Customer Expectations Document - Canon Global · 2019. 1. 18. · Customer Expectations Document ....

Customer Expectations Document

Version 11

Engineering Services and Solutions Division

Business Information Communications Group, Canon U.S.A., Inc.

varioPRINT 140 Series Customer Expectations Document

Version 11 varioPRINT 140 Series Customer Expectations Document Page 2

Contents 1. Introduction ................................................................................................................. 6 2. Product Overview ....................................................................................................... 7

2.1 Summary of Functions ........................................................................................ 8 2.2 Offset Press vs. DirectPress .............................................................................. 8 2.3 Standard Configuration....................................................................................... 9 2.4 PRISMAsync Controller .................................................................................... 10

2.4.1 PRISMAsync Features ....................................................................... 11 2.4.2 PRISMAsync Standard Licenses ....................................................... 13 2.4.3 PRISMAsync Optional Licenses......................................................... 13 2.4.4 PRISMAsync System Backup ............................................................ 14 2.4.5 PRISMAsync Firmware Updates ........................................................ 14

2.5 Professional Input/Output Accessories ............................................................ 15 3. Machine Dimensions and Space Requirements .................................................. 18

3.1 Dimensions ....................................................................................................... 18 3.2 Weight ............................................................................................................... 20 3.3 Dimensions Diagrams ...................................................................................... 21 3.4 Floor Structure Requirements .......................................................................... 26

4. Power/Electrical Requirements .............................................................................. 27 4.1 Power Requirements for the Main Unit and Optional Accessories ................. 28

5. Environmental Factors and Requirements ........................................................... 30 5.1 Temperature and Humidity Conditions ............................................................ 30 5.2 Temperature Gradient ...................................................................................... 30 5.3 Ventilation ......................................................................................................... 30 5.4 Lighting .............................................................................................................. 31 5.5 Sunlight ............................................................................................................. 31 5.6 Ammonia ........................................................................................................... 31



6. Specifications ........................................................................................................... 32 6.1 Main Unit ........................................................................................................... 32 6.2 PRISMAsync Controller .................................................................................... 34

6.2.1 USB Stick ............................................................................................ 35 6.3 Duplex Color Image Reader-L1 with Feeder ................................................... 36 6.4 Color Image Reader-K1 (For Print Only) ......................................................... 36 6.5 ePIM-D1 ............................................................................................................ 37 6.6 Bulk Tray Small Format .................................................................................... 37 6.7 Output Tray ....................................................................................................... 38 6.8 Document Insertion Unit-N1 ............................................................................. 38 6.9 High Capacity Stacker-H1 ................................................................................ 39 6.10 Paper Folding Unit-J1 ....................................................................................... 39 6.11 Staple Finisher-W1 ........................................................................................... 40 6.12 Booklet Finisher-W1 ......................................................................................... 44 6.13 Puncher Unit-BS1 ............................................................................................. 48 6.14 Multi Function Professional Puncher-B1 .......................................................... 49 6.15 Booklet Trimmer-F1 .......................................................................................... 49 6.16 Two-Knife Booklet Trimmer-A1 ........................................................................ 50 6.17 SDD Square Fold Booklet-Maker with Two-Knife Trimmer ............................. 51 6.18 SDD Square Fold Booklet-Maker ..................................................................... 52 6.19 SDD BLM300C Professional Booklet Maker ................................................... 53

6.19.1 SDD Front Trimmer BLT6989 Specifications..................................... 53 6.19.2 SDD 2-Knife Trimmer STR6702 Specifications ................................. 54 6.19.3 SDD Square Fold SFM6904 Specifications ....................................... 54 6.19.4 SDD Rotator RTM6940 Specifications ............................................... 55 6.19.5 SDD Long Belt Stacker BST6800 Specifications .............................. 55 6.19.6 SDD Short Belt Stacker BST6900 Specifications .............................. 55

6.20 PowerLift ........................................................................................................... 56 6.21 Decurler Unit-C1 ............................................................................................... 56 6.22 MAX Ring Binder .............................................................................................. 57 6.23 Plockmatic BLM 50/35 Professional Booklet Maker ........................................ 58

6.23.1 Plockmatic Trimmer FTR50 Specifications ........................................ 58 6.23.2 Plockmatic Book Fold BF50 Specifications ....................................... 59 6.23.3 Plockmatic Cover Feeder CF50 Specifications ................................. 59 6.23.4 Plockmatic Belt Stacker BST4000-1 Specifications .......................... 59

6.24 GBC eWire Pro Wire Binding System .............................................................. 60 6.24.1 Binding Specifications......................................................................... 60 6.24.2 Bypass Specifications ......................................................................... 61

6.25 DFD Adapter and Bridge .................................................................................. 62 6.25.1 DFD Adapter-A1 Specifications.......................................................... 62 6.25.2 Finisher Bridge-A1 Specifications ...................................................... 62

7. System Options and Software ................................................................................ 63 7.1 Removable HD Kit-C1 ...................................................................................... 63 7.2 PRISMAdirect ................................................................................................... 63 7.3 PRISMAprepare ................................................................................................ 63 7.4 Other Canon varioPRINT 140 Series Software Optional Licenses ................ 64



8. Safety Notifications .................................................................................................. 65 8.1 Canon varioPRINT 140 Series Safety Notification .......................................... 65 8.2 High Capacity Stacker-H1 Safety Notification ................................................. 65

9. Installation Review ................................................................................................... 66 9.1 Installation Time ................................................................................................ 66 9.2 Customer Responsibilities ................................................................................ 67

10. Printer Operation Care ............................................................................................. 68 11. Consumables ............................................................................................................ 69

11.1 Consumable Parts ............................................................................................ 69 11.1.1 Estimated Life of Consumables.......................................................... 70

12. Toner Container and Toner Supply Unit Yields ................................................... 70 13. Optimum Monthly Product Performance .............................................................. 71 14. Machine Productivity ............................................................................................... 72

14.1 Print Speed ....................................................................................................... 72 14.2 Average Print Speed per Hour ......................................................................... 74 14.3 Mixed Media Productivity.................................................................................. 76 14.4 Paper and Toner ............................................................................................... 76

15. Media Usage/Compatibility ..................................................................................... 77 15.1 Media Characteristics by Media Library Parameters ...................................... 77 15.2 Media Specific Adjustments ............................................................................. 78 15.3 Advanced Media Settings ................................................................................. 79 15.4 Paper Handling and Storage ............................................................................ 80 15.5 Selecting the Correct Media ............................................................................. 81 15.6 Note for Customers Who Cut Their Own Paper .............................................. 81 15.7 Paper Sizes and Feed Location Chart ............................................................. 82

16. Responsibility Matrix ............................................................................................... 83



IMPORTANT The purpose of this Customer Expectations Document is to explain the current features and capabilities of the Canon varioPRINT 140 Series, and provide customers information about what to expect before purchasing the machine. The information included in this document has been pulled from various sources, including product reference guides, service guides, and user manuals. Specifications and other information contained herein may vary slightly, and in a non-material way, from actual device values, including those found in advertising and other printed matter. Part numbers, yield information, and specifications are subject to change without notice. Accordingly, the latest specifications for the machine may not be found in this document. As new information becomes available, this document will be revised. Canon authorized dealers can access the latest revision of this document from the Download Center page on the e-Support Web site (support.cusa.canon.com).

DISCLAIMER NEITHER CANON NOR ITS SUPPLIERS NOR ANY AUTHORIZED SERVICE PROVIDER SHALL BE LIABLE FOR PERSONAL INJURY OR PROPERTY DAMAGE (UNLESS CAUSED SOLELY AND DIRECTLY BY THE NEGLIGENCE OF CANON OR ANY AUTHORIZED SERVICE PROVIDER), LOSS OF REVENUE OR PROFIT, FAILURE TO REALIZE SAVINGS OR OTHER BENEFITS, EXPENDITURES FOR SUBSTITUTE EQUIPMENT OR SERVICES, LOSS OR CORRUPTION OF DATA, INCLUDING, WITHOUT LIMITATION, DATA STORED ON THE PRODUCT’S HARD DISK DRIVE, STORAGE CHARGES OR OTHER SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES CAUSED BY THE USE, MISUSE OR INABILITY TO USE THE PRODUCT, REGARDLESS OF THE LEGAL THEORY ON WHICH THE CLAIM IS BASED AND EVEN IF CANON OR ITS SUPPLIERS OR ANY AUTHORIZED SERVICE PROVIDER HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. NOR SHALL RECOVERY OF ANY KIND AGAINST CANON OR ITS SUPPLIERS OR ANY AUTHORIZED SERVICE PROVIDER BE GREATER IN AMOUNT THAN THE PURCHASE PRICE OF THE PRODUCT CAUSING THE ALLEGED DAMAGE. WITHOUT LIMITING THE FOREGOING, THE PURCHASER ASSUMES ALL RISKS AND LIABILITY FOR LOSS, DAMAGE OR INJURY TO PERSONS AND THE PROPERTY OF THE PURCHASER OR OTHERS ARISING OUT OF THE POSSESSION, USE, MISUSE, OR INABILITY TO USE THE PRODUCT NOT CAUSED SOLELY AND DIRECTLY BY THE NEGLIGENCE OF CANON OR ANY AUTHORIZED SERVICE PROVIDER. Copyright 2019 by Canon U.S.A., Inc. All rights reserved. Product and company names used herein are, or may be, the registered trademarks or trademarks of their respective owners.

http://www.support.cusa.canon.com/



1. Introduction The Canon varioPRINT 140 Series Customer Expectations Document contains information about the features and capabilities of the Canon varioPRINT 140 Series. This document should be used as part of the presale and preinstallation planning processes to help clarify the requirements and responsibilities associated with supporting, owning, and operating the Canon varioPRINT 140 Series. It is also recommended that those interested in purchasing the Canon varioPRINT 140 Series have, and familiarize themselves with, the information in this document prior to making their purchase. Version 11 adds information regarding risk of toner abrasion.

IMPORTANT The uniFLOW applet is supported with the latest release of PRISMAsync V6.3.



