Decorative & Solid Surfacing Jan 09
-
Upload
first-sight-graphics -
Category
Documents
-
view
213 -
download
0
description
Transcript of Decorative & Solid Surfacing Jan 09
The Perfection of a Super Matt Paint Look.
David Clouting Ltd. Perry Road, Witham, Essex CM8 3UDTel: 01376 518037 Fax: 01376 500104 Email: [email protected] Web: www.davidclouting.co.uk
decorativesurfaces
&
The addition of super-thick, super-light EUROLIGHT® Worktops to its new
range of stylish and durable kitchen worktops is proof of EGGER UK’s
responsiveness to the anticipation of market trends.
EUROLIGHT® worktops are a significant introduction for the kitchen industry
and have been developed following an increasing demand for thicker work
surfaces.
Kitchen specifiers and designers now have a choice of thicknesses in EGGER’s
new worktop range, which also features a combination of the very latest decor
trends alongside mainstream classics, to find favour in both ultra modern and
traditional kitchens.
The 38mm EUROSPAN® Worktops (chipboard core) and 60mm
EUROLIGHT® Worktops (cardboard honeycomb core) are available to provide
customers with both aesthetic and practical options.
A key benefit of the EUROLIGHT® 60mm worktops to fitters and installers is
their weight – approximately 41% lighter than traditional 38mm chipboard
worktops. This makes them easier to handle, transport and install. The rigid
honeycomb core and sandwich construction uses surface layers of the very
robust Eurospan® 2000 thin chipboard which means there is no compromise
in stability or quality.
Designs and styles which offer the perception of high value, in thicknesses
which previously would have been impractical, can be created using
EUROLIGHT® and will be of huge interest to end consumers.
As the market leader in the very latest décor trends for melamine faced
chipboard, EGGER has used its renowned design competence to create its new
worktop range.
The new range has an exciting choice of 18 decors available in both thicknesses
and includes the latest trends in colour and texture, ranging from white, oxidised
metal to exotic woods, which sit alongside a selection of the best contemporary
themes, such as butcher block woods, granite and terrazzo.
EGGER has also developed an innovative range of accessories for
EUROLIGHT® worktops, including worktop connector bolts, a sink and hob
installation system and a hard wearing, robust worktop template for ease of use.
EGGER is taking its service to another level with the new range. To help kitchen
fitters and designers get to grips with these new EUROLIGHT® 60mm worktops
EGGER has invested a great deal of time and money in creating comprehensive,
step-by-step fitting instructions. There is also a dedicated sample hotline where
brochures, swatches and point of sale materials can be ordered.
EGGER has also engineered the surface texture of each worktop to individually
offer the most realistic reproduction possible, both visually and to the touch. For
example EGGER’s Perfect Matt ST9 texture is a smooth, matt finish which
reproduces the feel of concrete, sandstone and wood veneer, whilst its Granito
ST82 texture is deep and undulating similar to that of a sandblasted granite
surface.
The new range has also undergone rigorous industry testing and has been
awarded the prestigious FIRA Gold Award. The surface of all the worktops in the
range consist of a decorative laminate, which conforms to the EN438 standard
to guarantee a hard wearing surface, which is highly resistant to abrasion, impact
and household stains.
EGGER has set up a UK and Ireland distributor network to supply worktops
quickly and in smaller volumes. The following distributors are currently in place:
Tayfirth Laminates (Scotland), Décor Panel (Northern England), Blackheath
Laminates (Midlands/Southern England), KBB (N.Ireland and Republic of
Ireland) and Cookstown Panel Centre (N.Ireland).
To view the range or find out more visit www.egger.co.uk or contact AndrewSanderson, Product Manager:Tel: 01434 613360Fax: 01434 613302Email: [email protected] hotline 01434 613304
New EGGER Worktop RangeOffers the Latest in Style,Design and Performance
Above: Eurolight 60 mm worktop in Platinum White (W980 ST82) with Hacienda Black(H3081 ST22) MFC doors.
