DIRECTOR DEPARTMENT OF TECHNICAL...

Tender Document Issued To:

Name of the Tenderer : ______________________________________________________

Address : ______________________________________________________

______________________________________________________

______________________________________________________

Signature of the Official Issuing the Tender Document with Desingation and Date

Construction of Govt. Polytechnic Colleges at Kampli in Bellary District,

Kartagi in Koppal District and at Surpur in Yadgir District for DTE

Open Tender Notice No. RITES/BLR/OT/03/2015 dated 16.02.2015

FINANCIAL BID

DIRECTOR

DEPARTMENT OF TECHNICAL EDUCATION

BANGALORE

TENDER

RITES Ltd.,

(A Govt. of India Enterprise)

Site Office

3 A, Bharat Apartments, 44/1,

E.Mail : [email protected]

Fairfield Layout, Race Course Road

Bangalore - 560 001

Phone: 080 - 22257118 / 22280268

Fax: 080 - 22266557

Schedule WORKS COST (`̀̀̀)

I Construction of Govt. Polytechnic College at Kampli in

Bellary District for DTE

II Construction of Govt. Polytechnic College at Kartagi

in Koppal District for DTE

III Construction of Govt. Polytechnic College at Surpur in

Yadgir District for DTE

TOTAL PROJECT COST

TOTAL IN WORDS

Construction of Govt. Polytechnic Colleges at Kampli in Bellary District, Kartagi in

Koppal District and at Surpur in Yadgir District for DTE

SUMMARY OF COST

RITES Ltd.,

For and on behalf of DTE 1 Signature of the Bidder

SN DESCRIPTION AMOUNT

Civil Works

1 Part A - KPWD SR Items `

2 Part B - CPWD SR Items `

3 Part C - Market rate Items `

Electrical Works


2 Part B - Market Rate items `

TOTAL - Schedule I `

TOTAL

(in Words) - Rupees

Construction of Govt. Polytechnic College at Kampli in Bellary

District for DTE

Abstract - Schedule - I

RITES Ltd.,

For and on behalf of DTE 2 Sugnature of the Bidder

Description Unit Qty

P. No l No

Part- A - KPWD SR Items

1 132 18.1 KSRRB 200-1: Cutting of trees girth from 300 mm to

600mm including cutting of trunks, branches and removal

of stump roots stacking of servicable materials earth filling

in the depressions/pit, labour charges complete as per

specifications. MORTH Specification clause 201/Chapter 2 Each 5.00 172.20 861.00





specifications. MORTH Specification clause 201/Chapter 2Each 5.00 522.90 2614.50





specifications. MORTH Specification clause 201/Chapter 2 Each 5.00 1275.75 6378.75

4 132 18.10 KSRRB M200-7.1: Clearing grass and removal of rubbish

by manual means and stacking outside the periphery of the

area cleaned complete as per specifications. MORTH

Specification No. 201 Ha 0.40 14671.65 5868.66

5 7 2.24 Earth work for lowering and levelling the ground other than

foundation works by mechanical means up to 3.00 depth,

including providing shoring and strutting, removal of

stumps and other deleterious matter, dressing of sides and

bottom, filling back the excavation earth to the extent

required including the cost of labour & HOM of

machineries, as per drawing and technical specification. Cum 715.00 54.60 39039.00

6 5 2.4 KSRB 2-2.2 : Earth work excavation for foundation of

buildings, water supply, sanitary lines and electrical

conduits either in pits or in trenches 1.5m and above in

width in Hard soil not exceeding 1.5m in depth, including

dressing the bottom and sides of pits and trenches,

stacking the excavated soil clear from edges of excavation

with lead upto 50 m after breaking of clods complete as per

specifications. Specification No. KBS 2.1 (b)/2.3.5Cum 941.00 257.25 242072.25

7 5 2.6 KSRB 2-2.4: Excavation 1.5m and above in width in soft

rock without blasting for foundation of buildings, water

supply, sanitary lines and electrical conduits either in pits or

in trenches not exceeding 1.5m in depth, stacking the

excavated stuff from edges of excavation with lead upto

50m including cost of labour and HOM of euipment

complete as per specifications. Specification. No KBS

2.1.d / 2.9.4 / 2.18 / 2.19 Cum 202.00 796.95 160983.90

AmountRate

Construction of Govt. Polytechnic College at Kampli in Bellary District for DTE

Sl No Bellary SR -

2014-15

RITES Ltd.,



P. No l No

AmountRateSl No Bellary SR -

2014-15

8 5 2.8 KSRB 2.2.6: Excavation 1.5m and above in width in hard

rock by chiselling and/or wedging, where blasting is

prohibited for foundation of buildings, water supply, sanitary

lines and electrical conduits either in pits or in trenches

1.5m in depth stacking the excavated stuff clear from the

edge of excavation with lead upto 50m including cost of

labour complete as per specifications. Specification No.

KBS cum 202.00 1143.45 230976.90

9 6 2.10 KSRB 2.3 :Filling available excavated earth (excluding

rock) in sides of foundations upto plinth in layers not

exceeding 20 cms. In depth, compacting each deposited

layer by ramming after watering with lead upto 50 m. and

lift upto 1.5m. Including cost of all labour complete as per

speicifications. Specification No. KBS 2.9 Cum 1656.00 115.50 191268.00

10 9 3.2 KSRB -3.2: Providing and injecting chemical emulsion for

Pre-constructional Anti-Termite Treatment, creating

continuous chemical barrier under and around the column

pits,walls ,trenches,basement excavation,top surface of the

plinth filling, junction of wall and floor, along the external

perimeter of building, expansion joints, over the top surface

of consolidated earth on which apron is to be laid,

surrounding of pipes and conduits, with chloropyriphos

emulsifiable concentrates of 20%concentration, including

cost of chemical, diluting in water to one percent

concentration, labour, HOM of equipments, complete as

per specifications.(Plinth area of the building at ground

floor only shall be measured ) Specification No. KBS 3.2.6

/ 3.2.7 Sqm 1320.00 105.00 138600.00

11 12 4.3 KSRB 4-1.3: Providing and laying in position plain cement

concrete of mix 1:4:8 with OPC cement @ 180kgs, with

40mm and down size graded granite metal coarse

aggregates @ 0.85cum and fine aggregates @ 0.57cum

machine mixed, concrete laid in layers not exceeding

15cms, thick, well compacted, in foundation including cost

of all materials, labour, HOM of machinery, curing

complete as per specifications. specification No KBS

4.1,4.2 Cum 195.00 4250.40 828828.00


concrete of mix 1:3:6 with OPC cement @220 kgs with


aggregates @ 0.84 cum and fine aggregates @ 0.56 cum,

machine mixed, concrete laid in layers not exceeding 15

cms, thick, well compacted, in foundation, plinth and cills,

including cost of all materials, labour, HOM of machinery,

curing complete as per specifications. Specification No

KBS 4.1,4.2

Ground floor Cum 15.00 4753.35 71300.25

RITES Ltd.,



P. No l No


2014-15

13 13 4.12 KSRB 4-2.7: Providing and laying in position reinforced

cement concrete of design mix M 25 with OPC cement @

340 kgs with 20mm and down size graded granite metal

coarse aggregates @ 0.70 cum and fine aggregates @

0.47 cum, with superplastisiser at 3.0 lts. conforming to

IS9103-1999 reaffirmed -2008, machine mixed, concrete

laid in layers not exceeding 15 cms, thick, vibrated for all

works in ground floor level for roof slabs, staircase, lintels,

retaining wals, return walls, walls(any thickness ) including

attached plasters, columns, pillars, posts, struts,

buttresses, string or lacing courses, parapets, coping, bed

blocks, anchour blocks, plain windows cills, fillets etc.,

inclduing cost of all materials, labour, HOM of machinery,

curing complete as per specification s. Specification No

KBS 4.1,4.6 cum 757.00 5835.90 4417776.30

14 14 4.20 KSRB 4.2.11 : Providing and laying in position reinforced

cement concrete of design mix M20 with OPC cement @

27.20 kgs with 12 mm and down size graded granite metal

course aggregate @0.05865 cum and fine aggregates @

0.0391 cum, with superplastisiser @ 0.225 lts, machine

mixed, well compacted for plain Chajja of 8.5 cms. average

thickness upto ground floor level, including cost of all

materials, labour, HOM of machinery, finishing , curing,

complete as per specifications. Specification No. 4.1, 4.6 Sqm 68.00 464.10 31558.80

15 15 4.28 KSRB 4-6.1 : Providing and removing centering, shuttering,

strutting, propping etc., and removal of form work for

foundations, footings, bases of columns for mass concrete

including cost of all materials, labour complete as per

specifications. Specification No. KBS 4.6.2 Sqm 561.00 228.90 128412.90

16 15 4.18 KSRB 4-6.2: Providing and removing centering, shuttering,

strutting, propping etc., and removal of form work for flat

surface such as roofs, landings, balconies and likes,

thickness up to 200mm including cost of all materials,

labour complete as per specifications upto 3.5m from

ground level, Specification No. KBS 4.6.2 Sqm 1236.00 305.55 377659.80


strutting, propping etc., for columns, pillars, post and struts,

square /rectangular / polygon in plan including cost of all

materials, labour complete as per specifications.

Specification No. KBS 4.6.2 Sqm 1168.00 354.90 414523.20


strutting, propping etc., an removal of form work for sides

and soffits of beams, beam haunchings, cantilever girders,

bressumers and lintels not exceeding 1m in depth including

cost of all materials, labour complete as per specifications.


19 16 4.37 KSRB 4-6.10: Providing and removing centering,

shuttering, strutting, propping etc., for chajjas, corbels etc.,

including edges including cost of all materials, labour

complete as per specification. Specification No.KBS 4.6.2 Sqm 81.00 262.50 21262.50

RITES Ltd.,



P. No l No


2014-15

20 16 4.38 KSRB 4-6.11 :Providing and removing

centering,shuttering,strutting,propping etc., and removal of

form work for stairs (excluding landing) except spiral

staircase including cost of all materials, labour complete as

per specification. Specification NO. KBS 4.6.2 Sqm 56.00 476.70 26695.20

21 17 4.46 KSRB 4.9.2 : Providing T.M.T steel reinforcement for

R.C.C work including straightening, cutting, bending,

hooking, placing in position, lapping and / or welding

wherever required, tying with binding wire and anchoring to

the adjoining members wherever necessary complete as

per design (laps, hooks and wastage shall not be

measured and paid) cost of materials, labour, HOM of

machinery complete as per specifications. Specification

No. KBS 4.6.3

4.46.2 For TMT bars Fe 500 Tonne 72.00 73799.25 5313546.00

22 23 5.6 KSRB-5.2-3 : Providing and constructing Granite/ trap/

basalt size stone masonry in foundation with cement

mortar 1:6, stone hammered dressed in courses not less

than 20cms high, bond stones at two m. apart in each

course including cost of materials, labour, curing complete

as per specifications. KBS 5.1.13 Cum 221.00 3992.10 882254.10

23 23 5.9 KSRB 5.3-3: Providing and constructing granite/trap/

basalt Size stone masonry in basement with cement

mortar 1:6 ,edges of stones chistle dressed in courses not

less than 15cms high, bond stones at two m, apart in each


as per specifications, KBS 5.1.13 Cum 81.00 4912.95 397948.95

24 28 6.3 KSRB 6-1.3 : Providing and constructing burnt brick

masonry for basement and superstructure with approved

quality of non-modular bricks of standard size of class

designation 35 with cement mortar 1:6 including cost of

materials, labour charges, scaffolding, curing complete as

per specifications. Specification No. KBS 6.2 cum 484.00 5238.45 2535409.80

25 28 6.25 KSRB 6-7.4 : Construction of partition wall 11.2 cm thick

with non modular table moulded burnt brick of class


materials labour charges, scaffolding, curing complete as

per specification KBS 6.2 Sqm 41.00 704.55 28886.55

26 31 7.1 KSRB 7.1: Providing and fixing in position collapsible

steel shutters with single or double leaf with vertical

channel 20x10x2mm braced with flat iron diagonals

20x5mm size with top and bottom rails of 'T' iron sections

of 40x40x6mm with 38mm dia steel pulleys complete with

bolt and nuts locking arrangements, stoppers, handles on

both sides with 7.5cms openings at 10cms c to c applying

a priming coat of red lead paint . Cost of mateials, labour,

HOM of machinery complete as per specifications. Size of

Gate 2.4m x 1.4m. Specification No.KBS 7.7/7.12. Sqm 15.00 4566.45 68496.75

RITES Ltd.,



P. No l No


2014-15

27 39 7.24.1 c Providing and fixing cold rolled prepainted steel windows

of IS standards, made out of 0.6mm thick deep drawing

quality galvanised on both sides 120gms / sq.mtr. Primer

coat upto 5 microns with thermosetting epoxy resin and

finish painted with a polyester based paint 20 microns

thick. The size of profiles is approximately 46x52mm for

external frames, 46x46mm section for shutters, 46x70mm

section for centre mullion / transom and 18x31mm section

is for fixing glasses. The section should be cut to length

joint mitred and assembling by means of corner brackets

made out of cold rolled annealed strips of 1.2mm thick duly

galvanised and fixed with nickle plated self taping screws.

