Cylindrical PC Dripper - Metzer · Spacing between Drippers (m) 0.20 0.30 0.40 0.50 1.00 2.00 3.00...

ADI

Features• The ultimate cylindrical PC dripper for agriculture• Everlasting reliability• Unique and accurate pressure-compensating labyrinth

mechanism• Wide water passages with turbulent flow pattern• Large Inlet filter area – Up to 10 times larger than any

other dripper• Dual inlet filter for various water sources • Excellentforeffluentreuse• Highly clog-resistant• Wide compensation range – up to 4.3 bars

RootGuard® configuration is available for extra protection against root intrusion in SDI systems.

Technical DataDripper flow rates: 1.6 / 2.2 / 3.5 l/h

Dripline diameters: 16 / 18 / 20 mm

Dripline wall thickness: 0.9-1.25 mm

Applications» Row crops» Orchards » Landscaping» Vegetables» Gardening

Cylindrical PC Dripper

Unique PC MechanismUnique and accurate pressure-compensating labyrinth mechanism

Landscaping

Row crops Orchards

Applications

Self-FlushingPC Labyrinth

Chemical-ResistantSilicon Diaphragm

Dripper Cover

The Ultimate Cylindrical PC Dripper for Agriculture

Dual Large Clog-Resistant Inlet Filterfor Low Quality Water

Primary Labyrinth

Primary Labyrinth with Wide Water Passages

ADI Dripline - Technical Data

Packaging Data

Model Coil Length (m)*

Number of Coils per Container

20’ 40’ 40’ HC

ADI 16 400 150 300 326

ADI 20 300 133 266 300

ModelInside

Diameter (mm)

Wall Thickness

(mm)

Min. Working Pressure

(bar)

Max. Working Pressure

(bar) Kd

ADI 16 13.80.9

0.8 4.3 0.95-1.121.15

ADI 20 17.41.0

0.8 4.3 0.6-0.851.25

www.metzer-group.com Kibbutz Metzer, M.P Hefer 3882000, Israel

+972 4 6387001 +972 4 6385385 [email protected] Adi E

n 10

16Metzerplas reserves the right to redesign/modify its products and change the information in this document at any time without prior notice and without incurring any responsibility or liability for errors published here.

ADI 16 Max. Lateral Length (ID 13.8 mm, WT 0.9 mm, Inlet Pressure 3.5 bar)

Nominal Flow Rate (l/h)

Spacing between Drippers (m)

0.20 0.30 0.40 0.50 0.60 0.75 1.00

1.6 100 143 183 221 256 306 382

2.2 84 120 154 185 213 254 316

3.5 59 85 110 132 153 183 230

ADI 20 Max. Lateral Length (ID 17.4 mm, WT 1.0 mm, Inlet Pressure 2.5 bar)

Nominal Flow Rate (l/h)


0.20 0.30 0.40 0.50 0.60 0.75 1.00

1.6 149 214 274 329 382 456 569

2.1 136 193 245 293 338 401 496

» On flat ground» Representative tables only. For further information, please refer to the Irrimetzer software.

* Available also in coil length shorter than 400m

ASSIF

Features• Especially designed for SDI applications• Anti-siphon system - prevents suction of sand or soil into the dripper• Wide range of working pressures for various topographies• Unique and accurate regulating labyrinth mechanism• Wide water passages along the labyrinth• Suitablefordifferentwatersources• Long-lasting silicon diaphragm• Durable under harsh field conditions and chemical applications


Unique Anti-Siphon System Anti-siphon system - prevents suction of sand or soil into the dripper

Anti-Siphon PC Dripper

Technical DataDripper flow rates: 0.8 / 1.2 / 1.6 / 2.1 / 3.4 l/h

Dripline diameters: 16 / 17 / 20 / 22 / 25 mm

Dripline wall thickness: 0.4 - 1.2 mm

Applications» Row crops» Orchards» Turf and landscaping » Vegetables» Sugarcane» Alfalfa» Industrial crops

