Commercial and Military Product Catalog(1)

Datron World Communications, Inc. 3030 Enterprise Court, Vista, CA, USA 92081 P: +1-760-597-1500 F: +1-760-597-1510 E: [email protected] W: http://www.dtwc.com

click here to skip to the table of contents

January 2009 product catalogCOMMERCIAL AND MILITARY

This page is intentionally blank.

DATRON WORLD COMMUNICATIONS company overview

Introduction

Datron World Communications, Inc (DWC) is a privately owned company that is a world leader in voice and data radio

communications. The company designs, manufactures and distributes its radio products and communications systems to

leading government, military and industrial organizations in over 100 countries worldwide through a network of local

sales and service representatives. DWC offers its customers reliable equipment and comprehensive services to satisfy

specific mission requirements. The company is widely recognized as the best value supplier in the industry by offering

high performance products with low overall life cycle cost.

Products

DWCs communications equipment includes a selection of HF and VHF products that satisfy commercial and military voice and data requirements, and a complete line of APCO Project 25 compliant VHF radios (GuardianTM product line) designed for users in the Public Safety market. This catalog focuses solely on the HF and VHF commercial and military products. Information about the GuardianTM product line is contained in a separate catalog (see Guardian Product Catalog). DWCs HF radio products include transceivers, accessories, and ancillary equipment that can be configured to satisfy a wide variety of voice and data applications. The 125W 7000-series transceivers are offered in a commercial model, a rugged submersible package, and a transportable Flyaway configuration designed for emergency rapid deployment situations. Accessory equipment includes high power RF amplifiers, automatic antenna tuners, full-function remote control units, and power supplies. These systems use a common, easily upgradeable platform that incorporates mission-critical embedded features such as MIL-STD-188-141B ALE, digital encryption, and full remote control capability. A 20W tactical manpack, the PRC1099A, provides portable HF communications and forms the core of its own 20W, 100W, and 400W systems for use in a variety of mobile configurations.

DWCs tactical VHF products include handheld, manpack, and vehicular radio systems that operate in either clear channel or full-band frequency hopping modes with complementary digital encryption. The newest VHF product is the HH7700. It is a compact and lightweight handheld radio operating in fixed frequency mode from 30-87.975 MHz with optional voice encryption. The PRC1077 is a fixed frequency 30 to 87.975 MHz tactical manpack, which is compatible in form, fit, and function with existing military inventories of mounts, antenna, batteries, and audio devices. The PRC1060/1070/1080 Squad radio is a family of 30 to 87.975 MHz handheld radios; all are completely interoperable with the HH7700, PRC1077 and Spectre VR radios in fixed frequency modes. The PRC1080 also has ECCM and COMSEC capabilities compatible with the PRC2100V. A complete line of accessories and vehicular systems, including mobile mounts and high-power RF booster amplifiers, are also available. In addition, the Squad radio is now available with 5W power output. The PRC2100V is part of the Spectre VR family of next generation communications equipment. It is a technology-rich radio, combining high-performance with low life-cycle cost. It provides users with voice and data capabilities, GPS, ECCM and COMSEC, and an intuitive man/machine interface in the users native language, that represents todays best value in a tactical communications system. Datron also offers a wide range of data products and systems to satisfy requirements ranging from commercial applications to full military configurations. Custom radio control software permits the quick and reliable programming and operation of all of DWCs HF radio products. In addition to offering automatic equipment control, DWCs flagship automated HF Email software, DatronLINK, provides transfer of text, files, or imaging data via HF radio links. It has message relay and gateway capabilities, and Internet, LAN and POP3/SMTP E-mail connectivity.

System Capabilities

DWC also designs and implements complete communication solutions that are expertly tailored to the satisfaction of the customer. Examples of this include ground-to-air HF airport systems with selective calling, high-power (up to 5kW) tactical voice and data systems, and mobile communications centers. Project management, site surveys, OEM equipment sourcing, systems integration, and complete installation and training services are all part of DWCs systems capability.

Summary

DWCs radio products are recognized around the world for their ease of operation, reliability, serviceability and affordability. Almost all product design and manufacturing is done at its ISO9001-2001 certified facility in Vista, California, U.S.A., and DWCs global network of factory trained sales and service representatives enable it to provide rapid, local support to customers needs. Factory and field training courses at all levels are offered for each product and communication system. With over 30 years of design and manufacturing experience, the Datron organization places strong emphasis on product research, quality, and total customer satisfaction. For more information, contact us at [email protected] or visit our web site at http://www.dtwc.com

DATRON WORLD COMMUNICATIONS service information

Engineering Assistance

Your communications requirements are important to us. Applications Engineering assistance is available at Datron to answer questions concerning the use of our products in your communications systems. This assistance is a Datron service that is available free of charge. For more information, contact your Datron Representative or call the factory and ask to speak with an Applications Engineer.

Maintenance Facilities

Datron has experienced repair technicians on staff that are qualified to install, maintain, and repair Datron communications equipment. If you should need direct factory assistance, Datron is prepared to supply factory-trained field service personnel to assist in the installation, operation, maintenance, and service of your communications equipment. We also have trained representatives in many areas of the world that can provide this maintenance service. For more information, contact your Datron Representative or one of Datrons Field Service Engineers.

Technical Training

Datron provides comprehensive training in the installation, operation, and maintenance of all Datron equipment. Training courses can be designed to meet individual customer requirements. These courses can be held either at our manufacturing facility in Vista, California, or at the customers site. All courses are scheduled on a first-come, first-served basis. For more information, contact your Datron Representative.

DATRON PRODUCT CATALOG navigation guide

Table of Contents

The Table of Contents is arranged so that you can easily locate the particular product or system that you need. Refer to major sections by referencing the name and number on the tab pages. Major catalog sections and subsections are listed in the Table of Contents by page number.

Additional Literature And Product Notes

Datron has published additional information on the products described in each section of the catalog. This includes focused data sheets and brochures. You may obtain this literature either from our website (http://www.dtwc.com), by contacting your Datron representative, or by contacting the Datron Marketing Department.

Disclaimer And Updates

Because Datron routinely upgrades the quality of its products and systems, all information contained in this catalog is subject to change without notice. Updates to the catalog will be published on a periodic basis.

Comments and Requests For Information

We encourage comments on our product catalog. In the back of the catalog you will find a page that will allow you to comment on the quality, format, and content of the catalog if you choose to do so. The back of the Comments page contains the address of the Marketing Department at Datron. Your suggestions or requests for additional information should be sent directly to that address for rapid processing.

DATRON PRODUCT CATALOG table of contents

Section One RT7000 Series HF Transceivers 1.1

Introduction 1.2

RT7000 Series Transceivers 1.2

1. Transceivers with full-function front panels 1.3 2. Transceivers with blank or modified front panels 1.3 3. Receivers 1.5 4. Transmitters 1.5 RT7000 Internal Options 1.5

RT7000 Remote Control Units 1.9

RT7000 Accessory Equipment 1.11 1. RF Power Amplifiers 1.11 2. Power Supplies and Adapters 1.12 3. Broadband Antennas 1.13 4. Narrowband Antennas 1.15 5. Automatic Antenna Tuners 1.17 6. Audio Devices 1.18 7. Mounting Kits 1.19 8. Miscellaneous Accessories 1.21 9. Data System Accessories 1.25

Broadband Antenna Configuration Diagrams 1.30

Accessory Wiring Diagrams 1.33

Rack Equipment Configuration 1.35

RT7000 System Configurations 1.36 1. RT7000 125W Systems 1.39 2. RT7000 400W/500W Systems 1.77 3. RT7000 1000W Systems 1.113

RT7000 Equipment Spares 1.132

1. Spare Module Assemblies for the RT7000-Series 1.132 2. Standard Spares Kits for the RT7000-Series 1.133 3. Individual Piece Part Spares 1.135 4. Maintenance Kits for the RT7000-Series 1.135

RT7000 Manuals 1.136

roll over the section or subsection to select it


Section Two PRC1099A 1.6 MHz MANPACK TRANSCEIVER 2.1

Introduction 2.2

Tactical Manpack Transceiver 2.3

Transceiver Internal Options 2.3

Transceiver Manpack Accessories 2.4 1. Manpack Power Accessories 2.4 2. Transceiver Carrying Accessories 2.6 3. Transceiver Audio Accessories 2.6 4. Transceiver Manpack Antennas 2.7

PRC1099A Manpack System 2.9

PRC1099A Vehicular Systems 2.10

PRC1099A Vehicular Accessories 2.11 1. PRC1099A Vehicular Mounts 2.11 2. RF High Power Amplifiers 2.12 3. PRC1099A Vehicular Antennas 2.13 4. PRC1099A Deployable Antennas 2.13 5. PRC1099A Vehicular Antenna tuners 2.14 6. External Loudspeaker 2.14 7. PRC1099A Primary Power Accessories 2.14

PRC1099A System Configurations 2.16

PRC1099A Equipment Spares 2.23

1. Spare Module Assemblies for the 1099A-Series 2.23 2. Standard Spares Kits for the PRC1099A 2.24 3. Individual Piece Part Spares 2.25

PRC1099A Manuals 2.26


Section Three TW7000 Series HF Transceivers 3.1

Introduction 3.2

TW7000-Series Transceivers 3.3 1. Transceivers with full-function front panels 3.3 2. Transceivers with blank or modified front panels 3.3 3. Receivers 3.4 4. Transmitters 3.4

TW7000 Internal Options 3.5

TW7000 Remote Control Units 3.8

TW7000 Accessory Equipment 3.9 1. RF Power Amplifiers 3.10 2. Power Supplies and Adapters 3.11 3. Broadband Antennas 3.12 4. Narrowband Antennas 3.13 5. Automatic Antenna Tuners 3.14 6. Audio Devices 3.15 7. Mounting Kits 3.16 8. Miscellaneous Accessories 3.17 9. Data System Accessories 3.20

