890-410616 2x35W Anthracite 1250 150 80
dP-d890-410632 2x35W Black 1250 150 80
TUSCAN LEd SUrFACE MOUNTEd
dP-d890-410619 4000K Anthracite 21.5 2551 1250 150 80
dP-d890-410635 4000K Black 21.5 2551 1250 150 80
The Tuscan was designed to withstand extreme physical attack. With a heavy gauge steel body, polycarbonate diffuser and tamperproof screws, the Tuscan is suitable for subways, platforms, schools and pedestrian walkways.
Tuscan is available as either a T5 or a LEd solution.
IP 65 | IK10/150 J
OPtiOns
+ T5
+ LEd
N18226
tuscan surface mOunted A surface mounted fitting designed to withstand extreme physical attack
LED IP65 IK10+
www.eaglelighting.com.au 108
< contents
TECHNICAL INFORMATION
PRODUCT CODE LIGHT SOURCE/DESCRIPTION (NOM) DIMENSIONSWATTAGE LUMINOUS
FLUX A B C CUTOUT
TUSCAN T5 60°/30° ANGLE
dP-d892-410614 2x28W Anthracite 1250 114 145
dP-d892-410630 2x28W Black 1250 114 145
dP-d892-410617 2x35W Anthracite 1250 114 145
dP-d892-410633 2x35W Black 1250 114 145
TUSCAN LEd 60°/30° ANGLE
dP-d892-410620 4000K Anthracite 21.5 2551 1250 114 145
dP-d892-410636 4000K Black 21.5 2551 1250 114 145
The Tuscan was designed to withstand extreme physical attack. With a heavy gauge steel body, polycarbonate diffuser and tamperproof screws, the Tuscan is suitable for subways, platforms, schools and pedestrian walkways.
Tuscan is available as either a T5 or a LEd solution.
IP 65 | IK10/150 J
OPtiOns
+ T5
+ LEd
N18226
tuscan 60°/30° angle An angle mounted fitting designed to withstand extreme physical attack
LED IP65 IK10+
www.eaglelighting.com.au 109
< contents
TECHNICAL INFORMATION
PRODUCT CODE LIGHT SOURCE/DESCRIPTION (NOM) DIMENSIONSWATTAGE LUMINOUS
FLUX A B C CUTOUT
TUSCAN T5 45° ANGLE
dP-d893-410615 2x28W Anthracite 1250 121 121
dP-d893-410631 2x28W Black 1250 121 121
dP-d893-410618 2x35W Anthracite 1250 121 121
dP-d893-410634 2x35W Black 1250 121 121
TUSCAN LEd 45° ANGLE
dP-d893-410621 4000K Anthracite 21.5 2551 1250 121 121
dP-d893-410637 4000K Black 21.5 2551 1250 121 121
The Tuscan was designed to withstand extreme physical attack. With a heavy gauge steel body, polycarbonate diffuser and tamperproof screws, the Tuscan is suitable for subways, platforms, schools and pedestrian walkways.
Tuscan is available as either a T5 or a LEd solution.
IP 65 | IK10/150 J
OPtiOns
+ T5
+ LEd
N18226
tuscan 45° angle An angle mounted fitting designed to withstand extreme physical attack
LED IP65 IK10+
www.eaglelighting.com.au 110
< contents
TECHNICAL INFORMATION
PRODUCT CODE LIGHT SOURCE/DESCRIPTION (NOM) DIMENSIONSA B C CUTOUT
PArKALUX
dP-d892-410614 2x28W Anthracite 1220 100 76
dP-d892-410630 2x28W Black 1220 100 76
dP-d892-410617 2x35W Anthracite 1520 100 76
dP-d892-410633 2x35W Black 1520 100 76
Parkalux is a practical luminaire with a small back plate that has been designed to withstand a high level of vandalism.
This surface mounted fitting is an effective general lighting solution for both indoor and outdoor applications. It is the perfect choice in arrival halls, on platforms, in car parks/garages and in passageways.
IP 54 | IK10/100 J
C
B
A
N18226
Parkalux A surface mounted, impact resistant batten.
IK10+IP54
www.eaglelighting.com.au 111
< contents
TECHNICAL INFORMATION
Flair is a vandal and weather resistant linear fitting designed to deliver a high quality of light without the risk of glare.
The surface mounted fitting in extruded aluminium is available with either symmetric or asymmetric light distribution with the choice of T5 or LEd solutions.
Suitable both for indoor and outdoor applications, Flair is an ideal choice for subways, covered pedestrian areas and schools.
IP 65 | IK10/150 J
C
B
A
N18226
flair A surface mounted fitting that delivers high quality lighting with high physical protection
LED IP65 IK10+
PRODUCT CODE LIGHT SOURCE/DESCRIPTION (NOM) DIMENSIONSWATTAGE LUMINOUS
FLUX A B C
FLAIr T5
dP-d900-410650 1X28W Alumium Grey Asymmetric 1215 150 88
dP-d900-410649 2X28W Alumium Grey Symmetric 1215 150 88
dP-d900-410652 1X35W Alumium Grey Asymmetric 1515 150 88
dP-d900-410651 2X35W Alumium Grey Symmetric 1515 150 88
FLAIr LEd
dP-d900-410653 4000K Alumium Grey Terazza 29 2367 1215 150 88
dP-d900-410654 4000K Alumium Grey Opal 29 1818 1215 150 88
www.eaglelighting.com.au 112
< contents
tamPa t5Slimline vandal resistant luminaire
TECHNICAL INFORMATION
vARIATION SUFFIx
Standard -000
dSI/STd terminal block -100
dALI/STd terminal block -200
1-10V/STd terminal block -300
Standard/Fused terminal block -400
dSI/Fused terminal block -500
dALI/Fused terminal block -600
1-10V/Fused terminal block -700
DIFFUSER PANEL OPTIONS SUFFIx
P19 -1
P5 -2
P7 -3
Opal -5
P20 -6
97
195
292
390
1
PRODUCT CODE LIGHT SOURCE/DESCRIPTION (NOM) DIMENSIONSA B C CUTOUT
TAMPA PLASTEr rECESSEd
EL-TMP-114-_00-___ 1 x 14W T5 640 150 90 610 120
EL-TMP-214-_00-___ 2 x 14W T5 640 200 90 610 170
EL-TMP-128-_00-___ 1 x 28W T5 1240 150 90 1210 120
EL-TMP-228-_00-___ 2 x 28W T5 1240 200 90 1210 170
TAMPEr PrOOF SCrEWS
A robust, tamperproof and vandal resistant luminaire for applications as diverse as public housing, change rooms, institutions and other areas prone to vandalism.
Tampa T5 is a recessed plasterboard-ceiling fixture with compact dimensions and utilises either 14 or 28W T5 lamps. Features include a polycarbonate clear cover that sandwiches the opal or prismatic acrylic diffuser to the frame and tamperproof screws, fixing the frame securely to the luminaire housing.
OPtiOns
+ Emergency CO C25 / C90 E25 (1x14W Version)
+ Surface mounted version available upon request
+ Seismic restraint
TAMPA T5 1x14W | LOr 57%
B
C
A
N18226
IP44 IK10+
www.eaglelighting.com.au 113
< contents
tamPa dlVandal resistant downlight
TECHNICAL INFORMATION
A recessed downlight utilising 18 or 26W compact fluorescent lamps, Tampa dL is available with either a 3mm clear or opal polycarbonate diffuser positively fixed to a heavy-duty frame. The frame is securely located to the luminaire housing by means of four tamperproof screws.
Tampa dL is ideal for applications including public housing, change rooms, institutions and other areas prone to vandalism.
OPtiOns
+ Seismic restraint
TAMPErPrOOF SCrEWS SIdE VIEW
vARIATION SUFFIx
Standard -000
dSI/STd terminal block -100
dALI/STd terminal block -200
1-10V/STd terminal block -300
Standard/Fused terminal block -400
dSI/Fused terminal block -500
dALI/Fused terminal block -600
1-10V/Fused terminal block -700
PRODUCT CODE LIGHT SOURCE/DESCRIPTION (NOM) DIMENSIONSA B C CUTOUT
TAMPA dL
EL-SAT-118-B04-___ 1x18W 200 200
EL-SAT-218-B04-___ 2x18W 200 200
EL-SAT-126-B24-___ 1x26W 155 200
nOte : STANdArd COMES WITh 3mm CLEAr POLyCArBONATE dIFFUSEr.
73
147
220
293
1
TAMPA 2x18W | LOr 60%
N18226
IP44 IK10+
www.eaglelighting.com.au 114
< contents
discOvery sPace led rObust Perfect for vandalism prone circulation areas
LED IP65 IK10+
TECHNICAL INFORMATION
discovery Space robust LEd features a tough aluminium housing making it suitable for high vandalism prone areas.
The luminaire fits tightly against the ceiling or wall and can be supplied with integral motion detection making an excellent energy saving alternative for use in stairwells, corridors and perimeter walkways.
IP 65 | IK 10
A
B
N18226
PRODUCT CODE LIGHT SOURCE/DESCRIPTION (NOM) DIMENSIONSWATTAGE LUMINOUS
FLUX A B C
dISCOVEry SPACE LEd rOBUST
57703 + 93381 3000K White 11 600 124 414
57704 + 93381 3000K White 20 1150 124 414
57704-357 + 93381 3000K White E-sense detect 20 1150 124 414
www.eaglelighting.com.au 115
< contents
buccaneer rOund An extremely sturdy oyster fitting for ceiling or wall mounting in custodial applications
LED IP65 IK10+
TECHNICAL INFORMATION
Buccaneer is an extremely sturdy oyster fitting for ceiling or wall mounting.
This energy efficient LEd luminaire was originally developed for correctional and psychiatric institutions but is regularly used in schools and public housing as well.
The fully overlapping injection moulded diffuser and tamperproof screws, prevents anything from being tied around or attached to the luminaire.