Large Inlet Filter with Anti-Siphon Barrier

Chemical-Resistant Silicon Diaphragm

Self-Flushing PC Labyrinth

Primary Labyrinth


Landscaping

Row crops Orchards

Applications

ASSIF Dripline - Technical Data

ModelInside

Diameter(mm)

Wall Thickness

(mm)


(bar)


(bar)Kd

ASSIF 16

15.8 0.4

0.8

2.00.2

15.2 0.6 2.5

13.8 0.9-1 3.5 0.27

ASSIF 1715.8 0.6

0.82.5

0.215.0 0.9-1 3.5

ASSIF 20 17.4 0.9-1.2 0.8 3.5-4.3 0.1

ASSIF 22 21 0.4-1.0 0.8 3.5 0.08

ASSIF 25 24.7 0.4-1.0 0.8 3.5 0.05

Assi

f En

1016

Packaging Data


+972 4 6387001 +972 4 6385385 [email protected]

ModelWall

Thickness (mm)

Coil/Drum Length (m) Number of Coils/Drums*

per Container

20’ 40’ 40’ HC

ASSIF 16

0.4 1000 Narrow 360 720 880

0.6 <20cm spacing – 600 WideOther spacing – - 800 Wide 240 480 580

0.9 500 Wide

1.15 400 Coil 170 340 375

ASSIF 17

0.6 20cm spacing – 600 WideOther spacing – 800 Wide

240 480 580

240 480 5800.9 500 Wide

1.15 400 Coil 170 340 375

ASSIF 200.9 400 Coil 125 150 180

1.2 300 Coil 140 280 300

ASSIF 22 1.00 350 Wide 240 480 580

ASSIF 25 1.00 300 Wide 240 480 580

* Number of drums per pallet: Wide - 24, Narrow - 36

ASSIF 20 Max. Lateral Length (ID 17.4 mm, WT 1.0 mm, Inlet Pressure 2.5 bar)

Nominal Flow Rate (l/h) Spacing between Drippers (m)

0.20 0.30 0.40 0.50 0.60 0.75 1.00

0.8 278 364 439 508 571 659 793

1.2 231 302 365 422 475 549 660

1.6 192 251 304 351 395 456 549

2.1 161 211 255 295 332 384 462

3.4 118 155 187 217 244 282 340

ASSIF 16 Max. Lateral Length (ID 15.2 mm, WT 0.6 mm, Inlet Pressure 2.5 (bar)


0.20 0.30 0.40 0.50 0.60 0.75 1.00

0.8 206 275 336 391 442 512 619

1.2 171 228 279 325 367 426 515

1.6 142 189 232 270 305 354 429

2.1 119 159 194 227 256 297 360

3.4 87 116 142 166 188 219 265

ASSIF 17 Max. Lateral Length (ID 15.8 mm, WT 0.6 mm, Inlet Pressure 2.5 bar)


0.20 0.30 0.40 0.50 0.60 0.75 1.00

0.8 219 293 358 417 471 546 661

1.2 181 243 297 346 391 455 550

1.6 150 201 247 288 325 378 4582.1 126 169 207 242 273 318 385

3.4 92 124 152 177 201 233 283

ASSIF 25 Max. Lateral Length (I.D 24.7 mm, W.T 1.0 mm, Inlet Pressure 2.5 bar)


0.20 0.30 0.40 0.50 0.60 0.75 1.00

0.8 524 678 815 940 1055 1215 1460

1.2 435 564 678 782 878 1011 1215

1.6 361 469 564 650 730 842 1011

2.1 303 394 474 456 614 708 850

3.4 222 289 348 401 451 520 625

Metzerplas reserves the right to redesign/modify its products and change the information in this document at any time without prior notice and without incurring any responsibility or liability for errors published here.


