DETAILS€¦ · Acoustical and Drywall Suspension Systems • Integrates drapery pockets, window...

DETAILS

Make the Difference

Armstrong® Ceiling Solutions are pre-engineered with attention to detail to ensure you control the finished aesthetic of the ceiling and achieve your design intent.

On every project you will encounter some, if not all, of these common conditions. This guide features pre-engineered integrated solutions offered by Armstrong Ceilings for each common condition.

We have compared our pre-engineered solutions to traditional construction methods, and presented the benefits to the design and build out process. By using these integrated solutions, you will be able to specify and maintain the crisp, clean details you envision, while solving everyday challenges for your installers.

WINDOW & SHADE POCKETS

4SOFFITS

14LIGHT COVES

11TRANSITIONS

6

Improve finished aesthetics with

PRE-ENGINEERED Solutions

CORRIDORS CLOUDS, LIGHTING & ACCESSORIES

23 25FLAT & CURVED DRYWALL

19INTERIOR GLASS PARTITIONS

21

DETAILS– make the –

DIFFERENCE

For more information, call 877 276-7876

YOU INSPIRE™

SOLUTIONS CENTER

31

4 WINDOW & SHADE POCKETS

Axiom® Building Perimeter Shade Pocket


Axiom® Building Perimeter Shade PocketsWhen it comes to shade pockets for the perimeter of an application, trying to accomplish the transition between the interior of a building’s perimeter and the ceiling plane can be challenging.

Roller Shade

Blocking

5/8" Gypsum Board, corner beads, spackle 3 coats, and paint

Angle Molding

Stud andTrack

Stud and Track

ExposedTee Grid

3-Sided Lutron® Perimeter Pocket AXP355L

3" Perimeter - Closure Clip AXPCC3L

AcousticalMain Beam

AXTBC

AXTBC

3-Sided Perimeter Pocket

Main BeamSpline

Diffuser FacePlate

3 Sided Perimeter Pocket – AXP355

Main Beam

AXTBCGasket – AXPFG

1.1.A. Axiom Building Perimeter Pocket

Axiom® Closure ClipAXPCC3

Axiom® DrywallBottom Trim

AXBTSTR

5/8" Gypsum Board

AXP3553-sided Pocket

AXTBC

Traditional Acoustical Grid

5 WINDOW & SHADE POCKETS For more information, call 877 276-7876

Axiom® Building Perimeter Shade PocketsArmstrong Ceiling Solutions

Armstrong® Ceiling Solutions

BENEFITS:

• Regain aesthetic control at the building perimeter

• Achieve quality control at the perimeter, reduce time required to detail and specify the integration of perimeter solutions

• Reduce risk associated with field fabricated, labor-intensive accommodation of linear air distribution, window pockets, and ceiling elevation changes at the perimeter of a building

FEATURES:

• Integrates with all Armstrong Acoustical and Drywall Suspension Systems

• Integrates drapery pockets, window shades, air distribution, and changes in ceiling elevation

• Installs 12 times faster than drywall pockets and twice as fast as traditional pockets

• Variety of options for manual, motorized, and pocketless applications at the perimeter

View Master Details >

https://www.armstrongceilings.com/commercial/en-us/technical-downloads/file-downloads.html?solution=Common+Conditions

6 TRANSITIONS

Axiom® Transitions – Acoustical-to-Drywall Elevation Change


Flush TransitionTransition between two ceilings planes at the same height.

Traditional Flush Transition

Armstrong Ceiling Solutions Flush Transitions

7 TRANSITIONS For more information, call 877 276-7876

5/8" Gypsum Board

Acoustical Grid

Studs and Track

5/8" Gypsum Board

Corner Beads, spackle 3 coats, and paint

Acoustical Panel WallMolding

5/8" Gypsum Board

Acoustical Grid

Acoustical Panel

Drywall GridKAM - 12

Hanger Wire to Structure

9/16" Tegular Transition Molding

Wall MoldingCorner Bead 3 coats of mud and paint

Steel Transition

Steel Transition

Acoustical Grid

Acoustical Panel

AXTBCAXTBC

Drywall Grid

5/8" Gypsum Board

15/16" Flush Act to Drywall Transition – AXTR7904

Axiom®

Transition


• Minimize trade coordination with 40% faster installation time

• Can eliminate stud framing to structure

STEEL BENEFITS:

