CRL HANDRAIL SYSTEMS - C.R. Laurence
Transcript of CRL HANDRAIL SYSTEMS - C.R. Laurence
CRL HANDRAIL SYSTEMS
C.R. LAURENCE of AUSTRALIA Pty Ltd | crlaurence.com.au
CA
T. NO
. CA
TH
R
AVDB4375_10/20
C.R. LAURENCE of AUSTRALIA Pty Ltd.
38MM DIAMETER HANDRAIL
38MM DIAMETER TUBECAT. NO. FINISH
HR38BSHR38PS
Brushed Stainless Steel Polished Stainless Steel
DOMED END CAPCAT. NO. FINISH
HR38DBSHR38DPS
Brushed Stainless Steel Polished Stainless Steel
ADJUSTABLE ELBOW CONNECTORCAT. NO. FINISH
HR38ADJBSHR38ADJPS
Brushed Stainless Steel Polished Stainless Steel
FLAT END CAPCAT. NO. FINISH
HR38FBSHR38FPS
Brushed Stainless Steel Polished Stainless Steel
RADIUS 90 DEGREE CONNECTORCAT. NO. FINISH
HR38CBSHR38CPS
Brushed Stainless Steel Polished Stainless Steel
90 DEGREE CONNECTORCAT. NO. FINISH
HR38HBSHR38HPS
Brushed Stainless Steel Polished Stainless Steel
38mm Diameter Tube
Domed End Cap
• Made of 316 stainless steel
• 6000mm long
• Available in Brushed and Polished Stainless
Steel
• 38mm diameter
• 1.6mm Wall Thickness
• Made of 316 stainless steel
• Available in Brushed and Polished Stainless
Steel
• Suited for 38mm diameter tubing
• 32629 Metal contact cement and 7649
Primer can be used for a secure and
permanent bond
Adjustable Elbow Connector
Flat End Cap
• Made of 316 stainless steel
• Available in Brushed and Polished Stainless
Steel
• Suited for 38mm diameter tubing
• 32629 Metal contact cement and 7649
Primer can be used for a secure and
permanent bond
• Made of 316 stainless steel
• Available in Brushed and Polished Stainless
Steel
• Suited for 38mm diameter tubing
• 32629 Metal contact cement and 7649
Primer can be used for a secure and
permanent bond
Radius 90 Degree Connector
90 Degree Connector
• Made of 316 stainless steel
• Available in Brushed and Polished Stainless
Steel
• Suited for 38mm diameter tubing
• 32629 Metal contact cement and 7649
Primer can be used for a secure and
permanent bond
• Made of 316 stainless steel
• Available in Brushed and Polished Stainless
Steel
• Suited for 38mm diameter tubing
• 32629 Metal contact cement and 7649
Primer can be used for a secure and
permanent bond
2
email: [email protected] | crlaurence.com.au
38MM DIAMETER HANDRAIL
3 WAY 90 DEGREE CONNECTORCAT. NO. FINISH
HR38JBSHR38JPS
Brushed Stainless Steel Polished Stainless Steel
MITERED 90 DEGREE CONNECTORCAT. NO. FINISH
HR38MCBSHR38MCPS
Brushed Stainless Steel Polished Stainless Steel
FLUSH TEE CONNECTORCAT. NO. FINISH
HR38KBSHR38KPS
Brushed Stainless Steel Polished Stainless Steel
FLUSH CROSS CONNECTORCAT. NO. FINISH
HR38NBSHR38NPS
Brushed Stainless Steel Polished Stainless Steel
MITERED 135 DEGREE CONNECTORCAT. NO. FINISH
HR38MBSHR38MPS
Brushed Stainless Steel Polished Stainless Steel
ADJUSTABLE FLANGECAT. NO. FINISH
HR38PFBSHR38PFPS
Brushed Stainless Steel Polished Stainless Steel
3 Way 90 Degree Connector
Mitered 90 Degree Connector
• Made of 316 stainless steel
• Available in Brushed and Polished Stainless
Steel
• Suited for 38mm diameter tubing
• 32629 Metal contact cement and 7649
Primer can be used for a secure and
permanent bond
• Made of 316 stainless steel
• Available in Brushed and Polished Stainless
Steel
• Suited for 38mm diameter tubing
• 32629 Metal contact cement and 7649
Primer can be used for a secure and
permanent bond
Flush Tee Connector
Flush Cross Connector
• Made of 316 stainless steel
• Available in Brushed and Polished Stainless
Steel
• Suited for 38mm diameter tubing
• 32629 Metal contact cement and 7649
Primer can be used for a secure and
permanent bond
• Made of 316 stainless steel
• Available in Brushed and Polished Stainless
Steel
• Suited for 38mm diameter tubing
• 32629 Metal contact cement and 7649
Primer can be used for a secure and
permanent bond
Mitered 135 Degree Connector
Adjustable Flange
• Made of 316 stainless steel
• Available in Brushed and Polished Stainless
Steel
• Suited for 38mm diameter tubing
• 32629 Metal contact cement and 7649
Primer can be used for a secure and
permanent bond
• Made of 316 stainless steel
• Available in Brushed and Polished Stainless
Steel
• Suited for 38mm diameter tubing
• 32629 Metal contact cement and 7649
Primer can be used for a secure and
permanent bond
3
C.R. LAURENCE of AUSTRALIA Pty Ltd.
