De La Vega Exam1f32013

6
Exam 1 form 3 1- Five high precision pH measurements of gastric juices are carried out and the following values are obtained. Sample number pH Concentration of H + 1 1.655 0.0221 2 1.607 0.0247 3 1.601 0.0251 4 1.625 0.0237 5 1.702 0.0199 Use the Q test and Grubbs test to determine if any outlier should be thrown out. (show your work) 2- Calculate the 90% and 99% confidence limits for the determination of lead in glazed pottery. Sample number ppm lead 1 0.100 2 0.110 3 0.120 4 0.150 5 0.127 3- Calculate the purity (as % Na 2 CO 3 ) of a 500 mg sample which required 18.25 mL of 0.1750 M HCl solution for complete neutralization. First determine the reaction which is occurring in the analysis.

description

CHEM

Transcript of De La Vega Exam1f32013

Page 1: De La Vega Exam1f32013

Exam 1 form 3

1- Five high precision pH measurements of gastric juices are carried out and the following values are obtained. Sample number

pH Concentration of H+

1 1.655 0.0221 2 1.607 0.0247 3 1.601 0.0251 4 1.625 0.0237 5 1.702 0.0199 Use the Q test and Grubbs test to determine if any outlier should be thrown out. (show your work) 2- Calculate the 90% and 99% confidence limits for the determination of lead in glazed pottery. Sample number

ppm lead

1 0.100 2 0.110 3 0.120 4 0.150 5 0.127 3- Calculate the purity (as % Na2CO3) of a 500 mg sample which required 18.25 mL of 0.1750 M HCl solution for complete neutralization. First determine the reaction which is occurring in the analysis.

Page 2: De La Vega Exam1f32013

First ExaminationIntroduction to Analytical Chemistry                                                                                                                 R.Lopez de la VegaBubble in the form number in the section entitled Grade or Educ in the scantron.

MULTIPLE CHOICE.  Choose the one alternative that best completes the statement or answers the question.

1) A 1.00 L sample of water contains 0.0036 g of Cl⁻ ions.  Determine the concentration ofchloride ions in ppm if the density of the solution is 1.00 g/mL.A) 1.8 ppm B) 7.2 ppm C) 2.8 ppm D) 3.6 ppm E) 5.4 ppm

1)

2) Determine the molality of a solution prepared by dissolving 0.500 moles of CaF2 in 11.5 molesH2O.A) 4.35 m B) 4.14 m C) 5.31 m D) 2.41 m E) 1.88 m

2)

3) The following number has how many significant figures, 20.020?

A) 3 B) 6 C) 5 D) 4 E) 2

3)

4) Identify the weakest acid.A) HClB) HBrC) HID) HFE) not enough information is available

4)

5) What is the interval where the population average may be found with a 95% confidencefor the following sample data collected: 20.0, 21.0, 22.0, 20, 24, 22, 23.   (df means degreesof freedom)(t-value at 95% Confidence 3 df = 3.182, 4 df = 2.776, 5df = 2.571, 6df =2.447, 7 df=2.365)A) 21.7 (± 6.4%)B) (19.0 to 24.0)C) 23.1 (± 1.383)D) more information is needed to solve this problemE) Choose this answer only if none of the above are correct.

5)

6) All analytical instruments have some level of variability that we associate with thefollowing statements, except:

A) Normal distributionB) Determinate errorC) Bell shape curveD) Gaussian distributionE) Choose this answer only if none of the above are correct.

6)

7) Calculate the molality of a solution formed by dissolving 27.8 g of LiI in 500.0 mL of water.A) 0.415 m B) 0.241 m C) 0.254 m D) 0.556 m E) 0.394 m

7)

C‐1

lopezdel
Typewritten Text
Form 3
Page 3: De La Vega Exam1f32013

8) How can you reduce the range of a confidence interval?A) increase varianceB) increase outliersC) decrease nD) increase nE) Choose this answer only if none of the above answers are correct.

8)

9) In the standardization of a of a HCl solution versus KHP (potassium Hydrogen Phathallate), a technician failed to dry the KHP completely. Did this error cause his reportedconcentration of hydrochloric acid to be too high, too low, or correct?A) too lowB) too highC) correctD) Choose this answer if more information is neededE) Choose this answer only if none of the above answers would be correct.

