CRM WebClient UI & Netweaver Enterprise Portal...

CRM WebClient UI & Netweaver Enterprise Portal Integration


Contents

INTRODUCTION ......................................................................................................................................... 4

External Integration .................................................................................................................................. 4

Architecture ....................................................................................................................................................... 4

Tight/Classic Integration ........................................................................................................................... 5

Architecture ....................................................................................................................................................... 5

Integration via OBN ................................................................................................................................... 6

PRACTICAL EXAMPLES ............................................................................................................................... 7

External Integration .................................................................................................................................. 7

Map an existing CRM system to Enterprise Portal ............................................................................................ 7

Create an iView ................................................................................................................................................ 12

Create a Portal Role ......................................................................................................................................... 14

Map iView to the Portal Role ........................................................................................................................... 15

Create a Portal user and assign it a Portal Role .............................................................................................. 15

Testing ............................................................................................................................................................. 17

Tight or Classic Integration ...................................................................................................................... 18

Portal Highlighting ........................................................................................................................................... 19

Configuring Portal and CRM ............................................................................................................................ 20

Work Protect Mode (Data Loss Popup) ........................................................................................................... 25

Business Packages (why do you need them) ................................................................................................... 26

Configure CRM’s Mast Head to Appear in Portal’s iView ................................................................................ 26

CRM’s Central Search ...................................................................................................................................... 26

Mapping CRM Skin to Portal Theme ................................................................................................................ 27

Setting the Portal for Business Role Upload from CRM ................................................................................... 27

Exporting Business Role from CRM .................................................................................................................. 30

Importing XML file in Portal ............................................................................................................................. 31

Use the Existing Role Portal Role ..................................................................................................................... 33


3

Assigning Portal Role to User .......................................................................................................................... 33

Testing ............................................................................................................................................................. 34

Clarification and Tips ............................................................................................................................... 34

INTERESTING NOTES ............................................................................................................................... 35

OSS MESSAGE/INCIDENT OPENING TIPS .................................................................................................. 36


4

Introduction During my experience in SAP, I have come across a number of incidents where customers are having issues

integrating CRM (Customer Relationship Management) and EP (Netweaver Enterprise Portal). More often

the reason is that EP is maintained by a different team, having different set of expertise compared to the

team looking after WebClient UI & CRM. In this document I will try to cover two out of three ways to

integrate them, along with some tips, interesting SAP Notes and things to consider when opening an OSS

incident/message. The examples within this document are based on CRM EhP 2 with Enterprise Portal 7.20.

So what are the three ways we can integrate CRM into EP:

1. External Integration

2. Tight/Classic Integration

3. Integration via OBN

External Integration This is the easiest of all the three approaches. EP is used as an entry point to launch CRM’s WebClient UI in

a separate browser window and is responsible for session tracking (login/logoff etc.). CRM’s WUI is

launched in a separate bowser window and acts as a standalone application minus the logoff button. The L-

Shape is maintained and so is the masthead (Help Center, Personalize etc.). You will also be able to see the

back and forward buttons and also Recent Items. Most importantly this is THE ONLY SCENARIO that

supports IC based Business Roles. If you would like the user to have access to multiple Business Roles, this is

the type to use.

Architecture

The CRM Web Client BSP is called via the portal Application Integrator service:


5

In contrast to CRM 5.0 where PC-UI was designed to be running in Portal, the CRM Web Client was originally designed to run standalone (without portal). In CRM standalone navigation, data loss handling, history ... already exists and in the Portal integration we reuse these features if possible and enhanced/exchanged if required.

Tight/Classic Integration When you want to display WebClient UI inside EP’s iView this form of integration is the answer. The L-

Shape and the masthead belong to EP. You can also integrate CRM’s masthead iView to include "Help

Center", "Personalization" and "System News”. In order to avoid the confusions we decided to name them

with CRM as prefix. The back and forward buttons not only keep track of navigation inside the CRM but that

of the Portal as well. You can only display one Business Role at a time, as it is exported in a form of an XML

file which is then imported into the Portal. You can also map Portal theme to a CRM skin.