Below: Eurolight 60 mm worktop in Platinum White (W980 ST82)
January 2009 | Decorative & Solid Surfacing 3
January 2009
This supplement is targeted at kitchen/furniture designers,
manufacturers and specifiers within the KBB industry including
shopfitters, exhibition stand builders and purchasers of
decorative surfaces.
Further supplements will be published and circulated with Panel
Production throughout 2009.
Products to be features in future issues will include Laminates,
Veneers, Foils, MFC, Marble, Granite, Glass, Stone, Acrylic,
Edging and wood-based material and products.
Published by EC Media Ltd
Tel/Fax: 020 8366 3331
Email: [email protected]
Website: www.panelproduction.com
Publisher: Ernie Hollister
Designer: Ian Curtis
Printer: The Magazine Printing company
Reproduction of any material appearing in the supplement is
strictly by copyright – no part of this publication may be copied
or transmitted in any form whatsoever including photography
without the prior consent of the publisher.
©COPYRIGHT – EC MEDIA LTD
PUBLISHED AS A SUPPLEMENT WITH PANEL PRODUCTION
CONTENTSNew Egger worktop range offers the latest in style,
design and performance IFC
David Clouting Ltd – UK distributor for LG Chem
introduce three new product ranges p4-5
Bellisimo – brings a touch of ‘Glass’ to interiors p6
Add a touch of Finesse p6
Solid hardwood worktops John Boddy Timber p7
High gloss laminate used for new Glasgow Casino p8
Alchemy and nature inspire 3 form’s stunning
material platforms p9
Kronospan unveils fresh new collection for 2009 p9
EDP – delivering even more p10
Great impressions in Duropal’s latest worktops p10
A class act on the worktop scene IBC
Benefits of Hi-Macs® OBC
creativityunlimited
LG HI-MACS® Natural Acryllic Stone™ - Engineered to be the new standard
For futher information please contact the James Latham Marketing Department
0116 257 3415fax: 0116 281 3806 e-mail: [email protected] web: www.lathamtimber.co.uk
James Latham Marketing Department Chartwell Drive, Off West Avenue, Wigston, Leicester, LE18 2FN
www.lgchemeurope.com
LG HI-MACS® Natural Acrylic Stone™, manufactured by LG Chem and supplied by James Latham Plc, is ideal for many domestic and commercial sectors, includinghealthcare, education, shopfitting and catering. The rangefeatures a colour offering of over 60 decors, including the ‘Solid Colours’ and ‘Volcanics’ collections, with LG DecoBowl™, LG DecoSink™ and LG Shower Trays™also on offer.
• Available in 6, 9 and 12mm
• Extensive stock holding countrywide
• Customer colour matching, two pallets only
• Special sizes available
• 15 year limited installed warranty
• Technical support and training available
• LGA hygiene certificate
• Samples and literature available
• Product specialists at all James Latham depots
• Discounts available on showroom displays
• Adhesives, adhesive guns, mixer nozzles and counter top cleaner also supplied
ALL PRODUCTS ARE OFFERED EX STOCK OR WITHIN SEVEN DAYS FROM THE EUROPEAN DISTRIBUTION CENTRE
David Clouting Ltd.Perry Road, Witham, Essex CM8 3UDTel: 01376 518037Fax: 01376 500104Email: [email protected]: www.davidclouting.co.uk
introDavid Clouting is a distributor of various sheet materials. Established in 1985. We are now a leading supplier into the UK domestic furniture market.
Three new product introductions in 2008 has enabled us to develop an exciting range for the commercial and domestic sectors.
A signi cant relationship began in 1996. when LG Chem appointed David Clouting as its UK distributor for LG Nutrex PVC lms. Nutrex is a range of 2D and 3D thermo-formable vinyls in high gloss, printed and solid colour nishes.
With LG Chem’s technical advances and investment in product development and our market expertise, Nutrex has become a leading brand product in the UK furniture industry.
To continue the great success we are pleased to announce the launch of two new lms from LG Chem and a high gloss Acrylic Sheet from EGR:
lm that laminates to the back of glass. Perfect for both domestic and commercial markets.
lms aimed at the commercial and shop tting sectors.
sheet multi-purpose product.