Broadband Antenna Configuration Diagrams 3.25

Accessory Wiring Diagrams 3.28

Rack Equipment Configurations 3.31

TW7000 System Configurations 3.32

1. TW7000 125W Systems 3.33 2. TW7000 500W Systems 3.62 3. TW7000 1000W System 3.66

TW7000 Equipment Spares 3.70

1. Spare Module Assemblies for the TW7000-Series 3.70 2. Standard Spares Kits for the TW7000 3.71 3. Individual Piece Part Spares 3.73 4. Maintenance Kits for the TW7000-Series 3.73

TW7000 Manuals 3.74


Section Four TW7000F HF Transceiver 4.1

Introduction 4.2

TW7000F Internal Options 4.3

Portable Power Supply for the TW7000F 4.3

Remote Control Units for the TW7000F 4.3

Accessories for the TW7000F 4.3 1. RF Amplifiers 4.3 2. Power Supplies 4.3 3. Antennas 4.4 4. Audio Devices 4.4 5. Data System Accessories 4.4 6. Miscellaneous Options and Accessories for the TW7000F 4.4

TW7000F System Configurations 4.6

TW7000F Equipment Spares 4.9 1. Spare Module Assemblies for the TW7000F-Series 4.9 2. Standard Spares Kits for the TW7000F 4.10 3. Individual Piece Part Spares 4.11 4. Maintenance Kits for the TW7000-Series 4.11 TW7000F Manuals 4.12

Section Five Data Communication Products 5.1

Introduction 5.2

5300-Series Modems 5.3

110B-Series Modems 5.3

Rugged Tactical Laptop Computer 5.4

Integrated Solutions 5.5

Software Packages for Data Communication 5.6

Typical Data Configurations 5.10


Section Six PRC1060/1070/1080 SQUAD RADIO 6.1

Introduction 6.2

Squad Radio Models 6.3

PRC1070 Upgrade Kit 6.4

Crypto Management System 6.4

PRC1080 Programming Accessories 6.6

Squad Radio Accessories 6.8 1. Batteries for the Squad Radio 6.8 2. Chargers 6.8 3. Carrying Packs 6.9 4. Audio Accessories 6.9 5. Manpack Antennas 6.10

Vehicular Configurations for the Squad Radio 6.11

1. Mobile Equipment 6.11 2. Vehicular Configurations 6.12

Squad Radio Spares 6.17

1. Spare Module Assemblies for the PRC1060/70/80 6.17 2. Standard Spares Kits 6.17 3. Individual Piece Part Spares 6.19

PRC1060/70/80 Manuals 6.19

Section Seven PRC1077 TACTICAL VHF FM MANPACK RADIO 7.1

Introduction 7.2

PRC1077 Radios 7.3

Extended Control Options for the PRC1077 7.3

Encryption Options for the PRC1077 7.3


Accessories for the PRC1077 7.5 1. Manpack Power Accessories 7.5 2. Transceiver Carrying Accessories 7.7 3. Transceiver Audio Accessories 7.8 4. Transceiver Manpack Antennas 7.8 5. Retransmission Equipment for the PRC1077 7.9

PRC1077 Manpack System 7.10

PRC1077 Tactical Vehicular Systems 7.11

PRC1077 Vehicular Accessories 7.12 1. Mounts and Adapters 7.12 2. RF Amplifiers 7.12 3. Mobile Antennas 7.13 4. Control and Audio Accessories 7.13 5. Mobile Power Accessories 7.13

PRC1077 Fixed Station Power Accessories 7.14

PRC1077 System Configurations 7.14

PRC1077 Spares 7.31 1. Spare Module Assemblies for the PRC1077 7.31 2. Standard Spares Kits 7.31 3. Individual Piece Part Spares 7.32

PRC1077 Manuals 7.33

Section Eight Spectre V Tactical Transceivers 8.1

Introduction 8.2

Spectre V Transceivers 8.3

Internal Features of the Spectre V 8.3

IP Interface Option 8.4

Accessories for the Spectre V 8.5 1. Power Sources - Batteries and Chargers 8.5 2. Tactical Antennas 8.5 3. Audio Accessories 8.6 4. Harnesses 8.7 5. Retransmission Equipment 8.7 6. Data Accessories 8.7 7. Remote Control 8.8


Channel Management Systems 8.9 1. Overview 8.9 2. Features 8.9 3. Programming Accessories 8.10

Spectre V Manpack System 8.12

Spectre V Tactical Vehicular Systems 8.13

Spectre V Vehicular Accessories 8.14 1. Mobile Mounts and Adapters 8.14 2. RF Amplifiers 8.15 3. Mobile Antennas 8.15 4. Audio Accessories 8.16 5. Mobile Power Accessories 8.16

Typical Vehicular Systems 8.17 1. Low Power Mobile System 8.17 2. Dual Low Power Mobile System 8.17 3. High Power Mobile System 8.18 4. Dual High Power Mobile System 8.18

PRC2100 System Configurations 8.19

Spectre V Equipment Spares 8.27 1. Spare Module Assemblies for the Spectre V Equipment 8.27 2. Standard Spares Kits 8.28 3. Individual Piece Part Spares 8.29

Spectre V Manuals 8.30

Section Nine HH7700 VHF Handheld Radio 9.1

Introduction 9.2

HH7700 Radio 9.3

Encryption Option 9.3

HH7700 Accessory Equipment 9.3 1. Batteries 9.3 2. Charger 9.4 3. Audio Accessories 9.4 4. Antennas 9.4 5. Carrying Accessories 9.4


HH7700 Programming Accessories 9.5

HH7700 Kits 9.7

HH7700 Radio Spares 9.9

HH7700 Manuals 9.9

Section Ten Surge Suppressers and Grounding Kits 10.1

Surge Protection 10.2 1. RF and EMI Coaxial Surge Suppressers 10.2 2. AC Power Line Surge Suppressers 10.2

AC Line Conditioning 10.3

Rack & Product Grounding Kits 10.4

Section Eleven Spares 11.1

Introduction to Spares 11.2

Spare Module Assemblies, Combined Listing 11.4

Spare Kits, Combined Listing 11.8

Section Twelve Manuals 12.1

Section Thirteen Warranties 13.1

Warranties 13.2

Software License Agreement and Warranty 13.2

One Year Limited Warranty and Rememdies 13.2

Safety Considerations 13.4

Section 11

RT7000 Series HF Transceivers section 1

Section 12


Features

1.6 to 30 MHz (100 kHz - Rx) Multiple Models 125W PEP/100WAverage Multi-mode capability Continuous Duty Voice and Data Mobile and Base Stations Up to 1000 Preset Channels Multi-Protocol Remote Control Embedded Voice Encryption Option BITE Capability MIL-STD-188-141B ALE Option

Introduction

The RT7000-series is a rugged, 1.6-30 MHz HF transceiver family designed to provide long distance voice and data

communication capability over HF radio links. A complete line of accessories including RF booster amplifiers, antenna

tuners, and power supplies are available to complement the core RT7000 and form system configurations with RF power

levels up to 5000W. High-speed modems, rugged computer sub-systems, and application software packages help

configure even the most complex network data system.

All models in the RT7000-series are waterproof and environmentally rugged to meet MIL-STD-810 for shock, vibration, temperature, humidity, sand, and dust. The transceivers are available in both 12V and 28V versions for use in all types of vehicles. The RF output power is conservatively rated at 125W, PEP, and 100W, average, in a continuous key-down mode when used with the optional fan kit. Full protection is provided against reverse polarity, over-voltage, and antenna mismatch. The radio now includes as standard a DSP-based voice enhancement module that enhances the received voice quality. Automatic BITE capability, with fault detection down to the module level is standard in all RT7000s and allows even unskilled operators to easily repair the radio at the field level.

Other plug-in features that can easily be added to the standard transceiver include MIL-STD-188-141B compliant automatic link establishment (ALE), high-level voice encryption, and special STANAG compliant Wide Band data filters. A variety of remote control options including extended front panel control, full function, long-range remote control, and computer control are offered for use with any of the transceivers.

Section 13


RT7000 Series Transceivers

All models of the RT7000 are supplied with an operators manual. The technical manual must be ordered separately.

1. Transceivers with full-function front panels a. RT7000-12 b. RT7000-28 c. RT7000-12PP d. RT7000-28PP

RT7000-12

Synthesized, microprocessor controlled, ruggedized HF transceiver covering the full 1.6 to 30.00000 MHZ frequency band (receive - 100 kHz-30 MHz). Requires 12 Vdc primary power input. RF Output power is 125W PEP/100W average (three programmable levels). USB, LSB, CW and AME modes are standard. Features simplex and semi-duplex channels; continuous coverage in 10 Hz steps; keypad programmable; non-volatile storage on 256 channels (expandable to 1000). Comes standard with an RS232 serial interface, factory set to 9600 baud. (Optional RS422/423/485.) Complete with interfaces for connection to Datrons RF power amplifiers and antenna tuners (100 channel memory included). Meets MIL-STD-810 for operation under severe vibration and shock; waterproof and submersible. Supplied with C991556 dc power cable and operator manual.

RT7000-28

Identical to the RT7000-12 except it requires 28 Vdc primary power input.

RT7000-12PP

Identical to the RT7000-12, but modified to work with the RT5830A pre/post-selector unit.

RT7000-28PP

Identical to the RT7000-28, but modified to work with the RT5830A pre/post-selector unit.

