Lazarus Manufacturing Drapery Hardware
-
Upload
eric-lazarus -
Category
Documents
-
view
232 -
download
5
description
Transcript of Lazarus Manufacturing Drapery Hardware
Decorative Hardware and Track Systems from Lazarus Manufacturing
9111 NW 105 Way, Medley FL 33178P 305.885.8904 F 305.885.8940
www.lazarusmanufactur ing.com
lazarusmanufacturing.comfor additional information
CS 510 SERIES Hand Drawn 6" or 8” Radius Pinch pleat 6” per width Wall One way One or Two way Cubicle 5” per width Ceiling 120 lbs draw Continuous Accordiafold 5” per width Two way Curving available Ripplefold* 6” per width 240 lbs from factory 6 lbs/ft Can be spliced
APPLICATION BENDABLE PLEATSTYLE STACKBACK MOUNTING MAXWEIGHT
SNAP CARRIER FOR ACCORDIAFOLD/STACKPLEAT
2004-25 for Accordiafold/Stack pleat 500/boxfor use with snap spacing tape. Alsoavailableinblack#59(add 10%).
END CAP W/ ECONOMY SLIDE
52301-25 400/boxMust add 2004-25 for Ripplefold*. Alsoavailableinbrown#65(add10%).
MASTER CARRIER MULTI-FUNCTIONAL 8-WHEELED
52502-25 Overlap Right 100/box52504-25 Underlap LeftFor stiffener & exposed or hidden baton (incl.screw).
TRACK SYSTEMS
ContractTrack is an aluminum extrusion, white, powder coated, and lubricated for wall or ceiling mount. And suitable for pinch pleat, Ripplefold* or accordiafold draperies.
PINCHPLEAT RIPPLEFOLD* ACCORDIAFOLD
1
lazarusmanufacturing.comfor additional information
WHEELED CONNECTED SNAP CARRIER FOR RIPPLEFOLD*/ROLL PLEAT
2107-25 500/roll60% fullness 2 - 5/8” OC, spacing 2106-25 80% fullness 2 - 3/8” OC, spacing 2105-25 100% fullness 2 - 1/8” OC, spacing2108-25 120% fullness 1 - 7/8” OC, spacingfor use with 4 1/4” snap tape.
TWO PIECE CONNECTED SNAP CARRIER WITH SQUARE BASE
2114-25 500/roll60% fullness 2 5/8” OC, spacing 2111-2580% fullness 2 3/8” OC, spacing 2112-25100% fullness 2 1/8” OC, spacing2115-25120% fullness 1 7/8” OC, spacingFor use with 4 1/4” snap tape.
BALL BEARING CARRIER
52000-25 slim-line (with 30% less stack back) 1,000/boxStainless steel bearings - lubricated. Alsoavailableinbrown#65.
TRACK SYSTEMS
CEILING BRACKET W/ SMART KLICK
WALL BRACKET 1 3/8”
3003-25 100/boxHeavy duty. Alsoavailableinbrown#65,silver#90.
3208-25 50boxRegular duty, 3/4” clearance Alsoavailableincolorsilver#90.1 1/2"1 1/2"
54109-25 30” with snap 125/box
54309-25 30” with adaptor
54110-25 36” with snap 125/box
54310-25 36” with adaptor
54111-25 48” with snap 125/box
54311-25 48” with adaptor
54112-25 60” with snap 125/box
54312-25 60” with adaptor
54113-25 72” with snap 125/box
54313-25 72” with adaptor
snapadaptor
3/8” FIBERGLASS BATON
4 lazarusmanufacturing.com for additional information
STIFFENER LARGE W/ GROMMET
9009-00 500/boxAdjustable for ceiling or wall mount.