The shutters are provided with approved quality of fixtures

like handles made out of zamac alloy die cast and powder

coated, receiver made out of glass filled nylon and hinges

made out of CRCA powder coated. 4mm thick glass should

be fixed with EPDM gaskets. The above frames are fixed to

the concrete / masonary walls by means of self expanding

screws.- with 4mm float glass and with guard bars.Sqm 140.00 4200.00 588000.00

28 43 7.39 Providing and fixing 304 grade stainless steel hand rails of

14-gauge pipes for Ramps or staircase are made out of

stainless steel hollow pipes using 50mm dia for verticals @

1.60 mtr c/c are fixed to the ramps or steps by drilling with

bolts and 100mm dia MS base plates 10mm guage for

fixing of vertical pipes 4-Nos anchor bolts & 40mm dia

pipes are fixed horizontally for 2 rows top, one pipes are

fixed with vertical pipes another one are fixed with elbows

and 25mm dia pipes are fixed horizontally for 2 rows below

top measure @ equal intervals including cutting, welding,

bending wherever necessary with suitable caps @ tops,

bottoms & corners finishing with mat/shining etc., complete

including cost and conveyance of all materials, labour for

all items of work, HOM of equipment with all lead and lift,

loading and unloading, transportation charges and all other

incidental charges etc., complete as per specification and

directions of Engineer-in-charge of the work. Ramps or

staircase for physically challengedsqm 10.00 6081.60 60816.00

29 47 8.19 Providing and fixing on wall surface 4.0 kg/sq.cm H.D.P.E.

rain down water pipes 110mm outer dia approved make

and brand with necessary special like shoes, bends, and

offsets fixed with iron clamps, wall plugs, screws, including

cost of materials, labour, complete as per specifications.

m 200.00 603.75 120750.00

RITES Ltd.,



P. No l No


2014-15

30 59 9.93 Providing and fixing factory made single leaft rigid GRP

Sandwich composite door shutter of 32mm thick, laminated

with two GRP skins with wood grain finish, fabricated using

U.V-stabilized Isopathic Gelcoat and on layer of 45 gsm E-

class Chopped strand Mat (CSM), impregnated with

orthopthalic polyster resin. The thickness of the skins shall

not be less than 1.5mm. Expanded Polystyrene (EPS)

structural foam panel of 29mm thickness and a density of

20Kg/m3 shall be used as core mterial. Wooden

reinforcements made of seasoned Salwood block of cross

section not less than 28mmX32mm and also necessary

salwood reinforcements for fixing the metal fittings such as

tower bolts, aldrops, handles etc shall be provided. A

structural adhesive compatible with EPS foam shall be

used for bonding the core material, the salwood

reinforcement and the skins.

The material and process for manufacturing the door

shutters shall confirm to RV/TIFAC composites Design

Centre standards and specifications and the door shutters

tested in confirmation to IS 4020-1994. The finish of shutter

will be plain colour White/Ivory/Beige/Light Grey or any

other colour using high quality pigments. Excluding cost of

fixtures and inclusive of supply of shutters to respective

work spot. Sqm 17.00 3360.00 57120.00

31 60 9.96 Providing and fixing 65mm X 125mm GRP Door frame

fabricated using E-Glass Chopped Strand Mat (CSM) U.V -

sablized Isopathlic Gelcoat and Isopthalic resin. The

thickness of the GRP Skin shall not be less than 2.0mm.

The door frame consists of four segments, which are

provided with plug-in-socket arrangement in-situ in the

mould. The segments are plugged in and are joined

together by means of screws. The GRP frame shall be

provided with wooden reinforcement on 6 locations for high

screw holding capacity for fixing metalling hold fast and

shall be consolidated by filling with medium density

foam/plaster of paris with fibre reinforcement. Six numbers

of 260mmX25mmX5mm size S shaped M.S. flat hold fast

shall be provided with the frame. m 50.00 593.25 29662.50

32 85 12.116 Providing and fixing to wall, ceiling and floor unplaticised

PVC 6.00 kgs/sqcm working pressure with pipe fittings,

wall clips etc and making good the wall, ceiling and floor for

sanitary pipelines including cost of all materials, labour

charges, HOM of acquirements and testing complete as

per specifications.

12.116.1 -do-110mm dia m 100.00 427.35 42735.00

12.116.2 -do-140mm dia m 150.00 694.05 104107.50

RITES Ltd.,



P. No l No


2014-15

33 68 11.37 KSRB 12-5.1: Construction brick masonry circular type

man hole 0.91m internal diameter at bottom 0.91m and

0.56mt dia at top with table moulded non modular bricks of

class designation 50 in cement mortar 1:4, inside cement

plastered 12mm thick with cement motar 1:3, finished with

floating coat of neat cement , foundation concrete of 1:3:6

mix using 40mm and down size granite metal and making

neccessary channel in cement concrete 1:2:4 with 20mm

and down size granite metal finished with floating coat of of

neat cement wit SFRC cover and frame (heavy duty, HD-

20 grade desination) 560mm internal diameter confirming

to IS 12592, total weight cover and frame to be not less

than 182 Kg fixed in cement concrete 1:2:4 20mm and

down size broken granite metal providing and removing

centering shuttering including cost of material , labour

charges HOM of machineries complete as per specification

NO KBS12.4Nos 2.00 12218.85 24437.70


manhole1.22m internal diameter at bottom 1.67m and

0.56m dia at topp with table moulded non modular bricks of








20 frade designation) 560mm internal diameter confirming






NO KBS12.4 Nos 1.00 18924.15 18924.15

















NO KBS12.4 Nos 1.00 28009.80 28009.80

RITES Ltd.,



P. No l No


2014-15

36 70 11.50 KSRB 12-8.1 : Constructing brick masonry inspection

chamber 455x610mm, and 450mm depth. (clear inside

dimension) for single pipeline, using table moulded non-

modular bricks of class designation 50 in cement mortar

1:5, C.I cover with frame (light duty) 455x610mm internal

dimensions. total weight of cover with frame to be not less

than 38 kg (weight of cover 23kg and weight of frame 15

kg) R.C.C. top slab with cement concrete 1:2:4 mix 20mm

and downsize granite metal, foundation concrete 1:5:10

with 40mm and downsize granite metal inside plastering

12mm thick with cement mortar 1:3, finish smooth with a

floating coat of cement on walls and bed concrete

complete as per standard design including cost of

materials, labour charges, curing complete as per

specifications. Nos 2.00 6357.75 12715.50

37 71 11.52 KSRB 12-8.2: Construction brick masonry inspection

chamber 500x700mm and 450mm depth (clear inside

dimension) for pipeline with one or two inlets, using table

moulded non modular bricks of class designation 50 in

cement mortar 1:5 , CI cover with frame ( light duty)

455x610mm internal dimension, total weight of cover with

frame to be not less than 38Kg (weight of cover 23kg and

weight of frame 15kg) RCC top slab with cement concrete

1:2:4 mix 20mm and downsize granite metal, foundation

concrete 1:5:10 with 40mm and downsize granite metal

inside plastering 12mm thick with cement mortar 1:3

finished smooth with floating coat of cement on walls and

bed concrete complete as per standard design including

cost of materials, labour charges, curing complete as per

specifications. Each 1.00 7207.20 7207.20

38 74 12.1 KSRB 11.1 : Providing and fixing white vitreous chine clay

water closet Indian type (Sqatting pan) of size 580mm

with foot rests, 100mm S or P tarp, 10 litres low level, PVC

flushing cistren (all are approved make) with fittings, CI

/MS brackets, 32mm dia flush pipe fittings and clamps,

overflow arrangements with special and 25mm mosquito

proof coupling of approved design, painting of fittings and

brackets, cutting and making good the wall and floor

wherever required, including cost of materials, labour

complete as per specifications. KBS 11. Pan 4.00 3580.50 14322.00

39 74 12.5 KSRB 11.5 Providing and fixing white vitreous china clay

water closet European type (pedestrial type, P trap) with

black solid plastic sheet and lead cover, CP brass hinges,

rubber buffer 10 litres low level PVC flushing chintrens with

fittings CI / MS bracket 50 mm dia meter flush bend with

fitting and clapms over flow arrangements with special and

25 mm mosquitto proof coupling of approved design and

painting of fitting and brackets cutting and making good the

wall & floor required including cost of material etc.

complete as per specification no. 11. Each 4.00 5191.20 20764.80

RITES Ltd.,



P. No l No


2014-15

40 75 12.11 KSRB.11.8.1: Providing and fixing white vitreousss china

clay wall corner type lipt front Urinal basin of size

340x410x265mm with 5 litres PVC automatic flushing

cistern, CI/MS brackets standar flush pipe and cp brass

speraders with brass union and GI clamps complete

painting of fitting and brackets cutting and making the good

wall and floor wherever required inlcuding cost material

labour complete as per specification No. KSB 11. unit 4.00 2869.65 11478.60

41 78 12.26 KSRB 11-11.4 : Providing and fixing white vitreous china

clay,flat back wash basin size 550X400mm with a single

15mm CP brass pillar tap with CI / MS brackets, 32mm CP

brass waste of standard pattern, painting of fittings and



complete as per specifications. No. KBS 11 unit 10.00 2790.90 27909.00

42 79 12.34 KSRB 11-13.2 : Providing and fixing Laboratoru sink of

white glazed fire clay of size 600x450x200mm with M.S /

C.I brackets , C.P brass chain with rubber plug, 32mm C.P

brass waste, tap with union, brass stop cock complete,

painting of fittings and brackets, cutting and making good

the wall and floor wherever required, including cost of

materials, labour complete as per specifications. KBS11unit 4.00 3486.00 13944.00