Architecture

The visible logical link ID of the CRM navigation bar corresponds to a portal iView. Therefore the XML

Export Tool generates the structures according to CRM navigation bar customizing.

The Object Type/Action corresponds to the portal OBN metadata Business Object/Operation.

There are two different kinds of navigation when CRM is running in the Portal:

Navigation via link in portal L-shape -> Portal tells CRM where to go to (via URL parameter crm-logical-link)

Cross Component Navigation (inside CRM) -> CRM navigates always without portal and uses java script to tell portal what to highlight (what to highlight results from roles specific OBN meta data). The CRM roles cross component customizing corresponds to the portal roles OBN metadata. And a field in navigation bar customizing defines what to highlight for what object type/action.


6

Integration via OBN OBN stands for Object Based Navigation. If you want to limit the users to a specific view(s) and not the

standard navigation bar or Business Role this is the one you should use. OBN is beyond the scope of this

document and does not fall under the standard CRM+Portal integration.


7

Practical Examples We will now cover the steps in the two scenarios that are supported in this document:

External Integration In this chapter we will map a CRM system to the Portal, create an iView, create a Portal Role, create Portal

users and connect the dots as we progress.

Map an existing CRM system to Enterprise Portal

1. Login to EP with a user with admin rights.

2. Click on System Administration tab and then on System Configuration

3. Double click on System Landscape (if not already there)

4. Expand Portal Content

5. Right click and select New -> System (from template)

6. Select “SAP system using dedicated application server” or “SAP system with load balancing” as per

your requirement and click on Next


8

7. Fill out System Name and System ID and Master Language and click Next

8. Verify the information and click Finish

9. Now you should be able to see a new subfolder under System with you newly created system

name. Click on the OK button to be ready to configure the system details

10. Access CRM backend and execute transaction SMICM. Once there click on the 3rd icon (Services). If

you have both HTTP & HTTPS configured for your CRM system, select the appropriate one (NOTE:

Ensure that both CRM and EP are using the same protocol – HTTP or HTTPS, otherwise you will

encounter a lot of issues due to domain relaxation) and click on Details and note down the Host


9

Name and Port information

11. Now execute transaction SCC4, on the CRM backend, double click on the correct client and note

down the correct Logical System name


10

12. Fill out the system details based on the information obtained in steps 10 & 11 and click on Save

13. Web AS Path has to be /sap/bw/bex (ensure that this service is activated on the corresponding

CRM system in transaction SICF)


11

14. Right click on the system that you have just created and click on Open -> System Aliases and create

a system alias. This step is necessary for user mapping and click on Save

15. Click on the dropdown and select Connection Test. Select SAP Web AS Connection and ITS

Connection and click on Test to verify connectivity between EP and target CRM system & its ITS


12

Create an iView

1. Now we have to create the link (tab) in the Portal which will be visible to the end users, and this

link will be mapped to the target CRM system. To do so create a new folder in Content

Administrator -> Portal Content. Let’s call it Sandbox

2. Inside the Sandbox folder create another folder. Let’s call it CRM_Ext for now.

3. Now we will be creating an iView. To do so right click inside the CRM_Ext folder and select iView

and iView Wizard will be launched


13

4. Click on Next. In the next screen scroll down and select SAP BSP iView and click on Next

5. Enter a meaningful name and ID for the iView. This will be name of the tab that will be displayed.

For the sake of simplicity you should name it the same. Click on Next

6. BSP Definition Type should be Application. Click on Next

7. Ensure that you maintain the following:

a. Application Parameter crm-ext-integration=true (this is necessary for back & forward

buttons etc)

b. Business Server Page (BSP) Application should be CRM_UI_START

c. Start Page should be set to default.htm


14

d. System should be mapped to the one you created earlier.

8. On the next screen check “Open for editing when wizard completes” and click on Finish

9. When the iView opens for editing set URL-Based Session Tracking to No (For CRM 7.0 and above

this has to be No. For CRM 2007 it has to be Yes).

