Course Number 2333 IPS Introduction OM&MLevel 1 Service Technician Qualification Dealer Presented...
31
Course Number 2333 IPS Introduction OM&M Level 1 Service Technician Qualification Dealer Presented Training FBC15N, FBC18N, FBC18LN, FBC20N, FBC25N, FBC25EN, FBC25LN, FBC30N, FBC30LN
-
Upload
cooper-greenaway -
Category
Documents
-
view
221 -
download
5
Transcript of Course Number 2333 IPS Introduction OM&MLevel 1 Service Technician Qualification Dealer Presented...
Course Number2333IPS Introduction OM&M Level 1Service Technician Qualification
Dealer Presented Training
FBC15N, FBC18N, FBC18LN, FBC20N, FBC25N, FBC25EN, FBC25LN, FBC30N, FBC30LN
Learning Objectives:
At the completion of this lesson, the student will be able to:
• Explain the IPS (Integrated Presence System)• Explain what information is available in the O&M
Manual• Explain the Operation of the Display• Locate and explain System Maintenance
Intervals
2
All registered trademarks herein are the property of their respective owners.The information set forth herein is confidential and is not for distribution beyond MCFA and its authorized Mitsubishi Forklift Trucks and Cat® Lift Trucks dealer network.Copyright © 2003 by MCFA. All rights reserved. Reproduction of this material in any form is prohibited without written permission of MCFA.
Introduction
Introduction
3
Models Serial Number
FBC15N A4BC1-10200 ~
FBC18N A4BC1-20200 ~
FBC18LN A4BC1-30200 ~
FBC20N A4BC2-10200 ~
FBC25N A4BC2-20200 ~
FBC25EN A4BC3-20200 ~
FBC25LN A4BC3-30200 ~
FBC30N A4BC3-40200 ~
FBC30LN A4BC4-10200 ~
4
Serial Number and Name Plate Location
Introduction
Page 21 in OM&M
The truck serial number is stamped into thefront frame plate.
Introduction
Page 25 in OM&M
Introduction
Page 26 in OM&MDisplay
Introduction
Page 27 in OM&MDisplay Icon’s
Introduction
Page 28 in OM&MError Codes
Introduction
Page 29 in OM&MDisplay Operation Modes
Introduction
Page 30 in OM&MOperator Restraint System
Introduction
Page 34 in OM&M
Introduction
Page 35 in OM&M
Introduction
Page 36 in OM&M
Introduction
Page 37 in OM&M
15
Introduction
Page 38 in OM&M
Introduction
Page 39 in OM&MControl Fuses
Introduction
Page 41 in OM&M
Introduction
Page 43 in OM&M
Page 44 in OM&M
Introduction
Page 45 in OM&M
Introduction
Page 53 in OM&M
Introduction
Page 55 in OM&M
Introduction
Page 57 in OM&M
Introduction
Introduction
Page 58 in OM&M
Introduction
Page 77 in OM&M
Introduction
Page 78 in OM&M
Introduction
Page 79 in OM&M
Introduction
Page 90 in OM&M
Introduction
Page 91 in OM&M
Introduction
Page 92 in OM&M
Any Questions?
Go to the lab and complete Skill Evaluation “A” under “Tab 11”
in the Student Workbook.
Introduction