2. Product Overview The Canon varioPRINT 140 Series brings the following capabilities to users in a high-volume, light- to mid-production environment, including commercial printers, Print-for-Pay, graphic arts, and CRD customers: • Printing/copying speeds of up to 140 ipm (images-per-minute)1 duplex and up to

120 ipm simplex for the varioPRINT 140 model (LTR, and B&W (Black-and-White)).

• One integrated 15” full-color touch screen operator panel for the total system. • One media catalog for the total system. • Prints up to 600 x 2,400 dpi (dots per inch). This results in higher quality

characters, smoother corners, and cleaner gradient transitions. Text appears sharper, and graphics appear clear and detailed.

• Copies up to 600 x 1,200 dpi. • Scans in up to 600 x 600 dpi. • Dust-free toner filling and virtually no waste toner or ozone is generated. • Vacuum feed2, air separation2, HeatXchange technology, ScreenPoint

technology, DirectPress technology, and EnergyLogic technology ensure reliable media handling from up to 13 lb bond to 110 lb cover (50 to 300 g/m2).

• PRISMAsync controller offers scheduling feedback software for production planning on the user interface for up to 8 hours.

• Optional operator’s attention light with adjustable “warn-ahead” timing. • POC (Printer Operation Care) enables the operator to safely replace certain parts,

increasing uptime. • Support for the optional SDD BLM300C Professional Booklet Maker and bulk

paper tray for A5 and Statement size paper.

IMPORTANT • There is a risk of toner abrasion with all toner-based printing technologies. The

risk is highest with friction fed finishing or inserting equipment. We recommend that a customer runs test prints on their media through their offline finishing and inserting equipment prior to purchase. Please consult your authorized Canon Dealer and Canon Production Sales Consultant for sample prints for testing.

• Friction fed finishing is not recommended due to the risk of slight toner abrasion. • When running certain applications, which contain large areas of heavy coverage

of solid black toner, the user may observe some minor density changes from the lead edge to trail edge on the print.

NOTE The Plockmatic BLM 50/35 Professional Booklet Maker supports only uncoated media when installed with the varioPRINT 140 Series.

1 An image is defined as any text, graphics, or combination of the two, that fits onto one side of a single sheet (or

page) of LTR paper. Therefore, a printing/copying speed of approximately 140 ipm in the duplex mode equates to approximately 70 sheets-per-minute.

2 When optional ePIM is installed.



2.1 Summary of Functions

Function Canon varioPRINT 140 Canon varioPRINT

130 Canon varioPRINT

115

Print Speed (LTR) B&W Up to 140 ipm3 4 Up to 130 ipm3 4 Up to 115 ipm

Scan Speed (300 dpi, LTR)

Simplex and Duplex, B&W and Color5

Up to 120 ipm

Scan Speed (600 dpi, LTR)

Simplex and Duplex, B&W

Up to 108 ipm

Simplex and Duplex, Color5

Up to 25 ipm

Scan Speed (600 x 300 dpi, LTR)

Simplex and Duplex, Color5 Up to 120 ipm

DADF Standard duplex automatic document feeder DADF Capacity 300 sheets (20 lb bond (80 g/m²)) Print Resolution Up to 600 x 2,400 dpi Copy Resolution Up to 600 x 1,200 dpi Scan Resolution Up to 600 x 600 dpi Gradations 200 levels

Paper Size Minimum 5.5” x 7.2” (140 mm x 182 mm) Maximum 12.6” x 19.2” (320 mm x 488 mm) Paper Weight 13 lb bond to 110 lb cover (50 to 300 g/m²) Maximum Printable Area 12.1” x 19.1” (308 mm x 484 mm) Controller Standard PRISMAsync Controller Controller HDD Capacity 500 GB Controller Memory 4 GB Security E-Shredding license enabled on the PRISMAsync controller Copy Standard Scan Standard for B&W5 Print Standard Network Standard Ethernet 10Base-TX/100Base-T/1000 Base-TX

2.2 Offset Press vs. DirectPress

Offset printing is a technique that transfers (or “offsets”) an inked image from a plate to a rubber blanket, and then to the printing surface. This enables the offset press to maintain a consistent and high-image quality over long print runs because the plate never touches the paper. The process requires a substantial investment in equipment and setup expenses to achieve these results. DirectPress converts digital data into a toner image in a single step. This compact process is unaffected by temperature, static, or humidity. Therefore, it offers stable performance while producing no ozone or waste toner.

3 When equipped with the Multi Function Professional Puncher-B1, maximum speed in simplex is limited to 120

images per minute. Full engine speed is supported in duplex and pass-through. 4 When equipped with the Document Insertion Unit-N1 or the Paper Folding Unit-J1, maximum speed in simplex is

limited to 110 images per minute. 5 To scan in color, the optional Color Scan to File/E-Mail-C1 license must be installed.



2.3 Standard Configuration The standard configuration for the Canon varioPRINT 140 Series main engine includes: • Canon varioPRINT 140 Series main unit • Duplex Color Image Reader Unit-L1 or Image Reader Unit-K1 • Operator panel • PRISMAsync controller (embedded in the main unit) • Ethernet connection (via the PRISMAsync controller) • USB connection (via the operator panel) The Canon varioPRINT 140 Series supports the Remote User Interface-C1 as optional software. The Remote User Interface-C1 license enables users to access the status window of the machine remotely from any computer on the same network. The remote information that is provided includes: • The current machine status. • A fixed timeline of up to 30 minutes with a moving bar below it that shows the

time left for all print jobs to complete.

IMPORTANT The customer must purchase the Canon varioPRINT 140 Base License with or without POC (Printer Operation Care). For more information on POC, see “Printer Operation Care,” on p. 68.



2.4 PRISMAsync Controller The Canon varioPRINT 140 Series is powered by the PRISMAsync Print Controller. The PRISMAsync controller seamlessly enables the customer to streamline their workflow and turn out more work in less time with the following features: • Scheduler - Plan-ahead functionality for multiple jobs simultaneously. The

scheduler only shows an estimated job completion time, not the actual time it may take to complete a job. The actual job completion time may vary, depending on mixed media jobs, mixplex jobs, and selected Finishing settings.

• A waiting and scheduled jobs queue and printed jobs archive. • One queue and job management for printing and copying. • Streaming (spooling, RIPing, printing, and cleaning up simultaneously). • Multiple standard and customizable workflow profiles. • Media-based operation with PRISMA media catalog. • PRISMAsync controller settings are accessible via a Web browser. • Calibration per media family and halftone. • USB printing and Scan to USB functionality*1. To use the Scan to USB function,

the Scanning license must be activated, and the optional Duplex Reader-L1 must be attached to the machine.

• Workflow automation via SMB, LPR (Line Printer Request) queues, and optional PDF/PS hot folders, as well as driver templates.

• Supported E-Shredding and Scanning licenses. To use the Scanning function, the optional Duplex Image Reader-L1 must be attached to the machine.

• Remote Manager to view and control multiple PRISMAsync-driven devices. • Forward jobs directly from one PRISMAsync engine to another PRISMAsync

engine • Support for Adobe APPE for Native PDF Printing6 • Connect to a shared printer without the need to install it.

6 Standard on the varioPRINT 140 and varioPRINT 130, and optional on the varioPRINT 115.



2.4.1 PRISMAsync Features The PRISMAsync controller has the following features: • Enhanced Job Management – Enhanced search allows listing queued jobs by

specific terms. Jobs can also be sorted by account ID, loaded media, label, and output location. Jobs can me moved from all queues to DocBox (requires printer software version 6.1 or higher).

• PRISMAlytics Dashboard Improvements – Total clicks can now be reduced

to Black-and-White and Color (requires printer software version 6.1 or higher). • JDF/JMF Enhancements – .XSLT support allows for better integration

between PRISMAsync and MIS/pre-press systems. All JDF/JMF communications can be logged to reference for future analysis (requires printer software version 6.1 or higher).

• Security improvements – The System Administrator can limit what a Service

Technician can see during system maintenance. User passwords rules are enhanced to require stronger passwords, without requiring users to change existing passwords until they expire (requires printer software version 6.1 or higher).

• Smart Card Login Support – Smart Card login requires use of a public key

certificate and a private key for enhanced security. Smart Card login also supports single sign on and multi-user (“group”) cards (requires printer software version 6.1 or higher).

• New IPP Commands – The “Release Job” and “Hold Job” commands have

been added to the IPP command set. Released and Held jobs are moved from the “Waiting” queue to the “Scheduled” queue (requires printer software version 6.1 or higher).



• uniFLOW – The uniFLOW applet for the PRISMAsync comes with the PRISMAsync V6.3 software. To use the uniFLOW features, the customer also needs a uniFLOW server that is upgraded to uniFLOW 2018 V6 or higher. The uniFLOW embedded applet for the varioPRINT is compatible with two standard modules: Secure Print Module: • Enables the customer to send documents to any device on the network, holds

the print job until a user logs on to the machine with ‘My Print Anywhere’. • Single Sign-On by PIN, user name and password, or card reader access. • Edit job settings directly from the Secure Print queue before sending a

print job. Statistics Module (Accounting): • Produce over 60 detailed accounting reports for better cost tracking, or

customize reports for specific tracking needs. • Multi-level cost center selection. • Retrieve accounting logs for uniFLOW secure print, as well as PRISMAsync

Copy and Scan.

IMPORTANT • When uniFLOW is enabled, smart cards can only be used for uniFLOW. The

Smart Card Reader feature on the PRISMAsync is disabled. • Jobs cannot be released from DocBox through uniFLOW. • It is highly recommended that customers only use the uniFLOW Universal

Driver to submit jobs to the printer. Jobs sent via the PRISMAsync Print Driver to uniFLOW cannot be edited in the Secure Print queue.