2. Transceivers with blank or modifies front panels a. RT7000E-12 b. RT7000E-28 c. RT7000C-12 d. RT7000C-28 e. RT7000RF-12 f. RT7000RF-28 g. RT7000RI-12 h. RT7000RI-28

Section 14


RT7000E-12

Extended control model - requires +12Vdc primary power. Standard front panel is replaced with blank front panel containing internal line drivers and a connector for the C991943 control cable. The RT7000E-12 is used with RT7201E control console for remote operation up to 15m (50 ft.). Same functionality as the RT7000-12 except has remote-only operation. Supplied with DC cable. Order C991943 control cable separately (standard length is 9m).

RT7000E-28

Identical to the RT7000E-12 except it requires 28 Vdc primary power input. Same functionality as the RT7000-28 except has remote-only operation.

RT7000C-12

Transceiver designed for control from external computer only. Requires +12Vdc primary power input. Supplied with DC cable. Standard front panel is replaced with a blank front panel. Same functionality as the RT7000-12 except has remote-only operation (no local control is possible). External computer connects to the radio via the COM port on the rear of the radio. Order radio control software separately.

RT7000C-28

Identical to the RT7000C-12 except requires 28 Vdc primary power input. Same functionality as the RT7000-28 except has remote-only operation. Order radio control software separately.

RT7000RF-12

Transceiver designed for long haul remote only use. Requires +12Vdc primary power input. Standard front panel is replaced with a blank front panel. An internal modem card (7000RF) is installed. RT7000RF-12 is used with the RT7201F remote control console for full function FSK remote control over long distances - distance unlimited as long as line loss kept below certain limits; contact factory for details. Supplied with DC cable. Order control cable separately - C992306 for 33 ft cable terminated on both ends, or C992308, qty-2, for cable terminated only on one end). Remote control console connects to the radio via the dedicated remote port on the rear of the radio.

RT7000RF-28

Identical to the RT7000RF-12 except requires 28 Vdc primary power input.

RT7000RI-12

Transceiver designed for remote only use up to 2 km. Requires +12Vdc primary power input. Standard front panel is replaced with a blank front panel; an internal modem card (7000RI) is installed. The RT7000RI-12 is used with the RT7201I remote control console for high-speed, full-function, real-time remote control. Supplied with DC cable. Order control cable separately (C992306 or C992308). Remote control console connects to the radio via the dedicated remote port on the rear of the radio.

RT7000RI-28

Identical to the RT7000RI-12 except requires 28 Vdc primary power input.

Section 15


3. Receivers a. RT7000RX-12 b. RT7000RX-28

RT7000RX-12

Receive-only version of RT7000-12. Requires +12Vdc primary power input. Has full-function front panel. Supplied with DC cable.

RT7000RX-28

Receive-only version of the RT7000RX-28. Requires +28Vdc primary power input. Has full-function front panel. Supplied with DC cable.

4. Transmitters a. RT7000TX-12

b. RT7000TX-28

RT7000TX-12

Transmit-only version of the RT7000-12. Requires +12Vdc primary power input. Has full-function front panel. Supplied with DC cable.

RT7000TX-28

Transmit-only version of the RT7000-28. Requires +28Vdc primary power input. Has full-function front panel. Supplied with DC cable.

RT7000 Internal Options

All of the options listed can be ordered either installed with the radio or added on later as a simple field upgrade to units already in use. Prices include factory installation at the time the radio is ordered. For field installation, contact your Datron Representative. The options are mostly contained on individual PC assemblies and can be installed in the field using standard tools. Options listed below can all be embedded inside the RT7000 (except for RT7000-IP); they include:

1. RT7000-IP IP Interface 2. 7000ACH - 1000 memory channels 3. 7000ALE-141B - MIL-STD-188-141B ALE 4. 7000ALE- FED-STD-1045A ALE 5. 7000CW - CW filter 6. 7000CW1 CW and Wideband filter 7. 7000ENCR - Digital voice encryption 8. 7000HS - 0.1ppm high stability reference

Section 16


9. 7000NB - Noise blanker 10. 7000RCDR - Audio recorder interface 11. 7000RF - FSK modem for communication with 7201F Remote Control Unit 12. 7000RI High-speed modem for communication with 7201I Remote Control Unit 13. 7000RS - 2nd COM port configuration option 14. RT7000AIRSELCALL - Interface to Motorola N1304 SELCAL, or compatible, device 15. 7000VEM - DSP-based voice enhancement module 16. 7000WB1 - Wideband data filter

RT7000-IP

IP interface option for the RT7000 radio to allow remote control of the radio over a LAN or WAN TCP/IP network. This option equips the radio with a 10 Base T Ethernet port via an external cable for easy connection to the LAN/WAN. The IP interface extends the radio RS-232 serial interface over TCP/IP using a serial tunneling protocol and virtual serial (COM) driver on a MS Windows PC. It allows the assignment of a static IP address that is associated with the radio. To upgrade existing radios with the IP interface option order part number RT7000-IP-UPGKIT.

7000ACH

Increases the radios preset (memory) channels to 1000 (standard is 256).

7000ALE-141B A MIL-STD-188-141B module that provides a fully compliant system for ALE operations including high-speed scanning, sounding, link quality analysis, and send/receive orderwire AMD message capability. It provides selective calling as well as best available frequency selection and includes the real time clock option. All channel and ALE parameters can be programmed into the radios either from the front panel or using one of Datrons custom software programs (DatronLINK or RC2). The radio keypad or external PC-style keyboard can be used for message composition. All messages, whether transmit or receive, are displayed on the radios custom LCD display and stored in memory.

7000ALE A FED-STD-1045A ALE module that provides a fully compliant system for ALE operations including high-speed scanning, sounding, link quality analysis, and send/receive orderwire AMD message capability. It provides selective calling as well as best available frequency selection and includes the real time clock option. All channel and ALE parameters can be programmed into the radios either from the front panel or using one of Datrons custom software programs (DatronLINK or RC2). The radio keypad or external PC-style keyboard can be used for message composition. All messages, whether transmit or receive, are displayed on the radios custom LCD display and stored in memory.

7000CW 500 Hz narrowband filter for CW operation. Installed on the 5 MHz IF subassembly in place of WB data filter (when ordered).

Section 17


7000CW1 500 Hz narrowband filter for CW operation and 3000 Hz (300-3300 kHz) wideband filter for data operation. With this option, the wideband filter is used for voice operation.

7000ENCR * THIS ITEM IS USML An encryption module that provides high-level digital encryption of voice transmissions. It contains a three-tiered key system with provision for up to 200 local encryption keys programmable either from an external programming module (701450) or from the front panel of the radio. A separate crypto management system (CMS7000) is available to allow user selection and programming of encryption keys from an external PC (contact Datron Applications Engineering). Encryption keys can also be programmed from an external cipher unit (DSP9000 with C992029 cable for DC operation). The 7000ENCR is compatible with the external encrypted handset (DSP9000HS). For more information on the key management system, contact your Datron Representative.

7000HS Provides a reference frequency stability of 0.1 parts per million. It replaces the standard reference with a precision OCXO. (Note: the standard frequency stability of the 7000 transceivers is 0.5 ppm)

7000NB An impulse-type noise blanker that is designed to allow operation of the 7000-series transceivers in a high-noise environment, as in the presence of vehicle ignition noise. The noise blanker circuitry can be externally controlled from the front panel.

7000RCDR

Combines receive and transmit audio and routes them to Accessory #2 connector on the radios rear panel. Typically used with a continuous recording device to monitor RX and TX communications. For split site systems, this option is only required in the receiver.

7000RF

An FSK modem for the 7000-series radios that allows communication with the RT7201F external FSK remote control head. It permits control of the radio remotely from the RT7201F Control Console over an audio 2-wire circuit (with the radio being the master). Used when long-range remote control is required. This option is standard in the 7000RF models of the transceiver, which permits remote-only operation, but is optional in other RT7000 models, which are used if both remote and local control of the transceiver is desired. No HF Data communications are possible through the RT7201F control head.

7000RI

A high-speed modem (I-Type) for the 7000-series radios that allows communication with the RT7201I external remote control head. It permits control of the radio remotely from the RT7201I remote control unit. When installed, it permits reliable real-time remote control up to 2 km. This option is standard in the 7000RI models of the transceiver, which permits remote-only operation, but is optional in other RT7000 models, which are used if both remote and local control of the transceiver is desired. HF Data communications are possible through the RT7201i control head.

*USML REQUIRES WRITTEN AUTHORIZATION FROM THE U.S. DEPARTMENT OF STATE PRIOR TO EXPORT OR RE-EXPORT.

Section 18


7000RS

The 7000-series radios have two external COM ports, both of which are configured for RS232 operation. The 7000RS option allows configuring the second port for RS422/423/485 protocols depending on the user requirements for external control of the radio by a computer.

RT7000AIRSELCALL

Permits the RT7000 radios to operate with the N1304 SELCAL encoder (or equivalent). It adds a secondary PTT line to the radio and allows the use of the ICAO-mandated Ground-to-air SELCAL 3-tone system. Once the calling sequence is sent, the radio returns to normal SSB mode.

7000VEM

This option is now included standard in all 7000-series radios. A DSP speech processing module for the 7000-series radios that improves the quality of received speech signals. It allows the operator to select one of two available signal enhancement modes, either adaptive peaking or spectral subtraction, designed to remove less coherent forms of noise and/or subtract extraneous signals from the received audio to improve the overall signal-to-noise ratio.

7000WB

A 7000-series option that adds a second IF filter specially designed for the passage of data. This is a 300 - 3300 kHz wideband filter with specially tailored group delay characteristics (meets the requirements of STANAG 4285). The filter is selectable from the front panel of the radio (data mode). This option should be ordered if the radio is being used in a data system with a MIL-STD-188-110B data modem.