• Steel transitions are factory painted to match Armstrong® Acoustical Suspension Systems

• Fewer parts and pieces; integrates Acoustical Molding with a Drywall Taping Flange

• Eliminates a vertical drywall return at the transition

AXIOM® BENEFITS:

• Axiom aluminum trim provides more crisp edge detailing compared to conventional roll-formed steel systems

• Axiom acoustical-to-drywall transitions are available straight and curved for perfect fit and finish every time

• Axiom is part of the Sustain™ portfolio and meets the most stringent sustainability compliance standards today

FEATURES:

• Accommodates acoustical-to- acoustical, acoustical-to-drywall, and drywall-to-drywall

• Axiom can be straight or curved

• Compatible with Armstrong® Suspension Systems and Drywall Grid Systems



Field TransitionUsed in place of a bulkhead when you are transitioning between two ceiling systems or changing ceiling system direction.

Traditional Field Transition

Stud and Track

Wall Molding

Acoustical Grid

Wall Molding

Acoustical Grid

Stud and Track

Weak Point

Angle Molding


4"

AXTBC

AcousticalCeiling Panel

AXTBC

AcousticalCeiling Panel

AXFFP4

Acoustical Grid

Acoustical Panel

AXTBC Acoustical Grid

Acoustical Panel

AXTBC

AX15DSCSTR

1 1/2"

Armstrong Ceiling Solutions Field Transition


BENEFITS:

• Improved aesthetics

• Axiom® aluminum trim provides more crisp edge detailing compared to traditional stud framing bulkhead



FEATURES:

• Transition from acoustical to acoustical without dropping a stud

• Available in 1-1/2", 4", or 6" (1-1/2" used to change direction in hallways/corridors)

• Used to transition between intersecting ceiling systems or to transition between two different types of ceilings

• Acoustical-to-acoustical transitions only



Straight or Curved Transitions (1" to 10" Elevation Change)Axiom® Transitions are used in place of a bulkhead when there is a height transition less than 10".

Stud and Track

Angle Molding

Acoustical Grid

Angle Molding

Acoustical Grid

Acoustical-to-Acoustical

Acoustical-to-Drywall

Traditional Transition (Elevation Change)

9 TRANSITIONS


1"

Acoustical Grid

Acoustical Panel

AXTBC

AXTBCDrywall Grid

5/8" Gypsum Board

1" Axiom® Transition – AXTR7910

4" Axiom Transition Trim – AXTR4STR

AXCCLT

Acoustical Main Beam

Acoustical Panel

AXCCLT

AcousticalMain Beam

AcousticalPanel

4"

Armstrong Ceiling Solutions Straight or Curved Transitions (1" to 10" Elevation Change)


BENEFITS:

• Improved visual with up to 40% savings of installation time

• Axiom® Transitions create a smooth transition between drywall and suspended ceilings (mineral fiber, metal, or wood)

• Axiom aluminum trim provides more crisp edge detailing compared to traditional stud and drywall framing


• Axiom Acoustical-to-Drywall Transitions are available straight and curved for perfect fit and finish every time

FEATURES:

• Axiom® Vector® is available straight only for use with full size Vector panels (field cutting Vector panels can be avoided)

• Elevation change accommodates acoustical-to-acoustical, acoustical to-drywall, and drywall-to-drywall height transitions of 1", 2", 4", 6", 8", and 10"




F-Molding Transitions

Metal Stud And GypsumBoard Vertical Transition

Grid System

Grid System

Traditional Upturn Transition


5/8" Gypsum Board

1 1/4" Drywall Screw

7906 F Molding(Tape, sand, mud, and paint)

Acoustical Grid

Acoustical Panel

Attach Grid via XTAC or Pop Rivet

3"

Drywall Grid

7906Steel Transition

AXTR7906CURAxiom Transition

Armstrong Ceiling Solutions F-Molding Transitions Greater Than 10"


F-Molding Transitions are used to create drywall height transitions without stud and track framing eliminating the unsightly visual of stud and track framing.

