DECKEL MAHO DMU 80 T - maschinen-kistner.de...Tool clamping Tool changer system Pick-up Magazin...
Transcript of DECKEL MAHO DMU 80 T - maschinen-kistner.de...Tool clamping Tool changer system Pick-up Magazin...
-
KISTNER GmbH & Co. KG
Industriestraße 7-9 D-95349 Thurnau
Tel. (+49) 9228 987-0 [email protected] www.maschinen-kistner.de
DECKEL MAHO DMU 80 T
mailto:[email protected]:[email protected]:[email protected]://www.maschinen-kistner.de/http://www.maschinen-kistner.de/http://www.maschinen-kistner.de/
-
LIST OF CONTENTS
Machine info …………………………………………………….……………………………..………………………………….…………..…..………. Equipment ……………………………………………………………………………………………………..……………………………………….……… Technical data …………………………………………………………………………………..……………………………..………..….…………. Transport data and floor plan ………………………………………………………………….………………….……….
3 4 5 8
DECKEL MAHO DMU 80 T | | 2
-
2
MACHINE INFO
| 3
Manufacturer
Type
Year of manufacture
Control
Machine number
Travels
Spindle hours
NC swivel milling head
Motor spindle
40% DC 100% DC
DECKEL MAHO DMU 80 T |
-
Tool holder Tool clamping Tool changer system Pick-up Magazin places SK 40 3D control Language control NC rotary table integrated into rigid table
1x T-slot 14 H7 10x T-slot 14 H12
Distance of the T-slots
permissible load Controlled NC swivel milling head Electronic hand wheel Attachment plate for integrated NC rotary table
Height
permissible load Infrared probe Mode 4 Extended manual intervention Spiral chip conveyor
Cleaning gun with pump (theor. Pump capacity) Tool holder User guide / Documentation Machine parameters on CD
| 4
EQUIPMENT
DECKEL MAHO DMU 80 T |
-
| 5
TECHNICAL DATA
Measuring system Resolution X-, Y-, Z axis
Input resolution X-, Y-, Z axis Work area X axis
Y axis
Z axis Working spindle SK Tool holder
Tool clamping
Pull studs
DECKEL MAHO DMU 80 T |
-
| 6 DECKEL MAHO DMU 80 T |
Tool magazine Magazin places (2 x 16 places)
Max. tool-Ø (with all places occupied)
Magazine 1 Magazine 2
Max. tool lenght from spindle nose
Max. tool weight (with autom.tool changing)
Max. tool, total weight – in magazine Main drive 12.000 min-1 Motor spindle without gearbox
Torque on the spindle available, counting efficiency
Engine power on the spindle available
Spindle speed continuously programmable in setup mode
-
| 7 DECKEL MAHO DMU 80 T |
NC rotary table incorporated into rigid table Working surface
Centering bore
Number of T-slots / Size Clamping slots Aligning groove (middle)
Distance of T-slots
Holding of the revolving table top
Holding of the table top at 100%
at 60%
at 40%
at 25%
Lubrication
Drive (AC-Servo motor) Engine speed
Torque
Table speed
Table weight
-
TRANSPORT DATA and FLOOR PLAN
| 8 DECKEL MAHO DMU 80 T |
Transport weight Machine with lifting accesories
Weight of the soil Transport dimensions (L x W x H) approx. Machine
Machine with support for tranportation
-
| 9 DECKEL MAHO DMU 80 T |
- - - Space requirement E Mains connection P Pneumatic connection
-
Thank you very much for your interest
*We do not guarantee the accuracy and completeness of these documents. We further do not assure any characteristics and qualities. The named machine, which is up for sale, is used.*
Diapositiva numero 1Diapositiva numero 2Diapositiva numero 3Diapositiva numero 4Diapositiva numero 5Diapositiva numero 6Diapositiva numero 7Diapositiva numero 8Diapositiva numero 9Diapositiva numero 10