STIFFENER SMALL W/ GROMMET
9011-00 500/boxFor sheers - Ripplefold*, Accordiafold
SNAP TAPE FOR RIPPLEFOLD*/ROLL PLEAT
SNAP TAPE FOR ACCORDIAFOLD - STACK PLEAT
9003-25 100yds/roll 4-1/4” O.C. Spacing
9006-25 100yds/roll 7-1/2” O.C. spacing 9007-25 8-1/2” O.C. spacing9008-25 10” O.C. spacing
2
lazarusmanufacturing.comfor additional information
28mm • 1 1/8„
H-RAIL SETS
1 1/4 ' '
3/4 ' '
1 5/16 ' '
5 3/16 ' '
2 3/8 ' '
2 5/8 ' '
3 5/8 ' '
2 3/8 ' '
Finial brass polishedchrome B124028-22 $35.00 ENDCAP brass satinbrass -24 $30.00 AvailableforH-Rail brass satinnickel -29 $35.00 brass bronzematte -70 $40.00 brass black -59 $35.00
Finial brass polishedchrome B3356-22 $165.00 RIVA brass satinbrass -24 $147.50 AvailableforH-Rail brass satinnickel -29 $165.00 brass bronzematte -70 $175.00 brass black -59 $165.00
Finial brass polishedchrome B690-22 $197.50 PESCARA brass satinbrass -24 $172.50 AvailableforH-Rail brass satinnickel -29 $197.50 brass bronzematte -70 $207.50 brass black -59 $197.50
Finial brass polishedchrome B3362-22 $200.00 AlASSIo brass satinbrass -24 $182.50 AvailableforH-Rail brass satinnickel -29 $200.00 brass bronzematte -70 $210.00 brass black -59 $200.00
Component Material Finish PartNo.
H-Rail Wall Bracket no. B11670 & 11672
H-Rail Ceiling Bracket with 2“ projectionno. B11873-50
3
lazarusmanufacturing.comfor additional information
Component Material Finish PartNo.
1 7/8 ' '
3 1/8 ' '
1 7/8 ' '
2 ' '
5/8 ' '
2 ' '
1 1/2 ' '
3 1/8 ' ' 2 3/8 ' '
1 1/8' '
H-Rail aluminum polishedchrome B808-28-22 SYSTEM19’ aluminum satinbrass -24 aluminum satinnickel -29 aluminum bronzematte -70 aluminum black -59
Bracket brass polishedchrome B11670-22 SINGlE brass satinbrass -24 brass satinnickel -29 brass bronzematte -70 brass black -59
Bracket brass polishedchrome B11672-190-22 DoUBlE brass satinbrass -24 brass satinnickel -29 brass bronzematte -70 brass black -59
Bracket brass polishedchrome B11873-50-22 CEIlING brass satinbrass -24 brass satinnickel -29 brass bronzematte -70 brass black -59
Carrier plastic white 52000-25 BAllBEARING
Carrier plastic 60%fullness,25/8”oCspacing 2114-25 2-PIECERIPPlEFolD* 80%fullness,23/8”oCspacing 2111-25 W/SQUAREBASE 100%fullness,21/8”oCspacing 2112-25 120%fullness,17/8”oCspacing 2115-25
MasterCarrier steel Rightoverlap 52502-25 BElTMASTER leftUnderlap 52504-25 11/2”oCspacing
MasterCarrier steel Rightoverlapw/snap 52502-25a BElTMASTER leftUnderlapw/snap 52504-25a W/SNAP 11/2”oCspacing
Drapery plastic white B899-2-00 DIVIDER
Rail brass brass B899-3-00 CoNNECToR
1 7/8 ' '
28mm • 1 1/8„
H-RAIL SETS
4
lazarusmanufacturing.comfor additional information
1 3/16“ / 30 mmTRADITIONAL WOOD
5
lazarusmanufacturing.comfor additional information
1130WEN-xxEndcap Finial11/8”P
1130CYL-xxCylinder Finial31/8”P
1130INC-xxInca Finial23/4”P
1130BOL-xxBola Finial2”P
19WWAND-xxWood Control WandLength: 40”
1030 SWO-xx13/16”D Wood Pole 13’
Lacquers: Varnishes:25 White 70 Hazel59 Black 71 Honey 72 Walnut 73 Natural
xx = ## color of item
1330WRI-xx13/16” Wood Ring w/ Eyelet17/8”ID x 21/2”OD
1230IMB-xxInside Mount Bracket21/4”D x 15/8”P
19CWAND-xxModern Control WandLength: 40”