38MM DIAMETER HANDRAIL
ROTATING CONNECTORCAT. NO. FINISH
HR38R0TBSHR38R0TPS
Brushed Stainless Steel Polished Stainless Steel
FLUSH ANGLE END CAPCAT. NO. FINISH
HR38RBSHR38RPS
Brushed Stainless Steel Polished Stainless Steel
FULL FLANGECAT. NO. FINISH
HR38YBSHR38YPS
Brushed Stainless Steel Polished Stainless Steel
Rotating Connector
• Made of 316 stainless steel
• Available in Brushed and Polished Stainless
Steel
• Suited for 38mm diameter tubing
• 32629 Metal contact cement and 7649
Primer can be used for a secure and
permanent bond
Flush Angle End Cap
• Made of 316 stainless steel
• Available in Brushed and Polished Stainless
Steel
• Suited for 38mm diameter tubing
• 32629 Metal contact cement and 7649
Primer can be used for a secure and
permanent bond
Full Flange
• Made of 316 stainless steel
• Available in Brushed and Polished Stainless
Steel
• Suited for 38mm diameter tubing
• 32629 Metal contact cement and 7649
Primer can be used for a secure and
permanent bond
4
email: [email protected] | crlaurence.com.au
50MM DIAMETER HANDRAIL
50MM DIAMETER TUBECAT. NO. FINISH
HR50BSHR50PS
Brushed Stainless Steel Polished Stainless Steel
ADJUSTABLE CONNECTORCAT. NO. FINISH
HR50ADJBSHR50ADJPS
Brushed Stainless Steel Polished Stainless Steel
90 DEGREE RADIUS CONNECTORCAT. NO. FINISH
HR50CBSHR50CPS
Brushed Stainless Steel Polished Stainless Steel
DOMED END CAPCAT. NO. FINISH
HR50DBSHR50DPS
Brushed Stainless Steel Polished Stainless Steel
50mm Diameter Tube
• Made of 316 stainless steel
• 6000mm long
• Available in Brushed and Polished Stainless
Steel
• 50mm diameter
• 1.6mm Wall Thickness
Adjustable Connector 90 Degree Radius Connector
• Made of 316 stainless steel
• Available in Brushed and Polished Stainless
Steel
• Suited for 50mm diameter tubing
• 32629 Metal contact cement and 7649
Primer can be used for a secure and
permanent bond
• Made of 316 stainless steel
• Available in Brushed and Polished Stainless
Steel
• Suited for 50mm diameter tubing
• 32629 Metal contact cement and 7649
Primer can be used for a secure and
permanent bond
Domed End Cap
• Made of 316 stainless steel
• Available in Brushed and Polished Stainless
Steel
• Suited for 50mm diameter tubing
• 32629 Metal contact cement and 7649
Primer can be used for a secure and
permanent bond
5
FLAT END CAPCAT. NO. FINISH
HR50FBSHR50FPS
Brushed Stainless Steel Polished Stainless Steel
90 DEGREE CONNECTORCAT. NO. FINISH
HR50HBSHR50HPS
Brushed Stainless Steel Polished Stainless Steel
Flat End Cap
• Made of 316 stainless steel
• Available in Brushed and Polished Stainless
Steel
• Suited for 50mm diameter tubing
• 32629 Metal contact cement and 7649
Primer can be used for a secure and
permanent bond
90 Degree Connector
• Made of 316 stainless steel
• Available in Brushed and Polished Stainless
Steel
• Suited for 50mm diameter tubing
• 32629 Metal contact cement and 7649
Primer can be used for a secure and
permanent bond
C.R. LAURENCE of AUSTRALIA Pty Ltd.