2.4.2 PRISMAsync Standard Licenses This section describes the standard licenses that come packaged with the PRISMAsync controller. • Scheduler • Remote Manager • Scan-to-File • PostScript and PDF • PCL 6 • Océ Remote Services • PRISMAlytics Dashboard

2.4.3 PRISMAsync Optional Licenses

This section describes optional licenses that can be used on the PRISMAsync controller. • E-Shredding • Integrity Checker • DPLink • DocBox • Streaming • Multiple Queue • Accounting • PPML7

IMPORTANT E-Shredding has an impact on product performance. Depending on the E-Shredding settings (number of overwrites) and the complexity of the processed job data, an impact of 10% to 40% can be expected on product performance.

7 Requires APPE. Standard on the varioPRINT 140 and varioPRINT 130. Optional on the varioPRINT 115.



2.4.4 PRISMAsync System Backup To backup the PRISMAsync system settings and licenses, a technician must use the USB key included in the PRISMAsync box. To backup the PRISMAsync’s firmware, a technician must use a specific type of USB stick (available for purchase), as described in “USB Stick,” on p. 35. The USB key and USB stick are the same types of physical hardware (flash drives); however, they are both used for different purposes. It is strongly recommended that technicians make a backup of the system after installation, major system changes, or upgrades on the provided USB key. The USB key must be left with the PRISMAsync controller.

2.4.5 PRISMAsync Firmware Updates It is recommended that a technician use a specific kind of USB stick to upgrade or restore the PRISMAsync controller firmware. The USB stick is NOT included in the PRISMAsync box. The USB stick used for upgrading the controller firmware must adhere to specific technical requirements. For the USB stick’s technical requirements, see “USB Stick,” on p. 35.

IMPORTANT • Before downloading new firmware on the USB stick, the USB stick must be

formatted (all contents on the stick erased). During the firmware update process, the current firmware on the PRISMAsync controller is erased and replaced by the newly installed firmware. Therefore, it is highly recommended that the technician backup the PRISMAsync system settings and licenses on the USB key first. Then, after the firmware is updated (using the USB stick), the installed licenses and settings can be restored using the USB key.

• Once the USB stick has been used to update firmware on the PRISMAsync controller, it cannot be used again until the format process is repeated.

• The USB key and USB stick should not be used interchangeably. • Using a USB stick that does not meet the specific technical requirements, may

result in an error when backing up the system settings or an error when installing firmware.



2.5 Professional Input/Output Accessories The Canon varioPRINT 140 Series features many input and output accessories that allow customers working in office environments to complete large jobs directly from the machine. For more information on the input and output accessories that can be attached to the machine, see “Specifications,” on p. 32. Input Accessories • Duplex Color Image Reader-L1 (standard) • ePIM-D1 (external Paper Input Module) (optional) • Bulk Tray Small Format (Installs in Engine Trays 1 and 2) • Document Insertion Unit-N1 Optional Finishing (Output) Accessories • Output Tray (for Basic Configuration) • Staple Finisher-W1 • Booklet Finisher-W1 • Puncher Unit-BS1 (Internal to the Staple Finisher-W1 or Booklet Finisher-W1) • High Capacity Stacker-H1 • DFD Adapter-A1 and Finisher Bridge-A1 • Paper Folding Unit-J1 • Multi Function Professional Puncher-B1 • Booklet Trimmer-F1 • Two-Knife Booklet Trimmer-A1 • SDD (Smart Dedicated Design) Square Fold Booklet-Maker with Two-Knife

Trimmer • SDD Square Fold Booklet-Maker • PowerLift • Decurler Unit-C1 • MAX Ring Binder (Requires the High Capacity Stacker-H1 or DFD Adapter and

Finishing Bridge-A1) • SDD BLM300C Professional Booklet Maker (Requires the High Capacity

Stacker-H1 or DFD Adapter and Finishing Bridge-A1) • Plockmatic BLM 50/35 Professional Booklet Maker (Requires the High Capacity

Stacker-H1 or DFD Adapter and Finishing Bridge-A1) • GBC eWire Pro Wire Binding System (Requires the Multi Function Professional

Puncher-B1 and Decurler Unit-C1)



IMPORTANT • Either the ePIM-D1 or the Cover must be selected. • Some type of finishing option (Staple Finisher-W1, Booklet Finisher-W1, or High

Capacity Stacker-H1) is required. • The Staple Finisher-W1 cannot be installed with the Booklet Finisher-W1. • The Duplex Color Image Reader-L1 and Color Image Reader-K1 cannot be

installed together. • The Two-Knife Booklet Trimmer-A1 and SDD Square Fold Booklet-Maker with

Two-Knife Trimmer cannot be installed together. • The Booklet Trimmer-F1 requires the Booklet Finisher-W1. • The Two-Knife Booklet Trimmer-A1 requires the Booklet Trimmer-F1 and Booklet

Finisher-W1. • The Multi Function Professional Puncher-B1 requires the High Capacity

Stacker-H1, Staple Finisher-W1, or Booklet Finisher-W1. • The SDD Square Fold Booklet-Maker with Two-Knife Trimmer requires the

Booklet Trimmer-F1. • The SDD Square Fold Booklet-Maker requires the Booklet Trimmer-F1. • The Paper Folding Unit-J1 requires the Staple Finisher-W1 or Booklet

Finisher-W1. • Two High Capacity Stacker-H1s can be attached to the machine at once. • The PowerLift is used only with the High Capacity Stacker-H1. • The SDD BLM300C Professional Booklet Maker requires the High Capacity

Stacker-H1 or DFD Adapter and Finishing Bridge-A1 and the DFD 1,002 mm Kit, has several options that enhance the booklet maker’s finishing system, and the BLM300C finishing system must be the final in-line accessory attached to the machine.

• The SDD BLM300C Professional Booklet Maker with the SDD Square Fold or the SDD Two-Knife Trimmer requires the SDD Front Trimmer.

• The SDD Long Belt Stacker and SDD Short Belt Stacker cannot be installed together.

• The only accessories that can be attached to the machine after the MAX Ring Binder are the Staple Finisher-W1 or Booklet Finisher-W1, Booklet Trimmer-F1, and Two-Knife Booklet Trimmer-A1. These options require pedestals and ramps to make the feeding slots of the finishing accessories even with the output slot of the MAX Ring Binder.

• The Decurler Unit-C1 must be attached immediately after the engine. • The HCS End Module Cover is required if there are no finishing accessories after

the High Capacity Stacker-H1. • The MAX Ring Binder requires the High Capacity Stacker-H1 or DFD Adapter

and Finishing Bridge-A1and the DFD 860 mm Kit. • The Plockmatic BLM 50/35 Professional Booklet Maker requires the High

Capacity Stacker-H1 or DFD Adapter and Finishing Bridge-A1. • The GBC eWire Pro Wire Binding System requires the Multi Function

Professional Puncher-B1 and Decurler Unit-C1. • The GBC eWire Pro does not support clear covers.



IMPORTANT • The Finisher Bridge-A1 requires the DFD Adapter-A1 and the Staple/Booklet

Finisher-W1 • The Finisher Bridge-A1 requires the upper tray from the Finisher-W1 be removed

and replaced by the Finisher Bridge-A1. • The Finisher Bridge-A1 can be ordered with the Finisher Bridge Height Kit 1002

to connect to a DFD finisher with a 1,002 mm height paper path. • The Staple/Booklet Finisher-W1 controller PCB may require replacement in order

to work with the DFD Adapter-A1 and Finisher Bridge-A1. Refer to Technical Publication TP18 245 on the e-Support Web site (support.cusa.canon.com) for details.

http://www.support.cusa.canon.com/



3. Machine Dimensions and Space Requirements 3.1 Dimensions

The following table includes the approximate width, height, and depth dimensions (in inches and millimeters) of the main unit and optional accessories.

Unit Width Depth Height Main Unit without Operator Panel 44.5” 1,130 mm 30.1” 765 mm 40.9” 1,040 mm

Main Unit with Operator Panel 44.5” 1,130 mm 30.1” 765 mm 56.3” 1,430 mm Duplex Color Image Reader-D1 24.9” 633 mm 23.1” 588 mm 7.0” 179 mm

ePIM-D1 38.9” 987 mm 29.2” 743 mm 41.6” 1,056 mm Output Tray 14.2” 360 mm 21.5” 547 mm 10” 256 mm Document Insertion Unit-N1 29.4” 746 mm 31.2” 793 mm 55.4” 1,407 mm High Capacity Stacker-H1 39.3” 997 mm 31.1” 792 mm 53.6” 1,362 mm Paper Folding Unit-J1 13.2” 336 mm 31.2” 793 mm 46.9” 1,190 mm Staple Finisher-W1 31.3”8 800 mm8 31.1” 792 mm 48.8” 1,239 mm Booklet Finisher-W1 31.3”9 800 mm9 31.1” 792 mm 48.8” 1,239 mm Puncher Unit-BS1 Internal Multi Function Professional Puncher-B1 17.5” 445 mm 31.5” 795 mm 40.9” 1,040 mm

Booklet Trimmer-F110 82.5” 2,095 mm 30.7” 779 mm 40.9” 1,040 mm Two-Knife Booklet Trimmer-A111 21.1” 536 mm 30.3” 770 mm 40.9” 1,040 mm

Square Fold Booklet-Maker & Two-Knife Trimmer12 62.7” 1,592 mm 27.6” 700 mm 51.2” 1,300 mm

Square Fold Booklet-Maker12 43.3” 1,100 mm 14.2” 360 mm 44.9” 1,140 mm PowerLift 21.0” 530 mm 33.0” 850 mm 60.0” 1,520 mm Decurler Unit-C1 9.8” 250 mm 31.2” 792 mm 40.9” 1,040 mm MAX Ring Binder 33.9” 260 mm 25.8” 655 mm 43.8” 1,113 mm

Pedestal-A1 26.75” 678 mm 31.5” 800 mm 5.0” 127 mm Extension for Pedestal-A1 8.0” 203 mm 30.5” 775 mm 4.0” 102 mm Ramp for Pedestal-A1 25.0” 635 mm 9.4” 238 mm 5.5” 140 mm

SDD BLM300C Professional Booklet Maker 35.8” 910 mm 27.6” 700 mm 45.3” 1,150 mm

SDD Front Trimmer BLT6989 14.2” 360 mm 23.6” 600 mm 43.3” 1,100 mm

SDD 2-Knife Trimmer STR6702 23.6” 600 mm 27.6” 700 mm 43.3” 1,100 mm

SDD Square Fold SFM6904 14.2” 360 mm 23.6” 600 mm 43.3” 1,100 mm SDD Rotator RTM6940 26.8” 680 mm 26.4” 670 mm 43.3” 1,100 mm SDD Long Belt Stacker BST6800 61.8” 1,570 mm 17.7” 450 mm 29.9” 760 mm

SDD Short Belt Stacker BST6900 32.3” 820 mm 17.7” 450 mm 29.9” 760 mm

8 When the extension tray is pulled out, the width is 41.7” (1,060 mm). 9 When the auxiliary booklet tray is pulled out, the width is 41.7” (1,060 mm). 10 With the conveyor section and delivery tray. 11 Without the conveyor section and delivery tray. 12 Square Fold Booklet-Maker Conveyor Tray is fully extended.