GALI

Features• Highly reliable dripper• Unique and accurate regulating labyrinth mechanism• Wide water passages along the labyrinth• Self-flushing operation at the beginning and at the end of each irrigation cycle• Compact multi-optional button dripper• Accommodates 1, 2, and 4 outlet adapters

Online PC/PCND Dripper

Technical DataDripper flow rates:2.05 l/h 4.0 l/h (available soon)

Suitable for 12-32 mm tubes

Non-drain option:Shut down pressure: 2 m

Applications» Greenhouses and nurseries» Orchards» Landscaping» Gardening» Vegetables» Hydroponics / Soilless culture

Greenhouses

Landscaping

Orchards

Applications

Primary Cylindrical Labyrinth with Wide Water Passages


Non-Drain Option Non-drain system: The dripline remains full of water during irrigation intervals, ensuring immediate and uniform irrigation along the dripline.

PC Labyrinth

Self-FlushingPC Labyrinth

GALI 2.05 l/h - Max. Lateral Length (m)


+972 4 6387001 +972 4 6385385 [email protected]

PE Pipe 16 mm, ID 13.2 mm, (Kd 0.45)Inlet

Pressure (bar)


0.20 0.30 0.40 0.50 1.00 2.00 3.00

1.0 40 55 68 80 129 206 267

1.5 62 85 106 125 203 322 420

2.0 75 103 128 151 246 392 510

2.5 84 116 145 171 278 444 579

3.0 92 127 158 187 305 486 636

PE Pipe 25mm, ID 21.2 mm, (Kd 0.12)Inlet

Pressure (bar)


0.20 0.30 0.40 0.50 1.00 2.00 3.00

1.0 100 133 162 189 299 470 609

1.5 155 208 254 296 470 738 960

2.0 187 251 308 359 571 898 1167

2.5 211 284 348 407 648 1018 1323

3.0 231 311 382 446 711 1118 1452

PE Pipe 20 mm, ID 17 mm, (Kd 0.20)Inlet

Pressure (bar)


0.20 0.30 0.40 0.50 1.00 2.00 3.00

1.0 68 91 111 129 204 320 417

1.5 105 141 173 202 321 504 654

2.0 127 171 210 245 390 614 798

2.5 144 194 237 277 442 696 903

3.0 157 212 260 304 485 764 993

PE Pipe 32mm, ID 27.2 mm, (Kd 0.04)Inlet

Pressure (bar)


0.20 0.30 0.40 0.50 1.00 2.00 3.00

1.0 171 221 264 304 470 730 942

1.5 268 346 415 478 741 1150 1488

2.0 325 420 504 581 900 1398 1809

2.5 368 476 571 658 1022 1586 2052


1-Outlet Adapter 2-Outlet Adapter 4-Outlet Adapter

» Representative tables only. For further information, please refer to the Irrimetzer software.

Gali

En 1

016

IDIT

Features• High performance with a wide variety of crops• Extremely durable under harsh field conditions• Turbulent water flow pattern• Highly clog-resistant inlet filter - ensures clean and continuous flow• Suitablefordifferentwatersources• Excellentforeffluentreuse


Heavy-Duty Integral Dripper Extremely durable dripper with dual inlet filter for best clog-resistance

Cylindrical Dripper

Technical DataDripper flow rates: 1.4 / 2.3 / 3.1 / 4.3 / 10 l/h

Dripline diameter:16 mm

Dripline wall thickness: 0.9 and 1.15 mm

Applications» Row crops» Orchards » Landscaping» Vineyards» Vegetables» Gardening

Long Turbulent Labyrinth with Wide Water Passages

Clog-Resistant CylindricalInlet Filter

Landscaping

Row crops Orchards

Applications

IDIT 16 Max. Lateral Length (ID 13.8 mm, WT 0.9 mm, Inlet Pressure 2.5 bar)


0.20 0.30 0.40 0.50 0.60 0.75 1.00

1.6 62 84 102 119 135 156 190

2.3 44 59 72 84 96 111 135

3.1 35 48 59 70 79 92 112

4.3 29 39 48 56 64 75 91

10.0 16 22 28 33 37 43 53

IDIT Dripline - Technical Data

ModelInside

Diameter (mm)

Wall Thickness

(mm)


(bar)*


(bar)Exponent Kd

IDIT 16 13.80.9

0.83.5

0.51-0.53 0.25-0.31.15 4.3

* For efficient dripline flushing, the recommended minimum working pressure is 0.8 bar.