50MM DIAMETER HANDRAIL
FLUSH CROSS CONNECTORCAT. NO. FINISH
HR50NBSHR50NPS
Brushed Stainless Steel Polished Stainless Steel
FLUSH TEE CONNECTORCAT. NO. FINISH
HR50KBSHR50KPS
Brushed Stainless Steel Polished Stainless Steel
ADJUSTABLE FLANGECAT. NO. FINISH
HR50PFBSHR50PFPS
Brushed Stainless Steel Polished Stainless Steel
MITERED 135 DEGREE CONNECTORCAT. NO. FINISH
HR50MBSHR50MPS
Brushed Stainless Steel Polished Stainless Steel
3 WAY 90 DEGREE CONNECTORCAT. NO. FINISH
HR50JBSHR50JPS
Brushed Stainless Steel Polished Stainless Steel
MITERED 90 DEGREE CONNECTORCAT. NO. FINISH
HR50MCBSHR50MCPS
Brushed Stainless Steel Polished Stainless Steel
Flush Cross Connector
Flush Tee Connector
• Made of 316 stainless steel
• Available in Brushed and Polished Stainless
Steel
• Suited for 50mm diameter tubing
• 32629 Metal contact cement and 7649
Primer can be used for a secure and
permanent bond
• Made of 316 stainless steel
• Available in Brushed and Polished Stainless
Steel
• Suited for 50mm diameter tubing
• 32629 Metal contact cement and 7649
Primer can be used for a secure and
permanent bond
Adjustable Flange
Mitered 135 Degree Connector
• Made of 316 stainless steel
• Available in Brushed and Polished Stainless
Steel
• Suited for 50mm diameter tubing
• 32629 Metal contact cement and 7649
Primer can be used for a secure and
permanent bond
• Made of 316 stainless steel
• Available in Brushed and Polished Stainless
Steel
• Suited for 50mm diameter tubing
• 32629 Metal contact cement and 7649
Primer can be used for a secure and
permanent bond
3 Way 90 Degree Connector
Mitered 90 Degree Connector
• Made of 316 stainless steel
• Available in Brushed and Polished Stainless
Steel
• Suited for 50mm diameter tubing
• 32629 Metal contact cement and 7649
Primer can be used for a secure and
permanent bond
• Made of 316 stainless steel
• Available in Brushed and Polished Stainless
Steel
• Suited for 50mm diameter tubing
• 32629 Metal contact cement and 7649
Primer can be used for a secure and
permanent bond
6
email: [email protected] | crlaurence.com.au
50MM DIAMETER HANDRAIL
FLUSH ANGLE END CAPCAT. NO. FINISH
HR50RBSHR50RPS
Brushed Stainless Steel Polished Stainless Steel
CUT FLANGE CAT. NO. FINISH
HR50ZBSHR50ZPS
Brushed Stainless Steel Polished Stainless Steel
ROTATING CONNECTORCAT. NO. FINISH
HR50R0TBSHR50R0TPS
Brushed Stainless Steel Polished Stainless Steel
Flush Angle End Cap
• Made of 316 stainless steel
• Available in Brushed and Polished Stainless
Steel
• Suited for 50mm diameter tubing
• 32629 Metal contact cement and 7649
Primer can be used for a secure and
permanent bond
Cut Flange
• Made of 316 stainless steel
• Available in Brushed and Polished Stainless
Steel
• Suited for 50mm diameter tubing
• 32629 Metal contact cement and 7649
Primer can be used for a secure and
permanent bond
Rotating Connector
• Made of 316 stainless steel
• Available in Brushed and Polished Stainless
Steel
• Suited for 50mm diameter tubing
• 32629 Metal contact cement and 7649
Primer can be used for a secure and
permanent bond
7
POST MOUNT ADJUSTABLE RADIUS SADDLECAT. NO. FINISH
HR50ARBSHR50ARPS
Brushed Stainless Steel Polished Stainless Steel
Post Mount Adjustable Radius Saddle
• Made of 316 stainless steel
• Adjustable Saddle
• Available in Brushed and Polished Stainless
Steel
• Suited for 50mm diameter tubing
• 32629 Metal contact cement and 7649
Primer can be used for a secure and
permanent bond
POST MOUNT ADJUSTABLE FLAT SADDLECAT. NO. FINISH
HR50ASBSHR50ASPS
Brushed Stainless Steel Polished Stainless Steel
Post Mount Adjustable Flat Saddle
• Made of 316 stainless steel
• Adjustable Saddle
• Suited for flat handrail
• Available in Brushed and Polished Stainless
Steel
• Connection to 50mm diameter tubing
• 32629 Metal contact cement and 7649
Primer can be used for a secure and
permanent bond
C.R. LAURENCE of AUSTRALIA Pty Ltd.