Dimensions (cont’d)

Unit Width Depth Height BLM 50/35 Professional Booklet Maker 57 7/8” 1,470 mm 28 3/4" 730 mm 41 3/8” 1,050 mm

Plockmatic BF50 Book Fold Module 14 1/4" 360 mm 28 3/4” 730 mm 41 3/8” 1,050 mm

Plockmatic CF50 Cover Feeder 12 1/4" 310 mm 7 1/2" 190 mm 20 7/8” 530 mm

Plockmatic FTR50 Trimmer Module 14” 360 mm 28 3/4" 730 mm 41 3/8" 1,050 mm

Plockmatic BST4000-1 Belt Stacker 20 1/2” 521 mm 70 1/2” 1,791 mm

25” to 41 3/4”

635 mm to

1,060 mm GBC eWire Pro Wire Binder 35 7/8” 911 mm 31 3/4” 805 mm 42 1/2” 1,079 mm DFD Adapter-A1 11 7/8” 300 mm 29 1/4" 745 mm 40 7/8” 1,040 mm Finisher Bridge-A1 23 1/2" 600 mm 29 1/4" 745 mm 5 7/8” 150 mm



3.2 Weight The approximate weights of the main unit, feeding and finishing options (in pounds and kilograms) are listed in the table below.

Unit Weight Main Unit 580 lb 263 kg Operator Panel 7.5 lb 3.4 kg Operator Attention Light-C1 3 lb 1.4 kg Duplex Color Image Reader-D1 59 lb 27 kg ePIM-D1 447.5 lb 203 kg Output Tray 9.2 lb 4.2 kg Document Insertion Unit-N1 122 lb 55 kg High Capacity Stacker-H1 264.6 lb 120 kg Paper Folding Unit-J1 156 lb 71 kg Staple Finisher-W1 287 lb 130 kg Booklet Finisher-W1 401 lb 182 kg Puncher Unit-BS1 6.7 lb 3 kg Multi Function Professional Puncher-B1 225 lb 102 kg Booklet Trimmer-F111 335 lb 152 kg Two-Knife Booklet Trimmer-A111 319 lb 145 kg Square Fold Booklet-Maker & Two-Knife Trimmer 573 lb 260 kg Square Fold Booklet-Maker 154 lb 70 kg PowerLift 127 lb 58 kg Decurler Unit-C1 105.8 lb 48 kg MAX Ring Binder 330 lb 150 kg

Pedestal-A1 49.5 lb 22.5 kg Extension for Pedestal-A1 6.5 lb 3 kg Ramp for Pedestal-A1 21 lb 9.5 kg

SDD BLM300C Professional Booklet Maker 363.8 lb 165 kg SDD Front Trimmer BLT6989 187.4 lb 85 kg SDD 2-Knife Trimmer STR6702 451.9 lb 205 kg SDD Square Fold SFM6904 143.3 lb 65 kg SDD Rotator RTM6940 286.6 lb 130 kg SDD Long Belt Stacker BST6800 55 lb 25 kg SDD Short Belt Stacker BST6900 44 lb 20 kg

BLM 50/35 Professional Booklet Maker 341 lb 155 kg Plockmatic BF50 Book Fold Module 116.7 lb 53 kg Plockmatic CF50 Cover Feeder 17.6 lb 8 kg Plockmatic FTR50 Trimmer Module 161 lb 73 kg Plockmatic BST4000-1 Belt Stacker 154 lb 70 kg

GBC eWire Pro Wire Binder 500 lb 226 kg DFD Adapter-A1 132 lb 60 kg Finisher Bridge-A1 66 lb 30 kg 11 Without the conveyor section and delivery tray.



3.3 Dimensions Diagrams The installation site must provide enough space for unrestricted operation, maintenance work, and proper ventilation. Every attempt should be made to install the equipment in a room that is large enough for the proper servicing and maintenance of the equipment, and ensure that issues, such as ventilation, odors, and dust accumulation are not a concern.

Two-Knife Booklet Trimmer-A1

Approximately 21.1” Booklet TrimmerF1 Approximately 82.5”

Staple or Booklet

Finisher-W1

Approx.

31.3”

Paper Folding Unit-J1

Approx.

13.2”

High Capacity Stacker-H1

Approximately 39.3”

High Capacity Stacker-H1


Doc. Insert. Unit-F1

Approx.

29.4”

Main Unit


ePIM-D1


Approximately 341.1” (8664 mm)

Approx. 31.2” Provide at least 31” behind, 39.4” around the left side, 23.6” around the right side, and 55” around the front of the machine (with all doors and access panels open).

Approx. 69.9”

Approx. 40.9”



MAX Ring Binder with Additional Finishing Accessories Downstream

MAX Ring Binder Configured Without Additional Accessories Downstream



Max Ring Binder Pedestal Setup

Four Pedestals (max) with Ramp to the Left Side

Four Pedestals (max) with Ramp to the Front

IMPORTANT • The Canon varioPRINT 140 was created to be modular in design. Floor space,

budget, monthly copy/print volume, and applications will determine which configuration works best.

• The large configuration includes the Main Unit, Duplex Color Image Reader-L1, ePIM-D1, Document Insertion Unit-N1, High Capacity Stacker-H1 (x 2), Paper Folding Unit-J1, Staple/Booklet Finisher-W1, Booklet Trimmer-F1, and Two-Knife Booklet Trimmer-A1.

• The optional SDD Square Fold Booklet-Maker with Two-Knife Trimmer is not shown in the configuration diagrams above. If the SDD Square Fold Booklet-Maker with Two-Knife Trimmer is attached to the machine, make sure that there is approximately 62.6” (1,592 mm) of space added to the installation space and floor design.

• The optional SDD Square Fold Booklet-Maker is not shown in the configuration diagrams above. If the SDD Square Fold Booklet-Maker is attached to the machine, make sure that there is approximately 43.3” (1,100 mm) of space added to the installation space and floor design.



IMPORTANT • There is approximately 1/5” (5 mm) of space between each accessory attached. • Keep the back of the machine at least 18” (457.2 mm) away from a wall (only if

the main engine, optional ePIM-D1, and either the Staple Finisher-W1 or Booklet Finisher-W1 are attached). For all other configurations, keep the back of the machine at least 31” (787.4 mm) away from a wall.

• Make sure that approximately 55” (1,397 mm) of space is provided around the front, approximately 39.4” (1,000 mm) of space is provided around the left side, and approximately 23.6” (600 mm) of space is provided around the right side of the machine for the proper servicing of the equipment.

• If the MAX Ring Binder is attached to the machine, and there is Canon Finishing equipment attached after the Ring Binder, make sure that there is approximately 131.8” (3,347 mm) of space added to the left side of the machine. This space can be reduced to 106.8” (2712 mm) if the pedestal ramps are placed in the front or back of the machine.

• If the MAX Ring Binder’s pedestal ramps are required, and are attached to the front or the back of the machine, make sure to add approximately 51” (1,295 mm) of space to the front or back of the machine.

• The SDD BLM300C Professional Booklet Maker requires the High Capacity Stacker-H1 or DFD Adapter and Finishing Bridge-A1 and the DFD 1,002 mm Kit, has several options that enhance the booklet maker’s finishing system, such as a 2-knife trimmer and square fold device, and the BLM300C finishing system must be the final in-line accessory attached to the machine.

• The GBC eWire Pro requires the Decurler Unit-C1. Be sure to include the dimensions and weight of the Decurler when installing the eWire.

• The MAX Ring Binder and SDD BLM300C cannot be installed together. • The MAX Ring Binder requires the DFD Output Height 860 mm Kit. • The floor must be level (with no bows) for the stabilization and support of the

machine. • The machine should not be moved once it is in place.



Plockmatic BLM 50/35 Professional Booklet Maker Setup (Stacker Installed Perpendicular)



Plockmatic BLM 50/35 Professional Booklet Maker Setup (Stacker Installed Inline)

3.4 Floor Structure Requirements The floor on which this machine is installed must have strength of at least 100 lb/ft2 (488 kg/m2). If the floor does not have this level of strength, consult a building contractor before installing the machine. The weight of the machine is distributed on the floor through the adjusters and wheels. Do not install the machine on an unstable floor or platform.



4. Power/Electrical Requirements The Canon varioPRINT 140 Series requires a NEMA 6-20R receptacle for the main unit and proper operation.

Most Canon varioPRINT accessories require a NEMA 5-15R receptacle.