43 79 12.39 KSBR 11-15.1: Providing and fixing 600x450mm

bevellead edge mirror of superior glass with 6mm hard

board backing and fixed to wooden cleat with CP Screws,

washers, including cost of materials, labour complete as

per specification. unit 4.00 1304.10 5216.40

44 85 12.112.2 Providing stoneware gully trap of approved quality and

make fixing in CC1:2:4 and plastering with CM1:3 wherever

necessary. (Rate includes cost of all materials, fixtures and

lead) 15x10cms Each 15.00 283.50 4252.50

45 85 12.113.1 Providing and fixing C.I. Nahani trap of approved make

confirming to ISI specification and construction of cistern

in M-15 as per direction (Rate is inclusive of cost of

materials and fixtures and conveyance of materials to work

spot) 10x7.5cmsEach 30.00 262.50 7875.00

46 87 13.1 KSRB 13-1.1: Providing and fixing to wall, ceiling and floor

galvanised/mild steel tube 15mm dia nominal bore with

fittings (medium grade weight 1.27kg/mtr) B class including

cost of all materials, labour charges, HOM of equipments

and tetsing complete as per specifications. Specification

No. KBS 13.2.14/13.8

15mm dia m 50.00 187.95 9397.50

13.2 20mm dia m 75.00 228.90 17167.50

13.3 25mm dia m 100.00 313.95 31395.00

13.4 32mm dia m 100.00 359.10 35910.00

13.5 40mm dia m 50.00 446.25 22312.50

13.6 50mm dia m 150.00 522.90 78435.00

RITES Ltd.,



P. No l No


2014-15

47 87 13.14 KSRB 13-3.5: Providing and fixing in trenches

galvanised/mild steel tubes (medium grade) 40mm dia

nominal bore with all fittings (earth work in trenches to be

measured and paid for seperately) including cost of all

materials, labour charges, HOM of equipments and testing

complete as per specifications. Specification No. KBS

13.2.14/13.6m 50.00 393.75 19687.50







13.2.14/13.6m 100.00 451.50 45150.00

49 88 13.23 KSRB13-6.1-1 : Providing and fixing in position brass bib

cock of approved quality 15mm nominal bore including

cost of all materials, labour and HOM of equipments with

all leads complete as per specifications. Specification No.

KBS 13.2.2/13.3Each 15.00 228.90 3433.50

50 88 13.24 KSRB 13-6.1-2 Providing and fixing in position brass bib

cock of approved quality 20mm dia nominal bore including


all leads complete as per specifications. Specification

No.KBS 13.2.2/13.3Each 15.00 253.05 3795.75

51 88 13.27 KSRB 13-6.2-2: Providing and fixing in position brass stop

cock of approved quality 20mm nominal bore inlcuding

cost of all materials labour and HOM equipment with all

leads complete as per specification. KBS 13.2.2 /13.3Each 15.00 403.20 6048.00

52 88 13.34 KSRB 13.6.3.3 Providing and fixing in position brass gate

Valve with CI wheels of approved quality (screwed end )

25mm dia 25 mm nominal bore including cost of all

materials labour HOM of equipment with all leads complete

as per specification No. KBS 13.2.6 / 13.3 Each 10.00 610.05 6100.50






54 91 13.78 KSRB 13-11.1: Providing and placing on terrace,

polyethylene water storage tanks with man hole lid and

suitable locking arrangements, making holes of suitable

diameter for inlet, outlet and over flow pipes, including cost

of all materials, labour, transport charges, HOM of

equipments and testing complete as per specifications (for

1000 litre capacity). Specification No. KBS 13.22Nos 4.00 8767.50 35070.00

RITES Ltd.,



P. No l No


2014-15

55 98 14.8 KSRB 14.7-1: Providing and laying flooring with 1:2:4

cement concrete 40mm thick using broken granite metal of

20mm and down size laid to line and level in one layer and

finished with floating coat of neat cement including cost of

materials, labour, curing complete as per specifications.

Specification No. KBS 14.3Sqm 16.00 299.25 4788.00

56 103 14.36.2 KSRB 14.14-5: Providing ceramic tiles of size 30x30cms

of approved make, shade and size for flooring, treads of

steps and landings laid on a bed of 12mm thick, cement

mortar 1:3 mix flush pointing with white cement using

colour pigment, including cost of materials, labour, curing,

complete as per specifications. Specifications No.KBS

Sqm 74.00 969.15 71717.10

57 103 14.40 KSRB 14-17.1: Providing skirting, dado, rises of steps

with white glazed tiles 6mm thick on 10mm thick cement

plaster 1:3 and jointed with white cement slurry over rough

plaster surface (exculding cost of rough plastered surface

which should be measured and paid separetly) using

glazed tiles of approved make and size including cost of

labour ,materials complete as per specifications.

Specification No KBS 14.16,14.17.Sqm 102.00 1023.75 104422.50

58 104 14.45 Providing vitrified tiles 60cms x 60 cms size of approved

make, shade and size for flooring laid on a bed of 12mm

thick cement motar 1:3 mix, flush pointing with white

cement using coloured pigment , including cost of

materials, labour curing etc complete as per specification.Sqm 867.00 1079.40 935839.80

59 106 14.61 Providing and fixing 20mm thick gang saw water cut

sadarhalli grey granite in CM 1:4 proportion, cut to required

shape, pattern with paper joints, finished with cement

mortar using white cement and colour pigments to match

the colour of slab making through jointing with sealant,

grooves in joints including cost of curing.

14.61.2 minimum width of 900 mm Sqm 392.00 1939.35 760225.20

60 109 15.6 KSRB 15.1.5 Providing raised and cut pointing to coursed

stone masonry with cement mortar 1:4 20mm after raking

joints to depth of 20mm nicely lining, including cost of

materials, labour, curing complete as per specifications. Sqm 225.00 122.85 27641.25

61 110 15.16 KSRB 15-3.8: Providing 18mm thick cement plaster in

single coat with cement mortar 1:4 to brick masonry

including rounding off corners wherever required smooth

rendering, providing and removing scaffolding, including

cost of materials, labour, curing complete as per

specifications.Sqm 2370.00 183.75 435487.50

62 110 15.19 KSRB 15-3.11: Providing 20 mm thick cement plaster in

single coat with Cement Mortar 1:4 to stone masonry &

concrete surface including rounding off corners wherever

required smooth rendering . Providing and removing

scaffolding including cost of all materials, labour,curing

complete as per specifications . Sqm 1769.00 194.25 343628.25

RITES Ltd.,



P. No l No


2014-15

63 110 15.21 KSRB 15-3.13 : Providing 12mm thick Cement plaster in

single coat with cement mortar 1:3 to Ceiling including

rounding of corners wherever required smooth rendering:

providing and removing, Scaffolding including cost of

materials, labour, curing complete as per specifications.Sqm 1293.00 164.85 213151.05

64 110 15.30 KSRB 15-5.1: Providing rough cement plastering 15mm

thick in single coat with cement mortar 1:4, to brick

masonry for base of dadooing works with sand of approved

quality, providing and removing scaffolding, including cost

of materials, labour, curing complete as per specifications.

Sqm 102.00 145.95 14886.90

65 111 15.33 KSRB 15.7 - Providing lime rendering for plastering to wall

and ceiling including cost of materials, labour, curing

complete as per specifications. Sqm 3663.00 21.00 76923.00

66 111 15.36 KSRB 15.8.1 Providing and fixing plaster mesh 200mm

wide manufactured out of hot dipped galvanized iron of

nominal thcikness 0.35mm with a zinc coating of 120gms

per sqm width, along route of walls chipped for services,

junction between RCC and brick walls including cost of

materials, labour for fixing complete as per specifications

(length of mesh only be measured for payment).m 250.00 44.94 11235.00

67 113 15.51.2 KSRB 15-15.1: Providing and applying painting in two

coats with primer, Plastic Emulsion paint of approved

brand on wall surface to give an even approved shade

after throughly brushing the surface, free from mortar drops

and other foreign matter including preparing the surface

even and sand paper smooth, cost of materials, labour,

complete as per the specifications. Sqm 3663.00 84.00 307692.00

68 113 15.51.3 KSRB 15-15.2 : Extra over Item no 15.15.1for painting two

coats with Plastic Emulsion paint of approved brand and

shade on Ceiling complete as per the specifications.Sqm 1293.00 2.84 3672.12

69 117 15.74 KSRB 15-18.2 Providing and applying enamel metal paint

two coats (exculding priming coat) over new steel or other

metal surface brushing to give an even shade after

cleaning oil, grease, dirt and other foreign matters including

cost of materials, labour, complete as per specifications.Sqm 60.00 79.80 4788.00

TOTAL - Part A - KPWD SR Items 21737060.58

Total Quoted Cost of Part 'A' - KPWD - SR Items based on Percentage Quoted

Percentage above / below / at par of KPWD-SR 2014-15 (Bellary Circle) to be indicated for the above items

Percentage in

figure(+) / (-) / At par

Percentage in

wordsPlus / Minus / At par

RITES Ltd.,



P. No l No


2014-15

Amount in Figure

(Rupees)

Amount in Words

(Rupees)

RITES Ltd.,


SN Description Unit Qty Basic rate Amount in

Rs

PN Item No.

Part B - CPWD SR items

1 147 9.20 Providing and fixing ISI marked flush door shutters confirming to IS

2202 (Part I), decorative type, core of block board construction with

frame of First class hard wood and well matched teak 3 ply veneering

with vertical grains or cross bands and face veneers on both faces of

shutters.

9.20.1 35mm thick including ISI marked stainless steel butt hinges with

necessary screws. Sqm 52.00 2606.45 135535.40

2 174 10.14 Providing and fixing pressed steel door frames confirming to IS: 4351

manufactured from commercial mild steel sheet of 1.60mm thickness

including hinges jamb, lock jamb, bead and if required angle

threshold of mild steel angle of section 50 x 25mm, or base ties of

1.60mm pressed mild steel welded or rigidly fixed together by

mechanical means, adjustable lugs with split end tail to each jamb

including M S pressed butt hinges 2.5mm thick with mortar guards,

lock strike plate and shock absorrbers as specified and applying a

coat of approved steel primer after pre-treatment of the surface as

directed by Engineer-in-charge

10.14.1 Profile B10.14.1.

1

Fixing with adjustable lugs with split end tail to each jamb.

Ground floor metre 150.00 377.70 56655.00

3 156 9.96 Providing and Fixing Aluminium sliding door bolts ISI marked

anodised (anodic coating not less than grade AC 10 as per IS: 1868)

transparent or dyed to required colour or shade with nuts and screws

etc. complete.

9.96.2 250X16mmGround floor Each 15.00 189.00 2835.00

4 156 9.97 Providing and Fixing Aluminium tower bolts ISI marked anodised

(anodic coating not less than grade AC 10 as per IS: 1868)

transparent or dyed to required colour and shade with necessary

screws etc. complete.

9.97.2 250X 10mmGround floor Each 15.00 95.25 1428.75

5 156 9.100 Providing and Fixing Aluminium handles ISI marked anodised


transparent or dyed to required colour or shade with necessary

screws etc. complete.

9.100.1 125mm Ground floor Each 30.00 69.80 2094.00

6 156 9.101 Providing and Fixing Aluminium hanging floor door stopper ISI

marked anodisied (anodic coating not less than grade AC 10 as per

IS: 1868) transparent or dyed to required colour or shade with

necessary screws etc. complete.9.101.1 Single rubber stopper

Ground floor Each 15.00 37.50 562.50

7 219 13.47 Finishing walls with premium acrylic smooth exterior paint with

silicone additives of required shade:

13.47.1 New work (Two or more coats applied @ 1.43 ltr/10 sqm over and

including priming coat of exterior primer applied @ 2.20 kg/10sqm)

Sqm 1,769.00 94.95 167966.55

8 346 19.32 Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry

brick honey comb shaft with bricks and S.W. drain pipe 100 mm

diameter, 1.8 m long complete as per standard design

19.32.1 With common burnt clay F.P.S. (non modular) bricks of class

designation 7.5Each 2.00 18309.50 36619.00


Ref. DSR 2014

RITES Ltd.,



Rs

PN Item No.