• Minimize trade coordination with 40% faster installation time

AXIOM® BENEFITS:• Axiom aluminum trim provides

more crisp edge detailing compared to traditional stud and drywall framing



• Axiom curved F-Molding

STEEL BENEFITS:• Steel transitions are factory

painted to match Armstrong® Acoustical Suspension Systems

• Roll formed steel with integrated mud flange – saving time, material, and labor on vertical transitions

• Fewer parts and pieces; integrates Acoustical Molding with a Drywall Taping Flange

• Eliminates a vertical drywall return at the transition

FEATURES:• Accommodates acoustical-to-

acoustical, acoustical-to-drywall, drywall-to-drywall, and drywall-to-acoustical




Axiom® Direct and Indirect Light Coves

11 LIGHT COVES For more information, call 877 276-7876

Axiom® Direct Light Coves Axiom® extruded aluminum direct light coves offer ultra-low plenum clearance, predictable lighting performance, and perfect integration with all Armstrong® Suspension Systems.

Finished Wall

4-1/2"

1-5/8"Fixture by

Others

4" or 6"drop

5/8" Gypsum BoardAxiom® Drywall

Bottom TrimAXBTSTR

Hold Down ClipAX-SPT-HDC

Drywall Grid

AX2HGC


Wall Attachment ClipAXPWCCP2

AXDLC444" x 4" Cove

AXTBC

Stud and Track

Blocking 5/8" GypsumBoard

Recessed Light

Traditional Direct Light Cove


Armstrong Ceiling Solutions Axiom® Direct Light Coves


BENEFITS:

• Fully concealed integrated design installs with all Armstrong® Acoustical and Drywall Suspension Systems

• Low profile design with plug and play lighting for shallow plenum corridors or entryways

• Integrated lighting partners make the complete solution easy to specify and maintain lighting symmetry

FEATURES:

• Pre-engineered, extruded aluminum light cove profiles with integrated light fixture

• 4" x 4" and 4" x 6" Direct Light Cove options available

• Install 90% faster with just 10% of the labor of traditional light coves

• Designed to work with Armstrong linear lighting partners, Axis Lighting, and XAL



Axiom® Indirect Light Coves & Indirect Field Light CovesThis solution offers a variety of options with both Ceiling-to-Wall and Ceiling-to-Ceiling light coves and sizes, while allowing for predictable lighting performance and perfect integration with all Armstrong® Suspension Systems.

Stud And Track

Stud And Track

Stud And TrackLight Fixture

Blocking

3/4" Plywood

5/8" Gypsum Board

Hanger Wireto Structure

Prelude Main Beam

Acoustical Lay-In Panel AXTBC

Axiom Indirect Light CoveCeiling to Ceiling Knife-Edge

(AXIDLCCKE812 Shown)

45° Tee BarConnector Twist

Acoustical Lay-In Panel


Prelude Main Beam

AXTBC

Armstrong DrywallGrid System

5/8" Drywall

Axiom IndirectField Light Cove

Ceiling to WallClassic Edge(AXIFLCW4)


ArmstrongDrywall GridSystem

KAM (Optional)for Easier Leveling

of Axiom


5/8" Drywall

KAMKAM

Wall

Axiom Bottom Trim

Ceiling-to-Wall Indirect Field Light Cove Classic

Ceiling-to-Ceiling Indirect Light Cove Knife Edge, Slotted

Traditional Indirect Light Cove


Armstrong Ceiling Solutions Axiom Indirect Light Coves & Indirect Field Light Coves


BENEFITS:

• Offer predictable lighting performance and perfect integration with all Armstrong Suspension Systems

• Integrated lighting partners make the complete solution easy to specify and maintain lighting symmetry

FEATURES:

• Variety of options with both Ceiling-to-Wall and Ceiling-to-Ceiling light coves and sizes

• New Knife Edge® profile brings acoustical tile out to the edge of the cove

• Install 90% faster with just 10% of the labor of traditional light coves



14 SOFFITS

Drywall Grid System and QuikStix™ Soffits


Drywall Grid System – 90° SoffitsFaster, easier, and better way to frame drywall soffits; designed to significantly reduce time and labor associated with cutting and measuring, while removing guesswork and maintaining design intent.

