CV_Gregor,P,rev.2, 13.4.2016

CURRICULUM VITAE

Name: GREGOR Pavel, Ing.

Nationality: Czech

Date of birth: July 21st, 1983

Mobil: +420731154205

Email: [email protected]

Skype: gregor.pavel5312

Domicile: Czech Republic, Moravicany

Practice of foreign languages: English (written, spoken)

German (written and spoken basic)

Czech (written, spoken)

Slovak (written, spoken)

Education: Technical Secondary School of General Machinery – 1998 to 2002/

Leaving Examination, Bc.

Technical University of Ostrava

Faculty of Mechanical Engineering – 2002 to 2007 / Ing.

Qualification: International welding inspector – IWI-C / CZ 08001

Certified European welding engineer – CEWE/CZ 09002

International welding engineer – IWE / CZ 07044

International welding technologist – IWT / CZ 05031

Direct visual test – EN 473-VT2-Multifunction Sector

Direct visual test – EN 473-VT2-according to PED 97/23/EC

Competent person for welding revision of ČD

Certificate welding supervisor for nuclear energetics (ČEZ)

PT2(multifunction sector) course according to EN ISO 9712

MT2(multifunction sector) course according to EN ISO 9712

UT2 course according to EN ISO 9712

RT2 course according to EN ISO 9712

Saudi Aramco inspector - SAP no.:70015331

QM03-Mechanical-Gen

QM04-Non-Destructive Examination

QM05-Line Pipe

QM06-Fabricated piping

QM07-Valves

QM08-Fittings

QM09-Gaskets

QM15-Structural steels

QM26-Rotating Equip-Pumps

QM27- Rotating Equip-Compressors

QM28- Rotating Equip-Turbines

QM30-Pressure Vessels

QM31-Heat Exangers

QM32-Boilers

QM33-Heaters

QM34-Tanks

QM37-Relief Valve, Control Valve

VT2,PT2,MT2,RT2,UT2 according to SNT-TC-1A

mailto:[email protected]

NACE Coating inspector level 1 – Certified

NACE Coating inspector level 2 – Course

Frosio inspecor level III certified according to NS 476, cert.no.9202

The National Board of Boiler&Pressure vessel inspector certificate-ASME-

Fabrication: General and Welded

The National Board of Boiler&Pressure vessel inspector certificate – 2015

National Board Inspection Code, Part 1, Instalation

The National Board of Boiler&Pressure vessel inspector certificate – 2015

National Board Inspection Code, Part 2, Inspection

Codes and standards: ASME V,VIII,IX, AWS D1.1, DIN, EN, CSN, PED 97/23/ES,API6A,API6D,

API598,API14A,API other, ASTM, TEMA, NORSOK, NACE/SSPC, DNV, LR

Main specialities: Heavy machinery, welded pipes, tubes, fittings, castings etc.

Structures – main frame, cranes, pressure vessels, ball valves, gate valves, plug

valves, tanks, boilers, offshore platforms, transition pieces, monopole, pipe line,

Painting– water based and solvent based

Experience in welding(base material): Welding of hard surfaces –Hardox or other

Welding of high strengh material - Weldox S1100QL, S960QL, S690QL

Welding of stainless steel – 316LSi, 308LSi

Welding of carbon steel – S355J2+N, NVE36, S355NL

Duplex, Aluminium

Experience in welding(welding meth.): 111 – Manual metal arc welding

131 – MIG welding with solid wire electrode

135 – MAG welding with solid wire electrode

136 – MAG welding with flux cored electrode

138 – MAG welding with metal cored electrode

141 – TIG welding with solid filler material

121 – Submerged arc welding

783 – Drawn arc stud welding with ceramic

151 – Plasma MIG welding

Summary of career: since December 2012

Inspekt-Servis, Edif NDE, ERAM, SQS, QTS etc

External Freelance Inspector - for heavy machinery and steel structures (oil&gas bussines,

petrochemical&chemical bussines, offshore bussines etc.), ball valves, gate

valves, plug valves, choke valves, desuperheaters, heat exchangers, pumps,

compresors, turbines, seamless pipes, welded pipes, containers, pressure

vessels, boilers, tanks, cryogenic heat exchangers etc.; pre-inspection

meeting, in-process inspection, marking, painting, packing, shipment,

welding, assembling, manufacturing, machining, expediting, final inspection,

factory acceptance tests, witness of hydrostatic tests, verifying of all

documentation etc.

since January 2012

ISI Inspection Servis Geneva s.a.

External Inspector - for heavy machinery and steel structures, ball valves, gate valves; pre-

inspection meeting, marking, coating, painting, packing, shipment, welding,

assembling, manufacturing, machining, expediting, final inspection, witness

hydrostatic test, verifying of all documentation - see below

since January 2011

Intertek

External Inspector

- hydrostatic tests of pressure vessels, performance tests of air compressors,

final inspection of steel structures, NDT – check of qualification personnel

and check of procedure, expediting of venture, expediting of ball valves –

see below

since November 2010

ATG, RINA

External Inspector

- for inspection of dynamical and statical balancing tests of rotors,

hydrostatic tests of suction and discharge body, performance

test of pump, welding supervisor, expediting

August 2008 – March 2012

UNEX a.s.

Development department manager

- coordination and team leading in the field of machining, materials, shanking,

surface treatment and welding; project team leading; cooperation

with desing and technological preparation of fabrication; leading employees

executing welding operations on steel structures in the process of fabrication

June 2008 – March 2012

UNEX a.s.

Welding inspector

- assessment of steel welding conformity construction; verification and

observance of the welding procedure and NDT testing, complete inspection

of documentation (basic material certification, NDT reports, WPS, WPQR)

November 2007-March 2012

UNEX a.s.

Welding engineer

- assessment of drawing documentation, proposing of suitable technologies,

welding procedures, preparation and equipments, processing of welding

documentation according to EN, DIN, ASME, AWS; welding supervision

and quality assessment

July 2005 – March 2012

UNEX a.s.

Welding technologist

- assessment of drawing documentation, proposing of suitable technologies,

welding procedures, preparation and equipments, processing of welding

documentation according to EN, DIN, ASME, AWS

Major assignments:

Name of product Project User/Cleint Contractor Vendor Manufacturer Inspection location Activities o.b.o. Type of inspection Activities

Number of inspection

dates Year

Main Heat Exchanger, Exchanger + Vessel

EPC13 UTILITY PACKAGE

JAZAN REFINERY PROJECT

Saudi Arabian Oil Company (Saudi Aramco) Hitachi Air Liquide Fives Group Fives, Golbey, France Hitachi Japan

In-Process, Final inspection, Packing, Documentation review, Shipment Inspection 4 2016

Plug Valves

REDUCE SALES GAS WATER CONTENT@ SGP and UGP

Saudi Arabian Oil Company (Saudi Aramco)

TARGET Construction Saudi Arabia

BRDR. Christensen ApS

BRDR, Skuderlose, 4690 Haslev, Denmark TARGET

PIM, in-process, Coating,Final inspection, Packing, Documentation review, Shipment Inspection 1 2016

11 sets of Medium Duty Centrifugal Pump

Jubail Interface Supply Facility Project

Saudi Aramco Total Refininf and Petrochemical Company (SATORP)

SINOPEC ENG´G Group Saudi CO.LTD

RUHRPUMPEN GmbH

RUHRPUMPEN GmbH, Stockumerstrasse 28 D58453 Witten, Germany SINOPEC

In-process, FAT, Coating, Final inspection, Packing,Documentation review, Shipment Inspection 4 2016