Section 19


RT7000 Remote Control Units

All functions of the RT7000 can be controlled remotely, either via an external computer or from one of three Datron Remote Control Units listed here. Full-function remote control options available for the RT7000 include an extended control unit (RT7201E) for short distance (up to 50 feet) operation, and remote control units (RT7201I or RT7201F) for longer range using either an integrated high-speed modem (2 km range) or an integrated FSK modem (long range) over a voice-grade 2-wire circuit. The RT7000 is also capable of full computer control (RT7000C) from a PC. Both remote-only and local-remote configurations are available. The former uses a radio with a blank front panel, while the latter uses a radio that has the normal full-function front panel to allow multiple control points. Remote control units include:

1. RT7201E

2. RT7201F

3. RT7201F-110

4. RT7201F-220

5. RT7201I

6. RT7201I-110

7. RT7201I-220

RT7201E

Extended front panel control console for the RT7000E. Allows remote placement of the front panel from the radio up to 50 feet. Comes with mobile mount bracket and feet. Order control cable C991943 (9m is standard length) separately. Control cable attaches to front panel of RT7000E radios. Power is supplied by the radio through the control cable.

RT7201F Full function remote control unit using FSK signaling format. Supports all transceiver functions and options. Includes internal speaker and is powered from 10-30 Vdc. Distance bounded only by signal loss in cable (approximate maximum signal loss is -10 dB). No HF Data communications are possible through the RT7201F control head. Supplied with C992042 dc power cable. Order C992306 control cable separately. If unterminated cables are required, order C992308, qty-2 (specify length). Radio must have 7000RF option installed. Mobile mount bracket and feet are included.

RT7201F-110 Identical to RT7201F except for 110VAC operation. Supplied with C992034 110 VAC power cable. Order C992306 control cable separately. If unterminated cables are required order C992308, qty-2 (specify length). Radio must have 7000RF option installed.

Section 110


RT7201F-220 Identical to RT7201F except for 220VAC operation. Supplied with C992139 220 VAC power cable with NEMA 6-15P plug. Order C992306 control cable separately. If unterminated cables are required order C992308, qty-2 (specify length). Radio must have 7000RF option installed.

RT7201I

High-speed, full function remote control unit (I-Type). Same as RT7201F, except uses I-Type modem. Supports all transceiver functions and options. Includes internal speaker and is powered from 10-30 Vdc. Provides a spare 9600 bps serial channel so that HF data communications are possible through the RT7201I control head. It requires a direct 2-wire link limited to approximately 2 km. Supplied with C992042 dc power cable. Order C992306 control cable separately. If unterminated cables are required, order C992308, qty-2 (specify length). Radio must have 7000RI option installed. Mobile mount bracket and feet are included.

RT7201I-110 Identical to RT7201I except for 110VAC operation. Supplied with C992034 110 VAC power cable. Order C992306 control cable separately. If unterminated cables are required order C992308, qty-2 (specify length). Radio must have 7000RI option installed.

RT7201I-220 Identical to RT7201I except for 220VAC operation. Supplied with C992139 220 VAC power cable with NEMA 6-15P plug. Order C992306 control cable separately. If unterminated cables are required order C992308, qty-2 (specify length). Radio must have 7000RI option installed.

Section 111


RT7000 Accessory Equipment

Datron offers a wide variety of accessory equipment to use with the RT7000. The RT7000 can be configured for fixed station or mobile usage at RF power levels up to 5 kW. A complete line of both broadband and narrowband antenna systems, power supplies, and data devices are also available to complement the base transceiver. The following pages summarize the Datron accessory equipment that can be used with the RT7000 and show the RF, control, and power cables necessary for proper interconnections. Accessory equipment is listed below and encompasses the following categories:

1. RF Power Amplifiers

2. Power Supplies

3. Broadband Antennas

4. Narrowband Antennas

5. Automatic Antenna tuners

6. Audio Accessories

7. Mounting Kits

8. Miscellaneous Accessories

9. Data System Accessories

1. RF Power Amplifiers

All amplifiers (except the DTX75000) are supplied less interface cables; the proper cables must be ordered separately. Amplifiers include:

1. RA400 2. RA500D 3. RA1000D 4. DTX75000

RA400

The RA400 is a 400W, PEP and average, solid-state broadband amplifier with an interface for fully automatic operation with Datrons RT7000 transceivers. Meets MIL-STD-810 for operation under severe vibration and shock. Water-proof and immersible. For mobile or fixed station use - requires separate ac/dc supply for fixed station use (see UPS500 and UPF500). Rated for continuous FSK operation, 28 Vdc (operational 20-32 Vdc). Order C991925 control cable, C991558 dc power cable, and C991510 RF cable separately.

Section 112


RA500D

The RA500D is a 500W HF Linear RF Amplifier designed for continuous duty use with an exciter unit operating in the 1.6 to 30 MHz frequency band to form a high-power HF communication system. The RA500D interfaces seamlessly with Datrons 7000-series of synthesized HF transceivers; however, it can also be used with any transmitter or transceiver having a power output of at least 70W and a compatible control interface. The amplifier is entirely solid state, broadband, and features a built-in ac/dc power supply that allows operation from either 110VAC or 220VAC (standard product is configured for 220 Vac). It is a completely self-contained unit, integrating RF amplifiers, harmonic filters, protective circuitry, and power supplies in a single chassis. The RA500D is housed in an anodized-aluminum 5u rack mount package suitable for standard 19 racks. Order C992222 control cable and C991526-7 RF cable separately.

RA1000D

The RA1000D is a 1000W HF Linear RF Amplifier designed for continuous duty use with an exciter unit operating in the 1.6 to 30 MHz frequency band to form a high-power HF communication system. The RA1000D interfaces seamlessly with Datrons 7000-series of synthesized HF transceivers; however, it can also be used with any transmitter or transceiver having a power output of at least 70W and a compatible control interface. The amplifier is entirely solid state, broadband, and features a built-in ac/dc power supply that allows operation from 220VAC. It is a completely self-contained unit, integrating RF amplifiers, harmonic filters, protective circuitry, and power supplies in a single chassis. The RA1000D is housed in an anodized-aluminum 7u rack mount package suitable for standard 19 racks. Order C992222 control cable and C991526-7 RF cable separately.

DTX75000

The DTX75000 5kW Amplifier sub-system is a fully solid-state amplifier. It offers the efficiency of class AB operation with the linearity of classical class A designs. It incorporates a sophisticated microprocessor-based controller, and is composed of four separate 1250 watt sub-units that are combined to obtain the total 5kW power output. Includes the 5kW amplifier, amplifier interface circuitry, transmit controller, RF combiner, power supply, equipment rack, and connecting cables. Requires the RT7000 (or RT7000TX, TW7000, TW7000TX) as the exciter. The complete system is integrated into a single 19-inch rack with internal forced-air cooling. Should be ordered as a complete system with the exciter. Contact your Datron representative for more details.

2. Power Supplies and Adapters

Ac to dc power supplies are available to power Datron equipment used in a fixed station configuration that require dc primary input power. Power cables must be ordered separately. Datron also offers a line of power switches for use in battery backup systems.

1. UPF7000A-12 2. UPF7000A-12-220 3. UPF7000A-28 4. UPF7000A-28-220

Section 113


5. UPS500 6. UPF500 7. TWPSB 8. TWPSC 9. RAT1000P-110 10. RAT1000P-220

UPF7000A-12

Continuous duty (FSK) 12 Vdc power supply designed to power RT7000-12. Automatic input voltage selection. Accepts 85-240 VAC, 47-63 Hz input. Packaged in rugged waterproof case. Order C991511 dc power cable separately.

UPF7000A-12-220

Same as UPF7000A-12 with standard NEMA 6-15P 220 VAC plug on power cable.

UPF7000A-28

Continuous duty (FSK) 28 Vdc power supply designed to power RT7000-28. Automatic input voltage selection. Accepts 85-240 VAC, 47-63 Hz input. Packaged in rugged waterproof case. Order C991511 dc power cable separately. UPF7000A-28-220

Same as UPF7000A-28 with standard NEMA 6-15P 220 VAC plug on power cable.

UPS500

Linear, CVT-type, 28 Vdc output power supply for RA400. Designed to power either RA400 or RT7000-28/RA400 in 400W fixed station systems in continuous duty (FSK) operation. Accepts either 110 or 220 VAC 10% (jumper selectable), 50 or 60 Hz (jumper selectable); specify ac voltage requirement when ordering. Encased in rugged package suitable for stacking. C991557 power cable to the RA400 must be ordered separately.

UPF500

Continuous duty 28 Vdc power supply designed to power RT7000-28 and the RA400 amplifier. Requires 180-240 VAC, 47-63 Hz input. Packaged in a rugged case. Order C991557 dc power cable separately.

TWPSB

Power supply adapter for 12 Vdc and 28 Vdc input transceivers. Provides automatic switching to customer-supplied backup power source if external mains power fails. Its a high current switch that provides backup for the exciter and associated amplifier (up to 1000W). Please note that the TWPSB is not compatible with the TW500D, RA500D, TW1000D and RA1000D amplifiers.

Section 114


TWPSC

Power supply adapter for 12 Vdc and 28 Vdc input transceivers. Provides automatic switching to customer-supplied backup power source if external mains power fails. Its a low current switch that provides backup for just the exciter (RT7000 @ 100W); if system is used with an associated RF Power Amplifier, the amplifier is placed in bypass mode.