Ref. DSR 2014

9 347 19.35 Providing and laying Non pressure NP-3 class (Medium duty) RCC

pipes including collars/spigot jointed with stiff mixture of cement

mortar in the proportion of 1:2( 1 cement : 2 fine sand) including

testing of joints etc complete

19.35.1 450mm dia RCC pipes metre 10.00 1920.50 19205.00

10 381 24.10 Supplying, assembling, lowering and fixing in vertical position in bore

well, ERW (Electric Resistance Welded) FE 410 mild steel screwed

and socketed/ plain ended casing pipes of required dia, conforming to

IS: 4270, of reputed & approved make, including painted with outside

surface with two coats of anticorrosive paint of approved brand and

manufacture, including required hire & labour charges, fittings &

accessories, all complete, for all depths, as per direction of Engineer-

in-charge.

24.10.2 150 mm nominal size dia having minimum wall thickness 5.00 mmmetre 60.00 1335.40 80124.00

Part B - CPWD SR Items 503025.20

Add cost index for Bellary @ 13.33% 67053.26


Total Quoted Cost of Part 'B' - CPWD SR Items based on Percentage Quoted

Percentage above / below / at par of CPWD-SR-2014 of CPWD to be indicated (including Cost Index) for the above items

Percentage in


Percentage in


Amount in

Figure

(Rupees)

Amount in

Words

(Rupees)

RITES Ltd.,


SN Description Unit Qty Rate Amount

Part- C Market Rate Items

1 Filling New approved Excavated

earth/moorum in sides of foundation upto

plinth in layers not exceeding 20cm in depth

compacting each deposited layer by ramming

after watering with a lead upto 5km and lift upto

3m including cost of all labour complete as per

the direction of engineer incharge.Cum 348.00

2 Providing grooves in plastering on walls 2.50 to

4.00cms wide and to the required depth as per

design and finished in cement mortar (1:3)

including curing etc., complete.

Ground floor Rmt 200.00

EXTERNAL WATER SUPPLY

3 Geophysical investigation of site for sinking

borewell for supplying drinking water to the

habitation either through hand pump, MWS or

PWSS by vertical electrical sounding by

adopting Venner or Schlumberger's method,

including reconnaissance survey of Geological

formation, geophysical investigation of existing

ground water in the vicinity indicating the

location of site, recommended depth of casing

pipe required to seal the top unconsolidated

formation including an extra depth of 1m in

consolidated formation for proper seating of

casing pipe, depth of drilling required to cover

full depth of aquifer proposed to be tapped,

probable yield and other information required

including transportation of instrument and

accessories to work site, engaging technical

personnel and labour required etc.,

Each

BW 1.00

4 Sinking Bore Well of 150mm dia clear using

super fast hydraulic rig of capacity 250 PSIG &

above 900 CMF & above in all strata including

over burden upto 20mtrs fixing of casing pipes,

collars and cap with necessary cutting,

threading and welding including transportation

of rig and supporting vehicle, crew charges and

cost of consumables etc., complete including

yield testing at the final depth with a minimum

working of compressor for one hour (excluding

cost of casing pipes, collars, cap etc.)

0- 50 mtrs RMtr 50.00


RITES Ltd.,



50- 100 mtrs RMtr 50.00

100- 150 mtrs RMtr 50.00

5 Supply, delivery, installation, testing,

commissioning of vertical centrifugal

submersible pump of 6.5HP capable of

pumping 335 lpm against an approximate total

head of 40m from all causes, including

providing 4Cx4sqmm 440V flat core double

sheathed waterproof submersible cable, Star

Delta starter, control panel with dry run

preventer, overload protection and backup

protection and capacitor as required, installed

inside a weather proof kiosk with locking

arrangement of approved design near the

borewell, including making necessary electrical

connections from mains to the starter panel

and from starter panel to the pump. Including

providing and fixing gun metal gate valve and

non-return valve of 50mm n.b on the delivery

side of the pump. Submersible pumps may be

of Atlanta/ KSB/ Kirloskar/ CALAMA/ Suguna

makes.

Each 1.00

6 Yield testing of Borewell at Final depth with a

minimum of 10 hours continuously with the

help of pump testing unit including the cost of

transportation charges, crew charges and cost

of consumables

Each

BW 1.00

TOTAL - Part C - Market Rate Items

The bidder is required to quote his rates in

figure and words for Part C-Market Rate

items

Total Amount in Words (Rupees)

RITES Ltd.,


Part A - KPWD SR 2014 - 15

POINT WIRING

Point wiring using Copper wire without

switch.

1 2.3 5 Supplying and wiring adopting loop system in

existing PVC Conduit / casing capping using

1100V grade, COPPER conductor flexible

multistrand FRLS PVC insulated,

2x1.5Sq.mm Cable confirming to the GTP

without switch, the other end of the wires shall

be terminated with sufficient loose length in a

wood/PVC round block complete for each outlet.

GROUP A

a2.3.1 5 Short point up to 3 Mtr from tapping point to out

let via switch box Point 10 144.00 1440.00

b2.3.2 5 Medium point above 3 Mtr up to 6 Mtr from

tapping point to out let via switch box Point 50 215.00 10750.00

c2.3.3 5 Long point above 6 Mtr up to 10 Mtr from


d2.3.4 6 Two outlet in a row, above 3 Mtr up to 6Mtr from

tapping point to out let via switches Point 50 423.00 21150.00

2 3.5 15 Supplying and flush mounting powder coated /

galvanized metal box suitable for mounting

modular switch plates. The box should be firmly

flush mounted after due groove cutting in

Brick/Stone/C.C wall

a 3.5.1 15 1-3 Way Each 90 91.00 8190.00

b 3.5.2 15 4-5 Way Each 40 98.00 3920.00

c 3.5.3 15 6 Way Each 95 121.00 11495.00

d 3.5.4 15 8 Way Each 15 140.00 2100.00

e 3.5.5 16 10-12 Way Each 25 159.00 3975.00

3 3.6 16 Supplying and fixing superior quality modular

switch mounting polycarbonate plate with

necessary supporting back plate with required

nos. of machine screws, bolts nuts etc.,

complete on the existing metal/PVC box.

a 3.6.1 16 1 to 3 Module Each 90 109.00 9810.00

b 3.6.2 16 4 Module Each 40 122.00 4880.00

c 3.6.3 16 6 Module Each 95 173.00 16435.00

d 3.6.4 16 8 Module Each 15 200.00 3000.00

e 3.6.6 16 12 Module Each 25 267.00 6675.00

Construction of Govt. Polytechnic College at Kampli in Bellary District for DTE - Electrical Works

Unit Qty Rate Amount SN Item No P.No. Description

RITES Ltd.,



4 3.7 16 Supplying and fixing of modular switch/

Socket/stepped electronic fan regulator/

dimmer/telephone socket etc on existing

modular switch plate as per IS 3854 and IS

1293

GROUP A

a 3.7.1 16 6 Amps one way. Each 300 63.00 18900.00

b 3.7.3 16 6 Amps 3way socket. Each 180 95.00 17100.00

c 3.7.4 16 Stepped Fan Regulator. Each 52 286.00 14872.00

d 3.7.8 16 6 Amps Bell push Each 2 87.00 174.00

e 3.7.9 16 32 Amps DP switch Each 20 164.00 3280.00

f 3.7.10 16 6/16 Amps universal socket Each 20 147.00 2940.00

g 3.7.11 16 TV / Telephone socket Each 10 82.00 820.00

h 3.7.12 16 RJ 45 / I.O. outlet Each 65 204.00 13260.00

5 1.12 3 Supplying and Fixing Metal Fan Box with Round

Hook.

No 52 92 4784

1.2 2 Concealed Conduit System

6 Supplying heavy gauge PVC conduit pipe

……mm dia .......mm thick confirming to IS 2509

with suitable size bends, metal/PVC junction

boxes adhesive paste etc., and running before

concreting the slab. The conduit should be tied

to the reinforcement rods by using binding wires

and unused ways of junction boxes and pipe

ends should be covered using PVC end

enclosures. run with 18SWG GI fish wire

wherever necessary

a 1.2.1 2 19/20 mm dia 2mm thick Mtr 1500 43.00 64500.00

b 1.2.2 2 25 mm dia 2mm thick Mtr 2600 57.00 148200.00

c 1.2.3 2 32 mm dia 2.5mm thick Mtr 300 90.00 27000.00

Groove Cutting

7 1.3 2 Supplying heavy gauge PVC Conduit Pipe -----

dia -- mm thick with suitable size bends, metal

junction boxes adhesive paste etc., by groove

cutting in the wall and fixing by bracing U or J

hooks and cement Plastering up to the wall

surface and run with 18 SWG GI fish wire run

throughout the conduit wherever necessary.

a 1.3.1 2 19/20mm dia 2mm thick Mtr 1100 56.00 61600.00

b 1.3.2 2 25mm dia 2mm thick Mtr 1500 58.00 87000.00

c 1.3.3 2 32mm dia 2.5mm thick Mtr 200 88.00 17600.00

8 1.8 3 Supplying and fixing of PVC casing and capping

on the wall or ceiling using necessary materials

like bends, screws at an interval of 300mm ….

Etc as required.

a 1.8.2 3 25mm Mtr 200 26.00 5200.00

b 1.8.4 3 38mm Mtr 200 39.00 7800.00

c 1.8.5 3 50mm Mtr 200 43.00 8600.00

RITES Ltd.,



9 2.5 6 Wiring for lighting/power circuit using one of

FRLS PVC insulated 1100v grade, multistrand

Copper with low conductor resistance single

core wire in open or concealed system of wiring

with specified IS-694:1990 & confirming to

GTP of GROUP-A

a 2.5.2 6 1.5 sqmm Mtr 2950 18.60 54870.00

b 2.5.3 6 2.5 sqmm Mtr 4200 29.20 122640.00

c 2.5.4 6 4 sqmm Mtr 1900 42.10 79990.00

d 2.5.5 6 6 sqmm Mtr 1650 63.80 105270.00

e 2.5.6 6 10 sqmm Mtr 100 108.00 10800.00

DISTRIBUTION BOARDS

10 6.17 47 Supplying and fixing regular MCB distribution

boards on wall / wood board / flush mounting

using required clamps, bolts, nuts etc., with

provision for fixing suitable type capacity MCB's

single phase / 3 phase / single door with powder

coated painting. Made out of 14 SWG MS

enclosure.

Double Door

a 6.17.7 47 4way TP&N Each 6 2399.00 14394.00

b 6.17.6 47 12 way SP & N Each 4 1622.00 6488.00

11 6.16 47 Supplying and fixing miniature circuit breakers

on existing MCB distribution boards using

necessary fixing materials and 'C' Type curve ,

indicator ON/OFF, energy cross-3 with Short

circuit breaking capacity of 10K and complete

wiring as required confirming to IEC 60898.

a 6.16.1 5-32 Amps SP Each 112 418 46816.00

b 6.16.3 5-32 Amps DP Each 4 849 3396.00

c 6.16.5 5-32 Amps TPN Each 6 1547 9282.00

d 6.16.6 40-63 Amps TPN Each 5 1936 9680.00

12 6.18 47 Supplying, fixing and wiring Earth Leakage

Miniature Circuit Breaker [ELMCB] 240/450V up

to 300mA sensitivity on existing wood/panel

board.

a 6.18.2 47 32-40 Amps 2 pole Each 4 2623.00 10492.00

b 6.18.3 47 32-40 Amps 4 pole Each 4 2936.00 11744.00

13 6.43 50 Supplying and fixing of Metal Socket set of

2pole and earth plugs and socket for

incorporating SP and TP MCB (Without MCB ).

