CSC303 Team 1. Introduction Use a Cisco 7600 technology to connect the following networks: 2 OC3...
-
Upload
lorenzo-dennis -
Category
Documents
-
view
222 -
download
0
Transcript of CSC303 Team 1. Introduction Use a Cisco 7600 technology to connect the following networks: 2 OC3...
IntroductionUse a Cisco 7600 technology to connect the
following networks:2 OC3 Ethernets -- fiber2 T3 Ethernets -- fiber8 T1 Ethernets -- twisted pair Cat 530 100baseT networks2 1000baseT uplinks to The Internet
Packet Over SONET/ SDH (POS)Cards Available
Cisco 2-Port OC-3 POS SPACisco 4-Port OC-3 POS SPACisco 1-Port OC-12 POS SPACisco 1-Port OC-192 POS/RPR SPA2-Port OC-48 POS/DPT1-Port OC-48 POS2-Port OC-12 POS4-Port OC-12 POS4-Port OC-3 POS8-Port OC-3 POS16-Port OC-3 POS
Cisco 4-Port OC-3c/STM-1c POS Shared Port Adapter
2 OC3 Ethernets – fiber
http://www.cisco.com/en/US/prod/collateral/modules/ps6267/product_data_sheet0900aecd8027cb4d.html
Serialized/Channelized Cards Available
Cisco 4-Port Serial SPA Data SheetCisco 8-Port Channelized T1/E1 SPACisco 2-Port Channelized T3 SPACisco 4-Port Channelized T3 SPACisco 2-Port Clear Channel T3/E3 SPACisco 4-Port Clear Channel T3/E3 SPA1-Port ChOC-12 to DS31-Port ChOC-12 to DS012-Port CT3 to DS0
Cisco 4-Port Channelized T3 (DS-0) Shared Port Adapter
2 T3 Ethernets -- fiber
http://www.cisco.com/en/US/prod/collateral/modules/ps6267/product_data_sheet0900aecd8027cb3f.html
Ethernet Cards Available Cisco 2-Port GE SPACisco 5-Port GE SPACisco 10-Port GE SPACisco 1-Port 10-GE SPAGE-WAN-2Cisco 4-Port 10GEES20 2-Port 10GEES20 20-Port GEExpress Forwarding 256 10/100/1000
Interface Module10 Gigabit Ethernet
Cisco Express Forwarding 256 10/100/1000 Interface Module
8 T1 Ethernets -- twisted pair Cat 530 100baseT networks2 1000baseT uplinks to The Internet
http://www.cisco.com/en/US/prod/collateral/switches/ps5718/ps708/product_data_sheet0900aecd8017376e_ps4835_Products_Data_Sheet.html
Cisco 7600
http://www.cisco.com/en/US/products/hw/routers/ps368/prod_models_comparison.html
Conclusion Explanation for each cards chosen:
Cisco 4-Port OC-3 POS SPA We decided to choose this card over the others available because it supports four
OC-3 ports in a half card and we will have available ports for future expansions.
Cisco 4-Port Channelized T3 SPA For this type of connection we decided to go with 4 ports for future expansion
and we only had two options: the 4-port channelized T3 SPA and 4-port clear channel T3/E3 SPA
We chose the 4-port channelized because the it is unnecessary to have support for E3 ports (E3 ports are used in European countries).
Cisco Express Forwarding 256 10/100/1000 Interface Module This card supports the remaining requirements for this project, and leave 8
empty ports for future expansion. 8 T1 Ethernets -- twisted pair Cat 5 30 100baseT networks 2 1000baseT uplinks to The Internet
Bibliographyhttp://
www.cisco.com/en/US/products/hw/routers/ps368/products_relevant_interfaces_and_modules.html
http://www.cisco.com/en/US/products/hw/routers/ps368/prod_models_comparison.html
http://www.cisco.com/en/US/products/ps6316/index.html
http://www.cisco.com/en/US/products/hw/routers/ps368/products_relevant_interfaces_and_modules.html