RAT1000P-110

External 28 Vdc power supply for the RAT1000C antenna tuner. MIL OD color. For 110 VAC systems. Used in high power systems whenever a 12 Vdc radio is used or when the control cable run exceeds 50 feet if used with a 28 Vdc radio. Order C991933 (control cable between the radio and the RAT1000P-110) and C991522 (control + power cable from the RAT1000P-110 and the RAT1000C). See system diagrams in the rear of this section for more detail.

RAT1000P-220

Identical to RAT1000P-110 with NEMA 6-15P 220 VAC plug on power cable

3. Broadband Antennas

Datron offers a complete line of broadband HF antennas for fixed station use where space for a proper installation is available. Note: the ABB-series of BB antennas can be deployed in different configurations. The drawings in this catalog in the RT7000 Accessory Equipment section E.10 illustrate 3 basic installation configurations - a delta loop, a rectangle, and a diamond. Both the ABB100 and the ABB1000 can be installed in this fashion. Please refer to that Section of this catalog for more details.

a. 125W Broadband Antennas

1. ABB100AN 2. ABB100BN 3. 701408

ABB100AN

Broadband antenna, 2-30 MHz, 125 W (continuous duty), supplied with 30m RG213 coaxial cable and type N connector. Extended length model for increased efficiency in 2-10 MHz range (antenna length is 43.3 m). Support mast not included.

ABB100BN

Broadband antenna, 2-30 MHz, 125 W (continuous duty), supplied with 30m RG213 coaxial cable and type N connector (antenna length is 34.1 m). Support mast not included.

Section 115


701408

BWDS-90N broadband 1.8 to 54 MHz folded dipole. 300W continuous, 1kW ICAS (intermittent). Full coverage. Stainless steel wire, 90 feet, with BALUN, terminator and type N connector. Order RF cable C991505 separately and specify length. Support mast not included.

b. 1kW Broadband Antennas

1. ABB1000AN 2. ABB1000BN 3. 701408-1

ABB1000AN

Broadband antenna, 2-30 MHz, 1000 W, supplied with 30m RG213 coaxial cable and type N connector. Extended length model for increased efficiency in 2-10 MHz range (antenna length is 43.3 m). Support mast not included.

ABB1000BN

Broadband antenna, 2-30 MHz, 1000 W, supplied with 30m RG213 coaxial cable and type N connector (antenna length is 34.1 m). Support mast not included.

701408-1

BWDS-90N/H1 broadband 1.8 to 54 MHz folded dipole. Full coverage. Stainless steel wire, 90 feet, with BALUN, terminator and type N connector. 1kW, continuous duty power rating. Order RF cable C991505 separately and specify length. Support mast not included.

c. Support Mast

1. AMX

AMX

Tactical, transportable antenna mast kit for ABB100, ABB1000 and 701408 series antennas. Includes approximately 68 ft of mast sections, guy rings, dacron rope guys, guy stakes, mast base, raising halyard rope and pulley supplied in canvas carrying bag with guy hammer.

4. Narrowband Antennas

Narrowband antennas, for both mobile and fixed station configurations, are available from Datron. The narrowband antennas all require an antenna tuner as part of the complete system.

a. Mobile Narrowband Antennas

1. MAR-12 2. MAR-16 3. MAR-16T 4. RA-PA

Section 116


MAR-12

Mobile antenna system. Three section, heavy-duty fiberglass military whip with flexible spring mobile base and mobile mounting bracket. Identical to the MAR-16 but with a length of 3.6m (12 feet). Requires antenna tuner.

MAR-16

Mobile antenna system. Four section, heavy-duty fiberglass military whip with flexible spring mobile base and mobile mounting bracket. Can be tied down horizontally to support NVIS communications. 4.8m (16 ft.) tall. Requires antenna tuner.

MAR-16T

Identical to MAR-16 with tilt whip adapter on flexible spring base. Allows locking antenna into four different positions (from vertical to horizontal) to support NVIS communications. Requires antenna tuner.

RA-MAS

Mobile antenna system. Four section, heavy-duty fiberglass military whip with rigid mobile base and mobile mounting bracket. 4.8m (16 ft.) tall. Requires antenna tuner.

b. Fixed Station Narrowband Antennas

1. ALD-R 2. AW7 3. AW10 4. RA-PAS

ALD-R

The ALD-R is an HF, adjustable-length, deployable, dipole antenna covering the full 2 to 30 MHz frequency range. It comes complete with a laminate carrying bag and manual, 250W power handling capability with a maximum 1.7:1 VSWR at resonance and features superior mechanical and cosmetic characteristics, which provides greater durability and field reliability. Requires antenna tuner.

AW7

7m fiberglass whip; side-fed, with anodized aluminum mounting flange. For marine or fixed-station usage; 500W. Requires antenna tuner.

AW7-M

7m fiberglass whip; side-fed, with anodized aluminum mounting flange. Heavy duty version of the AW7 for marine or fixed-station usage; 500W. Requires antenna tuner.

AW10

10.5m fiberglass whip; side-fed, with galvanized iron mounting flange. For marine or fixed-station usage; 5 kW. Requires antenna tuner.

Section 117


RA-PAS

Portable antenna system, comprised of 120-series 9.6m (32 feet), eight section military whip and 120-28 flange mounting base. Requires antenna tuner.

c. Deployable NVIS Antenna

1. NVISKIT

NVISKIT

Transportable NVIS antenna kit consisting of AS-2259/GR NVIS antenna and ground base with a thumb screw connector. Requires antenna tuner. Order cable C992168 when used with RAT7000B antenna tuner.

5. Automatic Antenna Tuners

Tuners are needed whenever a narrowband antenna is used to transform the complex and variable antenna impedance of the antenna to 50 ohms at the transmitter output.

1. RAT7000B 2. RAT1000C

RAT7000B

Automatic antenna tuner in ruggedized, immersible case, 125W. Operates with whips and long-wire antennas. VSWR monitoring and rapid digital tuning capability. Offers 100 channel memory capability for scanning or silent tune applications. Supplied with mobile mount (w/o shocks) and C991620 0.5m antenna lead. Order C991505 RF cable and C992142 control and power cable separately (specify cable lengths). Optional shock mounted tray available (RAT7000B-SM)

RAT1000C

Automatic antenna tuner in ruggedized, immersible case, 1000W (3-30 MHz) for vehicular or marine installations, (2-30 MHz) for fixed installations. Requires +28 Vdc primary power. Provides automatic high-speed digital tuning on receipt of actuation signal from transceiver. Operates with most whip and long-wire antennas to 50m in length. Includes 100 memory channels for scanning or silent tuning applications. Supplied with C991620 0.5m antenna lead. Order C991933 control cable and C991505 or low-loss C992407 RF cable separately (specify length). Note: If the RAT1000C is being used with an older version of transceiver, the transceiver must have 701BC firmware of higher (radio) and 312C firmware or higher (ALE Card). If the transceiver doesnt have these revisions of firmware, then the P/N 701-312-UPD kit must be ordered for the radio. Note: If a +28Vdc model of the radio is being used, primary power for the RAT1000C can be obtained directly from the radio via the control cable providing the separation between the tuner and the radio is not more than 50 feet. If the separation is greater than 50 feet, then the RAT1000P-110 (RAT1000P-220) must be used in the system to provide the +28Vdc for the tuner. If a +12Vdc model radio is being used, then the RAT1000P-110 (RAT1000P-220) must be used in the system to provide the +28Vdc for the tuner. See description of RAT1000P-110 (RAT100P-220) and the system drawings for more detail.

Section 118


6. Audio Devices

For connection to the transceiver or remote control console and used for the transmission and reception of baseband audio signals.

a. Handsets and Microphones

1. MDR 2. MHS 3. H-250/U 4. MRR 5. DSP9000-HS

MDR

Desk microphone with military-type connector.

MHS

U.S. military-style H-189/U-type handset with military-type connector. H-250/U

Non-repairable version of MHS. Note: The H-250/U requires a U.S. Government export license

MRR

Heavy-duty hand microphone with military-type connector.

DSP9000-HS *THIS ITEM IS USML

Ruggedized, half-duplex audio ciphering handset. Normal operation is fully automatic; user simply selects Plain or Cipher mode. Compatible with 7000ENCR embedded encryption option. Requires DSP9000 external cipher unit with smart programming module (P/N 701450) to program encryption keys and cable (C992029).

b. Headsets

1. H-140/U 2. H3M 3. HPR 4. HSR

H-140/U

Ruggedized headphones with 5-pin connector

*USML REQUIRES WRITTEN AUTHORIZATION FROM THE U.S. DEPARTMENT OF STATE PRIOR TO EXPORT OR RE-EXPORT.

Section 119


H3M

Headset-boom microphone. Single earphone low profile; will fit under GI Kevlar helmet with clip-on push-to-talk switch. HPR

Headphones with military-type connector.

HSR

Dual headset with boom microphone and military-type connector.

c. Miscellaneous Audio

1. KYR

KYR

CW key with military-type connector.

7. Mounting Kits

Datron offers a complete line of shock, rack, and stack mounting assemblies for Datrons RT7000-series and accessory equipment. The shock mounts isolate the equipment from high-impact shock and vibration. The equipment is retained in the mount using four or six quick-detach, military-type butterfly clamps. Four separate military-type heavy-duty shock absorbers are used in each shock mount. Rack mount kits allow mounting the equipment in standard 19 inch racks, while stack mount kits provide the brackets necessary to stack the equipment for use where space is limited.

a. Mobile Mounts for Vehicular Installations

1. RA400-SM 2. RAT1000-SM 3. RAT7000B-SM 4. RT5300SM

5. UNIV-SM 6. UPS500-SM

RA400-SM

Shock mount for RA400 amplifier.

RAT1000-SM

Shock mount for RAT1000C tuner.