Split Tee, Pipe Spool, Hot Tap Adapter

56’’ EWG-2 SECTION III SALES GAS PIPELINE (MGS PH-1) AND 30’’ EWECG-1 SALES GAS PIPELINE

Aramco Oversea Comapny

DODSAL & Company

RMA Kehl, Oststasse 17, 77964 Kehl, Germany

RMA Kehl, Oststasse 17, 77964 Kehl, Germany

Dodsal& Company


Desalter Package / Static Mixer

JAZAN Refinery and Terminal Project (EPC 9)


SK engineering& construction

Fjords Processing

Axinox, Soissons, France Axinox, Soissons, France SKE&C

Final inspection, Packing, Documentation review, Shipment Inspection 1 2016

Plug Valves

Construction of PP12 Gas Fuel Delivery System


MUSTANG-HDP

IMCO/ KANOO


BRDR, Skuderlose, 4690 Haslev, Denmark MUSTAND-HDP


Loading Arms

Yamal LNG Project

Yamal LNG / Technip

JGC Corporation SVR GmbH Flashsteel

Flashsteel, Martinov, Czech Republic JGC Corporation

PIM, In-process, check of welding of PQR, testing of welded samples, Final inspection, Documentation review Inspection 6 2016

Loading Arms

Yamal LNG Project

Yamal LNG / Technip

JGC Corporation SVR GmbH Flashsteel

Flashsteel, Martinov, Czech Republic JGC Corporation Expediting 1 2016

Pipe Metalic, SAW Straight, Non Sour

56´´ EWG-2 Loop-2 and 56´´ KAEC Pipeline Project


Dodsal & Company

Global Pipe Company

Erndtebrucker Eisenwerk GmbH & Co.KG

EEW, Im Grunewald 2, 57339 Erndtebruck, Germany

Dodsal&Company

PIM, In-process, Final inspection, Documentation review, Packing, Shipment Inspection 1 2016

ZVS Plug Valves

Expand LPG Production Facilities at Yanbu Refinery


TARGET Construction S.A WLL

Saudi FAL Co.LTD


BRDR, Skuderlose, 4690 Haslev, Denmark TARGET


Oil Modular Skid / Scraper Valves

KHURAIS WELLS MANIFOLDS AND PIPELINE


Gulf Steel Works

Hartmann Valves GmbH

Hartmann Valves GmbH, Bussardweg 15, 31303 Burdorf-Ehlershausen, Germany

Gulf Steel Works


Pressure Safety Relief Valves




LESER GmbH & Co KG Factory

LESER GmbH & Co KG Factory Itzehoer Strasse 63 – 65 24594 Hohenwestedt, Germany SKE&C


Stainless Steel Welded Pipes




BSL Pipes & Fittings

BSL Pipes & Fittings, Billy Sur Aisne- France SKE&C

In-Process, Final inspection, Packing, Documentation review, Shipment Inspection 14 2016

Secondary steel - Boat landings, External ladders, Intermediate platforms, Upper ladders, External platforms

Veja Mate Wind Farm Veja Mate

Offshore Wind Force company

Bladt Industry, Poland

JWSC, Stetin Poland, Gotech, Nove Czernowo, Poalnd

JWSC, Stetin Poland, Gotech, Nove Czernowo, Poalnd

Offshore Wind Force company

In-Process (assembling, welding, flame straightening etc), Final inspection (dimensional check, NDT check,surface preparation), Marking, Packing, Documentation review, Shipment Inspection 128

2015 / 2016

Lube Oil Units

Shaybah Combined Cycle Power Generation Project

Aramco Oversea Comapny SEPCO Siemens

AEL Apparatebau GmbH

AEL Apparatebau GmbH , Dobelner Str.9, 04703 Leisnig, Germany SEPCO

In-Process, Coating, Final inspection, Packing, Documentation review, Shipment Inspection 12

2015 / 2016

Gantry Cranes

Yamal LNG Project

Yamal LNG / Technip

JGC Corporation PROTEA SP. Z O.O.

PROTEA SP. Z O.O., Gorzowska 18 str.Ligota Gorna, 46-203 Kluczbork,Poland JGC Corporation

PIM, In-process, Visual inspection of welding activities, check of assembling, check of location before closing, painting activities check, NDT check, Factory acceptance test, Final inspection, Documentation check, Packing, Shipment Inspection 48

2015 / 2016

Gantry Cranes

Yamal LNG Project

Yamal LNG / Technip

JGC Corporation PROTEA SP. Z O.O.

PROTEA SP. Z O.O., Gorzowska 18 str.Ligota Gorna, 46-203 Kluczbork,Poland JGC Corporation Expediting 6

2015 / 2016

Sunp Pumps

Construction of new lift station IW-10A MARAFIQ-YANBU

BR C.A.T. International Co.LTD

Abunayyan Trading Corp.

Xylem Water Solutions

Xylem Water Solutions, SE-361 80 Emmaboda, Sweden


FAT, Documentation review, Final inspection Inspection 1 2015

Mud Gas Separators, Liquid Gas Seal Tank, Bulk Storage Tank, Surge Tanks, Dust Cyclones Collectors, Rock Catchers, Air Receivers

P6056 MARINER Topside EPC Project BP, DSME

RDS A KCA Deutag Company MH Wirth

Astra, Machinery Plan Astra AB

Astra, Machinery Plan Astra AB.Ulonu str. 33 , LT-62161 Alytus, Lithuania RDS

In-Process (assembling, welding, hydrostatic test etc), Final inspection, Documentation Review, Packing, Shipment Inspection 112

2014 / 2015

Desuperheaters

Jazan Refinery&Terminal Projects EPC #2


Hyundai Arabia Company LLC

CCI Valve Tehcnology GmbH

CCI Czech Republic s.r.o.

CCI Czech Republic s.r.o., Brno, Czech Republic AOC-H

PIM, in-process, final inspection, Documentation review

Monitoring Inspection 1

2015 / 2016

Plug Valves

JAZAN Refinery and Terminal Project




BRDR, Skuderlose, 4690 Haslev, Denmark SKE&C

PIM, in-process, Coating,Final inspection, Packing, Documentation review, Shipment Inspection 1

2015 / 2016

Carbon Steel Seamless Tubes

MASTER GAS SYSTEM-PHASE 1

Saudi Arabian Oil Company (Saudi Aramco) SEPCO

S&T Corporation

Zeleziarne Podbrezova

Zeleziarne Podbrezova, Podbrezova, Slovakia SEPCO

PIM, In-Process (Eddy current tests, Mechanical testing etc.), Final inspection, Packing, Documentation review, Shipment Inspection 3 2015

Ball Valves

Expand Shabab Pipeline Capacity to 1000MBPD


BR C.A.T. International Co.LTD MSA a.s.

MSA, Dolni Benesov, Czech Republic



Nitrogen Generation Package, Heater Inserts

Midyan Gas Processing Facility (MGPF)


LARSEN & TOUBRO ARABIA LLC.

Hadetec, The Netherlands ExHeat Ltd

ExHeat Ltd, Threxton Road Industrial Estate, Watton, Thetford Norfolk, IP25 6NG, United Kindom


Check of Heater Panel -Wiring diagram, Functional test of Thyristor control panel, Eletrical test final, Functiona test-Final Panel Inspection 1 2015

Ball Valves AOC Source inspection

Aramco Oversea Comapny MSA a.s.