IP 65 | IK10/150 J
N18226
PRODUCT CODE LIGHT SOURCE/DESCRIPTION (NOM) DIMENSIONSWATTAGE LUMINOUS
FLUX A B C
dISCOVEry SPACE LEd rOBUST
dP-BUC-410644 4000K White 16.5 1004 100 365
www.eaglelighting.com.au 116
< contents
N18226
STAINLESS STEEL CLIPS dIFFUSEr CLOSE UP
TECHNICAL INFORMATION
PRODUCT CODE LIGHT SOURCE/DESCRIPTION (NOM) DIMENSIONSW LUMINOUS
FLUXEFFICACy
LM/W A B C d
dENSUS LEd SUrFACE MOUNTEd
EL-dENL-1102-___ Polycarbornate 2600LM 4K 20.5 2600 113 680 150 100 383
EL-dENL-1105-___ Polycarbornate 3400LM 4K high Output 29.5 3400 113 680 150 100 383
EL-dENL-1100-___ Polycarbornate 3200LM 4k 24.0 3200 113 1280 150 100 872
AVAILABLE IN EMErGENCy:
EL-dENL-1103-___ Polycarbornate 5200LM 4K 40.0 5200 113 1280 150 100 872
EL-dENL-1106-___ Polycarbornate 6800LM 4K high Output 58.0 6800 113 1280 150 100 872
vARIATION SUFFIx
Standard -000
dSI/STd terminal block -100
dALI/STd terminal block -200
Standard/Fused terminal block -400
dSI/Fused terminal block -500
dALI/Fused terminal block -600
STd Maintained, Non Monitored EMG -800
STd Maintained, dALI Monitored EMG -801
IES INDOOR REPORTPHOTOMETRIC FILENAME : EL-DENL-1103-000.IES
POLAR GRAPH
288
577
865
1153
1
2
3
Maximum Candela = 1153.13 Located At Horizontal Angle = 0, Vertical Angle = 0# 1 - Vertical Plane Through Horizontal Angles (0 - 180) (Through Max. Cd.)# 2 - Vertical Plane Through Horizontal Angles (90 - 270)# 3 - Horizontal Cone Through Vertical Angle (0) (Through Max. Cd.)
Photometric Toolbox Professional Edition - Copyright 2002-2011 by Lighting Analysts, Inc.Calculations based on published IES Methods and recommendations, values rounded for display purposes.Results derived from content of manufacturers photometric file.
Page 6
densus ledA surface mounted IP65 rated adverse location luminaire ideally suited for most commercial and industrial applications
The densus LEd is a weather proof, vandal resistant and dust proof IP65 rated LEd luminaire, suitable for most commercial and industrial applications.
It is particularly suited for underground carparks, where its wide beam distribution ensures that it provides excellent uniformity and illuminance levels on maximum mounting centres.
The LEd boards used within the densus LEd are easily replaceable, allowing for easy maintenance and a reduced life cycle cost. The luminaire has long expected lifetime, meaning that it is ideal for environments where maintenance may be difficult.
By using upgradeable/interchangeable LEd boards in the luminaire, you can rest assured that you will always be able to easily replace or upgrade the densus to take advantage of the latest available LEd technology and energy savings.
OPtiOns
+ Emergency
+ dALI Monitored Emergency
+ Microwave Motion / Light Sensor
MOUNTING CENTrES
A D
C
B
TECHNICAL SPECIFICATIONS
Total Luminaire Efficacy minimum > 113lm/W
MacAdam 3 SdCM (initial)
CrI > 84
Lifetime L70(6k)/F10/100,000hrs
LLMF L90(6k) <36,000hrs L92(6k) 30,000hrs
Passive cooling
System guarantee 5 years
LED IP65 IK10
EMERGENCY CLASSIFICATIONS
EL-dENL-1103-800: C0/d100 C90/d40 Test report: LL17141
EL-dENL-1106-800: C0/d100 C90/d40 Test report: LL17973
www.eaglelighting.com.au 117
< contents
TECHNICAL INFORMATION
PRODUCT CODE LIGHT SOURCE/DESCRIPTION (NOM) DIMENSIONSA B C d
dENSUS G2 SUrFACE MOUNTEd
EL-dEN- 114-100-___ 1 x 14W 665 93 100 305
EL-dEN- 214-100-___ 2 x 14W 665 140 100 305
EL-dEN- 128-100-___ 1 x 28W 1270 93 100 904
EL-dEN- 228-100-___ 2 x 28W 1270 140 100 904
EL-dEN- 154-100-___ 1 x 54W 1270 93 100 904
EL-dEN- 254-100-___ 2 x 54W 1270 140 100 904
dENSUS G2 SUrFACE MOUNTEd EMErGENCy
EL-dEN- 228-100-800 2 x 28W Emergency 1270 140 100 904
Emergency Classification: C0/d50/C90/d20/C180/d63Based on Tridonic Atco EM 35B Basic (Test report LL13320 and LL093430IT)
dENSUS G2 TITAN SUrFACE MOUNTEd
EL-TTN-135-100-___ 1 x 35W 1600 130 112
EL-TTN-235-100-___ 2 x 35W 1600 186 112
The densus G2 Titan 1x35W and 2x35W come only with polycarbonate clips
dENSUS G2 TAMPErPrOOF KITS
EL-ACC-dEN-TMP-000 Single
EL-ACC-dEN-TMP-001 Twin
vARIATION SUFFIx
Standard -000
dSI/STd terminal block -100
dALI/STd terminal block -200
1-10V/STd terminal block -300
Standard/Fused terminal block -400
dSI/Fused terminal block -500
dALI/Fused terminal block -600
1-10V/Fused terminal block -700
OPTIONAL TAMPEr rESISTANT SCrEWSSTAINLESS STEEL CLIPS
47
93
140
187
1
densus g2A surface mounted IP65 rated adverse location luminaire ideally suited for most commercial and industrial applications
The densus G2 is a weather proof, vandal resistant and dust proof IP65 rated luminaire, ideally suited for most commercial and industrial applications.
It is particularly suited for underground carparks, where its wide beam distribution ensures that it provides excellent uniformity and illuminance levels on maximum mounting centres.
The vandal resistant luminaire is fitted with stainless steel clips and tamper proof screws as an optional extra.
MOUNTING CENTrES
dENSUS G2 1x28W | LOr 88%
N18226
IP65
A D
C
B
www.eaglelighting.com.au 118
< contents
nite cell lamPA recessed, tamper proof and impact resistant fitting for custodial applications
rECESSEd MOUNTING TAMPErPrOOF SWITCh
PRODUCT CODE LIGHT SOURCE/DESCRIPTION (NOM) DIMENSIONSA B C
NITE CELL LAMP LEd
EL-NCLL-514000-0 LEd 750LM 4K NITE CELL LAMP C/W TAMPEr PrOOF SWITCh
365 165 95
NITE CELL LAMP FLUOrESCENT
EL-NCL-109-500-000 1X9W PL NITE CELL LAMP C/W TAMPEr PrOOF SWITCh
365 165 95
EL-NCL-113-500-000 1X13W PLC NITE CELL LAMP C/W TAMPEr PrOOF SWITCh
365 165 95
ACCESSOrIES
EL-ACC-NLS-000 CONCrETE SKIN TO SUIT NITE CELL LAMP
The Nite Cell Lamp is specific reading light, designed to be both tamper-proof and impact resistant. Applications for this luminaire include correctional facilities, prison cells, and areas where a tamper-proof fitting of this nature is required.
The fascia of the fitting is constructed using stainless steel and incorporates a tamper proof mechanical switch and countersunk tamperproof screws.
N18226
TECHNICAL INFORMATION
Tamper proof mounting screws
A
B
www.eaglelighting.com.au 119
< contents
TECHNICAL INFORMATION
Uni-Cell is an extremely robust, anti-ligature luminaire for police and custodial applications.
The fitting is designed for cornice mounting to provide the perfect distribution for cell applications whilst being specifically engineered to ensure the safety of both the occupants and the staff.
IP 65 | IK10/150 J
C
B
A
N18226
uni-cell An anti-ligature luminaire for police and custodial applications
IP65 IK10+
PRODUCT CODE LIGHT SOURCE/DESCRIPTION (NOM) DIMENSIONSA B C CUTOUT
UNI-CELL
dP-PC3-410646 1 x 49W T5 White 1700 250 250
dP-PC3-410647 2 x 49W T5 White 1700 250 250
www.eaglelighting.com.au 120
< contents
TECHNICAL INFORMATION
VANdAL PrOOF SCrEWS
vARIATION SUFFIx
Standard -000
dSI/STd terminal block -100
dALI/STd terminal block -200
1-10V/STd terminal block -300
Standard/Fused terminal block -400
dSI/Fused terminal block -500
dALI/Fused terminal block -600
1-10V/Fused terminal block -700
PRODUCT CODE LIGHT SOURCE/DESCRIPTION (NOM) DIMENSIONSA B C
VANGUArd SUrFACE MOUNTEd
EL-CV822-114-100-___ 1 x 14W T5 665 210 85
EL-CV822-214-100-___ 2 x 14W T5 665 210 85
EL-CV822-214-101-___ 2 x 14W T5 C/W 9W Nightlight 665 210 85
EL-CV824-128-100-___ 1 x 28W T5 1275 210 85
EL-CV824-228-100-___ 2 x 28W T5 1275 210 85
EL-CV824-228-101-___ 2 x 28W T5 C/W 9W Nightlight 1275 210 85
44
87
131
175
1
C
A
B
vanguardA surface mounted, vandal proof luminaire for most secure area industrial and commercial applications
The Vanguard range of luminaires is suitable for industrial and commercial areas where security and visibility are of paramount importance at all times.
Applications include perimeter soffit lighting around stores and supermarkets, correctional institutions, prison cells, mental health facilities, subways, underpasses and any areas where a robust, vandal proof fitting is required. Approved for prison use ‘non-ligature’ fitting.
Vanguard features a one piece, injection moulded polycarbonate diffuser that provides excellent lamp obscuration, wide light distribution and good glare control.
The luminaire has a reinforced hidden back plate, tamperproof stainless steel retaining screws and its construction ensures that it is virtually vandal proof.
OPTIONS:
+ Emergency
+ LEd night light
VANGUArd 2x28W | LOr 71%
N18226
IP44
www.eaglelighting.com.au 121
< contents
TECHNICAL INFORMATION
Monitor is a high impact fixture for general lighting that can be mounted on the wall or ceiling.
Typical uses include various types of arrival halls, passageways, stairwells and amenity areas.
The optic has a lined prismatic underside that distributes light effectively without introducing glare to the environment.
IP 65 | IK10/150 J
C
B A
N18226
mOnitOr A surface mounted anti-ligature luminaire
IP65 IK10+
PRODUCT CODE LIGHT SOURCE/DESCRIPTION (NOM) DIMENSIONSA B C CUTOUT
MONITOr
dP-d855-410645 1x14W White 640 117 89
dP-d855-410655 1x14W Alumium Grey 640 117 89
www.eaglelighting.com.au 122
< contents
quadriga Surface mounted vandal and weather resistant bulkhead luminaire
LED IP65 IK10+
TECHNICAL INFORMATION
Quadriga has been designed as an architectural fitting that provides outstanding performance against vandals and extreme weather.
It is equipped with the latest LEd technology for energy efficiency and maintenance freedom.
The Quadriga can be wall or ceiling mounted with allowances for surface conduit entry where required.
It is the perfect fitting for a wide range of applications such as train stations, prisons and pedestrian tunnels.