1230CLA-xxClassic Open Bracket21/2”D x 33/8”P
1230CEI-xxCeiling Bracket2”D x 13/4”P
16WHOLD-xxWood Holdback25/8”D x 7”P x 21/4”W
7073
7271
2559
1230CYL-xxCylinder Bracket2”D x 31/2”P
1130CLA-xxClassic Finial21/4”D x 4”P
1130GRA-xxGranada Finial21/4”D x 21/2”P
1130VAL-xxValencia Finial2”D x 35/8”P
6
lazarusmanufacturing.comfor additional information
1 3/16“ / 30 mmROYAL WOOD
7
lazarusmanufacturing.comfor additional information
1251WIM-xxOpen Inside Mt Brckt11/2”P x 21/4”W
1251WBR-xxWood Bracket 4”P x 4”H x 11/4”W
1253WBR-xxExtended Bracket11”P x 4”H x 11/4”W
1151FLU-xxFluted Ball Finial23/4”D x 41/2”P
1151MEL-xxMelvin Finial23/4”D x 61/8”P
1151RIN-xxRinged Ball Finial 23/4”D x 41/8”P
1151SAX-xxSaxon Finial23/4”D x 61/8”P
1151TUD-xxTudor Finial23/4”D x 57/8”P
1151ACO-xxAcorn Finial23/4”D x 53/8”P
1151TRA-xxTraditional Finial 23/4”D x 61/4”P
1151WIN-xxWindsor Finial 23/4”D x 53/88”P
1151WEN-xxEndcap 21/4”D x 11/88”P
1151CUP-xxCup Finial23/4”D x 5”P
1251EUR-xxEuro Wood Bracket31/2”P x 23/4”W
00
70
7372
71
25
5945
46
4737
1051SWO-xxSmooth 2” PoleStock Length: 8’ & 16’
1051RSW-xxRouted 2” Smooth PoleStock Length: 8’ & 16’
1051RWO-xxReeded 2” PoleStock Length: 8’ & 16’
1051RRW-xxRouted 2” Reeded PoleStock Length: 8’ & 16’
00 UnfinishedLacquers:25 White 59 Black Varnishes: 70 Hazel 71 Honey 72 Walnut73 NaturalAntiques:37 Sand Gold45 Antique Black46 Black Gold47 Old Goldxx = ## color of item
1351WRI-xx2” Wood Ring with Eyelet21/2”ID x 31/22”OD
19WWAND-xxWood Control WandLength: 40”
19CWAND-xxModern Control WandLength: 40”
8
lazarusmanufacturing.comfor additional information
Brown track and components available at no additional cost.
2“ / 51 mmTRAVERSING & C-RING
9
lazarusmanufacturing.comfor additional information
Brown track and components available at no additional cost.
1352WRI-xx2” C-Ring
2”One Way Draw Set(2) ea. 1352WRI-xx C-Ring(2) ea. 52007-25,65 C-Ring Carrier(1) ea. 52405-90,65 Right Arm* & Hdwr
2”Center Draw Set(4) ea. 1352WRI-xx C-Ring(4) ea. 52007-25,65 C-Ring Carrier(1) ea. 52405-90,65 Right Arm & Hdwr(1) ea. 52406-90,65 Left Arm & Hdwr
1372WRI-xx23/4” C-Ring
Complete traverse system assemblies available (white or brown track available)
Complete c-ring system assemblies available (white or brown track available)
52405-xxRight Arm & Hdwr
52406-xxLeft Arm & Hdwr
23/4” One Way Draw Set(2) ea. 1372WRI-xx C-Ring(2) ea. 52007-25,65 C-Ring Carrier(1) ea. 52405-90,65 Right Arm* & Hdwr
23/4” Center Draw Set(4) ea. 1372WRI-xx C-Ring(4) ea. 52007-25,65 C-Ring Carrier(1) ea. 52405-90,65 Right Arm & Hdwr(1) ea. 52406-90,65 Left Arm & Hdwr
*overlap for one-way draw
*overlap for one-way draw
10
lazarusmanufacturing.comfor additional information
Brown track and components available at no additional cost.
2“ / 51 mmTRAVERSING & C-RING
11
lazarusmanufacturing.comfor additional information
70 Hazel73 Natural72 Walnut71 Honey 25 White 59 Black00 Unfinished
70
73
72
71
25
59
Fluted Ball Finial Melvin Finial
Ringed Ball Finial Saxon Finial
Tudor Finial Acorn Finial
Traditional Finial Windsor Finial
Endcap Cup Finial
Brown track and components available at no additional cost.