MSA, Dolni Benesov, Czech Republic AOC-H

In-Process (visual inspection and base material identification, hydrostatic shell test before internal coating,hydrostatic tests after internal coating, coating, final inspection, documentation review, packing, shipment Inspection 10 2015

Oil Cooler, Closed-Circuit Cooling water cooler, Air Cooled Heat Exchanger - Oil Cooler, Air cioled Heat Exchanger - CCE Unit 1

Shaybah Combined Cycle Power Generation Project

Aramco Oversea Comapny SEPCO Siemens

GEA-BTT BATIGNOLLES TECHNOLOGIES THERMIQUES

GEA-BTT, 25 RUE DU RANZAI, NANTES, 44025, France SEPCO

PIM, In-porcess (PIM, assembling, dimnesional check etc.), Final inspection, Documentation review, Packing, Shipment Inspection 12 2015

AXL 2nd Stage Shipper Pump with Lube Oil Systém - Main Rotor, Spare rotor

Shaybah crude stabilization project – ABQAIQ Plants


ESSAR Projects Saudi Company

Flowserve Testing Centre Vossendaal

Flowserve Testing Centre Vossendaal, Paralelweg 6, 4878 AH, Etten-Leur, Netherlands ESSAR

Performance Tests including NPSHR and mechnical run, Final inspection including name plate verification, closing of mechanical punch list, documentation review, packing, shipment Inspection 8 2015

Ball Valves

South Tank Farm Facilities, Jazan

Saudi Arabian Oil Company (Saudi Aramco) Petrofac MSA a.s.

MSA, Dolni Benesov, Czech Republic Petrofac

Hydrostatic tests and pneumatic tests Inspection 5 2015

CS Header Boxes for LP Condensate Vent Condenser 1pc of Inlet/Outlet Header, Return Header, CS Header Boxes Excess Steam Condenser 8pcs of Inlet Header, Return Header, outlet header

JAZAN Refinery and Terminal Project (EPC13 Utility Package)

Saudi Arabian Oil Company (Saudi Aramco) Hitachi LTD Hamon D’Hondt

Hamon D’Hondt, 1524 rue de la Paix 59970 Fresnes Sur Escaut France Hitachi LTD

Final weld heat treatment, visual inspection, random dimensional check, Final inspection after PWHT including U-Stamp marking, Documentation review Inspection 3 2015

Plug Valves(MOV, GOV and ZV)

Midyan Gas Processing Facility (MGPF)




BRDR, Skuderlose, 4690 Haslev, Denmark


PIM, in-process(PMI, material identificaiton, hydrostatic tests etc.), Coating,Final inspection, Packing, Documentation review, Shipment Inspection 16 2015

Globe, Angle valves

JIGCC Power Block Project (Package 4)

Aramco Oversea Comapny SEPCO NEM

Emerson Process Management

Emerson Process Management, Szekesfehervar, Holland fasor 6, Hungary SEPCO

Visual inspection, Pressure tests, coating, Markings, Documentation review, final inspection Inspection 2 2015

Stainless Steel Welded Pipe




BSL Pipes & Fittings

BSL Pipes & Fittings, Billy Sur Aisne- France SKE&C

In-Process (Heat Treatment, mechanical testing), Closing of NCR, Final inspection, Packing, Documentation review, Shipment Inspection 4 2015


Jazan Refinery Unit J23


Tecnicas Reunidas

S&T Corporation


Zeleziarne Podbrezova, Podbrezova, Slovakia

Tecnicas Reunidas

In-Process (Eddy current tests, Mechanical testing etc.), Final inspection, Packing, Documentation review, Shipment Inspection 3 2015

Reciprocating Compressors for Propylene Service type 1TES40 + spare parts

Lake Charles Chemicals (LCCP) Project FLUOR

Neuman & Esser Germany

Neuman & Esser Germany, Wurzen-Germany FLUOR

PIM, in-process, Final inspection, Documentation review Inspection 4 2015

Special fittings for jackets piping RABIGH II CP2

Aramco Oversea Comapny DAELIM APB

APB, Gustav-Kramer-Strasse 5b, 8605 Kapfenberg, Austria DAELIM

In-process(PMI, PMI marking, hydrostatic test etc.), Final inspection, Packing, Documentation review 3 2015

Ball Valves

Cogen Interconnection Facilities for 3rd Party Cogen at Ratanura Refinery


FUTAI ARABIA LLC

ELSTER NV/SA MSA a.s.


PIM, In-Process, Final inspection, Documentation review

Monitoring Inspection 10 2015

Pipe Spoools

Brighouse Bay Compressor Station

Bord Gais Networks

Waga Warme Gastechnik GmbH Hilliger GmbH

Hilliger GmbH, Bahnhofstraße 10 04808 Thallwit

Bord Gais Networks

Review of welding procedure qualification, welders qualification, review of NDT, Material traceability, welders stamping, hydrostatic pressure test, tightness test, tightness test waterpipes, dimensional inspection pipe spools, final inspection. Inspection 2 2015

Ball Valves

OFFSHORE MAINTAIN POTENTIAL FACILITIES - 2012/ABSF PIPELINES, SS CABLES & JUMPERLINES (BI 10-03042-0012


SAIPEM S.p.A. Sharjah MSA a.s.


Painting, Marking, Final inspection(dimensional check, visual check), Documentation review


Multiphase flowmeters

OFFSHORE MP FACILITIES 2014


SNAMPROGETTI SAUDI ARABIA CO. LTD.

ONESUBSEA PROCESSING AS

ONESUBSEA PROCESSING AS, KLEPPESTO, HORSOY, Norway AOC-H

FAT, Final inspection, Documentation review


Vertical Pumps

Shaybah CPFE Project


Samsung Engineering Flowserve UK

Flowserve UK, Newark/United Kingdom

Samsung Engineering

Final inspection including visual, dimensional and name plate check, Packing, Documentation review Inspection 1 2015




PIM, In-Process (visual inspection and base material identification, hydrostatic shell test before internal coating,hydrostatic tests after internal coating, coating, final inspection, documentation review, packing, shipment Inspection 6 2015

SHP On-Off Safety Valves

RABIGH Phase II CP3/4 Project

Aramco Overseas Company B.V. & Sumitomo Chemical Co., Ltd.

GS Engineering&Construction BHDT GmbH

BHDT GmbH, 8605 Kapfenberg/ Austria

GS Engineering& Construction

PIM, in-process, Non Destructive testing, hydrostatic tests, painting, final inspection, packing, marking Inspection 3 2015

Plug valves (MOV/GOV)

Master Gas Expansion Phase 1 56´´ EWG-2 Section III (LOOP 2)

Aramco Oversea Comapny DODSAL

Serck Audco Valves

Serck Audco Valves, Burrell Road , Haywards Heath, United Kindom , RH16 1TL AOC-H PIM Inspection 1 2015

Pelletizer systém

IBN SINA Poly Oxy Methylene IBN SINA

Intecsa Ingenieria

Coperion GmbH ECON GmbH

ECON GmbH, Weisskirchen, Austria

Intecsa Ingenieria Closing of Punch list Inspection 2 2015

Gate Valves, Swing Check Valve

Worley Parsons

Trouvay& Cauvin Ltd MSA a.s.