IP 65 | IK16/150 J
N18226
PRODUCT CODE LIGHT SOURCE/DESCRIPTION (NOM) DIMENSIONSWATTAGE LUMINOUS
FLUX A B C
QUAdrIGA LEd
dP-dr-410625 4000K Anthracite 16.5 1061 155 300
dP-dr-410641 4000K Black 16.5 1061 155 300
www.eaglelighting.com.au 123
< contents
quadrant Surface mounted vandal and weather resistant bulkhead luminaire
LED IK10+
TECHNICAL INFORMATION
Quadrant is a vandal and weather resistant bulkhead fitting suitable for wall or ceiling mounting.
Widely specified for external public housing and education applications its streamline nature and architectural size belies the Quadrant’s output and efficiency.
IP 54 | IK10/100 J
C
B
A
N18226
PRODUCT CODE LIGHT SOURCE/DESCRIPTION (NOM) DIMENSIONSWATTAGE LUMINOUS
FLUX A B C
QUAdrANT
dP-dQ-410648 4000K Anthracite 16.5 1050 254 254 95
dP-dQ- 410664 4000K Black 16.5 1050 254 254 95
IP54
www.eaglelighting.com.au 124
< contents
quantum Surface mounted vandal and weather resistant bulkhead luminaire
LED IP65 IK10+
TECHNICAL INFORMATION
Quantum is a wall mounted bulkhead fitting equipped with the latest LEd technology to optimize energy efficiency and deliver maintenance freedom.
The high impact resistant opal diffuser, held within a hooded casting, distributes the light evenly towards the ground and reduces upward waste-light.
It is suitable for installations in public housing, perimeter lighting, pedestrian tunnels and custodial applications.
IP 65 | IK10/150 J
B
B
A
N18226
PRODUCT CODE LIGHT SOURCE/DESCRIPTION (NOM) DIMENSIONSWATTAGE LUMINOUS
FLUX A B C
QUANTUM
dP-QTM-410624 4000K Anthracite 16.5 570 145 300
dP-QTM-410640 4000K Black 16.5 570 145 300
www.eaglelighting.com.au 125
< contents
PantheOn A wall mounted luminaire for vandal and weather resistant applications
LED IP65 IK10+
TECHNICAL INFORMATION
The Pantheon is a vandal and weather resistant luminaire for exterior wall applications.
The aluminium reflector and control lens provides efficient and even distribution, increasing the spacing ratios whilst still providing excellent visual comfort.
The choice of both metal halide and LEd solution ensures flexibility to meet the demands of many applications including perimeter lighting, public housing and custodial applications.
IP 65 | IK10/100 J
C
B
A
N18226
PRODUCT CODE LIGHT SOURCE/DESCRIPTION (NOM) DIMENSIONSWATTAGE LUMINOUS
FLUX A B C
PANThEON Mh
dP-d277-410628 70W, Anthracite 330 355 205
dP-d277-410643 70W, Black 330 355 205
PANThEON LEd
dP-d277-410627 4000K Anthracite 28 1704 330 355 205
dP-d277-410642 4000K Black 28 1704 330 355 205
www.eaglelighting.com.au 126
< contents
LED IP65 IK10+
TECHNICAL INFORMATION
A timeless design combined with the latest LED technology makes Rondo G2 the perfect choice for lighting the exterior of government buildings, offices and schools.
Rondo G2’s narrow mounting plate and projection from the wall enables it to solve many of the difficult problems often posed by site constraints.
IP 65 | IK10
CA
Ø D
B
N18226
PRODUCT CODE LIGHT SOURCE/DESCRIPTION (NOM) DIMENSIONSWATTAGE LUMINOUS
FLUX A B C D
RONDO G2 POWER WALL
FG-303091 3000K Anthracite Wide 24 1781 291 273 171 184
FG-303116 4000K Anthracite Wide 20 1645 291 273 171 184
RONDO G2 WALL MOUNTED Wall mounted LED downlight for exterior applications
www.eaglelighting.com.au 127
< contents
LED IP65 IK10+
TECHNICAL INFORMATION
Rondo G2 Recessed manages to combine high efficiencies, through the use of latest LED technology, with an outstanding level of visual comfort.
This, along with a wide beam distribution and an IK10 rating, makes Rondo G2 the perfect choice for mounting into lower ceiling heights of any vandalism prone exterior facility.
IP 65 | IK10
A
B
Cutout
C
N18226
PRODUCT CODE LIGHT SOURCE/DESCRIPTION (NOM) DIMENSIONSWATTAGE LUMINOUS
FLUX A B C Cutout
RONDO G2 RECESSED
FG-303129 3000K Anthracite Wide 24 1781 132 202 2.5 174
FG-303156 4000K Anthracite Wide 20 1645 132 202 2.5 174
RONDO G2 RECESSED Recessed LED downlight for exterior applications
www.eaglelighting.com.au 128
< contents
iP65 rated tamPerPrOOfLEd downlight
TECHNICAL INFORMATION
PRODUCT CODE DESCRIPTION (NOM) DIMENSIONSA B C CUTOUT
IP65 FITTING ONLy
LC-IP115-Wh WhITE 85 30 65
A
B
CUTOUT
N18226
SIdE VIEW TAMPErPrOOF
A compact downlight with a CN50 LEd lamp, supplied with a remote mounted electronic transformer or driver.
The fixture is fully sealed from below and is ideal for small to medium areas where moisture or steam is present.
Applications include toilets, shower areas, bathrooms and retail food areas where hosing down of areas may occur.
OPtiOns
+ Tamperproof version
LED IP65
www.eaglelighting.com.au 131
< contents
projects
www.eaglelighting.com.au 132
< contents
1 o’connell street SYDNEY. NSW
project
Project managers, TR Group were given the task to transform a 35-floor building in the centre of the Sydney CBD into a quality A-grade rated building. They were looking specifically for a premium Australian manufactured product to suit the new CSR/ Fricker recessed, ceiling grid model based on a 1400x1400 ceiling tile. The fitting also had to be a highly efficient direct/indirect recessed solution.
Eagle Lighting Australia, put forward the Fagerhult Indigo Combo series to be custom manufactured out of our Melbourne facility. As our flagship luminaire providing high visual comfort and a optimum efficiency with a unique low brightness louvre, The INDIGO Combo Beta was the best solution. Once detailed drawings and 3D renders were created and approved, a sample luminaire was made.
The outstanding performance of the Indigo Combo Beta allowed for fewer luminaires to be used in this project, substantially reducing the energy and cooling costs. A lifecycle cost calculation performed on a single floor revealed cost savings of over $24,000 based on a ten-year timeframe. If replicated over 35 floors of this project, savings in excess of $840,000 were calculated.
TR Group are extremely pleased with the end result and believe that the quality of the floor can be attributed to the ambience of the lighting.
www.eaglelighting.com.au 133
< contents
projectKInG st WHArF SYDNEY. NSW
Does this award-winning building at 1 Shelly Street in Cockle Bay look familiar? If it does, then its quite likely you’ve seen this unique project in more than a few recent television adverts, including campaigns for the Ford Fiesta and Youi insurance.
This instantly recognisable 35,000m² building consists of a single retail level and ten levels of A-grade commercial office space in the heart of Sydney.
The external diagonal steel structural system sits beyond the building’s sleek, glass facade, eliminating the need for perimeter columns and maximising the quantity and flexibility of the internal floor space. The diagrid pattern was chosen for ease of fabrication and erection, while the simple internal steelwork comprises standard universal beams with regular penetrations for services.
1x28W Fagerhult Multifives were chosen as the base building luminaire. Other areas were highlighted with accent or feature lighting.
MultifivES proviDE thE loW glarE ‘livablE’ light that thE architEct aND lightiNg DESigNEr WErE StriviNg for.
A lighting control system was implemented throughout the project making the use of lighting within the building ‘user friendly’ and helping to provide the 6-star Green Star rating required. The fittings exceeded the energy efficient targets originally expected, achieving 1.58W/m2/100lux and an overall power density of just over 5W/m².
www.eaglelighting.com.au 134
< contents
123 AlBert street briSbaNE. QlD
project
In a first for the city of Brisbane, 123 Albert St was built with the aim of being the first premium-grade, 6-star Green Star office high rise. This addition to the city skyline, was seen as the physical embodiment of its developers approach to future proofing their properties for the demands of a progressive generation of commercial tenants.
123 Albert Street has been designed to deliver the highest levels of efficiency for any tenants in the Brisbane market looking for long-term cost effectiveness in any future business.
Through attention to detail, use of the highest quality materials and advanced technologies,123 Albert Street is viewed as a supreme working environment.
Eagle Lighting Australia has supplied over 2500 Fagerhult Multifive luminaires across Albert Street’s seamless design encompassing 26 levels of office space, eight levels of car parking and a broad light-filled ground floor reception area.
The Fagerhult Multifives were manufactured at our Melbourne production facility, again demonstrating the importance of our part in the Fagerhult Group.
www.eaglelighting.com.au 135
< contents
projectBHp BIllIton pErth. Wa
With a total of 47 floors and height approaching 250m, the new City Square is a bold commercial development in the centre of the Perth business district. Reflecting the latest thinking in corporate workplace design and facilities, the centrepiece of the development is a tower which will be the new home for BHP Billiton in Western Australia.
The precinct is set to become the new mecca for living, working and shopping. Heritage buildings along the St Georges Terrace frontage give prominence to the development and will be occupied for commercial and retail purposes as well as new concepts in restaurants, bars and coffee shops.
Currently under construction by Brookfield Multiplex (also the building owner), the City Square Project is set to dominate the West Australia skyline for years to come.
EaglE lightiNg auStralia, iN partNErShip With hi lightiNg iN pErth, SuppliED a total of 10,000 fagErhult 1x28W MultifivE luMiNairES, aS WEll aS aDDitioNal fagErhult plEiaD g2 DoWNlightS
The Fagerhult Multifive incorporates an Australian designed ‘plug and play’ soft wiring system that enable the control of the DSI ballasts. An integrated air handling register incorporated into the luminaire ensures the ceiling remains uncluttered.
www.eaglelighting.com.au 136
< contents
rAct hobart. taSMaNia
project
This project near the Hobart CBD serves to illustrate the effective partnerships between Eagle Lighting Australia and its distributors, in this case, Southern Lighting and Distribution.
This 4.5 star NABERS rated project, Southern Lighting met the brief set by engineers SEMF to provide an energy-efficient, low glare lighting solution that effectively lit the working plane from a recessed position, high in the ceiling void.
With a high amount of glass within the upper storey, particular consideration was given to the fittings luminance control.
thE fagErhult MultifivE baSic bEta WaS choSEN for thiS projEct baSED oN itS SupErior light coNtrol aND DiStributioN, WhilSt alSo proviDiNg EffEctivE ShiElDiNg to thE high output (ho) t5 laMpS.