“Versatile Fashionable Vinyls”
Nutrex 3D forming PVC veneers are available in a range of nishes to ensure that kitchen, bedroom, bathroom, living and commercial areas can be designed where the product compliments and adds to the visual experience.
2D versions of the vinyls are available for pro le wrapping. Applied to MDF, Nutrex expands the possibilities of furniture design.
Premium High Gloss was introduced in 2008 in response to the increasing demand for quality high gloss kitchens, bedrooms and bathrooms.
A new manufacturing line, installed by LG, ensured a high quality high gloss product is produced, with capacity available to ensure that customers are serviced with standard stock and make to order lead-times.
Key benefits of Premium High Gloss:
temperature
forming
- reduced “orange peel” effect.
Woodgrain designs are the most realistic available, available in three different grades:
“Mirain” grade introduces 3D visual prints. The printing technique takes PVC gravure printing to a new level of realism. “Mirain” is world class and provides the most realistic representation of wood veneer.Premium Woodgrains: Pearlescent printing has been a major success for woodgrain designs and remains highly popular in looking for authenticity and a natural look. Standard Woodgrains are widely used and nd their niche in budget ranges where contemporary looks are combined with durable lacquer and emboss combinations.
Glasen is bringing specialised printing technology to glass lms for the
glass, the ultimate high gloss product in both looks and surface performance.
Glasen from LG is a special interior lm that laminates to the back of a single sheet of glass.
There is a range of stunning designs that revolutionise how decorative glass can be used.
High pearl printing gives a wonderful 3D effect to provide a high quality product that consumers will aspire to.
Suitable for both domestic and commercial markets, typical applications are:
“The Ultimate High Gloss Product”
lms developed for the commercial and shop tting sectors that provides a total redecoration solution.
be styled and modi ed without the disruption of replacing existing xtures and ttings.
The range consists of:
nishes) nishes).
including:
product that gives a superior high gloss glass appearance without all the installation restrictions and cost of glass, or the design limitations of aluminium.
Providing a sleek and modern nish with a range of
to give your kitchen, bathroom, or bar and recreation areas a new designer look!
Whether you use it as a kitchen splashback, shower recess, a feature wall or facias for drawers and cupboards,
new and renovated rooms.
crack, warp, shatter, stain or distort from normal household activities.
“A Splash of Living Colour”
“Complete Room Modi cation without Disruption”
6 Decorative & Solid Surfacing | January 2009
Bellissimo Furniture has brought out the perfect
material for today’s minimalist interiors, from kitchens and
bathrooms to commercial premises, such as shops, bars
and offices. Zenolite looks like glass and beads water in
the same way where applicable, but has 25 times the
impact resistance. Applications range from room dividers,
doors, wall panels and furniture, to splashbacks in
kitchens and bathrooms.
Zenolite is made from an optical polymer which offers
a high-gloss finish in numerous colour options without
the weight, installation and cost restrictions of glass.
Ideal for home or commercial applications, Zenolite
represents a stunning new option for furniture and
surfaces, which is perfect for contemporary interiors. It
can replace tiles and many of the more traditional
panelling materials.
Bellissimo managing director Warnock Watson said:
“Glass has been used tentatively in some situations where
a more robust material would allow a bolder design
approach. Zenolite allows designers to achieve the glass
look with none of the draw backs and restrictions. It has
tremendous visual and practical appeal.”
For more information:Tel: 01772 696959Email: [email protected]
The Finesse range of veneered MDF and particleboard
is perfect for furniture, cabinet-work and shopfitting due
to its high quality face veneers, core board, product
consistency, and it provides real value for money. Finesse
veneered panels are graded to meet the exacting demand
of James Lathams’ customer base. It is available in a range
of decors, including traditional species such as Oak, Ash
and Maple, plus Black Walnut, Zebrano, Cedar of Lebanon
and many others. Finesse is available in thicknesses from
6mm to 31mm ex stock, with alternative thicknesses also
available to order. Standard board size is 2440mm and
3050mm x 1220mm, but sizes up to 3050mm x 2070mm
can be supplied to order.