Traditional 90° Soffit

15 SOFFITS For more information, call 877 276-7876

Armstrong Ceiling Solutions 90° Soffit (QuikStix™ or Drywall Grid System)

KAM-12KAM-12

Wall Molding

KAM-12Hanger Wireto Structure

Brace asrequired Screw

Attached

Drywall Cross TeeXL8945

DW90C

DrywallMain BeamHD8906

LAM -12 KAM -12 or LAM -12

5/8" Gypsum Board

Quickstix(Shown QS610) Wall Molding

Acoustical Grid with Acoustical Panel

Spans greater than 4'require the use of a

Hanger Wire

If vertical rise exceeds 4' bracing required

LAM -12

Brace as Required


BENEFITS:

• Installation savings up to 75% compared to traditional framing

• Pre-engineered drywall grid soffits are three times faster to install than traditional stud and track framing

• Armstrong® Drywall Grid saves steel and significantly increases the modul capabilities of the installation

FEATURES:

• QuikStix™ Soffit Drywall Framing System guarantees a perfectly crafted 15°, 30°, 45°, 60°, or 90° angle every time

• Engineered to give you design control, while providing a green installation by reducing steel up to 15%

• Can be quickly field-modified to accommodate a vast array of soffit and step conditions



Stud

Drywall Grid System – Step Soffits Faster, easier, and better way to frame drywall soffits; designed to significantly reduce time and labor associated with cutting and measuring, while removing guesswork and maintaining design intent.

Traditional Step Soffit


Armstrong Ceiling Solutions Step Soffit

48" O.C. Bent HD8906 Drywall Main Beam

KAM -12

KAM -12

XL8945 Cross Tee16" O.C.

Hanger Wire to structureKAM -12

DW90C

DW90C

KAM -12

KAM -12 KAM -12

DW90C

DW90C

DW90C

KAM -12


BENEFITS:



• Armstrong® Drywall Grid saves steel and significantly increases the modularization of the build process

FEATURES:

• Forms perfect 30°, 45°, 60°, 75°, and 90° angles

• Flattened bulb is offset to allow true angles without interference





Drywall Grid System – Drywall Grid Light CoveTraditional track and stud drywall light coves leave many finishing decisions to be handled on-site, making it hard to assure the controls are in place to maintain design intent and lighting symmetry. Stud 16" O.C.

to Structure

Traditional Drywall Light Cove


Armstrong Ceiling Solutions Drywall Grid Light Cove

#12 HangerWire

KAM-12Gypsum Board

5/8" Gypsum Board

Armstrong Drywall Grid System

Varies

DW90CGCrush

Bulb toApply

5/8" Gypsum Board

KAM-12

KAM-12

Gypsum Board

Armstrong Drywall Grid System

Light Fixture by Others

DW90C


BENEFITS:




FEATURES:

• Drywall grid is manufactured with additional rout locations to accommodate F-Type light fixtures, access panels, and air diffusers.





Stud

Drywall Grid System – Soffit Framing A faster, easier, and better way to frame drywall bulkheads; designed to significantly reduce time and labor associated with cutting and measuring, while removing guesswork and maintaining design intent.

Traditional Soffit



DW90E

Drywall Cross Tee

Drywall Main BeamHD8906

DW90C

Exposed TeeMain Beam

Acoustical Panel

AngleMolding KAM 12

DrywallCross Tee

XL89655/8"Gypsum Board

StrongBack™

DrywallMain BeamHD8906

KAM 12

Armstrong Ceiling Solutions Soffit


BENEFITS:




FEATURES:

• Forms perfect 30°, 45°, 60°, 75°, and 90° angles

• Flattened bulb is offset to allow true angles without interference

• Engineered to give you design control

• Provides a green installation by reducing steel up to 15%




19 FLAT & CURVED DRYWALL

Curved Drywall Grid System with RC2 Clips


Drywall Grid System – Flat and Curved Drywall CeilingsSave time and reduce material and labor costs compared to traditional installation methods. Our Drywall Grid Systems are engineered to get contractors on and off the job faster, reducing the construction schedule.

