6 inches5-7/8 inches5-3/4 inches5-5/8 inches5-1/2 inches5-3/8 inches5-1/4 inches5-1/8 inches

5 inches4-7/8 inches4-3/4 inches4-5/8 inches4-1/2 inches4-3/8 inches4-1/4 inches4-1/8 inches

4 inches3-7/8 inches3-3/4 inches3-5/8 inches3-1/2 inches3-3/8 inches3-1/4 inches3-1/8 inches

3 inches2-7/8 inches2-3/4 inches2-5/8 inches2-1/2 inches2-3/8 inches2-1/4 inches2-1/8 inches

2 inches1-7/8 inches1-3/4 inches1-5/8 inches1-1/2 inches1-3/8 inches1-1/4 inches1-1/8 inches

1 inches7/8 inches3/4 inches5/8 inches1/2 inches3/8 inches1/4 inches1/8 inches

6 inches5-7/8 inches5-3/4 inches5-5/8 inches5-1/2 inches5-3/8 inches5-1/4 inches5-1/8 inches

5 inches4-7/8 inches4-3/4 inches4-5/8 inches4-1/2 inches4-3/8 inches4-1/4 inches4-1/8 inches

4 inches3-7/8 inches3-3/4 inches3-5/8 inches3-1/2 inches3-3/8 inches3-1/4 inches3-1/8 inches

3 inches2-7/8 inches2-3/4 inches2-5/8 inches2-1/2 inches2-3/8 inches2-1/4 inches2-1/8 inches

2 inches1-7/8 inches1-3/4 inches1-5/8 inches1-1/2 inches1-3/8 inches1-1/4 inches1-1/8 inches

1 inches7/8 inches3/4 inches5/8 inches1/2 inches3/8 inches1/4 inches1/8 inches

5-7/8 inches

5-5/8 inches

5-3/8 inches

5-1/8 inches

4-7/8 inches

4-5/8 inches

4-3/8 inches

4-1/8 inches

3-7/8 inches

3-5/8 inches

3-3/8 inches

3-1/8 inches

2-7/8 inches

2-5/8 inches

2-3/8 inches

2-1/8 inches

1-7/8 inches

1-5/8 inches

1-3/8 inches

1-1/8 inches

7/8 inches

5/8 inches

3/8 inches

1/8 inches

6 inches

5-3/4 inches

5-1/2 inches

5-1/4 inches

5 inches

4-3/4 inches

4-1/2 inches

4-1/4 inches

4 inches

3-3/4 inches

3-1/2 inches

3-1/4 inches

3 inches

2-3/4 inches

2-1/2 inches

2-1/4 inches

2 inches

1-3/4 inches

1-1/2 inches

1-1/4 inches

1 inches

3/4 inches

1/2 inches

1/4 inches

1 2 3 4 5 6

Corner Radius GuideSee page 2 for instructions.Need help? Call our experts!1-800-541-0271PioneerTablePads.com

If you know your tablemanufacturer name and stylenumber, you do not need togive us this measurement.We may already haveit on file.

Measure the linebelow to test:

if it is not exactly6 inches long,

the scale is wrong.

Be sure your printer’s “scaling” setting is set

to “100% scale” or“no scaling.”

Copyright © 2016–2018 Pioneer Table Pad Company, All Rights Reserved.

1. Measure the test line at the bottom of page 1 to make sure the scale of the printout is accurate.

2. Cut out the radius you think is closest to your table’s corners.

3. Compare that radius to the flat top surface only. Do not include any lip, bevel, rolled or sloping edges:

4. If the radius is too small or too large, try a different one. (If none of these sizes is

correct, you can make a pattern instead. See instructions on our website.)

5. Give us the correct radius.

Radius Too Small(Hangs over)

Radius Too Large(Doesn’t fully

cover table top)

Correct(Exactly fits

top surface)

Corner Radius Guide InstructionsNeed help? Call our experts!1-800-541-0271PioneerTablePads.com