MSA, Dolni Benesov, Czech Republic Worley Parsons

Nitrogen leak pressure test, Functional test, pressure test, Documentation review Inspection 3 2015


L9C0045] Jazan Refinery and Terminal


Tecnicas Reunidas



Tecnicas Reunidas


Liquid incinerator package (2x100%) 2 Trains / Plate heat exchanger

Rabigh II Common utilities&tank farm (UO2&UO3,RP1]

Aramco Oversea Comapny Petrofac

John Zink Hamworthy Combustion

Tranter International AB

Tranter International AB, 46228 Vanersborg, Sweden AOC-H

PIM, Pressure tests, final dimensional and visual check, check of code stamping, check of ASME U-stamp


ER310-Essential Service Generator Package

Ivar Aasen Field Dev. Project

Det Norske Oljeselskap ASA SMOE

Frank Mohn Flatøy AS Metalistas LT

Metalistas LT,35113 PANEVEZYS - LITHUANIA SMOE

Visual inspection, dimensional check, documentation review Inspection 1 2015

Antisurge Valve

JSC Yamal LNG Plant EPSCC

Yamal LNG / Technip Technip


CCI Czech Republic s.r.o., Brno, Czech Republic Technip

Final inspection including visual check, dimensional check and name plate check Inspection 1 2015

Helifuel Transfer Supply Skids

Arabiyh & Hasbah

Aramco Oversea Comapny Saipem

Eeastern Petroleum Supplies

Eeastern Petroleum Supplies AOC-H

Dimensional and physical verification,welding check review and NDT, PMI test review, wiring check, equipmenty lay out check, wiring marking and tagging check, label check, component check, functional test Inspection 1 2015

SHP blow-off valve

RABIGH Phase II CP3/4 Project

Aramco Overseas Company B.V. & Sumitomo Chemical Co., Ltd.

GS Engineering&Construction BHDT GmbH

BHDT GmbH, 8605 Kapfenberg/ Austria

GS Engineering& Construction

PIM, in-process, Hydrostatic tests, functional tests, final inspection, packing, marking Inspection 3 2015


Jazan Refinery and Terminal Project


Tecnicas Reunidas



Tecnicas Reunidas


HP Pipe Fittings and Flanges Aquarius Shell FLUOR PFF Europe BV

PFF Europe BV, Wielewaalweg 4, 4791 PD Klundert, The Netherland FLUOR

Base material traceability, marking, documentation review Inspection 10 2015

Gate Globe Check Valves Aquarius Shell FLUOR MRC Global

MRC Global, 2665 Bleiswijk, The Netherland FLUOR

Visual check, name plate check, painting check, final inspection, documentation review Inspection 1 2015

Wet Chlorine Filter 21F001 Sulphurnet

Polytex Composite, s.r.o.

Polytex Composite, s.r.o., Karvina-Nove Mesto, Czech Republic Sulphurnet

Visual inpsection, dimensional check, hydrostatic test, documentation review Inspection 1 2015

Cold Drawn Precision Seamless Steel Tubes RAMT


JGC Gulf Engineering Co.Ltd.



JGC Gulf Engineering Co.Ltd.

Sampling and mechanical testing, NDT, chemical composition, final inspection, documentation review,packing inspection Inspection 2 2015

Ball Valves

Wasit Gas Plant Downstream Pipeline Project


Gulf Consolidated Contractors Co. Ltd. GCC MSA a.s.


Gulf Consolidated Contractors Co. Ltd. GCC

Hydrostatic tests, functional tests, documentation review Inspection 3 2015

Shuttle Drives Complete

Shiploader Replacement Carrington Terminal Project

Port Waratach Coal Services JACOBS

Sandvik and Construction Australia

C.H. Schafer Getriebe GmbH

C.H. Schafer Getriebe GmbH, Hauptstr.42, D-1896 Ohorn/Germany JACOBS

Visual inspection, name plate check, painting check, documentation review Inspection 1 2015

Castings Orion Roucka Slevarna Roucka Slevarna, Lutin, Czech Republic Orion

Cut of samples/lugs from castings for testing, marking, visual check, documentation review Inspection 5 2015

Ball Valves

06-FCP-196B New Metering Skid SASOL/Shell

Worley Parsons

Krohne Oil and Gas B.V.-The Netherlands MSA a.s.

MSA, Dolni Benesov, Czech Republic Worley Parsons


Vertical Suspended Closed Drain Pumps

A00/JP-7478/Closed Drain Systém

JIANNOU & PARASKEVAIDER (OVERSEAS) LTD LIBYA Flowserve, Austria

Flowserve, Austria, A 2345 Brunn/Gebirge, Austria

JIANNOU & PARASKEVAIDER (OVERSEAS) LTD LIBYA / TUV HELLAS

Factory acceptance tests(bearing temperature,performance test, vibration test, dismantling/strip down inspection, noise test Inspection 4 2015

Container for Evacuation Chute BP Technip

VIKING LIFE-SAVING EQUIPMENT AS

Ferram Strojirna, s.r.o.

Ferram Strojirna, s.r.o., Vávrovicka 275/89, 747 07, Opava , Czech Repubic Technip

cutting inspection, marking, assembling, welding, visual inspection, NDT before and after Load test check, Load test, painting activities, Final inspection, documentation review Inspection 16 2015

Boom, Lattice Boom Crane Kenz Figee Unex a.s.

Unex, Brnicko, Unicov, Czech Republic

Kenz Figee / ABS Consulting

Visual inspection after welding, material identification, final inspection, documentation review Inspection 4 2015

Castings - Non Slam Check Valves / Wedge

Satah Al-Razboot (SARB) Field Development Project – EPC PKG4 ADMA

Hyundai Engineering & Construction

ORION S.P.A Roucka Slevarna

Roucka Slevarna, Lutin, Czech Republic

Hyundai Engineering & Construction

Visual and dimensional inspection of raw material, castings, cutting of test blocks of discs (before mechanical test and chemical analysis), mechanical testing in laboratory, documentation review Inspection 6 2015

HI Turbine Assembly, HI Steam Turbine Unit 10

JAZAN IGCC Power Block Project

Saudi Arabian Oil Company (Saudi Aramco) SEPCO Siemens AG

Siemens AG, 45478 Mulheim, Germany

SEPCO / TUV Rheinland

Preservation, Packing, Transport and Storage of Steam Turbine and condeser components, documentation review Inspection 1 2015

Globe Valves, Check Valves, Gate Valves Donggi Project

REKIND-Donggi MSA a.s.

MSA, Dolni Benesov, Czech Republic REKIND-Donggi


Castings-Corpo Pompa , Corperchio corpa pompa

FindeR Pompe S.p.A

Vitkovicke Slevarny s.r.o.

Vitkovicke Slevarny s.r.o., Vitkovice, Czech Republic

FindeR Pompe S.p.A / DNV-GL Expediting 1 2015

Coupling Technip

EPT Emerson Power Transmission

GE Oil & Gas KOP-FLEX

KOP-FLEX, Piestanska 1202/44, 915 28 Nove Město nad Vahom, Slovakia GE Oil & Gas

Components balance with assembly balance, load couplings documentation review Inspection 1 2015

Casting - Nozzle chamber upper half Casting - Nozzle chamber lower half

CB&I Netherland

GE Oil & Gas

Vitkovicke Slevarny s.r.o.

