DESIGNER HANDLES STANDARD HANDLES - Assa Abloy · 2010-05-04 · exit device being used. Refer to...
Transcript of DESIGNER HANDLES STANDARD HANDLES - Assa Abloy · 2010-05-04 · exit device being used. Refer to...
ENTRY TRIM ACCESS CONTROLAC-7
Entry Trim Ordering Matrix
AC-7
Electrified Entry Trim
3080E SeriesFor 3000/8000 Series Exit Devices
260 Santa Fe StreetPomona, California 91767 (800) 872-3267 Fax: (800) 232-7329www.adamsrite.com
3080E Series Electrified Entry TrimThe 3080E Series provides outside activation of doors that have any type of Adams Rite Exit Device. Breakaway clutching mechanism protects the locked handle from vandalism or forced entry, in either direction. All models share the same core components, so handles can be
changed without having to replace the entire trim. Solid construction meets Grade 1 standards. A continuous duty solenoid mounted to the trim enables remote activation of the locking function without unlatching the door, making this trim ideal for stairwell and fire doors.
Handing0 No Handing7 Right Hand*8 Left Hand*
Cylinder Hole3 With Hole9 w/o Hole
Trim Cover Finish– STD (Black)M (Matching Finish)
Exit Device1 SVR3 Mortise4 SCVR6 CVR7 RIMU Universal Kit
FinishUS3 Bright Brass (605)US4 Satin Brass (606)US9 Bright Bronze**US10 Satin Bronze**10B Dark BronzeUS32 Bright Stainless (629)US32D Satin Stainless (630)
Handle 01 02 03 MD ME MG MI MJ MN* MV* MW
* Handing must be specified for MV and MN Series
** US9 and US10 available on special order. Consult factory for details.
3080E M– 01– 0 – 3 7 – 3 0 – US32D
©2009 Adams Rite Manufacturing Co.
3080E-MV
3080E-01
3080E-MN
3080E-MW
3080E-MJ
3080E-MI
3080E-ME
3080E-MG
3080E-02
DESIGNER HANDLES STANDARD HANDLES*
3080E-MD
3080E-03
Features0 Fail-Secure5 Fail-Safe
Voltage3 12 Volt DC5 24 Volt DC
*The 3080-01, -02, and -03 lever handles are designed to return within 1/2" of the door face. Handles in the Designer Series do not have this same feature. Please verify with local code requirements to ensure compliance.
StandardSeries
DesignerSeries
CYLINDER
ESCUTCHEON
SPACER
CYLINDERRETAINER
RING
SOLENOIDASSEMBLY
FLAT HEADSCREWS (2 PLCS)
#6-32 X 1/4”
ROTATIONLIMITING
PINS
CYLINDERCL
.1824.62
.80020.32
.120 R 3.05
CAM TOLERANCE:+_+_ .13
.005
1.948.26
3.2582.55
8.10205.74
5.00127.00
1.948.26
3.4587.63
8.10205.74
4.55115.57
1.948.26
2.9173.91
8.10205.74
4.35110.49
8.10205.74
3.691.44
1.948.26
5.125130.18
8.10205.74
4.3125109.54
1.948.26
3.687593.66
8.10205.74
3.3184.14
1.948.26
4.90625124.6
8.10205.74
3.7187594.46
5127
1.948.26
8.10205.74
3.62592.07
4.375111.1
1.948.26
8.10205.74
3.2582.55
1.948.26
4.1875106.4
8.10205.74
3.62592.08
1.948.26
4.5114.3
8.10205.74
4101.6
1.948.26
4.6875119.06
*The 3080-01, -02, and -03 lever handles are designed to return within 1/2" of the door face. Handles in the Designer Series do not have this same feature. Please verify with local code requirements to ensure compliance.
Entry TrimEntry Trim
INSTALLATION
OPTIONS
CYLINDERS
DIMENSIONS
Standard diameter five-pin unit with MS® cam, suitable for use with entry trim. All brass construction with front “scalp” available in finishes 628, 313 and 335. Available in quantity all keyed different (KD), in pairs (KA2) or fifty alike (KA50). Any other make standard mortise cylinder with MS® cam can be used to “key in” with existing systems.
3080E Series Entry Trim can accept any standard 1-5/32” diameter mortise cylinder with special MS® cam dimensioned as shown. Cylinders with MS® cams can be readily obtained from most cylinder manufacturers. See page SW-36 for cylinder make and trim ring information.
Door prep and installation will differ depending on type of exit device being used. Refer to Adams Rite Templates for 3080E Series Entry Trim preparation details.
Can be ordered with or without a hole for cylinder. Order standard mortise cylinder with MS® cam separately. Order 4603 Rectifier, 4605/4606 Transformer or PS-1 Power Supply separately.Door Preparation and Trim Installation
Cylinder and Solenoid Installation
Mortise Cylinder
Cylinder Cam
INCHESMILLIMETERS
4036-01
3080E-018*
©2009 Adams Rite Manufacturing Co.
3080E-02* 3080E-03*
3080E-MD 3080E-ME 3080E-MG
3080E-MI 3080E-MJ 3080E-MN
3080E-MV 3080E-MW