Copy of OMT for RBS
Transcript of Copy of OMT for RBS
![Page 1: Copy of OMT for RBS](https://reader033.fdocuments.us/reader033/viewer/2022061117/5467e14db4af9f5d3f8b5a1e/html5/thumbnails/1.jpg)
OMT for RBS
![Page 2: Copy of OMT for RBS](https://reader033.fdocuments.us/reader033/viewer/2022061117/5467e14db4af9f5d3f8b5a1e/html5/thumbnails/2.jpg)
OMT Main Window
![Page 3: Copy of OMT for RBS](https://reader033.fdocuments.us/reader033/viewer/2022061117/5467e14db4af9f5d3f8b5a1e/html5/thumbnails/3.jpg)
In the OMT Main window is a View window. All information is displayed in a separate
window. Several windows can be open at any time. In this example only one, containing
information about the IDB, is shown. There is a status bar at the bottom of the Main
window. The Status bar shows the current OMT State
and the selected object or a help text for the highlighted menu option.
![Page 4: Copy of OMT for RBS](https://reader033.fdocuments.us/reader033/viewer/2022061117/5467e14db4af9f5d3f8b5a1e/html5/thumbnails/4.jpg)
There is a toolbar at the top of the Main window. The toolbar shows the most common operations.
These operations can be executed by clicking on an icon on the toolbar or by selecting the operation in the menu.
![Page 5: Copy of OMT for RBS](https://reader033.fdocuments.us/reader033/viewer/2022061117/5467e14db4af9f5d3f8b5a1e/html5/thumbnails/5.jpg)
Different Main Menus
File: The File menu contains IDB-related
commands, for example, Read IDB and Install IDB.
These commands can also be found under the Operation menu when the IDB object is selected.
Under the File menu is also the Exit command which closes the OMT application.
![Page 6: Copy of OMT for RBS](https://reader033.fdocuments.us/reader033/viewer/2022061117/5467e14db4af9f5d3f8b5a1e/html5/thumbnails/6.jpg)
Connection: The Connection menu contains
the commands that handle the connection between the OMT and the RBS.View:
The View menu makes it possible to select different views: System Overview, Cabinet View, Hardware View etc.,
![Page 7: Copy of OMT for RBS](https://reader033.fdocuments.us/reader033/viewer/2022061117/5467e14db4af9f5d3f8b5a1e/html5/thumbnails/7.jpg)
Object: The different objects for the chosen view can
be found under the Object menu. For example, RUs, Alarm Inlets. Operation:
The Operation menu contains the different operations that are available for the chosen object.
Every object has operations that can be executed.
![Page 8: Copy of OMT for RBS](https://reader033.fdocuments.us/reader033/viewer/2022061117/5467e14db4af9f5d3f8b5a1e/html5/thumbnails/8.jpg)
The operations are not the same for all objects so the command options in the Operation menu change depending on the chosen object.
Window: Commands that are used to arrange windows
and icons are found under the Window menu.Help:
The Help menu offers commands that display help pages for both the OMT application and the help tool.
![Page 9: Copy of OMT for RBS](https://reader033.fdocuments.us/reader033/viewer/2022061117/5467e14db4af9f5d3f8b5a1e/html5/thumbnails/9.jpg)
OMT States
The OMT executes in one of five different states which are: Init, Local IDB, Connected (No IDB), Connected (Local IDB) and Connected.
The current OMT State is displayed on the Status bar.
Some operations cannot be performed in all states.
Menu items representing operations not available in the current state are disabled and displayed in light grey text.
![Page 10: Copy of OMT for RBS](https://reader033.fdocuments.us/reader033/viewer/2022061117/5467e14db4af9f5d3f8b5a1e/html5/thumbnails/10.jpg)
Init: The OMT is in the Init state when it is started. In this state, the OMT is not connected to the
RBS and does not operate on any IDB. The only view available in this state is the
System Overview.Local IDB: In this state, the OMT is not connected to the
RBS, but is operating on a local copy of the IDB in the OMT.
![Page 11: Copy of OMT for RBS](https://reader033.fdocuments.us/reader033/viewer/2022061117/5467e14db4af9f5d3f8b5a1e/html5/thumbnails/11.jpg)
Connected (No IDB): Here the OMT is connected to the RBS
but has no access to any IDB copy. The only view available in this state is
the System Overview. The Connected (No IDB) state should be
seen as a transitional state, because this state does not offer any new operations or functions compared to the Local IDB or Connected state.
![Page 12: Copy of OMT for RBS](https://reader033.fdocuments.us/reader033/viewer/2022061117/5467e14db4af9f5d3f8b5a1e/html5/thumbnails/12.jpg)
Connected (Local IDB): Now the OMT is connected to the RBS and
operates on a local IDB copy. The Connected (Local IDB) state should, like
the Connected (No IDB) state, be seen as a transitional state.