The entire plug and socket shall b mounted in a

Thermoplastic / powder coated metal box &

wired Completely.

A) SP & N

a 6.43.2 b) 20 Amps Each 7 918.00 6426.00

RITES Ltd.,



SUPPLY OF FITTING

14 4.7 20 Supplying Box Type Suitable for 28 W T5 Single

/ Twin lamp & suspension mounted luminaire &

optical reflector,prewired with HF Electronic

Ballast,push fit type lamp holders & main

connectors. Channel cover shall be made of

CRCA MS Sheet and finishing is done with stove

enamelled white with end caps made of

engineering Plastic.

Group - A

a 4.7.1 1 X 4'-28 Watts Each 80 990.00 79200.00

b 4.7.2 2 X 4'-28 Watts Each 30 1680.00 50400.00

15 4.9 20 Supplying Surface mounted type mirror optic

luminaries for single / Twin 28 watts fluorescent

lamps cross rising of stove enameled deep

coloured M.S.low profile housing complete with

all accessories and high purity anodized

aluminium reflector assembling along with cross

louvers including necessary fluorescent tubes

with Energy Saving Electronic Ballast.

a 4.9.2 21 2 X 4'- 28 Watts Each 7 4028.00 28196.00

16 4.23 24 Supplying CFL mirror light fitting with 1x11W

CFL lamp, choke, Perspex cover and

completely wired for use on 230V 50Hz AC

supply. Each 4 648.00 2592.00

17 4.17 22 Supplying High pressure Metal halide street

light luminary suitable for use with high

pressure metal halide lamp with integrated

control gear & grey color powder coated. The

fitting shall be non corrosive pressure die cast

aluminum housing with high purity anodized

aluminium reflector with EPDM Gaskets suitable

for Outer Dia of pole 40mm - 60mm. Cable

Entry through a cable gland with toggle clips.

IP65 Protection for both optical & Electrical

Compartment. Bottom cover may be with Poly

carbonate/tempered/ toughened glass.

Luminaire efficiency should be >60 % &

ambient temperature > 35 deg C. High Intensity

Discharge Electro Magnetic Ballast with Copper

winding of Orthocyclic winding coil. Class H

insulated dual coated copper wire. Compliance

to IEC 61347-2-9 Safety & IEC 60923 -

Performance. Winding Temperature for HID

Ballast Tw = 130 deg C & temperature rise ?T =

70 deg C. Luminaire shall be suitable to operate

on 230/250 Volts 50 Hz AC supply finish

including wiring, ignitor, condenser. SS Toggles

for opening front hingeable glass.

RITES Ltd.,



a 4.17.2 23 150Watts Each 4 6300 25200.00

18 9.3 78 Supplying capacitor type ceiling fan complete

with down rod blades, shackle, canopies etc., for

operation on 230 volts, 50 cycles. Single phase

AC supply conforming to ISS-374-1979 and with

double ball bearing system.

9.3.1 48" Sweep (1200mm)

a 9.3.1.1 78 Regular model Each 52 2376.00 123552.00

19 9.2 78 Supplying of 1440rpm heavy duty exhaust fan

with bracket blades suitable to operate on 230V

50Hz, AC Supply complete.

a 9.2.1 78 12" Sweep (300mm) Each 10 3654.00 36540.00

20 4.2 20 Supplying and fixing PBBC/Bakelite straight or

slant batten holder and wiring with 60 W / 230

volts lamps.Each 12 88.00 1056.00

21 16.1 104 Supplying and fixing one of 230 volts bell or

buzzer and a flush type bell push with gang box

fixed on necessary wooden or rawl plugs using

NF screws. Each 2 145 290.00

FIXING CHARGES

22.0 17.2 108 Supplying and Fixing........mm dia class A GI

pipe bracket up to 2.7 meters long terminated

with a reducing collar of 40x25mm to which

extra pipe of 175mm length is fixed for fixing

MV/SV/MH/FTL street light fitting of all

capacities on rail/RCC/wall/tubular pole, using

suitable clamps, bolts ,nuts and wiring using

suitable capacity wires etc complete.

a 17.2.2 108 Using 32mm dia G.I.pipe Each 4 1140.00 4560.00

23 17.7 108 Fixing all types and all capacities of fluorescent

/ false ceiling / spot light / CFL / LED fittings

indoor on the wall / ceiling/ rafters / girders

using 23/0.0076” twin twisted PVC insulated

wires, required Nos of round blocks and clamps

a 17.7.1 108 On wall / ceiling / Rafter / Girders Each 121 98.00 11858.00

24 17.8 109 Fixing a ceiling / Wall mounting fan of all

capacities and all types to the existing 'S' hook

with fan regulator to the existing board together

with supplying and fixing 5 amps. ceiling rose,

necessary length of 23 / 0.0076 inch PVC

insulated twin twisted copper wire and wiring.Each 52 139.00 7228.00

RITES Ltd.,



25 17.12 109 Fixing one exhaust fan in the nitch already left

in the wall with bolts and nuts and 5 amps.

Ceiling rose with sufficient length of 23 / 0.0076

inch PVC insulated twin core wire.Each 10 412 4120.00

26 17.5 108 Fixing halogen/metal hallide / SVL / IL / LED

floodlight fitting over existing pole / wall ceiling

including clamps, bolts, nuts and wiring using

suitable capacity wires.Each 4 176.00 704.00

27 11.1 85 Supplying and drawing UTP-CAT 6E LAN

cable. Mt. 1600 23.00 36800.00

28 11.2 85 Supplying and drawing PVC flexible one pair

telephone unarmoured tinned copper cable.

a 11.2.2 85 2 Pair mtr 525 13 6825.00

28 1.4 2 Supplying and fixing sheet metal box made out

of 18 SWG sheet metal with necessary holes for

cable/conduit entry as required with one coat of

primer of approved make etc.

a 1.4.7 2 200 x 200 x 65 mm Each 4 157.00 628.00

29 7.4 55 Supplying of 1.1 KV LT UG cable having

aluminium conductor PVC insulated, extruded

inner sheated , galvanized , steel strip (except

2C X 10 Sq.mm wire armoured) confirming to IS

- 3975 : 1990 (No. of strip indicated in GTP) &

extruded PVC outer sheated armoured cable

with specified IS - 1554 Part - 1:1988 &

confirming to GTP of Group - A.

7.4.10 56 3.5 core 120 sqmm Mtr 60 556.80 33408.00

7.4.4 55 4 core 16 sqmm Mtr 120 140.40 16848.00

30 7.8 61 Labour charges for laying of 1.1 KV class UG

cable in existing trench GI pipe / stoneware pipe

/ on wall / on pole as required.

In existing trench / duct.

7.8.1 61 6 sqmm to 16 sqmm Mtr 120 10.80 1296.00

7.8.3 61 95 sqmm to 150 sqmm Mtr 60 21.60 1296.00

31 7.9 61 Digging of trench of 0.6m deep X 0.50 mtr wide

refilling the trench to the required ground level

and consolidating etc., complete. (As per Civil

SR KSRB I - 2, P - 7)

7.9.2 62 In soil (hard) Mtr 110 106.00 11660.00

32 7.10 62 Providing and filling sand in excavated trench

to cover already laid UG cable to adepth of 150

mm all - round the cable.Mtr 110 103.00 11330.00

RITES Ltd.,



33 7.14 62 Supplying and fixing of heavy duty cable

glands suitable for UG cable of 1.1 KV class

(metal only)

7.14.2 62 25 mm dia Each 4 86.00 344.00

7.14.4 62 45 mm dia Each 2 200.00 400.00

34 7.21 64 Supplying tinned copper lugs and crimping and

wiring to terminal point for wire of the following

sizes.

7.21.6 64 16 sqmm Each 16 11.31 180.96

7.21.12 64 120 sqmm Long Barrel Each 8 196.56 1572.48

EARTHING

35 7.2 55 Supplying fixing and wiring earth electrode for

grounding of lifts, transformers, DG sets etc.

using 40mm dia 2.9mm thick 2.5 mtr long GI

pipe with GI funnel with mesh and suitable size

reducer fixed on the top of the earth electrode.

The funnel should be enclosed in a CC chamber

of 400x400x400mm with a cast iron cover. The

earth electrode shall have staggered holes of

12mm dia and the electrode should be covered

150mm alround with alternate layers of salt and

charcoal from the bottom of the CC chamber.

The connection from the electrode is to be

established through GI strip using GI bolts and

nuts.Each 6 4317.00 25902.00

36 7.3 55 Supplying and running of GI/Copper strips for

grounding connections, using necessary fixing

materials as required.

GI strip

a 7.3.1 55 25 x 3 mm Mtr 120 77.00 9240.00

c 7.3.10 55 600 x 600 x 3 mm copper plate Each 2 7148.00 14296.00

37 7.22 64 Supplying and running GI/Copper conductor

for grounding and (along with other wires in

conduit system of wiring) using necessary

suitable size clamps, nails, guttas/spacers etc.,

Copper Wire.

b 7.22.6 64 8 SWG Mtr 80 107.70 8616.00

RITES Ltd.,



38 7.12 62 Supplying and fixing of class A (medium duty)

GI pipe of wall thickness not less than 3.25mm

on pole/wall/drain crossing with necessary

clamping arrangements for UG cable of 1.1 KV.

a 7.12.2 62 50mm Mtr 20 391.00 7820.00

b 7.12.5 62 100mm Mtr 15 920.00 13800.00

Part A - KPWD SR Items - Electrical works 1702546.44

Total Quoted Cost of Electrical Items based on Percentage Quoted

Amount in Figure

(Rupees)

Amount in Words

(Rupees)

Percentage above / below / at par of KPWD-SR 2014-15 for Electrical Works to be indicated for all the

above items

Percentage in

figure

(+) / (-) / At par

Percentage in

words

Plus / Minus / At par

RITES Ltd.,


SN Description of Work Unit Qty Rate Amount

Part B - Market Rate Items

Main Power Panel

1 Main Power Panel

Supply, installation, testing and commissioning of LT

Main Power Panel fabricated out of 16 SWG sheet

steel metal floor mounting type with all normal

practice like derusting, degreasing, phosphating,

powder coated to the approved make as per

specification, comprisiing of the following:-

Incomer

I. 250 A 3P MCCB 35 KA breaking capacity - 1No.

ii. 250A Al Bus bar (RYBN)

iii. RYB phase indication lamps - 1set

iv.0 - 500 V Voltmeter with selector switch -1no

v.0 - 300 A Ammeter With selector switch-1no

vi. 250 A 4P Change Over Switch - 1no

Outgoing

i125 A 3P +NL - 1 No

i 63 A 16 KA 3P MCCB - 12 nos.

ii. 40 A 4Pole MCB - 4nos. Nos 1.00

2 Sub MV Panel


Sub MV Panel fabricated out of 16 SWG sheet steel

metal floor mounting type with all normal practice like

derusting, degreasing, phosphating, powder coated

to the approved make as per specification,

comprisiing of the following:-

Incomer




iv.0-500 V Voltmeter with selector switch -1no


Outgoing

iii. 63 A 4Pole 16 KA MCCB - 12 nos.

iii. 40 A 4Pole MCB - 3 nos. Nos 1.00

Part B - Market rate Items - Electrical works

The bidder is required to quote his rates in figure

and words for Part B-Non SR items of Electrical

works

Construction of Govt. Polytechnic College at Kampli in Bellary District for DTE - Electrical Works


RITES Ltd.,



Civil Works




Electrical Works



TOTAL - Schedule II `

TOTAL

(in Words) - Rupees

CConstruction of Govt. Polytechnic College at Kartagi in Koppal

District for DTE

Abstract - Schedule - II

RITES Ltd.,



P. No l No












machineries, as per drawing and technical specification. Cum 715.00 54.60 39039.00










rock without blasting for foundation of buildings, water

supply, sanitary lines and electrical conduits either in pits or

in trenches not exceeding 1.5m in depth, stacking the



complete as per specifications. Specification. No KBS 2.1.d

/ 2.9.4 / 2.18 / 2.19Cum 326.00 796.95 259805.70


rock by chiselling and/or wedging, where blasting is

prohibited for foundation of buildings, water supply, sanitary

lines and electrical conduits either in pits or in trenches

1.5m in depth stacking the excavated stuff clear from the

edge of excavation with lead upto 50m including cost of

labour complete as per specifications. Specification No.

