Db en Profisafe Sdk 106857 en 00

2
© PHOENI X CONTACT 2015 -11- 03 106857_en_00 PROFISAFE SDK Data sheet 1 Description Safety-related automation devices with PROFINET interface require a certified safety layer. PROFIsafe is the communication profile for functional safety applications based on PROFINET. PROFIsafe can be used in safety- related applications up to SIL 3/SIL CL 3 according to IEC 61508/ IEC 62061, safet y cate gory 4 or PL e according to IS O 13849 -1. Phoenix Contact provides the PROFIsafe F-Host/F-Device layer as ANSI C source code. The source code is certified and protected against manipulation using a CRC check- sum. Features Cer tif ied a cco rdi ng to P ROF Isa fe speci ficati on 2. 61 Ind epe ndent of h ard ware an d op eratin g sy stem PROFIs afe C RC ca lcu lat ion usi ng a l ook up t abl e or formula Tra nsi tio n T9 o f the F-Host s tat e mac hin e sup por ted 2 Scope of delivery PROFIs af e F- Host ( ANSI C source code); library: CRC-protected PROFIsafe F-Device (ANSI C s our ce code); library: CRC-protected PROFIsafe h eader ( ANSI C s ou rce code) Samples (ANSI C sour ce code) Templates for an exemplary F-Host Templates for an exemplary F-Device Documentation PROFIsaf e F- Host i ntegrati on guide PROFIsaf e F-Device int eg rati on guide Make sure you always use the latest documentation. It can be downloaded at phoenixcontact-software.com . PROFIsafe Software Development Kits for F-Host and F-Device

Transcript of Db en Profisafe Sdk 106857 en 00

Page 1: Db en Profisafe Sdk 106857 en 00

8/18/2019 Db en Profisafe Sdk 106857 en 00

http://slidepdf.com/reader/full/db-en-profisafe-sdk-106857-en-00 1/2

© PHOENIX CONTACT 2015-11-03106857_en_00

PROFISAFE SDK

Data sheet

1 Description

Safety-related automation devices with PROFINET

interface require a certified safety layer. PROFIsafe is thecommunication profile for functional safety applications

based on PROFINET. PROFIsafe can be used in safety-

related applications up to SIL 3/SIL CL 3 according to

IEC 61508/IEC 62061, safety category 4 or PL e according

to ISO 13849-1.

Phoenix Contact provides the PROFIsafe F-Host/F-Device

layer as ANSI C source code. The source code is certified

and protected against manipulation using a CRC check-

sum.

Features

– Certified according to PROFIsafe specification 2.61

– Independent of hardware and operating system

– PROFIsafe CRC calculation using a lookup table or

formula

– Transition T9 of the F-Host state machine supported

2 Scope of delivery

– PROFIsafe F-Host (ANSI C source code);

library: CRC-protected– PROFIsafe F-Device (ANSI C source code);

library: CRC-protected

– PROFIsafe header (ANSI C source code)

– Samples (ANSI C source code)

– Templates for an exemplary F-Host

– Templates for an exemplary F-Device

– Documentation

– PROFIsafe F-Host integration guide

– PROFIsafe F-Device integration guide

Make sure you always use the latest documentation.

It can be downloaded at phoenixcontact-software.com.

PROFIsafe Software Development Kits for F-Hostand F-Device

Page 2: Db en Profisafe Sdk 106857 en 00

8/18/2019 Db en Profisafe Sdk 106857 en 00

http://slidepdf.com/reader/full/db-en-profisafe-sdk-106857-en-00 2/2

PROFISAFE SDK

106857_en_00 2 / 2PHOENIX CONTACT GmbH & Co. KG • Flachsmarktstraße 8 • 32825 Blomberg • Germanyphoenixcontact.com

3 Technical data

PROFIsafe

F-Host functionality using PROFINET According to PROFIsafe specification 2.61 and IEC 61784-3-3 profile part,F-Host

F-Device functionality using PROFINET According to PROFIsafe specification 2.61 and IEC 61784-3-3 profile part,F-Device

General requirements

Development process The development process for safety-related automation devices needs to beconfigured according to the rules of IEC 61508, EN 62061, andEN ISO 13849.

Hardware platform Using a two-channel system, the PROFIsafe layer must be implemented oneach channel and executed during runtime.

PROFINET interface The PROFINET interface used is based on certified technology componentsfrom Phoenix Contact.

System time base 1 ms

Available products

PROFIsafe Software Development KitPROFIsafe V2.6 F-Host SDK 1.0 PROFIsafe layer F-Host for implementation in safety-related PROFINETcontrollers

PROFIsafe V2.6 F-Device SDK 1.0 PROFIsafe layer F-Device for implementation in safety-related PROFINETdevices

Additional PROFINET technology components

PROFINET Software Development Toolkits (software stacks) – PROFINET SDK Controller

– PROFINET SDK Device

PROFINET device interface – Single chip device interface TPS-1

– TPS-1 Development Toolkit

Configuration software PROFINET Configurator