Department of Industrial & Systems Engineering M.Sc.(SCM) Program Briefing Presented By A/Prof Lee...

23
Department of Industrial & Systems Engineering M.Sc.(SCM) Program Briefing Presented By A/Prof Lee Loo Hay M.Sc.(SCM) Program Director 12 August 2015

Transcript of Department of Industrial & Systems Engineering M.Sc.(SCM) Program Briefing Presented By A/Prof Lee...

Page 1: Department of Industrial & Systems Engineering M.Sc.(SCM) Program Briefing Presented By A/Prof Lee Loo Hay M.Sc.(SCM) Program Director 12 August 2015.

Department of Industrial & Systems Engineering

M.Sc.(SCM) Program Briefing

Presented By

A/Prof Lee Loo Hay

M.Sc.(SCM) Program Director

12 August 2015

Page 2: Department of Industrial & Systems Engineering M.Sc.(SCM) Program Briefing Presented By A/Prof Lee Loo Hay M.Sc.(SCM) Program Director 12 August 2015.

Department of Industrial & Systems Engineering

Agenda• Welcome Address - Chair, Joint Academic Committee

• M.Sc.(SCM) Program Briefing Curriculum Candidature Study Workload – IMPORTANT! Online Module Registration Leave Of Absence Continuation and Graduation Requirements LI5001 Research Project Other Admin Matters

• Question and Answer Session

• End of Briefing

2

Page 3: Department of Industrial & Systems Engineering M.Sc.(SCM) Program Briefing Presented By A/Prof Lee Loo Hay M.Sc.(SCM) Program Director 12 August 2015.

Department of Industrial & Systems Engineering

Welcome Address

By

Prof Tang Loon Ching

ChairJoint Academic Committee

3

Page 4: Department of Industrial & Systems Engineering M.Sc.(SCM) Program Briefing Presented By A/Prof Lee Loo Hay M.Sc.(SCM) Program Director 12 August 2015.

Department of Industrial & Systems Engineering

Master of Science(Supply Chain Management)

A/Prof Lee Loo HayProgram Director

[email protected]

Specify Subject: “MSc(SCM) Enquiry”

Page 5: Department of Industrial & Systems Engineering M.Sc.(SCM) Program Briefing Presented By A/Prof Lee Loo Hay M.Sc.(SCM) Program Director 12 August 2015.

Department of Industrial & Systems Engineering

Master of Science(Supply Chain Management)

• A multi-disciplinary program in Supply Chain Management integrating topics from Business and Engineering.

• Jointly hosted by Dept. of Industrial & Systems Engineering (ISE) The Logistics Institute, Asia-Pacific (TLI-AP) Dept. of Decision Sciences, Biz School

Page 6: Department of Industrial & Systems Engineering M.Sc.(SCM) Program Briefing Presented By A/Prof Lee Loo Hay M.Sc.(SCM) Program Director 12 August 2015.

Department of Industrial & Systems Engineering

M.Sc.(SCM) Degree Requirements

• CORE Modules (Compulsory) (Total 12 MC)1. LI 5101 Supply Chain Mgt Thinking & Practice2. DSC 5211A Supply Chain Coordination and Risk Mgt3. IE 5105 Modeling for Supply Chain Systems

• Project (Compulsory) LI 5001 Research Project (8 MC)

• 5 Elective Modules (Total 20 MC)

• Complete and pass 40 Modular Credits (MC) with a Cumulative Average Point (CAP) ≥ 3.0

Page 7: Department of Industrial & Systems Engineering M.Sc.(SCM) Program Briefing Presented By A/Prof Lee Loo Hay M.Sc.(SCM) Program Director 12 August 2015.

Department of Industrial & Systems Engineering

List of ElectivesDecision Sciences (Choose at least 1 module)BDC5101 Deterministic Operations Research Models (Preclusion: IE5001)

DSC4215 Supply Chain Visualization & Actionable Intelligence

DSC5211B Analytical Tools for Consulting

DSC5211C Quantitative Risk Management (Pre-requisite: DSC5211B)

ISE (Choose at least 1 module)IE5001 Operations Planning and Control I (Preclusion: BDC5101)

IE5004 Engineering Probability and Simulation

IE5107 Material Flow Systems

IE5108 Facility Layout and Location (Pre-requisite: IE5001)

IE5205 Healthcare System and Analytics

IE5504 Systems Modeling and Advanced Simulation

OthersLI5201 Special Topics in Logistics

LI5202 Supply Chain Management Strategies and Case Studies7

Page 8: Department of Industrial & Systems Engineering M.Sc.(SCM) Program Briefing Presented By A/Prof Lee Loo Hay M.Sc.(SCM) Program Director 12 August 2015.