For more information:Tel: 0116 257 3415www.lathamtimber.co.uk
Ideal for home or commercial applications, Zenolite represents a stunning new option forfurniture and surfaces
Bellissimo Brings a Touchof “Glass” to Interiors
Add a Touch of Finesse
The Finesse range of veneered MDF and particleboard is available from James Latham in alarge range of decors
January 2009 | Decorative & Solid Surfacing 7
To complement their wide range of kitchen mouldings,
John Boddy Timber have introduced a special range of
quality solid hardwood worktops.
The unfinished laminated block style worktops offer
superb choice and variety to enhance many different
kitchen designs. The species available are: Ebiara, Ash,
Beech, Beech Red Heart, European Cherry, Iroko, Maple,
West African Mahogany, European Oak, European Walnut,
Wenge and Zebrano.
The worktops are all 40mm thick available in
dimensions of 3000mm x 650mm, 4200mm x 650mm
and 3450mm x 900mm.
This is yet another extra service from John Boddy
Timber following their substantial ongoing investment in
top of the range production equipment for value-added
timber products.
Tel: 01423 320204/214Fax: 01423 324334Email: [email protected]
Solid Hardwood Worktops fromJohn Boddy Timber
Samples of JBT Solid Hardwood Worktops
nowonline
Keep informed with ourinstallation/user stories, companyprofiles and industry news at theclick of a button.
Our website directory is a quickand easy way to find the companyyou are looking for, with our diarypage keeping you up to date withimportant industry events.
Our magazine archives allowinstant access to past journals soyou will never miss an issue.
Join us online now
www.panelproduction.com
8 Decorative & Solid Surfacing | January 2009
The new Alea Glasgow Casino features Abet’s new high gloss HR LAQ
high pressure laminate in all its washrooms.
Decra Plastics worked with casino architects Real Studios Limited to
design the washrooms and specified Abet’s HR LAQ as it not only
provided a collection of bold and bright colours but also provided very
high resistance to scratching, wear and abrasion making it perfect for
this kind of application where the combination of high performance
and visual appeal are paramount.
HR LAQ is a Collection of Horizontal Grade Standard (HGS) laminate
which provides architects and designers with a choice of 24 bold and
bright colours. Having only recently been launched, it has already
proved very popular with architects, designers and shopfitters
worldwide. In response to this, Abet will be extending the range of
finishes and colours for HR LAQ and in addition, the company will add
certain decorative designs and finishes from other Collections to the
range, including the popular Legni woodgrain and I Finti ranges.
Samples and technical literature are available from Abet's sampleline:Tel: 020 7473 6915www.abetuk.com
High Gloss Laminate Used for New Glasgow Casino
Abet’s HR LAQ is a collection of Horizontal Grade Standard laminate with a choice
of 24 bold and bright colours providing a choice to architects and designers ▼
January 2009 | Decorative & Solid Surfacing 9
Founded in 1991 in America, 3form created a vision to
develop design-driven materials with an unyielding
commitment to environmental responsibility. In autumn
2008, marking significant success and expansion in Europe,
3Form opened its new Dutch based operation in Rotterdam,
with a dedicated production facility that serves the European
Design and Architecture community.
3form designs and produces highly decorative and
functional panels in three material platforms - 'Varia',
'Chroma' and 'Glass' that can be used as separation walls,
ceilings, sliding doors, table tops and bar counters or as a
design statement on walls and railings. All materials are
characterised by their beautiful decorative translucency,
design aesthetic, fabrication flexibility, and the strong
environmental and social commitment of the 3form
organisation in the design and manufacturing of its solutions.
The translucent materials can be applied to any design
project from hospitality, corporate, leisure and high-end retail
spaces. Panels can be fabricated in an unlimited number of
shapes and the 3form multidisciplinary architectural team
provides expertise and support throughout the design,
specification and installation process.
