Traffic congestion-insufficient road development-growing

number of vehicles.

Low speed, increased accident rates, increased fuel

consumption, and increased pollution.

Impossible to build enough new roads or to meet the

demand.

The goal of ITS is to improve the transportation system to

make it more efficient and safer by use of information,

communications and control technologies.

ITS is comprised of a number of technologies,

including information processing, communications,

& control electronics.

Joining these technologies to our transportation

system will save lives, save time, and save money

Bus

Station

PIS, POS Terminal, Station Server, Local Network, Flap Gates, etc.

On-board

Bus

PIS, Camera, Multiplexing, Box PC, Driver Display/Console

Central

Server

Station

Database Server, Communication Infrastructure, Tracking Terminals, Video Walls, etc.

Core

Application

Automated Fare Collection (AFCS), Automated Vehicle Location (AVLS), PIS, Scheduling and Dispatch System, etc.

CAN Switch Module

Transmission ECU

Vehicle Box PC with 10.1”Touch Screen Driver Console Processor: Intel 3rd Generation Core i5/i7 System Memory: 2 x SODIMM, Max 32GB DDR3 Interfaces: WLAN, 2 x Ethernet, 6 x USB, 1 x CAN 2.0B, 2 x RS232, 1 x RS485/422/232, 1 x VGA, 2 x PS/2 , 1 x Line in/Line out/Mic in, 1 x Composite Connector for 4 CCTV camera inputs.

Ticketing Machine

Smart Card Reader

Destination Displays

Driver Info Display, Route Guidance/ Navigation – Connected to Box PV via VGA: 10.1" LED LCD with Cap. Touch Resolution: 1024 x 600

Passenger Info Displays within BUS Slave Display

RS485

USB

DVR – Video Recorder

WLAN

USB

Public Announcement System

I/O – MUX Front

I/O – Mux Rear

RS-485 Proprietary

Engine ECU

CAN 2.0B (SAE J 1939)

ABS ECU

RS485

CAT 5 Cable

Typical Architecture of Intelligent Bus

System Server

Financial Institutes

VDR / CAN Gateway

GPS – GPRS/3G/ CDMA

WLAN

GPRS

VGA Power

Box PC

Driver display

Bus

Camera

RFID Payment

GPS Receiver

Smart Card Reader

Passenger Information System

H.264/HD/VGA

Comm Port

RS485/232

USB USB

On-Board Vehicle ITS Components

ITS Compatible Bus Box PC with 10.1” Driver Console

CONTROLLER BOX PC

System Specifications:

Processor: Intel 3rd Generation Core i7/i5 processor

System Memory: 2 x SODIMM, Max 32GB DDR3 1333/1600

Input / Output Connectors:

1 x CAN 2.0B (J1939)

2 x RJ-45(10/100/1000 Μpbs)

2 x RS-232 Conn

1 x RS-232/422/485 Conn

1 x RS-232 (Optional)

1 x VGA Conn

4 x USB 3.0

2 x PS/2

1 x Line in/Line out/Mic in

2 x USB 2.0

1 x CAT-5 Conn for Slave Display (Digital Signage/PIS)

1 Composite Conn - 4 CCTV Camera Inputs

1 x Power/HDD LED

1 x Reset / Power on Button

Communication Ports:

3G SIM card slot; GPS; Wi-Fi

Driver Display/Console Specifications:

Viewable Size Image: 10.1"(16:9)

Display Resolution (pixel): 1024(H)x600(V)

Contrast Ratio: 500:1 (typ.)

Brightness: 200 cd/m2 (typ.)

Power Consumption: 10 W typical, normal operation

Touch Screen: Projective Capacitive Touch(USB)

Merits of ITS

Improved safety

Better traffic flow

Lower travel cost

Better environmental quality

Increased business activity

Greater user acceptance

Better travel information

Better planning information

Best possible medium to reach your target customers on the

bus.

Passengers on – board bus can sometimes feel bored and

want to catch some information.

Advertising or even location based information can be shown

by bus signage can develop an interest for passengers easily.

Effective signages where media content can be readily

updated interests not only the passengers but also can attract

potential revenue generation model for fleet operators.

GPS Trigger Content – Location based information update

Content Update – 3G/Wi-Fi(802.11b/g)/USB Flash Drive

Sunlight Readable – Trans-reflective/Panel Enhancement

Anti Vandal – Protection Glass

Anti Vibration & Shock

Voltage Input Protection with CPM Box

Controlling your fleet’s content centrally at any time through

Powerful management software “MSO Gold”

Wide voltage input (9-36VDC) design protects your digital

signage equipment

Flexibility with regard to content up gradation by either

3G/Wi-Fi/USB or GPS based triggering.

Built – in Network Player (HD – image processor)

Pole mounting options makes it easy for installation

Provides huge potential for new business opportunities for

advertisers to attract passenger’s attention

CPM Box

Features:

Protect Battery from deep discharge

Protect LCD and Player from over/under

Temperature

Protect wiring with Fuse for short circuits

Wake-Up function for over night conditions.

Minimized standby current

Master Display – 21.5”

Network Player – built in & Combo

Antenna (3G/GPS/Wi-Fi)

Features:

Active Display Area - 476.64mm(H) x 268.11mm(V)

Number of Pixels - 1920 x 1080

Contrast Ratio - 3000:1(typ.)

Display Color - 16.7M(8bit/color)

Brightness(cd/m2) – 300

Storage – 4GB CF Card – Expandable Option

Content Update – 3G/Ethernet/Wi-Fi/USB

Video Format Support – MPEG1,2,4, Divx, WMV,

AVI

Graphic Format Support – JPEG,BMP,PNG

Text Banner – Variable scrolling speed & position,

Static HTML, RSS Feed, GPS Trigger Content

Slave Display – 21.5”

Features:

Active Display Area - 476.64mm(H) x

268.11mm(V)

Number of Pixels - 1920 x 1080

Contrast Ratio - 3000:1(typ.)

Display Color - 16.7M(8bit/color)

Brightness(cd/m2) – 300

Optional VGA/Audio Input – Cat5 Receiver

Optional Video Input – S-Video, Composite

Network Media player with Video Input facility.

Network media player supports GPS location based content playing

( Image/Video/Audio).

Supports RSS feed with local player cache.

Supports Streaming over 3G network.

DVI-I/VGA/S-Video/CVBS video outputs

Supports standard media formats (JPG, WMV,MPEG, MOV, RSS.)

Overlapping text, scroll for emergency alert..

Automatic Weather information, currency & market updates.

Flexible screen layout with multiple zones for video, image, TV,

ticker…

Centralized content management and distribution.

THANK YOU!