RAT7000B-SM

Shock mount for RAT7000B tuner

Section 120


RT5300SM

Shock mount for RT5300 modem. UNIV-SM

Shock mount for RT7000.

UPS500-SM

Shock mount for UPS500.

b. Rack Assemblies

1. RACK7100-OD 2. RACK7100-220-OD 3. RACK7500-OD 4. RACK7500-220-OD

RACK7100-OD

12U standard 19 in. (48 cm) W x 21 in. (53 cm) H, enclosed rack cabinet. Includes 110 VAC power strip. MIL OD color. For 115 VAC/60 Hz systems. Custom shock mounts are available. Includes 050-00001 grounding kit. Contact Applications Engineering for special needs (rear doors, etc.)

RACK7100-220-OD

Identical to the RACK7100-OD except designed for 220 VAC/50 Hz systems. Includes NEMA 6-20R receptacles in power strip and NEMA 6-15P ac power plug on main power cable. Contact Applications Engineering for special needs (rear doors, etc.)

RACK7500-OD

19U standard 19 in. (48 cm) W x 33 in. (84 cm) H, enclosed rack cabinet. Includes 110 VAC power strip. MIL OD color. For 110 VAC/60 Hz systems. Custom shock mounts are available. Includes 050-00001 grounding kit. Contact Applications Engineering for special needs (rear doors, etc.)

RACK7500-220-OD

Identical to the RACK7500-OD except designed for 220 VAC/50 Hz systems. Includes NEMA 6-20R receptacles in power strip and NEMA 6-15P ac power plug on main power cable. Contact Applications Engineering for special needs (rear doors, etc.)

c. Rack Mount Kits

1. RT7000RM 2. RT7000RMS 3. UPF7000RM 4. RA400RM 5. RT7201RM

Section 121


RT7000RM

Rack mount kit for the RT7000. Contains two mounting brackets.

RT7000RMS

Rack mount kit complete with slides for extending transceiver to the front of the rack cabinet. Each RT7000RMS contains two mounting rails with slides (Optional rack cabinets available include RACK7100 and RACK7500.)

899115

Cable retractors for use with RMS-type kits.

870002

Cable tie wraps for use with cable retractors (4 per retractor).

UPF7000RM

Rack mount for UPF7000A power supplies.

RA400RM

Rack mount for RA400

RT7201RM

Rack mount kit for all models of RT7201

8. Miscellaneous Accessories

a. Pre/Post-Selector Equipment

1. RT5830A-110 2. RT5830A-220

RT5830A-110

A pre/post-selector that permits operation of co-located HF receivers and transmitters with frequency separation as low as 10%. Housed in a 1U rack mount package. Supplied with 110VAC power cord. The RT5830A-110 must be used with the RT7000-12PP or RT7000-28PP version of the radio. Note: A 125W system configuration using the RT5830A-110 is illustrated in one of the system diagrams at the end of this section. All cable connections are shown. For more complex configurations involving high-power amplifiers, modems, and remote controls, contact your Datron Representative

RT5830A-220

Identical to RT5830A-110 with 220 VAC NEMA 6-15P plug on power cable.

Section 122


b. Customizable Equipment

1. ACU-1000 2. ACU-T

ACU-1000 Modular Interconnection Device

DWC P/N 701419

Provides interconnections between different communications systems. The ACU-1000 can simultaneously cross-band two or more different radio networks, and connect a radio network to a telephone line. Basic chassis module with up to 12 separate interface modules. Standard 19 Rack mountable version for fixed station or mobile command center usage. Requires C992363 cable (ACU to RT7000). Contact your Datron representative or Applications Engineering for system details.

ACU-T Tactical Interconnect System

DWC P/N 701420

Tactical version of the ACU-1000 designed for rapid deployment situations. Transportable model runs off of +12 Vdc primary power. Requires C992363 cable (ACU to RT7000). Contact your Datron representative or Applications Engineering for system details. Internal Options for 701419 and 701420 (contact Applications Engineering)

701421 PSTN Module 701422 DSP2 Radio Interface (one per radio) 701423 Local Telephone Option

c. Remote Audio Equipment

1. REM1045A 2. REM1045A-RM 3. REM1045A-220 4. REM1045A-RM-220

REM1045A

Remote audio interface device. Built-in speaker and audio connector. Provides real-time audio and PTT from the remote site to the local (radio) site. Supplied with 110VAC power cable. 2-wire control between device at remote site and device at local (radio) site.

REM1045A-RM

Rack mountable remote audio interface device. Built-in speaker and audio connector. Provides real-time audio and PTT from the remote site to the local (radio) site. Supplied with 110VAC power cable. 2-wire control between device at remote site and device at local (radio) site.

Section 123


REM1045A-220

Identical to the REM1045A with 220 VAC NEMA 6-15P plug on power cable.

REM1045A-RM-220

Identical to the REM1045A- with 220 VAC NEMA 6-15P plug on power cable. Note 1: An optional plug-in module is available for the REM1045A series devices. It adds a secondary encoder/decoder circuit to provide an additional control line. Contact the Applications Engineering for details. Note 2: REM1045A series uses a 6P-MIL connector. This means that standard Datron MIL audio accessories do not require any adapters.

d. Programming Accessories

Datrons RC2 software is available to control and program the RT7000, including ALE parameters.

RC2-NG

Radio control and programming software for use on a desktop or notebook PC. Order cable C991974 for connection from the computer COM port to the ACC1 port on the RT7000.

e. Power Line Conditioners, Surge Suppressors, and Lightning Protectors

1. Surge Suppressors

Surge suppressers are used to eliminate short duration-high voltage spikes which could damage equipment. They do not protect you from voltage sags, brownouts, etc. Additional custom models are available. For more information, contact your Datron Representative. a. ACLP240-15 b. ACLP240-15SP c. ACLP120-15

ACLP240-15

Surge suppresser, dual phase, 240 VAC/15 A capacity. Contains two NEMA 6-15R receptacles and power cord with NEMA 6-15P plug. Surge let-through voltage: 700 Vp to 10 kA, 1000 Vp to +20 kA.

ACLP240-15SP

Surge suppresser, single phase, 240 VAC/15 A capacity. Contains two NEMA 6-15R receptacles and power cord with NEMA 6-15P plug. Surge let-through voltage: 700 Vp to 10 kA, 1000 Vp to 20 kA.

ACLP120-15

Surge suppresser, 120 VAC/15 A capacity. Contains two NEMA 5-15R receptacles and power cord with NEMA 6-15P plug. Surge let-through voltage: 400 Vp to 10 kA, 600 Vp to 20 kA.

Section 124


2. Lightning Protection Coaxial protectors must be mounted as close as possible to the antenna. They must be properly grounded prior to entering the building. a. CLP-N b. CLP-U

CLP-N

Coaxial lightning protector, N-type connectors, suitable for our RT line of radios. Includes an additional 6m length of RG213 coaxial cable. CLP-U

Coaxial lightning protector, UHF-type connectors, suitable for our TW line of radios. Includes an additional 6m length of RG213 coaxial cable.

3. AC Line Conditioning AC line conditioning is used to try to maintain a stable voltage at the input of power supplies. They are mostly effective against brownouts, voltage sags, and fluctuations (when generators are switched in). They do not protect from short duration spikes. For more information, contact your Datron Representative. Power line conditioners are both voltage and frequency sensitive. This is a custom product. Specify the following when requesting a quote:

Nominal ac line voltage (i.e., 220, 240, 120, etc.). Type of line voltage (i.e., single or dual phase, etc.). Frequency of ac line (i.e., 50 or 60 Hz, etc.) Maximum capacity (in Amps or VA). AC plug model (i.e., CEE-7-7, etc.) if n non-NEMA type is required.

f. Other Miscellaneous Accessories

1. RT7000FAN-1 Kit 2. RT7000IOX Breakout Box

RT7000FAN-1

External fan cooling kit for the RT7000. Mounts on the back of the heat sink. Mandatory for high duty cycle HF data applications. Note: Owners of existing RT7000s who want to add the fan kit should contact your Datron Representative.

RT7000IOX

A 4:1 breakout box for the accessory connectors. Allows multiple accessory equipment to be used with the same radio accessory connectors.

Section 125


9. Data System Accessories

Datron offers a complete line of modems, software packages, and other complementary data accessories to use with the RT7000. Note: Data accessories, data applications, and system configurations are described in detail in the Data Communication Products section of this catalog. Listed here are some common data additions to RT7000 systems using either Datrons 5300 high-speed HF modem or its E110A MIL-STD-188-110B modem. Note; Datron offers data packages built around the RT7000 HF Radio for use with any PC or notebook computer. Equipment can be located on a desktop, rack mounted, or shock mounted for mobile use. Software packages are available that provide for error-free data transfer, in addition to programming and controlling the radio system. Data system configurations are illustrated in detail in the RT7000-SYS drawings at the end of this Catalog Section. The drawings depict all the systems equipment and interconnecting cables used to add data capability to a Datron system configuration.

a. Rugged Notebook Computer

1. DT9400

DT9400

The DT9400 is a rugged lightweight notebook computer designed for those market segments demanding a portable computer platform offering superior performance, quality and expandability. The unit features an Intel Centrino, Pentium-M CPU, on-board RAM (memory), removable floppy, two PCMCIA card slots, and a removable, shockproof, high-capacity hard drive. A CD-ROM drive is also included. The display is a 12.1 ultra-bright color LCD with high resolution. A complete line of COM port and battery options is also available, as are expansion units that can be configured for either size ISA bus cards, PCI bus cards, or proprietary DWC high-speed modem cards depending on the application. Wireless LAN (802-11b/g) is also available. Contact Applications Engineering for additional items such as batteries, etc.

b. 5300 Data Equipment

1. RT5300 external Modem 2. DT5300C integrated notebook/modem

RT5300

Datrons RT5300 is an advanced digital modem using a waveform and protocol (X-Clover) specially designed to provide reliable high-speed data transfer using standard HF radio equipment. The RT5300 is a stand-alone model for connection to a computer that it is packaged in a rugged waterproof case for use in harsh environments. 3000 bps maximum data rate. ARQ and adaptive protocols. Order C992085 cable (interface between desktop computer COM port and the modem) and C992060 cable (interface between modem and the RT7000-ACC1) separately. The RT5300 can be used with either of two proprietary software programs. One is a simple data software program that provides point-to-point messaging capability for HF (RT7000, TW7000, PRC1099A) and VHF (PRC1077) radios, while the other is Datrons proprietary DatronLINK-Mail software program for use with the 7000-series HF radios; see DatronLINK-Mail section below.