9)

10) Sampling is considered one of the most critical parts of an analysis because:A) the laboratory sample must be representative of the bulk sampleB) results obtained from a compromised sample may be erroneousC) results are only as reliable as the laboratory sampleD) more than one of the above is correctE) none of the above are correct.

10)

11) According to the following reaction, what volume of 0.244 M KCl solution is required to reactexactly with 50.0 mL of 0.210 M Pb(NO3)2 solution?

2 KCl(aq) + Pb(NO3)2 (aq) → PbCl2(s) + 2 KNO3(aq)

A) 58.1 mL B) 86.1 mL C) 116 mL D) 97.4 mL E) 43.0 mL

11)

12) Which of the following are considered acceptable in analytical chemistry?A) random errorB) gross errorC) determinate errorD) more than one of the above is considered acceptableE) It is necesary to remove all of the above in order to carry out an analysis properlay.

12)

13) Accuracy is best exemplified by which of the following statments?A) The closeness of the values to the accepted or true valueB) The median of the set of measurementsC) The mode of a set of measurementsD) The closeness of repeated valuesE) All of the above are correct.

13)

C‐2

lopezdel
Typewritten Text
Form 3
Page 4: De La Vega Exam1f32013

14) Identify HCl.A) strong electrolyte, weak acidB) weak electrolyte, weak acidC) weak electrolyte, strong acidD) nonelectrolyteE) strong electrolyte, strong acid

14)

15) A moon rock must be sampled.  It is composed of 3 substances which are distributed in such away that pockets of substance A are seen to predominae on the outside of the rock whilesubstances B and C predominate on the inside of the rock.  This rock would be considered:A) homogeneousB) segregated homogeneousC) random heterogeneousD) segregated heterogeneousE) Choose this answer only if none of the above answers are correct.

15)

16) Which of the following would most likely be designated as TD?A) A volumetric flaskB) A transfer pipetteC) A buretD) More than one of the above would be designated as TDE) None of the above would be designated as TD.

16)

17) Calculate the propagation of error in the following calculation:

20.0 (± 3.0%) + 20.0 (± 10.0%) =

A) Not enough information is provided to answer this question properly.B) 40.0 (± 5%)C) 40 (± 5%)D) 40.0 (± 1%)E) Choose this answer only if none of the above answers are correct.

17)

18) Give the net ionic equation for the reaction (if any) that occurs when aqueous solutions ofAl(C2H3O2)3 and LiNO3 are mixed.A) Al3+(aq) + 3 NO3-(aq)  →  Al(NO3)3(s)B) Al3+(aq) + 3 NO3-(aq) + Li+(aq) + C2H3O2-(aq)  →  Al(NO3)3(aq) + LiC2H3O2(s)C) 3 Li+(aq) + (C2H3O2)33-(aq) → Li3(C2H3O2)3 (s)D) Li+(aq) + C2H3O2-(aq) → LiC2H3O2(s)E) No reaction occurs.

18)

19) Which of the following is a STRONG acid?A) NH4+B) H2OC) C6H5CO2HD) HClO4E) HCN

19)

C‐3

lopezdel
Typewritten Text
Form 3
Page 5: De La Vega Exam1f32013

20) What is the concentration of nitrate ions in a 0.125 M Mg(NO3)2 solution?A) 0.250 M B) 0.375 M C) 0.0625 M D) 0.160 M E) 0.125 M

20)

21) Precision is best exemplified by the following statement(s):A) The closeness of repeated valuesB) The closeness of the values to the accepted or true valueC) The median of the set of measurementsD) All of the aboveE) Do not choose this answer

21)

22) What precipitate is most likely formed from a solution containing Ba+2, Na+1, OH-1, andCO3-2.A) NaOH B) Ba(OH)2 C) BaCO3 D) Na2CO3

22)

23) A solution is prepared by dissolving 49.3 g of KBr in enough water to form 473 mL of solution.Calculate the mass % of KBr in the solution if the density is 1.12 g/mL.A) 10.4% B) 8.57% C) 10.1% D) 11.7% E) 9.31%

23)

C‐4

lopezdel
Typewritten Text
Form 3
Page 6: De La Vega Exam1f32013

Answer KeyTestname: QUANT EXAM 1

1) D2) D3) B4) D5) No Correct Answer Was Provided.6) B7) A8) D9) No Correct Answer Was Provided.10) A11) B12) A13) A14) E15) D16) D17) C18) E19) D20) A21) A22) C23) E

C‐5