The end result of this project fulfilled the performance requirements on the working plane as well as delivering a glare free environment to the occupants. The added diffused brightness emitted from Fagerhult’s R5 Beta louvre also helped create a bright impression for the ceiling that enhances the feeling of size and brightness within the space.
www.eaglelighting.com.au 137
< contents
www.eaglelighting.com.au 138
< contents
385 BoUrKe street MElbourNE. vic
project
385 Bourke Street, Melbourne consists of a 41 floor office tower and the twin-level retail complex known as Galleria. The Galleria is showcased underneath a high glass ceiling, bringing natural light to the main shopping mall, which has a range of food, service and specialty shops.
The client requested a Greenstar lighting design for the seven floors they were about to occupy with specifications on Lighting Power Density (ENE-3) and Electric Lighting Levels (IEQ-7). The design aimed to achieve less than 2.0W/m²/100 lux for ENE-3, and for IEQ-7, with no more than 5% of calculation points above 400 lux. As part of the design, it was integral that all AS1680 recommendations on glare were adhered to.
Meeting all the requirements of this project, was the Fagerhult 3x14W Multifive Basic Beta with return air. Why this fitting? Simply, this particular variant of the Multifive luminaire features excellent reflection characteristics courtesy of the Beta R5 louvre with double-parabolic reflector, complemented by the top reflector to maximise light output. In the formative stages of the project our Engineering and Production teams worked to ensure the return air slots on the fitting matched with the air boots on site prior to manufacture.
On completion, the approved design delivered the Greenstar rating requested, gaining two points for meeting the low energy use figure, and an additional point for having no more than 5% of the calculation points exceeded 400lux.
With the industry focussed on squeezing the greatest amount of energy possible out of a space while reducing the footprint, it proves that a luminaire like the Multfive Basic Beta can evolve and deliver as these changes come about, without having to sacrifice on the visual comfort and experience of the occupant.
www.eaglelighting.com.au 139
< contents
project240 QUeen street briSbaNE. QlD
Currently home to the Commonwealth Bank of Australia, the brief was for a complete refurbishment and to raise the NABERS rating of this iconic piece of Brisbane’s desirable ‘Golden Triangle’.
The specifics of this project were for new fittings to provide improved energy savings over previous installations whilst providing return air. The building managers sourced a luminaire that would be reliable while enhancing the high-profile image of the building. The Fagerhult 25W Multifive Air luminaire was the perfect fit for this project.
With the high light output ratio (LOR) coupled with the 25W, T5 lamp. The Multifive Air achieves an energy saving of over 6.5kW per floor from approximately 140 fittings. Slots on the 1200x300 luminaire body supply air from the existing duct work.
With a fivE YEar liMitED WarraNtY oN thE ballaStS thErE WaS aDDitioNal pEacE of MiND for thE facilitY MaNagErS.
To date the installation of the first eight floors have been completed including three levels for the Australian Securities and Investments Commission. Close working relationships between Facility Managers, Engineers and Contractors meant unnecessary delays were avoided to ensure quick turn-around of orders. Over the following twelve months the remaining floors will be finished as they are made available by existing tenants.
www.eaglelighting.com.au 140
< contents
67 eppInG roAD SYDNEY. NSW
project
ING Real Estate’s latest development is the distinctive City Views Business Park on Epping Road, North Ryde. This stylish property is a 6,222m², five-level office building with substantial exposure. Incorporated in the design is a striking glazed office facade.
Designed as part of a master plan to redevelop and replace existing buildings onsite. This first development, ‘Building A’ has been constructed to meet a 4.5 star NABERS Design Rating V2.
Inclusions as part of the energy and lighting requirements on this project were for a high-frequency ballast to assist in worker comfort, lighting levels were designed to be maintained at no more than 400 lux for 95% of Net Lettable Area (NLA) on the working plane, lighting power densities were specified as 2.0W/m²/100 lux.
To meet these specifications VOS Group Engineers chose the Enviro luminaire in a 1x28W lamp configuration. The decision to utilise this particular luminaire was based on a number of key factors, the luminaires performance, and equally the cost effectiveness of the Enviro.
The ‘perfo’ basket and indirect/direct design of the fitting provided the feeling of space over the large floor plan and assisted in preventing the cavernous effect that can be an unwelcome consequence of using a generic low-brightness louvred lighting option. Selecting a luminaire with a large luminous opening complements the overall feeling of space and offsets the effect of the dark carpet.
www.eaglelighting.com.au 141
< contents
projectUnIVersItY HospItAl golD coaSt. QlD
The new Gold Coast University Hospital is the largest public health infrastructure project currently underway in Australia. The $1.76 billion project, due for completion in 2012, will deliver a brand new 750-bed hospital and health services for residents on the Gold Coast.
Located on the corner of Parklands Drive and Olsen Avenue, Southport, the hospital will also be one of Queensland’s largest clinical teaching and research facilities, providing specialised health services that meet the needs of patients and the learning requirements of students.
Following some outstanding work from the Eagle Lighting Australia team in Brisbane, ELA was able to secure an order for this multi-million dollar health project in Queensland. Our manufacturing facility will be working hard in the coming months to supply an assortment of Cleanroom, Flexitroffer, Multifive, and Indigo luminaires onto this project.
ELA’s Cleanroom luminaire was selected based on a number of attributes including its strength of design and versatility. Cleanrooms IP rating and high LOR were an instrumental factor in ensuring cost-savings over the entire lifecycle.
www.eaglelighting.com.au 143
< contents
technical information
www.eaglelighting.com.au 144
< contents
LED luminaires are an ideal replacement for both downlights and T5 solutions.
In public environments, such as offices and schools, LED technology has previously only been used for more decorative-style lighting – accent lighting or colour-shifting effects. In these contexts, LED has replaced previous low-voltage halogen light sources. Now LED technology has achieved sufficient quality, energy efficiency and life span to surpass traditional solutions for general lighting as well.
LED luminaires can replace both downlights and previous T5 applications in places such as corridors, offices, entry halls and conference facilities. New reflector and anti-glare technology allow the luminaires to make use of the huge light flows offered by LED while still making it comfortable for people to be in the room. Examples include Fagerhult’s downlight series Pleiad G3 and the recessed general lighting system Multilume Flat.
In addition to general and accent lighting, LED technology also has a place in specific environments. LED is often the preferable light source for works of art, museum artefacts or food products, as the light does not contain UV or IR radiation that can cause degradation.
Regardless of environment, LED is superior in contexts where you want to save on labour and expenses associated with maintenance.
Luminaire design also benefits from LED technology, in particular because of the small dimensions of the modules. Because an LED luminaire is not limited by the shape of the light source and does not require a certain volume for a fluorescent tube, designers have unlimited freedom to create exciting new designs.
With modern technology, an LED luminaire developed specifically for a given purpose can replace several luminaire types with traditional light sources – from downlights with low-voltage and halogen light sources to general lighting with T5 fluorescent tubes. The LED solution retains or improves the energy efficiency – but the goal should also be to maintain control over visual comfort and direction. This is particularly important in connection with work-related facilities that are extra sensitive to glare, for example offices.
However, it is clear that greater efficiency, lower prices and better applications of the technology will contribute to steadily growing demand for LED luminaires for public environments. It is not unreasonable to assume that LED lighting will dominate sales in ten years or so.
One phase in Fagerhult’s further development of this technology is research into how people perceive LED lighting. Indications that LED light is perceived as brighter than traditional light sources at the same power levels lead to thoughts about opportunities for even more energy savings.
The company is also working to develop even more applications for general and work space lighting, which can replace luminaires with T5 fluorescent tubes. A joint standardisation project called Zhaga is under way in the lighting industry. The aim is to develop common product standards for physical dimensions and connections to electrical, photometric and thermal product standards. The project is mainly about making it easier to replace LED modules and electrical ballasts. The first standardised modules are expected to be available in 2011.
Greater efficiency, lower prices and better applications of the technology will contribute to steadily growing demand for LED.
why use ledsINTRODUcTION
Eagle Lighting Australia, as a member of the Fagerhult Group of companies is one of the founding members of Zhaga. Zhaga is an industry wide cooperation between companies aimed at enabling the interchangeability of LED light sources made by different manufaturers. Interchangeability is achieved by defining interfaces for a variety of application specific light engines.
www.eaglelighting.com.au 145
< contents
the light quality of ledsINTRODUcTION
Many factors affect the light quality of LED. colour temperature, colour rendition and colour quality affect both how the light works and how it is perceived. Although the technological
properties of LED’s and traditional light sources are not directly comparable, the user’s demands for how the light from a good luminaire should behave, remains unchanged.
www.eaglelighting.com.au 146
< contents
the light quality of ledscOLOUR RENDITION
colour rendition of LED’s is normally given as a colour Rendering Index (cRI) or Ra. The Ra scale is from 1 to 100 and measures the capacity of the light source to render colours. A high Ra often produces a somewhat lower efficiency so an assessment must be made around what is more critical to the project.
The colour Rendering Index (cRI) is given as an average value (Ra) across 8 or 14 colours. An 8 scale test features pastel colours and is a poor indicator of colour rendering ability, particularly saturated colour. A cRI (14) test is preferred, however, a cRI (14) test can still see an LED rendering thirteen colours well but not so good at the fourteenth. The diagram below is a good example where, despite the LED rendering red poorly, it still scores a cRI (8) of 85 and a cRI (14) of 80. Because of these flaws in the cRI system, there are currently other systems of measurement under investigation. One such system is the colour Quality System (cQS) where scores are still given out of 100 but the colours used as a reference are all saturated and the formula to derive at the figure more detailed.
Whilst colour rendition will vary among different LEDs, it is directly linked to the spectral distribution of the LED. Therefore, an analysis of the spectral distribution can give us more information about the LED’s ability to reproduce colours. The more a particular colour is present in the spectral distribution, the better the LED at rendering that colour. It is also worth noting that colour rendition can differ between a new LED and one that has been in use for several thousand hours.
colour rendering checKlist
Always make sure the quoted Ra is from a cRI(14) test.
Look at the spectral distribution when colour rendering is important. Are the colours you are trying to illuminate present in the LED?
www.eaglelighting.com.au 147
< contents
the light quality of ledscOLOUR TEMPERATURE & QUALITy
ansi white
The colour temperature of a white light source is given in Kelvin (K). Originally, Kelvin was a measure of the colour of a heated (and therefore glowing) black body.
For lamps with a filament, this measure is easy to apply, as the colour temperature in Kelvin is the same as the actual temperature of the filament. For light sources with no filament– such as fluorescent tubes, gas discharge lamps and LEDs – we must calculate a correlated colour temperature (ccT) in Kelvin.
colour temperature may vary from one manufacturer to another, even if they report the same measurement. In addition, the colour temperature of an LED can change over time, which means that the value after several thousand hours of use will not be the same as that of a new LED- see the chromaticity section for more information.
