Tutorial for iOS users *with the CONNECTED WATCH App

8 July 2014

Table of Contents

1. How to use the watch

2. How to pair the watch to your device

1. Step 1: Prepare your watch for pairing

2. Step 2: Prepare your device by enabling Bluetooth.

3. Step 3: Download the Connected App to your iOS device.

4. Step 4: Pair your device under iOS Bluetooth settings.

3. Registration

4. Setup Notification

5. Watch Demo

Pairing

When the watch is OFF, press POWER & COMMAND buttons until 1st beep (approx. 3sec) and all icons will blink every 2 sec.

Reset the watch

Press PAGE LEFT or PAGE RIGHT to view additional information or back to the time mode

Back Light

Tap once the POWER button

Digital Display

Digital display supports Latin characters only

COMMAND

PAGE RIGHT PAGE LEFT

SET TIME

pull 1/2 way and turn to set the time

icon and vibrate with optional beeps

POWER

Power on/off > 3 sec

NOTIFICATIONS DISPLAY

First turn off the watch by Pressing the POWER button for 3 sec. Press and hold the 4 buttons together until you see the ALERT icon . Then the watch will turn off.

NOTIFICATIONS

Incoming Call, Missed Call notification:

Caller ID will be displayed during

incoming calls. Call numbers will be

Displayed if it has not been stored

as contact in your phone book.

*Caller ID supports Latin characters only.

Call notification

Caller ID

Text and Social Media alerts:

Support SMS, MMS and social

media posts on Facebook and

message notification from

Skype, Line, WhatsApp, WeChat, Instagram and more..

NOTIFICATIONS

Message notification

Number of notification

Calendar & Reminder alerts: Alert you when there are upcoming event reminders

Email alerts: Inbound email alerts.

NOTIFICATIONS

number of

notification

event

notification

event

notification

subject of

event

Low and Critical battery alerts:

The CONNECTED display shows the battery percentage and the low and critical

battery icons blinks respectively.

percentage of

phone battery

NOTIFICATIONS

low battery alert

To find the COOKOO watch The watch beeps and blinks when tapping

The find my watch icon in the Connected Watch App.

After tapping the out of range icon , the watch

beeps and blinks when your phone and watch are

apart from each other.

To activate out of range notification

NOTIFICATIONS

beep & vibration

To acknowledge the notification Press the COMMAND button or check the notification on your mobile phone or tablet.

To mute/unmute your watch

When there have no notification, press the COMMAND button for 5 sec

to mute the watch. Press another 5 sec to unmute the watch and you will hear a beep sound.

NOTIFICATIONS

Vibration only

Beep and Vibration

COMMAND

press 5 sec to change notification mode

Show status

Tap the Camera icon in the Connected Watch App, this will trigger

the camera interface of the app. Press the COMMAND button you can take photos remotely.

Action : Remote take picture

COMMAND

press once to trigger camera

COMMAND

Action : Remote control music

When using the music player on your phone, you can use the COMMAND button to control the music playback (play, pause, skip, and stop). Start the music player as you normally would on your iPhone. Once the music begins playing, you can use the COMMAND button to control playback. The following music controls are available:

Play/Pause -- press and release the COMMAND button Skip Track -- press COMMAND+PAGE LEFT button Stop -- press COMMAND+PAGE RIGHT button

short/medium/long press to control music

When the music player is active on your phone, the COMMAND button actions will automatically control the music playback

PAGE RIGHT PAGE LEFT

Pair the watch Get started

Tap the App Store icon on

your device to download the free

App.

Then, tap Search and type Connected Watch.

Select and download the

Connected Watch App.

BEFORE PAIR : DOWNLOAD THE APP ONTO YOUR DEVICE

Set your watch into the pairing mode

When the watch is OFF, press COMMAND +

POWER buttons until 1st beep (3sec) and all icons will blink.

PAIRING THE WATCH WITH YOUR DEVICE

COMMAND POWER

When connected, the connected icon will be displayed on the watch

Press both

button for 3 sec

ENABLING BLUETOOTH ON YOUR DEVICE

Ensure that your Bluetooth is

switched ON.

Bluetooth Pairing Request

COOKOO would like to pair with your iPhone.

PAIRING THE WATCH WITH YOUR DEVICE

Search COOKOO watch under the device menu.

COOKOO

Sign up or Log into your

CONNECTEDEVICE

Account

(! Note : New Users, please

check your email account for

sign up confirmation.)

REGISTER WITH CONNECTEDEVICE ACCOUNT

Fill in all fields below and dont forget to tap the I agree checkbox

below. Tap Sign-up!.

After the registration process,

tap the

icon on the bottom left to

see your Device Radar You should see your COOKOO watch in your Visible Devices

List.

The symbol confirms

successful pairing.

You can now use your watch to receive notifications!

COOKOO

CONFIRM DEVICE

Check your registered email address to ensure youve received your Welcome Email.

CONFIRM REGISTRATION

Launch your CONNECTED Watch App and tap Alerts, in

the above right hand corner.

The color GREEN within the circular

knobs indicates the

notifications you will

receive onto your watch.

If you wish to

turn off

certain notifications,

swipe the circular knob to your left.

SET UP NOTIFICATION ITEMS

Go into your notification center under your device

settings to check your devices push notifications

You will be taken to this screen.

The Include section is where you can check

whether or not your call, messages, and

other alerts are push-

notifications enabled.

Here, you may also deselect any of these notifications if you do

not wish to receive

them on your watch or device.

You can now receive notifications you want.

REGARDING NOTIFICAITON CENTER OF iOS

SET UP NOTIFICATIONS : HOW TO SET YOUR DEVICE AND WATCH NOTIFICATIONS (continued specific instructions for EMAIL NOTIFICATION SET UPS)

Go into your notification center under your device

settings to check your devices push notifications.

It is IMPORTANT to note that

iOS doesnt set up your email push notifications by default. You need to check

this yourself.

To receive

notifications for emails, your

MAIL should be under the INCLUDE

Section of your Notification

Center. This means it is enabled.

Tap MAIL to check the notifications-enabled email

accounts

Tap on your email account on

your device

Adjust your Alert Style & Sounds

and Show in notification center option, then, youre done.

!! If you have multiple email

accounts on your device, enable

notifications for the account(s)

you wish to receive notifications

from. This way, you get your

preferred email notifications on

your device and your watch. !!

SET UP NOTIFICATIONS : HOW TO SET YOUR DEVICE AND WATCH NOTIFICATIONS (continued specific instructions for EMAIL NOTIFICATION SET UPS)

IF YOU WANT TO SEE THE ACTION OF THE WATCH YOU CAN TRY THE DEMO

In your Connected Watch App home screen, tap the

icon on the bottom left to see your Device Radar

COOKOO

COOKOO

Tap COOKOO under your Visible Devices.

Then, tap Demo Features in your

menu

COOKOO

Tap on the above icons to trigger

notifications to your watch.

An icon will then light up on your

watch face when you tap on each

demo function.

IF YOU WANT TO SEE THE ACTION OF THE WATCH YOU CAN TRY THE DEMO

COOKOO

If you discovered a problem or that you are not

receiving notifications, please feel free to open a

support ticket at support@connectedevice.com

Please include your mobile phone model, OS

version, app version, and any other details to help

with the investigation.

PROBLEMS?

Thank you !