Vitkovicke Slevarny s.r.o., Vitkovice, Czech Republic GE Oil & Gas

Dimensional check, documentation review Inspection 4 2015

Coupling NPCC/Technip

EPT Emerson Power Transmission

GE Oil & Gas KOP-FLEX

KOP-FLEX, Piestanska 1202/44, 915 28 Nove Město nad Vahom, Slovakia GE Oil & Gas

Non destructive examinations, load couplings, all torque transmitting components, residual unbalance check, load couplings assembled, unbalance repeatability check, interface dimensional check Inspection 3 2015

Vacuum Jacket pipes & valves

LIN LOX Phase I & GOX Phase II Flow Meters SABIC Schwanner GmbH

Schwanner GmbH, Burgikirchen,Germany SABIC

Visual inspection, marking check, leak test, final inspection, documentation review Inspection 1 2015

Boiler Suspension

Singapore Jurong Cogen Project

ExxonMobil Asia Pacific Pte Ltd

Foster Wheeler Italiana Srl

NEM, Seiko Flowcontrol GmbH

Seiko, Czech Republic

Seiko , 69671 Blatnice pod Svatym Antoninkem 866 Czech Republic

Foster Wheeler Italiana Srl

Visual check, dimensional check, identification/marking check, documentation review Inspection 1 2015

Valves Aramco Oversea Comapny SEPCO NEM

Emerson Process Management

Emerson, 8000 Székesfehérvár, Holland fasor 6, Hungary SEPCO Audit 1 2015

Combustion Air Preheater

Sohar Refinery Improvement Project

Oman Refineries and Petrochemicals Company LLC.

CB&I Lummus B.V.

Moravia-Apex, spol. s.r.o.

Moravia-Apex, spol. s.r.o., Olomoucka 7/9, Brno, Czech Republic

CB&I Lummus B.V.

Leakage test, Block Assembly, Dimensional check, Visual inspection, name plate check, NDT, Final inspection, Packing, Documentation review Inspection 3 2015

330 330 - MN-1105 00 V-1100 Sampler Hydrocyclone 330 330 - MN-1740 00 2nd Centrate Hydrocyclone

16100 - IBN SINA POLYOXYMETHYLENE PROJECT

Saudi Arabia Basic Industries (Sabic)

Innoweld Metalverarbeitungs GmbH

Innoweld Metalverarbeitungs GmbH, Industriepark, 8682 Mürzzuschlag-Hönigsberg Austria

Saudi Arabia Basic Industries (Sabic)

Final visual and dimensional inspection, hydrostatic test Inspection 1 2015

Hub Size 400 GE Oil & Gas V-Nass, spol, s.r.o.

V-Nass, spol, s.r.o., Ostrava-Vitkovice, Halasova 1a 706 02, Czech Republic GE Oil & Gas

Final inspection, Documentation review Inspection 1 2015

Antisurge Valves

Yamal LNG Project

Yamal LNG / Technip GE Oil & Gas CCI Italy


CCI Czech Republic s.r.o., Brno, Czech Republic Technip

Visual and dimensional control, Verification Name plate identification, Functional test Inspection 1 2015

Bale Valve

Eastern Goldfields pipeline

APA Group/APT Management Services Pty Ltd MSA a.s.

MSA, Dolni Benesov, Czech Republic APA Group

Welding activites check, hydrostatic test, functional test, final inspection including dimensional check, check of marking, documentation review Inspection 8 2015

Gate Valves

ALAŞEHİR 45 MW GEOTHERMAL POWER PLANT

Zorlu Endustriyel Ve Enerji Tesisleri Insaat Tic. AS MSA a.s.


Zorlu Endustriyel Ve Enerji Tesisleri Insaat Tic. AS

Pressure test, Functional test Inspection 12 2015

Desuperheaters

KEMYA-SEP-HALOBUTYL (HB) PROJECT

Saudi Arabia Basic Industries (SABIC)


CCI Czech Republic s.r.o., Brno, Czech Republic

Saudi Arabia Basic Industries (SABIC) Hydrostatic tests Inspection 3 2015

Fuel Gas Filtration Skids

Cormorant Alpha Platfor. TAQA Bratani,Integrated Services Con.

SPX Dehydration Process Filtration KPS Metal a.s.

KPS Metal a.s., Urbankova 231 Moravske Budejovice, Czech Republic

SPX Dehydration Process Filtration

Verification of punch lists, visual inspection, dimensional verification, leak test of assembled ackage, instrument wiring check, documentation review Inspection 3 2015

Multibore HUB Size 580, Female MB Hub Body, Machining IDD Chevron GE Oil & Gas V-Nass, spol, s.r.o.

V-Nass, spol, s.r.o., Ostrava-Vitkovice, Halasova 1a 706 02, Czech Republic GE Oil & Gas

Hardness testing, Final inspection, Documentation review Inspection 1 2015

Rotometers KEMYA


Brooks Instrument Ktf Sp. z.o.o.

Brooks Instrument Ktf, Berenyi str 72-100, H-8000 Szekesfehervar, Hungary


Visual inspection-quantities, identification, appearance, dimensions, Pressure test, Liquid dye penetrant examination, functional test, PMI, Document review Inspection 1 2015

Casings - Turbine upper and lower part CHILCA PLUS

DURO FELGUERA

SIEMENS Energy Žďas a.s.

Žďas a.s., Strojírenská 6,Žďár n/Sázavou, Czech Republic

DURO FELGUERA

Magnet particle tets of casting check, Ultrasonic test of casting check, Dimensional and visual check, Magnet particle test of casting after machinig, Documentation review Inspection 1 2015

Motor operated valve, Soft-seated, NPS24

Hadeed New Natural Gas Supply Metering Station


Pall Corporation MSA a.s.

MSA, Dolni Benesov, Czech Republic Pall Corporation

PIM, in- process (visual inspection after machinig, hydrostatic test, functional test etc.), painting activites check, Final inspection, Packing, Documentation review, Shipment Inspection 8 2015

Check Valves

Expand Shybah-ABQAIQ Pipeline Capacity – 1000MBCD


Br.C.A.T. International Co.LTD. MSA a.s.


Br.C.A.T. International Co.LTD.

PIM, in- process(visual inspection after machinig, hydrostatic test, functional test etc.), painting activites check, Final inspection, Packing, Documentation review, Shipment Inspection 8 2015

Check, Gate, Globe valves

E.14.4942 ARAMCO Al-Muajjiz Terminal Rehabilitation


BELLELI Energy s.r.l. MSA a.s.


BELLELI Energy s.r.l.

PIM, in- process(visual inspection after machinig, hydrostatic test, functional test etc.), painting activites check, Final inspection, Packing, Documentation review, Shipment Inspection 16 2015

PEDESTAL CRANE- Base Frame, Boom, Winches, A-Frame Ivar Aasen

Det Norske Oljeselskap ASA SMOE Pte Ltd

National Oilwell Varco Stalkon

Stalkon, Police Poland H. Cegielsky, Poznan Poland SMOE Pte Ltd

Painting activities check, Dimensional check, general surveillance, documentation review Inspection 14 2014




PIM, Visual inspection after machinig, Hydrostatic tests, Functional tests, Final inspection, Documentation review, Packing, Shipment Inspection 4 2014




PIM, Visual inspection after machinig, Hydrostatic tests, Functional tests, Final inspection, Documentation review, Packing, Shipment Inspection 4 2014

Steam Air Preheaters

MEJORA EFICIENCIA HORNOS

Repsol Petroleo, S.A

Tecnicas Reunidas

Benelux-Apex B.V.