LED manufacturers sort their products into ‘bins’ according to their performance. As highlighted on the ANSI standard binning chart diagram, there are 16 bins around 3500K.
A 3500K LED taken from the top left quadrant will appear greenish when compared to one from the bottom right quadrant that will have a pinkish hue. Interestingly, we often see manufacturers using LED’s with a greenish hue as these are often more efficient.
Even though there is an ASNI standard, two opposite corners within a bin can also appear to be different. For this reason, many manufactures will sub categories into smaller bins again to improve the colour consistency. The fewer bins your LEDs are selected from, the more stable the quality of the product.
One of the emerging trends to deal with colour temperature issues is remote phosphor technology. By using naturally grown blue LEDs and mixing the light in a chamber before it reaches the phosphor, manufacturers can produce LEDs of consistent colour.
This reduces many of the issues of colour shift over time, that are associated with traditional phosphor covered LED’s, there are also constant tuning LED solutions, where constant feedback
from the LED board sees the LEDs adjusted accordingly to keep the colour temperature stable, not just initially, but for the life of the LED board. This type of solution does require the use of additional built in electronic components, however, and hence can be prone to higher failure rates.
Remember, there is no substitute for looking at the LED itself and making your own assessment of it’s colour temperature and colour quality.
colour temPerature checKlist LED’s that are as close to the Black Body Locus as possible will produce a more natural feel. Are the LED’s centered to the BBL? Is the LED from a quality manufacturer who utilize ‘sub’ binning or other quality control measures?
www.eaglelighting.com.au 148
< contents
the light quality of ledscHROMATIcITy
chromaticity needs to be considered when the LED colour is easily referenced. For instance, lighting a white surface, or placing an LED strip very close to a white wall.
The chromaticity of an LED product – that is, the degree of deviation of its colour point – can be defined in MacAdam ellipses in Standard Deviation of colour Matching (SDcM) as per the cIE 1964 standard.
The MacAdam system originates from the United States and ranks colour consistency on a scale of 0 to 10. The image to the right shows what MacAdam ellipses look like at 3000K. The image below shows what value variation that equates to in terms of colour temperature and chromaticity co-ordinates.
One other consideration is how the colour quality of a product changes throughout its lifespan. Most SDcM values are initial values and the quality of the LED plays a huge part in how much deviation will be experienced over the life of the LED.
chromaticity checKlist
Will the LED be in a high reference area i.e. along a white wall, gallery area where consistency is imperative? 1-2 SDcM’s
Is this an area where reference is possible, but not critical i.e. Most indoor environments. 3- 5 SDcM’s
Will the area offer very low chance of reference? i.e. Outdoor environments, brick walls. 5- 7 SDcM’s
ccT RANGE
SDcM 3000K ΔUV
1x ±30K ±0.0007
2x ±60K ±0.0010
4x ±100K ±0.0020
7-8x (1) ±175K 0.0060(1) Ansi-Nema c78.37377-2008
www.eaglelighting.com.au 149
< contents
to only 50,000 hours at 10% failures. In many cases this will primarily drive the ultimate life of the LED luminaire.
led lifetime checKlist
Is the lifetime data from the luminaire itself, not the LED?
Does the Lamp Lumen Maintenance Factor being employed in the design corresponds to the quoted life of the LED luminaire?
Are adequate maintenance documents in place to ensure the LEDs are replaced at the end of life (when the lumens fall below what the project requires)?
An LED luminaire can have a very long life span – assuming that it is well-designed and has high-quality components. An LED very rarely breaks although, as with any electronic products, there is a normal failure rate. Rather than breaking, an LED generates reduced light flow over time. Life expectancy is normally defined as the point in time when the lumen output from the LED goes down to 70% of the initial value. 70%, or 30% depreciation, is the normal point where the human eye will start to notice a difference in the lighting levels.
The life span is expressed as L70, followed by the number of hours, i.e. L70 32,000 h. The expected life span is affected by several factors including the choice of LED (manufacturer and type), how hard the chosen LED is run and the luminaires ability to manage the thermal properties of the LED.
It is important to note that at the point in time when an LED luminaire does reach its rated life the LED will not stop working; it will just continue to depreciate in output. For this reason, maintenance and re-lamping periods should be carefully considered and stated. In some instances, it may make sense to quote a shorter maintenance period. For instance, retail fit-outs often get upgraded every 5 to 8 years, we can choose to run the LED harder to get more efficiency and we can also choose a shorter lifetime, enabling us to use a different lumen depreciation, meaning we use less luminaires to achieve our desired lighting levels.
To give an example, if we design with 50,000 hours in mind with the LED in the diagram, we must apply a 0.7 lamp lumen maintenance factor to our design - L70 50,000h. However, if we decided we only required 42,000 hours for our particular project we could use a 0.9 LLMF and state our design as L90 42,000h. This method can only be employed where the luminaire manufactures life time data is available, and is tested to LM-79 standards.
Whatever the stated life and maintenance, we must remember the LED is only one part of the equation. LED drivers and other electronics parts are still commonly rated
lumen maintenance
the light quality of ledsLED LIFETIME
www.eaglelighting.com.au 150
< contents
light sourcesPROPERTIES AND SUMMARy
This section contains a brief summary of the most common light sources contained within this catalogue. The data has been complied from the light source manufacturers catalogues and, consequentially, may vary and be subject to change.
cOMPAcT FLUOREScENT LAMPS
compact fluorescent lamps Tc-L/FSD – Powerful compact fluorescent lamp that allows small luminaires to offer high light outputs. The advantages are: high luminous efficacy, good colour reproduction at several colour temperatures, extended lamp life and dimming options etc.
compact fluorescent lamps FSD/FSQ/FSM/FSS – These are efficient compact fluorescent lamps with 2, 4 or 6 limbs and a 2D design with outputs of up to 120W. These light sources have many advantages such as high luminous efficacy, good colour rendering at several colour temperatures, extended lamp life and dimming options. FSM lamps are also available in different geometric shapes and design characteristics. Amalgam lamps are recommended as they give higher luminous efficacy at high ambient temperatures. Generally there is a higher ambient temperature in small luminaires such as downlights. One limitation with the amalgam lamps is that it takes approximately 5 minutes before reaching full luminous flux. Lamps without amalgam are more suited to outdoor installations as they ignite better and give more light at low temperatures.
FLUOREScENT LAMPS
Fluorescent lamps T5 FDH – These fluorescent lamps Ø=16 mm are adapted in length to fit 600 mm modular ceilings. The lamps are available in two different designs, HE (High Efficacy) with maximum luminous efficacy or HO (High Output) with maximum luminous flux. All outputs in the HE range have the same fluorescent lamp luminance while it varies in the HO range. The fluorescent lamp is designed to give maximum luminous efficacy at an approximate ambient temperature of 35 °c, which corresponds to the normal temperature of an IP 20 luminaire. Always powered by HF-ballasts, they can also be dimmed using dimmable HF-ballasts. (Further information about T5 luminaires and lighting systems can be found in the Technical Information chapter.)
circular fluorescent lamps T5 Fc – Fluorescent lamp Ø=16 mm in three standard sizes and four outputs. Unlike the normal T5 fluorescent lamps, these lamps are designed for an ambient temperature of 25 °c. The lamps are always powered by HF-ballasts.
Fluorescent lamps T8 FD – These Ø=26 fluorescent lamps have a high luminous efficacy, good colour reproduction, several colour temperatures, long lamp life and they can be dimmed.
HALOGEN LAMPS
Halogen lamps 12 V – Available in many different designs and outputs they have many good characteristics, for example, excellent colour reproduction, relatively inexpensive, long lamp life and can be dimmed. All halogen lamps up to 50 W currently used/sold by Fagerhult are of a low pressure type and in UV-block designs. One disadvantage is a relatively poor energy efficiency.
Halogen lamps 240 V – These halogen lamps have the same advantages as normal incandescent lamps, but are more efficient and have a longer lamp life.
Available in outputs up to 250 W. Once again one disadvantage is relatively poor energy efficiency.
METAL HALOGEN LAMPS
Metal halogen lamps MT/MR/MD 35–150 W – These light sources (Mastercolour) are equipped with a ceramic arc tube, which results in a colour temperature shift of less than ±200 K. The light source’s white ‘sparkling light is very similar to the 12 V halogen lamps but offers numerous benefits such as energy efficiency and long lamp life. MT-lamps are in UV-block design. Luminaires with explosion protective glass are required for the MT light source. MR-lamps have an integrated reflector available with different distribution angles and dimensions as well as built-in protective glass.
At the time of printing individual models and certain outputs of metal halogen lamps are available in dimmable versions. These are not presented in the catalogue.
Limitations: Metal halogen lamps cannot generally be dimmed. They have an ignition time of 2–3 minutes. Restart of hot lamps takes up to 15 minutes.
HIGH PRESSURE SODIUM LAMPS
‘White Son’, SDW-T (35–100 W) – The lamp has a colour temperature that lies close to the light from an incandescent lamp and reproduces most colours in an excellent manner. Other advantages are high efficiency and long lamp life.
Limitations: These high pressure sodium lamps cannot be dimmed. They have an ignition time of approx. 4 minutes and the restart of a hot lamp is up to 2 minutes.
Other high pressure sodium lamps normally have a high luminous efficacy in combination with a low colour rendering index.
Limitations: As above.
www.eaglelighting.com.au 151
< contents
light sourcesPROPERTIES AND SUMMARy
LUMINOUS EFFIcAcy
A light source’s luminous efficacy is the relation between its luminous flux and the electrical power used. The luminous efficacy is established for the light source or for the system (light source and ballast). The unit for luminous efficacy is lm/W. Note that the documented value for the luminous efficacy in the tables on the following pages applies to the light source and does not take ballast losses into consideration.
AVERAGE MORTALITy RATE
The number of burning hours after which half of a large number of controlled light sources have extinguished. Used for incandescent and halogen lamps.
80 % SERVIcE MORTALITy RATE
The time after which 80 % of the lighting installation’s original luminous flux remains. The depreciation in luminous flux depends on the reduction in light output as well as spent light sources.
GENERAL cOLOUR RENDERING INDEx, RA
colour rendering is a measurement of the light source’s ability to correctly render eight test colours in relation to a fixed reference light. The Ra-index for indoor lighting ought to be above 80 and for good colour rendering above 90. The value for maximum colour rendering is defined as 100.
cOLOUR TEMPERATURE, K
The colour temperature denotes the light source’s colour appearance and varies in the range 2000–7400 K. 3500–4000 K is considered to be neutral white. colour temperature lower than 3500 K is experienced as warm and colour temperatures higher than 4000 K are experienced as cold. Equivalent colour temperatures are stated for fluorescent lamps and discharge lamps.
cOLOUR DESIGNATION
Light source manufacturers state the light source’s colour properties using a international colour designation consisting of three digits. The first digit represents the light source’s colour rendering and the last two digits stem from the colour temperature in Kelvin, formed by the colour temperature being divided by 100. A light source with the colour designation 830 has a general colour reproduction index of between 80–89 and a colour temperature of 3000 K.
