CRL COLUMN COVERS (CLADDING) - C.R. Laurence
1
LOG ON TO crlaurence.com FOR BUSINESS-TO-BUSINESS SERVICES PHONE (800) 421-6144 | FAX (800) 262-3299 TOLL FREE FROM ANYWHERE IN THE U.S.A. OR CANADA | M111 CRL COLUMN COVERS (CLADDING) For Pricing on CRL Products, Call Toll Free (800) 421-6144, or Visit crlaurence.com 1. Column Clip Installation First, locate the center of the Column to be covered. Then install Attaching Clips as required, confirming that the column is plumb prior to fastening. If the column is not plumb, use Shims or Setting Blocks to plumb behind the Attaching Clips (see pages M287-M289). 2. Plumb Column Cover Dry fit the first half of the Column Cover to make sure that it is level and plumb. Confirm top and bottom gap required per specifications, then secure Column Cover to Attaching Clips using Self-Drilling Screws (see page M291). 3. Column Cover Joint Spacing Now locate and dry fit the second half of the Column Cover and confirm the joint spacing per specifications. Use spacers to keep the joint spacing consistent prior to anchoring. Now secure the second half of the Column Cover to the Attaching Clips using Self-Drilling Screws (see page M291). 4. Caulk Joints After the Column Covers have been mechanically fastened to the Attaching Clips, silicone all the exposed joints. First use Backer Rod in the joints (see page M286), prior to using Cat. No. 95C Silicone (see page M284). Note: To achieve an "hour glass" type caulking bead, we recommend tooling the silicone with CRL Joint Tooling Spatulas (see page M285). Basic Installation Instructions
Transcript of CRL COLUMN COVERS (CLADDING) - C.R. Laurence
L O G O N T O c r l a u r e n c e . c o m F O R B U S I N E S S - T O - B U S I N E S S S E R V I C E S
PHONE (800) 421-6144 | FAX (800) 262-3299 TOLL FREE FROM ANYWHERE IN THE U.S.A. OR CANADA | M111
CRL COLUMN COVERS (CLADDING) For Pricing on CRL Products, Call Toll Free(800) 421-6144, or Visit crlaurence.com
1. Column Clip InstallationFirst, locate the center of the Column to be covered. Then install
Attaching Clips as required, confirming that the column is plumb priorto fastening. If the column is not plumb, use Shims or Setting Blocksto plumb behind the Attaching Clips (see pages M287-M289).
2. Plumb Column CoverDry fit the first half of the Column Cover to make sure that it is level
and plumb. Confirm top and bottom gap required per specifications,then secure Column Cover to Attaching Clips using Self-DrillingScrews (see page M291).
3. Column Cover Joint SpacingNow locate and dry fit the second half of the Column Cover and
confirm the joint spacing per specifications. Use spacers to keep thejoint spacing consistent prior to anchoring. Now secure the secondhalf of the Column Cover to the Attaching Clips using Self-DrillingScrews (see page M291).
4. Caulk JointsAfter the Column Covers have been mechanically fastened to
the Attaching Clips, silicone all the exposed joints. First use BackerRod in the joints (see page M286), prior to using Cat. No. 95CSilicone (see page M284). Note: To achieve an "hour glass" typecaulking bead, we recommend tooling the silicone with CRL JointTooling Spatulas (see page M285).
Basic Installation Instructions
