Data Sheet TETWI300E 190110 - Taison€¦ · Taison Lighting, The Focus Centre, Ingleby Road,...
Transcript of Data Sheet TETWI300E 190110 - Taison€¦ · Taison Lighting, The Focus Centre, Ingleby Road,...
Product data sheetTAISON
Product Codes
Material and Finish
LED Characteristics
Electrical Input
Ÿ Injection moulded polycarbonate
TETWI300E
LED chip type
Life expectancy
Board lumens
Rated input voltage
Rated input frequency
Charging time
Weight
KG
Dimensions
LED
1.5 kg
TETWI300EEmergency Range / Twinsopt
Ÿ LED indicator light and push button test switch.
IP
65LED
warranty
on-site
2RoHSCOMPLIANT
3 Hrs
296 75
27
2
Rated power
Taison Lighting, The Focus Centre, Ingleby Road, Bradford, BD7 2AT
Tel: 01274 521550 www.taisonlighting.com
This product specification contains data based on typical performance at nominal power. Actual values stated may depend on the drive OR ballast and its application. Data is compiled by performing tests carried out in a controlled environment and is a representation of relative performance at the relevant nominal voltage. Actual performance figures can vary depending on operating conditions. NOTE: Data is subject to change without any prior notice.
20,000 hrs
300lm
6W
~230-240V AC
50-60Hz
24 hrs (initial charge 36 hrs)
300lm6W
Battery charging current 150~180mA
400~600mABattery discharging current
SMD
Operation temperature -20 to +45°C
No. of LED 30
Ÿ Suitable for wall mounting.
Ÿ Emergency operation time > 3h