Connected: In this state, the OMT is connected to the RBS
and operates on an IDB copied to or from the RBS.
![Page 13: Copy of OMT for RBS](https://reader033.fdocuments.us/reader033/viewer/2022061117/5467e14db4af9f5d3f8b5a1e/html5/thumbnails/13.jpg)
The IDB has been read from the RBS to the OMT.
The OMT can be executed in different states.
Depending on the type of command executed the OMT may move from one state to the other.
For example, if the OMT operates in state Init and the Connect command is executed, the OMT State changes to the Connected (No IDB) state.
![Page 14: Copy of OMT for RBS](https://reader033.fdocuments.us/reader033/viewer/2022061117/5467e14db4af9f5d3f8b5a1e/html5/thumbnails/14.jpg)
View
A view displays the RBS 2000 system graphically.
There are four types of views: System Overview, Cabinet View,
Hardware View and MO View.To select a view:
1. Select View | <a view>.
![Page 15: Copy of OMT for RBS](https://reader033.fdocuments.us/reader033/viewer/2022061117/5467e14db4af9f5d3f8b5a1e/html5/thumbnails/15.jpg)
System Overview
![Page 16: Copy of OMT for RBS](https://reader033.fdocuments.us/reader033/viewer/2022061117/5467e14db4af9f5d3f8b5a1e/html5/thumbnails/16.jpg)
The System Overview window shows the BSC, the PCM link, the Alarm Inlets, the RBS, the OMT and the IDB, that is, an overview of the whole system.
The System Overview is displayed when the program is first started.
![Page 17: Copy of OMT for RBS](https://reader033.fdocuments.us/reader033/viewer/2022061117/5467e14db4af9f5d3f8b5a1e/html5/thumbnails/17.jpg)
Cabinet Overview
![Page 18: Copy of OMT for RBS](https://reader033.fdocuments.us/reader033/viewer/2022061117/5467e14db4af9f5d3f8b5a1e/html5/thumbnails/18.jpg)
The Cabinet View window shows the hardware items in the RBS, that is, the cabinet appearance.
All objects that can be selected when this view is active are not visible in the normal view.
BDM stands for Battery Distribution module. It is similar to IDM.
![Page 19: Copy of OMT for RBS](https://reader033.fdocuments.us/reader033/viewer/2022061117/5467e14db4af9f5d3f8b5a1e/html5/thumbnails/19.jpg)
Hardware View
![Page 20: Copy of OMT for RBS](https://reader033.fdocuments.us/reader033/viewer/2022061117/5467e14db4af9f5d3f8b5a1e/html5/thumbnails/20.jpg)
The Hardware View window shows the RBS’s schematic structure.
There are hidden objects such as Sensors and Cables.
These objects can be selected through the Main menu Object.
![Page 21: Copy of OMT for RBS](https://reader033.fdocuments.us/reader033/viewer/2022061117/5467e14db4af9f5d3f8b5a1e/html5/thumbnails/21.jpg)
MO View
![Page 22: Copy of OMT for RBS](https://reader033.fdocuments.us/reader033/viewer/2022061117/5467e14db4af9f5d3f8b5a1e/html5/thumbnails/22.jpg)
Managed Object (MO) is the name of a generalised object.
An operation defined for an MO is actually defined for the TRX.
The Managed Objects have also internal state that you can manipulate by commands from Base Station Controller (BSC).
These states are Reset, Start, Disable and Enable.
![Page 23: Copy of OMT for RBS](https://reader033.fdocuments.us/reader033/viewer/2022061117/5467e14db4af9f5d3f8b5a1e/html5/thumbnails/23.jpg)
The Managed Objects CF, TF, DP, CON and IS corresponds to the hardware unit DXU in the BTS.
The Managed Objects TRX, TX, RX and TS corresponds to the hardware unit TRU in the BTS.
![Page 24: Copy of OMT for RBS](https://reader033.fdocuments.us/reader033/viewer/2022061117/5467e14db4af9f5d3f8b5a1e/html5/thumbnails/24.jpg)
Using OMTStart the OMT as follows:1. Open the Start menu.2. Select Programs.3. Select the OMT menu.4. Select the installed OMT version from the menu.
The Exit Command The Exit command closes the OMT application. The command performs the following actions
before closing the program: close all open windows and disconnect the OMT from the RBS.
![Page 25: Copy of OMT for RBS](https://reader033.fdocuments.us/reader033/viewer/2022061117/5467e14db4af9f5d3f8b5a1e/html5/thumbnails/25.jpg)
Connect: A connection between the OMT and the
RBS must be established before the OMT can use the IDB in the RBS or monitor information.