KBS cum 196.00 1143.45 224116.20







AmountRate

Construction of Govt. Polytechnic College at Kartagi in Koppal District for DTE

Sl No Bellary SR -

2014-15

RITES Ltd.,



P. No l No


2014-15












per specifications.(Plinth area of the building at ground floor

only shall be measured ) Specification No. KBS 3.2.6 /

3.2.7 Sqm 1320.00 105.00 138600.00







of all materials, labour, HOM of machinery, curing complete

as per specifications. specification No KBS 4.1,4.2

Cum 195.00 4250.40 828828.00









KBS 4.1,4.2 15.00 4753.35 71300.25















KBS 4.1,4.6 cum 755.00 5835.90 4406104.50









complete as per specifications. Specification No. 4.1, 4.6Sqm 68.00 464.10 31558.80





specifications. Specification No. KBS 4.6.2 Sqm 561.00 228.90 128412.90

RITES Ltd.,



P. No l No


2014-15






ground level , Specification No. KBS 4.6.2Sqm 1236.00 305.55 377659.80





















21 17 4.46 KSRB 4.9.2 : Providing T.M.T steel reinforcement for R.C.C

work including straightening, cutting, bending, hooking,

placing in position, lapping and / or welding wherever

required, tying with binding wire and anchoring to the

adjoining members wherever necessary complete as per

design (laps, hooks and wastage shall not be measured

and paid) cost of materials, labour, HOM of machinery

complete as per specifications. Specification No. KBS 4.6.3



basalt size stone masonry in foundation with cement mortar

1:6, stone hammered dressed in courses not less than

20cms high, bond stones at two m. apart in each course

including cost of materials, labour, curing complete as per

specifications. KBS 5.1.13 Cum 221.00 3992.10 882254.10






as per specifications, KBS 5.1.13 Cum 81.00 4912.95 397948.95

24 28 6.3 KSRB 6-1.3 : Providing and constructing burnt brick

masonry for basement and superstructure with approved

quality of non-modular bricks of standard size of class


materials, labour charges, scaffolding, curing complete as

per specifications. Specification No. KBS 6.2 cum 484.00 5238.45 2535409.80

RITES Ltd.,



P. No l No


2014-15

25 28 6.25 KSRB 6-7.4 : Construction of partition wall 11.2 cm thick

with non modular table moulded burnt brick of class


materials labour charges, scaffolding, curing complete as

per specification KBS 6.2 Sqm 41.00 704.55 28886.55




20x5mm size with top and bottom rails of 'T' iron sections of

40x40x6mm with 38mm dia steel pulleys complete with bolt

and nuts locking arrangements, stoppers, handles on both

sides with 7.5cms openings at 10cms c to c applying a

priming coat of red lead paint . Cost of mateials, labour,







finish painted with a polyester based paint 20 microns thick.

The size of profiles is approximately 46x52mm for external

frames, 46x46mm section for shutters, 46x70mm section

for centre mullion / transom and 18x31mm section is for

fixing glasses. The section should be cut to length joint

mitred and assembling by means of corner brackets made

out of cold rolled annealed strips of 1.2mm thick duly








screws.- with 4mm float glass and with guard bars.

Sqm 140.00 4200.00 588000.00
























m 200.00 603.75 120750.00

RITES Ltd.,



P. No l No


2014-15
























work spot. Sqm 17.00 3360.00 57120.00














shall be provided with the frame.m 50.00 593.25 29662.50


PVC 6.00 kgs/sqcm working pressure with pipe fittings, wall

clips etc and making good the wall, ceiling and floor for



per specifications.

12.116.1 -do-110mm dia m 100.00 427.35 42735.00

12.116.2 -do-140mm dia m 150.00 694.05 104107.50

RITES Ltd.,



P. No l No


2014-15










neat cement wit SFRC cover and frame (heavy duty, HD-20

grade desination) 560mm internal diameter confirming to IS

12592, total weight cover and frame to be not less than 182

Kg fixed in cement concrete 1:2:4 20mm and down size

broken granite metal providing and removing centering

shuttering including cost of material , labour charges HOM

of machineries complete as per specification NO KBS12.4

Nos 2.00 12218.85 24437.70










neat cement wit SFRC cover and frame (heavy duty, HD-20

frade designation) 560mm internal diameter confirming to

IS 12592, total weight cover and frame to be not less than

182 Kg fixed in cement concrete 1:2:4 20mm and down

size broken granite metal providing and removing centering

shuttering including cost of material , labour charges HOM

of machineries complete as per specification NO KBS12.4

Nos 1.00 18924.15 18924.15

















NO KBS12.4 Nos 1.00 28009.80 28009.80

RITES Ltd.,



P. No l No


2014-15












floating coat of cement on walls and bed concrete complete

as per standard design including cost of materials, labour

charges, curing complete as per specifications.

Nos 2.00 6357.75 12715.50



















flushing cistren (all are approved make) with fittings, CI /MS

brackets, 32mm dia flush pipe fittings and clamps, overflow

arrangements with special and 25mm mosquito proof

coupling of approved design, painting of fittings and












wall & floor required including cost of material etc. complete

as per specification no. 11. Each 4.00 5191.20 20764.80








labour complete as per specification No. KSB 11. unit 4.00 2869.65 11478.60

RITES Ltd.,



P. No l No


2014-15



















per specification. unit 4.00 1304.10 5216.40




lead) 15x10cms Each 15.00 283.50 4252.50


confirming to ISI specification and construction of cistern in

M-15 as per direction (Rate is inclusive of cost of materials

and fixtures and conveyance of materials to work spot)

10x7.5cms Each 30.00 262.50 7875.00






No. KBS 13.2.14/13.8

15mm dia m 50.00 187.95 9397.50

13.2 20mm dia m 75.00 228.90 17167.50

13.3 25mm dia m 100.00 313.95 31395.00

13.4 32mm dia m 100.00 359.10 35910.00

13.5 40mm dia m 50.00 446.25 22312.50

13.6 50mm dia m 150.00 522.90 78435.00







13.2.14/13.6 m 50.00 393.75 19687.50







13.2.14/13.6 m 100.00 451.50 45150.00

RITES Ltd.,



P. No l No


2014-15



cost of all materials, labour and HOM of equipments with all

leads complete as per specifications. Specification No.

KBS 13.2.2/13.3 Each 15.00 228.90 3433.50



cost of all materials, labour and HOM of equipments with all

leads complete as per specifications. Specification No.KBS

13.2.2/13.3 Each 15.00 253.05 3795.75





















1000 litre capacity). Specification No. KBS 13.22 Nos 4.00 8767.50 35070.00






Specification No. KBS 14.3 Sqm 16.00 299.25 4788.00







Sqm 74.00 969.15 71717.10








Specification No KBS 14.16,14.17. Sqm 102.00 1023.75 104422.50

RITES Ltd.,



P. No l No


2014-15

















61 110 15.16 KSRB 15-3.8: Providing 18mm thick cement plaster in

single coat with cement mortar 1:4 to brick masonry


rendering, providing and removing scaffolding, including

cost of materials, labour, curing complete as per

specifications. Sqm 2370.00 183.75 435487.50






complete as per specifications . Sqm 1769.00 194.25 343628.25











Sqm 102.00 145.95 14886.90











RITES Ltd.,



P. No l No


2014-15

67 113 15.51.2 KSRB 15-15.1: Providing and applying painting in two coats

with primer, Plastic Emulsion paint of approved brand on

wall surface to give an even approved shade after

throughly brushing the surface, free from mortar drops and

other foreign matter including preparing the surface even

and sand paper smooth, cost of materials, labour,

complete as per the specifications.Sqm 3601.00 84.00 302484.00











Amount in Figure

(Rupees)

Amount in Words

(Rupees)

Percentage above / below / at par of KPWD-SR 2014-15 (Bellary Circle) to be indicated for the above items

Percentage

in figure

(+) / (-) / At par

Percentage

in words


RITES Ltd.,



Rs

PN Item No.






shutters.





including hinges jamb, lock jamb, bead and if required angle

threshold of mild steel angle of section 50 x 25mm, or base ties of

1.60mm pressed mild steel welded or rigidly fixed together by

mechanical means, adjustable lugs with split end tail to each jamb

including M S pressed butt hinges 2.5mm thick with mortar guards,

lock strike plate and shock absorrbers as specified and applying a

coat of approved steel primer after pre-treatment of the surface as

directed by Engineer-in-charge10.14.1 Profile B10.14.1.

1

Fixing with adjustable lugs with split end tail to each jamb.


3 156 9.96 Providing and Fixing Aluminium sliding door bolts ISI marked

anodised (anodic coating not less than grade AC 10 as per IS: 1868)

transparent or dyed to required colour or shade with nuts and screws

etc. complete.9.96.2 250X16mm




transparent or dyed to required colour and shade with necessary

screws etc. complete.9.97.2 250X 10mm


5 156 9.100 Providing and Fixing Aluminium handles ISI marked anodised


transparent or dyed to required colour or shade with necessary

screws etc. complete.9.100.1 125mm Ground floor Each 30.00 69.80 2094.00

6 156 9.101 Providing and Fixing Aluminium hanging floor door stopper ISI

marked anodisied (anodic coating not less than grade AC 10 as per

IS: 1868) transparent or dyed to required colour or shade with

necessary screws etc. complete.9.101.1 Single rubber stopper


7 219 13.47 Finishing walls with premium acrylic smooth exterior paint with

silicone additives of required shade:13.47.1 New work (Two or more coats applied @ 1.43 ltr/10 sqm over and

including priming coat of exterior primer applied @ 2.20 kg/10sqm)Sqm 1,769.00 94.95 167966.55





designation 7.5 Each 2.00 18309.50 36619.00


pipes including collars/spigot jointed with stiff mixture of cement

mortar in the proportion of 1:2( 1 cement : 2 fine sand) including

testing of joints etc complete19.35.1 450mm dia RCC pipes metre 10.00 1920.50 19205.00


Ref. DSR 2014

RITES Ltd.,



Rs

PN Item No.

Ref. DSR 2014


well, ERW (Electric Resistance Welded) FE 410 mild steel screwed

and socketed/ plain ended casing pipes of required dia, conforming to

IS: 4270, of reputed & approved make, including painted with outside

surface

with two coats of anticorrosive paint of approved brand and


accessories, all complete, for all depths, as per direction of Engineer-

in-charge.24.10.2 150 mm nominal size dia having minimum wall thickness 5.00 mm metre 60.00 1335.40 80124.00






Percentage

in figure

(+) / (-) / At par

Percentage

in words


Amount in

Figure

(Rupees)

Amount in

Words

(Rupees)

RITES Ltd.,


































personnel and labour required etc., Each

BW 1.00













RITES Ltd.,



0- 50 mtrs RMtr 50.00

50- 100 mtrs RMtr 50.00

100- 150 mtrs RMtr 50.00




















makes. Each 1.00





of consumables

Each

BW 1.00

Total - Part C - Market Rate Items



items


RITES Ltd.,



POINT WIRING


switch.









