Crack Sealing Joint Sealing & other Repair Materials...AC No: 150/5380-6B …..Chapter 3 –...
Transcript of Crack Sealing Joint Sealing & other Repair Materials...AC No: 150/5380-6B …..Chapter 3 –...
-
Crack Sealing Joint Sealing & other Repair Materials
PRESENTED BY Wally Smith Crafco Inc.
Atlanta, GA October, 2013
ACPA/FAA Concrete Airport Pavement
Workshop
-
SUSTAINABILITY BEGINS WITH
PRESERVATION
Right Choice, Right Now
Maintenance of Airport Pavements AC 150/5380-6B
Guidelines & Procedures for
-
Courtesy of ISSA
• Applying the Right Treatment
• On the Right Pavement
• At the Right Time
-
Reality…pavements at all levels and funding is flat or declining $$$$$$
Pave
men
t Con
ditio
n
Years / Traffic / Environment
Reconstruction
Rehabilitation
Preventive
-
Right Choice – Right Now Leadership - Attitude - Dedication
Pave
men
t Con
ditio
n
Years / Traffic / Environment
My Purpose *Challenge you to Up-Your-Game *Review best practices *Share study results *Hot & Cold applied patching materials
-
Today’s Choices Impact the future condition of our pavements.
Pave
men
t Con
ditio
n
Useful Life
Reconstruction
Rehabilitation
Preventive • Joint / Crack Seal • Partial Depth Spalls • Corner Breaks • Utility Spalls
• Lighting • Drains
• Panel Replacement • Full & Partial
• Under Capacity
-
Today’s Choices Impact the future condition of our pavements.
•Pa
vem
ent C
ondi
tion
Useful Life
Reconstruction
Rehabilitation
Preventive
value
-
21 year Field Performance Joint Resealing Project, Fairchild AFB
PCC Pavement
Conclusions.... Field Performance Two sealants were still performing after 21 years • Silicone sealant • Improved Non-JFR low modulus asphalt sealant
• Failure mode for hot-applied asphalt sealants
was adhesion loss • Failure for silicone was adhesion loss and
spalling (6 x more than spalling of hot-applied).
-
21 year Field Performance Joint Resealing Project, Fairchild AFB
PCC Pavement Conclusions….Install Configuration on hot-applied The hot-applied asphalt sealants had >50% life increase when installed flush Flush fill had a greater effect on sealant life than did sealant properties Hot-applied asphalt sealant life is influenced both by sealant properties and install configuration
-
• When we should apply treatments.
• Which distresses we should NOT treat.
• Methods & Materials. • How long it will last?
Solutions and Decisions we implement now Impact the future condition of our pavements.
Preserving our Pavements is Serious Business
-
Sealing prevents Water from Entering the Subgrade: -Prevents sub-base erosion -Voids beneath the slab -Faulting
Do not ignore Moisture
-
Sealing prevents incompressible from lodging in joints and cracks
-Joint Spalling -Blowups -Heaving
Do not ignore Incompressibles
-
Joint sealing in PCC Which SEALANT do I choose?
Hot Pour
Silicone
-
•Item P-605 Joint Sealing Filler •MATERIALS •605-2.1 JOINT SEALERS. •Joint sealing materials shall meet the requirements of •********************************************************************** •The Engineer shall specify one or more of the following: •FED SPEC SS-S-200E(2) - Sealants, Joint, Two-Component, Jet-Blast Resistant, Cold Applied. •ASTM D 1854 - Jet-Fuel-Resistant Concrete Joint Sealer, Hot-Applied Elastic Type •ASTM D 3406 - Joint Sealants, Hot-Applied, Elastomeric- Type, for Portland Cement Concrete Pavements •ASTM D 3569 - Joint Sealants, Hot-Applied, Elastomeric, Jet-Fuel-Resistant type, for Portland Cement Concrete Pavements •ASTM D 3581 - Joint Sealant, Hot-Applied, Jet-Fuel-Resistant Type, for Portland Cement Concrete and Tar-Concrete Pavements •ASTM D 5893 - Standard Specifications for Cold Applied, Single Component, Chemically Curing Silicone Joint Sealant for Portland Cement Concrete Pavements.
