PARISUTHAM INSTITUTE OF

TECHNOLOGY AND SCIENCE

Department Of EEE

Welcomes you

POWER ELECTRONICS

Prepared by,

K.ANISH L/EEE

AIM AND OBJECTIVES

AIM : To enable the student to study the various Concepts related to power electronics.

OBJECTIVES: • To study concept of power semi- conductor. • To study about converters.

• To study the concepts related to DC to DC converters.

• To learn about inverters • To understand the concepts

of controllers.

SYLLABUSUNIT I POWER SEMICONDUCTOR

DEVICESPower diodes – Power transistors –

MOSFET and IGBT – Construction and characteristics of SCR – Turn-on and Turn-off methods – Two-transistor model – Switching performance – Triggering circuits – TRIAC – Snubber circuits – Special semiconductor devices.

UNIT II PHASE-CONTROLLED CONVERTERS

2-pulse – 3-pulse and 6-pulse converters – Performance measures – Inverter operation of fully controlled converter – Effect of source impedance – Effect of load inductance.

 

UNIT III DC TO DC CONVERTERS

Step-down and step-up choppers – Time ratio control and current limit control – Switching mode regulators – Buck – Boost – Buck-Boost and cuk converter – Resonant switching based SMPS.

UNIT IV INVERTERSForced commutation techniques –

Single-phase and three-phase (both 120° mode and 180° mode) inverters – PWM techniques – Voltage and harmonic control – Series resonant inverter – Voltage and current source inverters.

UNIT V AC VOLTAGE CONTROLLERS Principle of on-off control and

phase control – Single-phase bidirectional controllers with R and RL loads – Three-phase full-wave controllers – Three-phase bidirectional delta-connected controllers – PWM control – Cycloconverters: Single-phase and Three-phase

POWER ELECTRONICS

Power electronics is the technology associated with the efficient conversion, control and conditioning of electric power by static means from its available input form into the desired electrical output form.

UNIT I POWER SEMICONDUCTOR DEVICESSome semiconductor switching

devices:o Power diodeso Power transistorso MOSFET and IGBTo TRIACo Special semiconductor devices

LASER DIODES

UNIT II PHASE-CONTROLLED CONVERTERS

Definition: A converter that changes the number

of phases in an alternating-current power source without changing the frequency.

Related topics:

2-pulse converters 3-pulse converters 6-pulse converters Effect of source impedance. Effect of load inductance.

UNIT III DC TO DC CONVERTERSDefinition:

DC to DC converter is a device that accepts a DC input voltage and produces a DC output voltage.

DC-DC converters are electronic devices used whenever we want to change DC electrical power efficiently fromone voltage level to another.

Step-down and step-up choppers Time ratio control and current limit

control Buck converter Boost converter Buck-Boost converter Cuk converter Basics concepts on SMPS

UNIT IV INVERTERSINVERTERS:An inverter is an electrical device that

converts direct current (DC) to alternating current (AC); the converted AC can be at any required voltage and frequency with the use of appropriate transformers, switching, and control circuits.

Single-phase inverters. Three -phase inverters. PWM techniques. Voltage and harmonic control. Series resonant inverter.

UNIT V AC VOLTAGE CONTROLLERS Single-phase bidirectional controllers(

with R and RL loads). Three-phase full-wave controllers. PWM control. Cycloconverters (both single and three phase).

SEMINAR TOPICS MOSFET. Special semiconductor devices. Inverter operation. PWM techniques. Three-phase full-wave controllers. Cycloconverters.

ASSIGNMENT TOPICS Two-transistor model. Buck-Boost and cuk converter. Voltage and current source inverters

URL http://www.varsitynotes.com/electri

cal_engineering/power_electronics.html.

http://www.filestube.com/5e6dfc52274ee4ec03ea,g/power-electronics-notes-by-mit.html.

http://wiki.answers.com/Q/Btech_eee_3yr_1sem_power_electronics_notes.

 

THANK YOU