HANDRAIL BRACKETS
ADJUSTABLE SADDLE WALL MOUNT HANDRAIL BRACKET
CAT. NO. FINISH
HRBK1BSHRBK1PS
Brushed Stainless Steel Polished Stainless Steel
ADJUSTABLE SADDLE GLASS MOUNT HANDRAIL BRACKET
CAT. NO. FINISH
HRBK4BSHRBK4PS
Brushed Stainless Steel Polished Stainless Steel
WALL MOUNT HANDRAIL BRACKETCAT. NO. FINISH
HRBK2BSHRBK2PS
Brushed Stainless Steel Polished Stainless Steel
WALL MOUNT HANDRAIL BRACKETCAT. NO. FINISH
HRBK5BSHRBK5PS
Brushed Stainless Steel Polished Stainless Steel
ADJUSTABLE WALL MOUNT HANDRAIL BRACKETCAT. NO. FINISH
HRBK331BSHRBK331PS
Brushed Stainless Steel Polished Stainless Steel
GLASS MOUNT HANDRAIL BRACKETCAT. NO. FINISH
HRBK3BSHRBK3PS
Brushed Stainless Steel Polished Stainless Steel
Adjustable Saddle Wall Mount Handrail Bracket
Adjustable Saddle Glass Mount Handrail Bracket
• Made of 316 stainless steel
• Suits 38mm or 50mm diameter tubing
• Adjustable Saddle
• Available in Brushed and Polished Stainless
Steel
• Pushfit cover plate hides wall fixings
• Supplied with wall anchors, washers and
rivets for installation
• Made of 316 stainless steel
• Suits 38mm or 50mm diameter tubing
• Adjustable Saddle
• Available in Brushed and Polished Stainless
Steel
• Suited for 10mm - 13.52mm thick glass
• Supplied with washers and rivets for
installation
Wall Mount Handrail Bracket
Wall Mount Handrail Bracket Adjustable Wall Mount Handrail Bracket
• Made of 316 stainless steel
• Suits 38mm or 50mm diameter tubing
• Available in Brushed and Polished Stainless
Steel
• Pushfit cover plate hides wall fixings
• Supplied with wall anchors, washers and
rivets for installation
• Made of 316 stainless steel
• Suits 38mm or 50mm diameter tubing
• Available in Brushed and Polished Stainless
Steel
• 3 Hole countersunk wall fixing plate
• Supplied with wall anchors and rivets for
installation
• Made of 316 stainless steel
• Suits 38mm or 50mm diameter tubing
• Adjustable saddle and arm height
• Available in Brushed and Polished Stainless
Steel
• Pushfit cover plate hides wall fixings
• Supplied with wall anchors, washers and
rivets for installation
Glass Mount Handrail Bracket
• Made of 316 stainless steel
• Suits 38mm or 50mm diameter tubing
• Available in Brushed and Polished Stainless
Steel
• Suited for 10mm - 13.52mm thick glass
• Supplied with washers and rivets for
installation
8
email: [email protected] | crlaurence.com.au
HANDRAIL BRACKETS
9
ADJUSTABLE GLASS MOUNT HANDRAIL BRACKETCAT. NO. FINISH
HRBK324BSHRBK324PS
Brushed Stainless Steel Polished Stainless Steel
FLAT HANDRAIL ADAPTER PLATECAT. NO. FINISH
HRBKFS01BSHRBKFS01PS
Brushed Stainless Steel Polished Stainless Steel
Adjustable Glass Mount Handrail Bracket
• Made of 316 stainless steel
• Suits 38mm or 50mm diameter tubing
• Adjustable saddle and arm height
• Available in Brushed and Polished Stainless
Steel
• Suited for 10mm - 13.52mm thick glass
• Supplied with washers and rivets for
installation
Flat Handrail Adapter Plate
• Flat handrail adapter plate designed for the
HRBK331 & HRBK324 handrail brackets
50 X 10MM RECTANGULAR HANDRAIL
50mm x 10mm Flat Rail
• Made of 316 stainless steel
• 50mm x 10mm Profile
• 6000mm long