Packaging DataModel Coil Length (m)* Number of Coils

per Container

20’ 40’ 40’ HCIDIT 16 400 150 300 326

Idit

En 1

016


+972 4 6387001 +972 4 6385385 [email protected]

» On flat ground» At 10% flow variation» Representative table only. For further information, please refer to the Irrimetzer software.


INBAR

Features• Multi-purpose flat dripper for high-end crops and advanced agriculture• Wide range of working pressures for various topographies• Shuts down automatically at low pressure (< 0.14 bar) • Non drain: The dripline remains full of water during irrigation intervals, ensuring immediate and uniform irrigation along the dripline.• Anti-siphon mechanism prevents suction of sand and soil into the dripper• Accurate pressure-regulating labyrinth mechanism• Wide water passage along the labyrinth• Suitablefordifferentwatersources• Long-lasting silicon diaphragm• Durable under harsh field conditions and chemical applications


Shut down pressure: 1.4 m



Applications» Greenhouses» Row crops» Pulse irrigation» Vegetables

Unique Non-Drain SystemNon-Drain system: The dripline remains full of water during irrigation intervals, ensuring immediate and uniform irrigation along the dripline.

Greenhouses Row crops

Applications

Inlet Filter with Non-Drain Barrier



Primary Labyrinth

Primary Labyrinth with Wide Water Passage

Non-Drain PC Dripper

INBAR 20 Max. Lateral Length (ID 17.4 mm, WT 1.0 mm, Inlet Pressure 2.5 bar)


0.20 0.30 0.40 0.50 0.60 0.75 1.00

0.8 278 364 439 508 571 659 793

1.2 231 302 365 422 475 549 660

1.6 192 251 304 351 395 456 549

2.1 161 211 255 295 332 384 462

3.4 118 155 187 217 244 282 340



0.20 0.30 0.40 0.50 0.60 0.75 1.00

0.8 524 678 815 940 1055 1215 1460

1.2 435 564 678 782 878 1011 1215

1.6 361 469 564 650 730 842 1011

2.1 303 394 474 456 614 708 850

3.4 222 289 348 401 451 520 625



0.20 0.30 0.40 0.50 0.60 0.75 1.00

0.8 206 275 336 391 442 512 619

1.2 171 228 279 325 367 426 515

1.6 142 189 232 270 305 354 429

2.1 119 159 194 227 256 297 360

3.4 87 116 142 166 188 219 265



0.20 0.30 0.40 0.50 0.60 0.75 1.00

0.8 219 293 358 417 471 546 661

1.2 181 243 297 346 391 455 550

1.6 150 201 247 288 325 378 458

2.1 126 169 207 242 273 318 385

3.4 92 124 152 177 201 233 283

Inba

r En

1016


+972 4 6387001 +972 4 6385385 [email protected]

INBAR Dripline - Technical Data

ModelInside

Diameter (mm)

Wall Thickness

(mm)


(bar)


(bar)Kd

INBAR 16

15.8 0.4

0.8

2.00.2

15.2 0.6 2.5

13.8 0.9-1 3.5 0.27

INBAR 1715.8 0.6

0.82.5

0.215.0 0.9-1 3.5

INBAR 20 17.4 0.9-1.2 0.8 3.5-4.3 0.1

INBAR 22 21 0.4-1.0 0.8 3.5 0.08

INBAR 25 24.7 0.4-1.0 0.8 3.5 0.05

Packaging Data

ModelWall

Thickness (mm)