Channel

Track

Main Beam

Cross Tee

Hanger Wire

Armstrong Drywall Grid System Traditional framing systemTraditional Flat Drywall

20 FLAT & CURVED DRYWALL For more information, call 877 276-7876

Armstrong Ceiling Solutions Drywall Grid System for Flat and Curved Drywall

Hanger Wire

Drywall Cross TeeXL8945 Drywall

Main Beam HD8906

Drywall Cross Tee XL8945P

RC2 Clip

Drywall Main BeamHD8906F08


BENEFITS:


• Ultimate control of the curve – expand your design beyond traditional pre-selected or pre-determined radii

• Simplify the design of corridors, small room configurations, restrooms, and storage closets

• Engineered to use less steel than traditional drywall ceiling framing methods

FEATURES:

• Create custom radii to suit any design by combining our pre-notched main beam with our RC2 clip




21 INTERIOR GLASS PARTITIONS

Axiom® Glazing Channel


Axiom® Glazing Channel Creating the illusion of glass that appears to pass through the ceiling plane is difficult without the proper integrated solutions at your fingertips.

Stud Bracing

Stud

Blocking

Blocking BlockingStud and Track

Studand Track

Stud

Blocking

Stud Bracing

BlockingStud and TrackBlocking

Studand Track

Stud and Track

Studand Track

Traditional Glass Partition

22 INTERIOR GLASS PARTITIONS For more information, call 877 276-7876

Acoustical GridAXCCLT

Glass


Axiom Glazing Channel – AXGCfor Acoustical Gasket

by Glazing Contractor

DrywallMain Beam

HD8906

Hanger Wireto structure

4' O.C.

Screw Attachment

Brace 4' O.C. or as Required


Glass


Axiom Glazing Channel – AXGCfor acoustical

Gasket by Glazing Contractor

Axiom® Glazing Channel Armstrong Ceiling Solutions


BENEFITS:

• Integration with all Armstrong Acoustical and Drywall Ceiling Systems for a clean installed visual so glass seems to “disappear” into the plenum

• Coordinated fit and finish ensures delivery of design intent

• Completely concealed integration without the need for a drywall bulkhead

FEATURES:

• Compatible with all Armstrong heavy-duty suspension main beams using StrongBack™ Support Hangers

• Five trim profile options to coordinate Lay-in, Tegular, and Vector® ceiling panels and Drywall Grid Systems

• Recessed profiles – use with 3/8" and 1/2" thick interior glass partition walls

• Seismic solution for category D, E, F installations



23 CORRIDORS

SingleSpan™ Acoustical Corridor System with Calla® Ceiling Panels


SingleSpan™ Acoustical Corridor Suspension System and ShortSpan® Drywall Grid Framing SystemCrowded or low plenums are always a challenge when designing due to many important components running above the ceiling plane especially within healthcare applications.

Hanger Wireto Structure72" Max from Wall

2' Cross Tee

Cross TeeAdapter Clips

(XTAC)

StructuralWall Angle(SWA9878)

4' Cross Tee24" O.C.Cross Tee

Adapter Clips(XTAC)

SingleSpanPrelude Main Beam

48" O.C.

StructuralWall Angle(SWA9878)

Attach XTAC CrossTee Adapter Clip

with 1/8" Steel Rivets

SingleSpanMain Beam

Screw Attach Structural Wall Angle SWA9878 to Structure

Every 16" or 24" On Center

PeakForm®

Bulb

StrongBack™ SB-12

24 CORRIDORS For more information, call 877 276-7876

Wall

5/8" Gypsum Board

Drywall Shortspan16" O.C.

LAM-12

LAM-12

Wall8'-6"

Armstrong Ceiling Solutions SingleSpan Acoustical Corridor Suspension System

Armstrong Ceiling Solutions ShortSpan Drywall Grid Framing System


BENEFITS:

• SingleSpan reduces or eliminates hanger wires – perfect for healthcare/education spaces with crowded plenums

• SingleSpan provides improved access to utilities in the plenum post installation

• ShortSpan supports spans up to 8'-6" with no mid-span support

FEATURES:

• SingleSpan structural wall angle maximizes the load carrying performance

• SingleSpan and ShortSpan have been seismically tested, IAPMO and ICC-ES code compliant

• ShortSpan StrongBack™ SB12 can be used for spans beyond 8'-6"

• Locking Angle Molding – LAM12 has pre-engineered locking tabs punched 8" on center – frame 16' or 24" on center