GROUP A














a 3.5.1 15 1-3 Way Each 90 91.00 8190.00

b 3.5.2 15 4-5 Way Each 40 98.00 3920.00

c 3.5.3 15 6 Way Each 95 121.00 11495.00

d 3.5.4 15 8 Way Each 15 140.00 2100.00

e 3.5.5 16 10-12 Way Each 25 159.00 3975.00






a 3.6.1 16 1 to 3 Module Each 90 109.00 9810.00

b 3.6.2 16 4 Module Each 40 122.00 4880.00

c 3.6.3 16 6 Module Each 95 173.00 16435.00

d 3.6.4 16 8 Module Each 15 200.00 3000.00

e 3.6.6 16 12 Module Each 25 267.00 6675.00

Construction of Govt. Polytechnic College at Kartagi in Koppal District for DTE - Electrical Works


RITES Ltd.,







1293

GROUP A










Hook.

No 52 92 4784











wherever necessary




Groove Cutting














Etc as required.

a 1.8.2 3 25mm Mtr 200 26.00 5200.00

b 1.8.4 3 38mm Mtr 200 39.00 7800.00

c 1.8.5 3 50mm Mtr 200 43.00 8600.00

RITES Ltd.,








GTP of GROUP-A

a 2.5.2 6 1.5 sqmm Mtr 2950 18.60 54870.00

b 2.5.3 6 2.5 sqmm Mtr 4200 29.20 122640.00

c 2.5.4 6 4 sqmm Mtr 1900 42.10 79990.00

d 2.5.5 6 6 sqmm Mtr 1650 63.80 105270.00

e 2.5.6 6 10 sqmm Mtr 100 108.00 10800.00

DISTRIBUTION BOARDS







enclosure.

Double Door

a 6.17.7 47 4way TP&N Each 6 2399.00 14394.00

b 6.17.6 47 12 way SP & N Each 4 1622.00 6488.00







a 6.16.1 5-32 Amps SP Each 112 418 46816.00

b 6.16.3 5-32 Amps DP Each 4 849 3396.00

c 6.16.5 5-32 Amps TPN Each 6 1547 9282.00

d 6.16.6 40-63 Amps TPN Each 5 1936 9680.00




board.

a 6.18.2 47 32-40 Amps 2 pole Each 4 2623.00 10492.00

b 6.18.3 47 32-40 Amps 4 pole Each 4 2936.00 11744.00






wired Completely.

A) SP & N

a 6.43.2 b) 20 Amps Each 7 918.00 6426.00

RITES Ltd.,



SUPPLY OF FITTING









Group - A

a 4.7.1 1 X 4'-28 Watts Each 80 990.00 79200.00

b 4.7.2 2 X 4'-28 Watts Each 30 1680.00 50400.00









a 4.9.2 21 2 X 4'- 28 Watts Each 7 4028.00 28196.00




supply. Each 4 648.00 2592.00


















to IEC 61347-2-9 Safety & IEC 60923 -







RITES Ltd.,



a 4.17.2 23 150Watts Each 4 6300 25200.00






9.3.1 48" Sweep (1200mm)





a 9.2.1 78 12" Sweep (300mm) Each 10 3654.00 36540.00








FIXING CHARGES






















RITES Ltd.,












cable. Mt. 1600 23.00 36800.00



a 11.2.2 85 2 Pair mtr 525 13 6825.00





a 1.4.7 2 200 x 200 x 65 mm Each 4 157.00 628.00









7.4.10 56 3.5 core 120 sqmm Mtr 60 556.80 33408.00

7.4.4 55 4 core 16 sqmm Mtr 120 140.40 16848.00





7.8.1 61 6 sqmm to 16 sqmm Mtr 120 10.80 1296.00

7.8.3 61 95 sqmm to 150 sqmm Mtr 60 21.60 1296.00




SR KSRB I - 2, P - 7)

7.9.2 62 In soil (hard) Mtr 110 106.00 11660.00




RITES Ltd.,





(metal only)

7.14.2 62 25 mm dia Each 4 86.00 344.00

7.14.4 62 45 mm dia Each 2 200.00 400.00



sizes.

7.21.6 64 16 sqmm Each 16 11.31 180.96


EARTHING














nuts.Each 6 4317.00 25902.00




GI strip

a 7.3.1 55 25 x 3 mm Mtr 120 77.00 9240.00






Copper Wire.

b 7.22.6 64 8 SWG Mtr 80 107.70 8616.00

RITES Ltd.,







a 7.12.2 62 50mm Mtr 20 391.00 7820.00

b 7.12.5 62 100mm Mtr 15 920.00 13800.00



Amount in Figure

(Rupees)

Amount in Words

(Rupees)


above items

Percentage in

figure

(+) / (-) / At par

Percentage in

words


RITES Ltd.,




Main Power Panel

1 Main Power Panel







Incomer







Outgoing

i125 A 3P +NL - 1 No



2 Sub MV Panel







Incomer






Outgoing






works

Construction of Govt. Polytechnic College at Kartagi in Koppal District for DTE - Electrical Works


RITES Ltd.,



Civil Works




Electrical Works



TOTAL - Schedule III `

TOTAL

(in Words) - Rupees

Construction of Govt. Polytechnic College at Surpur in Yadgir

District for DTE

Abstract - Schedule - III

RITES Ltd.,



P. No l No












machineries, as per drawing and technical specification.Cum 715.00 55.54 39711.10










rock by blasting for foundation of buildings, water supply,

sanitary lines and electrical conduits either in pits or in

trenches not exceeding 1.5m in depth, stacking the



complete as per specifications. Specification. No KBS

2.1.C/ 2.9.4 / 2.18 / 2.19 Cum 431.00 465.34 200561.54


rock by blasting for foundation of buildings, water supply,

sanitary lines and electrical conduits either in pits or in

trenches 1.5m in depth stacking the excavated stuff clear

from the edge of excavation with lead upto 50m including

cost of labour complete as per specifications. Specification

No. KBS 2.1.D/2.3.4/2.18/2.19 cum 431.00 466.40 201018.40







AmountRate

Construction of Govt. Polytechnic College at Surpur in Yadgiri District for DTE

Sl No Kalburgi SR -

2014-15

RITES Ltd.,



P. No l No

AmountRateSl No Kalburgi SR -

2014-15












per specifications.(Plinth area of the building at ground

floor only shall be measured ) Specification No. KBS 3.2.6

/ 3.2.7Sqm 1275.00 106.00 135150.00







of all materials, labour, HOM of machinery, curing

complete as per specifications. specification No KBS

4.1,4.2 Cum 186.00 4588.74 853505.64









KBS 4.1,4.2 Cum 14.00 5062.56 70875.84















KBS 4.1,4.6 cum 715.00 6153.30 4399609.50









complete as per specifications. Specification No. 4.1, 4.6Sqm 68.00 490.78 33373.04

RITES Ltd.,



P. No l No


2014-15





specifications. Specification No. KBS 4.6.2Sqm 523.00 223.66 116974.18

13 15 4.28.1 KSRB 4-6.2: Providing and removing centering, shuttering,





ground level , Specification No. KBS 4.6.2Sqm 1196.00 397.50 475410.00





Specification No. KBS 4.6.2Sqm 1094.00 345.56 378042.64
















18 17 4.46 KSRB 4.9.2 : Providing T.M.T steel reinforcement for

R.C.C work including straightening, cutting, bending,

hooking, placing in position, lapping and / or welding

wherever required, tying with binding wire and anchoring to

the adjoining members wherever necessary complete as

per design (laps, hooks and wastage shall not be

measured and paid) cost of materials, labour, HOM of

machinery complete as per specifications. Specification

No. KBS 4.6.3



basalt size stone masonry in foundation with cement

mortar 1:6, stone hammered dressed in courses not less

than 20cms high, bond stones at two m. apart in each


as per specifications. KBS 5.1.13Cum 297.00 4585.56 1361911.32

RITES Ltd.,



P. No l No


2014-15






as per specifications, KBS 5.1.13Cum 74.00 5651.92 418242.08

21 25 5.27 KSRB 5-14: Providing and constructing precast concrete

solid blocks with compressive strength not less than

35Kg/Sqm with cement mortar 1:4 masonry (quoin, jamb,

closer blocks) with solid concrete blocks of size

40X20X20cms conforming to 1.S: 2185/1965 in

superstructure including cost of materials, labour charges,

scaffolding, curing complete as per specifications.Sqm 2017.00 932.80 1881457.60

22 25 5.28 KSRB 5-15: Providing and constructing non-load bearing

wall with cement concrete solid blocks with compressive

strength not less than 35kg/sqm with cement mortar 1:4

(Jamb, closer blocks) with blocks of size 40X10X20cms.

(lxbxh) conforming to IS 2185/1965 in superstructure

including cost of materials, labour charges, scaffolding,

curing complete as per specifications. Sqm 41.00 672.04 27553.64




20x5mm size with top and bottom rails of 'T' iron sections

of 40x40x6mm with 38mm dia steel pulleys complete with

bolt and nuts locking arrangements, stoppers, handles on

both sides with 7.5cms openings at 10cms c to c applying

a priming coat of red lead paint . Cost of mateials, labour,







finish painted with a polyester based paint 20 microns

thick. The size of profiles is approximately 46x52mm for

external frames, 46x46mm section for shutters, 46x70mm

section for centre mullion / transom and 18x31mm section

is for fixing glasses. The section should be cut to length

joint mitred and assembling by means of corner brackets

made out of cold rolled annealed strips of 1.2mm thick duly








screws.- with 4mm float glass and with guard bars.

Sqm 140.00 4240.00 593600.00

RITES Ltd.,



P. No l No


2014-15
























m 200.00 609.50 121900.00
























work spot.Sqm 12.00 3392.00 40704.00

RITES Ltd.,



P. No l No


2014-15














shall be provided with the frame. m 35.00 598.90 20961.50


PVC 6.00 kgs/sqcm working pressure with pipe fittings,

wall clips etc and making good the wall, ceiling and floor for



per specifications.

12.116.1 -do-110mm dia m 100.00 431.42 43142.00

12.116.2 -do-140mm dia m 150.00 700.66 105099.00











20 grade desination) 560mm internal diameter confirming






NO KBS12.4Nos 2.00 12502.70 25005.40

















NO KBS12.4Nos 1.00 19224.16 19224.16

RITES Ltd.,



P. No l No


2014-15

















NO KBS12.4Nos 1.00 28533.08 28533.08












floating coat of cement on walls and bed concrete

complete as per standard design including cost of

materials, labour charges, curing complete as per

specifications.Nos 2.00 6472.36 12944.72



















flushing cistren (all are approved make) with fittings, CI

/MS brackets, 32mm dia flush pipe fittings and clamps,

overflow arrangements with special and 25mm mosquito

proof coupling of approved design, painting of fittings and




RITES Ltd.,



P. No l No


2014-15









wall & floor required including cost of material etc.

complete as per specification no. 11. Each 4.00 5238.52 20954.08








labour complete as per specification No. KSB 11.unit 4.00 2896.98 11587.92



















per specification.unit 4.00 1302.74 5210.96




lead) 15x10cms Each 15.00 265.00 3975.00


confirming to ISI specification and construction of cistern

in M-15 as per direction (Rate is inclusive of cost of

materials and fixtures and conveyance of materials to work

spot) 10x7.5cmsEach 30.00 233.20 6996.00

RITES Ltd.,



P. No l No


2014-15






No. KBS 13.2.14/13.8

13.1 15mm dia m 50.00 189.74 9487.00

13.2 20mm dia m 75.00 231.08 17331.00

13.3 25mm dia m 100.00 316.94 31694.00

13.4 32mm dia m 100.00 362.52 36252.00

13.5 40mm dia m 50.00 450.50 22525.00

13.6 50mm dia m 150.00 526.82 79023.00







13.2.14/13.6m 50.00 397.50 19875.00







13.2.14/13.6m 100.00 455.80 45580.00




all leads complete as per specifications. Specification No.

