Differences between our olifu bikez mini models and other models from the market

38 mm 14 mm

- Handlebar tube ends are closed with plastic caps.

- our olifu bikez minis have a steering stop which is more safety and prevents that the driver can fall over the hand-lebar while driving and steering. Most of our competitors models have no steering stop

- our steering stop system is inside the handlebar pipe and not outside. This prevents that children can clamp themselves.

- In order to ensure that the handle bar and wheel fork move in the same direction when steering a special steel bar is mounted inside the steering tube. This connects to the slotted handle bars as soon as it is plugged into the steering tube. Other competitors use here only so-called pinch points which wear off over time and can over tigh-ten.

- Thicker pipe for more stability and safety.

- Foamed tires and thick profile instead of a thin plastic covered tire.- Gentle to children´s joints and also has a much better driving experience due to the thicker material of the wheels.

50 mm

2 mm

1,8 mm

- Nice looking faces on our own developed handgrips.

Differences between our olifu bikez mini models and other models from the market

all big front wheels have two ball bearings. That supports the wheel easily turns and is quality wise more better as a normal plastic inlay. The tires therefore rotate better = better handling characteristics.

- our olifu bikez mini tricycle have in total 4 ball bearing at the front. Another 2 ball bearing support the easy and smoothly pedal for the front wheel. Those 2 added ball bearings are fixed in cast steel material.

- the pedals are made out of two parts. We chose the shape and size of the pedals sop that the children can easy drive and pedal.

- The pipe for the backwheel axis is closed and has a welded cylinder with a thread. That means the wheels can be fixed single-wise and no continuous axis is needed.

- Additionally the back wheels have also a metal bushing included which supports a smooth and easy wheel-turning and also a longer durability.

- all wheels are fixed with a hexagon bolt and with locktite instead of a simple pressed-in-nut (or rivet). That is more safety and also makes it possible to change the wheels single-wise.

- Our wheels are fixed with screws. They can be easier removed than wheels fixed with rivets. ( rivets need to be broken )- The wheel can fall off easily, if the rivet quality is bad.

- We use cast steel instead of plastic. Cast steel is more durable and less abrasive.- For screw fixing we use loctite (metal glue) and also plastic inlays. This helps us to solve the „problem“ of loosing screws.- Cast steel is more solid regarding vibration, plastic can break.

Differences between our olifu bikez mini models and other models from the market

- our olifu bikez minis have an aluminum board instead of a plastic board. The aluminum board is more stronger and durable.

- All sharp edges have a radius at our aluminum board which rises the safety issues . At the plastic board you mostly have sharp edges.

- our aluminum board is fixed with 6 rivets. This makes the board also strong enough against hits from the ground by stones etc.

- we made an metal part support below the aluminum board which gives more stability

- we chose the shape of our handlebar so that children cannot clamp their heads in. also our handlebar shape looks more modern and nice.

! Additional information !

- if you will find scratches at the handlebar while assemb- ling it please note that this is not a quality problem. each item is checked by our quality management carefully and was already one time assembled before we sent you this item. This helps us to offer you a product which has perfect quality.

- our seat is fixed with 2 screws instead of only 1 srew

- our seat is made out of two parts which offers a nice round shape and avoids injuries.

- the inside of the seat is very stable and have a special surface which makes the seat very strong and durable

Differences between the Olifu racer and the retail modell

- two wheels instead of one for less abrasion. (longer life period)- two axle arms + wheels fixed with lock nut.

- a better ball bearing with a double size casing which provides a better stability and a longer life period

- the design difference of the seats between the retail and our olifu educational model- tear-resistant and robust textil of the seat for a safety driving and longer life period.

2 mmeducational

1,4 mmretail

- wall thickness of the tube is thicker. (much stronger)

- plastic protection cap underneath the handlebar for less abrasion.

- olifu‘s ergonomic handgrip is fixed to a perfect angle for the driver- longer life lasting due to stronger material

- as an improvement and innovation in summer 2012 we will present you closed rims for more safetyness in our olifu bikez design

- back wheels have been optimized and the screws have been coated with locktite- we also have changed to a left-handed thread and stronger screws.

- two screws on the joints which screws into the plastic inlays, this gives it a better stability and longer life period.

- all screws are coated with blue locktite for a better hold

- racer is assembled with 3 screws- paintwork: powder coating with a metallic finish