10. Entry Point = Yes

11. Click on Save

Create a Portal Role

1. Now we will create a Portal Role and assign the newly created iView to that role


15

2. Inside the same folder that you created the iView in, right click and select New->Role

3. Enter meaningful Role Name & ID and click on Next and then Finish

Map iView to the Portal Role

1. Once the Role is created, right click on the iView and select Add iView to Role -> Delta Link

2. Map the iView to the Role you created a few steps ago and click on Save

Create a Portal user and assign it a Portal Role

1. Now it is time to create a Portal user and assign them this particular Role. To do so click on User

Administration -> Identity Management and click on Create User


16

2. Fill out the information in the General Information tab

3. Click on Assigned Roles tab and search for the Role that you created. Select it and click on the Add

button and then click on Save


17

Testing

1. Logout from the Portal (if necessary as IE8 and above shares sessions) and log back in again

with the new user that you have created

2. You will see a tab with the name of the iView that you created


18

3. Once you click on it, CRM WebClient UI will open in a separate browser window

Tight or Classic Integration In this chapter we will cover launchings CRM’s WebClient UI to launch within the Portal’s iView. We will use

the same CRM system that we have defined in the previous section. The steps will include exporting the

XML file from the CRM system, Portal Highlighting, mapping CRM skin to Portal theme and also including

CRM’s Masthead. For this example we shall use standard CRM Business Role SALESPRO. Before we go

ahead with the configuration it need to be clarified that in this type of integration, the BSP application

CRM_UI_PORTAL and its application controller class CL_CRM_PORTAL_APPL_CONTROLLER will be used.

This class contains many implementation parts that differ from the standalone code. The mentioned class

and the standalone implementation use the same super class. This super class already contains important

methods for synchronizing the history entries. All JavaScript functions are combined in the file

//CRM_UI_PORTAL/portal_oo.js.


19

Portal Highlighting

Portal Highlighting is a feature that is only available in Portal. WebClient UI does not offer highlighting. You

can define which entries are highlighted in the cross-component navigation in the portal. Highlighting will

only work if Portal has 1:1 relationship with the CRM backend. Otherwise you might get an error "RFC

connection between CRM and portal is not correctly configured". Most probably not the best error

message. You can suppress this message (see Interesting Notes section). Highlighting means the special

marking of an object to distinguish it from others, for example, color, bold border, and so on. Each Business

Role has a corresponding Navigation Bar Profile that is assigned to it. So for Business Role SALESPRO the

Navigation Bar Profile is SLS-PRO.

You can define highlighting in the CRM for Portal in IMG Customer Relationship Management -> UI Framework -> Technical Role Definition -> Define Navigation Bar Profile: Select your business role under Define Profile and select one of the following folders:

Under Define Generic OP Mapping, you can enter the logical link in the field Highlight.

Under Override Generic OP Mapping for Component, you can define the highlighting for exceptions of single components.

Example: Business Role: Sales Professional Navigation Bar Profile = SLS-PRO Object Type: BP_ACCOUNT Object Action: Display Target ID: MD-BP-OV Highlight: MD-BP-SR -> the logical link to be highlighted is the Account search page.

You enter a logical link in the Highlight field; this logical link needs to be assigned to a work center in the same navigation bar profile. The system evaluates the logical link entered in this field and highlights the corresponding work center in the portal. No entry in the Highlight field means that there is no highlighting of cross-component navigation. The CRM backend has to call a web service of the portal to do a correct


20

highlighting of the (portal) menu entries. For this an RFC connection with a logical port is necessary and both systems have to trust each other. If anything is not configured correctly the highlighting will not work completely and an error message will occur within the CRM views. Nevertheless you can work with the CRM content. Note:

Configuring Portal and CRM

In this step we will configure CRM system in Portal and create RFC destination from CRM back to Portal.

1. Ensure that the System Alias is configured for your CRM system in EP (we have already done this in

the previous chapter). In EP click on System Administration -> System Configuration -> System

Landscape -> Portal Content -> System. Double Click on the CRM system. From the Display

dropdown select System Alias

Or you can simply right click on the system name and select System Alias


21

2. Now we are going to create a connection from CRM backend to the Portal. Execute transaction

SM59 on CRM backend.