Moravia-Apex, spol. s.r.o.

Moravia-Apex, spol. s.r.o., Olomoucka 7/9, Brno, Czech Republic

Tecnicas Reunidas

Visual inspection, Dimensional check, Name plate check, Painting check, Final inspection, Documentation Review Inspection 3 2014

Ammonium Sulphate Crystallization Unit. IEFCL PROJECT

INDORAMA ELEME FERTILIZER AND CHEMICAL LIMITED Toyo

Gea Messo Gmbh. Gea Technika

Gea Technika, Opole, Poland Toyo PIM Inspection 2014

Ammonium Sulphate Crystallization Unit. IEFCL PROJECT

INDORAMA ELEME FERTILIZER AND CHEMICAL LIMITED Toyo

Gea Messo Gmbh. Gea Technika

Gea Technika, Opole, Poland Toyo Expediting 4 2014

Drivers cabin, Machinery Houses

Ivar Aasen Development Project

Det Norske Oljeselskap ASA SMOE Pte Ltd

National Oilwell Varco ND Service

ND Service, Kontenerowa 30, 81-155 Gdynia, Poland SMOE Pte Ltd

Inspection fo mechanical completation for drivers cabin, Inspection of machinery houses Inspection 2 2014

Basket Seadrill (SHI) SGS Korea

National Oilwell Varco Hydro Naval

Hydro Naval, 76-270 Slupsk, Poland SGS Korea

Factory acceptance test, Final inspection, Documentation review Inspection 1 2014

Motor operated Choke Valve

ARABIYAH-HASBAH PLATFORMS AND POWER(BI 10-00916)


SAIPEM S.P.A. SHARJAH

CCI Valve Tehcnology GmbH


CCI Czech Republic s.r.o., Brno, Czech Republic AOC-H PIM

Monitoring Inspection 2014

Other Major assignments: (from 2005 till 2014)

TRANSFORMATOR

Client: TECHNIP, FRANCE

Vendor: SIEMENS, FEROKOTAO, CROATIA

Project: 61246X MARTIN LINGE TOPSIDES EPSCC

Check of start painting activities – painting according to Norsok M 501 + Technip

requirements, check of surface preparation before blasting, check of surface

preparation after blasting, bresel test, roughness test, dust test, check of blasted

surface according to comparator, check of environment before painting, check of

painting activities-first layer, second layer, final coat; check of final paint surface and

check of DFT; release transformator for shipment; issueing of IRN, check of final

documentation

PUMP

Client: POSEIDON RESOURRCES, USA

Vendor: FLOWSERVE, Madrid, Spain

Project: CARLSBAD

Performance test – check of vibration, noise, bearing temperature, flow, guaranteed

point, discharge pressure Pd, operation speed, electrical parameter, identification,

used base material, diameters according to drawing

RISER CLAMPS, CAP BEAMS

Client: SAIPEM SA

Vendor: MHF, STELLENDAM,ROTTERDAM, Netherlands

Project: ENI CG, Litchendjili WP4-OUT, CG, ENI CG, Litchendjili WP10,CG

Check of all materials for assembling of structure ase per appl WPS, verify roll

forming operation + (strain age) tests, assembling/fitting capped beams according to

drawings including dimensional control + fit up control, monitoring welders during

production to confirm welding is according to WPS, visual inspection of welds on

weld completion, requesting NDE of welds according to NDT client’s requirements,

confirmation all NDE are comlete and accepted, final check, check of dimensions

and geometry, check of cold vulcanisation of the clamps and tests, release structure

for protective coating, check of coating report with DFT measurements, check of

vulcanisation reports, final inspection and compiling of all documents and

manufacturing record book, issueing of release note, check of shipping documents

RUBBER COATING

Client: TENARIS

Vendor: TRELLEBORG OFFSHORE NORWAY, Norway

Project: OFON Phase 2 Project

Check of full traceabilty according to procedure, check of girt blasting, visual

inspection before and after blasting; check of air temperature, relative humidity, steel

temperature, check of salt test, check of roughness, surface cleanliness, UV inspection,

check of dust level, check of application of primer/rubber cement, check of

identification number-clearly legible, check of primer batch, check of rubber coating –

layer by layer, check of nylon tape wrapping, check rest of time before vulcanisation,

check of curing, cure according to pre-set program, visual inspection after

vulcanisation, testing and measuring – hardness test outer layer, coating thickness,

holiday test, adhesion test on test plate, hammer test, limited CD test, CD test, signing

of release note, packing and preparations for transport, check of final documentation

AIR PREHEATERS

Client: WORLEY PARSON, AUSTRALIA

Vendor: BENELUX-APEX GROUP, MORAVIA-APEX,BRNO

Project: CLEANESE PROJECT FAIRWAY

PIM, check of production – fit up, welding, NDT activities, painting, hydrostatic test

(leak test), final inspection (dimensional check, visual check, review documentation,

issueing of inspection release note, packing check); check of adhesion of painting and

thickness of painting

AIR ORE-HEATER

Client: KBR, USA


Project: DYNO F441 NOBEL LOUISIANA AMMONIA PROJECT



issued inspection release note, packing check); check of dry film thickness of painting

AIR ORE-HEATER

Client: KBR, USA


Project: DYNO F441 NOBEL LOUISIANA AMMONIA PROJECT



issued inspection release note, packing check); check of adhesion of painting and

thickness of painting

CHOKE CONTROL VALVES

Client: ABU DHABI DEVELOPMENT CO.Ltd

Vendor: CCI, Czech Republic

Project: Shah Gas Development (SGD) Program

Final inspection, check of welding procedure (WPS,WPQR), qualification welder

(WQR), NDE procedures, NDT qualification,Check of basic/secondary materials,

material certificates, check of NDT protocols (PT,RT), check (witness) of Factory

acceptance test – Hydrostatic pressure test, seat leakage test, functional test, fugitive

emission production test; check of painting of valve and check of conservation,

crating, marking before shipment; check of holiday test of painting, adhesion of

painting

OIL SEPARATOR

Client: FLUOR

Vendor: EM Polar, Czech Republic

Project: BASF TDI Refrigeration Units

Final inspection, check of welding procedure (WPS,WPQR), qualification welder


material certificates, check of NDT protocols (PT,RT); check(witness) of hydrostatic

pressure test and check of leakage test; check of painting of vessel, check of adhesion

of painting

XT CAS CASTING UPPER & LOWER

Client: TECHNIP

Vendor: ŽĎAS, Czech Republic

Project: 2408 ETILENO XXI

Final inspection, check of mechanical testing result, check of MT, UT, RT

examinations, documentation review, visual and dimensional check

MECHANICAL SEAL

Client: TECHNIP

Vendor: JOHN CRANE, Czech Republic

Project: ETILENO XXI

Final inspection, visual and dimensional check, check of quality control

manufacturing dossier

PIPE, 8 IN NPS x LONGITUAL WELDED

Client: ARAMCO OVERSEAS COMPANY BV

Vendor: SOSTA, Germany

Project: SOURCE

PIM-verification of manufacturer possibility for manufacture pipe according SA

procedures

PRESSURE VESSELS – STILL COLUMN,REFLUX CONDENSER

Client: TALISMAN ENERGY

Vendor: STREICHER, Slovakia

Project: MONTROSE BLP

Final inspection,Check of welding procedure (WPS,WPQR), qualification welder

(WQR), NDE procedures, NDT qualification, check of basic/secondary materials,

material certificates, check of NDT protocols (PT,RT); check(witness) of hydrostatic