per Container

20’ 40’ 40’ HC

INBAR 16

0.4 1000 Narrow 360 720 880

0.6 <20cm spacing – 600 WideOther spacing – - 800 Wide 240 480 580

0.9 500 Wide

1.00 400 Coil 170 340 375

INBAR 17

0.6 20cm spacing – 600 WideOther spacing – 800 Wide

240 480 580

240 480 5800.9 500 Wide

1.15 400 Coil 170 340 375

INBAR 200.9 400 Coil 125 150 180

1.2 300 Coil 140 280 300

INBAR 22 1.00 350 Wide 240 480 580

INBAR 25 1.00 300 Wide 240 480 580



* Number of drums per pallet: Wide – 24, Narrow - 36

LIN

Features• Light flat integral dripper• Large clog-resistant inlet filter• Short and wide labyrinth with turbulent flow pattern - prevents particle settling


Multi-Purpose Integral DripperVersatile – Seasonal or multi-seasonal use, according to dripline specifications

Row crops

Light Flat Integral Dripper


Dripline diameters: 12 / 16 / 17 / 20 / 22 and 25 mm


Applications» Row crops» Landscaping» Greenhouses» Vegetables» Sugarcane» Industrial crops» Gravity systems/ Small household plots

Greenhouses

Landscaping

Applications

Large Clog-Resistant Inlet Filter

Wide Turbulent Flow Labyrinth

Row crops

Lin

En 1

016

LIN Dripline - Technical DataModel

Inside Diameter

(mm)

Wall Thickness

(mm)


(bar)


(bar)Exponent Kd

LIN 12 11.150.4

0.52.0

0.47– 0.49 0.30.6 2.5

LIN 16

15.80.15-0.25

0.5

1.5

0.47– 0.49

0.180.3-0.4 2.0

15.2 0.5-0.6 2.5 0.2

13.8 0.9 3.5 0.25

LIN 1715.8

0.4

0.5

2.0

0.47– 0.490.18

0.5-0.6 2.53.5

15.00.9

0.21.0 4.0

LIN 20 17.40.9

0.53.5

0.47– 0.49 0.181.0 4.0

LIN 2221.2

0.3

0.5

1.5

0.47– 0.490.060.4 2.0

0.5-0.6 2.5

21.0 1.0 3.5 0.08

* Number of drums per pallet: Wide – 24, Narrow - 36

Packaging DataModel

Wall Thickness

(mm)Drum Length (m) Number of Coils/

Drums*per Container

20’ 40’ 40’ HC

LIN 120.4 1200 Narrow

360 720 8280.6 800 Narrow

LIN 16

0.15

Spacing above 25 cm – 3000 Narrow

360 720 828

Spacing 20-25 cm – 2500 Narrow

Spacing below 20 cm – 2000 Narrow

0.2

Spacing above 25 cm – 2500 Narrow

Spacing 20-25 cm – 2000 Narrow

Spacing below 20 cm – 1600 Narrow

0.4 1000 Narrow 360 720 828

0.6 800 Wide 240 480 580

0.9 500 Wide

LIN 170.6 800 Wide

240 480 5800.9 500 Wide

LIN 20 0.9 300 Narrow 360 720 828

LIN 220.4 1000 Narrow

360 720 8280.6 800 Narrow

LIN 12 Max. Lateral Length (ID 11.15 mm, WT 0.6 mm, Inlet Pressure 2.5 bar)


0.20 0.30 0.40 0.50 0.60 0.75 1.000.8 66 88 107 125 141 164 1981.2 51 68 83 96 109 126 1531.6 41 55 68 79 89 104 1262.0 36 48 58 68 77 90 1094.0 22 30 37 43 49 57 69



0.20 0.30 0.40 0.50 0.60 0.75 1.000.8 114 151 184 214 242 280 3391.2 87 116 142 165 186 216 2611.6 71 95 116 135 153 177 2152.0 62 82 101 117 132 153 1864.0 39 52 64 74 84 97 118



0.20 0.30 0.40 0.50 0.60 0.75 1.000.8 148 197 239 278 313 363 4381.2 114 151 184 214 241 280 3381.6 93 124 151 175 198 229 2772.0 80 107 130 152 171 198 2404.0 50 67 82 96 108 126 152

White Cover - 8 mil (0.2 mm) and upBrown Cover - 6 mil (0.15 mm)


+972 4 6387001 +972 4 6385385 [email protected]


» On flat ground» At 10% flow variation » Representative tables only. For further information, please refer to the Irrimetzer software.