3. Expand HTTP connections to External Servers

4. Click on New

5. Enter the following settings under Technical Settings tab

a. RFC Destination = CRM_EP_DEST (this has to be entered exactly like that)

b. Description 1 = enter a meaningful description

c. Target Host = Fully qualified host name of your Portal

d. Service No.= port number of your Portal


22

e. Path Prefix = /irj/servlet/prt/soap/OBNWebService?style=doc_lit (this has to be entered

exactly like that)

6. Enter the following settings under Logon & Security tab

a. Deactivate Basic Authentication

b. Select Send Logon Ticket Without Ref. to a Target System


23

c. SSL would depend on your landscape

7. Save your settings

8. Now we have to create a logical port for OBN for highlighting. Execute transaction LPCONFIG

(Maintain Logical Ports). You may get a popup stating that the transaction may be obsolete. Please

disregard it and continue

9. Enter the following settings and click on the create/new button

a. Proxy Class = CO_WDR_OBNWEB_SERVICE

b. Logical Port = CRM_EP_DEST

c. Provide a meaningful description


24

d. Under General Settings -> click on the Calls Parameters tab

HTTP Destination = CRM_EP_DEST

e. Click on the Operations tab

f. There should be 7 entries. Maintain the following SOAP Actions for them (Consult Note

1224422). Ensure that you enter the SOAP Actions including the “”

Operation SOAP Action

GET_DEFAULT_TARGET "prt:service:com.sap.portal.obnwebservice.OBNWebService.OBNWebService/getDefaultTarget0"

GET_DEFAULT_TFO "prt:service:com.sap.portal.obnwebservice.OBNWebService.OBNWebService/getDefaultTFO0"

GET_TARGETS "prt:service:com.sap.portal.obnwebservice.OBNWebService.OBNWebService/getTargets0"

GET_TFO "prt:service:com.sap.portal.obnwebservice.OBNWebService.OBNWebService/getTFO0"

IS_TARGET_EXIST "prt:service:com.sap.portal.obnwebservice.OBNWebService.OBNWebService/isTargetExist0"

IS_TARGET_EXISTS_FO "prt:service:com.sap.portal.obnwebservice.OBNWebService.OBNWebService/isTargetExistsFO0"

TEST_DATA_TRANSMIT "prt:service:com.sap.portal.obnwebservice.OBNWebService.OBNWebService/testDataTransmit0"

g. Save and Activate the port

10. Export and import of certificates for SSO are beyond the scope of this document. However you can

take a look at Note 1083421


25

Work Protect Mode (Data Loss Popup)

As you may already know WebClient UI has a data loss popup. Similarly Portal has its own data loss popup.

In order to avoid conflict or multiple data loss popups, Work Protect Mode has to be set in the Portal.

1. Logon to Portal

2. Click on System Administration -> System Configuration -> Service Configuration

3. Expand Applications -> com.sap.portal.epcf.loader -> Services 4. Double click on epcfloader. 5. Enter the following settings

a. workprotect.mode.default = 3 b. workprotect.mode.personalize = on c. workprotect.window.features = empty


26

d. Click on Save

Business Packages (why do you need them)

Portal has its own masthead. You may have a requirement to display links from CRM’s masthead, for

example Help Center, System News etc. and CRM’s Central Search. To do so you would need to install the

following packages in your Portal:

BP CRM FOUNDATION CODING

BP CRM FOUNDATION CONTENT

BP CRM APPLICATION CONTENT

BP CRM APPLICATION CODING

To get the CRM Business Package for portal integration, please go to http://service.sap.com/swdc. Expand

Support Packages and Patches -> click on Search for Support Packages and Patches. In Search term filed

enter 'BP CRM Foundation' (without quotes) and trigger the search. And then in Search Term filed enter 'BP

CRM APPLICATION' (without quotes) and trigger the search. Installation of Business Packages are beyond

the scope of this document and you should contact your Portal experts for assistance.

Configure CRM’s Mast Head to Appear in Portal’s iView

Once the Business Packages are installed you can perform the following steps to display CRM’s Mast Head.

