D03, DO5 and D08 MANIFOLDS
Transcript of D03, DO5 and D08 MANIFOLDS
Manifolds
D03, D05, D08
Parallel & Series
Se
ct
io
n
9
D03, D05, D08
Cover Plates
D05, D08
Valve Adapters
D03, D05, D08
Subplates
D03 Bar ManifoldsD03 Bar Manifolds
Specifications:
Valve mounting is #10-24 UNC on NPTF and SAE manifolds.P & T: 1/2" NPTF or -10 SAE.A & B: 3/8" NPTF or -8 SAE.Gauge port is included on NPTF and SAE two station and longer manifolds. It is 1/4" NPTF or -6 SAE.Mounting kit includes 2 steel mounting brackets, eight 0.31-18 hex head screws, and 8 washers. Gauge port plug included if applicable.
1 thru 16 station lengths availablePressure Rating: Aluminum: 3000 PSI.
9-16 station manifolds are non-stock. Consult MP Filtri for delivery.
D03 Parallel Circuit Manifold
9-1
No. of StationsNo. of Stations 0101 0202 0303 0404 0505 0606 0707 0808
"A" Length (2" spa)
Weight in lb. 2"
"A" Length (4" spa)
Weight in lb. 4"
2.13
3
--
--
6.38
6
10.13
9
10.63
9
18.13
15
14.88
12
26.13
22
4.25
4
6.13
6
8.50
8
14.13
12
12.75
11
22.13
19
17.00
14
30.13
25
Options Available:
Relief valve cavities may be machined for Compact Controls, Delta, Fluid Controls, Hydraforce, Modular Controls, Parker, or Sun valves.Manifolds may be machined with isolations in the P and/or T ports.A two-station sandwich module is available that connects the A and B ports respectively of the two stations. Consult MP Filtri for part number and pricing.High Flow and Ductile Iron manifolds available
Ordering Information
D03 Parallel Circuit Manifolds
0101PPAA 22 PP /S/SD03D03
A /C
/S
/P*
/T*
P
S
2
4
D03
P
6061-T6 Aluminum
Pressure IsolationPA...PJ avail. 2.13"PA...PF avail. 4.00"
Tank IsolationTA...TJ avail. 2.13"TA...TF avail. 4.00"
Relief CavityCommon Cavity
Relief CavitySun Cavity
NPTF1/2" NPTF P&T3/8" NPTF A&B1/4" NPTF GA
SAESAE -10 P&TSAE -8 A&BSAE -6 GA
2.13"
4.00"
NFPA D03Valve pattern
Parallel
MATERIAL OPTIONS
PORT THREADS
NUMBER OF STATIONS
VALVE SPACING
Centre to Centre
SERIES
MANIFOLD CIRCUIT
01...16
02...08 Available withspacing code 4
Available withspacing code 2
* Not available on 01 Station Parallel Omit if not required.
Parallel Circuit
9-2
High Flow and Ductile Iron manifoldsavailable consult MP Filtri
D03 Bar ManifoldsD03 Bar Manifolds
D03 Series Circuit Manifold
International Directional Valve Interface Size Cross Reference:NFPA (USA): Old size:D01
New size:D03ISO-4401: Size: 03CETOP-R35H: Size: 3NG: Size: 6
Specifications:
2 thru 4 station lengths availablePressure Rating: Aluminum: 3000 PSIValve mounting is #10-24 UNC on NPTF and SAE manifolds.P & T: 1/2" NPTF or -10 SAE.A & B: 3/8" NPTF or -8 SAE.Gauge port is included on NPTF and SAE manifolds. It is 0.25-18 NPTF or -6 SAE.Mounting kit includes 2 steel mounting brackets, eight 0.31-18 hex head screws, and 8 washers. Gauge port plug included if applicable.
Options Available:
Relief valve cavities may be machined for Compact Controls, Delta, Fluid Controls, Hydraforce, Modular Controls, Parker, or Sun valves.A two-station adaptor is available that connects the A and B ports respectively of the two stations. Consult MP Filtri for part number and pricing.High Flow and Ductile Iron manifolds available
No. of StationsNo. of Stations 0202 0303 0404
"A" Length (2" spa)
Weight in lb. 2"
"A" Length (4" spa)
Weight in lb. 4"
4.25
4
6.13
6
8.50
8
14.13
12
6.38
6
10.13
9
9-3
Ordering Information
D03 Series Circuit Manifolds
0101SSAA 22 PP /S/SD03D03
A /C
/S
P
S
2
4
D03
S
6061-T6 AluminumRelief Cavity
Common Cavity
Relief CavitySun Cavity
NPTF1/2" NPTF P&T3/8" NPTF A&B1/4" NPTF GA
SAESAE -10 P&TSAE -8 A&BSAE -6 GA
2.13"
4.00"
NFPA D03Valve pattern
Series
MATERIAL OPTIONS
PORT THREADS
NUMBER OF STATIONS
VALVE SPACING
Centre to Centre
SERIES
MANIFOLD CIRCUIT
02...05
02...04 Available withspacing code 4
Available withspacing code 2
Omit if not required.