12
lazarusmanufacturing.comfor additional information
2 3/4“ / 70 mmROYAL WOOD
13
lazarusmanufacturing.comfor additional information
Open Inside Mount Bracket - 11/2”P1272WIM-00
1272WBR-0023/4” Wood Bracket7”P x 55/8”H x 11/4”W
1172FLU-00Fluted Ball Finial31/2”D x 5”P
1172MEL-00Melvin Finial31/2”D x 63/4”
1172RIN-00Ringed Ball Finial *31/2”D x 51/2”P
1172SAX-00Saxon Finial31/2”D x 61/2”P
1172TUD-00Tudor Finial31/2”D x 6”P
1172ACO-00Acorn Finial31/2”D x 51/2”
1172WIN-00Windsor Finial 31/2”D x 53/4”
1172WEN-00Endcap 31/2”D x 11/8”P
1172CUP-00Cup Finial31/2”D x 51/8”P
14WLSHI-00Large Shield Wood Rosette w/ Carved Post33/4”D x 43/8”P x 1”W
1372WRI-0023/4” Wood Ring w/ Eyelet33/8” ID x 5”OD
19WWAND-00Wood Control WandLength: 40”
1072SWO-00Solid 23/4” Smooth Wood Pole 13’
1072RSW-00Routed 23/4” Smooth Wood Pole 13’
1072RWO-00Solid 23/4” Reeded Wood Pole 13’
1072RRW-00Routed 23/4” Reeded Wood Pole 13’
14
lazarusmanufacturing.comfor additional information
1 3/16“ / 30 mmDECORATIVE METAL
15
lazarusmanufacturing.comfor additional information
2130END-22, 24, 29, 32Endcap Finial13/8”D x 3/4”P
2130CIL-22, 24, 29, 32Cilindro Finial11/2”P x 23/8”W
2130DAM-24, 29, 32Damasco Finial23/16”D x 31/8”P
2130VEL-22, 24, 29, 32Velate Finial23/8”D x 35/8”P
2130INC-24, 29, 32Inca Finial2”D x 23/8”P
2130TOS-22, 24, 29, 32Toscana Finial23/8”D x 13/4”P
2030SMP-xx16’ length
22 Polished Chrome24 Satin Brass29 Satin Nickel32 Antique Bronze
24
29
32
22
2230CIR-22, 23, 24, 29, 32Irati Closed Ceiling Bracket2”D x 23/4”P
2230TOL-23, 24, 29, 32Toledo Open Bracket21/2”D x 31/2”P
2230EVI-22, 23, 24, 29, 32Viani Extended Closed Bracket21/2”D x 71/2”P
2230IRA-22, 23, 24, 29, 32Irati Closed Wall Bracket2”D x 31/2”P
2230DIR-22, 23, 24, 29, 32Double Irati2”D
33/4” 21/2”
2230OIM-22, 23, 24, 29, 32Open Inside Mount Bracket11/2”D x 3/4”P
2330SHR-22, 23, 24, 29, 32Plastic Lined Smooth Hollow Ring w/ Clip-on Eyelet15/8”ID x 21/4”OD
26SWING-24, 29, 32Swing Holdback117/8”P
2130SWI-22, 23, 24, 29, 32Corner Connector
29MWAND-xxMetal Control Wand40” Length
16
lazarusmanufacturing.comfor additional information
1 3/16“ / 30 mmACERO STEEL
17
lazarusmanufacturing.comfor additional information
2130CLM-16 Round Brown2130CLB-16 Round Black13/8”D x 31/2”P
2130CUM-16 Square Brown2130CUB-16 Square Black13/8”D x 31/2”P
2130END-16Endcap Finial13/8”D x 3/4”P
2230CYL-16Cylinder Wall Brkt2”D x 31/2”P
2230CEI-16Cylinder Ceiling Brkt2”D x 23/8”P
2130SWI-16Corner Connector
2030SMP-1619’ length
2130ROL-16Steel Rollenbild Finial13/16”D x 33/8”P
2230OIM-16Open Insd Mt Brkt11/2”D x 3/4”P
2230TOL-16Toledo Wall Bracket21/2”D x 31/2”P
2130ROL-00Clear Rollenbild Finial13/16”D x 33/8”P
2330FRI-16Flat Ring17/8”I x 2”O
2130POP-16Pop Finial13/16”D x 7/8”P
2230EVI-16Extended Viana Wall Bracket 21/2”D x 71/2”P
29SWAND-16Square Wand 40”
29AWAND-16Round Wand 40”
2230DCB-16Double Cylinder Brkt2”D
2130VEL-16Velate Finial23/8”D x 35/8”P