Department of Industrial & Systems Engineering

Period of Candidature

• Part Time Studies Minimum 2 years (4 semesters) Maximum 4 years (8 semesters)

• Full Time Studies Minimum 1 year (2 semesters) Maximum 2 years (4 semesters)

Page 9: Department of Industrial & Systems Engineering M.Sc.(SCM) Program Briefing Presented By A/Prof Lee Loo Hay M.Sc.(SCM) Program Director 12 August 2015.

Department of Industrial & Systems Engineering

Study Work Load

• Part Time Students 2 coursework modules (without LI5001) 1 coursework module + LI5001

• Full Time Students 5 coursework modules (without LI5001) 3 coursework modules + LI5001 

• Additional Module Possible with valid reason and high CAP Subject to approval / vacancy Application form on the web

Page 10: Department of Industrial & Systems Engineering M.Sc.(SCM) Program Briefing Presented By A/Prof Lee Loo Hay M.Sc.(SCM) Program Director 12 August 2015.

Department of Industrial & Systems Engineering

Maximum Work Load

10

• Part Time Students 12 MCs

• Full Time Students 20 MCs 

Page 11: Department of Industrial & Systems Engineering M.Sc.(SCM) Program Briefing Presented By A/Prof Lee Loo Hay M.Sc.(SCM) Program Director 12 August 2015.

Department of Industrial & Systems Engineering

Online-Registration of Modules

• When? 03 Aug 2015 (0900hrs) to 23 Aug 2015 (2359 hrs)

• Where? http://www.gse.nus.edu.sg/online

• Link available from: http://www.ise.nus.edu.sg/scm_students/index.html

• Cross Faculty/ Cross Department Modules Not more than 2 elective (8 MCs) modules at 5000 level or above can be

taken outside the list of approved MSc(SCM) modules

Approval needed from M.Sc.(SCM) Program Director and module host department

Apply before 17 Aug 2015 (09:00am)

Page 12: Department of Industrial & Systems Engineering M.Sc.(SCM) Program Briefing Presented By A/Prof Lee Loo Hay M.Sc.(SCM) Program Director 12 August 2015.

Department of Industrial & Systems Engineering

Dropping a module• Before 23 Aug 2015: without penalty• 24 Aug – 27 Sep 2015 : W-grade**• From 28 Sep 2015 : F-grade**** ‘W’ = ‘Withdrawn’, and ‘F’ = ‘Fail’

Absent from Examination

• Deemed to have sat and failed unless with valid reasons

IMPORTANT

Page 13: Department of Industrial & Systems Engineering M.Sc.(SCM) Program Briefing Presented By A/Prof Lee Loo Hay M.Sc.(SCM) Program Director 12 August 2015.

Department of Industrial & Systems Engineering

Leave of Absence (LOA)• Leave of Absence within Semester

Business Trips, ICT, Medical, etc. Max allowed: 3 weeks, 4 weeks if include NS duties Check with Module Instructors on policy for missing

mid-terms, assignments, etc.

• Leave of Absence for Whole Semester Up to 2 semesters of leave not counted towards the

maximum candidature period Applicable if more than 3 weeks (or more than 4

weeks if include NS duties)

• Application must be submitted via MYISIS at least 2 weeks in advance of proposed leave period

Page 14: Department of Industrial & Systems Engineering M.Sc.(SCM) Program Briefing Presented By A/Prof Lee Loo Hay M.Sc.(SCM) Program Director 12 August 2015.