Section 126


DT5300C

An integrated package made up of the DT9400 with an embedded 5300 modem. Order cable C992360 separately (interface between modem and RT7000-ACC1). The DT5300C can be used in a point-to-point system to send data messages, or in conjunction with Datrons DatronLINK-Mail software to provide the ability to send and receive E-mail, Faxes, files, and keyboard chat messages, and to allow radio network configuration and management. It comes standard with the DOS-based point-to-point application, or DatronLINK-Mail software can be ordered separately; see DatronLINK-Mail section below.

c. MIL-STD-188-110B Data Equipment

1. E110A Modem (for standard desktop PCs) 2. DT110 integrated notebook/modem

E110A

The E110A is a high-speed HF modem using MIL-STD-188-110A/B compliant waveforms to provide reliable, rapid, and accurate data transmission. Each modem consists of a size PCI card, designed to be embedded inside a standard desktop PC having appropriate performance capabilities. 9600 bps maximum data rate (with FEC). ARQ and adaptive protocols (when used with DatronLINK). A separately ordered cable connects the modem to the radio. The E110A can be used with either of two proprietary software programs. One is a simple data software program that provides point-to-point messaging capability for use with the 7000-series HF radios, while the other is Datrons proprietary DatronLINK software program also for use with the 7000-series HF radios; see DatronLINK section below. Order cable C992369 (audio, data, PTT interface between computer and RT7000 (ACC1) and cable C992370 (interface between modem and computer serial port) separately. Additionally, the 7000-series radio must have the 7000WB1 wideband filter option.

DT110

An integrated package made up of the DT9400 with an embedded E110A modem and DatronLINK HF E-mail software. The DatronLINK Software provides E-mail, FAX, file transfer and keyboard chat for HF radio users and Intranet/Internet (LAN) connectivity; see DatronLINK section below. Order cables C992369 and C992370 separately. Additionally, the 7000-series radio must have the 7000WB1 wideband filter option.

d. Data Software

Data software is offered that supports either the 5300 HF modem or the MIL-STD-110B HF modem. 1. DatronLINK-Mail 2. DatronLINK

Section 127


DatronLINK-Mail

DatronLINK-Mail is a powerful HF E-mail and messaging application that provides a gateway between the HF radio network (WAN) and the Intranet/Internet (LAN). The application provides the ability to send and receive E-mail, Faxes, files, and keyboard chat messages, and allows the user to configure and manage the radio network. It is designed for use with the 5300-series modems. DatronLINK-Mail is available in three versions. See the Data Communication Products section in this manual for further details.

DatronLINK

DatronLINK is a powerful HF E-mail and messaging application designed to automate message and file transfers over radio links, as well as to provide a gateway between the HF radio network (WAN) and the Intranet/Internet (LAN). The application provides the ability to send and receive E-mail, Faxes, files, and keyboard chat messages, and allows the user to configure and manage the radio network. It is designed for use with Datrons E110A modem and 7000-series radios. DatronLINK is the central control point of a radio-messaging network. It provides automatic station linking using either MIL-STD-188-141A compatible FED-STD-1045A ALE (7000ALE module) or MIL-STD-188-141B (7000ALE-141B module) for best channel selection and ARQ transmission protocol for error-free communications. DatronLINK runs on a standard PC with Microsoft Windows 2000 or XP and uses the Microsoft API-compliant encryption modules. It is supplied with a USB HASP security key. DatronLINK is offered as a core product with three optional modules. These options are Broadcast feature, Novell MHS support, and IBM Lotus Notes support. DL-Broadcast is an option to the core DatronLINK product that allows simultaneous transmissions to different users. Contact Datron Applications Engineering for more details. DL-MHS is an option to the core DatronLINK product that allows support for Novell networks. Contact Datron Applications Engineering for more details. DL-NOTES is an option to the core DatronLINK product that allows support for IBM Lotus Notes networks. Contact Datron Applications Engineering for more details.

e. Configuration and Ordering Issues

1. If a customer only wants the core DatronLINK product, then the part number is: DatronLINK-USB

2. If a customer wants the core product AND the Broadcast Option at the time of the DatronLINK purchase, then the part numbers are:

DatronLINK-USB DL-Broadcast

Section 128


3. If the customer wants the core product AND the MHS Option at the time of the DatronLINK purchase, then the part numbers are:

DatronLINK-USB DL-MHS

4. If a customer wants the core product AND the Lotus Notes Option at the time of the DatronLINK purchase, then the part numbers are:

DatronLINK-USB

DL-Notes

5. If the customer wants the core product AND both Broadcast and the MHS Options at the time of the DatronLINK purchase, then the part numbers are:

DatronLINK-USB DL-Broadcast DL-MHS

6. If the customer wants the core product AND both Broadcast and the Lotus Notes Options at the time of the DatronLINK purchase, the part numbers are:

DatronLINK-USB DL-Broadcast DL-Notes

7. If the customer already has DatronLINK, and wants to purchase the Broadcast option, then the part numbers are:

DatronLINK-Upgrade DL-Broadcast

Note: The Upgrade will only include the configured CD-ROM, the jewel case and instructions. The customer will use his existing HASP license key.

8. If the customer already has DatronLINK, and wants to purchase the MHS option, then the part numbers are:

DatronLINK-Upgrade DL-MHS


Section 129


9. If the customer already has DatronLINK, and wants to purchase the Lotus Notes option, then the part numbers are:

DatronLINK-Upgrade DL-Notes

Note: The Upgrade will only include the configured CD-ROM, the jewel case and instructions. The customer will use his existing HASP license key

10. If the customer already has DatronLINK, and wants to purchase both the Broadcast and the MHS options, then the sales order should list:

DatronLINK-Upgrade DL-Broadcast DL-MHS


11. If the customer already has DatronLINK, and wants to purchase both the Broadcast and the Lotus Notes options, then the sales order should list:

DatronLINK-Upgrade DL-Broadcast DL-Notes


Section 130


Broadband Antenna Configuration Diagrams The 6 diagrams shown on the following pages illustrate a few of the best ways to configure the ABB-series of broadband antennas. The drawings illustrate 3 basic installation configurations - a delta loop, a rectangle, and a diamond. Both the ABB100 and the ABB1000 can be installed in this fashion. Please refer to the diagrams for more details.

Section 131


Section 132


Section 133


Accessory Wiring Diagrams

Interconnect diagrams for connection of major accessory items to the RT7000 are shown on the following pages. These three diagrams illustrate the primary power, control, and RF cabling that is used to connect the accessory items to the transceiver.

Section 134


Section 135


Rack Equipment Configuration

The following table shows the rack heights for various equipment. Rack heights are given in U units, where one U unit is equal to 1.75 inches. 125W and 500W RT7000 systems use the RACK7100 rack, which is 12U in height. RT7000 1000W systems use the RACK7500, which is 19U in height. Blank rack panels are also available to complete the rack if the equipment doesnt use the full height. These panels come in either gray or green (OD). They have part numbers RP1 through RP9, with the digit indicating the rack height. To specify color, add the suffix G for gray and OD for green to the basic panel part number. Example: RP1G 1U blank panel, Gray RP2OD 2U blank panel, OD Green

Equipment Rack height (U=1.75)

RT7000 (all models, w/RT7000RM or RMS) 4U

RT7201 (all models w/RT7201RM) 4U

RT5300 (w/RT5300RMS) 4U

RA500D 5U

RA1000D 7U

UPF7000A (w/UPF7000RM) 3U

REM1045A-RM (& -220) 2U

RA400 (w/RA400RM) 4U

RAT1000P (w/RAT1000PRM-OD) 3U

Section 136


RT7000 System Configurations

Many different system configurations are available using the RT7000 as the core. They are shown in the following pages with all system components and interconnecting cables. 125W, 400W, 500W, and 1 kW systems are summarized below. The RT7000-12 or the RT7000-28 can be used in any of the illustrated systems with the proper power supply and cabling.