KBS 13.2.2/13.3 Each 15.00 231.08 3466.20




all leads complete as per specifications. Specification

No.KBS 13.2.2/13.3Each 15.00 255.46 3831.90















RITES Ltd.,



P. No l No


2014-15







1000 litre capacity). Specification No. KBS 13.22Nos 4.00 8831.92 35327.68






Specification No. KBS 14.3Sqm 16.00 310.58 4969.28







Sqm 43.00 1066.36 45853.48








Specification No KBS 14.16,14.17. Sqm 66.00 1044.10 68910.60

















RITES Ltd.,



P. No l No


2014-15

58 110 15.16 KSRB 15-3.8 Providing 18 mm thick cement plaster in

single coat with Cement Mortar 1:4 to brick masonry


rendering . Providing and removing scaffolding including

cost of all materials, labour,curing complete as per

specifications .Sqm 2314.00 201.40 466039.60






complete as per specifications .Sqm 1769.00 213.06 376903.14





materials, labour, curing complete as per specifications.Sqm 1200.00 177.02 212424.00






Sqm 66.00 161.12 10633.92











64 113 15.51.2 KSRB 15-15.1: Providing and applying painting in two

coats with primer, Plastic Emulsion paint of approved

brand on wall surface to give an even approved shade

after throughly brushing the surface, free from mortar drops

and other foreign matter including preparing the surface

even and sand paper smooth, cost of materials, labour,

complete as per the specifications. Sqm 3514.00 84.80 297987.20




RITES Ltd.,



P. No l No


2014-15








Amount in Figure

(Rupees)

Amount in Words

(Rupees)

Percentage above / below / at par of KPWD-SR 2014-15 (Kalburgi Circle) to be indicated for the above items

Percentage in

figure

(+) / (-) / At par

Percentage in

words


RITES Ltd.,



Rs

PN Item No.


1 72 2.7 Earth work in excavation by mechanical means (Hydraulic excavator) /

manual means over areas (exceeding 30 cm in depth, 1.5 m in width as

well as 10 sqm on plan) including disposal of excavated earth, lead upto

50 m and lift upto 1.5 m, disposed earth to be levelled and neatly

dressed.

2.7.1 Ordinary rock cum 894.00 244.60 218672.40

2.7.2 Hard rock (requiring blasting) cum 894.00 418.15 373826.10

2 87 4.17 Making plinth protection 50mm thick of cement concrete 1:3:6 ( 1

cement: 3 coarse sand: 6 graded stone aggregate 20mm nominal size)

over 75mm thick bed of dry brick ballast 40mm nominal size, well

rammed and consolidated and grouted with fine sand, including

finishing the top smooth.Sqm 180.00 419.30 75474.00





shutters.





including hinges jamb, lock jamb, bead and if required angle threshold

of mild steel angle of section 50 x 25mm, or base ties of 1.60mm

pressed mild steel welded or rigidly fixed together by mechanical

means, adjustable lugs with split end tail to each jamb including M S

pressed butt hinges 2.5mm thick with mortar guards, lock strike plate

and shock absorrbers as specified and applying a coat of approved

steel primer after pre-treatment of the surface as directed by Engineer-

in-charge

10.14.1 Profile B

10.14.1.1 Fixing with adjustable lugs with split end tail to each jamb.


3 156 9.96 Providing and Fixing Aluminium sliding door bolts ISI marked anodised

(anodic coating not less than grade AC 10 as per IS: 1868) transparent

or dyed to required colour or shade with nuts and screws etc. complete.

9.96.2 250X16mm



(anodic coating not less than grade AC 10 as per IS: 1868) transparent

or dyed to required colour and shade with necessary screws etc.

complete.

9.97.2 250X 10mm


5 156 9.100 Providing and Fixing Aluminium handles ISI marked anodised (anodic

coating not less than grade AC 10 as per IS: 1868) transparent or dyed

to required colour or shade with necessary screws etc. complete.

9.100.1 125mm


6 156 9.101 Providing and Fixing Aluminium hanging floor door stopper ISI marked

anodisied (anodic coating not less than grade AC 10 as per IS: 1868)

transparent or dyed to required colour or shade with necessary screws

etc. complete.


Ref. DSR 2014

RITES Ltd.,



Rs

PN Item No.

Ref. DSR 2014

9.101.1 Single rubber stopper


7 219 13.47 Finishing walls with premium acrylic smooth exterior paint with silicone

additives of required shade:

13.47.1 New work (Two or more coats applied @ 1.43 ltr/10 sqm over and

including priming coat of exterior primer applied @ 2.20 kg/10sqm)

Sqm 1,769.00 94.95 167966.55





designation 7.5 Each 2.00 18309.50 36619.00


pipes including collars/spigot jointed with stiff mixture of cement mortar

in the proportion of 1:2( 1 cement : 2 fine sand) including testing of

joints etc complete

19.35.1 450mm dia RCC pipes metre 10.00 1920.50 19205.00


well, ERW (Electric Resistance Welded) FE 410 mild steel screwed and

socketed/ plain ended casing pipes of required dia, conforming to IS:

4270, of reputed & approved make, including painted with outside

surface with two coats of anticorrosive paint of approved brand and


accessories, all complete, for all depths, as per direction of Engineer-in-

charge.

24.10.2 150 mm nominal size dia having minimum wall thickness 5.00 mm metre 60.00 1335.40 80124.00






Percentage in


Percentage in


Amount in

Figure

(Rupees)

Amount in

Words

(Rupees)

RITES Ltd.,


































personnel and labour required etc., Each

BW 1.00












0- 50 mtrs RMtr 50.00


RITES Ltd.,



50- 100 mtrs RMtr 50.00

100- 150 mtrs RMtr 50.00




















makes.Each 1.00





of consumables Each

BW 1.00

Total - Part C - Market Rate Items



items


RITES Ltd.,



POINT WIRING


switch.









GROUP A














a 3.5.1 15 1-3 Way Each 90 91.00 8190.00

b 3.5.2 15 4-5 Way Each 40 98.00 3920.00

c 3.5.3 15 6 Way Each 95 121.00 11495.00

d 3.5.4 15 8 Way Each 15 140.00 2100.00

e 3.5.5 16 10-12 Way Each 25 159.00 3975.00






a 3.6.1 16 1 to 3 Module Each 90 109.00 9810.00

b 3.6.2 16 4 Module Each 40 122.00 4880.00

c 3.6.3 16 6 Module Each 95 173.00 16435.00

d 3.6.4 16 8 Module Each 15 200.00 3000.00

e 3.6.6 16 12 Module Each 25 267.00 6675.00

Construction of Govt. Polytechnic College at Surpur in Yadgir District for DTE - Electrical Works


RITES Ltd.,







1293

GROUP A










Hook.

No 52 92 4784











wherever necessary




Groove Cutting














Etc as required.

a 1.8.2 3 25mm Mtr 200 26.00 5200.00

b 1.8.4 3 38mm Mtr 200 39.00 7800.00

c 1.8.5 3 50mm Mtr 200 43.00 8600.00

RITES Ltd.,








GTP of GROUP-A

a 2.5.2 6 1.5 sqmm Mtr 2950 18.60 54870.00

b 2.5.3 6 2.5 sqmm Mtr 4200 29.20 122640.00

c 2.5.4 6 4 sqmm Mtr 1900 42.10 79990.00

d 2.5.5 6 6 sqmm Mtr 1650 63.80 105270.00

e 2.5.6 6 10 sqmm Mtr 100 108.00 10800.00

DISTRIBUTION BOARDS







enclosure.

Double Door

a 6.17.7 47 4way TP&N Each 6 2399.00 14394.00

b 6.17.6 47 12 way SP & N Each 4 1622.00 6488.00







a 6.16.1 5-32 Amps SP Each 112 418 46816.00

b 6.16.3 5-32 Amps DP Each 4 849 3396.00

c 6.16.5 5-32 Amps TPN Each 6 1547 9282.00

d 6.16.6 40-63 Amps TPN Each 5 1936 9680.00




board.

a 6.18.2 47 32-40 Amps 2 pole Each 4 2623.00 10492.00

b 6.18.3 47 32-40 Amps 4 pole Each 4 2936.00 11744.00






wired Completely.

A) SP & N

a 6.43.2 b) 20 Amps Each 7 918.00 6426.00

RITES Ltd.,



SUPPLY OF FITTING









Group - A

a 4.7.1 1 X 4'-28 Watts Each 80 990.00 79200.00

b 4.7.2 2 X 4'-28 Watts Each 30 1680.00 50400.00









a 4.9.2 21 2 X 4'- 28 Watts Each 7 4028.00 28196.00




supply. Each 4 648.00 2592.00


















to IEC 61347-2-9 Safety & IEC 60923 -







RITES Ltd.,



a 4.17.2 23 150Watts Each 4 6300 25200.00






9.3.1 48" Sweep (1200mm)





a 9.2.1 78 12" Sweep (300mm) Each 10 3654.00 36540.00








FIXING CHARGES






















RITES Ltd.,












cable. Mt. 1600 23.00 36800.00



a 11.2.2 85 2 Pair mtr 525 13 6825.00





a 1.4.7 2 200 x 200 x 65 mm Each 4 157.00 628.00









7.4.10 56 3.5 core 120 sqmm Mtr 60 556.80 33408.00

7.4.4 55 4 core 16 sqmm Mtr 120 140.40 16848.00





7.8.1 61 6 sqmm to 16 sqmm Mtr 120 10.80 1296.00

7.8.3 61 95 sqmm to 150 sqmm Mtr 60 21.60 1296.00




SR KSRB I - 2, P - 7)

7.9.2 62 In soil (hard) Mtr 110 106.00 11660.00




RITES Ltd.,





(metal only)

7.14.2 62 25 mm dia Each 4 86.00 344.00

7.14.4 62 45 mm dia Each 2 200.00 400.00



sizes.

7.21.6 64 16 sqmm Each 16 11.31 180.96


EARTHING














nuts.Each 6 4317.00 25902.00




GI strip

a 7.3.1 55 25 x 3 mm Mtr 120 77.00 9240.00






Copper Wire.

b 7.22.6 64 8 SWG Mtr 80 107.70 8616.00

RITES Ltd.,







a 7.12.2 62 50mm Mtr 20 391.00 7820.00

b 7.12.5 62 100mm Mtr 15 920.00 13800.00



Amount in Figure

(Rupees)

Amount in Words

(Rupees)


above items

Percentage in

figure

(+) / (-) / At par

Percentage in

words


RITES Ltd.,




Main Power Panel

1 Main Power Panel







Incomer







Outgoing

i125 A 3P +NL - 1 No



2 Sub MV Panel







Incomer






Outgoing






works

Construction of Govt. Polytechnic College at Surpur in Yadgir District for DTE - Electrical Works


RITES Ltd.,


DIRECTOR DEPARTMENT OF TECHNICAL...

Documents

Transcript of DIRECTOR DEPARTMENT OF TECHNICAL...