25 CLOUDS, LIGHTING & ACCESSORIES

Formations™ Acoustical Cloud Kits


Corner Splice Clips

AXTBC

AXTBC2' Cross Tee

4' Cross Tee

4' Cross Tee

4' Cross Tee

4' Cross Tee

2' Cross Tee

2'Cross

Tee

4' Cross Tee

AXTBC

AXTBC

Main Beam

Main Beam

4" Cross Tee

4" Axiom ClassicPerimeter Trim

4" Axiom ClassicPerimeter Trim

2' Cross Tee

Main Beam

AXCCLT

AXCCLT

Splice onPerimeter Trim

StrongBack

StrongBack

Corner Splice Clips

Gripple and Air Craft Cable

Formations™ Acoustical Cloud KitsMake a bold statement in signature areas without the hassle, cost, and risk associated with custom installations. Whether you choose standard or custom, the grid, trim, and hanging components come pre-cut and ready to go in a kit.

Traditional Stick-Built Cloud

For more information, call 877 276-787626 CLOUDS, LIGHTING & ACCESSORIES

Corner Splice Clips

4" Axiom® ClassicPerimeter Trim

Splice onPerimeter

Trim

AXCCLT

AXCCLT


2' CrossTee

SupportHanger

Gripple and Air Craft Cable

SupportHanger

Armstrong Ceiling Solutions Formations™ Acoustical Cloud Kits


BENEFITS:

• Ideal for exposed structure areas to reduce reverberation time, reduce noise levels, and increase speech intelligibility

• Clouds appear to float and provide a clean, contemporary look with consistent fit and finish

• Kits install 55% faster than stick built clouds – no field painting or modifications

FEATURES:

• Variety of options – including configurations, panels, sizes, trim color, lighting, and applications

• Kits come complete with our proven Support Hanger carrying channel, which eliminates 40% of the cables – minimizing visible wires

• Wide range of standard Axiom® trim and suspension system colors adds a custom look



Linear LightingDeliver your vision of perfectly symmetrical continuous or discontinuous linear lighting, using factory-finished acoustical ceiling panels and suspension systems or our Drywall Grid System.

Supra�ne / Interlude Main Beam

TZYK Yoke

Hanger Wires to Structure

TZYK Yoke

Light FixtureOptima Field4' x 4' Panel

Supra�ne / Interlude 4' Cross Tee 4' apart for Panels

6" x 4' Techzone Metal orOptima Technical Panel

6" x 4' Linear Diffuser

Flexible Sprinkler

6" x 4' Techzone Metal orOptima Technical Panel

Optima Field4' x 4' Panel

TZYK Yoke

Traditional Linear Lighting

27 CLOUDS, LIGHTING & ACCESSORIES For more information, call 877 276-7876

Armstrong Ceiling Solutions On-Center Linear Lighting – Acoustical

Cross Tee

Main Beam

Light Fixture by Others

LCB4 – 4" Lighting Connector Bracket

Hanger Wire

Pop Rivet


Silhouette Main Beam

1' Silhouette Grid Adapter

1' Silhouette Cross Tee

Lighting Connector Bracket

STAC

1"

5 5/16"

3 5/8"

1 15/16"

1' SilhouetteGrid Adapter

SilhouetteMain Beam

SilhouetteMain Beam

1' Silhouette Grid Adapter

STAC

STAC

Armstrong Ceiling Solutions Linear Lighting – Drywall

5 1/8" DGSOpening

#8-32 x 5/16" Pan Head Machine Screw

#8 x 3/4" Truss Head Self-tapping Screw (Screw through Extrusion into Grid 16" O.C.)

#7 x 7/16" Sharp Point Framers Screw

DGSL Aluminum Extrusion

DGS Cross Tee

LCBDGS4 ConnectorBracket Install 2' from

Each End 4" O.C.

Hanger Wire

DGS Main Beam

Light Fixture

BILL OF MATERIALSITEM ITEM NUMBER DESCRIPTION DWG NUMBER REV. QTY. NOTES

1 DGSLL24 ALUMINUM EXTRUSION P34061 D 2 PAINTED WHITE2 LCBDGS4 CONNECTOR BRACKET P34139 - 1 NOT PAINTED3 LLTKEP END PLATE P34118 - 2 PAINTED WHITE4 MSC - 67413849 PHTS - #8-32 DIA. x 5/16" LG. 25 WAVE - AXSCREW PHTS - #6-20 DIA. x 5/8" LG. 8

3

Assemble Bracket as seen –Bracket can be installed from above or below by rotating 90° into position