In addition to standard portal functions (Log Off, Personalize, and Help) the CRM Masthead iView contains

links that lead to the following CRM functions (to avoid the confusions SAP has decided to name them with

CRM as prefix:

CRM Personalization

CRM Help Center

CRM System News

You can either hide or display these links

1. Select Content Administration -> Portal Content 2. Expand Portal Content -> Content Provided by SAP -> specialist -> CRM Foundation -> CRM

Masthead 3. Choose the following links and select Yes if you want to display them

a. Show Link in Masthead: CRM Help Center b. Show Link in Masthead: CRM Personalize c. Show Link in Masthead: CRM System News

CRM’s Central Search

The CRM Tools iView which contains the CRM central search contains CRM-specific properties that are

grouped under the property category CRM Portal. It is here where you can define the settings for the CRM

central search.

1. Select Content Administration -> Portal Content -> Content Provided by SAP -> specialist -> CRM Foundation

2. Double click on com.sap.crm.fnd.crmfoundation 3. Select CRM Tools 4. Select the property category CRM Portal


27

5. Here you can define properties like CRM System Alias, Enable KM Search in CRM Central Search, Use Dropdown Boxes or Dynamic Behavior, Use Generic Error Messages, Width etc

Mapping CRM Skin to Portal Theme

CRM WebClient UI’s look and feel compared to the Portal is quite different. However a mapping table

CRMC_THEME_TO_SKIN between CRM skin and Portal theme is pre-delivered and can be changed.

1. Execute transaction SPRO on the CRM backend

2. SAP Reference IMG -> Customer Relationship Management -> UI Framework -> Portal Integration ->

Map Portal Theme to CRM Skin

This is only evaluated if in Personalization checkbox "Follow Portal Theme" is checked – a new field in

Personalization view. The portal theme name is retrieved from URL parameter crm-portal-theme and in

CL_THTMLB_PERSONALIZATION, method GET_SKINS it checks whether it is launched from the Portal and

"Follow Portal Theme" is personalized. Only then the mapping portal theme - CRM skin is called to get the

mapped CRM skin.

Setting the Portal for Business Role Upload from CRM

As I mentioned earlier, that for tight/classical integration we have to export the Business role from CRM.

But before we do that we need to get a container (PCD) ready on the Portal side. Once that is done we use

the export tool of CRM to generate the XML file. The generation is role based. You enter CRM business role

together with other parameters, and then start the report, which examines the navigation bar structures,


28

extract the required data and writes it to the XML. The user can decide whether the generated work

centers are displayed in the detailed navigation, in the second or first level of the top-level navigation bar in

the Portal. Note: It has no multi-language support - only one language can be exported from CRM and

imported to Portal.

1. In Portal click on Content Administration -> Portal Content

2. Right click and click on New -> Folder


29

3. Give it a meaningful name & ID (for our example we will name it Sandbox)

4. Select Sandbox (or the folder that you have just created and right click -> New -> Folder (to create a

new sub-folder)

5. Give it a meaningful name & ID (for our example we will name it CRM Roles)


30

6. The PCD path for this newly created folder is the one that we will use when we generate the XML

file in CRM (pcd:portal_content/Sandbox/CRM_Roles)

Exporting Business Role from CRM

Now we are ready to generate an XML file based upon the Business Role of our choice from CRM.

1. Login to CRM backend

2. Execute transaction SPRO -> SAP Reference IMG -> Customer Relationship Management -> UI

Framework -> Portal Integration -> Upload Business Role

3. Fill out the following information

a. CRM Business Role = SALESPRO (select any non-IC based Business Role of your choice)

b. Generate = leave the settings as default

c. Path in PCD = pcd:portal_content/Sandbox/CRM_Roles (or the one you created)


31

d. Main Folder Name = CRM_Roles (or the one you created in Portal)

e. CRM System in Portal = The CRM system that you configured in Portal in step Configuring

Portal and CRM

f. Collection = DEFAULT_COLLECTION

g. Path = where you want to export the generated XML file

h. Click on execute button

Importing XML file in Portal

Now we have to use Portal’s import tool

1. Login to Portal

2. Click on System Administration -> Transport ->


32

3. Double click on Import

4. Click on the browse Button to browse to the path where you have saved the generated XML file

5. Click on Execute


33

Use the Existing Role Portal Role

You can use the existing Role that was uploaded with the iView instead of creating a new one.