• Available in Brushed Stainless, Polished
Stainless and Matt Black
• 1.6mm Wall Thickness
Inline Connector
90 Degree Connector
• Made of 316 stainless steel
• Available in Brushed Stainless, Polished
Stainless and Matt Black
• 32629 Metal contact cement and 7649
Primer can be used for a secure and
permanent bond
• Made of 316 stainless steel
• Available in Brushed Stainless, Polished
Stainless and Matt Black
• 32629 Metal contact cement and 7649
Primer can be used for a secure and
permanent bond
End Cap
Vertical Adjustable Connector
• Made of 316 stainless steel
• Available in Brushed Stainless, Polished
Stainless and Matt Black
• 32629 Metal contact cement and 7649
Primer can be used for a secure and
permanent bond
• Made of 316 stainless steel
• Adjustable from 130° to 180° Vertically
• Available in Brushed Stainless, Polished
Stainless and Matt Black
• 32629 Metal contact cement and 7649
Primer can be used for a secure and
permanent bond
Wall Connector
• Made of 316 stainless steel
• Available in Brushed Stainless, Polished
Stainless and Matt Black
• 32629 Metal contact cement and 7649
Primer can be used for a secure and
permanent bond
C.R. LAURENCE of AUSTRALIA Pty Ltd.10
FLAT RAILCAT. NO. FINISH
HRS5010BSHRS5010PSHRS5010MBL
Brushed Stainless SteelPolished Stainless Steel
Matt Black
INLINE CONNECTORCAT. NO. FINISH
HRS5010CBSHRS5010CPSHRS5010CMBL
Brushed Stainless SteelPolished Stainless Steel
Matt Black
END CAPCAT. NO. FINISH
HRS5010ECBSHRS5010ECPSHRS5010ECMBL
Brushed Stainless SteelPolished Stainless Steel
Matt Black
WALL CONNECTORCAT. NO. FINISH
HRS5010WCBSHRS5010WCPSHRS5010WCMBL
Brushed Stainless SteelPolished Stainless Steel
Matt Black
90 DEGREE CONNECTORCAT. NO. FINISH
HRS5010HBSHRS5010HPSHRS5010HMBL
Brushed Stainless SteelPolished Stainless Steel
Matt Black
90 DEGREE CONNECTORCAT. NO. FINISH
HRS5010VAJBSHRS5010VAJPSHRS5010VAJMBL
Brushed Stainless SteelPolished Stainless Steel
Matt Black
Horizontal Adjustable Connector
• Made of 316 stainless steel
• Adjustable from 90° to 180° Horizontally
• Available in Brushed Stainless, Polished
Stainless and Matt Black
• 32629 Metal contact cement and 7649
Primer can be used for a secure and
permanent bond
Glass Mount Bracket
• Made of 316 stainless steel
• Available in Brushed Stainless, Polished
Stainless and Matt Black
• Suited for the 50mm x 10mm Hand Rail
• Grub screw installation to the Hand Rail
Wall Mount Bracket
• Made of 316 stainless steel
• Available in Brushed Stainless, Polished
Stainless and Matt Black
• Suited for the 50mm x 10mm Hand Rail
• Grub screw installation to the Hand Rail
50 X 10MM RECTANGULAR HANDRAIL
email: [email protected] | crlaurence.com.au 11
GLASS MOUNT BRACKETCAT. NO. FINISH
HRS5010GBBSHRS5010GBPSHRS5010GBMBL
Brushed Stainless SteelPolished Stainless Steel
Matt Black
WALL MOUNT BRACKETCAT. NO. FINISH
HRS5010WBBSHRS5010WBPSHRS5010WBMBL
Brushed Stainless SteelPolished Stainless Steel
Matt Black
HORIZONTAL ADJUSTABLE CONNECTORCAT. NO. FINISH
HRS5010HAJBSHRS5010HAJPSHRS5010HAJMBL
Brushed Stainless SteelPolished Stainless Steel
Matt Black
CRL 42MM CAP RAIL
CAP RAILCAT. NO. FINISH
GR42BSGR42PS
Brushed Stainless Steel Polished Stainless Steel