The connection is established with the Connect command.
Connect the OMT to the RBS as follows:1. Select Connection | Connect.
![Page 26: Copy of OMT for RBS](https://reader033.fdocuments.us/reader033/viewer/2022061117/5467e14db4af9f5d3f8b5a1e/html5/thumbnails/26.jpg)
There are different operations like Read IDB, Open IDB, Install IDB each of which performs the specified task.
“Read IDB” command transfers an IDB copy from the RBS to the OMT.
Execute the Install IDB command to install the IDB that the OMT is operating on into the RBS.
The IDB in the RBS is replaced by the IDB that the OMT is operating on.
The DXU must be in Local Mode to be able to accept a new IDB.
![Page 27: Copy of OMT for RBS](https://reader033.fdocuments.us/reader033/viewer/2022061117/5467e14db4af9f5d3f8b5a1e/html5/thumbnails/27.jpg)
Read IDB
1. Choose connect from the connection menu.
The line between OMT and RBS 2000 is connected.
![Page 28: Copy of OMT for RBS](https://reader033.fdocuments.us/reader033/viewer/2022061117/5467e14db4af9f5d3f8b5a1e/html5/thumbnails/28.jpg)
2. Choose Read IDB from the file menu.
A progress window displays when it is ready.
![Page 29: Copy of OMT for RBS](https://reader033.fdocuments.us/reader033/viewer/2022061117/5467e14db4af9f5d3f8b5a1e/html5/thumbnails/29.jpg)
Create IDB
Create IDB is a command that creates a new IDB.
Execute this command as follows: 1. Select the IDB from the System
Overview. 2. Select Operation | Create IDB... The Create IDB dialog box appears.
![Page 30: Copy of OMT for RBS](https://reader033.fdocuments.us/reader033/viewer/2022061117/5467e14db4af9f5d3f8b5a1e/html5/thumbnails/30.jpg)
![Page 31: Copy of OMT for RBS](https://reader033.fdocuments.us/reader033/viewer/2022061117/5467e14db4af9f5d3f8b5a1e/html5/thumbnails/31.jpg)
There are three main topics: Transmission Interface, Cabinet Setup and Antenna Sector Setup.Transmission Interface:
There are two Transmission Interfaces to choose from.
Choose G.703 (E1) or DS1 (T1).
![Page 32: Copy of OMT for RBS](https://reader033.fdocuments.us/reader033/viewer/2022061117/5467e14db4af9f5d3f8b5a1e/html5/thumbnails/32.jpg)
Cabinet Setup The Cabinet settings are shown in the Cabinet
setup list box. Create another Cabinet setting by clicking the
“New” button. Change the Cabinet settings by clicking the
“Modify” button. Delete a selected configuration by clicking the
“Delete” button Click on the new or modify button which brings
up the Define Setup for Cabinet dialog box.
![Page 33: Copy of OMT for RBS](https://reader033.fdocuments.us/reader033/viewer/2022061117/5467e14db4af9f5d3f8b5a1e/html5/thumbnails/33.jpg)
![Page 34: Copy of OMT for RBS](https://reader033.fdocuments.us/reader033/viewer/2022061117/5467e14db4af9f5d3f8b5a1e/html5/thumbnails/34.jpg)
Choose Cabinet Type, Power System, Climate System and confirm with OK.
This brings back the Create IDB dialog box.
Selecting Cancel closes the Define Setup for the Cabinet dialog box without making any changes. This also brings back the Create IDB dialog box.
![Page 35: Copy of OMT for RBS](https://reader033.fdocuments.us/reader033/viewer/2022061117/5467e14db4af9f5d3f8b5a1e/html5/thumbnails/35.jpg)
![Page 36: Copy of OMT for RBS](https://reader033.fdocuments.us/reader033/viewer/2022061117/5467e14db4af9f5d3f8b5a1e/html5/thumbnails/36.jpg)
Antenna sector setup The Antenna Sector settings are shown in the
list box. Create an Antenna Sector by clicking the
“New” button. Change the Antenna Sector Setup by clicking
the “Modify” button. Delete a selected sector by clicking the
“Delete” button. Clicking on the New or Modify button
brings up the Define Setup for Antenna sector dialog box.
![Page 37: Copy of OMT for RBS](https://reader033.fdocuments.us/reader033/viewer/2022061117/5467e14db4af9f5d3f8b5a1e/html5/thumbnails/37.jpg)
Define Setup for Antenna Sector
![Page 38: Copy of OMT for RBS](https://reader033.fdocuments.us/reader033/viewer/2022061117/5467e14db4af9f5d3f8b5a1e/html5/thumbnails/38.jpg)
Choose Frequency, CDU Type, Duplexer and TMA.