MINI LIN Small Flat Integral Dripper

Wide Turbulent FlowLabyrinth

Large Clog-ResistantInlet Filter

Features• Optimal choice for seasonal use• Cost-effective dripper• Compactandefficient,forlighttubes up to 0.4 mm wall thickness • Short,widelabyrinthwithturbulentflow- prevents particle settling • Largeinletfilter,highlyclog-resistant

Miniature Cost-EffectiveDripper Compactandefficient,forlighttubes up to 0.4 mm wall thickness

TechnicalDataDripperflowrates: 1.0 / 1.6 l/h

Driplinediameters: 12 / 16 / 22 mm

Driplinewallthickness: 0.15-0.4 mm

Applications» Row crops» Landscaping» Greenhouses» Vegetables» Sugarcane» Industrial crops» Gravity systems / Small household plots

Row crops

Greenhouses

Landscaping

Applications

Row crops

Min

i Lin

En

1016

MINILINDripline-TechnicalData

PackagingData

ModelWall

Thickness (mm)

Lateral Length (m)Drum

Number of Drums** per Container

20’ 40’ 40’ HC

MINI LIN 12

0.2 2800 Narrow360 720 880

0.3 2500 Narrow

MINI LIN 16

0.15 3500 Narrow

360 720 8800.2 2500 Narrow

0.25 2000 Narrow

0.3 1800 Narrow

MINI LIN 22

0.3 1800 Narrow360 720 880

0.4 1500 Narrow


+972 4 6387001 +972 4 6385385 [email protected]

White Cover - 8 mil (0.2 mm) and up

MINI LIN 12 Max.LateralLength(ID11.15mm,WT0.4mm,InletPressure2.0bar)


0.20 0.30 0.40 0.50 0.60 0.75 1.001 62 81 98 113 127 146 176

1.6 46 60 72 84 94 109 130



0.20 0.30 0.40 0.50 0.60 0.75 1.001.0 110 145 173 200 225 260 3131.6 81 107 130 151 167 193 232



0.20 0.30 0.40 0.50 0.60 0.75 1.001.0 192 247 295 340 380 438 5251.6 142 182 218 252 282 324 389

Brown Cover - 6 mil (0.15 mm)

» On flat ground» At 10% flow variation» Representative tables only. For further information, please refer to the Irrimetzer software.


ModelInside

Diameter(mm)

Wall Thickness

(mm)


(bar)


(bar)Exponent Kd

11.15 0.2-0.3 0.5 2.0 0.47 0.18MINI LIN 12

MINI LIN16 15.8

0.15-0.20.5

1.50.47– 0.49 0.13

0.3-0.4 2.0

MINI LIN22 21.2

0.30.5

1.50.47– 0.49 0.05

0.4 2.0

SUPER COMPACT

Features• Small soft cylindrical integral dripline• Highly cost-effective• Flexible dripper structure allows flat packaging, thus reducing freight volume• Double cylindrical inlet filter for best clog-resistance• Suitableforeffluentreuseandlowqualitywater

Flexible Solution Cylindrical dripper advantages, at a reduced cost

Small Soft Cylindrical Integral Dripper

Technical DataDripper flow rate: 1.4 l/h

Dripline diameter:16 mm

Dripline wall thickness:0.65 mm

Applications» Greenhouses » Orchards» Row crops» Turf and landscaping» Vegetables

Greenhouses

LandscapingRow crops

Orchards

Applications

Flexible CylindricalDripper

Wide Turbulent Flow Labyrinth

Cylindrical Clog-ResistantInlet Filter

SUPER COMPACT Dripline - Technical Data

ModelInside

Diameter (mm)

Wall Thickness

(mm)


(bar)*


(bar)Exponent Kd

SUPER COMPACT

1614.7 0.65 0.5 2.5 0.58 0.15

* For efficient dripline flushing, the recommended minimum working operation is 0.5 bar.