NEMA 6-20R Receptacle

NEMA 5-15R Receptacle



4.1 Power Requirements for the Main Unit and Optional Accessories

Part or Accessory Power Supply Power Supply Cord/ Plug Specifications Main Unit 1-208-240 V/20 A outlet NEMA 6-20R e-PIM-D1 1-120 V/15 A outlet NEMA 5-15 Duplex Color Image Reader-L1 or –K113 From the main unit —

Document Insertion Unit-N1 1-120 V/15 A outlet NEMA 5-15

High Capacity Stacker-H1 14 1-120 V/10 A outlet (regardless of the number of stackers connected)

NEMA 5-15

Paper Folding Unit-J113 From the finisher —

Staple Finisher-W1 1-120 V/15 A outlet NEMA 5-15

Booklet Finisher-W1 1-120 V/15 A outlet NEMA 5-15 Multi Function Professional Puncher-B1 1-120 V/15 A outlet NEMA 5-15

Booklet Trimmer-F113 From the finisher — Two-Knife Booklet Trimmer-A1 1-120 V/15 A outlet NEMA 5-15

Square Fold Booklet-Maker & Two-Knife Trimmer15 1-120 V/15 A outlet NEMA 5-15

Square Fold Booklet-Maker 1-120 V/15 A outlet NEMA 5-15

PowerLift 1-120 V/2 A outlet NEMA 5-15

Decurler Unit-C113 From the main unit —

MAX Ring Binder 1-120 V/15 A outlet NEMA 5-15 SDD BLM300C Professional Booklet Maker 1-120 V/15 A outlet NEMA 5-15

SDD Rotator RTM6940 1-120 V/15 A outlet NEMA 5-15 SDD Front Trimmer BLT698913

From the SDD BLM300C Professional Booklet Maker —

SDD 2-Knife Trimmer STR670213 SDD Square Fold SFM690413 SDD Long Belt Stacker BST680013 SDD Short Belt Stacker BST690013

13 Does not require any additional outlets. 14 If a second High Capacity Stacker-H1 is connected, the second stacker requires an additional 120 V/10 A outlet. 15 The SDD Two-Knife Trimmer provides the SDD Square Fold Booklet-Maker with power.



Power Requirements (Continued)

Part or Accessory Power Supply Power Supply Cord/ Plug Specifications BLM 50/35 Professional Booklet Maker 16 1-120V/15 A outlet NEMA 5-15

Plockmatic BST4000-1 Belt Stacker

From the Plockmatic BLM 50/35 Professional Booklet Maker

—

Plockmatic CF50 Cover Feeder Plockmatic BF50 Book Fold Module Plockmatic FTR50 Trimmer Module

GBC eWire Pro Wire Binder 1-120V/15 A outlet NEMA 5-15

DFD Adapter-A1 1-120V/15 A outlet NEMA 5-15

Finisher Bridge-A1 N/A —

IMPORTANT • Use only dedicated outlets for the main unit and each optional accessory. Do not

use extension cords. • Before installation, confirm that all necessary receptacles are available.

16 Canon USA strongly suggests that the power receptacle for the BLM 50/35 Professional Booklet-Maker is

connected to a separate breaker from the power receptacle for the Rotator Module. This is necessary to maintain adequate current for the Professional Booklet Maker and each of the modules.



5. Environmental Factors and Requirements This section describes the necessary environmental factors and requirements in which the machine should be operated to achieve the best image quality and print results.

5.1 Temperature and Humidity Conditions The optimal humidity range is 20% to 80% RH (Relative Humidity) with a room temperature of 62.6°F to 86°F (17°C to 30°C) for printing and scanning, 62.6°F to 93.2°F (17°C to 34°C) for printing only, and 59°F to 86°F (15°C to 30°C) when using the GBC eWire Pro Wire Binder. Make sure to maintain a constant temperature and humidity within this range. Otherwise, there is a risk that productivity, paper feeding, image quality, and reliability may be affected if the machine is operated outside of these guidelines. The machine should not be installed in locations with significant shifts in temperature or humidity. Areas containing water, or equipment that can significantly alter room temperature or humidity, such as a space heater, stove, or portable air conditioner, should be avoided. The optimal humidity range for storing paper is 20% to 80% RH with a room temperature of 62.6°F to 86°F (17°C to 30°C) for printing and scanning, or 62.6°F to 93.2°F (17°C to 34°C) for printing only. Storing paper in a location that does not meet these specifications may affect paper feeding and image quality. For example, if the humidity is too high, paper curling and paper jams will increase. If the humidity is too low, paper may shrink or lose resistance, and toner will not adhere to the paper as well. Only use paper that has fully acclimatized to the environment in which the machine is installed. Using paper that has been stored in a different environment (with a different temperature and humidity), may cause paper jams or result in poor print quality.

5.2 Temperature Gradient If a sudden temperature change occurs, it may have an adverse effect on image positioning. Sudden temperature changes may cause the paper to bend or contract, cause the machine to malfunction, and form condensation. Every effort should be made to maintain consistent temperature and humidity levels in the operating environment at all times for the Canon varioPRINT 140 Series.

5.3 Ventilation Ensure that there is at least 1,236 ft3 (35 m3) of space in the location where the machine will be installed. The machine does not emit any ozone.



5.4 Lighting We recommend installing the machine in a location with at least 500 lux (29 1/2” (75 cm) above the floor) for normal operation and maintenance.

5.5 Sunlight Avoid installing the machine in direct sunlight. Direct sunlight has adverse effects on toner consistency and image quality. If direct sunlight is unavoidable, use curtains to shade the machine. Make sure that the curtains do not block the machine’s ventilation slots or louvers, or interfere with the electrical cord or power supply.

5.6 Ammonia Avoid installing the machine where ammonia is emitted. In a sufficient amount, ammonia will attack the surfaces of the machine’s paper feed and image quality components, thereby shortening their useful life and increasing the need for periodic and remedial maintenance. A professional assessment of the air quality in the room in which the machine is to be installed is recommended prior to its installation.



6. Specifications This chapter explains the specifications of the main unit and optional accessories. The specifications provided are approximate values for the user’s reference only, and are subject to change without notice for product improvement or future release.

6.1 Main Unit

Item Specifications

varioPRINT 140 varioPRINT 130 varioPRINT 115

Name Canon varioPRINT 140 Series

Type Console

Imaging Technology DirectPress

Color Supported Black-and-White

Print Resolution Up to 600 x 2,400 dpi (using PostScript)

Copy Resolution Up to 600 x 1,200 dpi

Scan Resolution Up to 600 dpi17

Number of Gradations 200

Paper Capacity

Drawer 1: Up to 1,500 sheets (LTR) (20 lb bond (80 g/m2)) Drawer 2: Up to 1,500 sheets (LTR) (20 lb bond (80 g/m2)) Drawer 3: Up to 500 sheets 5.5” x 7.2” to 12.6” x 17” (140 mm x 182 mm to 320 mm x 432 mm) Drawer 4: Up to 500 sheets 5.5” x 7.2” to 12.6” x 19.2” (140 mm x 182 mm to 320 mm x 488 mm)

Paper Size/Weight/Type

Size: 12” x 19.2”, 12” x 18”, 11” x 17”, LGL, LTRR, EXECR, EXEC LTR-Tab, LTR, and Irregular Size (5.5” x 7.2” to 12.6” x 19.2” (140 mm x 182 mm to 320 mm x 488 mm))

Weight: 13 lb bond to 110 lb cover (50 to 300 g/m2) Type: Plain, Offset, Coated, Transparency18, Recycled19, Preprinted20,

Tab, Labels, Texture, Die cuts, Carbonless (NCR)19, 21

Warm-Up Time Approximately 2.5 minutes to 4.5 minutes, depending on the amount of toner in the cleaner. First Copy Time Approximately 3.9 seconds (simplex) First Print Time Approximately 5.1 seconds (simplex) Maximum Printable Area

Adobe PostScript: 3mm from side, up to 12.1” x 19.1” (308 mm x 484 mm) PCL: Adjustable

Registration Tolerance Up to ±0.5 mm in feed direction and cross-feed direction22

17 Color scanning requires an optional license. 18 Must be paper-backed. 19 Use Canon recommended paper. (See “Selecting the Correct Media,” on p. 66.) 20 Use Canon’s recommended guidelines for preprinted media. (See “Selecting the Correct Media,” on p. 66.) 21 Carbonless (NCR) paper can only be fed from the ePIM. 22 Based on LTR-size paper and the image shift is on one side.



Main Unit Table Continued

Item Specifications

varioPRINT 140 varioPRINT 130 varioPRINT 115

Multiple Prints 1 to 65,000 sheets

Operating Noise Printing: Approximately 64 dB Standby: Approximately 33 dB Power Source 1-phase, 208-240V AC, 50/60 Hz, 20A (one power cord)

Maximum Power Consumption

Main Unit: Ready Mode Approximately 270 W Low Power Mode: Approximately 150 W Sleep Mode: Approximately 4.3 W Off Mode: Approximately 0.2 W

TEC (Typical Electricity Consumption)

Approximately 22.8 kWh Approximately 21.2 kWh Approximately 20.3 kWh

Dimensions (H x W x D)

Without Operator Panel: Approximately 40.9” x 44.5” x 30.1” (1,040 mm x 1,130 mm x 765 mm) With Operator Panel: Approximately 56.3” x 44.5” x 30.1” (1,430 mm x 1,130 mm x 765 mm)

Weight Approximately 579.8 lb (263 kg)

Ozone Emissions None

Altitude The varioPRINT 140 Series has not been tested at high altitude and any effects to performance are unknown. The performance of the varioPRINT 140 Series and DirectPress Technology should be minimally impacted by high altitude.