2130INC-16Inca Finial2”D x 23/8”P
2230CIR-16Irati Ceiling Bracket2”D x 23/4”P
2230IRA-16Irati Wall Bracket2”D x 31/2”P
2230DIR-16Double Irati Wall Bracket2”D
31/2” 23/8”
3 3/4” 2 1/2”
18
lazarusmanufacturing.comfor additional information
1 3/16“ / 30 mmURBAN STEEL
19
lazarusmanufacturing.comfor additional information
3000END-16Urban End Cap11/2”H x 3/4”P
3000UCB-16Urban Ceiling Bracket13/4”P
3000UFB-16Urban Front Bracket3”H x 41/2”P
3000UDB-16Urban Double Bracket3”H
52005-25Button Slide
3000STP-16Urban End Stop
3000SPL-16Urban Joining Splice1/2”H x 23/8”P
3000URB-16Urban Rail 19’11/2”H x 1/2”W
29SWAND-16Square Wand 40”
29AWAND-16Round Wand 40”
3” 23/8”
20
lazarusmanufacturing.comfor additional information
1 1/4“ / 32 mmKONCEPT COLLECTION
21
lazarusmanufacturing.comfor additional information
2232KON-16Koncept Bracket2”H x 4”P
2232DKO-16Double Koncept Bracket2”H
2332SQR-16Square Ring w/ hook15/8”ID x 2”OD
2132KOF-16Koncept Finial211/16”H x 1”P
2132CUB-16Cubic Finial115/16”H x 115/16”P
2032SQP-16Square Pole 11/4”16’ length
27/8” 37/8”
22
lazarusmanufacturing.comfor additional information
1 3/16“ / 30 mmROYAL WROUGHT IRON
23
lazarusmanufacturing.comfor additional information
2130IEN-xx13/16 Wrought Iron End Cap13/8”D x 3/4”P
2130MEN-xxMendaur Finial21/4”D x 23/8”P
2130CAR-xxCarcola Finial 21/4”D x 63/8”P
29IWAND-xxIron Control WandLength: 40”
2030SIR-xx13/16“ Smooth Wrought Iron PoleLength 13’
37 Sand Gold59 Black33 Black Silver34 Black Brown40 Bronze Rust35 Grey Copper
xx = ## color of items
2330IRI-xx13/16 Smooth Rings15/8”ID x 23/8”OD
2230VUL-xxVulcano Bracket3”P x 5”H x 1”W
13/16 2230ILA-xxLateral Bracket11/2”D x 1”P
2230DUK-xx13/16”Duke Open Bracket33/4”P x 21/4”H x 1”W
2230DDU-xx13/16”& 3/4”Duke Double Open Bracket23/8”H x 1”W
2130BOL-xxBola Finial 21/2”D x 4”P
2130LIR-xxLira Finial 3”D x 61/8”P
2130SWI-xxAdj Corner Connector 13/16”
5933
34
4035
37
2230CEI-xxCeiling Bracket23/8”P
43/4” 3”
24
lazarusmanufacturing.comfor additional information
3/4“ / 20 mmVULCANO WROUGHT IRON
25
lazarusmanufacturing.comfor additional information
29IWAND-xxIron Control WandLength: 40”
2020SIR-xx3/4“ Smooth Wrought Iron PoleLength 13’
37 Sand Gold59 Black33 Black Silver34 Black Brown40 Bronze Rust35 Grey Copperxx = ## color of items
2320IRI-xx3/4” Smooth Rings11/4”ID x 13/4”OD
2120BOL-xxBola Finial31/8”P
2120FLA-xxFlair Finial63/8”P
2120KAR-xxKar Finial 31/4”D x 43/8”P
2220ILA-xxLateral Bracket1”P
2220CEI-xxCeiling Bracket23/8”P x 1”W
2120IEN-xxWrought Iron Endcap 3/4”1”D x 3/4”P
2220VUL-xxVulcano Bracket23/4”P x 5”H x 1”W
2230DDU-xx13/16” & 3/4” Duke Double Bracket33/4”D x 23/8”H x 1”W
2120SWI-xx3/4”Adj Corner Connector
5933
34
4035
37
43/4” 3”
2230DUK-xx13/16”Duke Open Bracket33/4”P x 21/4”H x 1”W
26
9111 NW 105 Way, Medley FL 33178P 305.885.8904 F 305.885.8940
www.lazarusmanufactur ing.com
* Ripplefold is a trademark of Kirsch