Series Circuit
High Flow and Ductile Iron manifoldsavailable consult MP Filtri
9-4
8-21 station manifolds are non-stock. Consult MP Filtri for delivery.
D05 Bar ManifoldsD05 Bar Manifolds
Specifications:
1 thru 21 station lengths availablePressure Rating: Aluminum: 3000 PSIValve mounting is 0.25-20 UNC on NPTF and SAE manifolds.P & T: 3/4" NPTF or -12 SAE.A & B: 1/2" NPTF or -8 SAE.Gauge port is included on NPTF and SAE two station and longer manifolds. It is 1/4" NPTF or -6 SAE.Mounting kit includes 2 steel mounting brackets, eight 5/16-18 hex head screws, and 8 washers. Gauge port plug included if applicable.
D05 Parallel Circuit Manifold
Options Available:
Relief valve cavities may be machined for Compact Controls, Delta, Fluid Controls, Hydraforce, Modular Controls, Parker, or Sun valves.Manifolds may be machined with isolations in the P and/or T ports.A two-station sandwich module is available that connects the A and B ports respectively of the two stations. Consult MP Filtri for part number and pricing.High Flow and Ductile Iron manifolds available
No. of StationsNo. of Stations 02020101 0303 0404 0505 0606 08080707 0909 1010 1111 1212 1313 1414
"A" Length (3" spa)
Weight in lb. 3"
"A" Length (5" spa)
Weight in lb. 5"
3.25
6.50
--
--
9.75
11
13.25
15
16.25
17
23.25
25
22.75
24
33.25
35
--
--
43.25
46
--
--
48.25
50
--
--
53.25
55
--
--
58.25
60
--
--
63.25
65
--
--
68.25
71
6.50
8
8.25
9
13.00
14
8.25
20
19.50
21
28.25
30
26.00
27
38.25
41
9-5
Ordering Information
D05 Parallel Circuit Manifolds
0101PPAA 33 PP /S/SD05D05
A /C
/S
/P*
/T*
P
S
3
5
D05
P
6061-T6 Aluminum
Pressure IsolationPA...PJ avail. 3.25"PA...PF avail. 5.00"
Tank IsolationTA...TJ avail. 3.25"TA...TF avail. 5.00"
Relief CavityCommon Cavity
Relief CavitySun Cavity
NPTF3/4" NPTF P&T1/2" NPTF A&B1/4" NPTF GA
SAESAE -12 P&TSAE -8 A&BSAE -6 GA
3.25"
5.00"
NFPA D05Valve pattern
Parallel
MATERIAL OPTIONS
PORT THREADSNUMBER OF STATIONS
VALVE SPACING
Centre to Centre
SERIES
MANIFOLD CIRCUIT
01...21
02...14 Available withspacing code 5
Available withspacing code 3
* Not available on 01 Station Parallel Omit if not required.
Parallel Circuit
High Flow and Ductile Iron manifoldsavailable consult MP Filtri
9-6
D05 Bar ManifoldsD05 Bar Manifolds
D05 Series Circuit Manifold
International Directional Valve Interface Size Cross Reference:NFPA (USA): Old size:D02
New size:D05ISO-4401: Size: 05CETOP-R35H: Size: 5NG: Size: 10
Specifications:
2 thru 4 station lengths availablePressure Rating: Aluminum: 3000 PSIValve mounting is 0.25-20 UNC on NPTF and SAE manifolds.P & T: 3/4" NPTF or -12 SAE.A & B: 1-4" NPTF or -8 SAE.Gauge port is included on NPTF and SAE two station and longer manifolds. It is 1/2" NPTF or -6 SAE.Mounting kit includes 2 steel mounting brackets, eight 5/16-18 hex head screws, and 8 washers. Gauge port plug included if applicable.