LighT source 827 830 835 840 850 860 865 927 930 940 950 955 965
Fluorescent lamp T5 HE • • • • •
Fluorescent lamp T5 HO • • • • • •
Fluorescent lamp T5 Eco • •
Fluorescent lamp T8 • • • • • • • • • • • • •
circular fluorescent lamp T5c • • • •
compact fluorescent lamp FSD-I/E • • • •
compact fluorescent lamp FSD(H) • • • • • • • • •
compact fluorescent lamp FSQ-I/E • • •
compact fluorescent lamp FSM-I/E • • • •
compact fluorescent lamp FSS-I/E • •
www.eaglelighting.com.au 152
< contents
fdh (t16) Service mortality rate: 19 000 h 230 V
Fluorescent lamp Ø 16 mm straight (T5)
Fluorescent lamps, Double-capped linear, High frequency ballast
w socket flow (lm)1) lm/w2) cd/cm2 1) 827 830 840 865
14 G5 1200 96 1.5 81352 81351 81347
21 G5 1900 100 1.5 81354 81353 81348
24 G5 1750 89 2.2 81335 81372 81376 81607
28 G5 2600 104 1.5 81356 81355 81349 81608
35 G5 3300 104 1.5 81358 81357 81350 81609
39 G5 3100 92 2.5 . 81373 81377
49 G5 4300 99 2.0 81360 81359 81362 81610
54 G5 4450 93 2.6 81606 81374 81378 81611
80 G5 6150 88 2.9 - 81375 81379
FLUOREScENT LAMP T5
fdh (t16) Service mortality rate: 19 000 h 230 V
Fluorescent lamp Ø 16 mm straight (T5)
Fluorescent lamps, Double-capped linear, High frequency ballast
w socket flow (lm)1) lm/w2) cd/cm2 1) 940
24 G5 1400 71 1.8 81461
49 G5 3550 79 1.6 81462
54 G5 3800 75 2.0 81463
fdh (t16) long-life Service mortality rate: 48 000 h 230 V
Long-life fluorescent lamp Ø 16 mm straight (T5)
Fluorescent lamps, Double-capped linear, High frequency ballast
w socket flow (lm)1) lm/w2) cd/cm2 1) 827 830 840
28 G5 2600 104 1.5 - 81501 -
35 G5 3300 104 1.5 - 81502 -
49 G5 4300 99 2.0 - 81503 -
54 G5 4450 93 2.6 - 81504 -
fdh (t16) Service mortality rate: 48 000 h 230 V
Long-life Thermo-fluorescent lamp Ø 26 mm straight
Fluorescent lamps, Double-capped linear, High frequency ballast
w socket flow (lm)1) lm/w2) 827 830 840
28 G5 2750 104 - 81507 -
35 G5 3400 104 - 81508 -
FLUOREScENT LAMP T8
fd (t26) Service mortality rate: 12 000 h (conv.), 17 000 h (HF) 230 V
Fluorescent lamp Ø 26 mm straight (T8)
Fluorescent lamps, Double-capped linearw socket flow (lm) lm/w cd/cm2 827 830 840
15 G13 1000 67 1.0 81230 81186 -
18 G13 1350 75 1.0 81231 81146 81225
36 G13 3350 93 1.25 81233 81147 81226
58 G13 5200 89 1.5 81234 81148 81227
fd (t26) long-life Service mortality rate: 46 000 h (conv.), 60 000 h (HF) 230 V
Long-life fluorescent lamp Ø 26 mm straight (T8)
Fluorescent lamps, Double-capped linearw socket flow (lm) lm/w cd/cm2 827 830 840
36 G13 3350 93 1.25 - 81505 -
58 G13 5200 90 1.5 - 81506 -
cIRcULAR FLUOREScENT LAMP
fch (t-r 16) Average mortality rate: 16 000 h 230 V
circular fluorescent lamp Ø 16 mm (T5)
Fluorescent lamps, circular, High frequency ballastw socket flow (lm)1) lm/w2) cd/cm2 1) 827 830 840
22 2Gx13 1800 81 2.0 81390 81391 81565
40 2Gx13 3300 82 2.6 81392 81393 81566
55 2Gx13 4200 76 3.3 - 81312 81567
60 2Gx13 5000 83 3.8 - 81397 81568
fdh (t16) t5 eco Service mortality rate: 20 000 h 230 V
Fluorescent lamp Ø 16 mm straight (T5)
Fluorescent lamps, Double-capped linear, High frequency ballast
w socket flow (lm)1) lm/w2) cd/cm2 1) 830 840
13 G5 1150 109 1,4 81625 81626
20 G5 1650 99 2,2 81627 81628
25 G5 2450 114 1,4 81629 81630
32 G5 3100 114 1,4 81631 81632
45 G5 4100 109 2,0 81633 81634
50 G5 4400 102 2,6 81635 81636
73 G5 6150 99 2,9 81637 81638
¹ Nominal luminous flux measured at 25 °c temperature. Maximum luminous flux at 35 °c temperature is approximately 10–14 % greater.
² The lamps max. luminous flux is produced at 35 °c, which corresponds to the lamp operating temperature when operating in enclosed luminaires.
Note that the luminous efficacy (lm/W) applies to the light source and ballast losses have not been taken into consideration.
light sourcesFLUOREScENT LAMPS
www.eaglelighting.com.au 153
< contents
¹ Nominal luminous flux measured at 25 °c temperature. Maximum luminous flux at 35 °c temperature is approximately 10–14 % greater.
Note that the luminous efficacy (lm/W) applies to the light source and ballast losses have not been taken into consideration.
cOMPAcT FLUOREScENT LAMP
fsd-i (tc-s) Average mortality rate: 10 000 h 230 V
compact fluorescent lamp, 2-limb, 2-pin, short
Fluorescent lamps, Single-capped, Dual-shaped, Internal starterw socket flow (lm) lm/w cd/cm2 827 830 840
7 G23 400 57 2.7 81160 - -
9 G23 600 66 2.7 81161 - -
11 G23 900 81 2.6 81162 - -
fsd-e (tc-sel) Average mortality rate: 13 000 h 230 V
compact fluorescent lamp, 2-limb, 4-pin, short
Fluorescent lamps, Single-capped, Dual-shaped, External starterw socket flow (lm) lm/w cd/cm2 827 830 840
7 2G7 400 57 2.7 81365 - -
9 2G7 600 66 2.7 81366 - -
11 2G7 900 81 2.6 81367 81387 -
fsd (tc-l) Average mortality rate: (HF) 20 000 – (conv.) 15 000 h 230 V
compact fluorescent lamp, 2-limb, 4-pin, long
Fluorescent lamps, Single-capped, Dual-shaped
w socket flow (lm) lm/w cd/cm2 830 840
18 2G11 1200 66 2.6 81157 81470
24 2G11 1800 75 2.3 81158 81301
36 2G11 2900 80 2.8 81159 81471
40 2G11 3500 87 2.5 81316 81472
55 2G11 4800 87 3.4 81318 81473
80 2G11 6000 75 - 81338 81474
fsq-e (tc-del) Average mortality rate: 13 000 h 230 V
compact fluorescent lamp, 4-limb, 4-pin, short
Fluorescent lamps, Single-capped, Dual-shaped, External starter
w socket flow (lm) lm/w cd/cm2 830 840
10 G24q1 600 60 2.8 81304 -
13 G24q1 900 69 3.0 81221 81439
18 G24q2 1200 66 3.6 81222 81435
26 G24q3 1800 69 4.5 81223 81436
USE MERcURy FSM-LAMPS FOR:
When quick ignition of the luminaire is important
USE AMALGAN FSM-LAMPS FOR:
When the luminous efficacy is important
fsm-e (tc-tel) amalgam Average mortality rate: 13 000 h 230 V
compact fluorescent lamp, 6-limb, 4-pin
Fluorescent lamps, Single-capped, Multi-limbed, External starterw socket flow (lm) lm/w cd/cm2 830 840
18 Gx24q2 1200 66 5.5 81327 81475
26 Gx24q3 1800 69 6.5 81309 81476
32 Gx24q3 2400 75 7.4 81329 81477
42 Gx24q4 3200 76 7.7 81331 81478
57 Gx24q5 4300 75 7.8 81334 81336
fsm-e (tc-tel) mercury Average mortality rate: 13 000 h 230 V
compact fluorescent lamp, 6-limb, 4-pin
Fluorescent lamps, Single-capped, Multi-limbed, External starterw socket flow (lm) lm/w cd/cm2 830 840
13 Gx24q1 900 69 5.0 81332 -
18 Gx24q2 1200 69 5.5 81323 81415
26 Gx24q3 1800 76 6.5 81411 81416
32 Gx24q3 2400 75 7.4 81412 81417
42 Gx24q4 3200 75 7.7 81413 81418
fss-i (tc-dd) Average mortality rate: 12 000 h 230 V
compact fluorescent lamp 2D, 2-pin Fluorescent lamps, Single-capped, Square-shaped, Internal starter
w socket flow (lm) lm/w 830 840
16 GR8 1050 65 81361 -
28 GR8 2050 73 - -
fss-e (tc-ddel) Average mortality rate: 12 000 h 230 V
compact fluorescent lamp 2D, 4-pin,
Fluorescent lamps, Single-capped, Square-shaped, External starterw socket flow (lm) lm/w 830 835 840
16 GR10q 1050 65 81363 -
28 GR10q 2050 73 81364 -
38 GR10q 2850 75 81368 -
fsq-i (tc-d) Average mortality rate: 10 000 h 230 V
compact fluorescent lamp, 4-limb, 2-pin
Fluorescent lamps, Single-capped, Quad-shaped, Internal starter
w socket flow (lm) lm/w cd/cm2 830 840
10 G24d1 600 60 2.8 81302 -
13 G24d1 900 69 3.0 81255 -
18 G24d2 1200 66 3.6 81256 81465
26 G24d3 1800 69 4.5 81257 81466
fsm-e (tc-tel) mercury Service mortality rate: 19 000 h 230 V
compact fluorescent lamp, 6-limb, 4-pin
Fluorescent lamps, Single-capped, Multi-limbed, External starter
w socket flow (lm) 1) lm/w 830 840
14 GR14q1 1200 80 81615 81616
17 GR14q1 1450 81 81617 81618
light sourcescOMPAcT FLUOREScENT LAMPS
www.eaglelighting.com.au 154
< contents
light sourcesMETAL HALOGEN & HIGH PRESSURE SODIUM LAMPS
mt (hit-cri) Average mortality rate: (35 W) 9 000 h, (70 W) 6 000 h 230 V
Metal halogen lamp, with plug-in base
Metal halide lamps, Tubular
W Socket Flow (lm) lm/W colour temp. Philips Osram
35 G8.5 3300 94 3000 K 81404 81433
70 G8.5 6600 94 3000 K 81405 81434
mt Average mortality rate: (45/60 W) 18 000 h, (90/140 W) 30 000 h 230 V
Metal halogen lamp, with bayonet base
Metal halide lamps, TubularW Socket Flow (lm) lm/W colour temp. Philips
45 PGZ12 4300 68 2720 K 81590
60 PGZ12 6800 113 2730 K 81591
90 PGZ12 10450 116 2880 K 81592
140 PGZ12 16500 118 2860 K 81593mtm (mt/uB-20/30/1B-h-gu6,5-13/57) Average mortality rate: 12 000 h 230 V
Metal halogen lamp, with plug-in base
Metal halide lamps, TubularW Socket Flow (lm) lm/W colour temp. Osram
20 GU6,5 1700 85 3000 K 81427
METAL HALOGEN LAMP
mt (hit-cri) Average mortality rate: 12 000 h 230 V
Metal halogen lamp, with plug-in base
Metal halide lamps, TubularW Socket Flow (lm) lm/W colour temp. Philips Osram
35 G12 3300 94 3000 K 81386 81430
70 G12 6600 94 3000 K 81384 81431
150 G12 14000 93 3000 K 81385 81432
mtm (hit-tc-ce) Average mortality rate: 6 000 h 230 V
Metal halogen lamp, with bayonet base
Metal halide lamps, TubularW Socket Flow (lm) lm/W colour temp. Philips
20 PGJ5 1650 83 3000 K 81406
35 PGJ5 3000 86 3000 K 81428
md (hit-de) Average mortality rate: 6 000 h 230 V
Metal halogen lamp,
Metal halide lamps, Double-ended
W Socket Flow (lm) lm/W colour temp.