INLINE CONNECTORCAT. NO. FINISH
GR42CBSGR42CPS
Brushed Stainless Steel Polished Stainless Steel
VERTICAL ADJUSTABLE CONNECTORCAT. NO. FINISH
GR42VADJBSGR42VADJPS
Brushed Stainless Steel Polished Stainless Steel
END CAPCAT. NO. FINISH
GR42ECBSGR42ECPS
Brushed Stainless Steel Polished Stainless Steel
90 DEGREE VERTICAL CONNECTORCAT. NO. FINISH
GR42VCBSGR42VCPS
Brushed Stainless Steel Polished Stainless Steel
42mm Cap Rail
• Made of 316 stainless steel
• 42mm diameter profile
• 24mm x 24mm Glazing pocket
• 6000mm long
• Available in Brushed and Polished Stainless
Steel
• 1.6mm Wall Thickness
Inline Connector
Vertical Adjustable Connector
• Made of 316 stainless steel
• Available in Brushed and Polished Stainless
Steel
• Suited for 42mm diameter cap rail
• 32629 Metal contact cement and 7649
Primer can be used for a secure and
permanent bond
• Made of 316 stainless steel
• Available in Brushed and Polished Stainless
Steel
• Suited for 42mm diameter cap rail
• 32629 Metal contact cement and 7649
Primer can be used for a secure and
permanent bond
End Cap
90 Degree Vertical Connector
• Made of 316 stainless steel
• Available in Brushed and Polished Stainless
Steel
• Suited for 42mm diameter cap rail
• 32629 Metal contact cement and 7649
Primer can be used for a secure and
permanent bond
• Made of 316 stainless steel
• Available in Brushed and Polished Stainless
Steel
• Suited for 42mm diameter cap rail
• 32629 Metal contact cement and 7649
Primer can be used for a secure and
permanent bond
WALL CONNECTORCAT. NO. FINISH
GR42WCBSGR42WCPS
Brushed Stainless Steel Polished Stainless Steel
Wall Connector
• Made of 316 stainless steel
• Available in Brushed and Polished Stainless
Steel
• Suited for 42mm diameter cap rail
• 32629 Metal contact cement and 7649
Primer can be used for a secure and
permanent bond
C.R. LAURENCE of AUSTRALIA Pty Ltd.12
90 DEGREE CONNECTORCAT. NO. FINISH
GR42HBSGR42HPS
Brushed Stainless Steel Polished Stainless Steel
HORIZONTAL ADJUSTABLE CONNECTORCAT. NO. FINISH
GR42HADJBSGR42HADJPS
Brushed Stainless Steel Polished Stainless Steel
90 Degree Connector Horizontal Adjustable Connector
• Made of 316 stainless steel
• Available in Brushed and Polished Stainless
Steel
• Suited for 42mm diameter cap rail
• 32629 Metal contact cement and 7649
Primer can be used for a secure and
permanent bond
• Made of 316 stainless steel
• Available in Brushed and Polished Stainless
Steel
• Suited for 42mm diameter cap rail
• 32629 Metal contact cement and 7649
Primer can be used for a secure and
permanent bond
CRL 42MM CAP RAIL
email: [email protected] | crlaurence.com.au 13
25 X 21MM CAP RAILCAT. NO. FINISH
SLS25BSSLS25PSSLS25MBL
Brushed Stainless SteelPolished Stainless Steel
Matt Black
END CAPCAT. NO. FINISH
SLS25ECBSSLS25ECPSSLS25ECMBL
Brushed Stainless SteelPolished Stainless Steel
Matt Black
HORIZONTAL ADJUSTABLE CONNECTORCAT. NO. FINISH
SLS25HAJBSSLS25HAJPSSLS25HAJMBL
Brushed Stainless SteelPolished Stainless Steel
Matt Black
90 DEGREE CONNECTORCAT. NO. FINISH
SLS25HBSSLS25HPSSLS25HMBL
Brushed Stainless SteelPolished Stainless Steel
Matt Black
INLINE CONNECTORCAT. NO. FINISH