•ASTM D 6690 - Joint and Crack Sealants, Hot-Applied, for Concrete and Asphalt Pavements
-
Material Type How do we decide?
Crack Sealing Sealant Specifications
Crack Filling Sealant Specifications ASTM 5078
ASTM 6690 TYPE I, II, III and IV
Crack sealants and crack fillers need to remain functional over the range of anticipated pavement temperatures.
-
Selecting Sealant
-
Selecting Sealant
-
Type I—A joint and crack sealant capable of maintaining an effective seal in moderate climates. The material is tested for low temperature performance at –18°C using 50 % extension (formerly Specification D 1190).
Type II—A joint and crack sealant capable of maintaining an effective seal in most climates. Material is tested for low temperature performance at –29°C using 50 % extension (formerly Specification D 3405). Type III—A joint and crack sealant capable of maintaining
an effective seal in most climates. Material is tested for low temperature performance at –29°C using 50 % extension. Special tests are included (formerly Federal Spec SS-S- 1401C).
Type IV—A joint and crack sealant capable of maintaining an effective seal in climates experiencing very cold temperatures. Material is tested for low temperature performance at –29°C using 200 % extension.
-
BACKER ROD
• 25% Larger than Joint • Cold Rod/Hot Rod • Closed Cell Backer Rod
Cold Rod
Hot Rod
-
CLEAN AND DRY!
REMEMBER!!!!!!!
-
Who’s Checking?
-
How long will it last? Crack Sealing
Rubberized (polymer-modified) asphalt sealants
5-9 years performance in routed working cracks
Rubberized (polymer-modified) asphalt sealants
2.5-5 years performance in un-routed working cracks
(FHWA-RD-99-147)
-
DEEP
REFLECTIVE EDGE
TRANSITION
LONGITUDINAL
TRANVERSE BLOCK
REQUIRE DIFFERENT STRATEGIES AC No: 150/5380-6B …..Chapter 3 – Pavement Distress
Cracks Happen… In a lot of ways
-
Too Wide for Sealant
-
Hot applied polymeric binder and aggregate blends Pourable, self adhesive, voidless, flexible, load resistant Properties result in improved performance and unique uses
Hot Mastic Repair Material
-
Flowable and Voidless
Black
Gray
-
Stone filled Mastic Repair Materials
Cherry Point Marine Air Station
-
The image cannot be displayed. Your computer may not have enough memory to open the image, or the image may have been corrupted. Restart your computer, and then open the file again. If the red x still appears, you may have to delete the image and then insert it again.
-
Slab Replacement – Big $
Much less expensive Choice - Mastic Repair
-
Knoxville AP
-
Knoxville AP
-
Knoxville AP
-
Baltimore - Washington
Isolation Joint
-
Mesa – Gateway AP
-
Today’s Choices Impact the future condition of our pavements.
•Pa
vem
ent C
ondi
tion
Useful Life
Reconstruction
Rehabilitation
Preventive
value
-
www.Crafco.com [email protected]
Neglect leads to accelerated damage and HAZARDS
Crack Sealing �Joint Sealing & otherRepair MaterialsSUSTAINABILITY �BEGINS WITH�PRESERVATIONSlide Number 3Reality…pavements at all levels�and funding is flat or declining $$$$$$Right Choice – Right Now�Leadership - Attitude - DedicationToday’s Choices Impact the future condition of our pavements.Today’s Choices Impact the future condition of our pavements.Slide Number 821 year Field Performance�Joint Resealing Project, Fairchild AFB�PCC Pavement21 year Field Performance�Joint Resealing Project, Fairchild AFB�PCC PavementSlide Number 11Slide Number 12Slide Number 13Joint sealing in PCCSlide Number 15Material Type�How do we decide?Slide Number 17Selecting SealantSelecting SealantSlide Number 20BACKER RODSlide Number 22Who’s Checking?How long will it last?Slide Number 25Slide Number 26Slide Number 27Slide Number 28Slide Number 29Flowable and VoidlessSlide Number 31Slide Number 32Slide Number 33Slide Number 34Slide Number 35Knoxville APKnoxville APKnoxville APSlide Number 39Slide Number 40Baltimore - WashingtonMesa – Gateway APToday’s Choices Impact the future condition of our pavements.Slide Number 44