Department of Industrial & Systems Engineering

CAP System for Continuation and Graduation

• CAP (Cumulative Average Point)

= Average grade point of all modules taken

• Academic Warning: CAP < 3.0

• Termination of candidature ifCAP in 1st semester < 2.0 or

For 2 consecutive semesters, CAP < 3.0

Page 15: Department of Industrial & Systems Engineering M.Sc.(SCM) Program Briefing Presented By A/Prof Lee Loo Hay M.Sc.(SCM) Program Director 12 August 2015.

Department of Industrial & Systems Engineering

Grade Points

Grade Grade Point

A+ 5.0

A 5.0

A- 4.5

B+ 4.0

B 3.5

B- 3.0

C+ 2.5

C 2.0

D+ 1.5

D 1.0

F (Fail) 0

Page 16: Department of Industrial & Systems Engineering M.Sc.(SCM) Program Briefing Presented By A/Prof Lee Loo Hay M.Sc.(SCM) Program Director 12 August 2015.

Department of Industrial & Systems Engineering

Graduation Requirements• Complete and pass total 40 MC with CAP ≥ 3.0:

All 3 core modules (12 MC)Project LI 5001 (8 MC)5 Electives (20 MC)

• Not more than 8 MC can be at level 4000. The rest must be at Level 5000.

• Not more than 2 elective (8 MC) modules at 5000 level or above can be taken outside the list of approved MSc(SCM) modules

• Cannot repeat a module which has passed for the purpose of improving the CAP.

• If fail a core module or project: Repeat it• If fail an elective module: Repeat it or take another one

Page 17: Department of Industrial & Systems Engineering M.Sc.(SCM) Program Briefing Presented By A/Prof Lee Loo Hay M.Sc.(SCM) Program Director 12 August 2015.

Department of Industrial & Systems Engineering

LI 5001 Research Project• Link: http://www.tliap.nus.edu.sg/mscm/LI5001.aspx

• 8 Modular Credits (8 MC)

• Full-Time Students - Done over 1 semester

• Part-Time Students Self- generated project : Can be done in 1 or 2 semesters TLI-AP sourced project : Must be done in 1 semester

• Complete under supervision of a faculty member in area of Supply Chain Management. Scope and nature approved by supervisor and company.

17

LI5001 Briefing

To be announced!

Page 18: Department of Industrial & Systems Engineering M.Sc.(SCM) Program Briefing Presented By A/Prof Lee Loo Hay M.Sc.(SCM) Program Director 12 August 2015.

Department of Industrial & Systems Engineering

• Personal Particulars - Log in to myISIS website at

https://myisis.nus.edu.sg

• Official Announcements

- Will be sent to your NUS student email accounts

- Please clear your mailboxes regularly to avoid missing important emails

IMPORTANT

Page 19: Department of Industrial & Systems Engineering M.Sc.(SCM) Program Briefing Presented By A/Prof Lee Loo Hay M.Sc.(SCM) Program Director 12 August 2015.

Department of Industrial & Systems Engineering

M.Sc.(SCM) Students Website:

• Important announcements

• Course-related information

• Class and exam timetables

• Student Forms

• MSc Student Handbook

• MSc FAQ

• Links to important websites

http://www.ise.nus.edu.sg/scm_students/index.html

Page 20: Department of Industrial & Systems Engineering M.Sc.(SCM) Program Briefing Presented By A/Prof Lee Loo Hay M.Sc.(SCM) Program Director 12 August 2015.

Department of Industrial & Systems Engineering

ISE Department Website:

http://www.ise.nus.edu.sg

Engineering Graduate Studies Office Website:

http://www.gse.nus.edu.sg

Page 21: Department of Industrial & Systems Engineering M.Sc.(SCM) Program Briefing Presented By A/Prof Lee Loo Hay M.Sc.(SCM) Program Director 12 August 2015.

Department of Industrial & Systems Engineering

MSc Program Executive

Mr. Tang Kang Wei

[email protected]

Page 22: Department of Industrial & Systems Engineering M.Sc.(SCM) Program Briefing Presented By A/Prof Lee Loo Hay M.Sc.(SCM) Program Director 12 August 2015.

Department of Industrial & Systems Engineering 22

Page 23: Department of Industrial & Systems Engineering M.Sc.(SCM) Program Briefing Presented By A/Prof Lee Loo Hay M.Sc.(SCM) Program Director 12 August 2015.

Department of Industrial & Systems Engineering