pressure test and check of pad leakage test

DRIVEC SKID LEFT/RIGHT HAND, TORQUE TUBE SKID

Client: TALISMAN ENERGY

Vendor: UNEX, Czech Republic

Project: MONTROSE BLP

Check during manufacture – assembling, welding,painting(after blasting); final

inspection, check of welding procedure (WPS,WPQR), qualification welder (WQR),

NDE procedures, NDT qualification, check of basic/secondary materials, material

certificates, check of NDT protocols (PT,RT); check of holiday test of painting,

adhesion of painting and thickness of painting and salt on surface

BALL VALVES

Client: PT REKAYASA INDUSTRI

Vendor: MSA, Czech Republic

Project: EPCIC OF THE PIPELINE SYSTEM FOR PAMPUNG LNG

FLOATING STORAGE AND REGASIFICATION FACILITIES

Inspection – verification of raw material, issued certificate 3.2. for base material,

check of mechanical testing in laboratory, pressure test and functional test, final

dimensional check, check of final visual and marking, cleaning, painting, protection,

packing, review of the documents generated, usued release note for shipment; check of

adhesion of painting and thickness of painting

AIR INTAKE FILTER

Client: ROLLS-ROYCE ENERGY SYSTEM

Vendor: AXIS, Czech Republic

Project: M.A677-Kinabalu

Final inspection,Check of welding procedure (WPS,WPQR), qualification welder


material certificates, check of NDT protocols (PT,RT); visual check surface after

passivation/pickling of welds, dimensional check of basic dimensions

STEM EXTENSION

Client: GE OIL & GAS

Vendor: V-NASS, Czech Republic

Project: KIZOMBA Satellites Phase 2 Project

Final inspection, witness of PMI tests, documentation review; check of adhesion of

painting and thickness of painting

FORGINGS


Vendor: ŽĎAS, Czech Republic

Project: KIZOMBA Satellites Phase 2 Project

Final inspection, hardness test, ultrasonic test, documentation review

PUMP CASING - DRY COOLING WATER SYSTEM Client: SK Engineering & Construction Co., Ltd

Vendor: ASG Hydro Ltd, Hungary Project:TUFANBEYLI Thermal Power Plant Hydrostatic test

OIL SUPPLY UNIT, OVERHEAD TANK GN 600 Client: JACOBS ENGINEERING S.A.

Vendor: HYDAC, Poland

Project: ODI Project

RUN TEST, visual check, dimensional check, documentation check, check of paint

WET GAS VENTURI METER

Client:EXXONMOBIL EXPLORATION AND PRODUCTION MALAYSIA

Vendor: SEIKO FLOW CONTROL,Czech republic

Project: DAMAR-A Project

Check the documentation status related to QA/QC document ,ITP, test procedure and

welding procedure; check and verify material availability, obtain suborders, check of

arrival date for the outstanding materials, check of start date of fabrication, date for

completion, check of adhesion of painting and thickness of painting

FEED FILLTER, RESIN TRAPS,PUMPS FILTER / PRESSURE VESSEL Client: FAUDI

Vendor: CKD CHLAZENÍ, Czech Republic

Project: MOZYR OIL REFINERY Review of drawing, review of weld procedure(WPS,WPQR), material control

including material test certificate, visual check of weld joints on tack welded

conditions, welding process, check of completeness on finished components, visual

examination of the weld joints, dimensional check and check material stamping, post

welded heat treatment report, hydro test, dryling, air-leaktest; check of adhesion of

painting and thickness of painting

FAIRLEAD

Client: DAEWOO SHIPBUILDING & MARINE ENGINEERING

Vendor: ELFE, s.r.o., Czech Republic

Project: SONGA Project

Final inspection - dimensional check, check of final visual and marking, cleaning,

painting according Norsok, protection, packing, review of the documents generated,

usued release note for shipment

HUB´s


Vendor: V-NASS, Czech Republic

Project: KIZOMBA SATELLITES PHASE 2 Project

Weld cladding

CATALYST FILTER/PRESSURE VESSELS

Client: DAELIM

Vendor: SAM, Slovakia Republic

Project: SADARA ISOCYANATES PLANT Project

Pre-inspection meeting, PMI, verification of raw material, product traceability,

dimensional check, check of assembly, check of welding, visual check, check of

hydrostatic pressure test, check of NDT(VT,PT,RT), review of the document; check of


GATE VALVES

Client: CONOCOPHILLIPS INC. LTD

Vendor: MSA, Czech Republic

Project: DEGC, DC-1 & CGPX Project

Inspection – PMI, verification of raw material, pressure test and functional test, final

dimensional check, check of final visual and marking, cleaning, painting, protection,

packing, review of the documents, issueing of release note for shipment; check of


SUPPLY OF DRY VACUUM PUMP

Client: TOYO

Vendor: EDWARDS, Czech Republic

Project: EEP2 Project

Expediting – check of manufacturing equipment, manufacturing premises, state of

equipment, possibilities of manufacturing, approving of drawing documentation,

availability and traceability of base material, manufacturing plan-in process; check of


SEAMLESS UMBILICAL COILED TUBING

Client: TECHNIP/CHEVRON AUSTRALIA PTY LTD.

Vendor: SANDVIK, CHOMUTOV

Project: WHEATSTONE SUBSEA INSTALATION

Verification (witness, monitoring, review) of ladle analysis, product traceability,

incoming inspection of hollows into pilgering line, pilgering, ID & OD degreasing and

cleaning, cleanliness check before final heat treatment, heat treatment qualification,

heat treatment, straightening, belt polishing, NDE and visual inspection of straight

tubes, eddy current testing, ultrasonic testing for surface and subsurface defects,

measurement of the main dimensions by UT, marking and traceability, final inspection

of tubes, positive material identification (PMI), burst test, product analysis, tensile

test, hardness test, flattening test, flaring test, pitting corrosion test, ferrite content,

microstructure test, release to the next processing, WPQR /WPAR, approval of WPS/

WPAR, production test welds, liquid penetrant testing of the welds, radioscopy of the

weld, visual inspection of the welds, coiling of the tubes, packing of coil; packing of

straight tubes, final documentation/ QA releasing

STEAM AIR PRE HEATER

Client: LHT (CB&I)


Project: KOMSOMOLSKY REF.HYDROCRACKING COMPLEX

Hydrostatic test (leak test), final inspection (dimensional check, visual check, review

documentation, issued inspection release note, packing check); used standards ASME

IX, ASME VIII,division 1, NDT according to AWS D1.1, ITP of client, internal

specification of client or supplier´s specification approved by client; check of adhesion

of painting and thickness of painting

COMBUSTION AIR PREHEATER

Client: CB&I (LHT)


Project: KNPC(Kuwait national petroleum co. ) HYDROGEN PLANT

Hydrostatic test (leak test), final inspection (dimensional check, visual check, review

documentation, issueing of inspection release note, packing check); used standards

ASME IX, ASME VIII, division 1, NDT according to AWS D1.1, ITP of client,

internal specification of client or supplier´s specification approved by client; check of