Temperature while in Use

62.6°F to 86°F (17°C to 30°C) for printing and scanning or 62.6°F to 93.2°F (17°C to 34°C) for printing only

Humidity 20 to 80% RH



6.2 PRISMAsync Controller

Item Specifications

Server Type • T30 Embedded controller with optional removable hard disk • Web-based configuration with Settings Editor

Processor Celeron G1620 at 2.7 GHz, 2 Cores Memory 4 GB Hard Disk 500 GB

Network Connectivity 10Base-T/100Base-TX/1000 Base-T

Network Protocols TCP/IP (LPR/LPD, Socket), SMB Static IP/Auto IP (via DHCP) SNMP v1-v3 (Printer MIB, Private MIB, Job Monitor MIB), IPP Operating System Windows 10 Page Description Languages

Adobe PostScript 3, PPML/GA, Level 1 (optional), PPML, V1.5/2.1/2.2 (optional), PDF 1.7, PDF/VT, PCL 6, XPS, IPDS (optional)

Print from USB PDF, PS, PCL, XPS via USB connection on the operator panel

Security CC EAL 2+, E-Shredding, HTTPS, Firewall, PIN for Doc Box, User authentication to SDS, optional removable hard disk, IPv6, software protection license (integrity checker), user authentication per user role (key operator, system administrator, and service representative)

Features

• Print-while-RIP • RIP-then-Print • Streaming • Web-based configuration • Remote diagnostics • Remote monitor

• Process multiple jobs • No cycle-down between jobs • Multi-tasking (scan, copy, print) • Remote meter reading • Remote software upgrade • uniFLOW support with the latest

release of PRISMAsync V6.3

Options

• Generic USB mouse support • Section 508 kit (Mouse-C1) • CCD (Charge-Coupled Device) interface for accounting • Operator attention light • Removable hard disk



6.2.1 USB Stick

Item Specifications

USB Connection Speed USB 2.0 High-Speed certified, USB 1.1 backward compatible

USB Stick Size ≥ 2 GB, 16 GB is recommended

Bootable Media Support Yes (Mandatory)

File System Support Bootable NTFS and FAT32 (Intel)

Drivers Windows generic drivers for USB mass storage. No specific drivers or specific setup. Bios Recognition USB HDD device

USB Stick Technology SLC (Single Level Cell) (Mandatory)

Encryption No hardware data encryption. Software on the USB stick is allowed.23 U3 Support Not allowed.

Biometric Support Not allowed.

Micro-Drive Not allowed.

Ready Boost Certified Yes (Mandatory)

Minimal Throughputs

File Size 512 B 32 KB 256 KB 2 MB 64 MB Read 1.5 MB 8 MB 20 MB 23 MB 24 MB Write 0.1 MB 0.8 MB 4 MB 4 MB 8 MB

Housing Rubber housing (shock resistant) is preferred.

LCD Screen Not allowed.

Activity Indication LED Yes

Tested & Supported USB Sticks24

• OCZ ATV – Supplier Ref#: OCZUSBATVxG25 • Corsair Flash Voyager GT – Supplier Ref#: CMFUSB2.0-16GBGT • Corsair Flash Voyager – Supplier Ref #: CMFUSB2.0-16GB • Patriot Xporter XT Boost – Supplier Ref#: PEFxGUSB25 • Kingston Data Traveler 160 – Supplier Ref #: DT160/xGB25 • Kingston Data Traveler R500 – Supplier Ref #: DTR500/xGB25 • Kingston Data Traveler Ultimate 3.0 G2 – Supplier Ref #:

DTU30G2/XGB25 • Sony Micro Vault Click Excellence – Supplier Ref #: USxGLX25 • Silicon-Power Luxmini 910 – Supplier Ref #: SP0xGBUF2910V1S25

Minimum Manufacturer Warranty 5 years

23 Encryption software on the USB stick is allowed only if it is possible to automatically format the stick (e.g., with

the Format command), and does not involve any additional human action. 24 USB sticks that have not been tested cannot be used. 25 “x” is the size of the USB stick (e.g., OCZUSBATV16G = 16 GB USB stick).



6.3 Duplex Color Image Reader-L1 with Feeder

Item Specifications

Feeder Original Feeding Mechanism Single Pass Duplex Automatic Document Feeder

Size and Weight of Originals

11” x 17”, LGL, LTR, LTRR, STMT, or STMTR 1-Sided Original: 10 lb bond to 80 lb cover (38 to 220 g/m2) 2-Sided Original: 13 lb bond to 80 lb cover (50 to 220 g/m2)

Original Tray Capacity 300 sheets (20 lb bond (80 g/m2))

Original Replacement Speed

Copying: 1-sided scanning and 2-sided scanning:

B&W originals (300 x 300 dpi) : Up to 120 ipm Color originals (300 x 300 dpi)17: Up to 120 ipm

1-sided scanning and 2-sided scanning:

B&W originals (600 x 600 dpi): Up to 108 ipm Color originals (600 x 600 dpi)17: Up to 25 ipm

1-sided scanning and 2-sided scanning:

Color originals (600 x 300 dpi)17: Up to 120 ipm Power Source From the main unit. Dimensions (H x W x D) Approximately 7 1/8” x 25” x 23 1/8” (179 mm x 633 mm x 588 mm)

Weight Approximately 59 lb (27 kg) Reader

Type Flat Bed

Platen Fixed

Resolution for Reading Up to 600 x 600 dpi

Acceptable Originals Sheet, book, three dimensional objects (up to 4.4 lb (2 kg))

Paper Sizes 11” x 17”, LGL, LTR, LTRR, STMT, STMTR, or EXEC 17 Color scanning requires an optional license.

6.4 Color Image Reader-K1 (For Print Only)

Item Specifications

Type Flat Bed

Platen26 Fixed

Resolution for Reading Up to 600 x 600 dpi

Acceptable Originals Sheet

Paper Sizes 11” x 17”, LGL, LTR, LTRR, STMT, STMTR, or EXEC

26 The platen glass scanner can only be used for printer adjustments in POC and SDS. The Copy and Scan

functions are not supported.



6.5 ePIM-D1

Item Specifications


Size: 12” x 19.2”, 12” x 18”, 11” x 17”, LGL, LTRR, LTR-Tab, LTR, and Irregular Size (8.0” x 8.0” to 12.6” x 19.2”

(203 mm x 203 mm to 320 mm x 488 mm)) Weight: 13 lb bond to 110 lb cover (50 to 300 g/m2) Type: Plain, Offset, Coated, Transparency, Recycled19, Preprinted20, Tab,

Labels, Texture, Die cuts, Carbonless (NCR)19, 21

Paper Deck Capacity (LTR paper (20 lb bond (80 g/m2))

Drawer 1: Up to 600 sheets Drawer 2: Up to 600 sheets Drawer 3: Up to 1,700 sheets for single tray Up to 3,400 sheets for optional Duo Paper Tray-C1 27 Drawer 4: Up to 1,700 sheets for single tray Up to 3,400 sheets for optional Duo Paper Tray-C127

Paper Feed Technology Vacuum feed, air separation

Power Source/Maximum Power Consumption

120V AC, 60 Hz, 1.0A Approximately 200 W

Dimensions (H x W x D) Approximately 41.6” x 38.9” x 29.3” (1,056 mm x 987 mm x 743 mm)

Weight Approximately 447.5 lb (203 kg) 19 Use Canon recommended paper. (See “Selecting the Correct Media,” on p. 81.) 20 Use Canon’s recommended guidelines for preprinted media. (See “Selecting the Correct Media,”

on p. 81.) 21 Carbonless (NCR) paper can only be fed from the ePIM.

6.6 Bulk Tray Small Format

Item Specifications

Distance: Table – “Max” – Line Minimum: Approximately 6.5” (165 mm)

Maximum Paper Weight Approximately 33 lb (15 kg)

Space between Paper Guides (Fixed On)

A5 (5.8”) Approximately 5.9” (149.8 mm) ±0.020” (0.5 mm)

STMT (5.5”) Approximately 5.6” (141.5 mm) ±0.020” (0.5 mm)

Adjustable Paper Guides Yes – By Service Technician Only

Marks for Standard Paper Sizes Yes

Maximum Paper Fill Mark Yes

X-Position Sheets in Tray Approximately 0.20” (5 mm)

Maximum Skew Sheets in Tray Approximately 0.079” (2 mm)

27 The optional Duo Paper Tray-C1 is available only for Drawers 3 and 4, supports only LTR-size paper. If the

single tray for Drawer 3 or 4 is converted to the optional Duo Paper Tray-C1, the paper tray cannot be converted back to use different-size paper again.



6.7 Output Tray

Item Specifications

Stacking Method Tray face-up/face-down stacking

Stack Mode Non-collate (no stack shift)

Paper Size All sizes available for main engine

Paper Weight 13 lb bond to 110 lb cover (50 to 300 g/m2)

Output Capacity 250 sheets simplex, long edge first (Red Label A4 80 g/m2)

Dimensions (H x W x D) Approximately 10” x 14 1/8” x 12 1/2" (256 mm x 360 mm x 547 mm)

Weight Approximately 9.2 lb (4.2 kg)

6.8 Document Insertion Unit-N1

Item Specifications4


Size: 13” x 19”, 12” x 18”, 12 5/8” x 17 3/4”, 11”x 17”, LGL, LTR, LTRR, EXEC, EXECR, and Irregular Size (7 1/8” x 7 1/8” to 13” x 19 13/64” (182 mm x 182 mm to 330.2 mm x 487.7 mm)) Weight: Plain: 13 lb bond to 110 lb cover (50 to 300 g/m2) Coated: 24 lb bond to 90 lb cover (80 to 240 g/m2) Type: Thin, Plain, Heavy, Recycled, Color, Pre-punched, Bond, Labels, Transparency, Tab28, Coated, Texture, Vellum

Paper Capacity Upper & Lower Trays: 200 sheets (20 lb bond (80 g/m2))

Power Source 120V AC, 60 Hz, 1.0A

Dimensions (H x W x D) Approximately 55 3/8” x 29 3/8” x 31 1/4” (1,407 mm x 746 mm x 793 mm)

Weight Approximately 122 lb (55 kg) 4 When equipped with the Document Insertion Unit-N1 or the Paper Folding Unit-J1, maximum speed in

simplex is limited to 110 images per minute.