3.458

1

4

25

(2X) Screw Bracket to Extrusion w/PHTS –#8-32 DIA. x 15/16" LG. as seen

(4X) Drill thru & C’sink w/#14 Center Drill from bottom

Assembled Front View Scale 1:1

6 3/4"

1 1/4"

3 1/16"4"BENEFITS:

• Pre-engineered to seamlessly integrate linear lighting on-center with the grid line

• Factory finished panels and suspension system

• Zero independent suspension for lighting fixtures

• Perfectly place runs of light, create ceiling layouts to fit your building design

FEATURES:

• Seamless integration between drywall ceilings and linear lighting

• Leverage long runs of light to create a monolithic look

• Varying lengths and on-center spacing true to design intent



Formations™ Drywall Grid Cloud KitsPre-engineered drywall cloud kits are 50% faster to install than traditional track and channel drywall clouds and maintain a consistent fit and finish.

Traditional Stud & Track Drywall Cloud

28 CLOUDS, LIGHTING & ACCESSORIES

3-5/8" Track

3-5/8" Stud

3-5/8"20 GA Track

3-5/8" Stud

5/8" Gypsum Board

Corner Beadmud, sand and paint

4'

8'


Axiom® One Pieceavailable in

2", 4", and 6"

AXDWT8DFDrywall Clip

(TYP)

AXCCLTPerimeter Trim

Clip (TYP)

XL8926 DrywallCross Tee


4'- 9/16"

8'- 9/16"

HD8906 Main Beam (TYP)

AxspliceSplice Plate (TYP)




Hanger Wire Location (TYP)


Armstrong Ceiling Solutions Formations Drywall Grid Cloud Kits


Hanger wire to structure

Drywall Grid System

5/8" Gypsum Board

4" One Piece Drywall Trim

AXTBC4" One Piece Axiom® for Drywall

BENEFITS:

• Improved floating visual compared to field constructed track and channeled clouds

• Clouds appear to float and provide a clean, contemporary look with consistent fit and finish

• Kits install 50% faster than traditional track and channel drywall clouds

FEATURES:

• Pre-cut suspension system components, perimeter trim, and easy-to-adjust aircraft hanging cables make assembly and installation fast and easy

• Perimeter trim integrates with 5/8" thick drywall (not included in kit)

• Improved floating visual compared to traditional stud framed drywall clouds



Seismic Wall Molding Connection (BERC2)Traditionally unsightly 2" wall angle has been used to facilitate movement, while using pop rivets for finishing.

Unattached Wall

Attached Wall

Una

ttac

hed

Wal

l

Hanger Wire

Stabalizer BarUnattachedWall

AttachedWall

2'O.C.

2"

3/4"

2"

Attached Side

Shadow Molding

BERC27897

Prelude Main Beam

Cut OptimaVector Panel

Unattached Side

Shadow Molding

BERC27897

Prelude®

Main Beam

Cut Optima®

Vector® Panel

7897 Shadow Molding

3/4"

1/2"

1/2"

15/16"

15/16"

3/4"

Attached Side

Shadow Molding

BERC27897

Prelude Main Beam


Unattached Side

Shadow Molding

BERC27897

Prelude®

Main Beam

Cut Optima®

Vector® Panel

7897 Shadow Molding

3/4"

1/2"

1/2"

15/16"

15/16"

3/4"

7/8"3/8"

7/8"

Tight screw

B

B

B

B

B

B

B

B

X

X

X

X

X

X

X

X

3/8" Clearance Wall

Tight Wall

Tigh

t Wal

l

2' O.C.

Cross Tee

Cross Tee

Main Beam

Main Beam

B B B

B B B

7/8"

Tight screw

3/8"7/8"

Tight Wall

Clearance Wall

Tight Wall

X Hanger WireB BERC or BERC2 Clip

BERC2

BERC2

BERC

BERC

Attached Side

Wall Molding

BERC27897

Acoustical Grid


Unattached Side

Wall Molding

BERC27897

Acoustical Grid

Cut Optima®

Vector® Panel

7897 Shadow Molding

3/4"

1/2"

1/2"

15/16"

15/16"

3/4"