Options Available:
A two-station adaptor is available that connects the A and B ports respectively of the two stations. Consult MP Filtri for part number & pricing.High Flow and Ductile Iron manifolds available
No. of StationsNo. of Stations 0202 0303 0404
"A" Length (3" spa)
Weight in lb. 3"
"A" Length (5" spa)
Weight in lb. 5"
6.50
8
8.25
9
13.00
14
18.25
20
9.75
11
13.25
15
04 stations are non-stock. Consult MP Filtri for delivery.
9-7
Ordering Information
D05 Series Circuit Manifolds
0101SSAA 33 PP /S/SD05D05
A /C
/S
P
S
3
5
D05
S
6061-T6 AluminumRelief Cavity
Common Cavity
Relief CavitySun Cavity
3.25"
5.00"
NFPA D05Valve pattern
Series
MATERIAL OPTIONS
PORT THREADS
NUMBER OF STATIONS
VALVE SPACING
Centre to Centre
SERIES
MANIFOLD CIRCUIT
02...04
02...04 Available withspacing code 5
Available withspacing code 5
Available in two stations onlyOmit if not required.
Series Circuit
NPTF3/4" NPTF P&T1/2" NPTF A&B1/4" NPTF GA
SAESAE -12 P&TSAE -8 A&BSAE -6 GA
High Flow and Ductile Iron manifoldsavailable consult MP Filtri
9-8
D08 Bar ManifoldsD08 Bar Manifolds
Specifications:
1 thru 7 station lengths availablePressure Rating: Aluminum: 3000 PSIValve mounting is 0.50-13 UNC on NPTF and SAE manifolds.P, A&B: 1" NPTF or -16 SAE.T: 1-1/4" NPTF or -20 SAE.Y: 3/8" NPTF or -6 SAE.Gauge port is included on NPTF and SAE two station and longer manifolds. It is 1/4" NPTF or -6 SAE.Mounting kit includes 2 steel mounting brackets, 8 hex head screws, and 8 washers. Gauge port plug included if applicable.
D08 Parallel Circuit Manifold
Options Available:
Relief valve cavities may be machined for Compact Controls, Delta, Fluid Controls, Hydraforce, Modular Controls, Parker, or Sun valves.Manifolds may be machined with isolations in the P and/or T ports. X Ports may be machined into standard manifold.A two-station sandwich module is available that connects the A and B ports respectively of the two stations. Consult MP Filtri for part number and pricing.High Flow and Ductile Iron manifolds available
No. of StationsNo. of Stations 02020101 0303 0404 0505 0606 0707
"A" Length (5" spa)
Weight in lb. 5"
"A" Length (7" spa)
Weight in lb. 7"
5.25
12
--
--
15.75
35
19.25
44
26.25
61
33.25
74
36.75
89
--
--
10.50
24
12.25
28
21.00
49
26.25
64
31.50
75
--
--
Important Note:
X & Y Data:The Y port is standard. The X port is not included unless ordered as an option.
9-9
Ordering Information
D08 Parallel Circuit Manifolds
0101PPAA 55 PP /S/SD08D08
A /C
/S
/P*
/T*
P
S
5
7
D08
P
6061-T6 Aluminum
Pressure IsolationPA...PG avail. 5.25"PA...PD avail. 7.00"
Tank IsolationTA...TF avail. 5.25"TA...TD avail. 7.00"
Relief CavityCommon Cavity
Relief CavitySun Cavity
5.25"
7.00"
NFPA D08Valve pattern
Parallel
MATERIAL OPTIONS
PORT THREADS
NUMBER OF STATIONS
VALVE SPACING
Centre to Centre
SERIES
MANIFOLD CIRCUIT
01...07
02...05 Available withspacing code 5
Available withspacing code 3
* Not available on 01 Station Parallel Omit if not required.
Parallel Circuit
NPTF1" NPTF P,A,B1-1/4" NPTF T3/8" NPTF Y
1/4" NPTF X&GA
SAESAE -16 P,A,B
SAE -20 TSAE -8 YSAE -4 XSAE -6GA
High Flow and Ductile Iron manifoldsavailable consult MP Filtri
9-10
D08 Bar ManifoldsD08 Bar Manifolds
D08 Series Circuit Manifold
International Directional Valve Interface Size Cross Reference:NFPA (USA): Old size:D06
New size:D08ISO-4401: Size: 08CETOP-R35H: Size: 8NG: Size: 25
Specifications:
2 thru 3 station lengths availablePressure Rating: Aluminum: 3000 PSIValve mounting is 0.50-13 UNC on NPTF and SAE manifolds.P, A&B: 1" NPTF or -16 SAE.T: 1-1/4" NPTF or -20 SAE.X&Y: 3/8" NPTF or -6 SAE.Gauge port is included on NPTF and SAE two station and longer manifolds. It is 1/4" NPTF or -6 SAE.Mounting kit includes 2 steel mounting brackets, eight 5/16"-18 hex head screws, and 8 washers. Gauge port plug included if applicable.