28 To neatly square off tab paper, only output tab paper to the High Capacity Stacker’s Output Tray.



6.9 High Capacity Stacker-H1

Item Specifications

Paper Size 13” x 19”, 12” x 18”, 11” x 17”, LGL, LTR, LTRR, STMTR, EXEC, EXECR, and Irregular Size (5.5” x 7.2” to 13” x 19.2” (140 mm x 182 mm to 330.2 mm x 487.7 mm))

Paper Weight 13 lb bond to 110 lb cover (50 to 300 g/m2)

Paper Type Plain, Offset, Coated, Transparency, Recycled, Preprinted, Tab, Labels, Texture, Die cuts, Carbonless21

Paper Capacity Approximately 6,200 sheets maximum (Including the top tray)

Number of Trays 3 trays

Tray Capacity (LTR paper (20 lb bond (80 g/m2))

Top Tray: Up to 200 sheets (or 0.8” (20 mm) in height) Stack Tray (Internal): Up to 3,000 sheets (or 14” (355 mm) in height) Eject Tray (External): Up to 3,000 sheets (or 14” (355 mm) in height)

Stacking Modes Straight, Offset

Interface The optional DFD (Document Finishing Device) connects the High Capacity Stacker-H1 with various third party finishers. Power Source 120V AC, 60 Hz, 10A

Maximum Power Consumption

Off: Less than 0.5 W Low Power: Less than 2 W Ready: Less than 20 W In Use: Less than 200 W

Dimensions (H x W x D) Approximately 40.9” x 35.4” x 29.3”) (1,040 mm x 899 mm x 745 mm)

Weight Approximately 264.6 lb (120 kg) 21 Carbonless (NCR) paper can only be fed from the ePIM.

6.10 Paper Folding Unit-J1

Item Specifications4


Size: Z-Fold: 11” x 17” C-Fold: LTRR Outer Three-Fold: LTRR Four Fold: LGL and LTRR Half Fold LTRR Weight: Z-Fold, C-Fold, Outer Threw-Fold, Half Fold: 14 to 28 lb bond

(52 to 105 g/m2) Four Fold: 14 to 24 lb bond (52 to 90 g/m2) Type: Thin, Plain, Coated

Power Source From the finisher.

Dimensions (H x W x D) Approximately 46 7/8” x 13 1/4” x 31 1/4” (1,190 mm x 336 mm x 793 mm)

Weight Approximately 156 lb (71 kg)

4 When equipped with the Document Insertion Unit-N1 or the Paper Folding Unit-J1, maximum speed in simplex is limited to 110 images per minute.



6.11 Staple Finisher-W1 NOTE

To stack 2,000 sheets or more of LTR or EXEC paper, use Tray B first, and then Tray A.

Item Specifications


Size: 13” x 19”, 12” x 18”, 12 5/8” x 17 3/4”, 11” x 17”, LGL, LTR, LTRR, EXEC, STMTR, EXECR, and Irregular Size (4” x 7 1/8” to 13” x 19 1/4” (100 mm x 182 mm to 330.2 mm x 487.7 mm)) Weight: Plain: 14 lb bond to 110 lb cover (52 to 300 g/m2) Coated29: 20 lb bond to 110 lb cover (80 to 300 g/m2) Type: Thin, Plain, Heavy, Recycled, Color, Pre-punched, Bond, Transparency, Labels, Tab, Coated, Texture, Vellum, Carbonless21

21 Carbonless (NCR) paper can only be fed from the ePIM.

29 Coated paper can only be loaded from the Document Insertion Unit.



Staple Finisher-W1 Table Continued

Item Specifications

Capacity Per Tray30

No Collating, Collate, or Group Mode Tray A:

13” x 19”, 12 5/8” x 17 3/4”, 12” x 18”, 11” x 17”, LGL, LTR, LTRR, EXEC, and Irregular Size (4” x 7 1/8” to 13” x 19 1/4” (100 mm x 182 mm to 330.2 mm x 487.7 mm)):

Up to 1,000 sheets (or 5 3/4” (147 mm) in height) Tray B: If the High Volume Stack Mode is set to ‘Off’:

LTR, EXEC, and Irregular Size (4” x 7 1/8” to 11 3/4” x 8 1/2” (100 mm x 182 mm to 297 mm x 216 mm)):

Up to 2,000 sheets (or 11 1/4” (285 mm) in height)

13” x 19”, 12 5/8” x 17 3/4”, 12” x 18”, 11” x 17”, LGL, LTRR, and Irregular Size (7 1/8” x 8 1/2” to 13” x 19 1/4” (182 mm x 216 mm to 330.2 mm x 487.7 mm)):

Up to 1,000 sheets (or 5 3/4” (147 mm) in height) If the High Volume Stack Mode is set to ‘On’:

(The maximum stack volume may vary, depending on the paper type.) LTR, EXEC, and Irregular Size (4” x 7 1/8” to 11 3/4” x 8 1/2” (100 mm x 182 mm to 297 mm x 216 mm)):

Up to 4,000 sheets (or 19 1/4” (490 mm) in height)31

LTRR, and Irregular Size (7 1/8” x 8 1/2” to 11 3/4” x 11 3/4” (182 mm x 216 mm to 297 mm x 297 mm)):

Up to 2,000 sheets (or 11 1/4” (285 mm) in height

LGL and Irregular Size (7 1/8” x 11 3/4” to 12” x 17” (182 mm x 297 mm to 305 mm x 431.8 mm)):

Up to 1,500 sheets32 (or 8 1/2” (216 mm) in height

13” x 19”, 12 5/8” x 17 3/4”, 12” x 18”, 11” x 17”, and Irregular Size (7 1/8” x 17” or 12” x 7 1/8” to 13” x 19 1/4” (182 mm x 432 mm or 305 mm x 182 mm to 330.2 mm x 487.7 mm)):

Up to 1,000 sheets (or 5 3/4” (147 mm) in height) Collate and Shift/Group and Shift Modes Set Tray A:

12” x 18”, 11” x 17”, LGL, LTR, LTRR, EXEC, EXECR, and Irregular Size (4” x 7 1/8” to 12” x 18” (100 mm x 182 mm to 305 mm x 457.2 mm)):

Up to 1,000 sheets (or 5 3/4” (147 mm) in height) Tray B: If the High Volume Stack Mode is set to ‘Off’:



12” x 18”, 11” x 17”, LGL, LTRR, and Irregular Size (7 1/8” x 8 1/2” to 12” x 18” (182 mm x 216 mm to 305 mm x 457.2 mm)):


30 Apply the smallest capacity value of Tray B when differently-sized paper is output. 31 Up to 16 5/8” (423 mm) in height when coated paper is used. 32 Approximately 1,000 sheets when coated paper is used.




Item Specifications

Capacity Per Tray30

If the High Volume Stack Mode is set to ‘On’: (The maximum stack volume may vary, depending on the paper type.) LTR, EXEC, and Irregular Size (4” x 7 1/8” to 11 3/4” x 8 1/2” (100 mm x 182 mm to 297 mm x 216 mm)):

Up to 4,000 sheets (or 19 1/4” (490 mm) in height)31 LTRR and Irregular Size (7 1/8” x 8 1/2” to 11 3/4” x 11 3/4” (182 mm x 216 mm to 297 mm x 297 mm)):


11” x 17”, LGL, and Irregular Size (7 1/8” x 11 3/4” to 12” x 17” (182 mm x 297 mm to 305 mm x 431.8 mm)):

Up to 1,500 sheets32 (or 8 1/2” (216 mm) in height

12” x 18”, 11” x 17”, and Irregular Size (7 1/8” x 17” or 12” x 7 1/8” to 12” x 18” (182 mm x 432 mm or 305 mm x 182 mm to 305 mm x 457.2 mm)):

Up to 1,000 sheets (or 5 3/4” (147 mm) in height) Staple (Corner) Mode Set33 Tray B:

LTR, EXEC, and Irregular Size (8 1/4” x 7 1/8” to 11 3/4” x 8 1/2” (210 mm x 182 mm to 297 mm x 216 mm)):

Up to 3,000 sheets/200 sets (or 16 5/8” (423 mm) in height)

LTRR and Irregular Size (8 1/4” x 8 1/2” to 11 3/4” x 11 3/4” (210 mm x 216 mm to 297 mm x 297 mm)):

Up to 2,000 sheets/200 sets (or 11 1/4” (285 mm) in height

11” x 17”, LGL, and Irregular Size (8 1/4” x 11 3/4” or 11 3/4” x 7 1/8” to 11 3/4” x 17” (210 mm x 297 mm or 297 mm x 182 mm to 297 mm x 432 mm)):

Up to 1,500 sheets32/200 sets (or 8 1/2” (216 mm) in height Staple (Double) Mode Set33 Tray B:


Up to 3,000 sheets/200 sets (or 16 5/8” (423 mm) in height)

LTRR and Irregular Size (7 1/8” x 8 1/2” to 11 3/4” x 11 3/4” (182 mm x 216 mm to 297 mm x 297 mm)):

Up to 2,000 sheets/200 sets (or 11 1/4” (285 mm) in height

11” x 17”, LGL, and Irregular Size (7 1/8” x 11 3/4” or 11 3/4” x 7 1/8” to 11 3/4” x 17” (182 mm x 297 mm or 297 mm x 182 mm to 297 mm x 432 mm)):

Up to 1,500 sheets32/200 sets (or 8 1/2” (216 mm) in height 30 Apply the smallest capacity value of Tray B when differently-sized paper is output. 31 Up to 16 5/8” (423 mm) in height when coated paper is used. 32 Approximately 1,000 sheets when coated paper is used.

33 The Staple mode cannot be used with 13” x 19”, 12 5/8” x 17 3/4”, or 12" x 18" paper sizes.




Item Specifications

Capacity Per Tray30

Z-Fold Mode34 (When the Optional Paper Folding Unit-F1 Is Attached) Tray A: 30 sheets of Z-Fold paper per job Tray B: 10 sheets of Z-Fold paper per copy; 30 sheets of Z-Fold paper per job Half-Fold Mode (When the Optional Paper Folding Unit-F1 Is Attached) Tray A: Up to 50 sheets/5 sets (each contains 10 sheets)

Maximum Stapling Capacity/Available Staple Size

When the Standard Staple Cartridge Is Attached: (The maximum stapling capacity may vary, depending on the paper type and weight.)