Attached Side

Wall Molding

BERC27897

Acoustical Grid


Unattached Side

Wall Molding

BERC27897

Acoustical Grid

Cut Optima®

Vector® Panel

7897 Shadow Molding

3/4"

1/2"

1/2"

15/16"

15/16"

3/4"

Unattached Side

Attached Side

Traditional Seismic Wall Molding Connection


Armstrong Ceiling Solutions Seismic Wall Molding Connection (BERC2)


BENEFITS:

• Create a code compliant seismic D, E, F ceiling installation, while eliminating the need to use 2" wall molding

• No visible pop rivets required on fixed walls

• No perimeter stabilizer bars required

FEATURES:

• 7/8" wall angle instead of 2" wall angle

• No uneven appearance with 7/8" wall angle

• Code approved with ESR reports



Wall Molding – GCWA and STAC ClipAttaching main beams and cross tees to wall molding can create unsightly finished visuals at the perimeter and does not lock with grid causing shifts to happen after installation.

Traditional Wall Molding Connection


Armstrong Ceiling Solutions Wall Molding – GCWA and STAC Clip

Cross Tee

Pop-rivet Insertsfrom Cross Tee Side

Main Beam

Stac Clip

CrossTee

MainBeams

STACClip

Cross Tee

Pop-rivet Insertsfrom Cross Tee Side

Main Beam

Stac Clip

GCWA

Wall Molding


GCWA


STAC

GCWA BENEFITS:

• Join any main beam or cross tee to a wall molding via integral locking barbs without any visible pop rivets or screws

• Eliminate visible fastening at wall molding for improved visual

• Integrates with suspension system – eliminating guesswork

STAC BENEFITS:

• Create strong, code compliant, non-seismic and seismic C, D, E, F off-module main beam to cross tee connections

• Perfectly square installation

• Consistent fit and finish at connection points of layout

GCWA FEATURES:

• Clips are made and ready to use through our FastShip™ clips and accessories program

• Securely attaches mains and tees to perimeter

• Compatible with 15/16" and 9/16" Acoustical Suspension System

STAC FEATURES:

• Off module tees are tight and grid installation is square at each connection

• Use STAC everywhere you do not have an opposing cross tee connection

• Meets seismic code



31 YOU INSPIRE™ SOLUTIONS CENTER

YOU INSPIRE ™ Solutions CenterBring your one-of-a-kind ideas to life... from initial design, to product selection, integration with installation and accessories, customization, and specification to achieve the best possible finished installation. Ideal for architects who require unique solutions for ceilings, exposed structures, and wall applications.

Call us at 800 988-2585

email: [email protected] armstrongceilings.com/youinspire

For more information, call 877 276-7876For more information, call 877 276-7876

TAKE THE NEXT

STEP

armstrongceilings.com/commonconditions

BPCS-5308-1118

SketchUp® is a registered trademark of Trimble, Inc.; Revit® is a registered trademark of Autodesk, Inc. Inspiring Great Spaces® is a registered trademark of AFI Licensing LLC All other trademarks used herein are the property of AWI Licensing LLC and/or its affiliates © 2018 AWI Licensing LLC • Printed in the United States of America

877 276-7876

Customer Service Representatives

7:45 a.m. to 5:00 p.m. EST

Monday through Friday

TechLine – Technical information, detail drawings,

CAD design assistance, installation information,

other technical services – 8:00 a.m. to 5:30 p.m. EST,

Monday through Friday. FAX 800 572-8324

or email: [email protected]

armstrongceilings.com/commercial

Latest product news

Standard and custom product information

Online catalog

CAD, Revit®, SketchUp® files

A Ceiling for Every Space® Visual Selection Tool

Product literature and samples – express service

or regular delivery

Contacts – reps, where to buy, who will install

YOU INSPIRE™ SOLUTIONS CENTER

800 988-2585 email: [email protected] armstrongceilings.com/youinspire

Design Assistance

Collaborative design

Detail drawings

Specifications

Planning and budgeting

Pre-construction Assistance

Layout drawings for standard

and premium products

Project installation recommendations

Contractor installation assistance

helping to bring your one-of-a-kind ideas to life

DETAILS€¦ · Acoustical and Drywall Suspension Systems • Integrates drapery pockets, window...

Documents

Transcript of DETAILS€¦ · Acoustical and Drywall Suspension Systems • Integrates drapery pockets, window...