No. of StationsNo. of Stations 0202 0303
"A" Length (5" spa)
Weight in lb.
"A" Length (7" spa)
Weight in lb.
10.50
37
12.25
51
15.75
51
19.25
63
High Flow and Ductile Iron manifoldsavailable consult MP Filtri
9-11
Ordering Information
D08 Series Circuit Manifolds
0202SSAA 55 PPD08D08
AP
S
5
7
D08
S
6061-T6 Aluminum
5.25"
7.00"
NFPA D08Valve pattern
Series
MATERIAL PORT THREADS
NUMBER OF STATIONS
VALVE SPACING
Centre to Centre
SERIES
MANIFOLD CIRCUIT
02...03
02...03 Available withspacing code 7
Available withspacing code 5
Series Circuit
NPTF1" NPTF P,A,B1-1/4" NPTF T3/8" NPTF Y
1/4" NPTF X&GA
SAESAE -16 P,A,B
SAE -20 TSAE -8 YSAE -4 XSAE -6GA
High Flow and Ductile Iron manifoldsavailable consult MP Filtri
9-12
D03 Cover PlatesD03 Cover Plates
Pressure Rating: Aluminum: 3000 PSIFour #10-24 x 0.88 long cap screws, one
spring pin, and four viton "O"-rings are
included.
Pressure Rating: Aluminum: 3000 PSIFour #10-24 x 0.88 long cap screws, one
spring pin, and four viton "O"-rings are
included.
Pressure Rating: Aluminum: 3000 PSIFour #10-24 x 0.88 long cap screws, one
spring pin, one pipe plug and four viton "O"-
rings are included.
Pressure Rating: Aluminum: 3000 PSIFour #10-24 x 0.88 long cap screws, one
spring pin, and four viton "O"-rings are
included.
Ordering Information D03 Cover Plates
International Directional Valve Interface Size Cross Reference:NFPA (USA): Old size:D01, New size:D03ISO-4401: Size: 03CETOP-R35H: Size: 3NG: Size: 6
CPPCPP G*G*AA D03D03
A 6061-T6 Aluminum
MATERIAL
D03
G*
NFPA D03 Valve pattern
1/4" NPTF
SERIES
GAUGE PORT
CPP
CPS
COP* Available with parallel circuit
only.
Omit if not required
Parallel Circuit
Series circuit
PLATE TYPE
Crossover Circuit CoverPlate (P to A, B to T)
D03 Parallel Circuit Cover Plate
D03 Parallel Circuit Cover Plate
With Gauge Port
D03 Series Circuit Cover Plate
D03 Crossover Circuit Cover Plate
9-13
D05 Cover PlatesD05 Cover Plates
Pressure Rating: Aluminum: 3000 PSIFour 1/4"-20 x 0.75 long cap screws, and
five viton "O"-rings are included.
Pressure Rating: Aluminum: 3000 PSIFour 1/4"-20 x 1.25 long cap screws,
and five viton "O"-rings are included.
Pressure Rating: Aluminum: 3000 PSI one
pipe plug and five viton "O"-rings are
Four 1/4"-20 x 0.75 long cap screws,
included.
Pressure Rating: Aluminum: 3000 PSIFour 1/4"-20 x 1.50 long cap screws,
and five viton "O"-rings are included.
Ordering Information D05 Cover Plates
International Directional Valve Interface Size Cross Reference:NFPA (USA): Old size:D02, New size:D05ISO-4401: Size: 05CETOP-R35H: Size: 5NG: Size: 10
D05 Parallel Circuit Cover Plate
D05 Parallel Circuit Cover Plate
With Gauge Port
D05 Series Circuit Cover Plate
D05 Crossover Circuit Cover Plate
CPPCPP G*G*AA D05D05
A 6061-T6 Aluminum
MATERIAL
D05
G*
NFPA D05 Valve pattern
1/4"-18 NPTF
SERIES
GAUGE PORT
CPP
CPS
COP* Available with parallel circuit
only.
Omit if not required
Parallel Circuit
Series circuit
PLATE TYPE
Crossover Circuit CoverPlate (P to A, B to T)
9-14
D08 Cover PlatesD08 Cover Plates
Pressure Rating: Aluminum: 3000 PSISix -13 x 1.50 long cap screws, two
spring pins, and six viton "O"-rings are
1/2"
included.
