DESIGN OFFICE STABILITY AND STRENGTH...
Transcript of DESIGN OFFICE STABILITY AND STRENGTH...
Mr Piotr ŻelazekHead of Design Office
Mobile: +48 600 208 912
Mr Alfred Jazukiewicz
Project Manager Stability & Strength Design Department
Mobile: +48 600 208 928
Westcon Design Poland Sp. zo.o.
ul. Łukasińskiego 11671-215 Szczecin, Polandwww.westcondesign.com
Contact persons Company address
STABILITY AND STRENGTH DEPARTMENT
Mr Mr Piotr ŻelazekHead of Design OfficeHead
[email protected]@westco
Mobile: +48 600 208 912 Mobile: +48 600 20
Mr Alfred Jazukiewicz
Project Manager Stability & Strength Design DepartmentStability & Strength Design Department
Mobile: +48 600 208 9288 600 208 928
Westcon Design Poland Sp. zo.o.Westco
ul. Łukasiul. Łukasińskiego 116ński71-215 Szczecin, Poland71-215 Szczecin,www.www.westcondesign.com westcondesig
Contact persons Company address
USED SOFTWARE : NAPA, ANSYS, NISA / DISPLAY III, NAUTICUS, POSEIDON, RULESCALC, MARS, RHINOCEROS, AUTOCADUSED SOFTWARE : / DISPLAY III, NAUTICUS, POSEIDON, RULESCALC, MARS, RHINOCEROS, AUTOCADNAPA, ANSYS, NISA /
DESIGN OFFICE
Mr Piotr ŻelazekHead of Design Office
Mobile: +48 600 208 912
Mr Alfred Jazukiewicz
Project Manager Stability & Strength Design Department
Mobile: +48 600 208 928
Westcon Design Poland Sp. zo.o.
ul. Łukasińskiego 11671-215 Szczecin, Polandwww.westcondesign.com
Contact persons Company address
STABILITY AND STRENGTH DEPARTMENTSTABILITY AND STRENGTH DEPARTMENT
Stability & Strength / Dynamics
Department(SSD) is not only able to
perform at different project stages all
NAPA related calculations, like:
hull shape modeling,
body line fairing,
theoretical calculations,
hydrostatics,
intact & damaged stability
container stowage plan,
grain loading plan,
but also
>> inclining experiments,
>> basing on existing/modified
construction drawings preparation
of updated Stability documents,
and
>> hull members strength assessment
with class software (Poseidon/GL,
Nauticus/DNV, RulesCalc/LR, Mars/BV),
>> rule longitudinal strength calculations
using class software (Posejdon,
Nauticus, RulesCalc, Mars),
>> direct strength calculations of hull
constructions with Finite Element
software of ANSYS and NISA / DISPLAY,
>> dynamic analysis of hull structures
with Finite Element software of ANSYS
and NISA/DISPLAY.
Stability & Strengt
Department(SSD) is no
perform at different p
NAPA related calculation
hull shape modeling,
body line fairing,
theoretical calculatio
hydrostatics,
intact & damaged sta
container stowage pl
grain loading plan,
but also
>> inclining experiments
>> basing on existing/mo
construction drawings
of updated Stability do
and
DESIGN OFFICE