70 Rx7s 6600 94 3000 K 81204
70 Rx7s 6000 85 4300 K 81168
150 Rx7s 13200 88 3000 K 81205
mr (hiPar 20, hiPar 30-l) 230 V
Directed metal halogen lamp
Metal halide lamps, metallised glass reflectorW Socket 10° 30° 40°
50 E27 Par 20 81380 81381 -
75 E27 Par 20 81382 - 81383
Maximum luminous intensity (cd) directly in front of the lamp:
W 10° 30° 40°
50 12800 6000 -
75 48000 - 7000
mr Average mortality rate: 7 500 h 230 V
Metal halogen lamp (Gx8,5)
Metal halide lamps, metal reflectorW 10° 30° 40°
35 81480 81481 81482
70 81484 81485 81486
Maximum luminous intensity (cd) directly in front of the lamp:
W 10° 30° 40°
35 35000 8500 4000
70 50000 15000 9000
sth (hst-cri) Service mortality rate: 9 000 h 230 V
High pressure sodium lamp “White SON”, with plug-in base
Sodium lamps, Tubular, High colour rendering
W Socket Flow (lm) lm/W colour temp.
50 PG12-1 2300 46 2550 K 81319
100 PG12-1 5000 50 2550 K 81320
HIGH PRESSURE SODIUM LAMP
sth Service mortality rate: 9000 h 230 V
High pressure sodium lamp “Mini White SON”, with plug in base
Sodium lamps, Tubular, High colour renderingW Socket Flow (lm) lm/W colour temp.
50 Gx12-1 2400 48 2550 K 81398
100 Gx12-1 4900 49 2550 K 81399
se-e (hse-e) Service mortality rate: 16 000 h 230 V
High pressure sodium lamp, elliptical
Sodium lamps, Elliptical bulb, diffuse coating,/External ignitor
W Socket Flow (lm) lm/W colour temp.
50 E27 3500 70 2000 K 81459
70 E27 5600 80 2000 K 81460
100 E40 10200 102 2000 K 81261
150 E40 14500 97 2000 K 81262
250 E40 27000 108 2000 K 81263
400 E40 48000 120 2000 K 81264
me (cdm) Average mortality rate: 20 000 h 230 V
Metal halogen lamp, elliptical
Metal halide lamps, Elliptical bulb, diffuse coating
W Socket Flow (lm) lm/W colour temp.
250 E40 18000 72 4500 K 81518
400 E40 32500 81 4500 K 81519
mt (hit) Average mortality rate: 20 000 h 230 V
Metal halogen lamp
Metal halide lamps, Tubular
W Socket Flow (lm) lm/W colour temp.
250 E40 25000 82 4500 K 81499
400 E40 35000 87 4500 K 81500
se-i (hse-i) Service mortality rate: 16 000 h 230 V
High pressure sodium lamp, elliptical
Sodium lamps, Elliptical bulb, diffuse coating/Internal ignitor
W Socket Flow (lm) lm/W colour temp.
70 E27 5900 84 2000 K 81260
Note that the luminous efficacy (lm/W) applies to the light source and ballast losses have not been taken into consideration.
www.eaglelighting.com.au 155
< contents
light sourcesHALOGEN LAMPS
hsg/c (qt-tr9, qt-ax9, qt-ax12) Average mortality rate: 3 000 h 12 V
Low voltage halogen lamp
Halogen lamps, Single-ended, General purpose
W Socket Flow (lm) lm/W colour temp.
10 G4 140 14 3000 K 81207
20 G4 350 17 3000 K 81132
20 Gy 6.35 350 17 3000 K 81198
35 Gy 6.35 650 18 3000 K 81199
50 Gy 6.35 950 19 3000 K 81100
65 Gy 6.35 1575 21 3000 K 81216
HALOGEN LAMPS
hegt/f (qt-32) Average mortality rate: 2 000 h 230 V
Halogen lamp (mains voltage)
Halogen lamps, double Evenlope, single-ended, General purpose (Bulged) Tubular /Frosted
W Socket Flow (lm) lm/W colour temp.
100 E27 1470 15 2900 K 81297
150 E27 2400 17 2900 K 81209
250 E27 4200 17 2900 K 81299
hrgi (qr-cBc 5 socket gu5,3 Average mortality rate: 4 000 h 12 V
cold beam light with front glassHalogen lamps, dichroic Reflector, General purpose, Integral front cover
W colour temp. 10° 14° 24/25° 38° 42° 60°
20 2900 K 81192 - - 81190 - -
35 2900 K 81440 - 81441 81442 - 81443
50 2900 K 81445 - 81446 81447 - 81448
71 2900 K - 81212 81211 - 81210 -
Maximum luminous intensity (cd) directly in front of the lamp:
W 10° 14° 24/25° 38° 42° 60°
20 6500 - - 1000 - -
35 11000 - 4400 2200 - 1100
50 15000 - 5700 2800 - 1400
71 - 11500 5500 - 2200 -
hmg socket g53 Average mortality rate: 3 000 h 12 V
Reflector halogen lamp 12 V
Halogen lamps, Metal reflector, General purposeW 8° 24°
65 81425 81426
Maximum luminous intensity (cd) directly in front of the lamp:
W 8° 24°
65 43000 7500
hdg 230 V
Linear Halogen lamp
Halogen lamps, Double-ended, General purpose
W Socket Flow (lm)
150 R7s 2400 81488
300 R7s 5300 81251
iaa/c (a60) Average mortality rate: 2 000 h 230 V
Halogen lamp, clear
Incandescent lamps, A=bulb diameter > 45 mm, A=pear shape, /clearW Socket Flow (lm) lm/W colour temp.
52 E27 820 15.8 2900 K 81650
70 E27 1200 17.1 2900 K 81651
105 E27 1980 18.9 2900 K 81652
Note that the luminous efficacy (lm/W) applies to the light source and ballast losses have not been taken into consideration.
www.eaglelighting.com.au 156
< contents
light PlanningQUANTITIES, UNITS AND THEIR SIGNIFIcANcE
QuanTiTy/concepT symboL uniT FormuLa expLanaTion
luminous intensity | Candela (cd)
I=Φ/ω Luminous intensity is the intensity in a determined direction. Definition: Luminous flux per solid angle (ω). Definition: Luminous flux per solid angel (ω)
illuminance E(lx)
Lux (lm/m²)
Illuminance refers to the luminous flux that hits a specific surface. Definition: Luminous flux per unit area (m²).
luminance(luminous intensity)
L (cd/m²) L=I/A(L=I/Acosα)
This is defined as the luminous intensity in a specific direction from a surface of a light source, luminaire or lit surface, divided by the projected area.
luminous flux Φ lumen (lm)
Φ=I/ω Luminous flux refers to the total amount of light emitted from a light source. It is defined as the amount of light emitted when the light source’s radiant luminous flux, is evaluated against the eyes sensitivity in daylight (Vλ-curve according to CIE).
design lumen ΦB lumen Refers to the light source’s luminous flux that is emitted at an ambient temperature of 25°C. The quoted luminous flux may differ from the light source’s maximum luminous flux. (For example T5 fluorescent lamp).
light output ratio(LOR)
ηA Ratio between the total flux from the luminaire, measured under specified practical conditions with its own light sources and equipment, and the total individual luminous flux from the same light sources operating outside the luminaire using the same equipment, under specified conditions.
design efficiency ηB The design efficiency of the luminaire is used in lighting calculations together with the design lumen for the light source. The design efficiency includes the correction for BLF when measuring the luminaire and light source in an ambient temperature of 25°C. ηB = ηmeasured x BLF.
