db HR40 · 2020-07-14 · 60 40 75 INSTALLATION INSTRUCTIONS db HR40 CONTINUED >>> 1 Cut the...
Transcript of db HR40 · 2020-07-14 · 60 40 75 INSTALLATION INSTRUCTIONS db HR40 CONTINUED >>> 1 Cut the...
Company Registration No. 04187742 VAT Registraion No. 212 1628 11 ISO 9001Registered Firm CHAS Accredited
Protecting against life’s little knocks
PRODUCT DATASHEET
SDS Protection Limited | Wyck Crossroads | Binsted Road | ALTON HANTS | GU34 4NTT: 01420 543222 | F: 01420 543355 | [email protected] | www.sdsprotection.co.uk
Sheet samples are available on request t: 01420 543222
60
40
75
durablend™ one piece cover
Bracket
Return-to-wall endcaps and external corners available for this profile
MED
IUM
DU
TY
db HR40
durablend™ standard colour chart
snowflake mushroom buttermilk china midnight
jade aqua gunpowder cobble flint
Due to the limitations of the printing process, actual colours may vary slightly from swatches shown. For an accurate colour match please ask SDS Protection for samples.
0416
60
40
75
INSTALLATION INSTRUCTIONS
db HR40
CONTINUED >>>
1
Cut the aluminium rail to the correct length allowing for an endcap at either end.
Company Registration No. 04187742 VAT Registraion No. 212 1628 11 ISO 9001Registered Firm CHAS Accredited
Protecting against life’s little knocks
SDS Protection Limited | Wyck Crossroads | Binsted Road | ALTON HANTS | GU34 4NTT: 01420 543222 | F: 01420 543355 | [email protected] | www.sdsprotection.co.uk
MED
IUM
DU
TY
End cap
Bracket
durablend™ cover
2
Screw the mounting brackets to the aluminium retainer – starting 100mm from either end and not exceeding 800mm centres.
100mm
100mm
800mm centres max
0416
INSTALLATION INSTRUCTIONS
4
Company Registration No. 04187742 VAT Registraion No. 212 1628 11 ISO 9001Registered Firm CHAS Accredited
Protecting against life’s little knocks
SDS Protection Limited | Wyck Crossroads | Binsted Road | ALTON HANTS | GU34 4NTT: 01420 543222 | F: 01420 543355 | [email protected] | www.sdsprotection.co.uk
Attach the endcaps to either end of the aluminium rail and fix with self-tapping screws.
CONTINUED >>>
3
Fix brackets to the wall using construction approved fixings making sure the brackets are level.
db HR40
0416
INSTALLATION INSTRUCTIONS
5
6
Company Registration No. 04187742 VAT Registraion No. 212 1628 11 ISO 9001Registered Firm CHAS Accredited
Protecting against life’s little knocks
SDS Protection Limited | Wyck Crossroads | Binsted Road | ALTON HANTS | GU34 4NTT: 01420 543222 | F: 01420 543355 | [email protected] | www.sdsprotection.co.uk
Measure between the endcaps and cut the cover to size. Clip the cover onto the aluminium rail profile and the covers onto the brackets.
Clean finished HR40 profile with SDS Protection durablend™ approved cleaner.
db HR40
0416