Combined Magellan Explorist Instructions
3
MAGELLAN EXPLORIST 110 INSTRUCTIONS Entering Coordinates: 1. Turn on GPS 2. Press BACK button 3. Select WAYPOINTS 4. Press MENU button 5. Select DELETE ALL, if old coordinates need to be removed 6. Press BACK button 7. Press MENU button 8. Selected ADD WAYPOINT 9. Select COORDINATES 10. Scroll to the coordinates and select the coordinate field (i.e., field above ELEVATION) 11. Scroll to the coordinates and enter data (i.e., Northing and Easting) 12. Select OK 13. Select NEXT 14. Scroll to the bottom and select SAVE DISK ICON 15. NOTE: the WAYPOINT name can be modified using the same approach (e.g., WP1) Finding Waypoints: 1. Turn on GPS, if not already on 2. Press BACK button 3. Select WAYPOINTS 4. Select WP1 or other saved waypoint, as described above 5. Press MENU button 6. Select CANCEL ROUTE, if GO is not displayed 7. Press MENU button 8. Select GO 9. Press BACK button 10. Select DASHBOARD 11. Proceed to WP1 or other saved waypoint 12. NOTE: Direction arrow is only correct while you are moving Finding Next Waypoint 1. Upon arrival at WP1 or other saved waypoint, press BACK button 2. Select WAYPOINTS
-
Upload
jeremy-patrick -
Category
Documents
-
view
17 -
download
0
description
Magellan Explorist Instructions!
Transcript of Combined Magellan Explorist Instructions
MAGELLAN EXPLORIST 110 INSTRUCTIONS
Entering Coordinates: 1. Turn on GPS2. Press BACK button3. Select WAYPOINTS4. Press MENU button5. Select DELETE ALL, if old coordinates need to be removed6. Press BACK button7. Press MENU button8. Selected ADD WAYPOINT9. Select COORDINATES10. Scroll to the coordinates and select the coordinate field (i.e., field above ELEVATION)11. Scroll to the coordinates and enter data (i.e., Northing and Easting)12. Select OK13. Select NEXT14. Scroll to the bottom and select SAVE DISK ICON15. NOTE: the WAYPOINT name can be modified using the same approach (e.g., WP1)Finding Waypoints:1. Turn on GPS, if not already on2. Press BACK button3. Select WAYPOINTS4. Select WP1 or other saved waypoint, as described above 5. Press MENU button6. Select CANCEL ROUTE, if GO is not displayed7. Press MENU button8. Select GO9. Press BACK button10. Select DASHBOARD11. Proceed to WP1 or other saved waypoint12. NOTE: Direction arrow is only correct while you are moving
Finding Next Waypoint1. Upon arrival at WP1 or other saved waypoint, press BACK button2. Select WAYPOINTS3. Select WP2 or other saved waypoint, if previously saved4. Press MENU button5. Select CANCEL ROUTE, if GO is not displayed6. Press MENU button7. Select GO8. Press BACK button9. Select DASHBOARD10. Proceed to WP2 or other saved waypointMAGELLAN EXPLORIST 100/210 INSTRUCTIONS
Entering Coordinates for Point of Interest (POI):1. Power On 2. Enter Coordinates for Point of Interest (POI)3. Push MARK button4. If no FIX, enter YES (Enter)5. Joystick & Enter 1 (name of 1st location)6. Location, Enter 7. If UTM, Enter (UTM Hemi North)8. East Joystick (Left/Right to select number)9. Joystick (Up/Down to change number)10. Enter11. Repeat for North12. Save Point of Interest (POI)Finding Point of Interest (POI):1. Push GOTO button2. Joystick, select My Points of Interest, Enter3. Joystick, select name of POI, Enter4. Push NAV button to compass screen5. NOTE: Direction arrow is only correct while you are moving6. Go in direction Black end of Arrow is pointing7. Note Distance to Next POI
USEFUL INFORMATION: UTM stands for Universal Transverse Mercator. UTM system was devised by the Military as the best way to draw the earth, which is round, on a flat piece of paper. Its sufficientalmostto understand that UTM is a standard means of stating ones position, or any position on earth, by giving two numberscoordinates, theyre called. The first number is the easting, and, as youve guessed, it tells you how far east you are. The second number is the northing.