** Number of drums per pallet: Wide – 24

Packaging DataModel Coil Length (m)

DrumNumber of Drums**

per Container

20’ 40’ 40’ HC

SUPER COMPACT

16500 Wide 240 480 580

Supe

r Com

pact

En

1016


+972 4 6387001 +972 4 6385385 [email protected]

SUPER COMPACT 16 Max. Lateral Length (ID 14.7 mm, WT 0.65 mm, Inlet Pressure 2.5 bar)


0.20 0.30 0.40 0.50 0.60 0.75 1.00

1.4 67 89 108 125 141 163 197


» On flat ground» At 10% flow variation» Representative table only. For further information, please refer to the Irrimetzer software.

VARDIT

Features• Efficient and cost-effective flat dripper • Wide range of working pressures for various topographies• Uniform flow rate• Expanded inlet filter• Highly accurate pressure-compensating labyrinth mechanism• Wide water passages along the labyrinth• Suitablefordifferentwatersources• Long-lasting silicon diaphragm• Durable under harsh field conditions and chemical applications

PC Dripper




Applications» Greenhouses» Orchards» Row crops» Landscaping» Vineyards» Vegetables» Industrial crops


Primary Labyrinth


Large Inlet Filter



Greenhouses

LandscapingRow crops

Orchards

Applications

VARDIT Dripline - Technical Data

VARDIT 17 Max. Lateral Length (ID 15.8 mm, WT 0.6 mm, Inlet Pressure 2.5 bar)


0.20 0.30 0.40 0.50 0.60 0.75 1.00

0.85 227 304 371 433 489 567 686

1.2 181 243 297 346 391 455 550

1.6 150 201 247 288 325 378 458

2.1 126 169 207 242 273 318 385

3.4 92 124 152 177 201 233 283



0.20 0.30 0.40 0.50 0.60 0.75 1.00

0.85 340 446 538 623 700 809 972

1.2 272 357 431 499 561 648 780

1.6 226 296 358 415 467 540 649

2.1 189 249 301 348 392 453 546

3.4 138 182 221 256 288 333 401



0.20 0.30 0.40 0.50 0.60 0.75 1.00

0.85 214 286 349 406 458 532 642

1.2 171 228 279 325 367 426 515

1.6 142 189 232 270 305 354 429

2.1 119 159 194 227 256 297 360

3.4 87 116 142 166 188 219 265

VARDIT 25 Max. Lateral Length (I.D 24.7 mm, W.T 1.0 mm, Inlet Pressure 3.5 bar)


0.20 0.30 0.40 0.50 0.60 0.75 1.00

0.85 565 733 880 1015 1139 1313 1576

1.2 513 666 801 924 1038 1196 1437

1.6 426 554 666 768 863 995 1196

2.1 357 465 560 646 726 837 1005

3.4 262 341 411 474 533 615 739

Vard

it En

101

6

ModelInside

Diameter (mm)

Wall Thickness

(mm)


(bar)


