Configuring RBS 6201 GSM With RUS

7/16/2019 Configuring RBS 6201 GSM With RUS

1/24

Configuring RBS

6201 GSM with RUS

Muez Abdelazim, Zain_HQ_KRT

30_OCT_2011


2/24

RUS overview

6/9/2013

Muez's

Knowledge2


3/24

The following variants are available:

RUS 01 B0

RUS 01 B8

The name convention can be expressed as:

RU t = G | L | W | S; G for GSM, L for LTE, W for WCDMA, S for Multistandard

gg = generation; 01 and so on

bb = 3GPP band; B1 and so on

Variants

6/9/2013

Muez's

Knowledge3


4/24

The RUS is certified for 60 W. The default output power without license keysis 20 W.

License keys are used to set the output power to 40 W or 60 W.

The RUS has the following functions:

Transceiving Receiving Processing (TRP)

Uplink and downlink filtering

Power Amplifier (PA) functions

Up to four carriers downlink and uplink with 2-RX diversity

Function Description

6/9/2013

Muez's

Knowledge4


5/24

1) Based on normal operation for afull operating board.

(2) Without TMA and GPS.

(3) With TMA and GPS.

(4) Without GPS.

DUG overview

6/9/2013

Muez's

Knowledge5


6/24

Opening Create IDB Window

1. Start the OMT.

2. Select Configuration > Create IDB... to open the Create IDB window.

Setting IDB parameter for RBSs with RUS

(4+4+4)

6/9/2013

Muez's

Knowledge6


7/24


8/24


9/24


10/24


11/24


12/24


13/24


14/24


15/24

This section describes how to define the Multi Carrier Transceiver (MCTR)

configuration. The number of TRXs per MCTR can be changed using createIDB.

1. Select Configuration > Define > MCTR... to display the Define MCTR

Configuration dialog box.

2. Select the applicable MCTR instance from the list.

3. In the Power Distribution box, select the MCTR configuration.

4. Click OK, when all MCTR configurations are set.

Defining MCTR Configuration

6/9/2013Muez'sKnowledge15


16/24

The Power distribution can be set in MCTR configuration is depending onthe

TRX configuration defined in RBS:

For config 1/1/1 power must be/can set as 47 dBm (max value)

For config 2/2/2 power must be/can set as 45 or 43 dBm (max Value)

For config 3/3/3 power must be/can set as 43 dBm (max Value)

For config 4/4/4 power must be/can set as 42 dBm (Max Value)

Defining MCTR Configuration



17/24


18/24

Well continue by adding another 4/4/4 with new DUG.

Setting IDB parameter for RBSs with RUS

(8+8+8)



19/24


20/24

Defining Node Parameters(Master Node)



21/24

Defining Node Parameters(Slave Node)



22/24

Defining ESB delay



23/24

Define TF compensation

Select Configuration > Define > TF compensation



24/24

Thank you

Muez Abdelazim, Zain_HQ_KRT

30_OCT_2011

Configuring RBS 6201 GSM With RUS

Documents

Transcript of Configuring RBS 6201 GSM With RUS