Pressure Rating: Aluminum: 3000 PSISix 1/2"-13 x 2.25 long cap screws, two
spring pins, and six viton "O"-rings are
included.
Pressure Rating: Aluminum: 3000 PSI
two spring pins, one pipe plug and six
viton "O"-rings are
Six 1/2"-13 x 1.50 long long cap screws,
included.
Pressure Rating: Aluminum: 3000 PSISix 1/2"-13 x 2.50 long cap screws, two
spring pins, and five viton "O"-rings are
included.
Ordering Information D08 Cover Plates
International Directional Valve Interface Size Cross Reference:NFPA (USA): Old size:D06
New size:D08ISO-4401: Size: 08CETOP-R35H: Size: 8NG: Size: 25
D08 Parallel Circuit Cover Plate
D08 Parallel Circuit Cover Plate
With Gauge Port
D08 Series Circuit Cover Plate
D08 Crossover Circuit Cover Plate
CPPCPP G*G*AA D08D08
A 6061-T6 Aluminum
MATERIAL
D08
G*
NFPA D08 Valve pattern
1/4"-18 NPTF
SERIES
GAUGE PORT
CPP
CPS
COP* Available with parallel circuit
only.
Omit if not required
Parallel Circuit
Series circuit
PLATE TYPE
Crossover Circuit CoverPlate (P to A, B to T)
9-15
Pressure Rating: Aluminum: 3000 PSIValve Mounting: UNC #10-24 x 0.44 DP.Five 014 viton "O"-rings, 4 UNC 1/4"-20 x 3/4"
long SHCS mounting screws are included.
This adaptor permits the installation of a D03
valve on a D05 manifold. This adaptor, while
low in cost, does not orient the A&B ports on
the manifold to the respective valve solenoids.
Adapt D03 Valve to D05
Manifold - BA Oriented
D05 Valve AdaptorsD05 Valve Adaptors
Pressure Rating: Aluminum: 3000 PSIValve Mounting: UNC #10-20 x 0.50 DP.Five 014 viton "O"-rings, 4 UNC 1/4"-20 x 1-
1/4" long SHCS mounting screws are included.
This adaptor permits the installation of a D03
valve on a D05 manifold. This adaptor
properly orients the A&B ports on the
manifold to the respective valve solenoids.
Adapt D03 Valve to D05
Manifold - AB Oriented
Ordering Information D05 Valve Adaptors
D03D03 D05D05AA VAVA ABAB
A D05
D03
6061-T6 Aluminum D05 Manifold pattern
D03 Valve pattern
MATERIAL MANIFOLD PATTERN
VALVE PATTERN
International Directional Valve Interface Size Cross Reference:NFPA (USA): Old size:D02,
New size:D05ISO-4401: Size: 05CETOP-R35H: Size: 5NG: Size: 10
AB
BA
Av common to AmBv common to Bm
Bv common to AmAv common to Bm
PORT ORIENTATION
9-16
D08 Valve AdaptorsD08 Valve Adaptors
Pressure Rating: Aluminum: 3000 PSISix 1/2"-13 x 1.50 long cap screws,
two spring pins, and six viton "O"-
rings are included.
Pressure Rating: Aluminum: 3000 PSISix 1/2"-13 x 1.50 long cap screws,
two spring pins, and six viton "O"-
rings are included.
Adapt D03 Valve to D08 Manifold
Ordering Information D08 Valve Adaptors
Adapt D05 Valve to D08 Manifold
International Directional Valve Interface Size Cross Reference:NFPA (USA): Old size:D06
New size:D08ISO-4401: Size: 08CETOP-R35H: Size: 8NG: Size: 25
D05D05AA D08D08 VAVA ABAB
A
D03
D05
6061-T6 Aluminum
D03 Valve pattern
D05 Valve pattern
MATERIAL
VALVE PATTERN
ABAv common to AmBv common to Bm
PORT ORIENTATION
D05 D05 Manifold pattern
MANIFOLD PATTERN
9-17
D03 SubplatesD03 Subplates
D03 Side & Back Ported Subplates
Ordering Information D03 Subplates
Pressure Rating: Aluminum: 3000 PSITwo 1/4"-20 x 0.88 long cap screws are included.Valve mounting is #10-24 UNC on NPTF & SAE subplates.