Stronger and lighter than glass and the most flexible of
the 3form platforms, 'Varia' panels provide the utmost in
translucent, aesthetic control, creating and fabricating
designs as diverse as the imagination. Made from Ecoresin,
created from PETG with 40% recycled material, Varia is the
ultimate custom material that beautifully blends high design
with low impact. The Autumn collections, entitled Nest and
Alchemy reflect the parallel design trends for natural and
metallic materials.
Available in a special palette of inspiring colours and made
from 100% cast acrylic, Chroma infuses a layer of colour
into the panel. Naturally or artificially illuminated, Chroma
has a radiant jewel-like colour and a remarkable luminosity.
3form Glass is a premium product with clear opacity and
outstanding depth. Interlayers of materials like sequins,
natural bubbles, willow, and flora and fauna can be delicately
suspended in the glass.
"High design, Low impact" describes 3form's corporate
commitment to environmental stewardship. 3form designs
products that are aesthetically refined, good for people and
kind to the environment and the company is committed to
increase the overall percentage of recycled content in its
materials. Sustainability is the core of the company's
corporate culture and is apparent in its products, processes
and business practices. 3Form was recently included on the
American Institute of Architects top 10 green building
products.
For more information:Tel: 020 7734 8103Email: [email protected] www.3form.eu
Kronospan has launched a fresh new set of
melamine decors for 2009. The collection has
been created following extensive research into the
market and designed to complement forthcoming
interior trends influencing both the private and
commercial sectors.
These are the first decors to be announced, with
more to be unveiled later in 2009. The initial four
are designed to suit a range of environments and
include a mix of bold new tropical decors alongside
some that offer a new slant on traditional favourites.
Samira Maple is a refreshed version of a favourite
decor, completing the Maple portfolio. Ideal for
bedroom, kitchen and office furniture, this new
option is designed to appeal to a wide market
within the commercial sector. The Samira Maple
very closely replicates the look of real timber,
incorporating accurate plank width and the full
knots which give a highly realistic finish. The decor
is a match to Cova Products’ Samira PA.
Miracosa Pear spans both the both domestic
and commercial sectors, breathing new life into a
familiar style. The Miracosa Pear’s subtle, warm
tones work well in kitchen, bedroom and bathroom
areas. Again, this decor is a very accurate
reproduction of the original timber and offers a
very elegant finish. Miracosa Pear matches LG
Nutrex’s u9701-RIB.
Walnut Lyon is a lighter alternative to the existing
Walnut Tiepolo and a match for Hornschuch’s Light
Dijon Walnut 4120006. Completing the Walnut
palette, the new decor is boldly linear, creating a
contemporary finish ideal for bedrooms and
kitchens. This new decor is flexible in use and can
either be used to produce a very subtle effect, or
alternatively can be specified to create a bigger
impact by running it horizontally with bold, slab
doors.
Sambesi Zebrano is Kronospan’s first tropical
based decor, designed predominantly for use in the
commercial sector, ideal for door fronts in hotels,
bars and restaurants. A true reproduction of
Zebrano veneer, the Sambesi Zebrano is an inviting,
powerful decor designed to complement strong,
contemporary colours such as matt grey work
surfaces or splashes of vivid lime green or Ferrari
red. Sambesi Zebrano matches with Cova Products’
Sambesi PA.
For more information:Tel: 01691 773361www.kronospan.co.uk
Alchemy and nature inspire 3form'sstunning material platforms
Kronospan Unveils Fresh NewCollection for 2009
Top: Varia Alchemy Collection – Wave GoldBottom: Varia Nest Collection – Thicket Raven
SambesiZebrano isKronospan’sfirst tropicalbased decor
10 Decorative & Solid Surfacing | January 2009
One of Britain’s foremost suppliers of modern surfacing and
edging materials, EDP, have made major strides forwards by
enhancing their service to customers.
Doubling both warehouse and transport capacity coincides with
new key staff appointments.
