CP.164 4,3’’ DIGITAL HMI WITH KEYBOARD - ALMEC

TECHNICAL FEATURES

CODE CP.164

POWER SUPPLY 9 ÷ 36 VDC / 150 mA CURRENT ABSORPTION AT 24 VDC (STAND BY MODE )

SWITCH / BUTTONTOTAL

32

EMERGENCY STOP PUSHBUTTONGENERAL KEY SWITCH N. 30 ON/OFF PUSHBUTTONS (WITH INTEGRATED BACKLIGHT AND SPOTLIGHT)

LEDTOTAL

33

N. 30 PROGRAMMABLE SPOTLIGHT LEDS (PUSHBUTTON INTEGRATED)N. 3 STATUS LED (RED COLOR)PROGRAMMABLE BACKLIGHT

CAN BUS 1 PORT 2.0 A/B COMPLIANT - (11, 29 BIT) - ISO 11898 - UP TO 1MBIT/S

CAN BUS PROTOCOLS

PUSHBUTTONS/LEDS: CAN OPEN (CIA DS401 DEVICE PROFILE FOR GENERIC I/O MODULE, WITH DS306 EDS FILE)DISPLAY: FULLY CUSTOMIZABLE, IT DEPENDS ON SOFTWARE IMPLEMENTATIONON REQUEST: SAE J1939 - ISO 11783 (ISO BUS) – FMS

WORKING TEMPERATURE -20°C +70°C

DISPLAY

LCD TYPE: TFT TRANSMITTIVE

DOT MATRIX: 480 (RGB) X 272

VISUAL AREA: 95.04 (W) X 53.856 (H) mm

LUMINANCE: 450 cd/m2

BUZZER 1 PROGRAMMABLE

WEIGHT 1,1 Kg

0619

4,3’’ DIGITAL HMI WITH KEYBOARDCP.164

ALMEC S.p.A. - Via Torino 196 - 12063 - Dogliani (Cn)

P.IVA/C.F./Reg.Imp.: 02834380046 - Cap. Soc. € 323.400 - Tel. +39 0173 742821 - www.almec.net - [email protected]

The CP.164 is a control panel with akeyboard on the front with backlight,designed to maximize the operation ofthe systems.The graphic label is customizable.The adjustable LCD backlight allow anoptimal reading of texts and functionsof the machine.

Using the ALMEClab developmentplatform, the operating logic and thegraphics are easily programmable.

It can be implemented in a serial line(RS232) or in a CAN network, asMASTER or SLAVE.

20190626 - Pag. 1/3

0619



20190626 - Pag. 2/3


ELECTRONIC FEATURES

SLAVE USAGE EDS FILE

MASTER USAGE ALMEClab

STANDARD C PROGRAM LANGUAGE

PROGRAMMING FIRMWARE UPLOAD BY CAN BUS WITH ALOADER SOFTWARE TOOL

CYCLE TIME 50 ms

STANDARDS

ELECTROMAGNETIC EMISSIONS EN 61000-6-4 // EN 55011 (RF RADIATE)

ELECTROMAGNETIC IMMUNITY EN 61000-6-2 // EN 61000-4-2/3/4/6

IN ACCORDANCE WITH THE EN50498 THE DEVICE MEETS THE TECHNICAL SPECIFIC REQUIREMENTS OF 2004-104 DIRECTIVE (AUTOMOTIVE). THE DEVICE IS EMC 2004/108 COMPLIANT.

M12 8PIN MALE A-CODED CONNECTOR

PINOUT

1 POSITIVE POWER SUPPLY

2EXTERNAL POWER SUPPLY (WORKING WHEN THE KEYSWITCH IS IN “ON” POSITION)

3 CAN H

4 NONE

5 NEGATIVE POWER SUPPLY

6 EMERGENCY DRY CONTACT

7 CAN L

8 EMERGENCY DRY CONTACT

SIZE (mm)

6

21

3

45

7

8

0619



20190626 - Pag. 3/3


FEATURES

DEVICE CONFIGURATIONA. LCD DISPLAYB. KEYBOARD C. EMERGENCY STOP BUTTOND. ON/OFF KEYSWITCHE. STATUS LEDS (NR. 3)F. SWIVEL ADJUSTABLE MOUNT BRACKET

for flat bases, fixed positions in 10° detent stages.

WITH CAPACITIVE TOUCHSCREEN

ON REQUEST:DIN RAIL HOLDER for rails DIN EN 60715 TH 35

CUSTOMIZABLEGRAPHIC KEYBOARDon pictures, colors and text

CUSTOMIZABLE GRAPHIC DISPLAY and WORKING LOGICUsing ALMEClabdevelopment platform

A

B

C DE

F

0619

NOTE



CP.164 4,3’’ DIGITAL HMI WITH KEYBOARD - ALMEC

Documents

Transcript of CP.164 4,3’’ DIGITAL HMI WITH KEYBOARD - ALMEC