International Directional Valve Interface Size Cross Reference:NFPA (USA): Old size:D01, New size:D03ISO-4401: Size: 03CETOP-R35H: Size: 3NG: Size: 6
SeriesSeries
SeriesSeries
SeriesSeries
AA
AA
GG
DD
DD
JJ
BB
BB
HH
EE GG
EE
KK
CC
CC
II
FF HH
FF
D03 SP S 4P
D03 SP S 6*
D03 SP S 8*
D03 SP B 4P
D03 SP B 6*
D03 SP B 8*
D03 SP B 4P
D03 SP B 6*
D03 SP B 8*
1.00
1.00
1.50
1.00
1.00
1.50
0.66
0.59
0.69
1.25
1.25
1.78
0.88
0.88
1.38
0.75
0.69
0.75
2.50
2.50
3.50
2.50
2.50
3.50
1.28
1.28
1.78
0.50
0.50
0.75
2.25
2.25
3.25
0.25
0.25
0.25
1.88
1.94
2.81
1.31
1.31
1.81
1.31
1.31
1.81
1.91
1.97
2.81
0.25
0.25
0.25
0.88
0.88
1.38
2.25
2.25
3.25
SSAA 4P4PD03D03 SPSP
A
MATERIAL
D03 NFPA D03 Valve pattern
SERIES
SP Subplate
PLATE TYPE
S
B
PORT LOCATION
4P
6P
6S
8P
8S
1/4" NPTF
3/8" NPTF
-6 SAE
1/2" NPTF
-8 SAE
PORT THREADS
Side Ported
Back Ported
6061-T6 Aluminum
SIDE PORTED
BACK PORTED
Back Ported:
Side Ported:
9-18
D03 SubplatesD03 Subplates
D03 Dual Ported Subplate
Specifications:
Pressure Rating: Aluminum: 3000 PSI
Two1/4"-20 x 1.50 long cap screws are included.
Valve mounting is #10-24 UNC on NPTF & SAE subplates.
Pressure and tank connections may be brought in either the side or back. Two plugs are included to
block unused ports.
The back-located pressure and tank ports are machined to allow plugs to be installed flush.
Ordering Information D03 Dual Ported Subplate
D03D03 SPSPAA SBSB 6P6P
A
D03
SP
6061-T6 Aluminum
NFPA D03Valve Pattern
Subplate
MATERIAL
VALVE PATTERN
VALVE PATTERN
SB Side P,A,B,T portsBack P&T
6P
6S
3/8" NPTF
-6 SAE
PORT THREAD
VALVE PATTERN
International Directional Valve Interface Size Cross Reference:NFPA (USA): Old size:D01, New size:D03ISO-4401: Size: 03CETOP-R35H: Size: 3NG: Size: 6
0.84
1.50
1.781.00
3.44
2.25
3.19
2.50
1.34
0.250.47 0.47
1.34
3.19 3.19
1.25
2.69
1.34
0.91
9-19
6P
6S
3/8" NPTF
-6 SAE
PORT THREAD
D03 Dual Ported Subplate With Relief Cavity
The 'common' cavity is
machined to specs. for the
following manufacturers'
cavities:
Compact Controls: CP10-2
Delta: 8500-1000
Fluid Controls: SC-316
Hydraforce: VC-10-2
Modular Controls: C-10-2
Parker: C-10-2
Sun relief valves are
available but must be
ordered separately.
The Sun cavity is machined
to specs. for cavity T-10A
Pressure flows into the nose
of the cavity. Tank flow is
out the side.
Ordering Information
D03 Dual Ported Subplate With Relief Cavity
D03D03 SPSPAA RVRV 6P6PCC
A
C
S
D03
SP
RV
6061-T6 Aluminum
Common cavity
Sun T-10A cavity
NFPA D03Valve Pattern
Subplate
MATERIAL
RELIEF VALVE CAVITY
VALVE PATTERN
VALVE PATTERN
PORTING
Dual portedwith relief cavity
2.25
3.00
0.84
0.88
0.97
2.00
0.31
0.31
2.69
1.63
0.88
1.532.37
0.692.00
0.97
1.692.69
3.00
1.66
1.66
0.692.00
9-20
D05 SubplatesD05 Subplates
D05 Side & Back Ported Subplates
Ordering Information D05 Subplates
Pressure Rating: Aluminum: 3000 PSI
Two 3/8"-16 x 1.25 long cap screws are
included.
Valve mounting is 1/4"-20 UNC on NPTF &
SAE subplates.