BALL MILL SYSTEM(CLASSIFIER FEED TANK), 2 OFF CLASSIFIE

FEED PUMPS

Client: ALSTOM S&E AFRICA (PTY) LTD

Vendor: CHRISTIAN PFEIFFER MASCHINEFABRIK, AUSTRIA

Packing inspection (packing and marking); review of QC documentation book

GATE VALVES, BALL VALVES

Client: ELECNOR MEXICO, GS KICO ENGINEERING

Vendor: MSA

Inspection – pressure test and functional test, final dimensional check, check of final

visual and marking, cleaning, painting, protection, packing, review of the documents,

issueing og release note for shipment; check of adhesion of painting and thickness of

painting

HEAT EXCHANGER

Client: ALSTOM POWER

Final inspection, PT examination, visual examination, dimensional examination,

leaking test; check of adhesion of painting and thickness of painting

MAIN PIPE LINE, LINE VALVE STATIONS – project Gazella

Client: NET4GAS

Vendor: Denys and Alpine

Mechanical supervisor for stations – preheating check, including temperature

measurement during the welding, check of WPQR, WPS, check of welding

electrodes, wire, documentation inspection, check of welders, check of repairs,

inspection of NDT procedures and personnel-certificates, check of equipment

calibration, check of pressure test, expediting of all parts (base material, assembling,

manufacturing, preparation for shipment), check of holiday test of painting, adhesion


HEAT EXCHANGER

Client: VITKOVICE POWER ENGINEERING



HAB SIZE, CAP SIZE, WPQ RING, FLANGE API

Client: BP Exploration (Caspian Sea) Limited

Vendor: ŽĎAS Metallurgy

Final inspection – mechanical completion check/approval, manufacturing record book

approval, heat treatment – quenching, austenising, tempering, mechanical testing,

dimensional control

WET GAS VENTURI METER

Client: ExxonMobil Exploration And Production Malaysia Inc.

Vendor: Seiko Flowcontrol

Expediting – check of manufacturing equipment, manufacturing premises, state of

equipment, possibilities of manufacturing, approving of drawing documentation,

availability and traceability of base material, manufacturing plan-in process, WPS,

PQR/WPQR, NDT procedures, qualification of NDT workers and welders, list of

subsupliers; check of adhesion of painting and thickness of painting

HEAT EXCHANGER

Client: STROJON



STEAM AIR PREHEATOR

Client: SK engineering&construction, Korea republic

Vendor: Moravia – Apex, Czech republic

Final inspection before packing, leak test of blocks, PT examination, visual

examination, dimensional examination; check of adhesion of painting and thickness

of painting

COMBUSTION AIR PREHEATER

Client: Kuwait national petroleum company, Kuwait

Vendor: Moravia - Apex, Czech republic

Final inspection, PT examination, visual examination, dimensional examination;

check of adhesion of painting and thickness of painting

HEAT EXCHANGER

Client: KRALOVOPOLSKA



AIR PREHEATER

Client: SBM offshore, Netherland

Vendor: Ingersoll-rand, Czech republic

Compresor performance test

PRESSURE VESSEL

Client: NET4GAS, CZECH REPUBLIC

Vendor: GAZGEP, HUNGARY

Pressure test

PUMPS for MOCHOVCE NUCLEAR POWER PLANT UNIT 3,4

Client: Slovenske Eleketrarne a.s.

Vendor: Sigma Engineering s.r.o.

Inspection of dynamical and statical balancing test of rotors

PUMPS for MOCHOVCE NUCLEAR POWER PLANT UNIT 3,4

Client: Slovenske Eleketrarne a.s.

Vendor: Sigma Engineering s.r.o.

Inspection of hydrostatic tests of suction body and discharge body, performance tests,

final inspection – check of dimension, visual, packing, documentation; check of


STERN ROLLER BOX, STINGER ROLLER BOX

Client: Suebsea 7, United Kingdom

Vendor: Huisman Konstrukce, Czech republic

Factory acceptance test

GATE VALVES

Client: Saipem, Italy

Vendor: Šmeral Brno, Czech republic

Visual examination of casting, certificate material check, magnetic examination

CHIMNEY

Client: La Gaz Integral, France

Vendor: Steelcon, Slovakia

Pre-inspection meeting, certificate base material check, WPS-WPQR check, check

of preparation for painting; check of adhesion of painting and thickness of painting

A-FRAME, BASE FRAME, PEDESTAL, BOOM

Client: Sparrows, Scotland

Vendor: Zamtet Industry, Poland

Inspection of manufacturing, supervising of welding procedure, check of adhesion


GUIDE CONE OB VCS 12´´

GUIDE CONE IB VCS 12´´

Client: Total E & P Angola

Vendor: Zamtet Industry, Poland

Final inspection, MCCR, full traceabilty chceck, review QC records, visual

examination; check of adhesion of painting and thickness of painting

GUIDE CONE IB VCS 12´´

Client: Total E & P Angola

Vendor: In-Bul, Poland

Dimensional examination

BEARING FRAME, FRAME FOR DRIVE

Client: Inco engineering

Vendor: Unex a.s.

Processing of drawing and welding documentation according to EN; supervising of

welding procedures

HEAT EXCHANGER

Client: UNEX



PINION, RING

Client: Power-station Opatovice, a.s.

Vendor: Unex a.s.

Processing of drawing and welding documentation according to CSN; supervising

of welding procedures

DISCHARGE ROD FOR COKING BATTERY

Client: Power-station Opatovice, a.s.

Vendor: Unex a.s.

Processing of drawing and welding documentation according to CSN; supervising


SPARE PARTS FOR CRANE-40t

Client: ČEZ a.s.

Vendor: Unex a.s.


welding procedures

OVERHAUL OF STEEL CONSTRUCTION FOR TRANSFORMER

VESSEL 300MV

Client: ETD Transformer, a.s.

Vendor: Unex a.s.


welding procedures

TRANSFORMER KETTLE 600KV

Client: Siemens Power Transmission and Distribution

Vendor: Unex a.s.


welding procedures.

9E BASE FRAME, OFFSHORE PLATFORM

Client: GE EPE, France

Vendor: Unex a.s.

Processing of drawing and welding documentation according to ASME; supervising


TRANSFORMER KETTLE Storebelt

Client: Siemens AG, Energy Sector

Vendor: Unex a.s.


welding procedures

MAIN GIRDES

Client: Kalmar Industries BV

Vendor: Unex a.s.

Inspecting of quality and supervising of welding procedures

LONG TRAVEL ARRANGEMENT

Client: Sandvik Mining Construction

Vendor: Unex a.s.


BOOM , OFFSHORE PLATFORMS

Client: National Oilwell Norway AS

Vendor: Unex a.s.

Processing of drawing and welding documentation according to NORSOK M101;

Supervising of welding procedures

PARTS OF EOT CRANE 150t x 37,4m

Client: Konecranes Schwerlastkrane GmbH

Vendor: Unex a.s.


LOWER BEAM, LOWER CROSSBAR, FRAME SUPPORT

Client: Disa Industries A/S

Vendor: Unex Slovakia – factory Snina


COLUMN

Client: Viastore system GmbH

Vendor: Unex a.s.


BASE FRAME

Client: Keenz Figee

Vendor: Unex a.s.

Processing of drawing and welding documentation according to AWS D1.1.;

supervising of welding procedures

BASE FRAME + ACCESSORIES

Client: MacGregor Hydramarine

Vendor: Unex a.s.


Date: 11/4/2016

Dipl. Ing. Pavel Gregor

CV_Gregor,P,rev.2, 13.4.2016

Documents

Transcript of CV_Gregor,P,rev.2, 13.4.2016