LTR, EXEC, and Irregular Size (7 1/8”35 x 7 1/8” to 11 3/4” x 8 1/2” (182 mm35 x 182 mm to 297 mm x 216 mm)):

Up to 100 sheets (20 lb bond (80 g/m2)) or 98 sheets (20 lb bond (80 g/m2)) + 2 sheets (140 lb index (256 g/m2)) (or stacked up to 1/2” (11 mm) in height)

11” x 17”, LGL, LTRR, and Irregular Size (7 1/8”35 x 8 1/2” to 12” x 17” (182 mm35 x 216 mm to 305 mm x 432 mm)):

Up to 50 sheets (20 lb bond (80 g/m2)) or 48 sheets (20 lb bond (80 g/m2)) + 2 sheets (140 lb index (256 g/m2)) (or stacked up to 1/4” (5.5 mm) in height)

Corner Staple:

11” x 17”, LGL, LTR, LTRR, EXEC, and Irregular Size (8 1/4” x 7 1/8” to 11 3/4” x 17” (210 mm x 182 mm to 297 mm x 432 mm))

Double Staple:


Power Source 120 – 127 V AC, 50/60 Hz, 8A

Dimensions (H x W x D)

Approximately 48 3/4” x 31 1/2” (41 3/4”36) x 31 1/4” (1,239 mm x 800 mm (1,060 mm36) x 792 mm)

Weight Approximately 287 lb (130 kg) 30 Apply the smallest capacity value of Tray B when differently-sized paper is output.

34 The tray to which LGL and LTR Z fold can be output is limited. A job which includes Z folding may be routed to

the Z fold-appropriate tray, regardless of the delivery tray setting. 35 Approximately 8 1/4” (210 mm) when the Corner Staple Mode is used. 36 When the extension tray is pulled out.



6.12 Booklet Finisher-W1 NOTE

To stack 2,000 sheets or more of LTR or EXEC paper, use Tray B first, and then Tray A.

Item Specifications


Size: 13” x 19”, 12” x 18”, 12 5/8” x 17 3/4”, 11” x 17”, LGL, LTR, LTRR, EXEC, STMTR, EXECR, and Irregular Size (4” x 7 1/8” to 13” x 19 1/4” (100 mm x 182 mm to 330.2 mm x 487.7 mm)) Weight: Plain: 14 lb bond to 110 lb cover (52 to 300 g/m2) Coated29: 20 lb bond to 110 lb cover (80 to 300 g/m2) Type: Thin, Plain, Heavy, Recycled, Color, Pre-punched, Bond, Transparency, Labels, Tab, Coated, Texture, Vellum, Carbonless21

21 Carbonless (NCR) paper can only be fed from the ePIM. 29 Coated paper can only be loaded from the Document Insertion Unit.



Booklet Finisher-W1 Table Continued

Item Specifications

Capacity Per Tray30

No Collating, Collate, or Group Mode Tray A:

13” x 19”, 12 5/8” x 17 3/4, 12” x 18”,”, 11” x 17”, LGL, LTR, LTRR, EXEC, and Irregular Size (4” x 7 1/8” to 13” x 19 1/4” (100 mm x 182 mm to 330.2 mm x 487.7 mm)):

Up to 1,000 sheets (or 5 3/4” (147 mm) in height) Tray B: If the High Volume Stack Mode is set to 'Off':



13” x 19”, 12 5/8” x 17 3/4”, 12” x 18”, 11” x 17”, LGL, LTRR, and Irregular Size (7 1/8” x 8 1/2” to 13” x 19 1/4” (182 mm x 216 mm to 330.2 mm x 487.7 mm)):

Up to 1,000 sheets (or 5 3/4” (147 mm) in height) If the High Volume Stack Mode is set to 'On':


Up to 4,000 sheets (or 19 1/4” (490 mm) in height)31

LTRR, and Irregular Size (7 1/8” x 8 1/2” to 11 3/4” x 11 3/4” (182 mm x 216 mm to 297 mm x 297 mm)):


LGL, and Irregular Size (7 1/8” x 11 3/4” to 12” x 17” (182 mm x 297 mm to 305 mm x 432 mm)):

Up to 1,500 sheets32 (or 8 1/2” (216 mm) in height)

13” x 19”, 12 5/8” x 17 3/4”, 12” x 18”, 11” x 17”, and Irregular Size (7 1/8” x 17” or 12” x 7 1/8” to 13” x 19 1/4” (182 mm x 432 mm or 305 mm x 182 mm to 330.2 mm x 487.7 mm)):

Up to 1,000 sheets (or 5 3/4” (147 mm) in height) Collate and Shift/Group and Shift Modes Set Tray A:

12” x 18”, 11” x 17”, LGL, LTR, LTRR, EXEC, and Irregular Size (4” x 7 1/8” to 12” x 18” (100 mm x 182 mm to 305 mm x 457.2 mm)):

Up to 1,000 sheets (or 5 3/4” (147 mm) in height) 30 Apply the smallest capacity value of Tray B when differently-sized paper is output. 31 Up to 16 5/8” (423 mm) in height when coated paper is used. 32 Approximately 1,000 sheets when coated paper is used.




Item Specifications

Capacity Per Tray30

Tray B: If the High Volume Stack Mode is set to 'Off':



12” x 18”, 11” x 17”, LGL, LTRR, and Irregular Size (7 1/8” x 8 1/2” to 12” x 18” (182 mm x 216 mm to 305 mm x 457.2 mm)):

Up to 1,000 sheets (or 5 3/4” (147 mm) in height) If the High Volume Stack Mode is set to 'On':


Up to 4,000 sheets (or 19 1/4” (490 mm) in height)31 LTRR, and Irregular Size (7 1/8” x 8 1/2” to 11 3/4” x 11 3/4” (182 mm x 216 mm to 297 mm x 297 mm)):

Up to 2,000 sheets (or 11 1/4” (285 mm) in height) LGL and Irregular Size (7 1/8” x 11 3/4” to 12” x 17” (182 mm x 297 mm to 305 mm x 432 mm)):

Up to 1,500 sheets32 (or 8 1/2” (216 mm) in height) 12” x 18”, 11” x 17”, and Irregular Size (7 1/8” x 17” or 12” x 7 1/8” to 12” x 18” (182 mm x 432 mm or 305 mm x 182 mm to 305 mm x 457.2 mm)):

Up to 1,000 sheets (or 5 3/4” (147 mm) in height) Staple (Corner) Mode33 Tray B:


Up to 3,000 sheets/200 sets (or 16 5/8” (423 mm) in height) LTRR and Irregular Size (8 1/4” x 8 1/2” to 11 3/4” x 11 3/4” (210 mm x 216 mm to 297 mm x 297 mm)):

Up to 2,000 sheets/200 sets (or 11 1/4” (285 mm) in height) 11” x 17”, LGL, and Irregular Size (8 1/4” x 11 3/4” or 11 3/4” x 7 1/8” to 11 3/4” x 17” (210 mm x 297 mm or 297 mm x 182 mm to 297 mm x 432 mm)):

Up to 1,500 sheets32/200 sets (or 8 1/2” (216 mm) in height) 30 Apply the smallest capacity value of Tray B when differently-sized paper is output. 31 Up to 16 5/8” (423 mm) in height when coated paper is used. 32 Approximately 1,000 sheets when coated paper is used. 33 The Staple mode cannot be used with 13” x 19”, 12 5/8” x 17 3/4”, or 12" x 18" paper sizes.




Item Specifications

Capacity Per Tray30

Staple (Double) Mode Set33 Tray B:


Up to 3,000 sheets/200 sets (or 16 5/8” (423 mm) in height) LTRR and Irregular Size (7 1/8” x 8 1/2” to 11 3/4” x 11 3/4” (182 mm x 216 mm to 297 mm x 297 mm)):

Up to 2,000 sheets/200 sets (or 11 1/4” (285 mm) in height) 11” x 17”, LGL, and Irregular Size (7 1/8” x 11 3/4” or 11 3/4” x 7 1/8” to 11 3/4” x 17” (182 mm x 297 mm or 297 mm x 182 mm to 297 mm x 432 mm)):

Up to 1,500 sheets32/200 sets (or 8 1/2” (216 mm) in height) Z-Fold Mode34 (When the Optional Paper Folding Unit-F1 Is Attached) Tray A: 30 sheets of Z-Fold paper per job Tray B: 10 sheets of Z-Fold paper per copy; 30 sheets of Z-Fold paper per

job Half-Fold Mode (When the Optional Paper Folding Unit-F1 Is Attached) Tray A: Up to 50 sheets/5 sets (each contains 10 sheets)

Maximum Stapling Capacity/Available Staple Size

When the Standard Staple Cartridge Is Attached: (The maximum stapling capacity may vary, depending on the paper type and weight.)

LTR, EXEC, and Irregular Size (7 1/8”35 x 7 1/8” to 11 3/4” x 8 1/2” (182 mm35 x 182 mm to 297 mm x 216 mm)):

Up to 100 sheets (20 lb bond (80 g/m2)) or 98 sheets (20 lb bond (80 g/m2)) + 2 sheets (140 lb index (256 g/m2)) (or stacked up to 1/2” (11 mm) in height)

11” x 17”, LGL, LTRR, and Irregular Size (7 1/8”35 x 8 1/2” to 12” x 17” (182 mm35 x 216 mm to 305 mm x 432 mm)):

Up to 50 sheets (20 lb bond (80 g/m2)) or 48 sheets (20 lb bond (80 g/m2)) + 2 sheets (140 lb index (256 g/m2)) (or stacked up to 1/4” (5.5 mm) in height)

Corner Staple:


Double Staple:


30 Apply the smallest capacity value of Tray B when differently-sized paper is output. 32 Approximately 1,000 sheets when coated paper is used. 33 The Staple mode cannot be used with 13” x 19”, 12 5/8” x 17 3/4”, or 12" x 18" paper sizes. 34 The tray to which LGL and LTR Z fold can be output is limited. A job which includes Z folding may be

routed to the Z fold-appropriate tray, regardless of the delivery tray setting. 35 Approximately 8 1/4” (210 mm) when the Corner Staple Mode is used.



Book

Customer Expectations Document - Canon Global · 2019. 1. 18. · Customer Expectations Document ....

Documents

Transcript of Customer Expectations Document - Canon Global · 2019. 1. 18. · Customer Expectations Document ....