SSAA 6P6PD05D05 SPSP
A
MATERIAL
D05 NFPA D05 Valve pattern
SERIES
SP Subplate
PLATE TYPE
S
B
PORT LOCATION
6P
8P
8S
3/8" NPTF
1/2" NPTF
-8 SAE
PORT THREADS
Side Ported
Back Ported
6061-T6 Aluminum
SIDE PORTED
BACK PORTED
International Directional Valve Interface Size Cross Reference:NFPA (USA): Old size:D02, New size:D05ISO-4401: Size: 05CETOP-R35H: Size: 5NG: Size: 10
9-21
D05 SubplatesD05 Subplates
D05 Dual Ported Subplate
Specifications:
Pressure Rating: Aluminum: 3000 PSI
Two 3/8"-16 x 1.50 long cap screws are included.
Valve mounting is 1/4"-20 UNC on NPTF & SAE subplates.
Pressure and tank connections may be brought in either the side or back. Two plugs are included to
block unused ports.
The back-located pressure and tank ports are machined to allow plugs to be installed flush.
Ordering Information D05 Dual Ported Subplate
D05D05 SPSPAA SBSB 8P8P
A
D05
SP SB
6061-T6 Aluminum
NFPA D05Valve Pattern
Subplate Dual ported
MATERIAL
8P
8S
1/2" NPTF
-8 SAE
PORT THREAD
VALVE PATTERN
VALVE PATTERNVALVE PATTERN
International Directional Valve Interface Size Cross Reference:NFPA (USA): Old size:D02, New size:D05ISO-4401: Size: 05CETOP-R35H: Size: 5NG: Size: 10
9-22
D05 Dual Ported Subplate With Relief Cavity
The 'common' cavity is
machined to specs. for the
following manufacturers'
cavities:
Compact Controls: CP10-2
Delta: 8500-1000
Fluid Controls: SC-316
Hydraforce: VC-10-2
Modular Controls: C-10-2
Parker: C-10-2
Sun relief valves are
available but must be
ordered separately.
The Sun cavity is machined
to specs. for cavity T-10A
Pressure flows into the nose
of the cavity. Tank flow is
out the side.
Ordering Information
D05 Dual Ported Subplate With Relief Cavity
D05D05 SPSPAA RVRV 8P8PCC
A
C
S
8P
8S
D05
SPRV
6061-T6 Aluminum
Common cavity
Sun T-10A cavity
1/2"-14 NPTF
-8 SAE
NFPA D05Valve Pattern
SubplateDual ported
with relief cavity
MATERIAL
RELIEF VALVE CAVITY
PORT THREAD
VALVE PATTERN
VALVE PATTERNPORTING
9-23
D08 SubplatesD08 Subplates
D08 Side Ported Subplate
Pressure Rating:
Aluminum: 3000 PSI
Two 1/2"-13 x 1.75 long
cap screws are included.
Valve mounting is
1/2"-13UNC on NPTF &
SAE subplates.
Ordering Information D08 Side Ported Subplate
D08D08 SPSPAA 16P16POOSS
A
D08
6061-T6 Aluminum
NFPA D08Valve Pattern
MATERIAL
VALVE PATTERN
12P
16P
16S
20P
20S
PORT THREAD
3/4" NPTF P,T,A,B1/4" NPTF X & Y1" NPTF P,T,A,B1/4" NPTF X & Y-16 SAE P,T,A,B-6 SAE X & Y
1-1/4" NPTF P,T,A,B1/4" NPTF X & Y
-20 SAE ISO 11926-6 SAE X & Y
O Side Tank Port
VALVE PATTERN
International Directional Valve Interface Size Cross Reference:NFPA (USA): Old size:D06
New size:D08ISO-4401: Size: 08CETOP-R35H: Size: 8NG: Size: 25
SeriesSeries AA BB CC DD GG LL OOEE JJHH MM PPFF KK NNII
D08SPSO16*
D08SPSO20*
2.00
3.00
6.13
6.50
4.50
5.00
1.19
1.31
2.53
2.33
4.53
4.77
1.00
1.13
1.00
2.38
0.50
0.50
3.53
3.72
5.62
6.00
1.59
1.73
2.25
2.50
3.59
4.17
3.38
3.63
4.94
5.19
VALVE PATTERNPLATE TYPE
SP Subplate
PORT LOCATION
S Side Ported
9-24
D08 SubplatesD08 Subplates
D08 Back Ported Subplate
Pressure Rating:
Aluminum: 3000 PSI,
Two 1/2"-13 x 1.50 long
cap screws are included.