EDP’s Terry Willet says: “Working with our principal partners
in edging and surface foils we are introducing exciting new
colour ways and designs by consulting closely with our
customers and the major board producers. Pro-activity is what’s
required at this stage, and EDP will move forward in the
promotion of new product lines”
Five new (0.8 x 22mm) gloss edging decors have been
introduced to match Thermopal board decors: Light Olive Gloss
(F21/005); Black Gloss (U007); White Gloss; Cream Gloss
(U240); Latte/Oyster (u130/U197). Swatches of all the new
edging are available now from EDP.
EDP’s edgebanding supplier Probos also continues to update,
expand and innovate their range of Proadec edging products
and include them in their extremely popular Express Line range
and service.
Similarly major advances are being made with the Pentadecor
ranges of foils for membrane pressing. Exciting new decors being
introduced by EDP for Kronospan board décor matches include
Sambesi Zebrano (D8784); Samira Maple (D8783); Miracosa Pear
(D8898); Walnut Lyon (D9614).
Super matt and glossline decors are being developed to match
the latest vogue palette from Egger. These are four new intriguing
uni-colour foils: Mussel (U100ST9); Olive (U631ST9); Lava
(U741ST9); Dakar (U717ST9).
EDP say that all the stock range gloss and basicline foils in both
uni-colours and decors that they have introduced over recent
months continue to show strong popularity. In particular the
Woodline Mocha (matched to Egger H1428) and the Red Brown
Highland Oak (matched to Egger H3362) continue to enjoy high
use in current designs.
Terry Willett says that EDP plan to continue to develop their
supply infrastructure and work with their principal manufacturing
partners so that their customers receive a superior service both in
terms of supply and cutting edge product development.
For more information:Tel: 01702 618877Fax: 01702 618811Email: [email protected]
Duropal’s new UK worktop collection from Pfleiderer
Industrie demonstrates superior reproduction techniques.
This gives convincing granite, wood and solid surface effects in
genuine high pressure laminate. The most dramatic is Astral
Quartz with an enhanced high gloss surface for improved
abrasion resistance. The multi shade grey/silver chips against
a pitch black background will work well with many kitchens, a
cost effective yet practical choice for those who love the
granite look. This décor is also available in the ever popular TC
non gloss surface finish.
Sienna and Verona are two brown enhanced high gloss
granites with dramatic appeal. Again, Sienna is also offered in
the TC non gloss surface finish. Crystal stone in Quartz and
Castello Granite has a three dimensional appearance thanks
to the surface impression and finishing. Travertine and Brown
Sahara complete the new stone inspired additions.
Duropal’s single solid surface reproduction introduced in
2005 continues to be very popular so there are now three
new effects including white. Woods benefit from a dramatic
Japanese inspired ‘Ikebana’ and Light Tuscan Olive. For those
who require a more muted look, Natural Oak, Harvard Oak,
and Plum in block effects will fit the bill.
All new worktops are in the popular tight radius ‘Quadra’
edge profile including the 3 new gloss decors. Pfleiderer
Industrie is also now offering matching upstands in 4100mm
length for 42 decors from the worktop range, along with 19
decors in compact grade HPL back panels.
For more information:Tel: 01625 66410Email: [email protected]
EDP – Delivering Even More
Great impressions in Duropal’s latest worktops
Five newThermopal glossedging decorshave beenintroduced byEDF
Duropal’s plumbutcher blockeffect
January 2009 | Decorative & Solid Surfacing 11
IDS’s new Tuscan Quartzstone worksurface
range captures all the beauty of natural stone
yet offers the unique benefits of being available
off the shelf, lightweight and easy to install. As
a pre-fabricated blank, arguably the biggest
benefit is its excellent price advantage due to
reduced installation costs.
Tuscan Quartzstone worksurfaces are
surfaced in a 5mm engineered stone panel that
is 90% stone. It’s made from granites and
quartz and fused together to offer a truly
versatile sheet material. IDS has taken
advantage of this unique thin stone technology
to bring together a range of beautiful unique
stone worksurfaces that satisfy the trend for
natural materials. Signifying its premium
specification, the range is backed by a 10 year
limited warranty.
