Looking to become a CFSE or CFSP? This is the course you’ll need to pass the exam!

Also known as FSE 100, this course provides an overview of process industry safety engineering from the point of view of the Risk Analyst, Process Safety Coordinator, and Control Systems Design Engineer.It delivers a complete overview of the functional safety lifecycle. The course reviews Process Hazard Analysis (PHA), Consequence Analysis, Layer of Protection Analysis (LOPA), Safety Integrity Level (SIL) Target Selection, Safety Requirements Specification (SRS) generation, failure rates, device and system reliability, SIF verification, SIF detailed design and Operations requirements.

This course forms a broad review in preparation for the Certified Functional Safety Expert (CFSE) and Certified Functional Safety Professional (CFSP) process industry application engineering exams.

Course Topics

FSE 101 (Days 1 & 2)

• Introduction to Safety Instrumented Systems

• Principles of Risk Management

• The Safety Lifecycle

• Process Hazard Analysis (PHA)

• Consequence Analysis

• Likelihood Analysis

• Layer of Protection Analysis (LOPA)

• Tolerable Risk

• SIL Target Selection

• Safety Requirements Specification (SRS)

FSE 102 (Days 1 & 2)

• Safety Instrumented Systems (SIS) failure

• From failure rate to SIL

• Single devices to system

• Redundant Architectures

• Requirements to SIF

• SIF Design and Verification in the Safety Lifecycle

• SIF Detail Design

• Operations

FSE 100 - IEC 61511: Functional Safety Analysis, Design, and Operation

COURSE DESCRIPTION

Who Should Attend:• Process Safety Engineer

• Control Engineer

• Reliability Engineer

• Engineering/Operations Management

• Plant Risk Analysts

• Loss Prevention Professionals

• CFSE and CFSP Process Application candidates

Course Length: 4 days

Cost: $2995 (does not include exam fees)

About exida Academyexida Academy provides comprehensive Functional Safety, ICS Cybersecurity, and Alarm Management training for end user industry professionals, as well original equipment manufacturers.

Our courses are available on a variety of platforms, from single day public courses to week long custom, onsite training workshops. Off ering courses at the Beginner, Practitioner, and Expert levels, our goal is to share our evolving knowledge and skills with our students with the intention that they will use this knowledge to cost eff ectively design, build, operate, and maintain optimally safe and secure automation systems as applicable to their functional responsibility.

exida Academy was built from the core foundation of exida’s vision for excellence in dependable automation.

For More Information Go to: http://www.exida.com/Training