SLS25CBSSLS25CPSSLS25CMBL
Brushed Stainless SteelPolished Stainless Steel
Matt Black
CONCEALED FIX WALL CONNECTORCAT. NO. FINISH
SLS25CWCBSSLS25CWCPSSLS25CWCMBL
Brushed Stainless SteelPolished Stainless Steel
Matt Black
25 x 21mm Cap Rail
• Made of 316 stainless steel
• Small profile for unobtrusive appearance
• 14mm x 14mm Glazing pocket
• 5800mm long
• Available in Brushed Stainless, Polished
Stainless and Matt Black
• 1.6mm Wall Thickness
Inline Connector
• Made of 316 stainless steel
• Available in Brushed Stainless, Polished
Stainless and Matt Black
• Suited 25mm x 21mm Cap Rail
• 32629 Metal contact cement and 7649
Primer can be used for a secure and
permanent bond
Concealed Fix Wall Connector
• Made of 316 stainless steel
• Available in Brushed Stainless, Polished
Stainless and Matt Black
• Suited 25mm x 21mm Cap Rail
End Cap
• Made of 316 stainless steel
• Available in Brushed Stainless, Polished
Stainless and Matt Black
• Suited 25mm x 21mm Cap Rail
• 32629 Metal contact cement and 7649
Primer can be used for a secure and
permanent bond
Horizontal Adjustable Connector
• Made of 316 stainless steel
• Available in Brushed Stainless, Polished
Stainless and Matt Black
• Suited 25mm x 21mm Cap Rail
• 32629 Metal contact cement and 7649
Primer can be used for a secure and
permanent bond
90 Degree Connector
• Made of 316 stainless steel
• Available in Brushed Stainless, Polished
Stainless and Matt Black
• Suited 25mm x 21mm Cap Rail
• 32629 Metal contact cement and 7649
Primer can be used for a secure and
permanent bond
25 X 21MM SQUARE CAP RAIL
14 C.R. LAURENCE of AUSTRALIA Pty Ltd.14
VERTICAL ADJUSTABLE CONNECTOR CAT. NO. FINISH
SLS25VAJBSSLS25VAJPSSLS25VAJMBL
Brushed Stainless SteelPolished Stainless Steel
Matt Black
WALL MOUNT END CAPCAT. NO. FINISH
SLS25WCBSSLS25WCPSSLS25WCMBL
Brushed Stainless SteelPolished Stainless Steel
Matt Black
METAL CONTACT CEMENT & PRIMER
CAT. NO.
326297649
CRL Loctite® Metal Contact CementCRL Loctite® 60 Second Primer
Vertical Adjustable Connector
• Made of 316 stainless steel
• Available in Brushed Stainless, Polished
Stainless and Matt Black
• Suited 25mm x 21mm Cap Rail
• 32629 Metal contact cement and 7649
Primer can be used for a secure and
permanent bond
Wall Mount End Cap CRL Loctite® Metal Contact Cement & 60 Second Primer
• Made of 316 stainless steel
• Available in Brushed Stainless, Polished
Stainless and Matt Black
• Suited 25mm x 21mm Cap Rail
• 32629 Metal contact cement and 7649
Primer can be used for a secure and
permanent bond
• The Strength of an Epoxy and the Speed of
an Instant Adhesive
• Permanently Bonds Cap Rails, Hand Rails,
and Their Accessories with Superior
Strength Holding Power Up to 4,900 psi
• Offers Handling Strength as Quickly as 60
Seconds, Full Cure in 24 Hours
• Use Primer for 60 Second
Activation
25 X 21MM SQUARE CAP RAIL
email: [email protected] | crlaurence.com.au 15
Call FREE on 1800 424 275Fax FREE on 1800 813 013
Melbourne42 Enterprise DriveRowvilleVic 3178Tel. +61 3 9764 8322Fax. +61 3 9764 8378www.crlaurence.com.au
Sydney9 Shale PlaceEastern CreekNSW 2766Tel. +61 2 9851 3444Fax. +61 2 9851 3445www.crlaurence.com.au