Czech vocational projects – engineering and plastic industries by Requalification Centre Opava.

Czech vocational projects – engineering and plastic industries by Requalification Centre Opava

„RETRAIN YOUR EMPLOYEES IN OUR CENTRE or

SELECT FROM OUR SUCCESSFUL GRADUATES!“

1.

2.

3.

EU Projects of Requalification Centre Opava

Requalification Centre for Multidemensional ProcessingProject 1

Within this project the „Requalification Centre for Multidemensional Processing“ was established. The retraining pilot course „OPERATOR AND PROGRAMMER OF CNC MACHINES” have taken place there.

Budget: 125 716 EURExecution of project: 2005 – 2006Grant Programme: PHARE 2003, Human Recourses Development

Requalification Centre for Multidemensional ProcessingProject 1

PROJECT OUTPUTS» 3 rounds of the course» 62 people were retrained» 55 successful graduates» 43 people were given job after graduation

Precision Machining Retraining Centre (PMRC)Project 2

PMRC represents an educational project under which the „PROGRAMMING AND OPERATION OF CNC MACHINES” retraining course takes place. The course concerns the programming and operation of multi-dimensional 3D and 5D machines used in automotive and aerospace precision engineering.

Budget: 5 944 535 CZKExecution of project: 2006 - 2008Grant Programme: European Social Fund (OP RLZ)

Precision Machining Retraining Centre (PMRC)Project 2

PROJECT OUTPUTS» 5 rounds of the course» 76 people were retrained» 61 successful graduates» 47 people were given job after graduation

PMRC II is a project, under which the following retraining courses have taken place:

PROGRAMMING AND OPERATION OF CNC MACHINES

CNC PROGRAMMING AND OPERATION INSTRUCTORS

Key idea of the project: to create convenient, compact and functioning methodology focused on instructor training.

Precision Machining Retraining Centre II (PMRC II)Project 3

Budget: 5 482 530 CZKExecution of project: 2006 - 2008Grant Programme: European Social Fund (OP RLZ)

Precision Machining Retraining Centre II (PMRC II)Project 3

PROJECT OUTPUTS» 12 instructors were retrained» 12 successful graduates

Requalification Centre in OpavaVideo

Presentation name 10

Requalification Centre in OpavaVideo

Projects of Training centres

1.

2.

3.

COPRECI Training Centre4.

Building-up the Training Centre in KBA-Grafitec

ABOUT PROJECTBudget: 21 230 000 CZK

Execution of project: 2008 - 2011

Grant Programme: European Social Fund (OPPI – Training Centres)

Aim of the project: to provide high-quality backround for management and

implementation of human recourses development activities within the company.

Training Centre in KBA-Grafitec

ABOUT COMPANYKoenig & Bauer AG is a German multinational - the

second largest printing presses producer in the world. KBA employs more than 7000 employees, primarily in Germany and the U.S.A. In 2004, company's turnover reached 1.423 billion Euro.

Training Centre in KBA-Grafitec

Specifics of Training centre:» building capacity: 112 seats» utilization: 77 %» 4 classrooms (50 seats)» Hands-on training centre (6 work places)» Auditorium (56 seats)» barier free entrance» lift, outside circular stair» parking area (19 pull-in)» changing rooms, toilet facilities» kitchenette

Building-up the Training Centre in KBA-Grafitec

Training Centre in IVAX Pharmaceuticals



Grant Programme: European Social Fund (OPPI – Training Centres)



Training Centre in IVAX

ABOUT COMPANYIVAX Pharmaceuticals s.r.o., originally known as Galena, is an

important traditional producer of pharmaceuticals. Trhe products are exported to many countries of the world including the USA and Western Europe. The company successful operation is accomplished by approximately 850 employees. In 2006 the company became a part of the multinational group TEVA.


Specifics of Training centre:» building capacity: 78 seats» utilization: 74 %» 2x classrooms (40 seats)» 1x computer classrom (18 seats)» Hands-on training centre (4 work places)» Laboratory (16 seats)» changing rooms, toilet facilities» kitchenette


LINASET Training Centre



Grant Programme: European Social Fund (OPPP – Training Centres)




ABOUT COMPANYLinaset is a producer of thermosetting plastics through direct

pressing, transfer and injection molding. Linaset offers a comprehensive service starting with the

development of molding, through working out of drawing documentation and production of mold to deliveries of individual moldings and/or finished parts. Company employs more than 550 employees.



Specifics of Training centre:» building capacity: 20 seats» utilization: 78 %» classroom (20 seats)» Hands-on training centre» changing rooms, toilet facilities» kitchenette

CORPECI Training Centre



Grant Programme: European Social Fund (OPPP – Training Centres)



COPRECI Training Centre

ABOUT COMPANYCOPRECI has been producing and supplying components for the

household appliance sector since 1963.COPRECI is part of Mondragón Corporación Cooperatiova (MCC),

the foremost business group in the Basque Country and seventh in the ranking of Spain´s largest businesses.

COPRECI CZ employs more than 200 employees.

CORPECI Training Centre

COPRECI Training Centre

Specifics of Training centre:» building capacity: 72 seats» utilization: 75 %» 2 classrooms (72 seats)» changing rooms, toilet facilities» kitchenette

děkuje za pozornost

DC VISION, s.r.o. – Krnovská 58 – 746 01 Opava www.dcvision.cz tel/fax +420 553 654 816 e-mail [email protected]

Contact PersonLibor Witassektel/fax +420 123 456 789 e-mail [email protected]

DC VISION, s.r.o. – ZIRKON Office Center – Sokolovská 84-86 – 186 00 Prague - Karlín www.dcvision.cz tel/fax +420 e-mail [email protected]

Czech vocational projects – engineering and plastic industries by Requalification Centre Opava.

Documents

Transcript of Czech vocational projects – engineering and plastic industries by Requalification Centre Opava.