Ordering Information D08 Back Ported Subplate
D08D08 SPSPAA 16P16PBB
A
D08
SP
6061-T6 Aluminum
NFPA D08Valve Pattern
Subplate
MATERIAL
VALVE PATTERN
VALVE PATTERN
12P
16P
16S
20P
20S
PORT THREAD
3/4" NPTF P,T,A,B1/4" NPTF X & Y1" NPTF P,T,A,B1/4" NPTF X & Y-16 SAE P,T,A,B-6 SAE X & Y1-1/4" NPTF
1/4" NPTF X & Y-20SAE
-6 SAE X & Y
B Back Ported
PORT LOCATION
International Directional Valve Interface Size Cross Reference:NFPA (USA): Old size:D06
New size:D08ISO-4401: Size: 08CETOP-R35H: Size: 8NG: Size: 25
SeriesSeries AA BB CC DD GG LL PPEE JJ NNHH MM QQ RR SS TT UUFF KK OOII
D08SPB16*
D08SPB20*
1.50
2.00
6.13
7.63
4.63
5.00
0.50
0.38
3.53
4.28
5.62
7.25
2.31
0.38
3.44
3.63
--
4.63
1.19
1.44
1.19
1.75
3.44
3.25
3.44
3.56
1.66
1.84
4.94
6.00
1.19
1.63
2.59
3.31
3.53
4.31
4.47
5.78
1.25
1.44
3.38
3.56
9-25
D08 SubplatesD08 Subplates
D08 Side Ported Subplate With Back Tank Port
Pressure Rating:
Aluminum: 3000 PSI,
Ductile Iron: 5000 PSI
Two 1/2"-13 x 1.75 long
socket head cap screws
are included
The tank port is always
1" NPTF.
This subplate with ports
other than NPTF or SAE
is a custom product
D08D08 SPSPAA 16P16PTTSS
A
D08
SP
6061-T6 Aluminum
NFPA D08Valve Pattern
Subplate
MATERIAL
VALVE PATTERN
VALVE PATTERN
16P
16S
PORT THREAD
1" NPTF P,T,A,B1/4" NPTF X & Y-16 SAE P,T,A,B-6 SAE X & Y
S Side Ported
PORT LOCATION
T Back Tank Portalways 1"
NPTF
VALVE PATTERN
Ordering Information
D08 Side Ported Subplate With Back Tank Port
PORT LOCATION
International Directional Valve Interface Size Cross Reference:NFPA (USA): Old size:D06
New size:D08ISO-4401: Size: 08CETOP-R35H: Size: 8NG: Size: 25
1.503.44
2.31
0.503.53
7.25
4.63
3.44
2.31
1.66
4.941.19
2.59
3.44
3.44
3.44
1.19
1.196.13
9-26
D08 Dual Ported Subplate With Relief Cavity
The 'common' cavity is
machined to specs. for the
following manufacturers'
cavities:
Compact Controls: CP10-2
Delta: 8500-1000
Fluid Controls: SC-316
Hydraforce: VC-10-2
Modular Controls: C-10-2
Parker: C-10-2
Sun relief valves are
available but must be
ordered separately.
The Sun cavity is machined
to specs. for cavity T-3A
Pressure flows into the nose
of the cavity. Tank flow is
out the side.
Ordering Information
D08 Dual Ported Subplate With Relief Cavity
D08D08 SPSPAA RVRV 16P16PCC
A 16P
16S
D08
SP RV
6061-T6 Aluminum
NFPA D08Valve Pattern
SubplateDual ported
with relief cavity
MATERIAL PORT THREAD
VALVE PATTERN
VALVE PATTERN VALVE PATTERN
1" NPTF P,T,A,B1/4" NPTF X & Y-16 SAE P,T,A,B-6 SAE X & Y
C
S
Common cavity
Sun T-3A cavity
RELIEF VALVE CAVITY
CIRCUITPLATE TYPE
BOTTOM MOUNTING HOLES, SIZE 20 PORTS ONLYUNC 0.50-13 x 1.19 DP FOR 20P AND 20S
SeriesSeries
SeriesSeries
AA
NN
BB
OO
CC
PP
DD
GG
UU
LLEE
RR
JJ
ZZ
HH
WW
MMFF
TT
KK
AAAA
II
YY
D08SPRVC16*
D08SPRVS16*
D08SPRVC16*
D08SPRVS16*
3
3
1.47
1.47
6
6
3.59
3.59
4.5
4.5
5.09
5.09
0.91
0.91
1.87
1.87
1.87
1.87
2.47
2.81
1.68
1.68
1.87
1.87
3.5
3.5
2.56
2.56
2.41
2.41
1.87
1.87
3.47
3.47
5.56
5.56
4.53
4.53
1.25
1.87
3.38
3.38
3.59
3.59
1.25
1.25
0.44
0.44
9-27