Combustion & Industry Expert Panel Jeroen Kuenen, Carlo Trozzi 2015 Annual meeting Milano, 11 May...
-
Upload
karin-lawson -
Category
Documents
-
view
214 -
download
1
Transcript of Combustion & Industry Expert Panel Jeroen Kuenen, Carlo Trozzi 2015 Annual meeting Milano, 11 May...
Combustion & Industry Expert Panel
Jeroen Kuenen, Carlo Trozzi
2015 Annual meeting
Milano, 11 May 2015
Jeroen Kuenen, Carlo TrozziCombustion & Industry
Meeting agenda
14.00 Introduction
14.05 Emission gridmaps workshop (Marilena Muntean, JRC)
14.15 Wood combustion survey done in Italy (Ernesto Taurino, Ispra)
14.35 Solvent VOC emissions 2008-2013 (John Pearson, ESIG)
14.55 Socio-economic data in inventories (Damina Zasina, Kobize)
15.15 Short break
15.30 Guidebook update project, presentation and discussion
Task 1: Small scale combustion
Task 2.1: Improving PM estimates: condensable vs. filterable
Task 4: Improving the quality of SOx/SO2 and BC reporting
17.00 End of meeting
May 12, 2015
Jeroen Kuenen, Carlo TrozziCombustion & Industry
Emission gridmaps
Workshop organised by JRC EDGAR team on preparation of gridded
inventories under LRTAP
Materials from the workshop available for interested people
Possible use of EDGAR proxies for first gridding or as comparison
Follow-up possibilities, depending on the availability of funds
Examples of good practice
Possible further training
Improve the Guidebook chapter on gridding and/or providing best
practice
May 12, 2015
Jeroen Kuenen, Carlo TrozziCombustion & Industry
Wood combustion
New survey for wood combustion in Italy shows much higher wood
consumption figures
Small combustion now accounts for 70% of national PM2.5
Initial survey done for 1000 families, will be updated every 3 years,
taking into account regional and technological differences
Time series recalculation provides significantly higher PM emissions
all years in the past
Penetration of innovative technologies and pellet stoves are <10%
May 12, 2015
Jeroen Kuenen, Carlo TrozziCombustion & Industry
Emissions from solvents
ESIG made updated solvents inventory for 2013
Inventory based on
Solvent sales in EU (95% of solvent production included)
Estimate of solvent released to air per end-use sector
Estimate of imports/exports, assuming no net import/export in EU as
a whole
Results show overall 30-40% lower emissions than in current national
inventories, difference varies between countries
Discrepancies up till now not well understood – work on that to be
continued
May 12, 2015
Jeroen Kuenen, Carlo TrozziCombustion & Industry
Mercury spatial disaggregation – use of socio-economic data
Coal combustion important for Poland, with high emissions of mercury
How to spatially distribute? Two options:
Using age of buildings to disaggregate, assuming old buildings
having higher heat loss
Using LHDI (wealth, education, health) is an alternative to that
Results give quite different picture of emission distribution
May 12, 2015
Jeroen Kuenen, Carlo TrozziCombustion & Industry
Guidebook updates
Presentations from the consultant on their approach
Task 1: Small-scale combustion
Task 2.1: Condensables vs. filterables
Task 4: SOX/SO2 and BC/EC/OC consistency
Current status: collecting information from the TFEIP community
Some discussion in the panel, and some information was already
made available to the consultant
More to follow in the next few weeks, hopefully
The TFEIP community is encouraged to provide materials that they
have available to the consultant
Expert Panel will try to cooperate with the consultant to the extent
possible
May 12, 2015
Jeroen Kuenen, Carlo TrozziCombustion & Industry
Work plan for next year
Work with the consultant in the updating of the Guidebook, for as far
as possible
Continue the dialogue with ESIG on improvements of solvent
inventories
See what can be done with regard to gridding
cross-cutting, not only a combustion & industry thing!
Deal with ad-hoc queries that come up during the year
Assist in preparation and validate the final Guidebook chapters for the
2016 “update year” so it can be adopted
May 12, 2015