Assigning Portal Role to User

For our testing purposes we will assign the newly created role to the user.

1. Click on User Administration -> Identity Management and search for user testuser

2. Click on Modify button


34

3. Click on Assigned Roles tab and search for the Role *SALESPRO*. You will find a Role by the

description CRM

4. Click on Add and then Save

Testing

Logout of Portal and log back in again with testuser. You can now see a new tab called CRM. By clicking on

it you will be able to launch CRM’s WebClient UI in Portal’s iView

Clarification and Tips Unlike CRM WebClient UI where an entry is added to the history when you navigate away from the

view, in Portal an entry is added to its history as soon as you navigate to a particular view. Portal

not only stores history of navigation within a particular iView but also the history of cross iView

navigation. If you encounter an issue with history you should put a breakpoint in class

CL_CRM_PORTAL_APPL_CONTROLLER method GET_HISTORY_STATE ()

If you encounter an issue where either by navigating away from CRM’s iView (tight integration), or

by closing the CRM’s WebClient UI window (external integration) the SSO2 cookie is destroyed, and


35

would like to narrow down as to who the culprit is (CRM or Portal), you can do a test modification.

The place would be BSP CRM_UI_START/crmuifServer.js. Comment every call of delSsO2Cookie.

This way you can at least prove whether it is the CRM that is deleting the cookie.

The login to the portal puts the authentication cookie MYSAPSSO2 into the browser cache. This

cookie is valid for a certain domain. The cookie is attached to each and every request from the

browser to any target in the validity domain. Now it depends a bit on your browser version and on

how you open the new window.

If you just use File -> New Window, then the cookie is shared with the new window.

If you start new IE session by Start -> Programs -> Internet Explorer, then it is a completely

separate session. The cookie is not shared.

If you have IE8 then you can use File -> New Session, which is similar to the second list

item.

Now if the cookie is shared, then the browser will attach it to the CRM request. The CRM server

detects the cookie and sees that it was originally issued by the portal system. As the CRM system

does not trust the portal system it does not allow the cookie for authentication and the login page

is displayed. So either you should set up a trust relationship or use separate sessions.

If you would like to display Ajax Framework Page, your WEBCUIF release should be atleast 701 and

above and Enterprise Portal 7.30 or higher.

Recent Items that are displayed in WebClient UI and CRM’s favorites are not supported in

tight/classic CRM + Portal Integration, as the Portal takes over the navigation the back and forward

buttons keep track of the history, and keeps track of its own favorites.

Interesting Notes 1353456 How to launch the WebClient UI from the portal (7.0) 1175590 How to launch IC WebClient from the portal (2007) 625351 MYSAPSSO2 cookie will be deleted completely when 941880 Print button is inactive in CRM Portal application 914889 User's Portal Session cookie needs to be terminated 701205 Single Sign-On using SAP Logon Tickets

https://service.sap.com/sap/support/notes/1353456







36

654982 URL requirements due to Internet standards 550742 FAQ: General questions about Single Sign-On 1045035 Cookie MYSAPSSO2 is deleted 1365586 Simplify Portal Detection 1436653 Broken link "1x1.gif" in external CRM integration in portal 1114564 Closing ICWC from portal does not delete sessions from sm04 1318994 Hanging session when IC webclient is closed from the 1230346 ITS sessions hang if IC WebClient runs within Portal 1096353 Locks remain in CRM 1029194 Portal - Integrated ITS - Session Management 1027676 Problems using SAP Web dispatcher and Apache proxy 604599 BSP: Session is not terminated by the Portal 1147394 Error message "Session timeout" when using Portals 1427190 ABAP sessions are displaced for applications in the portal 1175127 Missing breadcrumbs in external CRM integration in portal 1478094 CRM IC: Framework, Portal integration, kill worker session 1536436 New CRM portal window with error about session mismatch 755947 Session Release Agent - Guest Access (logoff brings to logon) 1175127 Missing breadcrumbs in external CRM integration in portal 947376 Troubleshooting JCo and AdaptiveRFC in Web Dynpro for JAVA 1486002 Generate session url data for use in thtmlbCSessionURL (requested session does not match

the current session) 1643446 Nonsecure Content Warning For Theme Resources When Calling the Portal Via a Load