Confirm with OK. This brings back the Create IDB dialog box.
Selecting Cancel closes the Antenna Sector Setup dialog box without making any changes. This also brings back the Create IDB dialog box.
![Page 39: Copy of OMT for RBS](https://reader033.fdocuments.us/reader033/viewer/2022061117/5467e14db4af9f5d3f8b5a1e/html5/thumbnails/39.jpg)
![Page 40: Copy of OMT for RBS](https://reader033.fdocuments.us/reader033/viewer/2022061117/5467e14db4af9f5d3f8b5a1e/html5/thumbnails/40.jpg)
Confirm with OK. The OK button is only enabled if the
chosen Cabinet setup and chosen Antenna setup is a valid configuration.
Selecting Cancel closes the Create IDB dialog box without creating a new IDB.
Selecting Clear All clears the Cabinet Setup and the Antenna Sector Setup List Boxes and return the “buttons” to their initial state.
![Page 41: Copy of OMT for RBS](https://reader033.fdocuments.us/reader033/viewer/2022061117/5467e14db4af9f5d3f8b5a1e/html5/thumbnails/41.jpg)
Final Configuration Dialogue Box
![Page 42: Copy of OMT for RBS](https://reader033.fdocuments.us/reader033/viewer/2022061117/5467e14db4af9f5d3f8b5a1e/html5/thumbnails/42.jpg)
Confirm with OK. Selecting Cancel closes the Final Configuration
Selection dialog box without making any changes and returns to the Create IDB dialog box.
If a configuration already exists in the OMT, Local IDB or Connected (Local IDB) state a confirmation window appears. Reconfirm with Yes.
A new confirmation window appears regarding to re-use the data in the previous configuration. Select Yes to re-use data
A re-use data dialog box appears.
![Page 43: Copy of OMT for RBS](https://reader033.fdocuments.us/reader033/viewer/2022061117/5467e14db4af9f5d3f8b5a1e/html5/thumbnails/43.jpg)
Re-use site specific data Dialogue box
![Page 44: Copy of OMT for RBS](https://reader033.fdocuments.us/reader033/viewer/2022061117/5467e14db4af9f5d3f8b5a1e/html5/thumbnails/44.jpg)
Choose the parameters to be re-used. Confirm with OK. Selecting Display brings up a text file in
the default text editor. The text file displays all Site Specific
Data and their values. Selecting Cancel closes the Re-use Site
Specific Data dialog box without re-using any data.
![Page 45: Copy of OMT for RBS](https://reader033.fdocuments.us/reader033/viewer/2022061117/5467e14db4af9f5d3f8b5a1e/html5/thumbnails/45.jpg)
Defining Alarms For each physical alarm, the alarm
position can be defined.Define new values for the Alarm Inlets as follows:
1. Select the Alarm Inlet from the System Overview.
2. Select Operation | Define Alarm Inlets...A Define Alarm Inlets dialog box appears.
![Page 46: Copy of OMT for RBS](https://reader033.fdocuments.us/reader033/viewer/2022061117/5467e14db4af9f5d3f8b5a1e/html5/thumbnails/46.jpg)
Alarm Inlets
![Page 47: Copy of OMT for RBS](https://reader033.fdocuments.us/reader033/viewer/2022061117/5467e14db4af9f5d3f8b5a1e/html5/thumbnails/47.jpg)
3. Select alarm by Inlet number. It is possible to define up to sixteen different
alarms depending on the RBS model. 4. Select Inlet Usage.
5. Insert new value or values. For each Alarm Inlet used for External Alarm a
unique alarm ID, severity and contact closure for alarm (closing/breaking) must be defined.
An optional text comment can also be defined.
![Page 48: Copy of OMT for RBS](https://reader033.fdocuments.us/reader033/viewer/2022061117/5467e14db4af9f5d3f8b5a1e/html5/thumbnails/48.jpg)
6. Confirm with Apply. 7. Execute the Define Command with OK. Selecting Reset reverts all changes to their
original values. Cancel closes the Define Alarm Inlets dialog
box without any changes.
![Page 49: Copy of OMT for RBS](https://reader033.fdocuments.us/reader033/viewer/2022061117/5467e14db4af9f5d3f8b5a1e/html5/thumbnails/49.jpg)
RBS Site Integration The integration of the RBS is performed
with the RBS connected to the BSC and in close cooperation with the BSC personnel.
The RBS commissioning staff will switch the DXU and the TRUs from local to remote mode.
Communication will then be established between BSC and RBS.