STUDENTS COMPETENCE COMPETITION

YEAR 2012FIELD OF COMPETITION

AUTOCAD BUILDING

THEORY AND PRACTICAL WORK

GOVERNMENT OF NORTH JAKARTA

SECONDARY AND HIGH EDUCATION SERVICE2012COMPUTER AIDED DRAWING & DESIGN1. Name and Description 1.1 Building Engginering Drawing and Design

1.2 Building Engginering Drawing and Design covers the use of computer Aided Drawing & Design (CADD) technology in the preparation of graphical models,drawing,paper work and files containing all information necessary for the building constructions and documentation,of plan,section and detail of part & component typical of solution to building engineering problem.2. Scope of Work at Province Student Skills Competition2.1 The test consist only practical work

2.2 The theoretical is limited to that necessary to carry out the practical work and reflect that of an entry Building Engineering Drawing and Design.3. Practical Work

3.1 Practical tasks will be given a typical plan of low cost housing T-36

Collection of information to these subject will be required,such as:specification of material,engineering table and manual.Problem will be required solution in the form of graphical and textual description,sufficient to communicate successfully the information necessary for construction in the field.

3.2 Competition Project Categories3.2.1 Redrawing the given plan and completing the nesscary information,production Front View and Side View Drawing base on given plan and completed by needed information.3.2.2 Section drawing

Preparing cross section and longitudinal section drawing,completed with general dimension and elevation dimension.

3.2.3 Detail of truss ( Kuda-kuda).Preparing detail of part drawing for manufacturing containing all necessary information for logical manufacturing processes such as:

Accessories needed to the truss

Complete shape description of the component

General dimensions

3.3 Output of work

3.3.1 The drawing after finished put on a form

3.3.2 The drawing printed by laser jet (B/W)

3.3.3 The drawing printed to A4 paper size with suitable scale,completed with dimension,text,line thickness professional and rendering.

3.4 Appropriate Related Skills

3.4.1 Preparation of drawing sheets including borders,line thickness,title block and relevant information

3.4.2 Reading and use of technical manual,table or standart manuals, software and hardware reference manual as well as catalog products.

3.4.3 Working knowledge of computer operating system sufficient to manipulate and manage computer files and software correctly.

3.4.4 Good command of technical drawing and architectural design as well as that practical application of drawing and architectural design as well as practical application of drawing principles and practices.

3.4.5 Can be printed work of drawing,using laser printers or inkjet printers,after instruction during the familiarization period.

4. Materials

4.1 The host official for practical reason shall be responsible for provision of the major product and support personnel for such items as computers,monitors,mouse,printers and furniture.4.2 Additional materials to be supplied included :

4.2.1 Sketching paper

4.2.2 Sketching pencils and eraser

4.2.3 Top quality paper for printing

4.3 The equipment have to prepared by participants4.3.1 Material specification needed

4.3.2 Pocket calculator

5. Test Marking

Marking aspect of part score between 1 to 10 points

6. Time Of Test

6.1Redraw plan

= 1,5 hours,weight measurement = 15

6.2Front view

= 1,5 hours weight measurement = 15

6.3Side view

= 1 hours weight measurement = 10

6.4Cross section Drawing

= 2 hours weight measurement = 20

6.5Longitudinal Section drawing = 2 hours weight measurement = 20

6.6Detail drawing

= 2 hours weight measurement = 20

Total

= 100

7. Place & Date Competition

Electronic Division SMK Negeri 56 Jakarta on December 14 and 15,2009

8. Appendix

Drawing test