(bar)Kd

VARDIT 16

15.8 0.4

0.8

2.00.2

15.2 0.6 2.5

13.8 0.9-1 3.5 0.27

VARDIT 1715.8 0.6

0.82.5

0.215.0 0.9-1 3.5

VARDIT 20 17.4 0.9-1.25 0.83.5

0.14.3

VARDIT 22 21 0.4-1.0 0.8 3.5 0.08

VARDIT 25 24.7 0.4-1.0 0.8 3.5 0.05

* Number of drums per pallet: Wide – 24, Narrow – 36

Packaging Data

ModelWall

Thickness (mm)


per Container

20’ 40’ 40’HC

VARDIT 16

0.4 1000 Narrow 360 720 880

0.6 800 Wide240 480 580

0.9 500 Wide

1.00 400 Coil 170 340 375

VARDIT 17

0.620cm spacing - 600 Wide

240 480 580Other spacing - 800 Wide

0.9 500 Wide

1.15 400 Coil 150 300 375

VARDIT 200.9 400 Wide 240 480 580

1.15 300 Coil 140 280 300

VARDIT 22 1.00 350 Wide 240 480 580

VARDIT 25 1.00 300 Wide 240 480 580


+972 4 6387001 +972 4 6385385 [email protected]



VERED

Features• The most popular dripper for orchards• Excellent field performance under harsh conditions • Highly durable and reliable structure• Unique and accurate pressure-compensating labyrinth mechanism• Wide water passages with turbulent flow pattern• Advanced self-flushing mechanism at the beginning and at the end of each irrigation cycle• Large clog-resistant inlet filter• Wide compensation range, up to 4.3 bar


Flat Heavy-Duty PC Dripper

Technical DataDripper flow rates: 1.2 / 1.6 / 2.1 / 3.5 l/h

Dripline diameters: 16 / 17 / 20/ 22 / 25 mm


Applications» Row crops» Orchards » Landscaping» Vineyards» Vegetables

Large Inlet Filter




Primary Labyrinth


Landscaping

Row crops Orchards

Applications

VERED Dripline - Technical Data

ModelInside

Diameter (mm)

Wall Thickness

(mm)


(bar)


(bar)Kd

VERED 1615.2 0.6 0.5 2.5 0.65

13.8 0.9 0.5 3.5 0.95

VERED 17 15.00.9

0.53.5

0.71.15 4.3

VERED 20 17.41.0

0.53.5

0.451.25 4.3

VERED 22 21.0 1 0.5 3.5 0.24

VERED 25 24.7 1 0.5 3.5 0.21

* Number of drums per pallet: Wide – 24, Narrow – 36** Available also in coil length shorter than 400m

Packaging Data

ModelWall

Thickness (mm)


per Container

20’ 40’ 40’HC

VERED 160.6 800 Wide*

240 480 5800.9 500 Wide**

VERED 170.9 500 Wide 240 480 580

1.15 400 Coil 170 340 375

VERED 200.9 400 Wide** 240 480 580

1.25 300 Coil 140 280 300

VERED 22 1.00 350 Wide 240 480 580

VERED 25 1.00 300 Wide 240 480 580Ve

red

En 1

016


+972 4 6387001 +972 4 6385385 [email protected]

VERED 17 Max. Lateral Length (ID 15.0 mm, WT 0.9 mm, Inlet Pressure 3.5 bar)


0.20 0.30 0.40 0.50 0.60 0.75 1.00

1.2 159 225 284 340 391 463 573

1.6 131 186 236 282 325 384 476

2.1 110 156 197 236 272 322 400

3.5 78 111 141 169 195 231 287



0.20 0.30 0.40 0.50 0.60 0.75 1.00

1.2 144 202 255 304 350 414 511

1.6 119 167 212 252 290 343 424

2.1 99 140 177 211 243 288 356

3.5 71 100 127 152 175 207 256



0.20 0.30 0.40 0.50 0.60 0.75 1.00

1.2 219 306 384 456 523 616 758

1.6 151 253 319 379 434 512 630

2.1 151 212 267 317 364 429 529

3.5 108 152 191 228 261 309 881



Cylindrical PC Dripper - Metzer · Spacing between Drippers (m) 0.20 0.30 0.40 0.50 1.00 2.00 3.00...

Documents

Transcript of Cylindrical PC Dripper - Metzer · Spacing between Drippers (m) 0.20 0.30 0.40 0.50 1.00 2.00 3.00...