Ballast lumen factor BLF – – Defines the luminous flux from a light source. It is measured with either a commercial ballast or a reference ballast, at an ambient temperature of 25°C.
colour temperature – kelvin (K) CIE 17.4 The colour temperature is defined using absolute temperature. (0 K = -273.15 °C or 0 °C = +273.15 K)
colour reproduction index Ra Ra-index CIE 17.4 Is the measurement of a light source’s ability to reproduce colour compared to a reference light source at a predetermined colour temperature. An Ra index is used for graduation, which according to CIE, can be at the most 100 and shall for lighting workplaces be a minimum of 80.
luminous efficacy – light source
H (lm/W) η=Φ/P The luminous efficacy from a light source can be defined as the relationship between the luminous flux emitted by a light source and the electrical output it consumes. Luminous efficacy can also be described as a measurement of light source efficiency.
luminous efficacy – system(light source + ballast)
H (lm/W) η=Φ/P The system luminous efficacy from a light source can be defined as the relationship between the luminous flux emitted by a light source and the electrical output it consumes including ballast losses.
glare CIE- 31,112, 117
Is a visual impairment caused by the extreme contrast or inappropriate distribution of luminance levels. Glare is normally subdivided into: Discomfort glare UGR/NB and Disability glare TI/GR.
uniformity– illuminance– luminance
Emin/EaveLmin/Lave
Ratio between the lowest value and the average value of brightness on a specific surface unless otherwise stated.
luminaire luminance – – The average luminance of a luminaire’s luminous parts measured and/or calculated in the C-plane at 15° intervals starting at 0°, and elevation angles (γ) of 65°, 75° and 85°.
shielding angle for luminaire’s light source
– – The angle between the horizontal plane and the first line of sight at which any part of the luminaires light source becomes directly visible.
cut-off angle for luminaires
– – Angle, measured upwards from nadir, between the vertical axis and the first line of vision at which the light sources and surfaces with high luminance are not visible.
solid angle ω steradian (sr)
ω=A/r² The relationship between the cut out area A on a sphere caused by a beam of light on its surfaceand the square of the spheres radius r.
mean mortality rate - for light sources
– hour (h) – Mean mortality rate is the average life span of a light source and is defined as the time after which 50 % of a large number of controlled light sources have failed (Incandescent lamps, halogen lamps and fluorescent lamps).
service mortality rate– for light sources
– hour (h) – The service mortality rate is defined as the point at which 80 % of the lighting installation’s original luminous flux remains. The depreciation in luminous flux depends on the reduced luminous flux and spent light sources.
economic mortality rate – for light sources
– hour (h) – The economic mortality rate is defined as the point at which 70 % of the lighting installation’s original luminous flux remains. The depreciation in luminous flux depends on the reduced luminous flux and spent light sources.
For standardised definitions and further clarification of magnitudes, units and concepts, see EN 12 665 – Basic terms and criteria for specifying lighting requirements. (EN 12 665 – Basic terms and criteria for specifying lighting requirements).
www.eaglelighting.com.au 157
< contents
light PlanningLIGHT MEASUREMENT
The luminaire’s light distribution is measured on several c-planes around the luminaire, at intervals of at least 15°. First measurement plane (c=0°) is across the lamps’ longitudinal axis. γ-angles several angles are measured, at least every 5 degrees (see figure).
LIGHT DISTRIBUTION cURVE
The light distribution curve drawn in a polar diagram denotes the luminaire’s luminous intensity in different directions as a function of viewing angle in one or more planes. It is usually represented by an unbroken line that indicates the light distribution perpendicular to the light source’s longitudinal axis and with a dashed line that indicates the light distribution in direction of the longitudinal axis. The values of the light distribution curves are scaled to correspond to 1000 lm from the light source (cd/1000 lm, cd/ klm). This is why it is often possible to show luminaires with different outputs on a common polar diagram.
ISOLUx DIAGRAM
The diagram shows, using curves (or scales) a predefined area, inside which the horizontal illuminance exceeds the curve’s lux value. The position of the luminaire is usually indicated on the diagram. Alternatively, the isolux diagram can be represented by a 3D diagram, which is best suited for showing the uniformity of the lighting installation. The calculation points’ illuminance values can be introduced onto the premises’ layout drawing and the results given in table form. The results are available in all the above mentioned forms in DIALux.
Luminaires are given an IP-classification. The IP-classification consists of a two digit code that describes the degree of protection against solid objects as well as moisture and water. Standard luminaires will have an IP classification of IP 20 or higher.
The table below describes respective IP-classifications. The IP-class is stated in plain text on the luminaire’s label.
Symbols as set out below can also be used in combination with the text. Note that IP 20 luminaires do not need to be marked. IP is an abbreviation of Ingress Protection.
DESIGN AccORDING TO FIRST NUMBER
DESIGN AccORDING TO THE SEcOND NUMBER
UNPROTEcTED DRIP PROOF RAIN PROOF SPLASH PROOF JET PROOF WATER-TIGHT SUBMERSIBLE
unProtected IP 00 IP 01
Protected IP 10 IP 11 IP 13
Protected IP 20 IP 21 IP 23
Protected IP 40 IP 41 IP 43 IP 44 IP 45
dust-Proof IP 54 IP 55
dust-Proof IP 65 IP 67 IP 68
iP classesDEGREE OF PROTEcTION
www.eaglelighting.com.au 158
< contents
This symbol denotes the luminaire’s light distribution is direct/indirect.
Denotes the luminaire’s IP classification. ip65 : Totally protected against dust. Protected against low pressure jets of water from all directions.
This symbol denotes the luminaire’s light distribution is direct.
Protected against 20 joules impact. Equivalent to impact of 5kg mass dropped from 400mm above impacted surface.
This symbol denotes the luminaire’s light distribution is round beam.
A low voltage lamp incorporating multi-facets within the refelctor.
This symbol denotes the luminaire’s light distribution is directional.
class i : Appliances with functioning insulation. Equipped with an earth termination.
This symbol denotes the luminaire’s light distribution is assymetrical.
Signifies that the luminaire can be obtained in designs with em LED.
Denotes which light source/light sources that can be supplied with the luminaire. Several symbols next to the same luminaire indicate that the luminaire is available in different designs.
Signifies that the luminaire is available in designs for conventional emergency lighting operation.
Denotes that the luminaire is designed for the T5-light source’s unique characteristics. The small diameter of the fluorescent lamp has created new conditions for light control.
Indicates the luminaire is not suitable to be covered with thermally insulating material.
Denotes the luminaire’s IP classification. ip20 : Protected against solid objects up to 12 mm, e.g. persons fingers.
Revit MEP file is available for download at www.eaglelighting.com.au
Denotes the luminaire’s IP classification. ip40 : Protected against solid objects over 1mm (tools, wires, and small wires).
IES file is available for download at www.eaglelighting.com.au
Denotes the luminaire’s IP classification. ip44 : Protected against solid objects over 1mm (tools, wires, and small wires). Protection against splashing water from any direction (splash proof). - limited ingress permitted.
AGi32 file is available for download from www.photometrics.agi32.com/downloader.php
symBols.
IP20
IK10
IP44
IP65
IP40
www.eaglelighting.com.au 159
< contents
Product codescATALOGUE REFERENcE INFORMATION
Please follow the simple steps below to ensure that you are ordering the luminaire with the correct variation and in some cases, diffuser options. Tables will be shown on the datasheet so you can refer to the variation suffix.
downlight accessories diagram
diffuser and variation diagram
www.eaglelighting.com.au 160
< contents
indeXa-z
aAccessories - Anti-ligature Kit 86Accessories - Downlights 85Accessories - LED Retrofit Kit 87Accessories - Troffers 40Accessories - Uno 70Aerial LED 96Aerial T5 97Aureled 22Aureled Dropped 23Aureled Edge 24Aureled Flow 25Aureled Multisquare 26Aurora Vista 60BBatten Angleskirt 98Batten Diffused 101Batten Slimline 99Batten Wire Guard 100Bells T5 92Bladerunner 93Buccaneer 114ccleanroom cLB IP54 50cleanroom IP44 cyanosis LED 45cleanroom IP44 LED 44cleanroom IP44 LED High Output 46cleanroom IP44 T5 47cleanroom IP44 T8 48cleanroom IP54 49dDensus G2 116Densus LED 115Discovery Space 113eemLED Micro 74Enviro 35Enviro Diffused 36Enviro Diffused Hygiene 59Enviro Hygiene 58fFacetted 82Flair 110Flexitroffer 38Florence Elite 56gGondol 55hHyperion Ag 29iIndigo combo 30Indigo Hygiene 57IP65 Rated Downlight 81IP65 Rated Tamperproof 127iTrack emLED 75lLuna 91mMonitor 120Multifive Air G2 32Multifive G2 31
nNite cell Lamp 117oOperating Theatre Light 53Orion 78Orion Phantom 79Orion Tilt 80PPantheon 124Parkalux 109Pelmet 102Penta G2 33Pentair G2 34qQuadrant 122Quadriga 121Quantum 123rRondo G2 Recessed 126Rondo G2 Wall 125sSatin 83Secureroom IP65 51Secureroom SLB IP65 52Specular 84tTampa Downlight 112Tampa T5 111Tuscan 45 Angle 108Tuscan 60/30 Angle 107Tuscan Surface Mounted 106uUni-cell 118Uno Beta Direct 64Uno Beta Direct/Indirect 65Uno continuous Direct 68Uno continuous Direct/Indirect 69Uno Diffused Direct 66Uno Diffused Direct/Indirect 67vVanguard 119Vertex 27Vertex Air 28Visionline 37XxT5 Troffer 39Uno Beta Direct 60Uno Beta Direct/Indirect 61Uno continuous Direct 64Uno continuous Direct/Indirect 65Uno Diffused Direct 62Uno Diffused Direct/Indirect 63
FiTTing pg FiTTing pg
www.eaglelighting.com.au 161
< contents
our Product
© Eagle Lighting Australia 2013
All rights reserved.
disclaimer:
Whilst every effort has been made to ensure the accuracy of the information in this publication, ELA assumes no responsibility for errors, omissions or typographical errors.
ELA reserves the right to edit material. All details, drawings , images and specifications are subject to change without prior notice.
Due to ongoing research and development by manufacturers, lamp specifications may change. All dimensions are nominal in millimetres.
All goods supplied by Eagle Lighting Australia are subject to our general terms and conditions.
For further information on any of the products featured in this catalogue, please contact your local sales representative.
www.eaglelighting.com.au [email protected]
victoria 17-19 Jets court Melbourne Airport VIc 3045 P 03 9344 7444 f 03 9344 7433
new south wales Unit 4, 21 Mars Road Lane cove NSW 2066 P 02 9420 5799 f 02 9420 5988
queensland 53 caswell Street East Brisbane QLD 4169 P 07 3891 0744 f 07 3891 0755
distriButors - australia
act LITE-TEcH AGENcIES 1 Lithgow Street Fyshwick AcT 2609 P 02 6280 5516 f 02 6280 8635
tasmania SOUTHERN LIGHTING & DISTRIBUTION 34 Federal Street North Hobart TAS 7000 P 03 6231 5599 f 03 6231 5211
western australia H.I. LIGHTING PTy LTD 111 Broadway Bassendean WA 6054 P 08 9377 1322 f 08 9377 1761
south australia H.I. LIGHTING SA PTy LTD 8 Hender Avenue Magill, SA 5072 P 08 8304 8500 f 08 8304 8501
distriButors - new Zealand
aucKland FAGERHULT NEW ZEALAND Level 1, 18A Neilpark Drive East Tamaki, Auckland 2013 m +64 21 655 609 m +64 21 509 248
wellington FAGERHULT NEW ZEALAND m +64 21 597 900