The range offers four contemporary stone
worksurfaces centred around a popular beige,
grey and black palette. Worktops are available
in 2900 x 620 x 38mm and breakfast bars
2100 x 900mm x 38mm. The product is also
suitable for a range of sink options including
flushmount and inset.
With Tuscan Quartzstone, the stone sheet
material is bonded to a moisture resistant core
and faced on the underside with a 0.7mm
laminate giving a superior quality finish and
specification. The great advantage of this is
the weight compared to granite or stone. This
makes for easier on-site handling and
installation with usual manpower, as well as
reducing the chance of breakage. Tuscan
Quartzstone can also be installed using
standard joinery tools with diamond-tipped
cutters that are available as installation kits
from IDS.
Says Andy Sutton, IDS Business
Development Director:
“Tuscan Quartzstone opens up the design
potential and availability of an aspirational
product to a wider audience. As an off the shelf
ready-made blank, much like a conventional
laminate worktop, Tuscan Quartzstone rings in
with a definite price advantage for the
consumer, as well as excellent margin
opportunity for the retailer.”
Tuscan Quartzstone worktops have been
designed so that any competent kitchen fitter,
following the comprehensive installation
instructions, will be able to install these
worktops with a high standard of finish.
IDS has set up a Gold Standard Fabricator
Network who will be fully trained in the product
and method of fabrication. Promotional
material includes a 12 page lifestyle brochure,
display stand with sample blocks, a
comprehensive Installation Kit and Care &
Maintenance guidelines.
Tuscan Quartzstone worksurfaces are
available on 48 hour delivery from all ten IDS
branches.
For more information:Tel: 08457 298 298Email: [email protected] www.idsurfaces.co.uk
A Class Act on the Worktop Scene
IDS’s Tuscan Quartzstone worksurface in matrix
While HI-MACS® is generally defined within
the descriptive boundaries of a “solid surface”
material it is, in fact, a Natural Acrylic Stone as
distinct from a Solid Surface. This is mainly
because of the way it is composed and
manufactured and offers designers, fabricators
and users a number of important benefits
which set it apart from, and in front of, general
solid surface materials.
Primarily HI-MACS® is a thermal-cured
surface as opposed to the more conventional
chemically-cured solid surface. Thermal curing
brings important benefits:
• Thermal curing gives a slightly harder and
more stable surface which, in turn offers better
consistency
• The LG manufacturing process
achieves a greater translucent
depth. This is because thermo-
curing allows particles
to be more evenly
distributed
throughout the material whereas chemically
cured surfaces tend to only get particle
distribution in the top third of the surface.
• The thermo-curing manufacturing process
has allowed the introduction of the superb
Volcanics collection which incorporates
significantly larger particles with stunning
depth translucency
• Because thermal curing gives a harder
surface it is more resistant to scratching and
easier to work and fabricate
• It is totally non-porous and light scratches
can be removed with a light abrasive like a
Scotchbrite pad. Deeper scratches can be
removed by sanding. Should some marks
persist they are easily removed with brand-
named products like Bar Keeper’s Friend™
HI-MACS® is the leading material with which
to work and design. It is supplied with a
protective coating that need only be removed
after the sheet has been worked on CNC
machines.
The material is also supplied in 6mm and
9mm sheets as standard. These sheets are for
use in any situation where the application does
not involve heat – so vertical surfaces, wet
surfaces in showers etc.
HI-MACS is suitable for high traffic
environments such as airport terminals, hotels,
shops, bars and restaurants, as well as
specialized healthcare, laboratory and
industrial installations. It is also a natural
choice for kitchens and bathrooms.
The formable properties of HI-MACS® for
creating complex 3D elements are exceptional.
This includes being able to create colour-
matched sinks to worktops. The material allows
joints with a full seamless effect to be made.
All of these properties make HI-MACS®
today’s and tomorrow’s advanced, hi-tech
surface for designing and hi performance use.
For more informationTel: 01732 424240
www.lghimacs.eu
Benefits of HI-MACS®
A selection of HI-MACS® colours and effects from the HI-MACS® display ‘briefcase’ used by retailers
The stunning Volcanic rangeincludes this Santa Ana texture