Balancer / Reverse Proxy 1803630 BSP Portal Session Termination doesn't work correctly 1772736 Getting Netweaver Login screen when users trying to logoff 1898854 Error: RFC connection between CRM and portal is not correctly configured 1911070 Logoff and Back/forward buttons missing in WebClient UI or Solution Manager 1566833 SAP CRM running in SAP NetWeaver Portal: Simple Search 1253217 Duplicate entries in breadcrumbs history 1277211 Missing update of BreadCrumb history 1130396 Portal History - Corrections 1266752 Portal History: JavaScript Error 1276652 Incorrect Behavior of Portal Back 1604669 URL parameters of history entries have wrong format

OSS Message/Incident Opening Tips If you are unable to resolve the issue you are facing and need to open an OSS message for SAP kindly

ensure the following:

1. For internal and external integration issues open message under CA-WUI-EP

2. If you are using OBN then you should open a message under EP-PIN-NAV component

3. If you are using an IC based Business Role and your requirement is for it to launch within

the Portal’s iView rather than in a separate browser window, IT IS NOT SUPPORTED

4. If you launch CRM within the Portal’s iView and see a list of Business Roles, then you

configuration is incorrect. It should be external integration. Chances are that your iView is

configured incorrectly



































37

5. Always try to reproduce the issue in CRM standalone. If you can duplicate the problem,

then the issue is not with Portal and you can open an OSS message under the

corresponding component

6. Ensure that both Portal and CRM are using the same protocol, reside in the same domain

and are in the same Security Zone (IE)

7. Launching either Portal or WebClient UI using IP addresses instead of FQHN (fully qualified

hostnames) is not supported

8. When opening a message be sure to

- advise which Portal system SAP should connect to

- its target CRM system

- detailed steps to duplicate

- PCD path to the iView

- provide a user that has Admin access to the Portal to check the iView configuration

- a backend CRM user with authorization to check customizing & debugging

- make sure that both the Portal’s URL and the corresponding URL of CRM are

accessible over SAPROUTER

- duplicate and record the issue using HTTP Watch and attach it to the message

www.sap.com

© 2013 SAP AG. All rights reserved.

SAP, R/3, SAP NetWeaver, Duet, PartnerEdge, ByDesign, SAP

BusinessObjects Explorer, StreamWork, SAP HANA, and other SAP

products and services mentioned herein as well as their respective

logos are trademarks or registered trademarks of SAP AG in Germany

and other countries.

Business Objects and the Business Objects logo, BusinessObjects,

Crystal Reports, Crystal Decisions, Web Intelligence, Xcelsius, and

other Business Objects products and services mentioned herein as

well as their respective logos are trademarks or registered trademarks

of Business Objects Software Ltd. Business Objects is an SAP

company.

Sybase and Adaptive Server, iAnywhere, Sybase 365, SQL

Anywhere, and other Sybase products and services mentioned herein

as well as their respective logos are trademarks or registered

trademarks of Sybase Inc. Sybase is an SAP company.

Crossgate, m@gic EDDY, B2B 360°, and B2B 360° Services are

registered trademarks of Crossgate AG in Germany and other

countries. Crossgate is an SAP company.

All other product and service names mentioned are the trademarks of

their respective companies. Data contained in this document serves

informational purposes only. National product specifications may vary.

These materials are subject to change without notice. These materials

are provided by SAP AG and its affiliated companies ("SAP Group")

for informational purposes only, without representation or warranty of

any kind, and SAP Group shall not be liable for errors or omissions

with respect to the materials. The only warranties for SAP Group

products and services are those that are set forth in the express

warranty statements accompanying such products and services, if

any. Nothing herein should be construed as constituting an additional

warranty.

.

CRM WebClient UI & Netweaver Enterprise Portal...

Documents

Transcript of CRM WebClient UI & Netweaver Enterprise Portal...