RT7000 System Descriptions System Part Number

RF Power Output

28 Vdc, Mobile Voice System with Whip Antenna RT7000SYS1 125W

28 Vdc, Mobile Voice and E110A-based Data System with Whip Antenna

RT7000SYS2 125W

28 Vdc, Mobile Voice System with Whip Antenna and Extended Control Unit

RT7000SYS3 125W

28 Vdc, Fixed Station Voice System with Whip Antenna RT7000SYS4 125W

28 Vdc, Fixed Station Voice System with Broadband Antenna RT7000SYS5 125W

28 Vdc, Fixed Station Voice and E110A-based Data System with Whip Antenna

RT7000SYS6 125W

28 Vdc, Fixed Station Voice and 5300-based Data System with Whip Antenna

RT7000SYS6A 125W

28 Vdc, Fixed Station Voice and E110A-based Data System with Broadband Antenna

RT7000SYS7 125W

28 Vdc, Fixed Station Voice and 5300-based Data System with Broadband Antenna

RT7000SYS7A 125W

28 Vdc, Fixed Station Voice System with Whip Antenna and FSK Remote Control Unit

RT7000SYS8 125W

28 Vdc, Fixed Station Voice System with Broadband Antenna and FSK Remote Control Unit

RT7000SYS9 125W

28 Vdc, Fixed Station Voice System with Whip Antenna and High-speed Remote Control Unit

RT7000SYS10 125W

28 Vdc, Fixed Station Voice System with Broadband Antenna and High-speed Remote Control Unit

RT7000SYS11 125W

28 Vdc, Fixed Station Voice and E110A-based Data System with Whip Antenna and High-speed Remote Control Unit

RT7000SYS12 125W

Section 137



RF Power Output

28 Vdc, Fixed Station Voice and E110A-based Data System with Broadband Antenna and High-speed Remote Control Unit

RT7000SYS13 125W

28 Vdc, Fixed Station Voice and 5300-based Data System with Broadband Antenna and High-speed Remote Control Unit

RT7000SYS13A 125W

28Vdc, Fixed Station Voice System with Whip Antenna and Pre/Post Selector

RT7000SYS14 125W

28 Vdc, 400W, Mobile Voice System with Whip Antenna RT7000SYS15 400W

28 Vdc, 400W, Mobile Voice and E110A-based Data System with Whip Antenna

RT7000SYS16 400W

28 Vdc, 500W, Fixed Station Voice System with Whip Antenna, Rack Mounted

RT7000SYS17 500W


RT7000SYS18 500W

28 Vdc, 500W, Fixed Station Voice System with Broadband Antenna, Rack Mounted

RT7000SYS19 500W

28 Vdc, 500W, Fixed Station Voice and E110A-based Data System with Whip Antenna, Rack Mounted

RT7000SYS20 500W


RT7000SYS21 500W

28 Vdc, 500W, Fixed Station Voice and E110A-based Data System with Broadband Antenna, Rack Mounted

RT7000SYS22 500W

28 Vdc, 500W, Fixed Station Voice System with Whip Antenna and FSK Remote Control Unit, Rack Mounted

RT7000SYS23 500W

12 Vdc, 500W, Fixed Station Voice System with Whip Antenna and FSK Remote Control Unit, Rack Mounted

RT7000SYS24 500W

28 Vdc, 500W, Fixed Station Voice System with Broadband Antenna and FSK Remote Control Unit, Rack Mounted

RT7000SYS25 500W

28 Vdc, 500W, Fixed Station Voice System with Whip Antenna and High-speed Remote Control Unit, Rack Mounted

RT7000SYS26 500W

12 Vdc, 500W, Fixed Station Voice System with Whip Antenna and High-speed Remote Control Unit, Rack Mounted

RT7000SYS27 500W

Section 138



RF Power Output

28 Vdc, 500W, Fixed Station Voice and E110A-based Data System with Whip Antenna and High-speed Remote Control Unit, Rack Mounted

RT7000SYS29 500W


RT7000SYS30 500W

28 Vdc, 500W, Fixed Station Voice and E110A-based Data System with Broadband Antenna and High-speed Remote Control Unit, Rack Mounted

RT7000SYS31 500W


RT7000SYS32 1000W


RT7000SYS33 1000W

28 Vdc, 1000W, Fixed Station Voice System with Broadband Antenna, Rack Mounted

RT7000SYS34 1000W


RT7000SYS35 1000W


RT7000SYS36 1000W

28 Vdc, 1000W, Fixed Station Voice and E110A-based Data System with Broadband Antenna, Rack Mounted

RT7000SYS37 1000W


RT7000SYS38 1000W


RT7000SYS39 1000W

28 Vdc, 1000W, Fixed Station Voice and E110A-based Data System with Broadband Antenna and High-speed Remote Control Unit

RT7000SYS40 1000W

Section 139


1. RT7000 125W Systems

Datron offers both mobile and fixed station RT7000 125W configurations. 1. Mobile configurations are designed to be used with narrowband (whip) antennas and automatic antenna tuners. They include vehicular mounting trays and brackets for all the equipment, and shock mounts for the larger, heavier pieces. They are configured to be powered from either a vehicle power source or an appropriate generator/power supply. 2. Fixed station configurations are 125W configurations designed to be used in a base station with either broadband or narrowband antenna systems. They use separate power supplies, which can be powered from generators or ac mains. These systems can accommodate both voice and data communications. A standard PC or laptop computer can be used with any of the data system configurations. For more information on data equipment in a system configuration, refer to Part E.9 (Data Accessories) of this Section of the catalog and the system illustrations that follow.

1. 125W PEP, 100W Avg.

2. Broadband or narrowband antennas

3. Voice & data capabilities

4. Data Systems to support both the 5300 HF modem and the MIL-110B HF modem waveforms

5. Remote control

6. Shock or rack mount

Section 140


RT7000SYS1. 28 Vdc, 125W, Mobile Voice System with Whip Antenna

Section 141


RT7000SYS1. 28 Vdc, 125W, Mobile Voice System with Whip Antenna

Item Quantity

Supplied

DWC P/N Item Description

1 1 RT7000-28 Transceiver, ruggedized, HF, 125W, 1.6-30 MHz, 28 Vdc (receive 100 kHz-30 MHz). Includes C991556 dc power cable.

2 1 RAT7000B Antenna tuner, automatic, 125W. Includes C991620 antenna lead.

3 1 MAR-16T Antenna, whip, 5m (16 ft.), with tilt-mount adapter. (Note: depending on the vehicle, any of the mobile whip antennas listed in Section E.4. a of the RT7000 section can be used in place of the MAR-16.)

4 1 MHS Handset, military style H-189/U-type.

5 1 C991505 Cable, RF, RT7000-28 to RAT7000B.

6 1 C992142 Cable, control, RT7000-28 to RAT7000B,.

7 1 UNIV-SM Mounting kit, shock, RT7000.

8 1 RAT7000B-SM Mounting kit, shock, RAT7000B.

12 Vdc Option (primary power source is +12 Vdc.)

Add 1 RT7000-12 Transceiver, ruggedized, HF, 125W, 1.6-30 MHz, 12 Vdc.

Delete 1 RT7000-28 Transceiver, ruggedized, HF, 125W, 1.6-30 MHz, 28 Vdc.

Section 142


RT7000SYS2. 28 Vdc, 125W, Mobile Voice & E110A-based Data System with Whip Antenna

Section 143


RT7000SYS2. 28 Vdc, 125W, Mobile Voice & E110A-based

Data System with Whip Antenna

Item Quantity Supplied


1 1 RT7000-28 Transceiver, ruggedized, HF, 125W, 1.6-30 MHz, 28 Vdc (receive 100 kHz-30 MHz). Includes C991556.

2 1 RT7000FAN-1 Fan Kit for RT7000.


4 1 MAR-16T Antenna, whip, 5m (16 ft.), with tilt-mount adapter. (Note: depending on the vehicle, any of the mobile whip antennas listed in Section E.4.a of the RT7000 section can be used in place of the MAR-16.)


6 1 DT110 Notebook computer, ruggedized, with embedded E110A modem and HF email, file transfer and radio network control application software.

7 1 701409-32 DC-DC converter/charger.


9 1 C992142 Cable, control, RT7000-28 to RAT7000B.

10 1 C992369 Cable, control, computer to RT7000.

11 1 C992370 Cable, control, modem and computer serial ports.

12 1 7000WB1 Wideband filter option for the 7000 radios.

13 1 UNIV-SM Mounting kit, shock, RT7000.

14 1 RAT7000B-SM Mounting kit, shock, RAT7000B.

15 1 701409-26 Mounting kit, shock, DT110WS.

16 1 7000ALE-141B Internal MIL-STD-188-141B ALE module with controller software.


Add 1 RT7000-12 Transceiver, ruggedized, HF, 125W, 1.6-30 MHz, 12 Vdc.

Delete 1 RT7000-28 Transceiver, ruggedized, HF, 125W, 1.6-30 MHz, 28 Vdc.

Section 144


RT7000SYS3. 28 Vdc, 125W, Mobile Voice System with Whip Antenna and Extended Control Unit

Section 145


RT7000SYS3. 28 Vdc, 125W, Mobile Voice System

with Whip Antenna and Extended Control Unit

Item Quantity Supplied


1 1 RT7000E-28 Transceiver, ruggedized, HF, 125W, 1.6-30 MHz, 28 Vdc (receive 100 kHz-30 MHz), extended control operation. Includes C991556.

2 1 RT7201E Extended remote control unit. 50 ft max.


4 1 MAR-16T Antenna, whip, 5m (16 ft.), with tilt-mount adapter. (Note: depending on the vehicle, any of the mobile whip antennas listed in Section E.4.a of the RT7000 section can be used in place of the MAR-16.)



7 1 C991943 Cable, control, RT7000E-28 to RT7201E.

8 1 C992142 Cable, control, RT7000-28 to RAT7000B.

9 1 UNIV-SM Mounting kit, shock, RT7000-28. (optional)

10 1 RAT7000B-SM Mounting kit, shock, RAT7000B. (optional)


Add 1 RT7000E-12 Transceiver, ruggedized, HF, 125W, 1.6-30 MHz, 12 Vdc.

Delete 1 RT7000E-28 Transceiver, ruggedized, HF, 125W, 1.6-30 MHz, 28 Vdc.

Section 146

RT7000 Series HF Tra

Commercial and Military Product Catalog(1)

Documents

Transcript of Commercial and Military Product Catalog(1)