Cover Page The cover page ToC will open the needed forms for your releases. Red fields are mandatory...
-
Upload
efrain-thomason -
Category
Documents
-
view
212 -
download
0
Transcript of Cover Page The cover page ToC will open the needed forms for your releases. Red fields are mandatory...
Cover PageThe cover page ToC will open
the needed forms for your releases.
Red fields are mandatory and also auto fill other areas through out the forms.
Design Release’s
Design releases are for full jobs not for S/W/R jobs. Please use
the appropriate form.
The final Release Package is a checklist meant to verify that
you have provided all the information needed to
complete the job.
What departments need to be notified?
Blanket Documentation
needed
Blanket Test needed
Load rating has been changed
so you now have to pick from the drop down, this
should help reduce the number of
errors when a GM job is
released with the wrong
capacity and weight.
Individual test & Documentation
Quality Release
This section on a rework or warranty doesn’t always have to be filled out even if it is ford, the other section can be used to call out the specific
test or cert needed to be done.
Test needed
Test documentation not always needed
on R/S/W
Quality Release
Service class:0 = 0-20,000
1 = 20,001-100,0002 = 100,001-500,000
3 = 500,001-2,000,0004 over 2,000,000
Design Category two choices:
A = slow or low-cycle operations
B = high cycle counts
Tag information goes here this is what the customer see’s at the plant wrong or missing information here makes us look bad.
Quality Release
Design Category two choices:
A = slow or low-cycle operations A
can only = 0B = high cycle
counts. B can now only have values
of 1-4
Color is now the default field with
a mandatory entry unless N/A
is selected.
All details or parts needed to complete the task needs to be here, from detail #’s
to taps and bolts.
The description is needed to let the
builder know what is expected.
Re-work, Spare parts
or Warranty
Job’s should
have the prefix of
S/R/W on the cover
page so all documents
will have the same
tool number showing
Spare Part/Re-Work/ Warranty Release
Here we explain why we are doing this, was it a customer
change or our fault, this helps us to track
the why’s.
SIMO
Simo builds must have this
form to accompany the release with the
basic information
filled out.
SIMO builds need at least a hand sketch and a sequence of operation.
Forget Something?This is the error msg. you always ignore that’s letting you
know you should not proceed with saving or printing.
Hit list• Pdf’s being over written, need to
save as. Information is being lost or incorrect. i.e.: wrong ship dates, balancer missing from release…
• Station layouts needed even if it’s a hand sketch.
• Have P.O. request in same format as strippits/waterjet.
• Round weights up.